The portable headphone amplifier is lightweight and portable, and can output great sound. Load Impedance is 160-300 more than 15 hours. The headphones have a bass boost and a high/low gain switch. 3.5mm AUX input and output. Works for Sony, Sennheiser, and beyerdynamic headphones. It is not safe to use it while charging and the current will make noise.
👤Even though I have to have the volume maxed out most of the time, the amplifier does help me find headphones or earbuds that are loud enough for me to hear the sounds from my phones, tablets, and TVs. It does the job for me and can be a bit bulky. There is a Over a month, this has been used nearly every day and still on its first charge. I am happy that I can hear the tv while on closed caption because sounds tend to be muffled with volume all the way to max.
👤I bought headphones for gaming. I thought I'd try this little amplifier for a boost in volume. What a difference in volume! It sounds like I'm shooting a shotgun at something. This is a good solution to your headset.
👤I got a new phone when I cut the grass, but I didn't use my noise cancelling headsets. The max volume is being lowered for protection. Even with noise cancelling headsets, I couldn't overcome the noise of the mower engine. I needed a little more volume. Back to what it was before the new phone. This product was perfect for my needs. There is enough volume for me to mow my lawn and listen to music via my noise cancelling headsets, as well as my new phone. Not sure of the battery life. Only used a few times. I am happy with the performance of this product.
👤I am not using this as a headphones amplifier, mostly to amplify the output of my mp3 player, which is in my home stereo receiver. The output is amplified by about double. I wish it went louder. I can turn my mp3 player down a bit and save battery life now that I don't have to crank my amplifier as hard. I would definitely recommend this unit.
👤It's so far very happy with the battery life that I'm not sure how durable it would be. I use this one to listen to my phone while I drive. The battery life is as advertised and it works as expected.
👤Quality materials were used to make this unit. Not cheap plastic like a lot of others. Even at max volume, my ear bud's sound was very low. I am glad I tried this out because I can listen to whatever I want. I use my PC and portable devices. Work has a long lasting battery. Thanks for making a good product.
👤I plug it in half the time and it's dead. She died most of the time because of a bad cable. I wouldn't pass on this one. The female plug is broken.
👤I use it to watch videos on my laptop while my wife sleeps.
Amplifier for Headphone can be compatible with a variety of digital devices with 3.5mm output. Hifi Headphone amplifier supports most headphones of high impedance 16-150, 3.5mm AUX Input and Output, signal-to-noise ratio> 100Db, THD + N, fully filter noise, enjoy high-quality audio. It is suitable for your existing wired headphones, earphones and even speakers and is designed to deliver studio-quality sound to your ears. It has achargable battery that can stay working for more than 8 hours. There is a volume control knob. Two-stage gain switch The signal input into the amplifier circuit is enhanced for optimal performance of the headphones. It's possible to make it possible to output louder sound and a sharper sound. The amplifier is compatible with a variety of digital devices, such as mp3 players, mobile phones, computer, CD players and personal media players.
👤The unit is making a clicking sound. I can hear a charge coming from the inside. When the unit is in the pocket, it cuts out when in the computer, and the play will not resume unless I play/pause the cell phone. I use a new phone with the latest version of the OS, and this doesn't happen on either of my other devices. I will return the unit. --- There is a The unit is wonderful. There are three flaws. The auxiliary cable is one of the best looking cables I have ever seen. It's unfortunate that the poor internal construction can't be used. The other reviewer is correct. They would just send me trash. If the unit can't be used, just throw it away. 2. I would like to see a DAC built into the charging port. There is a $5 price for a USB DAC. This would add a lot of value. 3. It needs a high quality audio. There is support for aptX. I would like that in this receiver as well. There is a If they spent another $0.50 on a useless 3.5mm cord, and the unit had a DAC and aptX, we'd be talking about mid-ranger gear. You would be talking about a $200 unit if they added play/pause next/back buttons. The market would be killed with another $10 of hardware. It was a missed opportunity.
👤These changed how I listen to music. Most cell phones can't put out a higher impedance, so I use them with the Sony MDR-7506. The Neoteck amplifier is rich, full sound, like nothing you've ever heard. They won't fix clarity. The reproduction of the amplifier will be distorted if it can't put out clear sound. The feature is limited by the medium. It's not as clear as hooking up an auxiliary cable. There is a The supplied auxiliary cable is not very stable. Loud crackles can be heard through the headphones if you move it even slightly. You can easily solve it by using a third-party cable. It's hard to overstate how much this is for someone who cares about sound quality. It's a no-brainer. If you don't have an immediate need for it, keep it in your collection. You will not be sorry.
👤I miss the 3.5mm jack on the I-phone. I tried several things. These did not have enough juice to drive my headphones. I used the pre-amps for my portable amplifier to connect to the internet and upgrade the sound quality. I had to deal with mounting, connection and equalization issues while it worked. There is a The Neoteck NTK106 is the best answer because it provides decent amplification in one neat package. I'm very happy with it. I can't wait for Neoteck to come up with an update with more juice and balanced output. My friends will find this Neoteck in their stocking. Thank you Neoteck.
👤It stopped playing music through the right channel when I used it for a few months. If I connect straight to the phone, there are no issues. I won't have the right audio. It will crackle or return for a few moments because of the cord moving in the sockets. It was great until that issue. I haven't had a chance to check if it's just the combo of the headphones and the amplifier, but the implication is that the amplifier has a defect. The audio jack doesn't work anymore. Sometimes playing with the dial and jack can sound like it's playing music. It's just a brick now. Spend more for something from a company with a good reputation.
The ThX CERTIFIEDAUDIO OUTPUT is exclusive and designed for low-bandwidth distortion. Unlike other mobile MQA-DAC designs, the HELM BOLT physically isolates the DAC from theusb port for improved EMI isolation and uses a three-sorrow design for superior frequency lock with dramatic improvements over single-sorrow designs. The design is simple but powerful. The silver body has been carefully designed to make it compact and classic. This amplifier is easy to use. There is a switch for adjusting gain and another for fine tuning bass levels. The needs of bass lovers are met. The OPA1642 chip handles low-pass filter duties. Hi-fi music can be streamed to your stereo system with the 3.5mm input/output jack. The drive is high-performance. Up to 12 hours of use is possible with the 2200mAH internal battery. The sound is without distortion. An 18-month worry-free warranty and friendly customer service are what you get with the N2 Headphone amplifier x1, User Manual x1, and 3.5mm to 3.5mm cable.
👤I would rate it 5 stars, but I would like more control over the bass. It's as good or better than anything else in its affordability range, even though an on/off setting doesn't adequately account for the different types of headphones or the mastering/ sound quality on the different files. The N2 does a great job of enriching the sonic presence of virtually everything I listen to, or at least taking up the slack for the various headphones that are inherent to the various headphones. I use that. It's very stylish, portable, and versatile, and feels cool in the hands, though a tad too slick for those of us with old man fingers. I bought two of these little guys for my collection of little music toys. Baby Boomer issues. Don't get me started!
👤When I used my phone to play music, my truck radio didn't have enough volume. I bought this hoping to change it. That is defeated in high quality sound. You need to balance out the sound between the radio and amplifier so you don't blow out your speakers. The gain and bass switches work as expected. I don't leave the bass on all the time because it's so deep and rich and I'm afraid for my speakers, so I only use it on certain songs and turn the volume down just in case. This is a very good product. It is built like a quality item and does exactly as it says. I tried this unit and it was so loud that I turned it down immediately. Great product and great seller. All the way!
👤This is a handy little amplifier. It's light and small, but I wouldn't be comfortable using it for long periods of time, especially for activities like jogging. I use headphones to listen to my guitar. I route the output of the mini earphone amplifier I have plugged into my guitar into his Fosi Audio N2 for additional amplification. I use the Fosi to keep the volume on my mustang micro very low to save my battery and reduce distortion. I'm grateful that more device manufacturers are moving towards the power standard of theusb-c, and that charging the device is easy. I've only used this for a short time, but it has held its charge well, without needing to be charged again. There is a The knob has a nice feel. The switches for gain and bass are small, but sturdy for their purpose. I'm not sure how much abuse the switches could handle, so don't let toddlers play with this amplifier. I like the fact that a gain switch is included. I don't use the bass switch much for playing guitar. It adds a little more "oomph" to the bass lines in pop music.
👤When driving higher volumes or when the bass is on, this amplifier clips. It's a sure sign that the headset isn't powered up enough. The sound quality is abysmal compared to the schiit magni. The magni has a lot more power and headroom, which allows for deep phat bass response, wide soundstage, and controlled buttery mids and treble. The factors sound like cheap headphones with this mobil fosi amplifier. If you've never had a proper amplifier, you'll be fine with this, but don't expect any real performance out of a hifiman 4xx, it's half-assed. I'll probably get a portable power bank that's capable of 3amp output to pair with the schiit hel 2.
It's perfect for home theater, teaching, training structure, conference rooms, appliance stores, and other places. A power amplifier specially designed for headphones with an impedance of 16-150, with a signal-to-noise ratio> 100Db, THD + N, which can fully filter noise and enjoy high-quality audio. A portable headphone amplifier. High quality headphones audio cable with gold plated interface, improve your 3.5mm headphone output sound quality and tone color, create a more realistic stereo output. The 1500mA battery can work continuously for more than 8 hours after a full charge. The Durable Headphone Amp has a shield and a frosted surface to give you a comfortable hand-held experience. The portable headphone power amplifier is compatible with all mp3/ mp4 players.
👤I have lost 80% of my hearing. I was surprised by the Proster Headphone Amplifier. Watching TV with my headphones on is clear and clear in the background with no noise, hissing or humming. My previous amplifier devices from KOSS never worked as well or lasted out over time. The amplification and high quality cabling are outstanding. A full charge will last over eight hours. The only question left is if the battery can be changed or upgraded. This product is very good.
👤I am hearing handicapped. I took a chance on this unit and it works great. I can increase the sound level with no negative feedback, thanks to my audito technica ATH M 50 TX. If this is your problem, it's highly recommended. I would love to connect my hearing aids to this.
👤I received a unit in a generic box with photocopied instructions and it was marked Trasam. I don't know if it's a knock-off or if the same unit is manufactured for multiple name brands. There is a The sound quality of the unit I received is terrible. I get distortion when I turn the volume on the amplifier up because I get the maximum volume with my phone. There is a My headphones are rated for 3000mW so they aren't being used much. It's not an issue of them being under-powered because I can max out the volume on my devices with zero distortion. The FiiO A1 has about 60% more power and is the same price as the one I used. There is a It was worth a try.
👤This item does what it says it will do. When the battery went dead, I plugged it into a 1/2 Ampusb charging port. I made a holder to hold it upright so I could turn volume to zero with one hand. I have a slot underneath the amplifier that I can use at the same time. The volume control has a charging plug in on it. The cable has a charging port.
👤I bought this because the computers we have at work have poor sound levels when using headphones. It's hard to hear a training video being played when other people are walking in and out of the office. I would use it to hook it to my phone when I go for walks so I don't use as much of the phone's battery. I'll see if it can boost the output from a TV that has no audio input and just use the audio outputs. It sounds good and I have used it for the first time. I used a 50% amplifier to boost it to a good listing volume after I hooked it up to a small portable radio. I connected it to my computer to listen to music. I plugged it into my audio card and played a bunch of songs from Songs From The Big Chair. I am playing at 50% volume. I turned everything down to 45% after the amplifier was at 50%. Without the amplifier, I set it to about 85%. There is a The volume with no input is not good when turning it up and down. Maybe it's time for the potentiometer to take a break. There is a There is a crackling pop when I turn it off. I have used bigger stage Amps that pop when turned off but newer Amps have a "Soft Off" to prevent that pop. It might be too much for a small amplifier at this price point. It would be nice. There was no input at max volume.
There are power supplies for four head phones. Up to four pairs of headphones can be powered by the Pyle Stereo Headphone Amplifier. Four people can listen to the main mix in your studio. Independent volume controls. The dedicated output level controls allow each listener to determine their own volume level. Independent channel volume knob control for each listener. Also has a power ON indicator. 14” TRS output jacks. The headphones splitter has 4 14” stereo headphone jacks which allow you to control up to 4 headphones at the same time. The source input jack for the Pyle Pro mixer is also included. The audio quality is superb. The PHA40 has 4 high powered stereo Amps that are capable of maintaining the highest sonic quality even at maximum volume levels. The ultra-low noise operational amplifier is included for outstanding audio performance. COMPACT size is small. The professional integrated headphone receiver is easy to carry and use on the road. It's perfect for both on-stage and in- studio performances.
👤Before buying a few to try out, I read a lot of the reviews. There were a lot of people who gave the unit five stars and were completely satisfied with what they got for the low price. There were a few one-star reviews where people said that the amplifier didn't amplify the signal at all. There were also complaints that the jacks were unreliable or mis-sized and that you had to have a plug inserted into the jack to get proper stereo. There is a The very similar Behringer HA400 was also sold on Amazon.
👤When something is described as being, but does not do so, it only deserves a single star. Why? I don't understand why people give 2 or 3 stars to products that don't live up to what they're said to be. J-Sigmo says the parts are worth it. The product is not a collection of parts but a headphones amplifier. 1 star is required. The stars and not the details are what others will see if anything else is put on. A restaurant will tell you that they have all beef burgers, but you will find out they are not all beef. Do you now give 2 or 3 stars? Absolutely not. I checked it before I dismantled it for my project. I found out about it. I wanted to see how well it would run at 9 volts. I used to have a similar product from Behringer that worked fine at 9 volts, but it was removed from the power source. J-Sigmo's Dec. 2, 2015 Amazon review observations are useful. I found over 16 volts before the diode while I was checking the voltages. The wall wart power supply that I checked was 18 v, and the circuit board has a 1000mfd capacitor. The maximum rating of the 4580 chip is 18 v, but it has a 35% error. The little power indicator is now passing 70ma due to its 220ohm current limiting resistor. I am wondering what kind of quality control they have here after J-Sigmo observed that there are 470 ohm instead of 47 ohm resistors. I threw away the power and audio jacks because they were very low quality. Some people have problems with this product.
👤Not sure what the reviews are about. I tried this on my PC to get more volume out of my headphones. I have the correct plugs. I plugged it in from the PC to the amplifier. I plugged my headphones in correctly. I tried all four outs on the amplifier, and it didn't change the volume at all. What? The device gives you four audio outs from one source and a physical turn knob for the volume from it. It doesn't amplify the audio. It was tried on 3 different computers. All three results were the same. There is a It's a good device for splitting a single audio source into four, but does not amplify the audio. It's complete waste of money. It feels solid.
The AC 12V 300mA power adapter is included with the 4-Channel Headphone Amp. When powered on, the amplifier has a light indicator. Load Impedance: 160-300 is used for the headphone amplifier. The headphones have a high/low gain switch. The portable headphone amplifier is portable and can output great sound. Audio output is 3.5mm Jack. Headphone amplifier works with beyerdynamic headphones. You need to buy it yourself, the 3.5mm cable is not included.
👤The power light does not come on. There is an update. The power light started working after I dropped it. It's green. And bright. And blinks. The blink rate of the light is related to the charge on the battery.
The input for the headphones is compatible with most line-out players. The output is compatible with most earphones. The Blucoil 4-Channel Headphone Amp can provide up to 4 independent headphones. It's compatible with 3.5mm inputs. Control the Canals. If you want to adjust the volume of the connected headphones, you have to use the individual volume control knobs. There are offers of STEREO to Mono Swing. The stereo-to-mono switch can be used to change the stereo signal to mono. Listen up the audio! - The channels give up to 20dB gain. The low output impedance of the amplifier gives you enough power for your headphones. This allows your headphones to perform at their best. The AC 12V 300mA power adapter is included with the 4-Channel Headphone Amp. When powered on, the amplifier has a light indicator.
👤I have two desks, one for work and one for play. The gaming desk has a bass shaker and a set of self-powered speakers. I have headphones for when booming audio isn't appropriate. I've spent $50 on different audio splitters to try and get the audio signal from the pc to the different outputs. The power output from the pc soundcard to the various speakers when used simultaneously is barely providing enough signal strength to power the buttkicker. I wanted something where I didn't have to plug in the outputs. This thing does what I need it to. Everything is connected with a constant volume control and plenty of power to push a strong stereo signal to all the outputs. It works as advertised, and is one of the best investments I've ever made.
👤When I got my headphones. The output from my computer was not loud enough for the phones. I have a set of headphones and speakers for listening to things on the internet. I can set individual levels for each of the three speakers, instead of having to individually change the volume every time I switched listening mode. The sound quality is good. It's convenient to use either a mini or a mini stereo plug to route the outgoing signals.
👤I'm picky when it comes to my music and after doing comparisons with and without the amplifier in the loop, I couldn't hear any difference in the sound. There is a When I hear a difference, it's when I turn them up. ... They get louder than my phone. I've tried it with 2 headphones and it pushes both. Excellent quality is what it is. You will not regret the purchase.
👤I bought this to see if I could use it to change the volume in my ears. The output on the radio was connected to the input of the splitter. If you want to use the headphones or earbuds with the Y cable, you have to hook it to the 2 output ports. This works well and gives you control of both sides. This works on my other devices as well. It's not marketed for people with hearing loss.
👤The monitoreo de grabacin has mucho ruido, puedo llevar el volumen. No sea tan, afortunadamente. No necesito ms volumen. There is a There are 8 audfonos (cuatro de 1/2 and 3.5mm) in el material.
👤I am able to play the piano while others listen.
👤This product is not supported by the company's customer service department. The user manual doesn't provide a phone number for customer service.
👤Increased the volume of headphones.
The headphones with a high-quality microphone are able to eliminate ambient noise. You don't have a microphone, but the headphones have a build in microphone, and a clear voice. Hifi Headphone amplifier It supports most headphones of high impedance 16-300, 3.5mm AUX Input and Output, signal-to-noise ratio> 100Db, THD + N, fully filter noise, enjoy high-quality audio. This Headphone Amp enhances the signal input into the amplifier circuit for the optimal performance of the headphones. It's possible to make it possible to output louder sound and a sharper sound. The headphone amplifier can stay working for more than 12 hours with the 2000mAH capacity of the rechargeable battery. There is a volume control knob. It is lightweight and portable. A sleek, sturdy shell and Chassis allow for a durable use, which is why this headphone amplifier is designed to enhance your music listening experience wherever life takes you. This amplifier is compatible with a lot of digital devices, such as mp3 player, ipod, iPad, computer, CD players and personal media players.
👤It's worth the money. My brain won't shut down if I sleep with sound or white noise. Some shows do not have the volume levels to hear what is being said. I will not watch if I have to watch with subtitles. Over the years, I have purchased many inline headphones volume controllers. I am happy to recommend this item to others after reading the reviews. The low gain switch has enough volume for the sweet spot. The high gain switch makes it easier to hear clearly for people who talk lower on other shows. My first thought was, where have you been all my life? If you like watching TV in bed, then you should switch to this HiFi headphones amplifier. I will be purchasing a second one for when I travel, I love this amplifier. I hope this helps you as well as I did.
👤This helps my drums to drive my headphones and sound great. I don't notice the added noise from the amplifier. 2000 The board was taken out of the solid aluminum case and the battery lasted forever. Highly recommended. . I knocked off one star because the amplifier doesn't provide a flat response, highs are a tad emphasized and nothing that can't be fixed. There is a Also. It is a shame the company has branded this nice chassis so boring. Even a small substitution of the top or bottom side of the device would make it appear more high end. Great little Amp.
👤I am tired of the FCC telling me that my computer can't play music, and the Government telling me that my computer can't play music. It works for games. It doesn't have to be loud all the time. I could tell you more. Is my new computer? Awesome. Games, frame rate, etc. Do you play music? A mouse is in a shoe box. Is it possible to play it on my old Windows Vista? Is it a new computer? How much is $1899? The sound is bad. Got a device. The computer could play music. So well. It is high Fidelity. Amazingly so. It made me happy. There is a First with my travel headphones. Magnets couldn't keep up. Then my pro's. Awe. It's so good. There is a It's not volume. fidelity is what it is. Get this thing...
👤I use this to increase the volume of my phone audio. The last time I flew, I wanted to listen to audio books. The background noise in the plane made it hard for me to hear what was being read. This will fix that problem in the future. The signal is noise free.
👤It was bought to help pump up the audio on the radio receiver so that it could be heard through headphones. The max audio volume decreased after this was installed. That is on the "H" setting. What little audio was there before was gone on "L". There is a Once it is amplified, it becomes inaudible. Doesn't matter if it is charged or not. You can experience different levels of quiet. I can only assume that the thing is junk because the impedance values are within the limits. Returned.
This amplifier is compatible with a lot of digital devices, such as mp3 player, ipod, iPad, computer, CD players and personal media players. It supports to convert Optical, Coaxial, Digital Audio Signals Input, Output, and 3.5mm Jack Audio that are connected to the amplifier, Speaker, Headphone. A high- performance chip. The latest version of the wireless communication technology, calledBluetooth version 5.0, has a dedicated antenna for stable signal transmission. It is possible to pair with mobile phones and tablets via Bluetooth for audio transport. It's not a transmission with a radio. The built-in high- performance chip supports 32192K/24bit Sampling Rate. The volume adjusting knob can be turned on and off without being plugged in. You can use it as a Hi-fi amplifier with the volume control, and it also supports the phone call function. You can use the button to control the call if it is called. It's perfect for home theater, teaching, training structure, conference rooms, appliance stores, and other places.
👤I haven't been impressed with any of the differentBluetooth receivers I've tried. Decided to give this one a try and was very impressed. The sound quality is great, it is very quiet, and I love that it has a volume knob. The ones I have tried are too quiet, and with the high gain and volume, I am able to boost the volume and keep the background noise low. I don't know how well the other inputs work. I am very happy with the price. The volume pot feels cheap and I wish I could connect multiple devices to it and use the input switch to select between them. I will never use the optical and coax inputs. Both of those are small quibbles, especially for how much I paid. I will probably be buying a couple more stereos for my other ones. I have been listening to it for a few days now and I wanted to add a couple items to my review. 1) The sound quality on the small stereo system is indistinguishable from plugging directly in, and I am listening to a 25 year old Sony receiver and Bose speakers, so hardly a hifi rig. There are two more The range is poor. I was hoping the range would be increased with the antenna. This is limited to the 15 foot range of many devices, and not really the case. I understand that they chose to emphasize sound quality over range. I was a little disappointed that I couldn't have both range and sound quality. There is a I think this little accessory is an amazing deal. I contemplated taking a star off for the disappointing range, but I couldn't justify that for the price. I feel justified in giving it 5 out of 5 stars because it performs well above expectations for money. I would have needed to see an increase in the range to justify the 5 stars. It's highly recommended for situations where sound quality is more important than range.
👤I really wanted to like this device but there were some problems that I wasn't sure if it was the fault of the device alone. It was only a matter of time before I brought my old Hi-fi system into the 21st century. You think it would be simple and in a lot of ways, it is, but somewhere in the audio processes something went wrong and I am not sure where. I don't think the answer is obvious, but I think it is. I will tell you what it is, but not before we get ahead of ourselves. There is a The MBR is an audio device that allows the user to connect non-Bluetooth devices to the MBR and play audio from them. Similar to most basic devices, setup is simple and has the same controls for audio gain and volume. I will leave it up to the product description page, but it can play back all but the most compressed audio files without losing audio fidelity. The simplicity is highlighted in almost every part of its manufacturing. What about the audio performance? This is one of the many devices that needs to be personally experienced because of objectivity and we will have a different idea of what sounds good. In my case, I connected the MBR to a home theater amplifier and was somewhat underwhelmed by the performance. Everything sounded muffled as if the tone control was set to low and the volume was raised on the MBR, which resulted in microphone feedback. It is easy to fix the feedback problem, but any solution to tone controls seems impossible. There is a I am not sure if it is the fault of the device alone. I connected the amplifier to the MBR. The 160Kps limit is a compromise between space and audio fidelity. The player I used.
You need a 3.5MM to If you want to track more than one musician at once, or if everyone in a group wants to listen to a song, you need a monitor distribution system. The compact, flexible PH03 can power up to four pairs of headphones. The upgraded version ofPH06 has a power switch and 3.5 MM headphone output. When a recording session calls for everyone's heads and ears to be in the game, the PH03 is the perfect solution and a real money- saver. The 4 independent stereo high-power amplifier sections in the PH03 maintain the highest sonic quality even at maximum volume levels. The same opamps found in full-size audio equipment are included for outstanding audio performance. The Ultra-Compact Design is a simple solution for studio and stage applications. You can power four of your headphones at the same time with this super-compact amplifier. Let up to 4 people in your studio listen to the main mix while recording, and each of them can choose their own volume level using the dedicated output level controls. Their worry-free 18-month warranty, and friendly customer service are what you get withPH06 Amp.
👤It gives a lot of power to the connections. I wanted to hook up my old 2.1 set with the set I bought for 2.1 but the volume was being sacrificed by the shared connection. I decided to purchase it to see if it helped. There are two sets of 2.1 speakers that have full usage. I'm afraid they will blow as I imagine they will. I connected 2 single 40w speakers along with 4 others as a test and all of them had full volume. The performance of each would be weakened by a direct connection. I'm happy with the performance and it's unbeatable.
👤I have good headphones that have different impedances from 20 to 150 Ohm. There is a Each headphone has its own sound, volume, and special needs because of the external noise. There is a Each person could use a different volume and adjust to their own preferences. There is a My mother is not hearing well. She likes to watch movies or the news with me. She liked it a lot and we have used it. She adjusted the volume to her needs and I did the same, it solved the problem. It's recommended for other purposes as well.
👤I bought this so I could listen to the same music with my friend. All I was looking for was fidelity on the ports. The volume controls are convenient. It's not possible to ask for more given the price. My only suggestion for improvement would be to have the input on the back side and the outputs on the front, which would make cable management easier. I wouldn't call it portable since it requires a wall outlet, but that's not an issue for me.
👤The newer model of ROKU allows listening through headphones, which we replaced with a newer model. It's not designed for multiple headphones, and the remote has to drive them. If you want to watch something on the ROKU with someone else, you need something like this. It allows each listener to set their own volume, which is a real benefit. What can I say about wire management? I'm not saying that it's perfect or that it's an excellent amplifier, but it's really good for the price, and it solved the problem at hand.
👤I am using this to manage audio source feeds to mini-stereos in different locations in my house, it works great sound quality is good, helps compensate for signal loss from multiple extra long cables. I discovered that two of my cables and one old splitter were bad and this helped me single them out.
👤My TV has a very low analog output, so my speakers sounded very low, especially with videos on websites like YouTube. There is a This is what I needed. There is a This is not a turntable amplifier.
👤This works great because I have my music headset, gaming headset, and PC speakers all hooked up. No need for an accessory!
👤The product is well built and has good volume control for two of the four dial options, however, the other two have static at low volume and one knob barely works. I am giving a low rating because I reached out to their customer service two weeks ago to see if I could get a replacement, but have yet to hear back from them.
A simple user interface. It is lightweight and portable and can be carried. It's possible to make it possible to output a sound that is more real and less distorted. While the aluminum matt surface makes it durable, it provides a comfortable handheld feeling. It has a Rechargeable battery that allows it to stay working for more than 8 hours. It can be compatible with a variety of digital devices, such as mp3 mp4 mobile phone computer, which may lead to noise.
👤When the amplifier arrived, it was faulty, but Julie from Neoteck was kind enough to send me a new one. I'm very happy with the new one and the service from Julie. There is an update. I have to take three stars off because the replacement was not good. The sound stopped when I was listening to the music. The device had a red light when it was on. No luck trying to power it off. The power cable was disconnected and reconnected. The amplifier is dead. Julie from Neoteck was kind enough to give me a replacement and I won't return it. The service from Neotock is excellent but I think that buying the amplifier is a bit of a gamble, I have had two and both failed after a few days. There was an update on Sep 6th. The reason I had a poor experience with the amplifier was because I was listening to music while it was plugged into my PC via the charging cable and it was getting so much static and noise. I found it in a drawer and tried again. Same problem. The noise stopped when I unplugged the power cable. I have a messed up head. This is a really good little amplifier and a real bargain. Sound goes up to 11!
👤I was unsure if the amplifier would fill the bill. Boy! I was wrong. Even though it only outputs 40 kilowatts, it can blast your music with no distortion. I wouldn't use it for anything other than a headphones amplifier, but I was surprised it did a great job. The HD6 Mix headphones have an impedance of 150 ohms, which can be difficult for some cheaper amplifiers to drive to a decent volume, but this amplifier has no problems. Good job Neoteck! There is a I was an electrical engineer. I took a tour of the unit. The OPA604 operational amplifier ICs are from the venerable Burr Brown. It was tough and precise. It is designed for amplification. There is a The HD6 has a Hell of a bass floor that can be kind of boomy. When they were plugged into my PC, there was no volume. I bought this amplifier to combine with the MiniFBQ to take out some of the boom. I have been very pleased with both units. If you want to use the MiniFBQ, you'll need to get some adapters because it only has 1/2 inch and RCA jacks. If you use a good quality charging device, you can leave it plugged in all the time so you don't run out of juice. No noise, no hum. I'm using an old phone accessory. I tried plugging it into the PC and it was loud. Don't go there.
👤On 4/12/2018, it was purchased and delivered. There is a The unit was built well and worked well until today, when I noticed that it wouldn't work for long and would shut itself down. When I cycle the unit off and on again, it works for 5 seconds before the sound stops. It stopped 30 days after delivery. I only use it on long drives twice a week, but if I used it daily, it would be one thing. There is a This is not acceptable. I couldn't find any warranty info when I checked. I have seen that Neoteck has helped others who have failed. Hopefully, they will do the right thing for me as well.
Headphone amplifier 3.5mm products from Y.d.f. In this article about headphone amplifier 3.5mm you can see why people choose the product. Neoteck and Fosi Audio are also good brands to look for when you are finding headphone amplifier 3.5mm.
Y.d.f, Neoteck and Fosi Audio are some of the best brands that chosen by people for headphone amplifier 3.5mm. Find the detail in this article. Proster Trading Limited, Pyle and Sheiaier are also brands that their products are worth to check.