The headphones amplifier system is used for stage and studio applications. Virtually all types of headphones have the highest sonic quality. Up to six stereo mixes with individual balance controls are provided by 6 independent high-power amplifier sections. Each section can be adjusted for'more me' mixing. You can mix in any instrument or sound source with Stereo Aux input.
👤I needed both budget headphones and a headphone amplifier when I set up a small home recording studio for our band. I like value for money and have a lot of other Behringer gear. The headphone amplifier does what it has to with a minimum of fuss. Documentation and instructions are scarce, but other than that, great value works exactly as expected, and no complaints.
👤I use this with my in ear monitor system and it works great.
👤After a few months, there are no problems with the settings.
👤Lleg en excelente condiciones.
👤This is a great amplifier. The sound is very clean. The price and delivery were great.
👤Muy practico y fcil de instalar.
Six independent high-power headphone amplifier channels. Each channel has its own aux input, individual output level control, and four-segmentLED metering.
👤The description says what it says. I use it in a music room. We feed the speaker amplifier from the speaker amplifier from the speaker amplifier. The other channels are connected to headphones. Two channels are being used for feedback on the guitar. The balance and gain controls are very good. There is plenty of power per channel. Great unit. Highly recommended.
👤This amplifier can output up to six different signals to up to 18 pairs of headphones. Each signal has controls to change what channel is being output, as well as a button that can be turned off. There is a knob that has a dual purpose: without an additional input plugged in, it is left/right balance; with an additional input plugged in, it is balance between the main signal and the aux signal. You have extreme flexibility to cater to different users. Excellent build quality is what it is. There are many small things that show someone thought about this, like the fact that the headphones go to 11. There is a I will use this in my home/project studio and I'm quite satisfied with my purchase.
👤I used my amplifier to record guitars for a local band, because we were crammed in one of the band's members' bedroom and had to keep it quiet, everybody was wired in and listening to the recording as it happened, and you could see the smiles on their faces. This is a must have for me.
👤Great amplifier! We have used other brands of headphones in the past, but this one is our favorite. You won't be disappointed going with this one if you decide between this and behringer.
👤It's perfect for use in the home studio when I want to listen to my singers. Unless your headphones come with a special accessory, you'd want to buy some. versatile on inputs Make sure you get the stereo ones. I love art.
👤The price of the HP amplifier doesn't break the bank. There is a good choice and a lot of expandability.
👤Well built. Sounds good. Does the job.
You need a 3.5MM to If you want to track more than one musician at once, or if everyone in a group wants to listen to a song, you need a monitor distribution system. The compact, flexible PH03 can power up to four pairs of headphones. The upgraded version ofPH06 has a power switch and 3.5 MM headphone output. When a recording session calls for everyone's heads and ears to be in the game, the PH03 is the perfect solution and a real money- saver. The 4 independent stereo high-power amplifier sections in the PH03 maintain the highest sonic quality even at maximum volume levels. The same opamps found in full-size audio equipment are included for outstanding audio performance. The Ultra-Compact Design is a simple solution for studio and stage applications. You can power four of your headphones at the same time with this super-compact amplifier. Let up to 4 people in your studio listen to the main mix while recording, and each of them can choose their own volume level using the dedicated output level controls. Their worry-free 18-month warranty, and friendly customer service are what you get withPH06 Amp.
👤It gives a lot of power to the connections. I wanted to hook up my old 2.1 set with the set I bought for 2.1 but the volume was being sacrificed by the shared connection. I decided to purchase it to see if it helped. There are two sets of 2.1 speakers that have full usage. I'm afraid they will blow as I imagine they will. I connected 2 single 40w speakers along with 4 others as a test and all of them had full volume. The performance of each would be weakened by a direct connection. I'm happy with the performance and it's unbeatable.
👤I have good headphones that have different impedances from 20 to 150 Ohm. There is a Each headphone has its own sound, volume, and special needs because of the external noise. There is a Each person could use a different volume and adjust to their own preferences. There is a My mother is not hearing well. She likes to watch movies or the news with me. She liked it a lot and we have used it. She adjusted the volume to her needs and I did the same, it solved the problem. It's recommended for other purposes as well.
👤I bought this so I could listen to the same music with my friend. All I was looking for was fidelity on the ports. The volume controls are convenient. It's not possible to ask for more given the price. My only suggestion for improvement would be to have the input on the back side and the outputs on the front, which would make cable management easier. I wouldn't call it portable since it requires a wall outlet, but that's not an issue for me.
👤The newer model of ROKU allows listening through headphones, which we replaced with a newer model. It's not designed for multiple headphones, and the remote has to drive them. If you want to watch something on the ROKU with someone else, you need something like this. It allows each listener to set their own volume, which is a real benefit. What can I say about wire management? I'm not saying that it's perfect or that it's an excellent amplifier, but it's really good for the price, and it solved the problem at hand.
👤I am using this to manage audio source feeds to mini-stereos in different locations in my house, it works great sound quality is good, helps compensate for signal loss from multiple extra long cables. I discovered that two of my cables and one old splitter were bad and this helped me single them out.
👤My TV has a very low analog output, so my speakers sounded very low, especially with videos on websites like YouTube. There is a This is what I needed. There is a This is not a turntable amplifier.
👤This works great because I have my music headset, gaming headset, and PC speakers all hooked up. No need for an accessory!
👤The product is well built and has good volume control for two of the four dial options, however, the other two have static at low volume and one knob barely works. I am giving a low rating because I reached out to their customer service two weeks ago to see if I could get a replacement, but have yet to hear back from them.
There is a dual path with both 12AX7 vacuum tube and solid-state gain stages. The combo mic/instrument inputs have class A XMAX mic preamplifiers. Tube drive tube-saturation control. The VU input-level meter is illuminated. The high-pass filter has a -20 dB pad. A small 1/2U rack-mount system.
👤I took this to our first show in Alabama after buying it less than 30 days ago. During my solo with it, it started to cut out. It did it many times before Channel #2 stopped broadcasting. I need to use both channels for my saxophones because I am on the road a lot. I have had a single mic unit for years without any problems, so I ordered a new on of the older models. Waiting for the paperwork from the seller.
👤I wanted to like this product, but the quality control is not up to par. There is a The VU meter lights were different colors when the first unit arrived. It was definitely noticeable but subtle. This is not acceptable for a brand new item. There is a The replacement unit had a fault where the left VU meter wouldn't show a large gain with no input attached. The VU meter behaved as expected. I bought an ART PROMPA II instead of trying again.
👤If you get rid of the crippitycrappity tubes, it will sound like a 5,000 dollar pre-amp. What a steal. The tube change thing is a real bargain, it adds depth, texture and warmth to anything you run through it. Even post-mastering... master tracks... If you work in the digital samples realm, consider using this thing to add realism to your sample pallette. If you put it in to the blue tube, you'll hear a lot of tracks that have been processed. I love this thing.
👤It added a bad hiss. I believe my unit was malfunctioning.
👤Adding the T-12AX7-S vacuum tube to my voice and keyboard warms it up a bit.
👤This unit performs well at the price and is very neat. The 'valve sound' facility adds some warmth to the overall sound when used moderation. The sound and control of the Chinese 12AX7 was much improved after I changed it to the USA Jan Philips 12AT7 VU meters are a nice touch to days gone by, only criticism is the on/off switch. It's a good purchase.
👤I was not able to hear the warmth of the tube. It could be a nice tube overdrive. I tried to change it. Nothing. The sound it produces is the same as if it were turned all the way. I feel like the tube in this is a marketing gimic. There is a I recommend art pro audio products. I had already looked at it. I was able to use it as a line level preamplifier. If you use guitar pedals to line level signals, it will give you a small boost. I thought I would try this again. When you need more gain at mic input levels, you should just hook up a pink noise machine. I can probably build my own better mic preamplifiers with less noise and op-amps. I have! If you're handy, you can get your own OPA2134 op amplifier and the electronics lab. There is a If you don't need it, you can get the Art Pro MPA-II Two Channel Studio Mic Preamp. There is a Don't get this, either way.
The headphones amplifier system is used for stage and studio applications. Virtually all types of headphones have the highest sonic quality. There are 8 independent stereo high-power amplifier sections. Two stereo Main inputs for two independent mixes. Up to 8 individual stereo mixes are provided by 8 independent Direct inputs.
👤The product is great for a good price. I bought this because I thought I would hear the input in the main if I put a direct input in the headphones. That's not the case. The main can only be heard on channels that don't have a direct input.
👤These units are great for budget wired in-ears. I use direct inputs on the back for my mixes. The signal will be unbalanced if you send it from your console/interface. If your equipment has less than 1/2 inch outputs, you could use dualTS to TRS. You can use a cable from the phone's outputs to make a PM1. You could use a standard extension cable, but it probably won't be as robust. I had a power supply fail on one of these units. The HA8000 V1 was the one. The model has been doing well for a year.
👤I use this to drive 7 pre-mix inputs for an In-Ear monitor system and couldn't be happier. The sound quality is great and it delivers enough amplification that we're no longer maxing out volume channels just to barely hear ourselves. If we expand, I can add another one of these channels. I don't know if it will last forever, but it's less expensive than other options and the sound quality is great.
👤I bought this because I needed to be able to turn off my monitors while recording vocal takes, everyone can plug their headphones in and hear the music, and it was very easy to install with my behringer interface.
👤The equipment arrived without proper packaging from the seller and without seals, only with a homemade tape which did not ensure that it was not used. The homemade tape was used for each internal item. When I tested the equipment, the volume knobs did not work well, it sounded good, but sometimes it didn't, and sometimes it did. When I increased the volume of the main output, I heard nothing and it affected my hearing, so I went to the doctor. They have not sent the new equipment yet.
👤When not connected to our snake, electrical interference results in a high pitch hum and 60hz hum in any port. The other cheap headphones are fine. Absolutely terrible. Don't buy. It is too late for me to return.
👤I wanted to combine and send out through multiple headphones and speakers, so I got this. You can only select one input per output using Mono inputs. I would give this 5 stars if I made a dumb mistake.
👤I have changed my opinion on this product. It was the most disgusting piece of equipment I owned. I tried to give the benefit of the doubt to Berhinger by removing the extension adapter from my power conversion. Viola! Problem solved! Very quiet. All mixes are very manageable. There is a This is a good choice if you need something to handle multiple mixes.
👤I bought this because of the headphone knob on my mixer that cuts out at the sweet spot in volume, but realized quickly that it has another great feature: Being able to switch between 2 sources instantly makes comparing a live recording to one that was recorded before super simple. The mono button works well too. The volume control goes loud very quickly, so it's not much to complain about. It would be deafening to have the level at the 12 oclock mark for more than a few minutes.
The 1U Chassis can maximize your rack space. The strain releif is used for the AC adapter. Both bal and unbal inputs. It's suitable for a wide range of headphones. You can join in and join out jacks to expand your channels.
👤Excellent: - Works well. The package was in a great shape and was sent across the world. The sound quality is great. Cheap plastic knobs for volume control are not good. Plugging the power switch to shut it down is necessary. I had to take it apart and get it back in place, it was easy to do.
👤I replaced my headphones in my studio. Just make sure you have 3.5 adapters.
👤Exactly what we needed. Thanks!
There are 4 screaming-loud stereo headphones. Control room monitor control w/ level control and monitor button. Multiple units are daisy chained by using 2 balanced 14” monitor outputs. The 1/3U rack-mount chassis is small. 2 balanced inputs.
👤Sound quality is acceptable for monitoring. I would give this product more stars, but for the fact that one of the two units I purchased came with an incorrect wired input cable, which caused signal loss. The wiring diagram on presonus' website is incorrect. The pin numbering scheme used by the XLR is wrong and the wiring is not correct. I was able to fix the problem myself, luckily one of the cables was wired correctly, and I used a meter to sort out the wiring. The units are working, but beware of the cables. I came up with a solution if you have the same problem.
👤Excellent build quality is what it is. If you want, you can mount this on a mic stand. The sound quality is excellent, with the entry level Shure SE 215-CL in-ear-monitors. This is an inexpensive alternative to get more expensive modules. There is a The included cable should have been longer. I don't see this as something for someone who is moving around a lot, or someone who is standing while playing. If you're standing or moving a lot, you should get a wireless system. If you try to use this with earbuds that are typically included with a cell phone, the power this thing puts out will distort them at low volumes. You need a pair of IEMs with this. Definitely recommended. Good build quality and sound.
👤I use the HP4 for home studio use to allow myself and the performer to monitor with ease, and it's great! I had a MicroAmp. Don't buy that. The power supply is loud and clear. Put that money towards something else. Presonus makes quality stuff at a great price point for those still early in their gear collecting journey. The HP4 looks nice, has a small footprint, sounds good, and does its job perfectly. This thing solved several of my problems, including the stupid HA400 that I had. I need something that will accept L/R input and allow me to run from the Scarlett's monitor outs until I can fix the hardware issue with my Focusrite interface. It's helpful when it comes to tight real estate on the power strip if you have a power adapter along the cord. You actually have access to more outlets if you have fewer bricks on the strip. I highly recommend this item to anyone working on a home studio setup.
👤The unit burned out. It was the 4th day of continuous use. It smelled like burning electronics, and it never worked again. It works much better with the four outputs after that, and should have been bought in the first place. The rating was changed to 1 star because of the failure. I had a cheaper unit that I would take with me to split headphones, but it didn't work well. Decided to spend more on this one. It's solid! It sounds great. It is very clear. It has its own volume/mute with the pass-through on the back. There is an on/off switch with the power supply. I'm going to keep this in my travel commentary pack.
The Premium Analog Circuit is a system for studio and stage applications. The NJM4580 operational amplifier and the high-power stereo amplifier are included in the Headphone Amplifier. Premium design and design delivers low noise floor and high headroom. Ultra-low-NOISE is what it is. The amplifier has a single stereo source and up to 4 pairs of headphones. Enjoy low noise music. There is four independent level control. This headphone amplifier has features such as high fidelity analog circuit, high power output, large dynamic, low distortion sound quality. Each person can control the volume of their headphones when you and your friends share an audio source. Saving energy is possible by using durable material. There are long wear potentiometers and switches. It's convenient to turn on/off the headphones power amplifier with a power switch whenever and wherever you please. There is complete equipment. The included 12V AC adapter is used to power. There is a Stereo Jack Adapter for free.
👤I thought to use this review to answer a question that might be common. The high impedance of the set worried me. The sound is very clean, and I get a nice volume boost. The main reason for this product is that I prefer to use my headphones through this amplifier even when I am not splitting the signal with other users. It's also a nice headphone amplifier. I like the way the inputs are on the back and the outputs are in the front. The knobs have no wobble. The power buttons light up nicely. 5 stars easy.
👤I was hoping for a better response from the $2K monitor controller than I got. There is a The Donner Headphone Amplifier has a degraded response. The two pairs of headphones I used degraded significantly. There is a The unit does amplify. It's built like a tank. This may be what you need if you're not concerned with pro-quality audio response. Despite the naming convention, I would add that it is not a professional.
👤This was what I was looking for. None of the newer ones transmit sound as loud as I wanted, and I own several headphones from over ear to in ear. Yeah. Yes. I am aware of ear damage and hearing loss. A loser. The device let me crank up the volume without adding noise or distortion. I like this thing. 5 stars for what it does and what it doesn't do.
👤It is not often that I post a review after receiving a product, but this is one of the times I think it is safe to do so. I needed the additional volume from the headphone amplifier to use the large screen TV. I was approved for a cochlear implant, but I opted out because I was told I was at risk for the surgery. I watch TV using closed caption. Even though I don't have the ability to hear sound clearly or understand it, the addition of sound enhances the experience. The sound level in my earbuds is too low. The addition of the Donner amplifier allows me to increase the volume on my TV so that I can hear some sound.
👤I like the feel and quality of the knobs, case, ports, and other parts of the build. The included headphones are a poor quality, feeling as if they're mostly plastic despite being solid-brass looking. There is a The audio doesn't seem to have any hissing or buzzing, but the quality is distorted to me. I don't think the audio is clear, the detail has been lost and the frequencies seem to bleed together. It's noticeable in the bass and deeper frequencies. Attempts to compensate for loss of bass and clarity through software was unsuccessful; increasing bass, reducing treble or modifying settings in any way actually make the distortions worse. If you're not into high definition audio or higher bit rate, this might not be a problem, but I think almost anyone could notice the difference. If I knew, I wouldn't buy this again. I would save for a studio ready version.
L/R stereo inputs and outputs. There are 3 headphone outputs per channel. Balanced input on each channel to mix main and aux signal. Mode switches per channel. There are 12 total outputs.
👤I never knew it was possible to dislike a headphone amplifier as much as I dislike this thing. There is a The good news first. It sounds good when it's working. There is a During a session, I discovered that my Headphone 1 mix has a bad channel. The singer could only hear one side of the phone. I switched over to mix 2 to complete the session after about 20 minutes of problems. There was more fun than that. I couldn't get the unit out of the rack. The thing is over the standard 1.75 inches. There are four round head screws that protrude from the bottom of the chassis, which is exactly 1.75 inches. I discovered that I had damaged the piece of gear below when I tried to remove it from the rack. There is a The bad channel popped on after I removed the chassis. Woohoo! I have used a lot of Mackie gear over the years and always liked it because it was always bullet proof. I haven't purchased any of their gear in a while. I fear that things have changed. This was a complete failure and I would like you to look elsewhere. Side note... The reviewer stated that the unit is not stereo because he only hears one side of his headphones. Looks like there are quality control issues.
👤I give this 5 stars because it's very well made with metal parts and everything, but the only thing that's bad is that my headphones are STEREO, so be careful. I can only listen to one side of my headphones.
👤It works great and it's great value. The signal was mono according to some reviews. That's not the case here. It's clear that Mackie wouldn't sell a mono amplifier. Go for it! It works well.
👤I would have liked to give this product a 5 star rating, but I am not able to. I received a bad product. The input jack isn't working right. I only get Mono sound if I push the 1/2 all the way in. I had to tie the two wires together. I threw away the packaging because I didn't want to return it. There is a This is a great product. I would have liked a working unit.
👤I play in a band that does local parties. Our singer wants to hear only keys but during the show he would get loud guitar, so we always had an issue with the speaker monitors. On top looping because of the speakers. We had the best show of the year with this. Many people have said that we bought our own earphones. We could clearly hear everyone, and we could control the level of sounds for each individual. I recommend this for bands that don't want to break their bank to solve what this solved for us.
👤Maybe my expectations were too high for this product. I've always been impressed with the price of Mackie. I've heard a lot of expensive speakers and studio monitors, but I think the Mackie Hr824 are the best I've ever heard. The headphones amplifier sounds terrible. I've tried several pairs of headphones and none of them sound good. The Dt770s sound more treble heavy than normal, lower impedance headphones have a hiss due to the high noise floor, and higher impedance headphones like the HD650 sound like those tinny earbuds they packed with the old ipods. The best sounding headphones I've used with it are from Mackie. These sound decent but don't sound as good as other Amps, including my phone's jack. There is a It's $30 and it will drive every headphone in my collection to a listenable level. It's a great product if you only care about controlling the volume of your headphones, and you want something to do that. It appears to be very durable and well built. It's useful in situations where sound quality isn't a big concern. If you want your headphones to sound good, look elsewhere.
You can create your own personal monitor mix with a 16-channel digital stereo mixer. The operation has 16 preset for custom mixes. Premium audio quality can be achieved with the state-of-the-art 24-bit D/A converters. The buttons have dual LEDs for a perfect overview. There is pan/spread control per channel.
👤If you need to save your ears before it's too late, then take control of what goes into them. If I didn't have to depend on the sound man for my feed, I would go in- ear. A personal mixer is needed. The P16M seemed to be the obvious choice since my band uses a Behringer X18 board. The easiest way to get into the X18 is to set the X18 to send pre or post processed channels to the P16M. For the first time in my life, I can hear myself and everyone else clearly and without fighting the sound man, thanks to a wireless IEM. Still tweaking. I can't imagine going back to the days of a floor monitor and stage volumes.
👤The units I rate 4 stars on value for money are at a premium price point. The complete system is not suitable for budget minded people. The rest of the system was already owned by a band member, so I only needed to purchase this part. It was the least I could do since our band mate had the other three grand already, but this unit is three hundred more than I wanted to spend. We are able to rehearse with headphones, every musician has their own mix, and the sound is crystal clear. We can change the mix for live and keep it in memory. Everyone has their own individual mix of monitors, which allows for lower stage volumes. I don't know how many local musicians are ready for the investment, but I should say that you get what you pay for with this system.
👤I used this for the first time and am in love. I was on the drums trying out the P16M for the first time this weekend and I usually sing and play acoustic with a carvin iem system. If you're an audio engineer, this thing is awesome. There is a I was impressed with the ability to modify everything on each input channel from the limiter to channel gain to overall volume and basic three band EQ, I can't say enough good things about it. There is a You can move the mono inputs across the stereo sound stage in your ears. Can you say heaven? There is a I'm sure I'll learn how to do it correctly after breaking out the manual. The little mixer is a dream come true.
👤It's easy to program and install a great setup. This is where the problem comes in, because it's not too bad of a price. One would expect a good noise to volume ratio from these units at a high cost. They are not quiet. The noise is very noticeable without any audio coming through. It was like a cheap amplifier. I am comparing this setup to the one we have in our band. The Jamhub setup is great, but not a professional system and is hard to rack mount. The Powerplay setup is cheap and noisy. Not happy at all.
The amplifier is used with all types of headphones. 4 high-power stereo amplifier. The sonic quality is the highest it has ever been. Each channel has output level control. The DC 12-Volt adapter was included.
👤The unit is sold with a set of 4 STEREO outputs. The unit I received takes the STEREO input, converts it to mono on one side, and then puts the signal out on one side of the output. I can get rough MONO on both sides of the output, but that is not what it said.
👤I own too many pairs of headphones. I was looking for a way to compare them. I bought this amplifier to use a 4 way splitter to compare headphones. The volume knobs make it easy to match the volume of the headphones. I discovered that this amplifier badly distorts the quality of the headphones after some listening tests. A lay person should be able to hear the problems between this and no amplifier. It ruins the bass response and seems to change the response in a way I can't describe. This is a fine tool. Even for the price, hard skip is a serious listening tool. I have the silver version from Amazon and it seems the same. There is a warning This is just a price that is advertised on Amazon.
👤I was skeptical of this headamp since I bought one that was $100 and it did what it was supposed to do, but I realized it was expensive for what it was. I was unsure about what it was capable of doing. I took the risk and bought it. This is worth $25 It did the same thing as my other $100 did. I saved myself the extra $75 and bought a packet of Cable Matters 3.5mm to 1/2 in adapter. It's not the sleekest headamp you can buy, but it definitely gets the job done. Happy shopping on Amazon!
👤I have a computer with a sound system and headphones attached, but I was wearing out my jacks. It would take a lot of desk space to bring in a mini-mixer from my setup. I saw this thing and knew it was the schnizzle. It arrived today and I am happy to report that it is a good deal for the price. It seems to have a negative effect on the bass, but just doing a small amount of software to boost the bass turned this into a 5 star device. The cables are out of the back and the knobs are high quality. I bought some 3.5mm to 1/4" stereo jacks since my stuff is 3.5mm but a nice 5 pack fixed this since you need 5 to fill all the slots. The unit is large and looks sharp. The metal case makes it look like it is ready to hit the road, but still looks good. The unit has a good weight, and the amplification is modest, with a little distortion after 1/3 throttle, like most mixers. To make my Bose sound louder, I turned my laptop to max and the speakers to half volume. I usually run it at 1.5 to 3. The little mixer is very quiet and there is a small hum when disconnected from the amplifier. There is a If you have two or more audio setup on your computer that you are constantly changing between, you need to get this unit along with the appropriate converters and you will never regret it.
Headphone amplifier rackmount products from Behringer. In this article about headphone amplifier rackmount you can see why people choose the product. Art and Fosi Audio are also good brands to look for when you are finding headphone amplifier rackmount.
Behringer, Art and Fosi Audio are some of the best brands that chosen by people for headphone amplifier rackmount. Find the detail in this article. Presonus, Rolls and Presonus are also brands that their products are worth to check.