The headband cushion is made of knit fabric. Give your headset a new accessory. It should be a brand new look. The dimensions are 9.44 x 3.14 inches and the color is black. The package has a headband cover.
👤I bought one a year ago and loved it. The pros fit perfectly to cover the headband. It was thick and comfortable, with metal snaps. There is a I ordered a new set of headphones a year ago and got some Garrison, the same product, same seller and the same price. The thin material has to be stretched around the headband. The worst part is that they use cheap plastic snaps that are barely stiched into the material. When I tried to unsnap it, a few of the stitches held it in. Prompty going back. The old ones were great. Now? Not much!
👤When I first tried it, I could tell what everyone was talking about, as the Monolith M1060C is notorious for terrible comfort. They were stretched to their last extension setting because I have a big head. Adding the Geekria headband cover didn't make a noticeable difference to the terrible comfort, as the hotspot pressure at the top of my head was still very prevalent. There is a I figured I would try it on my HE-4XX, as those are well known for being bad for comfort, but I was disappointed. The earcups would not cover my ears with the headband cover on. I noticed a slight cushion on the top of my head when I tried it on, but it wasn't a fault of Geekria, I would have been more comfortable if I had been able to experience it for myself. I returned them because they don't improve my M1060C and make it impossible for me to use my HE-4XX. I might have kept them if my HE-4XX had a bigger headband. It doesn't help if the headband hits a single point on your head, but it can help if most of the headband makes contact with your head.
👤The headband is starting to lose its shine. The thin band causes a bit of pain after a long time. There is a The headband came to the rescue. The headband stretches easily and the fabric feels good on the hand. I don't feel pain in my headphones anymore. It's working wonders for $9.
👤I have never heard of something like this. When I picked up the headband, it left a small black speck on my fingers. I found this and wanted to use it to paint it. There is a The fabric on the headband is thick, so it stretched at the button points. The headband needed more fabric for its size. It wasn't long enough to expose the plastic ends. There is a But that is fine! It doesn't move or shift. There is a Overall, a great help and a great product.
👤Hair product and headphones are not good. I don't need math to know that I can put this on my headphones and not worry about damaging the leather or velvet that makes my hair stay smooth. The band was toast if that happened to a pair of workhorse Denons. I haven't thrown these into the wash yet, but they are long enough to deal with some shrink if that were to happen. If you're pushing the limits of how far yours can extend, you might find the fit less than ideal. I'm sure this would be great for people who are dissatisfied with the padding in their current headphones, though it's a bit dense and hasn't the give of most padding.
Protect the headband to prevent damage and scratches, and make the headband more comfortable by improving the comfort of wearing a headphones. The headband is made of high-quality wool yarn, soft knit, and comfortable. Most of the mid-sized headphones are compatible with the headband cover. Product dimensions are 9.44 x 3.14 inches and color is pink. The package has a headband and headphones.
👤The headset makes my setup look more like it belongs at it. I was concerned that my long hair would get caught in the clasps, but it didn't. There is a There are pros and cons. The gaps in the photo make it hard for my headset to be an inch wider. The sellers picture is nearly as bright as the pink one. I like the color because it matches my stuff better than I expected, but I could see someone wanting to know the actual color. To cross reference color, check my photo. The product photo shows a baby pink, but I would call it a light "millennial pink" instead.
👤These were bought to match the pink earphone covers. It is a cardigan sweater for headphones. I might enjoy it more in the winter. I doubt it. My new headphones are transformed into a Walmart special discount offer. Don't buy this if you like good design. A paper bag over your head would make you look better.
👤My daughter bought this set for her school computer. She didn't want to replace Them because she liked them so much, but the outer layer had begun to peel off. Yuck. We put these on the top headband and the earpieces and they were just like new. She likes them because they are soft and cute. There are no more problems. Fantastic!
👤This looks great with my headphones. It fits around the headband. I think it's a good idea.
👤It is so cute. It's easy to install. Yiu can wash it. You won't feel it.
👤It protects my headphones when I work out.
👤While they fit, they are stretched to fit, I bought this for my hyperx cloud 2s. This is a good headset for thinner headbands. This is a great product for a headband that is already worn out.
A replacement headband is made with knit fabric. Give your headset a new accessory. It should be a brand new look. Product dimensions are 8.86 x 2.95 inches and color is black. The package has a headband cover.
👤A headband cover is essential for protecting any leather headband because it is not durable and will inevitably start peeling off after a few months. Some headbands are made of leather, which is durable, but any non-black leather will show signs of staining from hair oils. I've bought two of these so far for my headphones and they do what they're supposed to do for a good price. I'm satisfied because it works, but it doesn't scream quality. This bunching effect at periodic stops along the underside of the band is a little unattractive because of how the fabric is cut and the way it wraps around the headband. It's not a big deal because you don't feel it. Again, it does what it's supposed to do. I don't know if they hold up from washing. Hand washing or using a garment bag in the washer is probably the safest way to wash an item. I had to exchange one of the purchases because it didn't work right.
👤I used the sweater headband cover to attach my headphones. This is a good choice if you are looking for a headband cover. The fit of my headphones was perfect. It held up in the first wash. I thought the sweater could add padding to help with the fit of my headphones because my head is too small for them to fit comfortably. The cover is not thick enough to give me theumph that I was looking for. It is made from very thin material.
👤I went for the knit fabric because I wanted more cushion for my headband. The fabric is very thin and didn't really add any additional comfort, as well as creating a bigger hotspot on the top of my head. If you want to distribute weight a bit better, this won't be the solution.
👤It's Grey and not black, but as soon as I put it together it was unzipped from the bottom.
👤It adds width to the Sony xm4000 headset band, while better balancing weight and adding cushion. Cool knit in black and grey.
👤I put this over my deteriorated pad. It looks good and feels good.
👤These are on a few pairs. It's nice but still subtle. I use them to protect the headband. They don't give a lot of cushion, but they feel good.
👤It was purchased to cover my hearing protection strap. It is a good fit and comfortable to wear.
👤Para unos Sony xm3 tienen demasiado largos. Ademas de vinieron, uno tenia unas medidas, y uno de ellos mal cosido. tambien empezo a verse algun hilo mas. A largo plazo is a priori.
👤Producto, tal, lleg mucho antes del tiempo.
The package has a headband cover. The headband pads are made of knit fabric. Give your headset a new accessory. It should be a brand new look. This headband is compatible with many brands. Product dimensions are 9.96 x 3.74 inches (25.3 x 9.5 cm). The package has a headband cover.
👤I bought these for my headphones. The large size fits perfectly with the Clears and the gray color goes well with them. It's a great way to protect the headband. This is a line of headphones.
👤The buttons are sewn on meaning, if you apply one time, you can rip the buttons off the material. You have to be careful with how you pull apart the fabric. I sewed the buttons on more securely and am okay now. There is a This won't replace foam in the sense of comfort. This thin layer of fabric can be used to protect the original headband or to mask it from fading. Can only recommend if you want to hide your original headband.
👤I finally found a headband cover that fits the Focal Elegia and the Focal Elex. I ordered a couple of bands that said they were big enough. They were not. This one works well.
👤It made my headphones a bit more soft. The hard leather headband on the Momentum was too uncomfortable for me. I bought a headband cushion pad that wasn't intended for the Momentum's split style headband. I attached the headband cover to the cushion pad. It worked well. I ordered a second one to go onto my Game One PC headphones, which were already pretty comfortable. I didn't want to risk wearing out the snaps on my two headphones by changing them back and forth between my two headphones, and the knitted headband cover adds even more comfort. I wish they would come in a few more colors, because my headphones are brown and they don't have any great choices for brown headphones, but the grey looked great on my white Game One headphones.
👤It was a great color for my clear. There is a The material is very thin, and there is a lot of puckering between the buttons. It doesn't look like it does in the picture. There is a It still protects the headband as expected.
👤I am happy to report that it fits perfectly and the color matches perfectly, I purchased this specifically for my Focal Clear.
👤I used this for my headset. Adding some minor padding to an old padding was useful in protecting my head from getting hair pulled.
👤The large is too big for my ATH-M50. I wrapped the ends twice to make sure it was in position for my set of headphones which sit at home all day. It's important to get the perfect fit if you pack your headphones away all the time.
👤I ordered another for my Elegia.
👤It's pretty useless. An old socks could do the job after 2 weeks of travel from Hong Kong. It doesn't fit my Audio TechnicaMSR7's.
👤Ich bin per Zufall, bei der Suche. The war is "so Ein Bldsinn... ". The Produktbewertungen lasen. Im sechsten Tue hat das Wollpolster, das sechsten sechsten Tue, das sechsten sechsten Tue. In den Einkaufswagen ist Weg. There is a Freude ist die Qualitt der Wolle. Sehr weiche. Kleiner Kritikpunkt ist die Druckknpfe. Da das Polster gerade gestrickt ist ffnet. Dieser Nachteil ist jedoch. Bequem ist das Ding! The name of the game is KUSCHELKOP FHRER!
The package has a headband cover. It's quite comparable. Most big-sized headphones are compatible with the GEVO Headphone Headband Cover. HyperX-(Cloud 2/Cloud Alpha/Cloud II Wireless/Cloud Core/Cloud ALPHAS) The Shure-(SRH450/SRH450DJ/750DJ/) Corsair-(HS50/HS60/HS70),Logitech-(G PRO X),Corsair Gaming H2100 headset are listed. A very flexible headband cushion can be easily installed. Allow you to reuse. Quality materials and design, made of high-quality Knitted Fabric, improved and effectively protect your earphones from scratches. This is a note. Earphones with a narrow headband are not recommended because they will be loose after installation. The pack contains 1 x Headphone headband cover and 2 x Alcohol pad. The protectors cushion pad is 10x 4.3 inches. The headband cover can wrap the headphones.
👤Even if it is thin, the headphone cover is made of nice material. When I tilt my head, this material keeps my headphones from sliding. It makes them easier to wear while I clean the house. Two years ago, I bought a cover on Amazon that moved my headphones all over and made them fall off. There is a This is the longest cover I've found. I can't find anything anymore. The seller will sell a cover that protects the joints where earphones twist. When I lay down to watch tv, those dig into my head.
👤It seems that high quality materials and high quality execution are very durable, but only time can tell. It is almost good enough for the Focal Clear but not quite there, but it is the closest that I could find. Highly recommended.
👤The leather of my headphones was peeling off. The cover keeps my head clean. It's in place. It doesn't conform to the headband exactly and sticks out a little, but it would give 5 stars.
👤Works well with PSB. M4U 1. I had to stretch it a bit but it was not unreasonable. Will probably buy another one.
👤The length was shorter than expected.
The headband pads are made of knit fabric. Give your headset a new accessory. It should be a brand new look. The product is 8.25 x 3.62 inches. The package has a headband cover.
👤This is a cover for my headphones. It fits well. It's definitely small for me. The cloth is soft enough to hold everything in place. I replaced the headband pad on my sennheiser and am using this to hold the new headband in place while the glue is set. I can use this to keep the headband padding on if the glue never sets. I think it's a good investment, but I wish they made the bigger ones easier to get.
👤I didn't need to replace my headband. It wasn't dirty. Wrap is the better way to replace the headband. I bought a headband to keep it from getting dirty. This came quickly, is good quality, and snaps on easily. I brought it to a family gathering and received some nice comments. I like this. I wish it came in more colors, but the grey cover matches my Bose QC quite well.
👤I love it! I added this headband to my headphones to make them more comfortable. I recommend this headband to anyone who is looking for increased headphones comfort while also adding a unique style to a drab set of cans.
👤It works on my Bose. The snaps on mine were plastic and I like them because they are clear. The problem of my worn head strap has been solved. It makes it harder to put the headphones in the case. If that happens, I plan on stitching it together.
👤The material is nice. Looks nice. If I need to, I can throw this in the washing machine. There is a I bought one to put on my headphones, but they barely fit around the headband. I tried them out with a pair of headphones that I consider quirky, but I can't snap the cover together. More material would solve this. There is a The bumps aren't a concern because these provide just enough padding for the headband. I'm going to take two of these together and see how they fit together. I was not happy that I could only get these on the headbands. I like them. Update 1/23/15. I snapped the two together after purchasing a second headband. I'll probably buy a few more to put on my pair. The manufacturer should look into two sizes of headband, one small and one large, where the small is the size currently provided, and the large has more material to stretch over the headband.
👤I don't understand the 5 stars reviews because it did nothing to improve the comfort of my headphones. It is smaller and thinner than I thought, and the whole product description does not provide any comfort. The material is not as thick as I expected, but it seems well made and I am giving it 2 stars instead of one. I am not saying that this is a bad product, but it did nothing for me.
👤It was more comfortable for me to have the buttons on the top of the headband than it was to have the buttons underneath the headband. I had good value for the money, comfortable, and easy to add to my headphones.
The headband pads are made of knit fabric. Give your headset a new accessory. It should be a brand new look. This headband is compatible with many brands. Product dimensions are 28.6 x 11 cm and is black. The package has a headband cover.
👤Are you bald? Does the headband of your headphones leave a mark that looks like someone tried to cut your head off? There is a This is what you need. No more marks, no more pain, just easy listening... When I ordered this, I was not expecting much. I was struggling to wear my k7xx for more than 30 minutes at a time. There is a I was unimpressed when I first unboxed this, it was soft but thin and didn't inspire confidence. I put it on the headset snap by snap and immediately thought it was large, it puffed up at the top, and it reminded me of those beanie hats that were popular for a while. I put it on. I have been wearing them for 4 hours now and they feel better on my head. I would have thought impossible last week. If you have a bald head, this is a long story.
👤There is a problem with companies on Amazon using the same store page for completely different products, which is an annoyance. Geekria made knit headband covers. They were very good. They switched to plastic snaps after that. They were garbage. There is a new version with a different knit, a larger size, and grey snaps. Most reviews on this page are not for this version. I don't know if it came out around 2020 or not. There is a I'll take an image from the current store page at the time of this review so you know what I'm talking about. I'm including an image of the "OG" geekria with metal snaps against the new one. End There isn't much to say about it, it's a knit rectangle with snaps to protect and breath new life into headphones. I use the same products on my headphones every time, because I've had headbands that were rude to me in the past. That is stopped by these products. They absorb the oils from the headband. I can't run my headphones through the washing machine, but these knit covers can. There is a The new version is stretchy and high quality. It is very long and would not fit on my HD58x's without heavily bunching up on the ends. They're perfect for my new HE400se's. There is a I would like to see the addition of four more snaps, one in between each of the existing ones, to distribute the force of the stretch more evenly. There is a small amount of fabric on the ends of the snaps when they're installed on my HE 400se's. It's aesthetically annoying, but functionally it means nothing.
👤It is wide enough to fit the headband that came with my headset, but it needs to stretch a little. Stretching makes the cushioning even thinner. With. It did not make my headset more comfortable for me, but I can see how it might be enough for someone who is bald and doesn't want hard leather resting on their head. I couldn't put enough in there to make it worth it because the space on the AKG 7XX line of headphones will be very limited due to the right fit. This could work well for other headphones, so I will give it some credit. There is a The push buttons snap together well and will not be difficult to pry apart. That should not be a problem if you don't try to pull on the knitted material and expect the buttons to come apart. Someone said that this was a negative and that they ripped up the knitting. The only way to un-snap the push buttons was to use fingernails.
The thicker knitted fabric is hand-washable and can keep your head warm. The product can prevent dust by using a magnetic unit and prolong the life of the headset unit. Bose, SoundTrue, SoundLink, around- ear headphones, and B Studio are compatible with many headphones. Product dimensions are 8.85 x 3.14 inches. Red. The package has a warmers headband cover.
👤It's easy to apply on headphones. The area where my headphones broke was covered.
👤Aumenta lo spessore dell'archetto, favorendo il comfort, ma purtroppo la tonalit del rosso. pi sul corallo.
👤The fake leather is peeling off as it is being used for Hyperx Cloud 2. This is very comfortable.
Protect the headband to prevent damage and scratches, and make the headband more comfortable by improving the comfort of wearing a headphones. The headband is made of high-quality wool yarn, soft knit, and comfortable. Bose QuietComfort35 II, QuietComfort 25, B Studio Wireless, Studio3, Studio2.0, Studio1.0, Sony WH 1000XM4, WH 1000XM3, WH 1000XM2, and WHXB900N headphones are all included in the Universal Headband cover. Product dimensions are 23 x 8 cm. The package has a headband cover.
No tool is needed for easy installation. It fits over the original headband. Don't remove the headband. Can be used to protect your headband. Extra pads are used to improve the wearing comfort. Product dimensions are 8.85 x 3.14 inches and the color is black. The package has a headband cover.
👤I like the feel of the Airpods Max headband on my head. I don't like the look. I wanted something that would keep the comfortable feel while improving the look. I am happy I found these. These execute on what I was looking for. The ends look better than they do without, even though I wish they were tighter. The headband was designed for comfort and they cover the god awful look. It is of good quality. Definitely recommended.
👤It's a good idea to use a headband made of leather or other materials that are prone to be affected by elements.
👤It is a great purchase.
👤The headband cover I bought made the headphones feel heavier. I wanted a cover to protect the headband that the AirPods max comes with because it does a good job of distributing the weight in a comfortable way. The sleeve is more comfortable than the headband on its own, but that is understandable and worth it. If it was in white or gray, it would be better.
👤The company seems to be the main accessory maker for airpods. I was wondering if I was over protecting the airpods Max when I got this item. It's on my computer and I love it. It looks like a home knitted cover. Enjoy.
👤Cet accessoire est adaptée. Le Tissus est amovible, facilement, and pas possible de retirer. Le nettoyer est un opération de licate et risquée. There is a De soucis, plus ce Tissus tricoté. Is it correctement l'arceau? I ne bouge pas. Ce n'est pas ce qui compte le plus.
Headphone band cover knit products from Geekria. In this article about headphone band cover knit you can see why people choose the product. Geekria and Brook + Bay are also good brands to look for when you are finding headphone band cover knit.
Geekria, Geekria and Brook + Bay are some of the best brands that chosen by people for headphone band cover knit. Find the detail in this article. Geekria, Geekria and G Gvoears are also brands that their products are worth to check.