Best Headphone Band Cover Sony

Cover 26 May 2022 10+ Comments Open

1. Linkidea Compatible Headphones Replacement Installation

Linkidea Compatible Headphones Replacement Installation

There was no tool needed. Don't remove the headband. Can be used to protect your headband. The headband cover is compatible with Sony. The dimensions are 7.6" x 4.3" The package has a headband cover.

Brand: Linkidea

👤The headband cover was purchased based on the dimensions stated in the listing. There is a The width of the item I receive is 3.75 inches in the middle and 3 inches on each end. No, where near the stated width at any point. It wouldn't fit on my headphones. The dimensions are close to 7.6 inches as stated in the listing. Hope this information is useful to others. I will have to return it.

👤I bought this after my headband started peeling. It was packaged in a small sealed plastic bag. It was cut perfectly and went on without a hitch. It fits over the old headband and stops where the joints begin. It fits well and doesn't slide around. I think it could have been made more snug so it wouldn't bunch up. The silhouette of the headphones is broken a bit by the bunch up along the zipper. The material feels like plastic and the zipper feels like plastic. The only complaint is how simple of a solution it is and how comfortable it is.

👤I use the Senal SMH-1000 headphones in my sound bag. I replaced the earpads for the sake of comfort, but the original headband was beginning to break. I thought I'd give the SMH-1000 a try. There is a The headband protectors went on like gloves. It was a little bunchy at first, but after tugging it into place and centering it, it fit perfectly. It's nice and comfortable and I don't have to worry about my headband coming off. I'm happy.

👤It works on a pair of audio technica m50s. It has decent comfort. I put a piece of foam under the headband to protect it. It made the headphones more comfortable to wear.

👤I put this on my headphones. I have a small head, and the headphones slid around too much for me. I put a couple layers of packing foam on the bottom side of the headband after purchasing this cover. It had a perfect fit after being clipped onto the headphones. If this hadn't worked, I would have returned the headphones.

👤The headband on my MDR-7506's was starting to wear and this was the perfect protection for it. I don't feel it when I wear the headphones and they are easier to pull off. It feels like it will last a while, the fit is perfect.

👤The headband on my headphones was no longer in working order. I think it's supposed to have a loop to hold the pull, but I didn't have one. It stays put on its own. It was made in China.

👤The solution for a flaming head band is nice, but it can be difficult to open with a bit of tension. There is a It is soft and comfortable once it is in place.

👤The band is moving quickly. It is not well designed for a circular shaped band and there are bumps that affect how the band sits on the head.

2. Headband JARMOR Replacement Protector Installation

Headband JARMOR Replacement Protector Installation

It is comparable. This headband is compatible with Sony headphones only. Not compatible with other Sony series. Easy installation. It's easy to install and use. Protect your headphones from dirt and sweat. The high quality material is made of soft neoprene. The replacement headband has a smooth surface. Each head band is thoroughly inspected for defects. Money back guarantee for 180 days.

Brand: Jarmor

👤My v-moda crossfades are perfect. It is easy to install.

👤A great cover for headphones. Looking for a bigger size to fit the headphones.

3. Krone Kalpasmos Compatible MDR 100ABN Replacement

Krone Kalpasmos Compatible MDR 100ABN Replacement

There is a headband x 1 in the package. The ear cushions are compatible with the Sony WH-H900N H. ear. On 2 and MDR-100ABN headphones. The same as the Sony WH-H900N stock ear pads, but also in inner memory foam. It is comfortable and helps cancelling noise. The original ear pads for Sony are here. Superior leather is crack-resistant and comfortable to wear. High-density memory foam blocks noise. For a long time. It's easy to install and it's seamless tight. The leather bag is portable and also protects. The ear pads can be kept away from being wet. The life of headphones can be extended with new cushions. If their ear pads don't fit your headphones, you'll get 100% money back. If you have a question about this product, please contact them.

Brand: Krone Kalpasmos

👤I don't understand why some reviewers think the foam is harder than it really is, or that it's cheaper than it really is. It looks and feels the same as the originals did. The originals are softer now because yellow foam has been leaking. I have to put the rings back in. There is a After only a year of use, the binding on the outer surface of the cups began to break, and it got worse over time. I think the cups are cheap and poor quality. If the glue lasts more than a year, it will beat the originals, but I will not say so. I was searching for the headset on Amazon, but I found it, and it had a better sound balance than I'm usually able to find. I was thrilled to spend $20 on replacement cups instead of $150 because I didn't know the earcups were replaceable. There is an update. Some feedback with these, that I didn't get with the original foam, is what I now experience. Either this material fails to make the ambient mic out of the speakers, or it actually directs more sound between them. The solution is to disabling noise cancelling, which suits me, but will be a problem for people who rely on that feature. I haven't heard a high-pitched whine, but the sounds coming from the headphones will sometimes ring with feedback. Sometimes the feedback is there, but others it isn't and I don't. The cups are very happy with this Docking a star for this

👤This is an aftermarket ear pad for the Sony WH-h900N series headphones. The single part is listed for $54.95 on the encompass Sony website. The two ear pads for around $20.00 are a nice low cost option. The color is the same. The feel of the faux leather is a bit less soft than the original, but it is possible that the Krone will be more comfortable with more use. All in all, I can not complain. I would prefer to stick with the original parts, but they are a no-brainer.

👤These are replacements for the original ear pads. I can't speak for any other brands of replacements, but these seem to be good quality. Better quality than the original. There is a They come with instructions on how to remove the old ear pads and how to install them. They fit the headphones just as well as the originals. When you remove the old ones, you might want to have a brush or vacuum at the ready. It's gross once you remove the originals. Dust, hair, dead skin, etc. Before you put the new ones on, you should brush it out.

👤When I ordered these ear pads for my headphones, I was expecting them to be the same as the original ones. The ear pads are not as good as the originals. The ear pads are slightly smaller in diameter than the originals, meaning there is less space for your ears. I noticed it right away. I was able to get used to it after wearing them for a few minutes but they are not as comfortable as the original ear pads. The leather and foam on the ear pads are not as soft as the originals, and it's possible that my original ear pads have broken in and gotten softer over the course of three years I've had them. The originals are close enough that they don't look out of place on my headphones. Installation was easy because of the excellent design of the headphones. These are adequate but not much more. I think they're the best option available on Amazon, but the other options seem to be of lesser quality. If you're looking for replacement ear pads for your headphones, these will work. You're not getting quality.

4. Headphone Sennheiser Audio Technica Replacement Protector

Headphone Sennheiser Audio Technica Replacement Protector

The headband pads are made of knit fabric. Give your headset a new accessory. It should be a brand new look. The product is 8.25 x 3.62 inches. The package has a headband cover.

Brand: Geekria

👤This is a cover for my headphones. It fits well. It's definitely small for me. The cloth is soft enough to hold everything in place. I replaced the headband pad on my sennheiser and am using this to hold the new headband in place while the glue is set. I can use this to keep the headband padding on if the glue never sets. I think it's a good investment, but I wish they made the bigger ones easier to get.

👤I didn't need to replace my headband. It wasn't dirty. Wrap is the better way to replace the headband. I bought a headband to keep it from getting dirty. This came quickly, is good quality, and snaps on easily. I brought it to a family gathering and received some nice comments. I like this. I wish it came in more colors, but the grey cover matches my Bose QC quite well.

👤I love it! I added this headband to my headphones to make them more comfortable. I recommend this headband to anyone who is looking for increased headphones comfort while also adding a unique style to a drab set of cans.

👤It works on my Bose. The snaps on mine were plastic and I like them because they are clear. The problem of my worn head strap has been solved. It makes it harder to put the headphones in the case. If that happens, I plan on stitching it together.

👤The material is nice. Looks nice. If I need to, I can throw this in the washing machine. There is a I bought one to put on my headphones, but they barely fit around the headband. I tried them out with a pair of headphones that I consider quirky, but I can't snap the cover together. More material would solve this. There is a The bumps aren't a concern because these provide just enough padding for the headband. I'm going to take two of these together and see how they fit together. I was not happy that I could only get these on the headbands. I like them. Update 1/23/15. I snapped the two together after purchasing a second headband. I'll probably buy a few more to put on my pair. The manufacturer should look into two sizes of headband, one small and one large, where the small is the size currently provided, and the large has more material to stretch over the headband.

👤I don't understand the 5 stars reviews because it did nothing to improve the comfort of my headphones. It is smaller and thinner than I thought, and the whole product description does not provide any comfort. The material is not as thick as I expected, but it seems well made and I am giving it 2 stars instead of one. I am not saying that this is a bad product, but it did nothing for me.

👤It was more comfortable for me to have the buttons on the top of the headband than it was to have the buttons underneath the headband. I had good value for the money, comfortable, and easy to add to my headphones.

5. Audio Techníca Sennheíser Sküllcandy Replacement Protectors

Audio Techn%C3%ADca Sennhe%C3%ADser Sk%C3%BCllcandy Replacement Protectors

Protect the headband to prevent damage and scratches, and make the headband more comfortable by improving the comfort of wearing a headphones. The headband is made of high-quality wool yarn, soft knit, and comfortable. Bose QuietComfort35 II, QuietComfort 25, B Studio Wireless, Studio3, Studio2.0, Studio1.0, Sony WH 1000XM4, WH 1000XM3, WH 1000XM2, and WHXB900N headphones are all included in the Universal Headband cover. Product dimensions are 23 x 8 cm. The package has a headband cover.

Brand: Geekria

6. Compatible Audio Technica Sennheiser Skullcandy Replacement

Compatible Audio Technica Sennheiser Skullcandy Replacement

Protect the headband to prevent damage and scratches, and make the headband more comfortable by improving the comfort of wearing a headphones. The headband is made of high-quality wool yarn, soft knit, and comfortable. Most of the mid-sized headphones are compatible with the headband cover. Product dimensions are 9.15 x 3.14 inches and Pop Blue. The package has a headphone headband.

Brand: Geekria

👤The headband cover is small enough to fit on my headset. I bought the cover to add padding and volume to my ears because the cups push on the top of my head, which is smaller than a man's. I can't add padding between the headband and the cover because it's already at its limit, because this fits so tightly. I give it three tries because it seems well made and cute. I would recommend it if you want it for decoration. I would look for something bigger and wider if I needed it for comfort.

👤It is easy to use and does the job. It fits my ear. Bose headphones are perfect.

7. Geekria Compatible MDR CD900ST Replacement Installation

Geekria Compatible MDR CD900ST Replacement Installation

There was no tool needed. Zip up in place if you want to fit over the original headband. Don't remove the headband. Can be used to protect your headband. The dimensions are 7.8 x 4.3 inches and the color is black. The package has a headband cover.

Brand: Geekria

👤The Geekria hand band cover is easy to install and allowed me to get more time out of my headphones. The cover made the headphones slippery on my head. When the headphones are in use, you get a wavy look when the zipper is "scrunched", which is a downside. If you can overlook those two drawbacks, the product is a good one.

👤The headphones that I have ever used are the MDR-V600. The pads over the earphones wear out over time when the ear pads start to break down. The ear pads can be replaced at a reasonable cost. Replacing the Sony headband cushion is very time consuming and requires a solder iron. Geekria has a simple solution - cover the disintegrating cushion with a padded cover. My wife put it on in less than a minute, because it was so easy to install. This is more comfortable than the original cover, and it eliminates the risk of damage. Highly recommended.

👤Geekria doesn't have a product for the Audeze. I looked at the dimensions and decided to try it. I was able to add some foam between the product and the headband to provide some much needed cushion for these heavy headphones. It's not a perfect fit at the ends, but it doesn't move once put on. There is a If Geekria offered strips of memory foam to use with their covers, it would help those of us who seek more cushion for our headphones.

👤It is easy to install and feels like it will last at least a couple of years of moderate use. There is a It would be perfect for the Sony MDR-7506 if it was about 1/2 longer. It leaves a small amount of headband on each side. I don't want to see my original headband. I see from other reviewers that it fits other brands and models perfectly.

👤The product name isn't listed, but I decided to buy one of these for my Sony MDR-CD999 as the underside of its headband is peeling. There is a The CD999's headband is roughly the same width as those in the V600 family, but is a bit shorter. I was able to make it work after a small struggle, but the cover is longer than the headband. The cover is very comfortable and I am happy with it.

👤I have a 30-year old pair of high-quality headphones from Sony that I needed to replace about 10 years ago after they began disintegrating and leaving a small amount of pleather on my ears. I didn't know that the headband was going to leave a mark on my bald head. I found this headband cover through an online musician forum. The problem has been solved. It is easy to wash. I like when products do what you need them to do at a fair price.

👤The headband was the first thing. The material in my hair and face was caused by my Sony headphones. The ear cups were replaced a few months ago. The headband started to fall off. This thing is easy to install. Wrap one end around the headband with the zip up the other, then line up the zip and zip it up. It's easy. There is a No more small black particles. I can continue to listen to my headphones.

8. Replacement Sennheiser MDR HW700 Headphones Installation

Replacement Sennheiser MDR HW700 Headphones Installation

There was no tool needed. Zip up in place if you want to fit over the original headband. Don't remove the headband. Can be used to protect your headband. Product dimensions are 7.87 x 2.95 inches (20 x 7.5 cm). There is a headband x 1 in the package.

Brand: Geekria

👤I contacted Geekria's customer service and they were able to help me find a headband cover. I'm very happy with the product. I bought these to protect the headband and to prevent the leatherette material from cracking on my headset. There is a They don't take away from the original aesthetic.

👤The headband cover on my PXC550 is not good. It works great and fits snug, so I wish I had bought it earlier.

👤se ajusta a la perfeccin.

👤The Sony 700DS ist besondere. Geduld, Gewalt, and the rest gings aber. Htte breiter. Dazu ist die Innenseite, die beim Falten fast verschwinden. Tgt. The beste Methode falls. In feine Krmel beginnt, wie bei mir das Originalpolster. There is a Zu empfehlen.

👤He pedido para unos auriculares. Se acopla perfect. Un compra.

👤This is a generic fit that is bulky and has a wrinkling on the curves of the headband. It's uncomfortable and unattractive, even though it does cover the headband. I discarded it because I wanted to put it up with the original.

👤La qualité du Tissus est trs bonne et trs agréable. There is a Le seul petit reproche est un manque 2 3mm de tissus. There is a Mais pour le reste. en terme d'apparence

👤Soddisfacente, facile.

9. Replacement Headphone Audio Technica Panasonice Installation

Replacement Headphone Audio Technica Panasonice Installation

The package includes a headband. Most of the big-sized headphones are compatible. Quality materials and design, made of high-quality knitted fabric. Improve the comfort of headphones. It is easy to install a headband without tools. It can be washed by hand or machine. The headband cover for the headset can wrap the headphones beam. The package contents are listed. A headband cushion. The alcohol pad is x2.

Brand: G Gvoears

👤The Corsair Gaming H2100 headset still works great, but over the years the leather covering on the headband had started to chip, so I didn't want to use them anymore. I was covered in black particles when I put them on. I ordered this to fix the problem, and it did. I took a toothbrush to the original headband and used a cover to cover everything. It was a tight fit, but works well. It looks good, but it's not as comfortable on the top of my head as the original headband is, but it's not bad. I'm no longer covered in black.

👤The cushion on my headset is terrible. This is more of a covering than a cushion. This will hide the scratches or cracks on your headset.

👤I was looking for a quick and easy solution to repair my Audio Technica A50s, and this truly delivered for something that does not require sewing. There is a The material is stretchy and easy to install. The headband cover was cut to length and tucked under the edge clips for a clean look, but I did not do it myself. The color of the clasps is something I don't like. The cover still looks good, even though I wish they were black. I like cloth over leather because it's easy to clean. The cloth ear cups I got have given my headphones a new lease on life. If I decide to add padding to my headphones headband, I might buy this cover again. There is a This is a quality product that you will not regret buying.

👤This thing is a simple cover over the headband. If it fit well, there are bumps on it where the fabric isn't sitting right, and it's digging into my head. It's making my head hurt after about a month of use.

👤The headband cover is easy to use. The headband overhangs the end of the plastic headband and is too long for M50, so it's the main challenge. It's not noticeable when I wear the headphones. It might be a deal breaker if you are a visual perfectionist. They have been great. It's difficult to make a product work.

👤This adds no cushion at all. I have dish rags in my kitchen sink that would provide more padding. It's a cosmetic upgrade. I own an Audio Technica -M50x. The product has to be stretched so much to get around the headband that it's not as thick as it appears in the pictures. I can't even add my own padding to the stock headband because it gets compressed into a solid mass and is just as bad as the super tight stretching. It's disappointing. I can't recommend this product because it's currently advertised.

👤I tried the package for a full day. Installation is easy. I will have to see for myself if the material is elastic and hard enough to hold for a long time. If my impression changes in the future, I will update. My suggestion to the seller is to make the whole cover 2 cm longer so that it covers more of the headphones. If the buttons are inside, it will be more elegant. I am a pro- user. I'll be happy to purchase more and recommend it to my colleagues if these suggestions are actually done. There is a I highly recommend it for most AudioTechnica headphones. I have never tried it on another, so I don't know.

10. Replacement MDR XB950BT MDR XB950N1 MDR XB950B1 MDR XB950AP

Replacement MDR XB950BT MDR XB950N1 MDR XB950B1 MDR XB950AP

The headband pads are made of leather. Give your headset a new accessory. It should be a brand new look. The headband is compatible with the headphones. Product dimensions are 5.1 x 1.3 inches (13 x 3.3 cm). The package contains a replacement headband.

Brand: Geekria

👤It is not possible to install as the original one. It's not possible to cover the wire.

👤It was easy to install and did what it was supposed to do.

👤I got a pretty decent deal on a Gioteck wireless headset, but it had a large sponge headband pad that was stuck on with double sided tape. I put it on after pulling it off. It's been comfortable for a while now. Highly recommended.

👤The plastic inserts of the headphones should be secured with a band.

👤Do not fit Sony. It is not very long. Not enough is enough.

👤I will be keeping a spare for them since it does not fit my MDR_XB950BT.

👤tuttavia manca tutto il resto. There is a Le dimensions non rispecchiano quelle della cuffie MDR-XB950. There is a In mancanza di altri competitori, sono comunque costretto a rimanere. Non compratelo se cercate un rimpiazzo. There is a Ho trovato inutile il video.

11. Replacement Compatible MDR XB950BT MDR XB950B1 MDR XB950AP

Replacement Compatible MDR XB950BT MDR XB950B1 MDR XB950AP

It is compatible with the Sony MDR-XB950N1 and the Sony MDR-XB950AP. The head band cover for the Sony headphones is old, broken, cracked, and bad. It's easy to open and close a classic zipper. It protects your earphones from bumps, scratches and dirt. A durable headband improves wearing experience while avoiding hair product dirt. It's perfect for outdoor activities. Other accessories demo in the picture are not included. Any quality-related issues will be covered by a 12 months warranty.

Brand: Atneway

👤The foam and faux leather are covered. The problem of loose materials is dealt with.

Summary

What is the best product for headphone band cover sony?

Headphone band cover sony products from Linkidea. In this article about headphone band cover sony you can see why people choose the product. Jarmor and Krone Kalpasmos are also good brands to look for when you are finding headphone band cover sony.

What are the best brands for headphone band cover sony?

Linkidea, Jarmor and Krone Kalpasmos are some of the best brands that chosen by people for headphone band cover sony. Find the detail in this article. Geekria, Geekria and Geekria are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com