There was no tool needed. Zip up in place if you want to fit over the original headband. Don't remove the headband. Can be used to protect your headband. Product dimensions are 6.8 x 3.3 inches and color is black. The package has a headband cover.
👤What a great product. It matches even though it is not an original design. It's easy to install the zip up. There is a loop to hold the tab in place. There is a The product photo shows a top. I like having the zipper facing back so it is not visible from the sides. The elasticity of the neoprene material doesn't bother me at all because the zipper is a bit crooked.
👤I use my headphones when I travel. I noticed the headband was black when I hadn't traveled in over a year. I was thrilled to find an easy solution to the problem because I had already replaced the ear cups. I wanted to keep the old headband. Once you get the zipper seated, it's easy to install this cover. The headphones still fit in the case even after the cover has been installed. The cover is comfortable when the headphones are being used. I made sure to put it on the back side of the headband so that it wouldn't be obvious when you are wearing the headphones.
👤This is not a perfect replacement since it is not the same as the original Bose product, but it does cover up your headband. It is not a deal breaker and I can definitely recommend it. It was difficult for me to line up the track completely so that it wouldn't fall apart, but I was patient and it pulled up. I put the seam toward the back so that it's not visible when wearing the headset. I chose this one because the ends of the product have a finished seam giving it a more polished look.
👤I bought new ear cushions for my Bose headphones and Amazon offered them as an add-on. The headband had not deteriorated as much as the ear cushions, but I figured I'd get this as well. Especially at the low price. It was easy once I figured out a trick, but I have a bit of difficulty getting it on. I started the metal extension over the headphones. I was able to pull the head piece and complete the zipper after I got the zip going. There is no pain because the zip up sits on the top. There are still headphones in the case.
👤I use these as padding for my bare plastic headband. They make the headphones more comfortable to wear. These fit the headband on the Sony. They can be hard to install. You have to get the zip on the small one by threading it correctly and completely at the end. The cover wants to flop open all the time. If you use duct tape or a cable wrap to close the far end, you can keep the two sides of the pull together. The covers have not come undone once they have been put in place. They look like an accessory that was included with the original headphones.
👤I put this on my headphones. I have a small head, and the headphones slid around too much for me. I put a couple layers of packing foam on the bottom side of the headband after purchasing this cover. It had a perfect fit after being clipped onto the headphones. If this hadn't worked, I would have returned the headphones.
The package has a headband cover. The headband cover is compatible with most brand size headphones. Protect your headphones from dirt and sweat. A smooth surface and comfortable touch can be provided by high quality durable material. Excellent match, follows the shape perfectly. It's easy to install and use the durable zip closing. The package includes a headband cover for headphones.
👤I'm not sure if this is working or not. My new beats pros hurt my head, and I bought this to make them more comfortable to wear for long periods as I wear them sometimes for up to 12 hours a day between being online for work and school, and more often than not they still hurt. It doesn't feel like there's a lot of padding on this when it's on my head, so I'm still having some problems I have been taking to wearing a beanie or scarf instead of this on my beats. There are other ones that have more padding and will be more comfortable. If you have beats pros where you have to close them to turn them off this can be awkward.
👤I ran into a good sale price for a set of Rosewill ANC headphones. The cans have 40mm drives, a modular 3.5mm audio input, and can be switched on/off. There is a small loop in the middle of the protector that allows one to hang headphones on a hook. There is a The integrated headband cover on this set is one of those PU 'leather' shaped things that look nice, take little space when carried portable, but they press harder against your head than most of the wider flat-shaped bands. The headband is made of smooth PU leather. I was amazed by the quality of the headband protectors I received. The headband is well sewn together, stretchy to some extent, and the protectors are 1.5 inches wide in the padded area, so they stay on the headband securely. There is an anti-slip padding on the bottom of the protector. This part goes against you. It feels soft and prevents your headphones from twisting. There is a This cover enhances and improves my headphones. It seems to fit more headphones than the description suggests. The described item will fit well if the set comes with an 1.0" wide headband.
👤I had a pair of Koss headphones that I used to practice my guitar. I ended up with black particles in my hair every time I did this. I was looking for something to cover the headphones. There are a lot of these out there, but not for Koss. Most of the ones I found were too long. I decided to take a chance on them after finding them. These were correct, as Goldilocks would say. I really like them. They went on without a hitch, they feel nice, and I like the color. I'm only wearing these in the room where I play the guitar and they don't matter what color they are. I don't think they look bad. The Koss like these because they are longer on the underside and shorter on the top. They don't get in the way of folding or adjusting the headphones. I would recommend them to anyone. They are a good product at a good price. They solved my problem. You will not regret buying them.
👤I have headphones that are too big for my head and I wanted to add padding to them. This item doesn't have foam padding. It has a strip of thick fabric that only provides a small amount of padding. It seems like a nice product, but I bought it because I need actual padding, which this does not provide.
The ear pads are made with foam and leather. Give your headset a new accessory. It should be a brand new look. Product dimensions are 8.31 x 3.66 inches and color is black. The package has a headband cover.
👤I don't like the headband on my Steelseries Arctis Pro Wireless. I think it's really fatiguing. I don't have a large head, but the headband pulls on the roots of my hair in a way that really sucks. Steelseries really flubbed the headset when it came to comfort, but I love everything about my Arctis Pro Wireless. Maybe you're reading this review because you feel the same way. I started looking for some sort of padding for the steel headband on Amazon because I wanted to throw the stretchy headband in the trash. I was very excited when I measured the steel headband's circumference and found out that it is 9 cm wide when open. The actual distance between the buttons is 7 cm, not sure what the point is of listing that measurement. The strap technically fits around the Steelseries headband, but you're not close to snapping it in place. I think I should have put that together from the images, but I have a useless piece of leather. I hope you found my review and didn't repeat my mistake. There is a My next leads are the "Dekoni Audio Nuggets" or the pads designed for the HD280 Pro. I might not run into the same button issue because of the zippers on the ends. Cheers.
👤I bought this cushion pad to replace the cushion on a pair of headphones that were suffering from a case of Dandruff. I stopped using the headphones because the leatherette material from the original head band was bad. There is a I had to remove all of the original foam from the headband in order to get this cushion pad to fit. I had to use a credit card to remove some foam from the headband, but the cushion pad is very tight and does not look good. I was able to fix the broken snaps with a drop of super glue. This produce is inexpensive, and it solved an annoying problem with the M50 headphones. There is a This cushion pad isn't large enough to wrap around the existing headband cushion of the M50 headphones, but it will fit them, and I'm giving it a 4 stars.
👤I liked the sound of my Grado, but I hated the headband. I can't wear it for more than an hour, since the top of my head will hurt. My listening comfort has improved after I added a headband cushion pad and replaced foam ear pads with better ones. It's not quite to the standard of the DT-770 Pro, but good enough for a long period of listening. There is a There are a few notes. It's very tight and you might want to position it before snapping the buttons. There are two more When wearing the Grado GR-60, there is not much room for big hair because of the headband cushion and beefier ear pads.
👤The material is not leather, but it doesn't feel cheap, The snap locks make it so that once you set it on the headband you will not have to. There is a If you have the Monoprice 8323 headphones and use them for more than 1 hour at a time without feeling like the headset is trying to carve a hole in the middle of your head, the new cushion is a bit better than the originals. The only thing that has improved is the design of the headphones, but I still experience some irritation from the headband, so these just make it easier to use. The band is a good value. There is a The Pros are easy to install. It's not a big improvement in comfort.
All defean are produced under strict quality inspection and come with a 12-Month worry-free warranty. lifetime technical support. If there are any issues with your purchase, please contact them for replacement or refunds. The standard size is 60x20x15mm. You will receive a headband.
The ear pads are made with high quality foam and mesh fabric. Give your headset a new accessory. It should be a brand new look. Product dimensions are 7.28 x 0.98 inches. The package has a headband cover.
👤The band on my head is very comfortable. I hope this head band lasts longer than the original head band. The memory form deflated because the original head band was deflated. The price and the comfort are not inferior. If this head band lasts a long time, I might order another head band.
👤The plastic backing and the stretch cover are starting to split after a week of use. After a few more days of usage, the whole thing fell apart.
👤I hated the original pads. It gave me fatigue and hurt the top of my head. These pads are amazing. It was very comfortable. I forget that there is something on my head.
👤My headphones are semi comfortable for an okay price.
👤It's much cheaper to purchase one from Amazon.
👤I bought this pad because my original one is still going and I saw this pop-up, which is a huge difference. It was worth the price.
👤I have used HD650 for about 10 years and it has almost lost its shape. I decided to buy this cushion and it fits perfectly. There is a It's easy to replace the removal procedure that you have to search for on the internet. Highly recommended!
👤My original headband had worn out, so this replacement was a good choice.
👤The padding in the headband of my HD 650 has become flat and pathetic after many years of use. I decided to give this headband a try because I didn't want to pay a steep price for a replacement. It feels just as good as the original padding. It's easy to install, just take your time with a soft pry tool to remove the plastic retaining clip from the headphones. It is recommended.
👤Amazon exclusivamente por la rapidez y bajo coste del envo, ya that tienes similar al reCAMbio original. El embargo la almohadilla. tan slo durante el proceso de colocacin en la diadema del auricular. Esto no ocurre. There is a Recomiendo, ya demuestra ser ms duradero. No es ms caro.
👤In realta' e' considerata compatibile anche con HD 580,600,e6XX. La sto usando proprio ora, uguale a quella. Avevo provato anche la compatibile, a mio modesto giudizio, sono migliori. Consigliate.
👤I decided to get this version instead of the one that came with the HD600s because I like it a lot and the old padding was completely flattened out.
👤Sostituisce perfettamente l'originale, indistinguibile, vedremo con il tempo, per quanto l'originale.
Replacement headphones for the HD580/HD600/HD650. It is high elasticity, durable and soft. It's possible to make a replacement for your beloved headphones. It is made of high quality foam. Please note that it is not included in the note. The approach is 7.24 x 0.91 x 0.55.
👤I bought a used pair of 650s a few years ago and decided to get a new one because the headband was losing its shape. These were less expensive than the genuine ones, so I went with them. I was worried I would have to use double sided tape to attach them, but to my surprise, the headband that comes with the HD650 does not, so I am not sure if this applies to other models too. You need to remove the tabs from the old headband and say 'Made in Ireland'. The headband's base was the same as the one I was wearing, so I was able to slide it in and pop the tab back on. I've never felt a new genuine Sennheiser pad, so I can't compare the comfort to this, however it is a little bit firm. I'm not sure if that's just because I'm not used to it or it needs to be broken in, but it feels fine to me.
👤I got this along with some new ear cups to completely refresh my headphones. After 15 years of use, my original foam headband piece was flattened. The replacement band fit perfectly and restored the headphones to their original level of comfort. It was almost a shocking change as I no longer have the headband sitting on my head. Installation was easy. It wasn't easy either. If you're replacing the foam ear cups at the same time, I would recommend pulling out the old ones first so that you have more room to work on the headband. Not a problem if you don't. It will work better. To remove the old headband, you have to pop out the two tabs at the bottom of the headband that say Made In Ireland. They can be pried out with a tool. It takes a bit more force to pop them out than I was used to. I got them out without breaking anything. When you pop them out, you don't want to shoot them across the room. The old band can be pulled out once the tabs are out. You can see that it's sitting in two grooves on the headband part. The headband needs to slide into those grooves. It's not easy to get it all the way in there, but you can do it with a bit of pushing and pulling. You'll need to slip the screwdriver blade under the new band to get over the hump because there's a lever in the way. It should be easy to get the rest of the way once you do that. I thought the extra part at the end of the headband would sit under the tabs, but that's not the case. The headband is long enough to just touch the tabs, but not under them. You can pop the two tabs back in once the new headband is slid all the way in. The new foam headband will be much bigger than my old one, so you'll have to expand the headphones a bunch of stops.
The package contents are listed. A headband cushion. The alcohol pad is x2. The headband cover is compatible with most of the large-sized headphones. Protect your headphones from dirt and sweat. A smooth surface and comfortable touch can be provided by high quality durable material. Excellent match, follows the shape perfectly. It's easy to install and use the durable zip closing. The package includes a headband cover for headphones.
👤After a few hours of use, the headband on the Virtuosos hurts the top of my head. Hopefully this will make up for the issue. If the pad didn't have the tag and hoop, and the zip was a little better quality, this would be a 5 star review.
👤I have only had this headband cover for a few days, but it works perfectly for my headphones. The 2 1/2 inch width is the largest one. It's comfortable and distributes weight more evenly than just the headband, which is why it fits Focal headphones like a glove. It's important for heavier headphones. It has grey and red accents that match my headphones. Time will tell if it holds up, but it definitely feels sturdy. I bought it to prevent the foam on the headband from degrading, because it feels more durable than the stock foam. You don't want to have to replace the headband after you wear it, so consider this.
👤This is for the Corsica Islands. I wear my Corsair Virtuosos for 3-4 hours a day, but 7 to 10 hours grand total isn't out of the question. I spend most of my day at my PC. While I have a lighter pair of open back Koss UR40s, I prefer my Virtuosos for their closed back feel and the convenience of being wireless. The caveat? I decided to get some aftermarket padded earcups and the 1-8/9" cushion pad after seeing some positive reviews, because the Virtuosos are very uncomfortable in their stock form. Now? I can wear my Virtuosos all day long, and they don't make me miserable. I think this investment is worth it.
👤I was looking for a cover to help my headphones because the leather material on the headband was peeling off. I didn't want to look like I had a big case of it. I wanted a cover that matched my cans' white/silver/gray color scheme, and I didn't want the knitted covers that looked like sweaters for the headphones. There isn't a lot of reviews for this headband cover yet, but I took a chance on it. It worked out great. It protects the parts I need. The materials look nice and match my headphones' colors. There is a The zip up felt cheap and had a hard time staying together when I tried it. The trick that worked for me was to use one hand to hold down the end of the zip up. There is a The Small size fits well for anyone who has a V-Moss CrossfadeLP. The cover is too small at first but you have to stretch it. Trust me, it works. It takes some skill to wrestle it on, but the cover works well.
👤I like that the cover fits perfectly on the band, but it doesn't give me enough resistance as the headphones slide off my head, and it doesn't have enough padding to raise my headphones high enough to fit on my head. I need to place a headband on the crown of my head to make sure my headphones sit high enough to cover my ears, but they don't stay on the crown of head. I was hoping that the cover would add padding to make headphones fit properly. The cover does what it is supposed to, but not what I wanted them to do. I would like to find a cover that has more padding on the head-fitting side. This product should do the job if you are looking for a cover for your headphones. I ordered the 1 1/2” W Cushion Pad for the headphones and the cover, which is on the underside of the band.
The headband set is very similar to most Medium headphones. There is a lanyard loop on top of the headband. The headband can be easily installed and disassembled with the help of the Hook and loop design. The headband cover can still be used without a new headband if the headband pad is worn out. Skullcandy, Hesh2, Hesh3 and Hesh ANC are compatible with the headband cover. Product dimensions are 7.48 x 1.77 inches (19 x 4.5 cm). The package has a headband set.
👤Even though it doesn't fit my headphones, I tried to find another use for it. It's a great replacement for the thin sleeve that goes around the changing table. It's two pieces. It zips on. The sleeve and pillow part are covered in a type of pleather-vinyl hybrid that has some kind of Velcro on it. It doesn't smell and it keeps my son in place when I'm trying to change him. It does so without causing him distress when the table strap is tightened to fit. He calms down and lets me clean and change him better, instead of trying to get him back into anything, by taking something off, cleaning and hydrating him. I have to change the lens on my cellphone again because of the poor quality of the images. I'm going to buy a few more for his other items, like the Heao High Chair and his little rocking chair. The straps don't fit as well as they should because he's small at 20 lbs. He doesn't like the texture of the straps on him. This is an improvement. Thank you.
👤I thought my headset would fit. I agree. My head is too small and even with the headset set on the shortest length it still doesn't sit well on my head. I needed an extra padding piece to lift the headset up on my head so that it sat properly. I am so grateful for this product. It's easy to install and fix my problem without looking like I'm attaching something to my headset.
👤I don't fit my wireless headset the way I want it because of my small head. I used to have headaches after a couple hours but now wear my headset daily and have no problems. A new headset is much more expensive. It worked well and was true to size.
👤The headband is perfect for fixing the size of the Soundcore Q20. It's easy to install.
👤This is a great addition to the Hyperx Cloud Orbit S gaming headset and Audeze Mobius since they're nearly identical other than some technical features. The headset is great for gaming, but I found the headband very uncomfortable after a short time. Most headband covers don't offer much extra padding, but this one is so comfortable that I ordered more just in case they discontinued them or they don't last as long as you'd expect. If you have a big head and already have the headband expanded to the maximum or close to it, this might not work for you.
👤The comfort of the headphones went from being ok to being very comfortable. The headband was too big for me and even on their fully retracted setting they sat just below my ears. I initially tried another headband cover to give a slight lift, but then I tried the ones that were missing, and they gave me a slight lift, and also gave me some comfort, even though I wasn't aware they were missing. I thought I would need a longer cover. It's perfect. If you need to cover a worn out band or just add comfort to your headphones, I highly recommend this. If you want to add this to headbands that are 1.5 - 1.75 inches wide, you could use my band, which is roughly 1 inch wide.
The package has a headband set. It is high elasticity, durable and soft. Give your headphones a new lease on life. The package includes a headband.
👤This was bought for modifying my audio-technica m40x. I'm pretty sure I have the most comfortable set of m40x's ever. Cut this headband to fit, attach it with some strips of velcro, and they no longer bother me. If you have the m40x/m50x, I recommend doing this. It was easy, cheap, and satisfaction.
👤My old headphones made the top of my head uncomfortable. The band is short but the width is perfect. This seems to work well and makes it easier to install as there is more space on either side of the track to slide the band into without removing one of the ends. The padding is 1/2" thick.
👤The title says so. The Massdrop version of the 650's will be fixed. There is a It isn't comfortable. While I still have a big head of hair, I usually feel comfortable with it. These are not. They raise the headphones above your head so you don't feel like you're wearing a headband. They are not comfortable. I prefer my worn out stock headband cushion over the ones I wear. If Amazon didn't charge me $6 to replace them, I would return the product. It would cost me more than a dollar of gas to return it to them, so I decided to sell them at $7. There is a I give it 2/5 because of that.
👤I own the original HD600's and know what the headband feels like, so I bought these for another pair of headphones. There is a The form factor is barely the same as the original. There are 1. The headband was much larger. The pads have larger gaps. They will cover a smaller area of your head, concentrating the pressure point, instead of spreading it over a larger area. 2. The pads are stiff. Hard foam is being used instead of memory foam. I can't imagine these being comfortable after 15 minutes. 3. The price point is terrible. The cost is $9 with tax. I don't think they are worth much more than $5. 4. There was no glue. Maybe or maybe not. There is a There are 1 positives. The build quality seems decent. 2. There are male panels on either side of the piece. You could tape them around your headband. These are not HD 600 style headbands. Not in comfort, not in value, not in any shape or form.
👤I bought these for my friend. I was going to return it, but I realized I could affix it to the headband. It works well and feels sturdy on my head. I don't think there is a good alternative for the 280s other than the original headband or knitted looking one, so hope these last a few years. I saw some reviews that used strips of velcro for a cleaner look. I'm cheap and my wife has 100 hair ties.
👤The replacement part for the HD600 is awesome. After the foam broke down, my headband was completely flat. The replacement took about 2 minutes to install. The padding on this replacement part is very firm and will hold up. My original pads lasted about 6 years. The fit and finish on this replacement part was perfect, and did not require any adjustments.
Replacement earpads are made from foam and leather. Give your headset a new accessory. It should be a brand new look. Product dimensions are 5.35 x 1.33 inches and the color is black. The package has a headband cover.
👤I used this to replace my HD598. I stumbled on this as my best solution after researching online and Geekria's other solution with a zip up cover was tempting, but this was cheaper and would replace my headband. It's a good fit with more padding, even though the color doesn't match. It's not clear whether that padding is better. It's still good for the price because I think it offset the position of my head/ears a little too much. The HD598 owners' headband pad is slightly shorter than the original one, both in length and width. The width needs to be longer at the middle and the length needs to be a little longer at the ends. This is a straight width.
👤Even though the headband pad is advertised for headphones, I decided to fit it to my K550's. I found out that this model of headphones is hard to find because of its reputation for pad wear on the headband and ear pads. I bought the headset used online for about $50 and was pleasantly surprised by the sound, so I decided to use it. I found ear pads fairly easy to use. I read a lot of reviews and many of them complain that small things can affect the sound of the headphones. I think I'm lucky that the size of my head works well with the ear pads I found, because I get a good seal around my ears and a good sound. The headband pad began to peel off after finding earpads. I measured the metal headband, and it seemed like it might be close enough to work. I installed it today after it arrived last week. There is a This pad is slightly thicker and longer than the original one. I was able to do enough of a dry fit even before removing the old pad to realize that it would make the headset sit just a little higher on my head, but that brought the earpieces (speakers) only slightly higher on the ears, so that seemed acceptable. I realized that the earpieces wouldn't go all the way up to the #1 setting on the headband markings on either side with this new pad in place, but if I centered it properly, I could get each earpiece to go up as high as setting #2. The ear pads are dropped down a bit to the same spot on your head as the headband with a thinner pad. It looked like it would be a wash. The extra length would make them fit the same as before, but provide more comfort because of the thicker headband, which is a common complaint in the more negative reviews. The metal headband needs to be ripped off first. Depending on how clean you want it to be, you might spend a bit of time peeling off the bits that remain. I used some goo to clean the remains of the old pad, which was close to the edges of the metal headband. I didn't try to remove all of it, but I was reluctant to clean the center of the headband because I was afraid of damaging the ribbon cable. If I cleaned up the edges of the old, the new pad would cover it all. I stuck the new pad on after letting it dry completely. You can peel the backing off the new self-adhesive pad, center one end of it, between the 1 and 2 on the left side, and roll it onto the metal headband if you're ready. I've been wearing them all afternoon at work, they sound good, and I'm enjoying the feeling of accomplishment that comes with a successful project. It saved me money, but I'm happy with the result. This is a good choice if you need a new headband pad. Not quite a drop-in replacement, but as close as I've found, easy to do, and looks good, as long as you're not in a rush. You will be very pleased if you take it slowly.
The package has a headband cover. The full product description and installation video should be read before you start. O-Ugm2RAssU can be searched on you tube. It's necessary to make your own skills are required! They don't think you'll buy this product if you're not compatible with it. It was made with top quality leather. Specialised headband clips are included in the sale. The finished installation photos should be noted. Your phone will look different after installation. There is a package that includes 1 headband, 2 lips and a screwdriver. You will need scissors and a chisel to finish the job. These are not included in the sale.
👤The original headband cushion was placed onto the headphones during assembly, meaning once you cut it off, there was no way to put a new one on. There is a Don't worry about the zip that you see, this is a great design. If you have good skills, this is an easy replacement that looks great. The headband is comfortable. I tested it on a flight and it was just as comfortable as the original and fit in the case the same way. They have a video on line that you can watch and they also have a screwdriver that is very easy to use. The old headband can be removed with a scissor. The rest of the replacement can be completed with their included screwdriver. If you are familiar with the steps, you should watch their video at least once.
👤At the conclusion of my last international flight, I noticed that the top half of my body was covered in black. After 9 years, the foam of my Bose QC2s had begun to break. It was gross! I ordered replacement earpads on the Bose website. It seems like a major oversight by Bose that they didn't carry a replacement headband. It was only a matter of time before they carried replacement headbands and from three suppliers. I got in touch with Ron of Ron's Electric Sales about which one I should get considering that all three had high ratings, and he suggested that I get the accessory houses and the installation video was located at: I asked Ron if he could install the headphones for me because I didn't want to ruin them. He agreed to document the process with pictures and video and gave me his personal phone number in case I had any concerns. The replacement took only a week between when I sent him the headphones and when I got them back. There is a The quality of his work and replacement headband are both excellent. The plastic replacement clips are slightly different than the original Bose ones, but unless someone is looking really closely, they wouldn't be able to tell that the headband was a replacement. Ron's headband fit perfectly into the clips, with no issues like the ones that people had with Headcase Audios and HeadphoneMates. I was able to compare the material of Bose earpads to the accessory house headband after I got the replacement earpads. They are both made of foam. The Bose earpads are soft and comfortable, but the accessory house foam is just as soft. I am happy that I was able to give my QC2s a new lease on life, as the electronics were still going strong. Ron's service and support are both excellent and the accessory house replacement headband is a high quality solution to the problem. I highly recommend anyone who is in need of a replacement headband to check out accessory house.
👤It was a great fix. I replaced my ear cushions but on a recent trip, I saw black marks on my shirt and headband, and realized that they had deteriorated. The headband is a perfect replacement. There is a The installation video doesn't explain the tip that you should tuck the ends into the new clips. The video doesn't explain it well. I didn't realize that until I tried to put things back together. The "head" ends of the zipper go into the clips. The new clips have a bulge in them. The bulge on each side will not come un-done if the ends are done right.
Headphone band cushion products from Geekria. In this article about headphone band cushion you can see why people choose the product. Txesign and Geekria are also good brands to look for when you are finding headphone band cushion.
Geekria, Txesign and Geekria are some of the best brands that chosen by people for headphone band cushion. Find the detail in this article. Defean, Geekria and Jzliner are also brands that their products are worth to check.