Best Headphone Band Pad

Band 8 Aug 2022 10+ Comments Open

1. Replacement Headphone Headband Protector Installation

Replacement Headphone Headband Protector Installation

The package has a headband cover. It's quite comparable. Most big-sized headphones are compatible with the GEVO Headphone Headband Cover. HyperX-(Cloud 2/Cloud Alpha/Cloud II Wireless/Cloud Core/Cloud ALPHAS) The Shure-(SRH450/SRH450DJ/750DJ/) Corsair-(HS50/HS60/HS70),Logitech-(G PRO X),Corsair Gaming H2100 headset are listed. A very flexible headband cushion can be easily installed. Allow you to reuse. Quality materials and design, made of high-quality Knitted Fabric, improved and effectively protect your earphones from scratches. This is a note. Earphones with a narrow headband are not recommended because they will be loose after installation. The pack contains 1 x Headphone headband cover and 2 x Alcohol pad. The protectors cushion pad is 10x 4.3 inches. The headband cover can wrap the headphones.

Brand: G Gvoears

👤Even if it is thin, the headphone cover is made of nice material. When I tilt my head, this material keeps my headphones from sliding. It makes them easier to wear while I clean the house. Two years ago, I bought a cover on Amazon that moved my headphones all over and made them fall off. There is a This is the longest cover I've found. I can't find anything anymore. The seller will sell a cover that protects the joints where earphones twist. When I lay down to watch tv, those dig into my head.

👤It seems that high quality materials and high quality execution are very durable, but only time can tell. It is almost good enough for the Focal Clear but not quite there, but it is the closest that I could find. Highly recommended.

👤The leather of my headphones was peeling off. The cover keeps my head clean. It's in place. It doesn't conform to the headband exactly and sticks out a little, but it would give 5 stars.

👤Works well with PSB. M4U 1. I had to stretch it a bit but it was not unreasonable. Will probably buy another one.

👤The length was shorter than expected.

2. Replacement Headphone Audio Technica Panasonice Installation

Replacement Headphone Audio Technica Panasonice Installation

The package includes a headband. Most of the big-sized headphones are compatible. Quality materials and design, made of high-quality knitted fabric. Improve the comfort of headphones. It is easy to install a headband without tools. It can be washed by hand or machine. The headband cover for the headset can wrap the headphones beam. The package contents are listed. A headband cushion. The alcohol pad is x2.

Brand: G Gvoears

👤The Corsair Gaming H2100 headset still works great, but over the years the leather covering on the headband had started to chip, so I didn't want to use them anymore. I was covered in black particles when I put them on. I ordered this to fix the problem, and it did. I took a toothbrush to the original headband and used a cover to cover everything. It was a tight fit, but works well. It looks good, but it's not as comfortable on the top of my head as the original headband is, but it's not bad. I'm no longer covered in black.

👤The cushion on my headset is terrible. This is more of a covering than a cushion. This will hide the scratches or cracks on your headset.

👤I was looking for a quick and easy solution to repair my Audio Technica A50s, and this truly delivered for something that does not require sewing. There is a The material is stretchy and easy to install. The headband cover was cut to length and tucked under the edge clips for a clean look, but I did not do it myself. The color of the clasps is something I don't like. The cover still looks good, even though I wish they were black. I like cloth over leather because it's easy to clean. The cloth ear cups I got have given my headphones a new lease on life. If I decide to add padding to my headphones headband, I might buy this cover again. There is a This is a quality product that you will not regret buying.

👤This thing is a simple cover over the headband. If it fit well, there are bumps on it where the fabric isn't sitting right, and it's digging into my head. It's making my head hurt after about a month of use.

👤The headband cover is easy to use. The headband overhangs the end of the plastic headband and is too long for M50, so it's the main challenge. It's not noticeable when I wear the headphones. It might be a deal breaker if you are a visual perfectionist. They have been great. It's difficult to make a product work.

👤This adds no cushion at all. I have dish rags in my kitchen sink that would provide more padding. It's a cosmetic upgrade. I own an Audio Technica -M50x. The product has to be stretched so much to get around the headband that it's not as thick as it appears in the pictures. I can't even add my own padding to the stock headband because it gets compressed into a solid mass and is just as bad as the super tight stretching. It's disappointing. I can't recommend this product because it's currently advertised.

👤I tried the package for a full day. Installation is easy. I will have to see for myself if the material is elastic and hard enough to hold for a long time. If my impression changes in the future, I will update. My suggestion to the seller is to make the whole cover 2 cm longer so that it covers more of the headphones. If the buttons are inside, it will be more elegant. I am a pro- user. I'll be happy to purchase more and recommend it to my colleagues if these suggestions are actually done. There is a I highly recommend it for most AudioTechnica headphones. I have never tried it on another, so I don't know.

3. Genuine Sennheiser Foam Headband HD650

Genuine Sennheiser Foam Headband HD650

The headband is a new Genuine Sennheiser replacement. The headband pad will fit some models. The headband pads are made of soft material.

Brand: Sennheiser

👤The headband pad is worth the money for a replacement part. They look to be of great quality and are very comfortable. The HD 6XX style pad is still available. I'm not disappointed because they fit the 580s perfectly. It took a few minutes to install. You only have to use a butter knife to pry up one of the headband retainer clips on the underside of the headband, slide the old pad out, and then snap the clip back in place. If you're not completely confident in what you're doing, you may want to look for a video on the internet.

👤It made my HD-580s feel new. I have owned the 580s for 14 years and this simple replacement really makes a difference. The cushion was flattened. The plastic band on my head puts the speakers in a different position. The speaker cover had a hole in it and metal was touching my ear so I replaced it with a new one. The 580s are new. It's easy to install following videos on the internet.

👤The old pad was wrecked and now is much more comfortable. I should have checked on the website of the company, they sell the pad directly for about 1/2 the price. The seller is entitled to make money. I'll buy pads from Sennheiser direct, thank you very much!

👤If you want to replace this, don't pull directly on the old headband, you'll get glue on your hands and bits of headband fluff all over the place. If you want to remove the plastic end bit from the headband, you have to slide the cushion out, then clip the plastic end bit back in.

👤The way to go is genuine. The extra cost is worth it. The foam inserts used in the knock-off are denser and less comfortable than the genuine headband that I bought. Don't support the companies that make low quality parts. You think it would be easy to recreate a headband. You can get this genuine part instead of having your head pinched. Big shout out to Sennheiser for their tool-less designs. It's easy to install.

👤My old HD650 pad was so flat that it injured my head. It took me a few days to figure out why I was injured. I ordered this when I realized it was the lack of padding. It is easy to disassemble the HD650, so it is necessary to remove the old one and slide in the new one.

👤I ordered this one because I liked the original one and it was the same headband with original packaging. The price for a piece of pad was ridiculous. There is a There is an edit. The product came with a tear but Amazon was able to provide a solution.

👤The HD 650 headphones were new but without the old style clamps that they had after a few years. Replacing the pads after a year or two will make a big difference. There is a If you ask me, it's worth it to get the original Sennheiser pads.

4. Soundlink Universal Replacement Protector Headphones

Soundlink Universal Replacement Protector Headphones

The package contents are listed. A headband cushion. The alcohol pad is x2. The headband cover is compatible with most of the large-sized headphones. Protect your headphones from dirt and sweat. A smooth surface and comfortable touch can be provided by high quality durable material. Excellent match, follows the shape perfectly. It's easy to install and use the durable zip closing. The package includes a headband cover for headphones.

Brand: Txesign

👤After a few hours of use, the headband on the Virtuosos hurts the top of my head. Hopefully this will make up for the issue. If the pad didn't have the tag and hoop, and the zip was a little better quality, this would be a 5 star review.

👤I have only had this headband cover for a few days, but it works perfectly for my headphones. The 2 1/2 inch width is the largest one. It's comfortable and distributes weight more evenly than just the headband, which is why it fits Focal headphones like a glove. It's important for heavier headphones. It has grey and red accents that match my headphones. Time will tell if it holds up, but it definitely feels sturdy. I bought it to prevent the foam on the headband from degrading, because it feels more durable than the stock foam. You don't want to have to replace the headband after you wear it, so consider this.

👤This is for the Corsica Islands. I wear my Corsair Virtuosos for 3-4 hours a day, but 7 to 10 hours grand total isn't out of the question. I spend most of my day at my PC. While I have a lighter pair of open back Koss UR40s, I prefer my Virtuosos for their closed back feel and the convenience of being wireless. The caveat? I decided to get some aftermarket padded earcups and the 1-8/9" cushion pad after seeing some positive reviews, because the Virtuosos are very uncomfortable in their stock form. Now? I can wear my Virtuosos all day long, and they don't make me miserable. I think this investment is worth it.

👤I was looking for a cover to help my headphones because the leather material on the headband was peeling off. I didn't want to look like I had a big case of it. I wanted a cover that matched my cans' white/silver/gray color scheme, and I didn't want the knitted covers that looked like sweaters for the headphones. There isn't a lot of reviews for this headband cover yet, but I took a chance on it. It worked out great. It protects the parts I need. The materials look nice and match my headphones' colors. There is a The zip up felt cheap and had a hard time staying together when I tried it. The trick that worked for me was to use one hand to hold down the end of the zip up. There is a The Small size fits well for anyone who has a V-Moss CrossfadeLP. The cover is too small at first but you have to stretch it. Trust me, it works. It takes some skill to wrestle it on, but the cover works well.

👤I like that the cover fits perfectly on the band, but it doesn't give me enough resistance as the headphones slide off my head, and it doesn't have enough padding to raise my headphones high enough to fit on my head. I need to place a headband on the crown of my head to make sure my headphones sit high enough to cover my ears, but they don't stay on the crown of head. I was hoping that the cover would add padding to make headphones fit properly. The cover does what it is supposed to, but not what I wanted them to do. I would like to find a cover that has more padding on the head-fitting side. This product should do the job if you are looking for a cover for your headphones. I ordered the 1 1/2” W Cushion Pad for the headphones and the cover, which is on the underside of the band.

5. Headphone Replacement Headphones QuietComfort Installation

Headphone Replacement Headphones QuietComfort Installation

There was no tool needed. Zip up in place if you want to fit over the original headband. Don't remove the headband. Can be used to protect your headband. This headband is compatible with Bose headphones. Product dimensions are 6.7 x 3.3 inches (17 x 8.5 cm). The package has a headband cover.

Brand: Geekria

👤My puppy devoured the foam ear pads and head band of my Bose headphones. The best of the offerings was the Geerkria, and I looked for a replacement. Bose does not offer a replacement band. The solution for the Geerkria is a good one, but it doesn't really work and detracts from the overall appearance. The neophrene cover is not a fitted piece to replace the foam cushion on the QC35, it is simply a neophrene cover that has a zip that fits over the headband. It doesn't provide any cushion, and looks odd when installed. I wouldn't have bought it if I had seen it installed. You bought a $300 pair of headphones and are adding a cheap replacement headband that looks like it came from the checkout counter at a convenience store. It would have been easy for Geerkria to add strips of foam to fill the void in their headband. They provided a thin piece of neoprene with a zip up. I can't make a comparison because I haven't purchased any other replacement option. I became even more dissatisfied after using the Geekria product. It is a thin piece of neoprene with a zip. I bought the replacement headband from Accessory House Global USA. It costs twice as much, but is a quality product that I am proud to use on my Bose headphones. The Geekria headband replacement was returned for a refund. I posted a longer review of the accessory house replacement headband in their product reviews.

👤There are two sizes for these headband covers. The larger one was this one. I'm glad I went big because it fits right. The ear covers are not sold together. They give you two pairs for a total of four. I've taken good care of my Koss and barely use it, but the fake leather started peeling and leaving black bits everywhere. It was difficult to clean up. This happens to most headphones eventually. I don't like throwing things out when they don't work anymore, so I have saved my current headphones from the landfill. I am satisfied with my purchase. It took less than 5 minutes to make my headphones usable again.

👤I bought this to fix my headband on my old SteelSeries Flux headphones. I know these are for Bose, but Geekria made sure to include the dimensions of the headband. I compared those to my headphones. There is a The fit is perfect. Installation is not a two person job. I had no issue with my left hand doing most of the work because I was right handed. The trick is to move the lock into the locked position by bringing the zip up all the way down. Then zip the sleeve up after securing the two halves of the zipper together. It's easy, lemon! I have short hair and the rubber headband on the SteelSeries Flux pulls on it when I move around. The addition of this sleeve to a pair of neglected headphones is welcome. Thankfully, due to the nature of the material used, there is just enough slack to keep the sleeve from being on top. I plan on buying a gray version of the SteelSeries Flux headphones that I use for travel.

6. Compatible QuietComfort Headphones Screwdriver Replacement

Compatible QuietComfort Headphones Screwdriver Replacement

Replacement earpads are made from foam and leather. Give your headset a new accessory. It should be a brand new look. Product dimensions are 5.91 x 1.10 inches (15 x 2.8 cm). The package has a headband cover.

Brand: Geekria

👤The replacement for the old padding doesn't fit into the brackets that held the old padding, it doesn't look good, and it doesn't work well. I destroyed the original bose padding because this product didn't work. Buying the bulky zipper covers will hide the old padding.

👤It was easy to install. I removed the end pieces from the old one. It was held in place by a velcro fastening. It was difficult to get the end pieces back on. I got it after a few tries. There is a small gap that is still from the velcro. It looks incomplete. That is critical because it still looks better than the old one. The foam is not as soft as it could be. Replacing the earpieces and headband took about an hour.

👤It's better looking than I expected. It seems like it will be the same as the original. It was possible to use clear instructions on what to remove from the headband. It's not clear if you're supposed to remove the foam from the headband, or if you're supposed to remove the plastic from it.

👤You should review some installation videos in a couple of minutes if you follow the instructions. It looks decent and gave me a new chance at life, it doesn't look like the original.

👤I am very happy with my headphones. It's easy to clean after wearing them. Bose should have used this material when he bought them. There is a It is very easy to install.

👤I'll buy again, it's just a little tight, but better than loose.

👤The replacement headband and ear pads are easy to replace.

👤Excellent replacement. Bose use tiny screws. It took 10 minutes to cut off the old and replace it with the new. It was just as comfortable and warm.

👤I was debating over installing the wrap around version with a zip up. I am very happy I went with these ones. 4 small screws and an exacto knife are all it takes to cut off the old. The comfort and feel is almost the same as it was when they were brand new. I was amazed! Changing the ear pads completely refreshed my QC35's. It was perfect!

👤Ich ist das Kopfband. Im Klettverschluss ist das gute Alternative. The Komfort ist gut, jedoch etwas hart im Vergleich zum Original. Dennoch was nun etwas klobiger. Ansonsten super Preis-/Leistungsverhltnis.

👤I ha gustado mucho. Se siente al tocarlo y en mi cabeza. Amigos, se ve y siente de la calidad.

👤Excellent quality and easy to install.

7. Replacement Headband QC2 QC15 Headphones

Replacement Headband QC2 QC15 Headphones

The package has a headband cover. The full product description and installation video should be read before you start. O-Ugm2RAssU can be searched on you tube. It's necessary to make your own skills are required! They don't think you'll buy this product if you're not compatible with it. It was made with top quality leather. Specialised headband clips are included in the sale. The finished installation photos should be noted. Your phone will look different after installation. There is a package that includes 1 headband, 2 lips and a screwdriver. You will need scissors and a chisel to finish the job. These are not included in the sale.

Brand: Accessory House

👤The original headband cushion was placed onto the headphones during assembly, meaning once you cut it off, there was no way to put a new one on. There is a Don't worry about the zip that you see, this is a great design. If you have good skills, this is an easy replacement that looks great. The headband is comfortable. I tested it on a flight and it was just as comfortable as the original and fit in the case the same way. They have a video on line that you can watch and they also have a screwdriver that is very easy to use. The old headband can be removed with a scissor. The rest of the replacement can be completed with their included screwdriver. If you are familiar with the steps, you should watch their video at least once.

👤At the conclusion of my last international flight, I noticed that the top half of my body was covered in black. After 9 years, the foam of my Bose QC2s had begun to break. It was gross! I ordered replacement earpads on the Bose website. It seems like a major oversight by Bose that they didn't carry a replacement headband. It was only a matter of time before they carried replacement headbands and from three suppliers. I got in touch with Ron of Ron's Electric Sales about which one I should get considering that all three had high ratings, and he suggested that I get the accessory houses and the installation video was located at: I asked Ron if he could install the headphones for me because I didn't want to ruin them. He agreed to document the process with pictures and video and gave me his personal phone number in case I had any concerns. The replacement took only a week between when I sent him the headphones and when I got them back. There is a The quality of his work and replacement headband are both excellent. The plastic replacement clips are slightly different than the original Bose ones, but unless someone is looking really closely, they wouldn't be able to tell that the headband was a replacement. Ron's headband fit perfectly into the clips, with no issues like the ones that people had with Headcase Audios and HeadphoneMates. I was able to compare the material of Bose earpads to the accessory house headband after I got the replacement earpads. They are both made of foam. The Bose earpads are soft and comfortable, but the accessory house foam is just as soft. I am happy that I was able to give my QC2s a new lease on life, as the electronics were still going strong. Ron's service and support are both excellent and the accessory house replacement headband is a high quality solution to the problem. I highly recommend anyone who is in need of a replacement headband to check out accessory house.

👤It was a great fix. I replaced my ear cushions but on a recent trip, I saw black marks on my shirt and headband, and realized that they had deteriorated. The headband is a perfect replacement. There is a The installation video doesn't explain the tip that you should tuck the ends into the new clips. The video doesn't explain it well. I didn't realize that until I tried to put things back together. The "head" ends of the zipper go into the clips. The new clips have a bulge in them. The bulge on each side will not come un-done if the ends are done right.

8. Headband QuietComfort Headphones Screwdriver Replacement

Headband QuietComfort Headphones Screwdriver Replacement

The ear pads are made with foam and leather. Give your headset a new accessory. It should be a brand new look. Product dimensions are 5.91 x 1.10 inches (15 x 2.8 cm). The package has a headband cover.

Brand: Geekria

👤It is easy to install and looks good. Make sure to cut out the original headband on the outer side so you don't damage the original foam cushion. You can still install a new headband on top of the original foam cushion, but it makes it better. The easy assembling process is something I like. I wish the finish was a bit more discret on the edge. A nice little driver was included.

👤The Bose Soundlink is not compatible, but I decided to try it out anyway. The only complaint is the small holes on each end, but it doesn't bother me. The tool it came with made it easy to install. It took less than two minutes. I attached the photos for reference.

👤I was expecting a better product than the Bose headphones I received. It was very difficult to install because of the holding of the headband in place, putting the brackets on, and installing the tiny screws. I'm not happy with how the headband looks now that it's installed, but I guess it's better than the old headband, as long as it stays in place.

👤It's easy to install. I only had to take off the old sleeve for 5 minutes. It is very soft and cleans better than the headphones.

👤There is a huge comfort difference. If you really use some muscle, you can keep the old cushion on. It was worth it. Looks good.

👤It is very easy to replace. The magnetic screwdriver made supper easy.

👤It doesn't fit around the headband. You can see the giant connection.

👤You just wrap it around, no need to disassemble it.

👤The headband does look good once on. I didn't have instructions on how to install it, but I have done a number of similar repairs over the years and they all follow the same steps. I didn't have any issues. The band wraps around the headphones and closes with a piece of velcro. The Bose clips secure it and hide the ends. The seam where the band is attached to itself is visible in the pictures, but I made it face back to hide it. I have it on my headphones for about 24 hours, but it's so good that I can't say how long it will last. If it starts tearing, I can replace it again.

👤Is it meinem? Bose QC 35 ist, das ist. Ich bin in der Bild gestoen. Hilfe is the des alten. Im gut ist das anbringen. The Montage war gerade. Leider ist das Polster. The Abzug is called the "Stern Abzug". Klett Kante ist es fr die stark. Strt visuell.

👤The handband is good, but they send the wrong screwdriver. I can't replace it. The company sent the correct screwdriver and the headband fit perfectly.

👤It is easy to install and looks respectable. When cutting off the old headband, be careful not to damage the wire underneath. You can watch a video online to see it done.

👤The Ersatzband passt nahezu perfekt. The versprochene. Im Preis wenig berraschend ist war leider.

9. Replacement QuietComfort Headphones Protector Installation

Replacement QuietComfort Headphones Protector Installation

There was no tool needed. Zip up in place if you want to fit over the original headband. Don't remove the headband. Can be used to protect your headband. Product dimensions are 6.8 x 3.3 inches and color is black. The package has a headband cover.

Brand: Geekria

👤What a great product. It matches even though it is not an original design. It's easy to install the zip up. There is a loop to hold the tab in place. There is a The product photo shows a top. I like having the zipper facing back so it is not visible from the sides. The elasticity of the neoprene material doesn't bother me at all because the zipper is a bit crooked.

👤I use my headphones when I travel. I noticed the headband was black when I hadn't traveled in over a year. I was thrilled to find an easy solution to the problem because I had already replaced the ear cups. I wanted to keep the old headband. Once you get the zipper seated, it's easy to install this cover. The headphones still fit in the case even after the cover has been installed. The cover is comfortable when the headphones are being used. I made sure to put it on the back side of the headband so that it wouldn't be obvious when you are wearing the headphones.

👤This is not a perfect replacement since it is not the same as the original Bose product, but it does cover up your headband. It is not a deal breaker and I can definitely recommend it. It was difficult for me to line up the track completely so that it wouldn't fall apart, but I was patient and it pulled up. I put the seam toward the back so that it's not visible when wearing the headset. I chose this one because the ends of the product have a finished seam giving it a more polished look.

👤I bought new ear cushions for my Bose headphones and Amazon offered them as an add-on. The headband had not deteriorated as much as the ear cushions, but I figured I'd get this as well. Especially at the low price. It was easy once I figured out a trick, but I have a bit of difficulty getting it on. I started the metal extension over the headphones. I was able to pull the head piece and complete the zipper after I got the zip going. There is no pain because the zip up sits on the top. There are still headphones in the case.

👤I use these as padding for my bare plastic headband. They make the headphones more comfortable to wear. These fit the headband on the Sony. They can be hard to install. You have to get the zip on the small one by threading it correctly and completely at the end. The cover wants to flop open all the time. If you use duct tape or a cable wrap to close the far end, you can keep the two sides of the pull together. The covers have not come undone once they have been put in place. They look like an accessory that was included with the original headphones.

👤I put this on my headphones. I have a small head, and the headphones slid around too much for me. I put a couple layers of packing foam on the bottom side of the headband after purchasing this cover. It had a perfect fit after being clipped onto the headphones. If this hadn't worked, I would have returned the headphones.

10. Geekria Headband Replacement Sennheiser Headphones

Geekria Headband Replacement Sennheiser Headphones

The headband pads are made of velour. Give your headset a new accessory. It should be a brand new look. Product dimensions are 5.5 x 1.45 inches (14 x 3.7 cm). The package has a headband cover.

Brand: Geekria

👤The old and flat foam pad on my 558s was replaced with this. There is a The pros are 1. It feels brand new because of the comfortable foam. There is a Neutral 1. The fit is mostly right according to the other reviewer. It's not a big deal. There is a Cons 1. The sticky side of mine is not very good. As soon as I open the headphones to put them on my head, there is a gap between the sticky side and the headphone itself. There is a I only removed a star because it's not the biggest deal. I bought this along with a set of official pads from Sennheiser and my 558s feel brand new again. I would like the sticky side of this to be more sticky. I recommend it if you don't. * January 2021 has been updated. The sticky side has become a bigger and bigger problem for me. When I open the headphones to put them on, the pad falls off. When the gap exists, hair and dust get in there over a period of time, and it eventually kills the sticky, so I plan on buying a new set and hoping it goes better. I'm investigating ways to fix it, but I don't feel like the sticky side of it will last long before the padded side does. Decreased from 4 stars to 3 stars. I saw some reviews that said the problem with the glue was fixed and they started using a stronger glue. I bought another one and tried it out, since the one I had was terrible. I could tell there was a difference between this one and the one I bought a year ago by peeling off the 3m tape. It seems to stick better. I usually clean the headband with cotton balls and rubbing alcohol, and then put it on. It still shows a small gap, but it's not as big as before. I am going to use rubber bands and not touch it for a few days to make sure I don't have any problems. Hopefully this one does better. There is a It's a success if you don't see any future updates from me. 3 stars back to 2 stars.

👤You need to center it on a curved surface because the pad is small and there's a gap on the ends. Installation is difficult because of this. The glue is not great. If you open the headphones to put them on, the pad will get stuck in the middle. Once the headphones are in a steady state, it goes back to normal. I couldn't find an original pad from Sennheiser, I only saw the headband with wires and it seems excessive. I put the pad in a roll to curve it. I put it in the headphones. I used a duct tape role and heavy objects to try to keep the pad sealed for a few days. It has a gap when you open them up to put on the pads that the original one does not have. It does function, but don't expect it to be perfect. The glue is useless now. Every single use it falls off. I'm going to use my own tape to fix it.

11. Universal Replacement Protector Compatible Headphones

Universal Replacement Protector Compatible Headphones

The package has a headband cover. The headband cover is compatible with most brand size headphones. Protect your headphones from dirt and sweat. A smooth surface and comfortable touch can be provided by high quality durable material. Excellent match, follows the shape perfectly. It's easy to install and use the durable zip closing. The package includes a headband cover for headphones.

Brand: Txesign

👤I'm not sure if this is working or not. My new beats pros hurt my head, and I bought this to make them more comfortable to wear for long periods as I wear them sometimes for up to 12 hours a day between being online for work and school, and more often than not they still hurt. It doesn't feel like there's a lot of padding on this when it's on my head, so I'm still having some problems I have been taking to wearing a beanie or scarf instead of this on my beats. There are other ones that have more padding and will be more comfortable. If you have beats pros where you have to close them to turn them off this can be awkward.

👤I ran into a good sale price for a set of Rosewill ANC headphones. The cans have 40mm drives, a modular 3.5mm audio input, and can be switched on/off. There is a small loop in the middle of the protector that allows one to hang headphones on a hook. There is a The integrated headband cover on this set is one of those PU 'leather' shaped things that look nice, take little space when carried portable, but they press harder against your head than most of the wider flat-shaped bands. The headband is made of smooth PU leather. I was amazed by the quality of the headband protectors I received. The headband is well sewn together, stretchy to some extent, and the protectors are 1.5 inches wide in the padded area, so they stay on the headband securely. There is an anti-slip padding on the bottom of the protector. This part goes against you. It feels soft and prevents your headphones from twisting. There is a This cover enhances and improves my headphones. It seems to fit more headphones than the description suggests. The described item will fit well if the set comes with an 1.0" wide headband.

👤I had a pair of Koss headphones that I used to practice my guitar. I ended up with black particles in my hair every time I did this. I was looking for something to cover the headphones. There are a lot of these out there, but not for Koss. Most of the ones I found were too long. I decided to take a chance on them after finding them. These were correct, as Goldilocks would say. I really like them. They went on without a hitch, they feel nice, and I like the color. I'm only wearing these in the room where I play the guitar and they don't matter what color they are. I don't think they look bad. The Koss like these because they are longer on the underside and shorter on the top. They don't get in the way of folding or adjusting the headphones. I would recommend them to anyone. They are a good product at a good price. They solved my problem. You will not regret buying them.

👤I have headphones that are too big for my head and I wanted to add padding to them. This item doesn't have foam padding. It has a strip of thick fabric that only provides a small amount of padding. It seems like a nice product, but I bought it because I need actual padding, which this does not provide.

Summary

What is the best product for headphone band pad?

Headphone band pad products from G Gvoears. In this article about headphone band pad you can see why people choose the product. G Gvoears and Sennheiser are also good brands to look for when you are finding headphone band pad.

What are the best brands for headphone band pad?

G Gvoears, G Gvoears and Sennheiser are some of the best brands that chosen by people for headphone band pad. Find the detail in this article. Txesign, Geekria and Geekria are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com