Best Headphone Band Padding

Band 1 Feb 2023 10+ Comments Open

1. SCR Headband Compatible Replacement Headphones

SCR Headband Compatible Replacement Headphones

The HD280, HD 280 PRO, HMD 280, HMD 280 PRO, HMD280-XQ are compatible with the Sennheiser headphones models. No tools needed for a quick and easy replacement. The material is high quality. The memory foam has a comfortable fit.

Brand: Scr

👤The old headband on my computer needed to be replaced. I took one star off because it is manufactured straight and doesn't have a slight curve like the original did, which causes it to be a little squishy in the middle and for the ends to be lifted up. This is not a big deal. There is a stock headband next to this item. Since this is the only replacement I've been able to find, I would definitely recommend it.

👤I bought these along with a new set of headphones because they were less expensive than the factory-replacement which cost more than half of a new set. I didn't want to spend $50 on padding when my HD280's broke where the ear-cups extended. It's better to replace the whole unit. The price of these pads made it attractive to fix up my old pair and get what I can out of them until they fail. There is a The padding works like the original. It is comfortable. The material that holds the ear pads to the ear cups is a bit thinner and less durable than the other materials. I thought it might be due to hardened plastic, but when I compared it to the ones on my new set, it was not the case. Time will tell how well they will hold up. I won't complain about the price difference. There is a The ear cups have a challenge stretching the plastic over and into the slot. The company has directions. Work it around on a narrow end. Be careful and patient. I had to work it around for a while before the pads were fastened. The comfort is restored after that. There is a The top pad is easy to install. There is a We are very satisfied with the product and price.

👤I'm confused by the reviews. If you don't care about sound quality much, they're a good replacement. Why did they buy HD-280s? There is a I stopped giving them a thumbs up because they're not too much trouble to get on and they're comfortable like the originals. The sound quality is degraded because the internal foam is not as dense. I can hear more noise coming from outside. I'm looking for new headphones after I submit this review because the sound quality is so bad. The pleather feels cheaper and less durable, but we'll see how it holds up. Update- Another star was removed. I kept the new headphones in the mix because they're the same as the ones I bought. They may follow the dodo bird because of this foam replacement. The speaker surface is resting against my ears as the foam collapses. This is not a replacement foam. It's just a resemblance.

👤The headband padding on the old model of HD 280 Pros was very uncomfortable to wear for a few minutes and it was a decade ago. It was difficult to find the original part for this model, but this headband seemed to fit. It took a bit of effort and I'm not sure I lined the fastening completely, but it does fit and doesn't seem to slide around.

2. Geekria Headband Sennheiser Headphones Replacement

Geekria Headband Sennheiser Headphones Replacement

Replacement earpads are made from foam and leather. Give your headset a new accessory. It should be a brand new look. Product dimensions are 5.35 x 1.33 inches and the color is black. The package has a headband cover.

Brand: Geekria

👤I used this to replace my HD598. I stumbled on this as my best solution after researching online and Geekria's other solution with a zip up cover was tempting, but this was cheaper and would replace my headband. It's a good fit with more padding, even though the color doesn't match. It's not clear whether that padding is better. It's still good for the price because I think it offset the position of my head/ears a little too much. The HD598 owners' headband pad is slightly shorter than the original one, both in length and width. The width needs to be longer at the middle and the length needs to be a little longer at the ends. This is a straight width.

👤Even though the headband pad is advertised for headphones, I decided to fit it to my K550's. I found out that this model of headphones is hard to find because of its reputation for pad wear on the headband and ear pads. I bought the headset used online for about $50 and was pleasantly surprised by the sound, so I decided to use it. I found ear pads fairly easy to use. I read a lot of reviews and many of them complain that small things can affect the sound of the headphones. I think I'm lucky that the size of my head works well with the ear pads I found, because I get a good seal around my ears and a good sound. The headband pad began to peel off after finding earpads. I measured the metal headband, and it seemed like it might be close enough to work. I installed it today after it arrived last week. There is a This pad is slightly thicker and longer than the original one. I was able to do enough of a dry fit even before removing the old pad to realize that it would make the headset sit just a little higher on my head, but that brought the earpieces (speakers) only slightly higher on the ears, so that seemed acceptable. I realized that the earpieces wouldn't go all the way up to the #1 setting on the headband markings on either side with this new pad in place, but if I centered it properly, I could get each earpiece to go up as high as setting #2. The ear pads are dropped down a bit to the same spot on your head as the headband with a thinner pad. It looked like it would be a wash. The extra length would make them fit the same as before, but provide more comfort because of the thicker headband, which is a common complaint in the more negative reviews. The metal headband needs to be ripped off first. Depending on how clean you want it to be, you might spend a bit of time peeling off the bits that remain. I used some goo to clean the remains of the old pad, which was close to the edges of the metal headband. I didn't try to remove all of it, but I was reluctant to clean the center of the headband because I was afraid of damaging the ribbon cable. If I cleaned up the edges of the old, the new pad would cover it all. I stuck the new pad on after letting it dry completely. You can peel the backing off the new self-adhesive pad, center one end of it, between the 1 and 2 on the left side, and roll it onto the metal headband if you're ready. I've been wearing them all afternoon at work, they sound good, and I'm enjoying the feeling of accomplishment that comes with a successful project. It saved me money, but I'm happy with the result. This is a good choice if you need a new headband pad. Not quite a drop-in replacement, but as close as I've found, easy to do, and looks good, as long as you're not in a rush. You will be very pleased if you take it slowly.

3. Replacement QuietComfort Headphones Protector Installation

Replacement QuietComfort Headphones Protector Installation

There was no tool needed. Zip up in place if you want to fit over the original headband. Don't remove the headband. Can be used to protect your headband. Product dimensions are 6.8 x 3.3 inches and color is black. The package has a headband cover.

Brand: Geekria

👤What a great product. It matches even though it is not an original design. It's easy to install the zip up. There is a loop to hold the tab in place. There is a The product photo shows a top. I like having the zipper facing back so it is not visible from the sides. The elasticity of the neoprene material doesn't bother me at all because the zipper is a bit crooked.

👤I use my headphones when I travel. I noticed the headband was black when I hadn't traveled in over a year. I was thrilled to find an easy solution to the problem because I had already replaced the ear cups. I wanted to keep the old headband. Once you get the zipper seated, it's easy to install this cover. The headphones still fit in the case even after the cover has been installed. The cover is comfortable when the headphones are being used. I made sure to put it on the back side of the headband so that it wouldn't be obvious when you are wearing the headphones.

👤This is not a perfect replacement since it is not the same as the original Bose product, but it does cover up your headband. It is not a deal breaker and I can definitely recommend it. It was difficult for me to line up the track completely so that it wouldn't fall apart, but I was patient and it pulled up. I put the seam toward the back so that it's not visible when wearing the headset. I chose this one because the ends of the product have a finished seam giving it a more polished look.

👤I bought new ear cushions for my Bose headphones and Amazon offered them as an add-on. The headband had not deteriorated as much as the ear cushions, but I figured I'd get this as well. Especially at the low price. It was easy once I figured out a trick, but I have a bit of difficulty getting it on. I started the metal extension over the headphones. I was able to pull the head piece and complete the zipper after I got the zip going. There is no pain because the zip up sits on the top. There are still headphones in the case.

👤I use these as padding for my bare plastic headband. They make the headphones more comfortable to wear. These fit the headband on the Sony. They can be hard to install. You have to get the zip on the small one by threading it correctly and completely at the end. The cover wants to flop open all the time. If you use duct tape or a cable wrap to close the far end, you can keep the two sides of the pull together. The covers have not come undone once they have been put in place. They look like an accessory that was included with the original headphones.

👤I put this on my headphones. I have a small head, and the headphones slid around too much for me. I put a couple layers of packing foam on the bottom side of the headband after purchasing this cover. It had a perfect fit after being clipped onto the headphones. If this hadn't worked, I would have returned the headphones.

4. Replacement Headphone Audio Technica Panasonice Installation

Replacement Headphone Audio Technica Panasonice Installation

The package includes a headband. Most of the big-sized headphones are compatible. Quality materials and design, made of high-quality knitted fabric. Improve the comfort of headphones. It is easy to install a headband without tools. It can be washed by hand or machine. The headband cover for the headset can wrap the headphones beam. The package contents are listed. A headband cushion. The alcohol pad is x2.

Brand: G Gvoears

👤The Corsair Gaming H2100 headset still works great, but over the years the leather covering on the headband had started to chip, so I didn't want to use them anymore. I was covered in black particles when I put them on. I ordered this to fix the problem, and it did. I took a toothbrush to the original headband and used a cover to cover everything. It was a tight fit, but works well. It looks good, but it's not as comfortable on the top of my head as the original headband is, but it's not bad. I'm no longer covered in black.

👤The cushion on my headset is terrible. This is more of a covering than a cushion. This will hide the scratches or cracks on your headset.

👤I was looking for a quick and easy solution to repair my Audio Technica A50s, and this truly delivered for something that does not require sewing. There is a The material is stretchy and easy to install. The headband cover was cut to length and tucked under the edge clips for a clean look, but I did not do it myself. The color of the clasps is something I don't like. The cover still looks good, even though I wish they were black. I like cloth over leather because it's easy to clean. The cloth ear cups I got have given my headphones a new lease on life. If I decide to add padding to my headphones headband, I might buy this cover again. There is a This is a quality product that you will not regret buying.

👤This thing is a simple cover over the headband. If it fit well, there are bumps on it where the fabric isn't sitting right, and it's digging into my head. It's making my head hurt after about a month of use.

👤The headband cover is easy to use. The headband overhangs the end of the plastic headband and is too long for M50, so it's the main challenge. It's not noticeable when I wear the headphones. It might be a deal breaker if you are a visual perfectionist. They have been great. It's difficult to make a product work.

👤This adds no cushion at all. I have dish rags in my kitchen sink that would provide more padding. It's a cosmetic upgrade. I own an Audio Technica -M50x. The product has to be stretched so much to get around the headband that it's not as thick as it appears in the pictures. I can't even add my own padding to the stock headband because it gets compressed into a solid mass and is just as bad as the super tight stretching. It's disappointing. I can't recommend this product because it's currently advertised.

👤I tried the package for a full day. Installation is easy. I will have to see for myself if the material is elastic and hard enough to hold for a long time. If my impression changes in the future, I will update. My suggestion to the seller is to make the whole cover 2 cm longer so that it covers more of the headphones. If the buttons are inside, it will be more elegant. I am a pro- user. I'll be happy to purchase more and recommend it to my colleagues if these suggestions are actually done. There is a I highly recommend it for most AudioTechnica headphones. I have never tried it on another, so I don't know.

5. Universal Replacement Protector Compatible Headphones

Universal Replacement Protector Compatible Headphones

The package has a headband cover. The headband cover is compatible with most brand size headphones. Protect your headphones from dirt and sweat. A smooth surface and comfortable touch can be provided by high quality durable material. Excellent match, follows the shape perfectly. It's easy to install and use the durable zip closing. The package includes a headband cover for headphones.

Brand: Txesign

👤I'm not sure if this is working or not. My new beats pros hurt my head, and I bought this to make them more comfortable to wear for long periods as I wear them sometimes for up to 12 hours a day between being online for work and school, and more often than not they still hurt. It doesn't feel like there's a lot of padding on this when it's on my head, so I'm still having some problems I have been taking to wearing a beanie or scarf instead of this on my beats. There are other ones that have more padding and will be more comfortable. If you have beats pros where you have to close them to turn them off this can be awkward.

👤I ran into a good sale price for a set of Rosewill ANC headphones. The cans have 40mm drives, a modular 3.5mm audio input, and can be switched on/off. There is a small loop in the middle of the protector that allows one to hang headphones on a hook. There is a The integrated headband cover on this set is one of those PU 'leather' shaped things that look nice, take little space when carried portable, but they press harder against your head than most of the wider flat-shaped bands. The headband is made of smooth PU leather. I was amazed by the quality of the headband protectors I received. The headband is well sewn together, stretchy to some extent, and the protectors are 1.5 inches wide in the padded area, so they stay on the headband securely. There is an anti-slip padding on the bottom of the protector. This part goes against you. It feels soft and prevents your headphones from twisting. There is a This cover enhances and improves my headphones. It seems to fit more headphones than the description suggests. The described item will fit well if the set comes with an 1.0" wide headband.

👤I had a pair of Koss headphones that I used to practice my guitar. I ended up with black particles in my hair every time I did this. I was looking for something to cover the headphones. There are a lot of these out there, but not for Koss. Most of the ones I found were too long. I decided to take a chance on them after finding them. These were correct, as Goldilocks would say. I really like them. They went on without a hitch, they feel nice, and I like the color. I'm only wearing these in the room where I play the guitar and they don't matter what color they are. I don't think they look bad. The Koss like these because they are longer on the underside and shorter on the top. They don't get in the way of folding or adjusting the headphones. I would recommend them to anyone. They are a good product at a good price. They solved my problem. You will not regret buying them.

👤I have headphones that are too big for my head and I wanted to add padding to them. This item doesn't have foam padding. It has a strip of thick fabric that only provides a small amount of padding. It seems like a nice product, but I bought it because I need actual padding, which this does not provide.

6. Replacement Headband Compatible Technica Headphones

Replacement Headband Compatible Technica Headphones

The installation of this headband cushion is very easy. Don't remove the headband. Headphone Replacement Headband cover can be used to protect your headband from being scratched. The package has a headband cover. The replacement headband cover is compatible with the ATH M50X. M40 M30X M20X headphones. The cover is not made by Original Brand Inc.

Brand: Ltyivabhttw

👤It does provide some protection against scratches. It looks tacky if the length isn't enough to cover the entire headband. It was designed poorly. They didn't account for the fact that the band's interior is a shorter distance from the outside of the band. The attached image shows that the headband is in the center when you wrap it around it. The images in the promo were heat-treated in a way that made the issue less apparent. The padding is very soft.

👤The stock headband on my Audio Technica ATH-M50x headphones is terrible. It's hard to tell what a color will look like online, so I'm uploading some comparison pics. I have a limited edition blue/ copper color. The brown color of my headband is much darker than my stock one, but still looks good and matches my replacement ear pads. This is not hard to get on, but requires a bit of stretching and experimentation. I wish the zip up was locked when it was fully open. It would give it a cleaner look, and prevent it from opening up over time. I'm not sure if this will happen. There is a These are an easy option for a headband cover. I wouldn't hesitate to get one of these again in the future if I need one, but I'm not sure if this stands out over other options.

👤The headband padding on my ATH-M50s was cracking and peeling after many years of use. It was like having black hair. I didn't want to buy a new pair of cans because they were cheap and there was nothing wrong with them. I had a headband wrapped in gaff tape for the last year or so, but thought this cover might be a better option. The headband is a little harder to wear because of the tight fit, but it fits well and looks great. I notice that it isn't comfortable on my head after wearing it for a while. I have a sensitive head and get headaches when wearing a baseball hat, so I might not be the best test subject. My suggestion is to make the neoprene bulkier and more padded so that it continues to be more comfortable. It's still a cheap fix for the flaky-foam problem with old headphones.

👤I kept the item because it did the job. There is a The headband of my ATH-M50x headphones was starting to crack after many years of use. I wanted to cover that so I don't get a bad reaction when I wear it, have it look a little better, and if it makes it more comfortable. It does all that, but for $13 it's a cheap fix. There is a The first thing that comes to mind is that the fit is short and there is some plastic on both sides. I would have liked it to be another 1/2 longer. Getting it to be completely centered messes with my OCD. The width is very tight to put on but it's a good thing. It is very snug. I don't like the idea of the pull hanging off the top, but it doesn't affect anything other than looks. I would like the entire length of the zipper to have a fabric fold over it to hide it. There was a fabric folding in the center after installation. This makes me sad. It has gotten smaller with use, but it still looks ugly to me. I wouldn't know it was there while I wore it, but it doesn't make it any less comfortable. This doesn't make the headset any more comfortable for me. There is a Most of my complaints are aesthetic, so I rate them fairly well. I think the design could be improved, but for a low cost it is a great solution to extend the life of your cans.

7. Headphone Headband Cushion Replacement Sennheiser

Headphone Headband Cushion Replacement Sennheiser

Replacement headphones for the HD580/HD600/HD650. It is high elasticity, durable and soft. It's possible to make a replacement for your beloved headphones. It is made of high quality foam. Please note that it is not included in the note. The approach is 7.24 x 0.91 x 0.55.

Brand: Jzliner

👤I bought a used pair of 650s a few years ago and decided to get a new one because the headband was losing its shape. These were less expensive than the genuine ones, so I went with them. I was worried I would have to use double sided tape to attach them, but to my surprise, the headband that comes with the HD650 does not, so I am not sure if this applies to other models too. You need to remove the tabs from the old headband and say 'Made in Ireland'. The headband's base was the same as the one I was wearing, so I was able to slide it in and pop the tab back on. I've never felt a new genuine Sennheiser pad, so I can't compare the comfort to this, however it is a little bit firm. I'm not sure if that's just because I'm not used to it or it needs to be broken in, but it feels fine to me.

👤I got this along with some new ear cups to completely refresh my headphones. After 15 years of use, my original foam headband piece was flattened. The replacement band fit perfectly and restored the headphones to their original level of comfort. It was almost a shocking change as I no longer have the headband sitting on my head. Installation was easy. It wasn't easy either. If you're replacing the foam ear cups at the same time, I would recommend pulling out the old ones first so that you have more room to work on the headband. Not a problem if you don't. It will work better. To remove the old headband, you have to pop out the two tabs at the bottom of the headband that say Made In Ireland. They can be pried out with a tool. It takes a bit more force to pop them out than I was used to. I got them out without breaking anything. When you pop them out, you don't want to shoot them across the room. The old band can be pulled out once the tabs are out. You can see that it's sitting in two grooves on the headband part. The headband needs to slide into those grooves. It's not easy to get it all the way in there, but you can do it with a bit of pushing and pulling. You'll need to slip the screwdriver blade under the new band to get over the hump because there's a lever in the way. It should be easy to get the rest of the way once you do that. I thought the extra part at the end of the headband would sit under the tabs, but that's not the case. The headband is long enough to just touch the tabs, but not under them. You can pop the two tabs back in once the new headband is slid all the way in. The new foam headband will be much bigger than my old one, so you'll have to expand the headphones a bunch of stops.

8. Defean M30 M50X M50S M40X

Defean M30 M50X M50S M40X

Quality,Worry-Free Service, is improved. They made the headband elastic to fit most head sizes and used a thin fabric that feels cool on the skin. If the sleeping headband phones you received are malfunctioning, please let them know so they can give you a free replacement or a refund. Mistakes happen. They've got you covered. They make sure you have complete peace of mind when shopping for ear pads. They will make a full refund if the earpad doesn't fit. The installation video guide can be found in Figure 7. They can help you. You will get a piece of headband.

Brand: Defean

👤The comfort of my headphones was improved. There was no padding on the headband. The sleeve is perfect for padding. I cut a strip from scrap memory foam to fit. This stretchy sleeve can add about a quarter of a inch of foam to my headphones. I slipped it in and went. I tried adding padding to my m40x's 3 different ways, but this is the best method.

👤The headband on my ATH-M50s wore out within the first few months of use, and I had a pair for a few years. I had to replace them with ATH-M50xbt headphones, which are the same but wireless. I picked this up because it looked like it would fit my needs, I wanted to protect them from wear and abrasion. It was easy to put these on, and they've held up well. I was initially concerned about my hair but it wasn't a problem. It works really well and looks clean and professionally made, but would have liked a thin extra strip over the zip to guard from hair snags.

👤I had my old ATH-M50 headphones replaced with plush memory foam ones which are better all around, but the ear cups lasted only 6 months. The faux leather on the top band has been desintegrating for a while now, and it can really bring you down if you lose the comfort. The solid black won't look as gross as white will if it's wrapped up with this protector. It does the job, it doesn't feel cheap, and will probably last until your headphones die. Why sound quality is an option but not for sound boys?

👤A few years ago, I received a pair of Turtle Beach Ear Force Tango cans as a gift. The sound quality was always good. They were garbage by every conceivable metric. The headband was designed for someone with a watermelon for a head, the battery life was insufficient for long gaming sessions, and the 10 audio preset that you could cycle through were confusingly numbered. The battery was low every 45 seconds. They still looked cool despite all that. I set them up as a neat decoration after giving up on using them. Until now. There is a We recently got an awesome new smart tv from a brand new company, and for some reason, out of all devices, this particular high-end 4K tv from 8 years later, just so happens to pair perfectly with these headphones. After many years of being useless due to issues with PC, PS4, Xbox consoles, various TVs, and basically everything else under the sun... The receiver for these Tangos is plug-and-play and can be connected to the TV via the original optical cable. The audio quality is higher and the connection is seamless. There is a Turtle Beach had one last card. The leather-like vinyl that they used for the Tango was called Absoulute SHIT. One of the ear cups broke in my hands and the headband was torn up, just from normal seasonal temperature changes alone. I was not to be easily discouraged. I was determined to not let these things go to waste. This sleeve and ear pads are suitable for large over the ear headphones. I had to add a bit of foam to counteract the previously mentioned gap as it was difficult to install them both. I was able to take full advantage of these headphones after I prevailed. For the first time, they are actually comfortable. I will be getting the Earpads again at some point for my Steelseries Arctis 5, as they are the best that I've ever used, and they are about the same size. I highly recommend this sleeve to anyone who needs to repair a headband on their headset that they want to save for later in life.

9. Geekria Headband Logitech Headphones Replacement

Geekria Headband Logitech Headphones Replacement

The headband pads are made of mesh fabric. Give your headset a new accessory. It should be a brand new look. Product dimensions are 6.14 x 0.86 inches. The package has a headphone headband cushion.

Brand: Geekria

👤It works great on the headband. You can hold it in place with the help of a glue. The band is the right size. It doesn't seem odd with my pads. It looks like a lightweight headset. The ModMic is attached to the side. The parts express band fits me even though the cushion takes up a lot of space. Those with large heads may not be as lucky. I am a size 7.5. There is a Since I shave my head, the cushion is needed. Even when moving my head, the mic is still stable. I like this setup. I plan to buy an old headset and replace the plastic attachment mechanism for the headband. I'll cover it with leather.

👤It doesn't fit the G35 despite being the correct size and shape. Why? The back is not in the right position. There are two rows skewed to one side. That means that one side of the pad doesn't fix the headphones, causing them to pop out of place. Very, very dumb.

👤I've been using the G930 for at least a couple of years for everything from gaming to audio calls for work. The daily use of the product caused wear and tear, so I was glad to see I could extend the life of the product by replacing the battery and cushions. The headband that goes across the top of the head has a little more cushion than the original one. I learned how to install it. There are no instructions with the product. If you want to do a step-by-step, you can search for videos, but the bottom line is to pop one end of the old cushion out with a small screw driver. It's held in place by just a rim of hard plastic, so if you pull back on one end and get a small phillips under the plastic edge, you can peel it out. It's the opposite of installing. Put the two corners of one end into the slot, then tuck the remaining edges under the headphone slot until it pops in. I had a G930 that was as good as new for a few dollars, with this headband, a couple of new ear pads and a fresh battery.

👤It does its job. My old leather ones were replaced. The ear cups should be the same color.

👤It works for my G930. Don't listen to the support forum where they say it's impossible to replace it. You can slide out the old cushion with a flathead screwdriver if you pop out one of the retaining clips. Once the cushion is replaced, the clip pops back in. It seems like it is the same calibur as when it was new.

👤Installation took about 5 minutes and I took the old headband off. I think comfort is fine.

👤It was better than the original.

👤This one was easy to replace and looks great.

👤It wasn't the right size as it didn't fit. I'm not sure if they do in different sizes, or if they sent a wrong item.

10. Headband Replacement Protector Installation Headphones

Headband Replacement Protector Installation Headphones

It is comparable. Only the JARMOR headband is compatible with the Kraken V2 and the Kraken Pro V2 headphones. Not compatible with the Kraken V1! Easy installation. It's easy to install and use. Protect your headband from dirt and sweat. The high quality material is made of soft neoprene. The replacement headband has a smooth surface. Each head band is thoroughly inspected for defects. Money back guarantee for 180 days.

Brand: Jarmor

👤This is a great way to protect the headband of the headphones. I wish I had known about this product before it happened to my headband. I believe that if this was wrapped around the headband from the beginning, it would prevent it from peeling. Oh well. This cover restores the look of my headphones. There is a The headband cover is comfortable. I prefer a snug headband over a baggy one. I think my purchase will last for a long time.

👤I use a Sony noise cancelling headset a lot. The band across the top is narrow and not comfortable to me. I can wear the headband cover for longer because it helps to cushion and widen the band. Quality and price are both good. I recommend it.

👤If the headband padding is falling apart, this will help replace it with a generic cover. It doesn't have any padding. Adding your own foam is required for additional comfort. Will help extend the life of old headsets.

👤My daughter borrowed my headphones and they peeled! The cover stops the plastic from getting rid of the outer layer. It helps to find the headphones with a green color. Would buy again.

👤After the headband padding started cracking, I kept my headset alive. It is more comfortable now than it was before.

👤I tried to install it but it broke. It looked like it was used as well as the packaging. The color was very faded and looked like it was sitting in the sun for a while. I do not recommend.

👤The pictures are very misleading and this should cost 3 dollars.

👤It's too expensive for a piece of spandex-like fabric. It was bulging on the curve. The crease on the center is what the seller folded it into.

👤It was great to be able to buy replacement cups.

11. Defean Replacement Compatible Sennheiser Headphone

Defean Replacement Compatible Sennheiser Headphone

All defean are produced under strict quality inspection and come with a 12-Month worry-free warranty. lifetime technical support. If there are any issues with your purchase, please contact them for replacement or refunds. The standard size is 60x20x15mm. You will receive a headband.

Brand: Defean


What is the best product for headphone band padding?

Headphone band padding products from Scr. In this article about headphone band padding you can see why people choose the product. Geekria and Geekria are also good brands to look for when you are finding headphone band padding.

What are the best brands for headphone band padding?

Scr, Geekria and Geekria are some of the best brands that chosen by people for headphone band padding. Find the detail in this article. G Gvoears, Txesign and Ltyivabhttw are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to