Best Headphone Band Replacement

Band 10 Aug 2022 10+ Comments Open

1. Replacement Headphone Audio Technica Panasonice Installation

Replacement Headphone Audio Technica Panasonice Installation

The package includes a headband. Most of the big-sized headphones are compatible. Quality materials and design, made of high-quality knitted fabric. Improve the comfort of headphones. It is easy to install a headband without tools. It can be washed by hand or machine. The headband cover for the headset can wrap the headphones beam. The package contents are listed. A headband cushion. The alcohol pad is x2.

Brand: G Gvoears

👤The Corsair Gaming H2100 headset still works great, but over the years the leather covering on the headband had started to chip, so I didn't want to use them anymore. I was covered in black particles when I put them on. I ordered this to fix the problem, and it did. I took a toothbrush to the original headband and used a cover to cover everything. It was a tight fit, but works well. It looks good, but it's not as comfortable on the top of my head as the original headband is, but it's not bad. I'm no longer covered in black.

👤The cushion on my headset is terrible. This is more of a covering than a cushion. This will hide the scratches or cracks on your headset.

👤I was looking for a quick and easy solution to repair my Audio Technica A50s, and this truly delivered for something that does not require sewing. There is a The material is stretchy and easy to install. The headband cover was cut to length and tucked under the edge clips for a clean look, but I did not do it myself. The color of the clasps is something I don't like. The cover still looks good, even though I wish they were black. I like cloth over leather because it's easy to clean. The cloth ear cups I got have given my headphones a new lease on life. If I decide to add padding to my headphones headband, I might buy this cover again. There is a This is a quality product that you will not regret buying.

👤This thing is a simple cover over the headband. If it fit well, there are bumps on it where the fabric isn't sitting right, and it's digging into my head. It's making my head hurt after about a month of use.

👤The headband cover is easy to use. The headband overhangs the end of the plastic headband and is too long for M50, so it's the main challenge. It's not noticeable when I wear the headphones. It might be a deal breaker if you are a visual perfectionist. They have been great. It's difficult to make a product work.

👤This adds no cushion at all. I have dish rags in my kitchen sink that would provide more padding. It's a cosmetic upgrade. I own an Audio Technica -M50x. The product has to be stretched so much to get around the headband that it's not as thick as it appears in the pictures. I can't even add my own padding to the stock headband because it gets compressed into a solid mass and is just as bad as the super tight stretching. It's disappointing. I can't recommend this product because it's currently advertised.

👤I tried the package for a full day. Installation is easy. I will have to see for myself if the material is elastic and hard enough to hold for a long time. If my impression changes in the future, I will update. My suggestion to the seller is to make the whole cover 2 cm longer so that it covers more of the headphones. If the buttons are inside, it will be more elegant. I am a pro- user. I'll be happy to purchase more and recommend it to my colleagues if these suggestions are actually done. There is a I highly recommend it for most AudioTechnica headphones. I have never tried it on another, so I don't know.

2. Replacement QuietComfort QC35 II Headphones

Replacement QuietComfort QC35 II Headphones

The cover is not made by Original Brand Inc. Make your QC35/QC35ii great again! The QC35 ear pads and headband have seen better days. Don't let your $350 investment go to waste. These ear pads and headband pads are here to help you get back to jamming to your beats. When your headband wears out you will really feel the pain, but old worn out ear pads can make you uncomfortable. The ear pads and headband kit uses soft high-density foam and smooth leather that will fit your ears and head for personalized long- lasting comfort. Get lost in the music again if you save your headphones. Replacing the QC35 headband is a priority, and the performance you want is the new QC35 ear pads. The thicker rim of the replacement pads reduces sound leakage and provides a more secure fit. Their seam stitching increases the longevity of your headphones. Installation is easy, your headphones will be feeling new in no time. The step-by-step video guides will show you how to install the replacement ear pads and headband. You can find the video link on the product insert or the guides on the internet. Search for the words "AHG V3 Headband for QC35 and QC35 II - Installation" You are getting 2 new ear pads, a replacement ear pad, a V3 headband, and a mini screwdriver. All you have to do is provide a pair of scissors and some elbow grease and your headphones will be back in business.

Brand: Accessory House

👤The replacement headband and ear pads package was what I needed, but I would have preferred silver or brown. Maybe next time. I use my QC35s every day for music, hearing protection, and as a quasi-invisibility cloak. This was the first time I had to change my headband because it had become too grungy for professional communications in a real estate environment. I was hesitant to buy this package because the headband is not the same as the original, however, I am entirely pleased with the result. There is a The included literature gave me all the guidance I needed, and I was able to follow along so quickly that my new headband was already in my possession. I was able to discard the screw that became damaged by the screwdriver because I found an extra screw in the packaging. I will probably replace the included screws with the original ones. There is a My Bose QC35s fit better now. I think I will replace these ear pads and headband again before my headphones finally succumb to the ravages of time, and I will probably order this package again, maybe next time in something other than black.

👤The install went well. I watched the video as instructed by the seller. I had a headband issue at the end, but I resolved it. The leather was starting to peel off as I could see. I can feel the headband push on my head when I first put on the Bose headphones, which is a good thing. It is more stiff than the Bose original. I don't feel it anymore after a few seconds. There is a I ran into more trouble with the earpad replacement. I've had a lot of experience with earpad replacements, but never had this much trouble with a new one. The seller's ear pads are too stiff. The ring is under the mounts. The ring is so rigid that it is almost impossible to tuck under the tab when wearing the ear pads. I had to redo the earpad 3 times because the leather started tearing. I think the quality of these earpads are not as good because I have never had a tear on a new earpad. I was able to glue the tear. Things worked out in the end and I now have a new pair of headphones. I don't feel like I'm wearing it at all after wearing the headphones with the seller's replacements.

👤I feel like it does a good job at muffling sound and doesn't interfere with noise canceling, it is as comfortable as the original. I use my Bose QC35 II for up to 16h a day and these replacements have been holding on for over a year and I decided to buy them again. The headphones are easy to install with the tools provided, but be patient with the headband since you need to close it over a curved surface, but the headphones look like new. I sewed them until I got a replacement, but when they start to peel off they might open and expose the foam, so I kept using them.

3. Geekria Headband Replacement Sennheiser Headphones

Geekria Headband Replacement Sennheiser Headphones

The ear pads are made of high quality foam and velour. Give your headset a new accessory. It should be a brand new look. Product dimensions are 5.5 x 1.45 inches (14 x 3.7 cm). The package has a headband cover.

Brand: Geekria

👤I bought this because there's no one left that carries the original 598 headband. There is a I liked the original headband more, but it's probably a little more comfortable than stock. It had cracks. I had to throw it away. The headband's original glue is strong. I tore the pleather a little, but it shouldn't be a big deal with this one covering up the tear. There is a It's a bit shy of complete coverage from edge to edge, but it doesn't bother me since some of the pads on either side don't touch my head.

👤The headband fits across where it would be at. The sides are revealed a little bit. Depending on how much you use these headphones, the cushion might go flat in a little while. 3M is used to make it stick. This is the best replacement piece on the market. There are other headband replacements on Amazon, but they don't fit this one or the other one.

👤I used this on my headphones. The headband pad looked cheap to me. I've been using the replacement for a month. I'm happy with it. It was easy to place and it looks better than the original. I think it's an upgrade.

👤It's easy to install. My set is brand new again. The headband wore out fast. I had done a full repair on them. I bought this when that failed, and it seems like it will last longer than the original.

👤Not original quality. It doesn't matter because it's close. It was good.

👤It was a no-brainer to replace it because it was ripped and came off, it felt good and my headphones looked new again.

👤I bought this to replace my cracked plastic headband. It's easy to install and stays in place so far. I think it's even more comfortable than the original.

👤The replacement headband and new earcups will revive your old HD598s. The headband replacement is pretty straightforward, and the glue seems to last a while. The quality was great for the price.

👤The closest option was too small and too thick for the PC363D.

👤This is a replacement headband pad for my HD598CS. The reviews seemed to suggest it was the best bet. The back of the 3m glue doesn't seem to be sticky around the edges so it looks terrible. I wouldn't recommend it based on my experience.

👤Ich ist das "alte" HD598. I am war das Kopfpolster. Naht. Also, I am interested in that. Ersatz bestellt. Es passt perfekt - so farblich. Ich damit meinem Headset.

👤The glue does not bond well to the replacement pad. Continues to separate from the headband. Will probably buy a better glue. There is a It's a nice pad.

👤I put this band on my HD598 to replace the stock cushion which had almost completely come off in the four years since I started using them. It feels the same as the original. I don't pay attention to the cushion in normal use, but I have no complaints about it.

4. Replacement Headband QC2 QC15 Headphones

Replacement Headband QC2 QC15 Headphones

The package has a headband cover. The full product description and installation video should be read before you start. O-Ugm2RAssU can be searched on you tube. It's necessary to make your own skills are required! They don't think you'll buy this product if you're not compatible with it. It was made with top quality leather. Specialised headband clips are included in the sale. The finished installation photos should be noted. Your phone will look different after installation. There is a package that includes 1 headband, 2 lips and a screwdriver. You will need scissors and a chisel to finish the job. These are not included in the sale.

Brand: Accessory House

👤The original headband cushion was placed onto the headphones during assembly, meaning once you cut it off, there was no way to put a new one on. There is a Don't worry about the zip that you see, this is a great design. If you have good skills, this is an easy replacement that looks great. The headband is comfortable. I tested it on a flight and it was just as comfortable as the original and fit in the case the same way. They have a video on line that you can watch and they also have a screwdriver that is very easy to use. The old headband can be removed with a scissor. The rest of the replacement can be completed with their included screwdriver. If you are familiar with the steps, you should watch their video at least once.

👤At the conclusion of my last international flight, I noticed that the top half of my body was covered in black. After 9 years, the foam of my Bose QC2s had begun to break. It was gross! I ordered replacement earpads on the Bose website. It seems like a major oversight by Bose that they didn't carry a replacement headband. It was only a matter of time before they carried replacement headbands and from three suppliers. I got in touch with Ron of Ron's Electric Sales about which one I should get considering that all three had high ratings, and he suggested that I get the accessory houses and the installation video was located at: I asked Ron if he could install the headphones for me because I didn't want to ruin them. He agreed to document the process with pictures and video and gave me his personal phone number in case I had any concerns. The replacement took only a week between when I sent him the headphones and when I got them back. There is a The quality of his work and replacement headband are both excellent. The plastic replacement clips are slightly different than the original Bose ones, but unless someone is looking really closely, they wouldn't be able to tell that the headband was a replacement. Ron's headband fit perfectly into the clips, with no issues like the ones that people had with Headcase Audios and HeadphoneMates. I was able to compare the material of Bose earpads to the accessory house headband after I got the replacement earpads. They are both made of foam. The Bose earpads are soft and comfortable, but the accessory house foam is just as soft. I am happy that I was able to give my QC2s a new lease on life, as the electronics were still going strong. Ron's service and support are both excellent and the accessory house replacement headband is a high quality solution to the problem. I highly recommend anyone who is in need of a replacement headband to check out accessory house.

👤It was a great fix. I replaced my ear cushions but on a recent trip, I saw black marks on my shirt and headband, and realized that they had deteriorated. The headband is a perfect replacement. There is a The installation video doesn't explain the tip that you should tuck the ends into the new clips. The video doesn't explain it well. I didn't realize that until I tried to put things back together. The "head" ends of the zipper go into the clips. The new clips have a bulge in them. The bulge on each side will not come un-done if the ends are done right.

5. VEVER Replacement Headband Beyerdynamic Headphones

VEVER Replacement Headband Beyerdynamic Headphones

The package has a headband cover. It is high elasticity, durable and soft. Replacement headband for Grado and more. Give your headphones a new lease on life. Product dimensions are 8.15 X 3.74 inches.

Brand: Vever

👤If I had noticed it first, I would have picked a different product. It fits perfectly on my MMX 300. The quality is excellent. The snaps on the end don't go to the corner, and I wish I'd noticed that. I didn't think about it until I put it on, and noticed that the headband corners were Flare up on the headphones. The flare is visible on my first photo. In my second photo, compare the position of the edge snaps between the original headband and the replacement headband. I should have noticed that the snaps are chrome, as compared to my original snaps being black, because it's not a mark against this headband. I'm not going to return it because it's perfect, and it's not like anyone sees me in these, so the flare out isn't a big deal.

👤The problem is that one of the pins on the headband refused to tighten, so it didn't fit on my beyerdynamic dt770 pros. Installation was difficult because it was hard to wrap and close the headband on my headphones. It is difficult to adjust the length of the headphones when the headband gets in the way. Would I buy it again? I needed a replacement for my headband cushion. This product may be a bit hard to adjust, and it may be a bit annoying to install.

👤Product fit perfectly on my cans. I read that one reviewer thought it was too tight and he must have been smoking something good that night. It's a bit better than the stock ones that come on them. This headband holds its own and I have two. The previous owner of the DT880 installed a very large pad of glue that nearly tripled the thickness and it was terrible. I decided to take a chance after learning the shipping cost on an original from Beyerdynamic. I would like to upgrade my 15yr old headband since it has seen some hours. Don't be afraid to try it out on cans. You'll be happy about it.

👤It works perfectly with my BD T1 (2nd Gen). There is a I had to remove the original cover layer that was falling appart and leave black specks of material everywhere. There is a I had to remove the foam cushion from it because it was a bit sticky. There is a It took me 2 minutes to put on the replacement. No tools needed. It fits like a glove. I would recommend it to my friends.

👤I wanted something that was a little softer. I decided to look around because it was getting worn out. There is a This option was very cheap. It's been on my headphones since August and has no quality issues. It hasn't worn out early, hasn't been weird, and it's not uncomfortable at all. It's cheaper than the headband that came with my DT770 Pro's, and it's better. There is a It wouldn't take much to get it on, even though the installation is a little frustrating. I don't think you want it to be loose either. I wouldn't criticize the product for how it is.

6. Replacement Protector Installation QuietComfort Headphones

Replacement Protector Installation QuietComfort Headphones

It is comparable. Only Bose QuietComfort 25 and QuietComfort 35 are compatible with this headband. Not compatible with any other Bose series! Easy installation. It's easy to install and use. Protect your Bose headphones from dirt and sweat. The high quality material is made of soft neoprene. The replacement headband has a smooth surface. Each head band is thoroughly inspected for defects. Money back guarantee for 180 days.

Brand: Jarmor

👤I like the cover. It took more than half an hour to get it on. It was difficult. Maybe I am difficult. It's funny. The cover looks good. Not bad. I wish cover was longer. The feel did not change. That is awesome. You don't know it is on. All in all, nice.

👤The seller tried to get it out as soon as possible. It will slip off if you have very little hair. I was hoping for a better outcome. I bought it for my father.

👤I found this product when my old Bose headphones started to crack. I put this on all my headphones.

👤The product is nice. Does what it is intended to do.

👤Works as described. The leather part of the band was protected by this. It works perfectly on my QC35.

👤It's good for protection, but if you have a case there's really no need. Unless you change the color of your Bose. Which case do not use mightyskins?

👤The top-cover is too small for my headset. I wish it was bigger.

7. Geekria Headband Replacement Sennheiser Headphones

Geekria Headband Replacement Sennheiser Headphones

Product dimensions are 8.15 X 3.74 inches. The headband pads are made of leather. Give your headset a new accessory. It should be a brand new look. Product dimensions are 8.46 x 3.35 inches and color is black. The package has a headband cover.

Brand: Geekria

👤I bought this for my HD6XX. I don't like the stock headband because it causes some pressure pain from the pads not going across the headband. This replacement is very nice. I think the leather, buttons, and memory foam are all sturdy and should last a long time. It is a great value, even if it were to tear. There is a The only thing that was frustrating was getting it on the headphones. I had to stretch the leather so that the buttons would snap. Don't pull it as hard as you can, it will damage it. I formed it and tugged it from both ends. You need to remove the original headband to install this correctly. There are videos on the internet showing you how to remove it. There is a The difference in comfort was obvious. With the upgrade to memory foam over standard foam that Sennheiser uses, the memory foam goes across the entire top of the head. I think this looks better than the stock headband. I also have a ZMF pilot pad on another headphones and find the comfort level similar, despite the small area. The ZMF pilot pad was too large for this headphones, so I was happy to find this product which was designed for the HD series.

👤The fit of this band is worse than the picture shows, and it is misleading in the product description. The band is too large to fit in a small bag. The effort required to button is significant. The button broke during installation. The product is low in craftsmanship. The buttons are not punched through in a straight line. It is made of the same leather as my Geekria earpads, which broke in less than two years. I found that the Vever headband was better in every way. They're both very comfortable.

👤I bought this headband cover for an old pair of noise cancelling travel headphones. The narrow headband is the only thing I don't like about those old headphones. The original pads don't distribute the weight equally across the head. I have headaches at the pressure points on flights. The cover is too long to allow me to fold my headphones for travel, so I trimmed one end and protected the iron with a layer of paper. The results are perfect. I can wear the headphones for a long time without having to worry about headaches. The width of this cover is larger than my headphones headband, so it doesn't look ideal, but it's very comfortable.

👤I bought these for my headphones because they needed more protection. I looked at the list of headphones and found one that would fit my Grado series headphones. The package was a plastic bag and it was the only thing on it. Attaching it by use of snap buttons is straight forward. I tried it on my Grado's and they don't fit. The first snap button closes and the last one does, but none of the others do. I said to myself that if it provides enough cushion it's ok, but if it doesn't it's wrong. My headphones were more uncomfortable because there was barely any foam in there. What a waste.

8. SCR Headband Compatible Replacement Headphones

SCR Headband Compatible Replacement Headphones

The HD280, HD 280 PRO, HMD 280, HMD 280 PRO, HMD280-XQ are compatible with the Sennheiser headphones models. No tools needed for a quick and easy replacement. The material is high quality. The memory foam has a comfortable fit.

Brand: Scr

👤The old headband on my computer needed to be replaced. I took one star off because it is manufactured straight and doesn't have a slight curve like the original did, which causes it to be a little squishy in the middle and for the ends to be lifted up. This is not a big deal. There is a stock headband next to this item. Since this is the only replacement I've been able to find, I would definitely recommend it.

👤I bought these along with a new set of headphones because they were less expensive than the factory-replacement which cost more than half of a new set. I didn't want to spend $50 on padding when my HD280's broke where the ear-cups extended. It's better to replace the whole unit. The price of these pads made it attractive to fix up my old pair and get what I can out of them until they fail. There is a The padding works like the original. It is comfortable. The material that holds the ear pads to the ear cups is a bit thinner and less durable than the other materials. I thought it might be due to hardened plastic, but when I compared it to the ones on my new set, it was not the case. Time will tell how well they will hold up. I won't complain about the price difference. There is a The ear cups have a challenge stretching the plastic over and into the slot. The company has directions. Work it around on a narrow end. Be careful and patient. I had to work it around for a while before the pads were fastened. The comfort is restored after that. There is a The top pad is easy to install. There is a We are very satisfied with the product and price.

👤I'm confused by the reviews. If you don't care about sound quality much, they're a good replacement. Why did they buy HD-280s? There is a I stopped giving them a thumbs up because they're not too much trouble to get on and they're comfortable like the originals. The sound quality is degraded because the internal foam is not as dense. I can hear more noise coming from outside. I'm looking for new headphones after I submit this review because the sound quality is so bad. The pleather feels cheaper and less durable, but we'll see how it holds up. Update- Another star was removed. I kept the new headphones in the mix because they're the same as the ones I bought. They may follow the dodo bird because of this foam replacement. The speaker surface is resting against my ears as the foam collapses. This is not a replacement foam. It's just a resemblance.

👤The headband padding on the old model of HD 280 Pros was very uncomfortable to wear for a few minutes and it was a decade ago. It was difficult to find the original part for this model, but this headband seemed to fit. It took a bit of effort and I'm not sure I lined the fastening completely, but it does fit and doesn't seem to slide around.

9. Defean M30 M50X M50S M40X

Defean M30 M50X M50S M40X

Quality,Worry-Free Service, is improved. They made the headband elastic to fit most head sizes and used a thin fabric that feels cool on the skin. If the sleeping headband phones you received are malfunctioning, please let them know so they can give you a free replacement or a refund. Mistakes happen. They've got you covered. They make sure you have complete peace of mind when shopping for ear pads. They will make a full refund if the earpad doesn't fit. The installation video guide can be found in Figure 7. They can help you. You will get a piece of headband.

Brand: Defean

👤The comfort of my headphones was improved. There was no padding on the headband. The sleeve is perfect for padding. I cut a strip from scrap memory foam to fit. This stretchy sleeve can add about a quarter of a inch of foam to my headphones. I slipped it in and went. I tried adding padding to my m40x's 3 different ways, but this is the best method.

👤The headband on my ATH-M50s wore out within the first few months of use, and I had a pair for a few years. I had to replace them with ATH-M50xbt headphones, which are the same but wireless. I picked this up because it looked like it would fit my needs, I wanted to protect them from wear and abrasion. It was easy to put these on, and they've held up well. I was initially concerned about my hair but it wasn't a problem. It works really well and looks clean and professionally made, but would have liked a thin extra strip over the zip to guard from hair snags.

👤I had my old ATH-M50 headphones replaced with plush memory foam ones which are better all around, but the ear cups lasted only 6 months. The faux leather on the top band has been desintegrating for a while now, and it can really bring you down if you lose the comfort. The solid black won't look as gross as white will if it's wrapped up with this protector. It does the job, it doesn't feel cheap, and will probably last until your headphones die. Why sound quality is an option but not for sound boys?

👤A few years ago, I received a pair of Turtle Beach Ear Force Tango cans as a gift. The sound quality was always good. They were garbage by every conceivable metric. The headband was designed for someone with a watermelon for a head, the battery life was insufficient for long gaming sessions, and the 10 audio preset that you could cycle through were confusingly numbered. The battery was low every 45 seconds. They still looked cool despite all that. I set them up as a neat decoration after giving up on using them. Until now. There is a We recently got an awesome new smart tv from a brand new company, and for some reason, out of all devices, this particular high-end 4K tv from 8 years later, just so happens to pair perfectly with these headphones. After many years of being useless due to issues with PC, PS4, Xbox consoles, various TVs, and basically everything else under the sun... The receiver for these Tangos is plug-and-play and can be connected to the TV via the original optical cable. The audio quality is higher and the connection is seamless. There is a Turtle Beach had one last card. The leather-like vinyl that they used for the Tango was called Absoulute SHIT. One of the ear cups broke in my hands and the headband was torn up, just from normal seasonal temperature changes alone. I was not to be easily discouraged. I was determined to not let these things go to waste. This sleeve and ear pads are suitable for large over the ear headphones. I had to add a bit of foam to counteract the previously mentioned gap as it was difficult to install them both. I was able to take full advantage of these headphones after I prevailed. For the first time, they are actually comfortable. I will be getting the Earpads again at some point for my Steelseries Arctis 5, as they are the best that I've ever used, and they are about the same size. I highly recommend this sleeve to anyone who needs to repair a headband on their headset that they want to save for later in life.

10. Replacement QuietComfort Headphones Protector Installation

Replacement QuietComfort Headphones Protector Installation

There was no tool needed. Zip up in place if you want to fit over the original headband. Don't remove the headband. Can be used to protect your headband. Product dimensions are 6.8 x 3.3 inches and color is black. The package has a headband cover.

Brand: Geekria

👤What a great product. It matches even though it is not an original design. It's easy to install the zip up. There is a loop to hold the tab in place. There is a The product photo shows a top. I like having the zipper facing back so it is not visible from the sides. The elasticity of the neoprene material doesn't bother me at all because the zipper is a bit crooked.

👤I use my headphones when I travel. I noticed the headband was black when I hadn't traveled in over a year. I was thrilled to find an easy solution to the problem because I had already replaced the ear cups. I wanted to keep the old headband. Once you get the zipper seated, it's easy to install this cover. The headphones still fit in the case even after the cover has been installed. The cover is comfortable when the headphones are being used. I made sure to put it on the back side of the headband so that it wouldn't be obvious when you are wearing the headphones.

👤This is not a perfect replacement since it is not the same as the original Bose product, but it does cover up your headband. It is not a deal breaker and I can definitely recommend it. It was difficult for me to line up the track completely so that it wouldn't fall apart, but I was patient and it pulled up. I put the seam toward the back so that it's not visible when wearing the headset. I chose this one because the ends of the product have a finished seam giving it a more polished look.

👤I bought new ear cushions for my Bose headphones and Amazon offered them as an add-on. The headband had not deteriorated as much as the ear cushions, but I figured I'd get this as well. Especially at the low price. It was easy once I figured out a trick, but I have a bit of difficulty getting it on. I started the metal extension over the headphones. I was able to pull the head piece and complete the zipper after I got the zip going. There is no pain because the zip up sits on the top. There are still headphones in the case.

👤I use these as padding for my bare plastic headband. They make the headphones more comfortable to wear. These fit the headband on the Sony. They can be hard to install. You have to get the zip on the small one by threading it correctly and completely at the end. The cover wants to flop open all the time. If you use duct tape or a cable wrap to close the far end, you can keep the two sides of the pull together. The covers have not come undone once they have been put in place. They look like an accessory that was included with the original headphones.

👤I put this on my headphones. I have a small head, and the headphones slid around too much for me. I put a couple layers of packing foam on the bottom side of the headband after purchasing this cover. It had a perfect fit after being clipped onto the headphones. If this hadn't worked, I would have returned the headphones.

11. Linkidea Compatible Headphones Replacement Installation

Linkidea Compatible Headphones Replacement Installation

There was no tool needed. Don't remove the headband. Can be used to protect your headband. The headband cover is compatible with Sony. The dimensions are 7.6" x 4.3" The package has a headband cover.

Brand: Linkidea

👤The headband cover was purchased based on the dimensions stated in the listing. There is a The width of the item I receive is 3.75 inches in the middle and 3 inches on each end. No, where near the stated width at any point. It wouldn't fit on my headphones. The dimensions are close to 7.6 inches as stated in the listing. Hope this information is useful to others. I will have to return it.

👤I bought this after my headband started peeling. It was packaged in a small sealed plastic bag. It was cut perfectly and went on without a hitch. It fits over the old headband and stops where the joints begin. It fits well and doesn't slide around. I think it could have been made more snug so it wouldn't bunch up. The silhouette of the headphones is broken a bit by the bunch up along the zipper. The material feels like plastic and the zipper feels like plastic. The only complaint is how simple of a solution it is and how comfortable it is.

👤I use the Senal SMH-1000 headphones in my sound bag. I replaced the earpads for the sake of comfort, but the original headband was beginning to break. I thought I'd give the SMH-1000 a try. There is a The headband protectors went on like gloves. It was a little bunchy at first, but after tugging it into place and centering it, it fit perfectly. It's nice and comfortable and I don't have to worry about my headband coming off. I'm happy.

👤It works on a pair of audio technica m50s. It has decent comfort. I put a piece of foam under the headband to protect it. It made the headphones more comfortable to wear.

👤I put this on my headphones. I have a small head, and the headphones slid around too much for me. I put a couple layers of packing foam on the bottom side of the headband after purchasing this cover. It had a perfect fit after being clipped onto the headphones. If this hadn't worked, I would have returned the headphones.

👤The headband on my MDR-7506's was starting to wear and this was the perfect protection for it. I don't feel it when I wear the headphones and they are easier to pull off. It feels like it will last a while, the fit is perfect.

👤The headband on my headphones was no longer in working order. I think it's supposed to have a loop to hold the pull, but I didn't have one. It stays put on its own. It was made in China.

👤The solution for a flaming head band is nice, but it can be difficult to open with a bit of tension. There is a It is soft and comfortable once it is in place.

👤The band is moving quickly. It is not well designed for a circular shaped band and there are bumps that affect how the band sits on the head.

Summary

What is the best product for headphone band replacement?

Headphone band replacement products from G Gvoears. In this article about headphone band replacement you can see why people choose the product. Accessory House and Geekria are also good brands to look for when you are finding headphone band replacement.

What are the best brands for headphone band replacement?

G Gvoears, Accessory House and Geekria are some of the best brands that chosen by people for headphone band replacement. Find the detail in this article. Vever, Jarmor and Geekria are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com