There is a 2 year satisfaction guarantee forValuable gift for Christmas, Thanksgiving day, Easter, Birthday, Valentine's day and more. Hook can hold up to 10 pounds. The heaviest headphones weigh about one pound. 3M VHB tape is used to adhere the aluminum material and soft silicone pad. One headphone hanger with 3M VHB tape. mounting on computers, desk and wall is durable.
👤The frame doesn't bend without some force applied to it. The color of the product is great, but it doesn't scratch easily, like some other products that will scratch and ruin the look. Installation is the easiest thing in the world, stick to the spot, good to go. There is a There are pros and cons. My circumstance doesn't allow me to use the provided screws to install the hook. I bought this product because it came with a sticky pad. I have headphones that are not much heavier than the ones I use. The sticky pad didn't stick for long. It may have started peeling away from where it was placed a week before. I thought it might have been a mistake, but it wasn't. It's a very simple fix, I just bought better double sided tape and I haven't had an issue with it after that. I had to go out of my way to make it better, so I had to dock it some stars. That may be useful information for some people. The tape was not very good, but I am happy with the rest of the product. There is a This style of hook is perfect and many prefer it over the above desk ones. If you are able to do that even better, the color doesn't chip away, and the material comes with screws if you are able to do that, I would recommend this product over others. If you plan on using it that way, you should install a better quality double sided tape.
👤I didn't expect the glue to bond to my desk to be welded on. I am either weak or it has its own pull that was reinforced using superglue. It's important to plan where it's going to stay.
👤I put this under my desk with the 3M double sided pads. It is small but works for my G930's. The material is very strong. There is a The best part is that they included small clips. I was able to run the charging cable cleanly underneath my desk. There is a Overall happy. It was a bad deal for the quality.
👤I stuck it too close to where my legs were, and it would occasionally hit me. It sticks very well if it does what it's supposed to. The HyperX Cloud II headset is in place.
👤I can't stand the amount of stuff on my desk. I did not want a headphone rack because it was at risk of being knocked over. The metal is heavy for its purpose and won't bend. The mounting tape did not work. I used the screws that came with it. It was kind of annoyed. I didn't want to put holes in my desk. Overall happy with it.
👤The purpose of it is to serve as a headphone hanger. It is made of aluminum and feels sturdy. The only reason I'm giving it two stars is because it's not as advertised. There are 4 holes in the hook. Two (2) are located in the center of the hook and two (2) are located towards the top of the hook, which has slots to allow sliding the hook onto screws. I don't care if it's not what I ordered, since it does its job and I don't see it under my desk.
Premium quality is made of aluminum metal. 60 days of money back is included in the Headset Holder Warranty. Double Headphones Hanger can hold two headphones at the same time, with a headband width within 2.1inch, such as a gaming headphone, children headphone, and so on. You can charge your smart device without a plug in wall with the 3 Port SmartUSB Charger. It can detect your device and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amps overall. The lights are RGB. The RBG Headphone Stand can display 9 colors changing effects to create an amazing game atmosphere at your preference, that can be selected by pressing a Touch switch. Great gifts for men and women. Fire-resistant and hardened plastic outer shell, build-in premium circuitry and microchip ensure device safety. A multi-protection system protects against overload, short-circuits, over-current and other charging issues. If there is a quality issue with this headphone rack, please do not purchase it.
👤It's a nice idea, but it doesn't live up to the potential. Is a decent job holding on to the desk, not sure if it will take too much weight. The lip at the top is not more than 1/2 inch. There is a flaw in theusb C port It won't register as charging my phone, but it will charge my ear bud case. I didn't return it because of that. The swap for a better power supply didn't help. It doesn't provide enough power to the port. The charging cable on the A port does not generate enough juice to quickly charge my phone. Pressing and holding the button will shut off the light.
👤I am always on the phone. It's helpful to have a place to hang my headset in my desk. There is a I like that I can charge a few devices here. There is a I don't like the fact that there is a circle of light on the front. The light is in motion. If you have this in an area where you sleep, it could keep you awake. The light show could make you sleepy. I'm not sure if it works that way, but I'm trying to see the bright side. I made a new year's resolution to be more positive.
👤There are no options for one color or different modes in the RGB lights. I don't like them but the rest of the things are very well made and I have to give it 5 stars. The hub is nice. I mounted it under my desk because it was strong enough to handle. It's under my desk to hide the mess of wires.
👤If it fell down immediately or within 20 minutes of installation, it wouldn't be possible to hold onto the table and plug in to the wall at the same time. If your space is set up just right, you're good, but other than that, good luck! I felt like the item was false in the description.
👤The convenience factor is great. The attachment screw is set up to be too close to the brackets, which is a manufacturing defect. Result: The cheap plastic cap on the end of the screw makes the device slip off with the smallest of movements, like hanging a set of headphones.
👤I own a few pairs of headphones. A mic and tooth for my phone. I think they fit on my desk. The unit is held sturdy by the clamps. It is handy to have both the 2 and 1 charging ports. The light is funky. It would be nice to have the option of turning it off, but I can set it to whatever color I want or let it spin through the various colors. I am very happy with the purchase. It gets my headphones off my desk. I highly recommend it.
👤It's a great addition to my set up and helps me keep my headphones organized. I love that the lights can be turned off and that the extra outlets are clutch. I have been using it for almost a month and it has never moved. The plastic feels cheap but I can't complain about the price.
Universal design - hold your headphones and controllers in one place. It applies to a bag, umbrella, backpacks, keys, cables, etc. To accommodate accessories, please adjust the little arms of the hanger. 1 Hanger Holds 2 The dual arms of the headphone hanger can hold two headsets at the same time, keeping your headphones organized and ready to use. It is compatible with all headphones with their headbands within 1.37inch. The headset hanger is widely used under the glass, wooden or metal desk, table, shelf, cabinet in the home, office, dorm, cyber cafe and other scenarios. It could also be used to hang other items, such as purses, shopping bags, umbrellas, etc. A neater environment will be created with this hook. The design is user-friendly. The mount is lightweight and sturdy with premium aluminum, so that it won't break even if you hold the heaviest headphones. The raised tips on your headsets prevent them from falling. When you need to replace something in unforeseen circumstances, you will be able to do it with extra glue. Two mounting methods. The headset stand can be mounted without causing damage to the desktop surface, and it can hold up to 4.4 lbs. With screws, the headset hook could be installed for more firmness. Choose the installation method that is right for you. You can get a refund within 60 days or a free replacement within 12 months if you have non-human reasons. You can contact them via Amazon Messages if you have any questions.
👤This double-hook headphones holder does exactly what it is supposed to do. It holds two pairs of headphones side by side. The double-sided hook makes it easy to store and remove your headphones from underneath a desk or shelf. I gave the Adhesion category a 4-star rating, since I have only been using it for a week and it has a tight seal. I am confident that it will be long- lasting since it is made with a 3M adhesive and includes a replacement strip. There is a It is recommended that you allow 24 hours for the glue to seal completely before hanging your headphones. This is part of the instructions. I purchased this one because of its design quality and price, and I am very satisfied. I hope this insight helps you make a buying decision, as I am not an employee of this seller or a representative of this industry. All the best!
👤I couldn't find a way to hang the heat gun on the side of my crafting table after I bought it. Many of the headphone hangers are plastic or foam, and I thought they would be perfect. This one is made of metal, not plastic or foam. It's the perfect size to fit under the edge of my crafting table for my heat gun. The gun is held with the nozzle up so that the heat won't affect the motor. There is a This comes with a glue to stick it on, but also a couple of screws to put it in my table. This isn't designed for this purpose, but it fills the bill perfectly.
👤I wanted to hang my headphones under my desk. The desk has a smooth bottom that should accept the included glue, but I decided to use the included screws just in case. It was difficult to install the screws due to the design of the headphone hanger. Since a screwdriver cannot be driven at a straight angle, the screws need to be put in at an angle. I predrilled the holes for the screws, but since the screw goes in at an angle, it sheared the screw off. I was disappointed that the screw sheared so easily, and the design made it nearly impossible to install the screws, because I was using a hand screwdriver to drive the screw. It is a good material and slightly smaller than I thought.
👤I like that it's double sided and works well for my purposes. It will be too narrow for some headphones. I found the measurement listed to be accurate. I only use this to store one pair of headphones and the other hook for hanging cables that aren't in use. I would like to secure it with the screws provided, but unfortunately the way it's designed makes it difficult to approach from an angle. I'm not sure how you could get the screw all the way in. You would need to drill a hole before you install the glue, and poke holes through it, so that's something to keep in mind. Unless you plan to put something heavier on this, it's not necessary. I wouldn't try to use the screws for something like a bag hook because they are small and mount from two corners.
Customer service is great. Give it a try. You can return it within a month if you don't like it. They will send you a new one if it is faulty within a year. Universal under design allows for a near universal fit on most desks by attaching a thin, narrow, and thick piece of metal to them. It is easy to remove the Spring Clamp. The audible headphone arm swings underneath your desk for discreet and non-intrusive storage and swings back out for easy access. BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Soft rubber pads are located on both ends to protect your desk or table from damage. The under desk mount is convenient for storing. Easy installation of a springed C Clamp.
👤We needed a better solution to keep our headphones from breaking and this was our answer, it's very sturdy and feels very well made, it's even better if you have an xbox one controller, it's even more perfect. My purse is probably around 10 lbs. I'll probably order more for myself and gifts in the future. Highly recommended.
👤The hook portion can bend if you put a lot of weight on it and it is very cheap. There is a The head doesn't lock up. The clip is not tight enough to prevent desk steps that are less than a quarter of an inch from moving. You can get a Brainwavz Hengja Hanger for the same price that has better construction quality. I would've gotten a second one, but I got this instead when the page from my old order suddenly said out of stock and started directly to a screen protectors. I wouldn't buy it again. Cheap, poor construction, plastic bends, top sticks up a lot. A bad product.
👤It's easy to put my headphones out of the way. I didn't want one where you have to use glue or screws. You don't need a heavy duty one if you have light headphones. The mount has a sufficient amount of space. The desk is protected by the padded clamps. The mount has a hook so you don't lose your headphones. You can choose which direction you want to hang your headphones. The cord clip is nice, but it's stiff, so I just wrap it around the hook and grab my headphones when I need them.
👤This thing is great. I was embarrassed that I didn't think of getting this a long time ago, but I did not know it existed. Maybe it didn't. I am a recording artist and I use expensive headphones. They were not taken very well care of in the past, as they would flop around on various surfaces. The device is easy to set up and I like that the hook can be changed to hang things or not. I think it's a good deal so that I can get another one for my other cans. I recommend this to anyone who wants to protect their investment.
👤It was easy to put in place. I got this because I was sick of my headphones laying in random places. The hook is neatly underneath. The picture doesn't show it, but there is a small loop for a cord to go through so I leave my charging chord handing from there so all my cords are close together and easy to manage. You can put the headphones on the hook and swing them out of the way under your desk. I put one on the side table for my headphones.
👤I didn't expect to write a review on this. I thought I knew what I was getting. This is a cheap, easy to scratch plastic. The cable clip would be better not there. The only. The mechanism for twisting the hook into different positions is a nice thing about this. You only need to rotation from 90 degrees and 180 degrees. The hook is pretty loose and you can position it anywhere from 0 to 180. I would have given it a pass, but the junk quality means it should be a lot cheaper than other METAL items. It would be a good deal at five bucks, since I got it for twelve ninety nine. If you don't know better, maybe eight. No way in over ten. I'll probably keep it because it's not worth it with the Pandemic. It will have to do.
The dual Headphones Hanger under the desk can hold two headphones at the same time, with a headband width within 2.1inch. You can charge your smart device without a plug in wall with the 5 port smartusbcharging unit. It can detect your device and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amps overall. You need to use different ways to hold your under desk, so come with 2 screws and 3M VHB tape. Please clean and dry the surface of the desk and stand before you install it. Wait 24 hours before using. 6 cable management hooks for keeping cables neat and organized are included in the cable organizers. Saving space for your phone and headsets is helped by it. Can hold two sets of headphones. The arms are not the same. Their promise is to make sure you are 100% satisfied with your purchase of their products. They will give you lifetime warranty service if you have any questions. You are both a customer and a friend.
👤This is very nicely placed under my desk. I don't use screws because the tape looks strong. It supports my headphones. There is a The side wings have a notch on them. It saves space and I don't have to have a headphone holder. There isn't a way to turn off the blue lights. Overall 5 stars.
👤I have a tv stand above my couch that makes it hard to charge my phones and controllers. The kit does a great job of charging my equipment. I used screws instead of tape and it was easy to install.
👤An amazing find. I used 3m double sided tape. It does come with some tools to set it up, but mine didn't damage it. I like it. If you're looking for a way to charge your items without having to use an outlet, then buy it. I wire managed it, but it is not a brick charging point. A long cord is attached to the item.
👤I bought this stand to keep my headset out of sight. I used the screws that came with it to attach it to my desk, so I can't comment on the strength of the 3M tape. It's made of plastic and doesn't feel weak, but I'm afraid to hang up my headsets. It comes with a screwdriver, brackets to help guide the power wire in place under the desk, and double sided tape for the brackets. The built in ports are nice, but it would have been nicer to have a few more ports.
👤I like this thing. It keeps my things out of my way all the time. Everyone always needs moreusbs at your desk. The screw brackets and sticky tape are pretty good. I used double sided tape because I was skeptical if it would stick in the middle of the night. It seems very sturdy for the price. Would recommend. Everyone with a computer needs one of these.
👤I used to have a small extension cord with 3usb drives that I used to charge my phone, headphones, watch, and other things from, but I was short of the 3.0 rapid charge. The device solved my issues and gave me a place to hang my headset. The wings are barely big enough to fit the headset, and they seem a little flimsy.
👤The unit is described on Amazon. I was surprised that the box was not sealed when I received it, as I thought it had to be. Some of the 3M tape was bent up, but still applied. Time will be the most important. I plan to take my devices out of use after being charged. Rather be safe. There is a My desk is cleaner because I have a place to put my noise canceling and headsets. God bless!
👤The "wings" that hold a headset aren't long enough to hang anything from, and it doesn't attach well to my power strip. Does not help with cable management. Disappointed in the work.
Two preset heights give you maximum control over the level of your computer screen to improve posture and prevent neck and back pain. There is a notice. It is not possible to use it for painting a wall. If you paste to the wall, it will fall down. Make sure the surface is smooth, dry and oilless, and hang your headphones after 24 hours to make sure the hanger is firmly stuck. 500g is the max total weight. The headset holder with a magnet can be used when it is not in use. The arm of your headphones is covered with a soft rubber pad to protect it from slipping and scratching. The headphone hook has a strong sticky design, which can be applied to any smooth and clean surface. Hold your earphone in a firm position. Remove the sticker and stick it under your desk. It's great for hanging cables, hats and other gadgets to the kitchen counter, bookshelf, studio and company. A multi-purpose hook. The under desk mount is compatible with almost all wired and wireless headphones.
👤Does what it says it does. No issues.
👤I like the design. It's easy to hide and doesn't get in the way. It flips closed when you don't use it for headphones. It was easy to install, just remove the paper from the device and stick it on the spot you want it. The second adhesive pad they sent will help if The adhesive ever wears out. Overall, a great purchase, it does what I wanted it to do.
The dual Headphones Hanger under the desk can hold two headphones at the same time, with a headband width within 2.1inch. The rotating neck of the headphone arm allows it to be used as a storage option for heavy headphones. For a near universal fit on most desks, the Clamp can be as narrow as 5mm and as thick as 50mm. It is easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or table from damage. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.
👤I transitioned from a regular desk to a standing desk and I love it! There is a I bought the Anti Fatigue Bar to stand on so I can work on a stand up desk. I bought a dual stand under my desk so I can hang my headphones when not in use. It's very easy to install on a desk and it's very sturdy, but I like that it rotates so I can tuck it inside the desk rather than have it stick out. Absolutely nothing! There is a 5 out of 5 stars! If you need to hang stuff for storage, such as headphones, book bag, and anti fatigue bar, I highly recommend this. It's strong enough to hold anything. There is a Hope this was useful. If it was, please click on the button below. Thank you!
👤The design is subtle and easy to install, and thepadded hooks can be adjusted to your desk. There is a If you have a thicker desk, you won't have much clearance for your headphones. This was used for our headset. The hooks aren't adjusted to go lower than the C clamp, so it barely fits under the desk. I thought it would be bigger and longer because of the reviews. Would not be possible to fit 4 quality headphones on here. I thought my headphones wouldn't be a problem at my desk. It works. It works and is cheap, but not my favorite for the purpose I bought it for.
👤Excellent headphone holder! I use this to hang my headphones above my headphones amplifier at the back of my desk. There is a The steel is very strong. It is very easy to install. I like the way the hanger rotates. I will probably get another pair of headphones. This is the best I have found before. I bought another one to see which one I liked the best. The other is made with plastic and takes up more space than the other. I'm sending it back. This is the keeper!
👤I use it to hold two briefcases. The Bag of Holding is from ThinkGeek and the large briefcase is from Saddleback Leather. Hanging them from the device keeps them out of the way of the robot. It looks better than any other method of storage I have tried.
👤I wanted to buy a single hook for my headset. I found a dual headphone stand and extra wide brackets. I don't have enough room on my desk to hang this hook. I need something to hang from the shelf. It is about 2 inches thick. The hook is perfect on the edge. I use the extra long arm to throw my headset on there. I know where to find my headsets.
👤I was worried that this might not hold up because my desk has a metal tube on the bottom side, and I needed something that was strong enough to hold two pairs of headphones. I've had no issues. The item I received is not the same as the one pictured. There are two small tunnels on the plane of the headphone-holding areas near the edges that you can cut out if you want to get a cable grip. It's too wide to hold regular 3.5mm cords, so maybe it would hold woven cords?
If you care about compatibility, style and quality, this gaming accessories is the best choice. It's a great gift for your kids, gaming friends, boyfriends, etc. All in one design, under-desk headphones stand, 3usb charging hub and 4A-20W. Can hold two sets of headphones and keep your headphones out of sight. 3 Port SmartUSB Charger:Detects your device automatically to deliver its fastest possible charge speed up to 2.4 Amps per port or 4 Amps overall. TheSafe Guard is a fire-resistant and hardened plastic outer shell that is built-in premium circuitry and a chip that ensures device safety. Quality Gourmet provides a 90-Day Money Back Guarantee and a 24 month warranty that will ensure you a hassle-free purchasing experience. If there is a quality issue with this headphone rack, please contact them.
👤Great idea and concept. Didn't find anything else like this. The included wire management tie down clips were helpful. The wire holding cutouts on the parts are very nice. I like the monocolor of the grey outputs that came with mine. It takes a bit to take off with 3M VHB tape. The power line runs below the unit, which would make wire management easier. You can see what I mean by looking at my photo. If the cable ran through the back, it would have been a cleaner look. The power cord is a tad short, as many other users pointed out. It fit my setup well, but I wish it was longer. Great product, all in all. This is definitely an improvement over the previous ones, as it was from a regular under the desk headphones. Would it be interesting if they had a version of this that was not powered so you could connect it to a computer? It's helpful for people with headphones that have ausb type.
👤This is a review for something. Skip the other headphones. You will get more bang for your buck with this. Way better than those overpriced headphones. Get this. You get a better quality hanger and also a charging port for your devices. The price is almost unbelievable when you consider that you don't get cable channels or a portable charging device. What I like. There are two headphone hangers. There is a There are cable channels for earphones. There are threeusb DC chargers! There is a Double-sided or a more permanent screw mounting is what you should use. Includes hooks for tidier desks. The packaging is gorgeous. There is a good separation between the headphones. Inexpensive. Not braided cable is what I don't like. There is a power cable. The power cable is at the bottom. The package has a headphone hanger with pre-applied double-sided tape. Extra double-sided foam tape. There are two screws. Three cable hooks are under the desk. There are printed materials. If you decide to mount using that option, you might need to change the double sided tape on your desk. I highly recommend this product, it has 5 stars out of 5. Hit the comments. This review is for something.
👤It works well. Even when I have my beats headphones, gaming headphones, and watch on it, it's very sturdy. There is a I don't have to worry about how fast it charges, it will work if I use 3 ports at the same time. It will charge on and off at will. I usually charge my devices and watch them at the same time. I'm not sure if it's because of the ipad pro or not.
👤One of theusb ports decided to self destruct. Quality is questionable. Contacting MFG to find out how customer support is. Good quality. The mounting screw-hole would have been blocked if the power cable had been oriented facing backward. A power cable would have solved this issue. The loop is not very noticeable when you mount it back from the desk. The product functions as intended. I wish this had at least one plug.
Don't talk about your feelings: DeCLUTTER your feelings. The Big-J under-the-desk headset hangers can be used to clear up space on your desk and shelves. The headphone stand is made with high grade plastic and 3M VHB tape and can hold even the heaviest of headphones with ease. There is a phone stand and a cellphone holster. Smaller than a stand, it's more resistant to damage than other stands. No mess, no screws, and no need to remove the red VHB tape cover, you're good to go.
👤There is nothing wrong with it. It wasn't disclosed. You can see the 3D print lines on the surface. I am ok with it, just tell me about it.
👤I don't like buying a product that is 3d printed and doesn't show you the crappy lines running down the hanger. I hate cheap 3d printing that's being done in someone's garage, but the hangers is surprisingly sturdy and easy to use. If you put it in a more visible spot, it wouldn't look good.
👤My son's headset can't always be found on his bed or floor. It was a waste of money to put them under a shelf next to his bed. The glue is strong. We tried to move it to a different location, but it's stuck where it is. I think that's correct.
👤The stand is strong. Before placing the stands, I suggest to thoroughly clean the surface area. I put these under my desk to make it look better. Would buy again in the future. The items are low price will definitely recommend.
👤The initial sticky pad was strong, but I knocked it off with my knee. I stuck the sticky pad back on my desk after the hook came off. Good purchase.
👤It was very easy to install. I was hesitant at first but I am very happy with how things have gone. I like to keep my head seats hidden because I use a corner desk for gaming and work.
👤I was skeptical about the ability of the hook to hold things. It is pretty awesome after a few weeks of use. I put my headphones on and off all day.
👤These are clearly 3D printed, but they do the job you expect from them. Before you peel those strips, make sure you know where you want them and test them. It is a bonus if you get two. I have two hanging points, and they are both great. I don't know what the purpose of the smaller hook on the back side is but I've used them for my Sound Buds and they work for any in ear sports headphones which are wireless but have that "neck cable" for extra security. I would recommend it to a friend.
👤The little 3d printed underdesk headphone stand is very simple to use and has a cable tidy hook on the back which I use to tuck away my charging cable for my wireless headset. The metal band can sit atop the lip with the Arctis 7 being too small for it. I am very happy with this cheap stand.
👤I don't understand the reviews that say it's not sticky enough. What are you trying to do? Is it ice? The product is of a high quality. Unless you pull incredibly hard on it, you won't move. If it's installed correctly. What I was looking for. Don't be hesitant if you decide to buy this.
👤Absolutely brilliant. I hung my headset under the edge of my desk. Has done the job well.
The convenience and company are two things. Their headset hanger is compatible with major brands including Bose, Bose, and Audio-Technica, and is 5 cm at the headband. Even the largest gaming sets can be held with ease. The mount has a surface area twice the size of the original for an incredible hold. There is a built-in cord management. The cords are secured under the desk by the stowStrap. The premium glass reinforced composite body is twice the strength of cast aluminum and has the perfect amount of friction. There is an optional screw mounting hardware. An extra 3M pad is also included.
👤Wow! How did I not notice this product sooner? There is a I own several headphones. I have spent a lot of money on stands to display the headphones. I find that some of the stands take up a lot of space on the desk counter as my workspace shrinks. I found this product through a deals website. I had no idea that there was aNCHOR PRO, but when I saw it, I thought to myself, "What a great idea." " I could have gotten the standard version for less. I decided to spend a few dollars more to get the Pro because I was interested in the cord-management feature. I'm very happy that I did. The anchor feels something. Like an anchor without the weight. It is a very good product. You can either use the 3M tape or the included screws to install the anchor pro. You can't go wrong with the tape. I was very pleased with the strength of the install. I pressed the anchor in place beneath my workspace after removing the protective cover. Before hanging your headset, it is important to let the anchor sit for 24 hours to "cure" There is a A tug at the attached anchor gives me a sense that this thing is not going away. The product is kept in place by the strong glue. The PRO version is the best for the cord management system. Two very high-quality cord managers are included. You can thread your charging or headphone cord through the clips if you unclip them. The clips have glue on them, which makes them easy to misplace. I use this for my headphones. The ANCHOR PRO keeps them in place. The cord system keeps my charging cord ready. This is an amazing product that is used and quality is excellent. Go ahead and purchase this product.
👤I did not purchase this product for headset organization. I was looking for something to hold my two lantern flashlights. I wanted a product that could be screwed under a cabinet. This product fit the bill. I put it under the cabinet in the laundry room. The flashlights are easy to see and can be charged right where they are. I did it because I didn't want to move the dryer. I wanted to be able to easily remove the hook in the future, so I didn't want to use 3M tape. The manufacturer included a drill bit for the screws. How often do you see that? Not very. There are two pads in the package for those who want to use the tape. One is on the hook and the other is the backup. If you want to, you can remove the tape from the hook, but it gets stretched out. I took it off, but realized I needed to put padding between the hook and the cabinet or my flashlight handles wouldn't clear the little wings at the end of the hook. The hook is useful for mounting my flashlight.
The best choice is the headphone hooks. There are double methods to install all gadgets. The best way to cut down oncluttering is with a headphone stand. The model has a dual headphone holder that can be turned into a rotating sphere. The design makes the clip easy to use and looks great when holding your headphones. All kinds of wired and wireless headphones can be held under your desk with the stick-on 3M VHB. Non-Abrasive aluminum cover is compatibility. It is easy to remove the screw clamp. It is a strong headphone Hook because it can hold PC gaming headsets without bending or breaking. Installation with screws and a rotating ball plunger can be adjusted to fit under tables. padding should be on the arm or hook that will support your headphones. Easy to install, do it yourself structure. Maybe you don't have any ideas to create a proper headphone stands, but the headband is compatible with all aluminum alloy stands. If you take a review from their store, you can start packing up your items in a well-organized manner. Can Mount Anywhere is a versatile design. Those who ran out of space or are simply looking for pure efficiency can use the economic solution of Gamital Design. One of the best headphones is simple, modern and economical. If you have too much stuff on your desk and no room to spare, you can just put your headphones in the drawer and forget about it. There is a lifetime warranty for quality issues. They're confident in their design and quality and their goal is to improve office efficiency with gamital fitting. The store provides 7 hours. There is a local technical support and satisfaction guarantee. Buy it. Enjoy a high-quality product.
👤Work threw out some motorized sit-stand desk frames so I was able to build my wife a desk that was a surface. I bought a butcher block from the hardware store, mounted it, and bought accessories to make it more functional. It would be nice to be able to hang headphones under the desk and use a magnetic charging cable to keep them charged when not in use. There is a The stand is very functional and looks good with the heavy aluminum. I didn't bother with the glue because it wouldn't work unless the desk is very smooth and won't adhere long with frequent use.
👤I put my headset on the underside of my desk in order to clear some space up top, and then I put my headphones on the underside of my desk to have better sound and ear pads. It's easy to put a couple of screws in if that fails.
👤The 3m sticks well. It doesn't budge. Don't worry, watch the video. The headphone hanger is able to change direction with no issues and this is what distinguishes them from the other offerings. There is a Every single detail is taken care of.
👤It works well and gets the job done. I wanted a small mount that didn't take up a lot of space, and this one was great. I only used the backing, not the screws, and the ashesion level is still great, even though I only used the backing. It feels more sturdy because it is metal as well. I am happy with my purchase.
👤I was really annoyed that the shipping took longer than it had said. I gave it to my dude for his office and he uses it a lot.
👤My Steelseries 9x headset has a great hook. The glue on the other hand is terrible. After a week away, it came back to them on the floor. For whatever is worth.
👤The construction feels solid and the parts move very smoothly. I like that you can change the hook and out locks at 90 degrees. I can't say how good the backing is because I screwed it in.
👤The stick hanger is made of high quality aluminum. The material is tough. The anchoring 3M sticky is easy to bear. It's a good design for me, it offers two ways to mount under the desk, slide to another side and use screws. It's really a simple, funcitonal, extremely effective space saver hanger.
Headphone desk hanger mount products from Yocice. In this article about headphone desk hanger mount you can see why people choose the product. Kafri and 6amlifestyle are also good brands to look for when you are finding headphone desk hanger mount.
Yocice, Kafri and 6amlifestyle are some of the best brands that chosen by people for headphone desk hanger mount. Find the detail in this article. Eurpmask Choose The Color Of Europe, Horump and Lamicall are also brands that their products are worth to check.