The dual Headphones Hanger under the desk can hold two headphones at the same time, with a headband width within 2.1inch. The rotating neck of the headphone arm allows it to be used as a storage option for heavy headphones. For a near universal fit on most desks, the Clamp can be as narrow as 5mm and as thick as 50mm. It is easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or table from damage. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.
👤I transitioned from a regular desk to a standing desk and I love it! There is a I bought the Anti Fatigue Bar to stand on so I can work on a stand up desk. I bought a dual stand under my desk so I can hang my headphones when not in use. It's very easy to install on a desk and it's very sturdy, but I like that it rotates so I can tuck it inside the desk rather than have it stick out. Absolutely nothing! There is a 5 out of 5 stars! If you need to hang stuff for storage, such as headphones, book bag, and anti fatigue bar, I highly recommend this. It's strong enough to hold anything. There is a Hope this was useful. If it was, please click on the button below. Thank you!
👤The design is subtle and easy to install, and thepadded hooks can be adjusted to your desk. There is a If you have a thicker desk, you won't have much clearance for your headphones. This was used for our headset. The hooks aren't adjusted to go lower than the C clamp, so it barely fits under the desk. I thought it would be bigger and longer because of the reviews. Would not be possible to fit 4 quality headphones on here. I thought my headphones wouldn't be a problem at my desk. It works. It works and is cheap, but not my favorite for the purpose I bought it for.
👤Excellent headphone holder! I use this to hang my headphones above my headphones amplifier at the back of my desk. There is a The steel is very strong. It is very easy to install. I like the way the hanger rotates. I will probably get another pair of headphones. This is the best I have found before. I bought another one to see which one I liked the best. The other is made with plastic and takes up more space than the other. I'm sending it back. This is the keeper!
👤I use it to hold two briefcases. The Bag of Holding is from ThinkGeek and the large briefcase is from Saddleback Leather. Hanging them from the device keeps them out of the way of the robot. It looks better than any other method of storage I have tried.
👤I wanted to buy a single hook for my headset. I found a dual headphone stand and extra wide brackets. I don't have enough room on my desk to hang this hook. I need something to hang from the shelf. It is about 2 inches thick. The hook is perfect on the edge. I use the extra long arm to throw my headset on there. I know where to find my headsets.
👤I was worried that this might not hold up because my desk has a metal tube on the bottom side, and I needed something that was strong enough to hold two pairs of headphones. I've had no issues. The item I received is not the same as the one pictured. There are two small tunnels on the plane of the headphone-holding areas near the edges that you can cut out if you want to get a cable grip. It's too wide to hold regular 3.5mm cords, so maybe it would hold woven cords?
You can store two sets of headphones under the desk. It's ideal for all kinds of headphones, such as wired headphones, gaming headphones, and Bose, and it has long arms. The raised part is designed to hold your headphones. Solid construction is made from metal. Strong anddurable. The supports hold two sets of headphones at the same time. Max. Load up to 11 lbs. It's suitable for hanging headphones. The rubber pads protect your desk surface from scratches. The headset is suitable for all desks. Glass flat surfaces are also used for suit cabinets. It is easy to install and remove with a matched screwdriver. The screw clamp can be easily tightened. Just use it wherever you please. The ultimate person who is perfect. The factory made this headphone holder. The dual headphone hangers have been tested. Money back and a 12-month warranty are promised. If there is a problem with the product, please contact them via Amazon message.
👤I wanted this to make it easy to switch between headphones. I bought my desk from Walmart a decade ago. This won't adhere to anything but the trim under the fonts, because there's stupid trim and accents everywhere but on the hutch, and that's not tall enough to hang headphones. It is holding a pair of Koss KPH30i. It doesn't seem to fit anything bigger than that. I guess that's ok. You should know that they come with twice as many bolts as you need, because the lip of the piece that holds onto the desk overhangs the screw holes, and you cannot get the bolts seated properly. It was slightly out of tolerance for mine. I had to Torque the crap out of them to get them tight. I said in the headline that they are ok for people using small headphones and a plank for a desk. These won't fly if you have any sort of trim, accents or sides to your desk.
👤The product replaced two single-headphone hangars. Assembly is a big problem. Sheesh. The screws provided are too small for the holes drilled into the main assembly. You have to use a lot of force to get the screws in. It's difficult to get the screws in straight because you are tapping into new metal. The picture on the box is wrong. The section that the headphones hang on goes on top of the part that anchors to the table top. Why would the screw holes have to be cut to accept screw heads? The end product is a lot of work. You can't see the screw heads when it's under the table top. Maddening. Inexplicable. This product is sturdy and functional after all that work. Better quality would be appreciated.
👤This was smaller than I anticipated so it works out better to save space in my work area. The quality of the hangar is similar to other well received products, but it is slightly smaller, but I don't feel like this is a bad thing since it feels pretty sturdy once it is mounted. The picture for the listing shows you exactly how it should be put together, even though there wasn't an instruction manual. If you want to use the knob to secure it to a desk, you should be able to because it is hand tightened and the end is rubber so you don't have to worry about it leaving marks on your furniture. You can hang double the headphones by using one of the hooks for headphones and the other for wrapping the cable around. There is a The only things I would change to make it better is to make the bar wider and arched, and to remove the flaps on the end. I think the design would be better without the ends being tipped because it would make it much easier to take and I don't have any issues with a headphone ever moving. Product seems good and will likely last for a while.
It's compatible with all gaming headsets and headphones. It could be used to hold other things. The dual arms and headphone holder are specially designed to hang two headphones at the same time, making your headsets in place for jumping into your games anytime. It is compatible with all headphones with a headband under 1.37inch. The headset hook is designed for Multi-Scenarios and is great for hanging other products like umbrellas, backpacks, purses, shopping bags and so on. It is widely applied under the wooden, glass or metal desk, table, cabinet, shelf in the office, home, dorm, cyber cafe and other scenarios. You could place your headphones or other items in order and have them ready to use whenever. The headphone hook can hold items with maximum loading up to 4.4lb. When you need it, additional glue will be used. There is no need to worry about damaging the desktop. It is more appropriate to mount screws up to 11lb when more firmness is needed. The lightweight aluminum headphone hanger is sturdy enough to hang the heaviest headphones without bending or breaking, reducing the risk of dropping of headsets. Double protection from scratching and dropping will be provided with smooth edges and raised tips. There is a headset hanger and a screw for the alternative. You can request a free replacement within a year and a full refund within 60 days if it's due to non-human reasons. Feel free to contact them with any questions or suggestions through Amazon Messages.
👤To keep it short, there is a lot of off-brand accessories that you could drown in while trying to find the best one. The price was right and the reviews were good, so I took it and don't regret it yet. The first thing I noticed was how small the real estate on the hooks was compared to the pictures. I'm using a PAWW brand "WaveSound" model noise-cancelling set and, while they do fit on the hook, they don't fit in the room. It's not a lot of room. There is a My plan for mounting this hook was to first eyeball it a bit, then adhere it if necessary, and then use the provided screws and screwholes to finalize it in place. The first couple steps went well. I got it more or less where I needed it, and after trying to remove the plastic side of the taped strip that was stuck to the base, I thought, "Maybe I'll just move this in a little more." No. If they used red 3M tape, I could stick the base of my TV to the ceiling, provided I was given enough. There is no way to remove that tape without using tools. There is a I decided to drill the base in place and add some security because I was a little defeated, and I wanted to make sure it didn't come undone. Unless you're using a drill that is the total of the size of your finger, there is absolutely no way you're going to be able to use the provided screwholes to screw this base in. I had to go in at a 17-degree angle from each side to get this drilled in place. If you're worried about hanging this mount in a place that the screws might be noticeable to others, I would look elsewhere, and unless you have a professional-grade drill attachment, I don't think there's much that can be done to remedy it. The mount hook accessory is designed to keep your wares out of sight and the screws are small enough to get the job done. Although the screwholes are not the best design, I don't think there will be any problems with this particular brand and model.
👤It won't fit most headphones. The unit is small. The head band is too thick to fit in the tiny opening of the headset. The band on my other headset is too wide to fit. There are pictures of what must be children's headphones. Two would not fit side by side. I'm keeping it because it's a perfect size for a keyring hook.
👤I chose this over the other more expensive options. This is easy to use. I don't think it will fall off before I get rid of this desk, it's simple to install and it's sturdy. It has two sided tape that is strong enough to hold it in place until you can put the two screws through it. The screws are not flush. If you look at it from underneath your desk, it's pretty ugly. It was about $5 and I would prefer a perfect flush mount. I can buy screws or find them in my tool box. I'm not complaining and I'm the only one who will notice when one of the screw heads protrudes from my office chair. Anyway. I got one moreusb cord off the top of my desk and mostly out of sight because the headphones hanging won't fall down. If I knew the screw head would protrude, I might have set the brackets back a half inch. It would be out of sight. The only reason I lined it up was to make it as straight as possible. For that, mission accomplished.
The metal desk headphone stand is very sturdy and easy to assemble, it can hold any weight from headphones, and it is free ofcluttering your desk. If you hang a pair of headphones on a desk, they won't fall or be in the way of the computer table. It's short so that it doesn't get in your way. It is compatible with 0.28" to 1.46" thickness of desk and can be easily moved around as needed. The surface premium coated metal hanger with 304stainless steel screw thread and natural rubber on the clamp-end is safer for kids. There is a lifetime warranty. The package includes a headphone holder hook.
👤It is useful to help tidy up my desk. I have my headphones, headset, and controllers on. It was easier to keep the desk surface clear. The quality of it. I tried to wiggle and make sure the weld was okay since I read one person had issues with it. Thankfully, no issues on mine. I have had it for a while now.
👤I found that my headphones were occupying more space than they were convenient for. The device is rock solid and can easily be attached to my desk. My cans have a place of their own where I can be safe. It is worth the small cost.
👤It doesn't mount well and keeps falling off. It was kind of expected. If you put it somewhere that kids won't touch much then it's ok, but if you put it somewhere that kids won't touch much, then it's not ok.
👤Very sturdy and well made. Unless abused, this will not break. The arm is long enough to have 2 headsets. The stands that waste desktop space are better than this. I was glad I bought it.
👤The reported measurements don't seem to account for the large clamp. It won't fit on the side of my desk. I will have to use the side of the hook or relocate it. It seems good quality but swings freely even when tightly held.
👤I put the headphone holder on the end table. The item holds the headphones in place. It is doing the job at a reasonable cost.
👤There is no need to chase a wired headset around the card table being used for a temporary work from home desk. No more pulling the cord out from under the papers. Being able to answer a video call in a few turns is priceless.
👤The stand works well. It doesn't fit the shelf I wanted it for, but my brother found a good use for it as a hat hanger, so I can't complain.
AJUSTABLE CLIPS: The clamp can be adjusted based on the thickness of the desk, and can be fixed on most tables. High quality. The desk hook holder is made of aluminum alloy. Silicone rubber on the stand protects your headphones from being scratched. It is easy to remove and re-attach the screw clamp. Soft rubber pads on the ends of the clamps protect your desk or table from damage. It is easy to install on desks, cabinets, glass surfaces, desktop towers, shelf, etc. It's great for hanging game controllers, cables and other gadgets. The PS5 and PS4 Headsets have a headphone stand. There is a space-sharing program. The one-way folding swing has a length of 3.15 inch and allows headphones and other small stuff to hang on it. You can save space by folding up when it's not in use. You should arrange space ideally with horizontal and vertical installation.
👤I use headphones a lot in my work. I was looking for a stand that would work in my space, but it wasn't what I was looking for. I wanted a stand that was low profile and sturdy. I use it all the time. I don't have to drill, the custom shelving around my work station will not mar it, and I don't have to reach for them. If you don't like the idea of a clamp, they can be permanently mounted. This item is a surprise in an age of cheap, disposable excess. You can't go wrong at $1299. I will use this manufacturer again for their affordable products.
👤My mother is in a nursing home. She wanted to attach a hook to the table. She wanted the hook to hang her bag. I was trying to figure out what kind of hook I could get. I couldn't install the Covid for her or get it to return if it didn't work, so I couldn't get it back. I didn't know the table's thickness. I saw this hook and thought I'd try it. I sent it to the nursing facility. My mom was put on the table by one of the aids. It was easy to install, but had to screw it on. My mother said it's perfect. If anyone has a relative in a hospital or nursing home, this would be perfect.
👤It's a headphone stand that folds up and is not in the way of your desk. It works and I need it. The only complaint I have is the lip edge that curves up where the headphones rest has a slightly sharp edge - it won't cut you - it's just not smooth like I think it should be. I have to be extra careful with my headphones because they have a soft leather-like material on the headband and I have to remove them from the stand. If you are reading this, you have a good product. You will have a better product if you round off the edge.
👤I bought this product because it is the only one that can fit on a desk with 2 inches of clearance. There is a It's build quality is good. I would like it to have a cable holder so that I can put my long headphones on it. There is a The reason I'm leaving a review is that the product's rubbers are not that good. The rubber is coming out of the top part of the clamp. I pushed it back, but it is coming out again. I think they need to use a better glue.
👤I picked this unit because it had pads on both sides to protect the desk. It has multiple screw points since it has two assembly options. The screw heads look nice and prevent them from catching on things. The screws are the same length as the pieces of aluminum. They stick out the back of the desk/shelf you're mounting to. You can either mount it to your desk or risk marring it with the screw ends. I don't know if I'll try to sand down the screws or return it. There is a The hinge seems flimsy and rattles, but it is pinned and has a natural lock point so it shouldn't break. The piece of padding at the top edge makes the unit stay closed when not in use. There is a The unit came with an allen key and an extra set of screws.
You will get a headphone holder. 60-day money back is promised. They are confident in their products. Please contact them if you have any questions. The foldable headphone is called a Hanger. It can be lain flat on the wall when it is not in use, folding, or expanding. The built-in cable loop is designed to prevent your headset's cable from dragging on the ground or getting caught between your desk chair's legs. Universal Headphone Stand Under Desk is a universal stand that can fit on most desks. It is easy to remove and re-attach the screw clamp. Soft rubber pads located on both ends of your desk or table protect it from damage. Premium quality is made of aluminum metal. 60 days of money back is included in the Headset Holder Warranty.
👤I purchased the upgrade version without the cable organizers and the new upgrade with the cable organizers. Both versions had the same features, including the solid aluminum screw knob and the notch on the screw clamp pad for attaching to round desk legs. They arrived at the same time, and the upgrade version matched the catalog picture. The Newest upgrade did not. There are significant differences between the pictures of what arrived and the picture of the Amazon catalog. There is no notch for mounting to round desk legs, and the screw clamp pad is not completely flat. The cable organizers are on the opposite side of the hanging arm. The quality of the product was lowered from theUpgrade version in the changes #1 and #2. I will return to Amazon for a full refund. There is still a 1-star review. The seller reached out to me shortly after my initial product review to let me know the product I received was the older version which was replaced in August with the newer version. If I were to order it again from Amazon, they would give me a coupon that would let me get one for free. I took them up on their offer, but I was surprised to see that the older version of the product that had been re-released by Amazon was still there. The seller doesn't control what version of the product remains in Amazon inventory, but this is now November. You would think they would have exhausted their older version of the product by now. I purchased the exact same version of this product from another seller and they were able to deliver the newer upgrade version. 1-STAR to Amazon for pushing old inventory and 1-STAR to the seller for updating their product description, but then continuing to sell the old version through Amazon under a new product listing which does not match reality. I wonder how many other people who thought they were buying the newer version of the Prime Day product got shipped the older version. I was ready to write-off Apphome Direct forever after my second disappointing delivery of the older version of the product. Apphome Customer Service is persistent in ensuring that their customers are completely satisfied with the purchase experience as well as the products they sell. They apologized for the incorrect product being shipped and asked what they could do to make it right, after they had already fixed the issue. The only way for that to happen is for Apphonme Direct to send me the correct version of the product at no cost, and they will refund the price of the product if I purchase it a third time. "Third times the charm" is what they say, and it was in this instance! The newer version of the product was shown on the product page after I received the product. It's a good sign! I have dealt with a number of sellers on Amazon over product issues, but Apphome Direct Customer Service went above and beyond to make sure I was completely satisfied after my previous two bad purchase experiences. Apphome Direct is deserving of praise. I am happy to make more purchases from them again after having a positive experience with them.
Keep your headset's cable in place and prevent it from dragging on the ground, that's what the upgraded version of the cable holder says. You can keep your charging cables in a safe place. Keep your desk clean. Practical and convenient! It's great for home, office, classroom. Save space with the foldable arm. The arm can be folded up when not in use. When folded, it is smaller than your palm. Save space! The rubber strip on the raised arm keeps it folded. There are no worries about the adhesion. The rubber pads are attached to the ends of the clips to protect the desk surface from scratches. The desk can be mounted within 50mm. Also fit cabinets, shelfs, and glass flat surfaces. Excellent quality, no damage to the leather. The rubber pad on the headphone hook is arched. The holder has a 3-inch arm and is ideal for both wired and wireless headphones. It's also suitable for backpack, purse, umbrellas and so on. The headset stand is made from metal and can support up to 11 lbs. 60-day money back, 12-month warranty. They are confident in their products. Please contact them if you have any questions.
👤You think you don't need this product until you buy it. I don't like having to put my headphones in a container every time I use them, and I don't like having to take them out. I didn't like leaving my headphones out to collect dust and suck up space inefficiently. I decided to give this product a try. I love it. It's simple, elegant and very versatile. I was worried that it wouldn't fit on the front side of my desk. It was easy to fit to the legs of my table because you can adjust the hook's direction. It will still collect some dust, but it will be less than under something. This product is great for anyone looking for storage items.
👤I didn't want a stand on top of the desk as there was not enough room for one without my desktop getting crowded. I was looking for a hangar that I could hang on the inside of the frame, so that it wouldn't stick out to pedestrians. There is a This hangar is perfect. It seems to be well made and sturdy, has pads so as not to damage the desk frame, and it has more than enough adjustability to accommodate thicker desk frames/tops. I like the clips to hold my headphones, it's nice to be able to roll it up and stick it in without having to worry about the wire getting loose. There is a My cable-managed PC station has a new addition.
👤I bought a new headset for my computer. I picked it up. The rubber coating on the ledge helps keep the headband from sliding around. It has a lip at the end that helps to keep your headset from sliding off of the end. I had a similar stand for my headset, but it didn't have either of these features. I decided to replace the stand for my console headset after I thoroughly enjoyed the new one. I like that the stand can be folded up when not in use. I would highly recommend this stand if you were thinking about getting it.
👤I attached this to the leg of the table that I use for my computer desk to free up space for my headphones. I like the fact that the mount can be turned so that it can be mounted vertically or horizontally. The screws/screw holes/allen wrench are not up to snuff. The allen wrench takes a little work to get into the screw heads, and the screw holes seem to be off-level. The screws are not in a straight line regardless of orientation. It is very odd. I am able to change the orientation of the mount without a problem, and once mounted it is not coming off the table's leg until I remove it. I am very satisfied that it mounts firmly. It's probably too much for the headphones I am using, but that's not my main concern. I'm happy that I can keep my headphones plugged into my computer and have them tucked away, so I can use them whenever I want.
It's simple and elegant, and makes your headphones well-displayed when not in use. Make your desk tidy by freeing up your space. The Silicone pad and aluminum headset stand are made of anti-scratch material. Two mounting methods with a strong Adhesive tape or 2 screws are easy to install and look good in any setting. Headphone hanger mounts can be used on a wide range of surfaces. There are under desks, tables, shelves, wall cabinets and shelving units. It's compatible with all kinds of headphones, such as wired headphones, wireless headphones, children headphones, gaming headphones, TV headphones and so on.
👤I use this to hold an Arctis headset. It hangs in front of the tower because it is attached to a desk. I didn't use the glue. Pre-drilling holes into the desk is recommended if you are attaching with screws. I like the subtle shape, the slight grip of the silicone pad, and it could comfortably hold a headset larger or smaller than mine. There is a The flat plate on the top of the desk is something I would change. I would like to see an alternate model that was larger and more similar to the one on the desk. You install the two screws, then slide the mount on and pull it forward. If you put it from the front you risk it sliding off the screws. It's not a big deal. It's not an optimal design choice, I see why they made it that way. There is a I'd buy it again if I needed a similar setup.
👤The screws broke. Not my fault. There is a The design makes it difficult to get the screws into the desk. The screw tip fell off after the holes were set. It was so weak that it broke into metal powder. I show photos. I had to dig into the wood to get the screw out of my desk. I show normal screws for comparison. The screws are narrow to get the mount to work. I gave up trying to adjust my other screws after about 20 minutes because they were too large. I would use glue, velcro or glue and glue over the garbage mounting options they give you. There is a The rubber part covering the hook is of good quality. Good quality is probably the only thing that's good in the unit. The metal is painted so lightly that it will chip easily. I scratched one side before putting tape to cover it, like I screwed for 2 seconds. If you want to install screws, please put tape on the edges to avoid scratches, but you can use a Sharpie or paint markers to touch it up. I don't think the metal will break like the screws. They dress up to look nice. The reviews here are not critical of what you're actually getting. It would cost about 10 cents to make in China. It's a better design if you want an under the desk hook, not on the side of the desk. I would have returned it for the poor quality if it had cost more.
👤It was really solid. Glad they use 3m tape, it works better than most others. I attached it to 2 sides and it barely moves, so I can put a lot of force on it. I use padding around the band. It fits with what would be recommended. The desk is black. Make sure you clean the area before applying and if possible mount in a corner where you can take advantage of both mounts. When mounting, make sure you press down hard. Press down on the flat surface to make sure the mount is properly adhering to the headphones hook. Many people forget to do that with 3m tape.
The under desk mount is convenient for storing. Easy installation of a springed C Clamp. For a near universal fit on most desks, the Under Desk Headphone Hanger is used. It can be lain flat on the wall when it is not in use, folding or expanding at your convenience. It is easy to remove and re-attach the screw. Soft rubber pads located on both ends of your desk or table protect it from damage. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers, shelfs etc. It's great for hanging game controllers, cables and other gadgets. The TV stand does not have room for the soundbar. The sound bar width is less than 2.1 inches, it is 5 lbs and there are two racks to support it. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.
👤My TV stand doesn't have room for the soundbar so I used two racks to hold it. The sound bar is 5 lbs heavy and supported by two racks. I'm happy it worked out.
👤I'm glad I chose this one because there are so many different models to choose from. It has a heavy, solid feel to it, and it has a nice padding on the arm so it won't damage the furniture. It folds up when not in use. Great product! I am an actual consumer, not a fake reviewer.
👤They are very well constructed. I attached them to the end of the stand that holds my TV. I put my sound bar on them. The sound bar is small enough to fit on them, so they can hold it in front of the TV. The sound bar could not be held on the TV stand because there was not enough room.
👤This thing is perfect. My boyfriend's desk has a small lip on the sides that hangs over the sides, but it is a vintage metal desk. Since these holders are mostly designed for desks with empty space below, I had to search through a million to find one that didn't require so much depth for the tension screw. It works great after finding this one. It's easy to install, but will still hold a large clunky headset. The photos have accurate measurements.
👤There are three people working from home, one of them is a gaming son. I'm running out of places to put my headsets, my son has a gaming headset, and I've got my headset for Teams. This particular hook is unique for a couple of reasons. I like the metal construction. It blends in with any black furniture or decor. If it happens to be in a high pass area of your desk or table, the folding design will allow you to get it out of the way. The ability to adjust the orientation from a vertical to horizontal one was a feature that made this a definite purchase. My desk is made of wood and metal and has a lip on it. The standard vertical style brace clap design is useless because it is short of the height of the table. I can't use boom stands with this table because of the other accessories I have. The only thing I had to do was remove the two allen screws and attach them to the leg of the table. It is now a permanent fixture. A huge problem was solved when I reached for my headset. I bought two of them for work and one for home. A great buy.
👤I always remain objective and honest when reviewing products. I always review with information that I feel others would like to know about the product, as I always assume what I'm writing will affect the purchase. I try to go beyond surface characteristics and input into quality, value and application. I will always end the review with an answer as to whether or not I would purchase the item again, which I believe is the most critical question pertaining to the item. Let me know if you want me to review your items. I was looking for a cheap hanging solution for my headphones and this product was the only one I could say anything about. I usually have my headphones on, but it can flip up when not in use. The screw base makes it easy to use for different sizes of desks. I'll probably buy another one for my daughter. It's a very handy device, serves the purpose well, and is cheap, but sturdy. You won't be disappointed.
You can hang the headset and extra cable on the front hook and the back hook is used to hang bags. The band of your headphones won't be damaged by soft PU leather. The jaws of the clamp can open wide, and the protective pad can be attached to a desk. It is easy to install and a good solution to keep your cans from getting scratched. Distinguishing: The package includes: Headphone hanger x 1, hex wrench x 1, and a second one. Devices and accessories are not included.
👤It's a nice idea, but I put my backpack on it and it lifts up from my desk. It needs to be able to hold onto the desk.
👤My desk is very narrow and I needed a long piece of furniture. This did the trick, but barely. It is sturdy even so.
👤It's poorly designed so it moves around a lot, so you can't really tighten it.
👤It is easy to install a stand that will keep headphones and wires off the desk.
👤I hang my purse under my desk at work. It's better than those small purse hangers.
👤The product was good, but shipping took forever.
👤Arrives as described. It's helpful to have my bag and headphones at my desk.
It's suitable for most headphones, such as cell phone headphones, earphone, MP4 and so on, and can be used with diameter within 2.5mm and width within 4.5mm. Product has been upgraded. The under desk headphone holder can be used on desks up to 2in thick and as small as 0.2in for a universal fit. Save Space foldable headphone holder can be folded up when not in use. The rubber strip of the arm keeps it from folding. It is very easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or shelf from scratches. It's very easy to install a multi-purpose headset holder on a desk. It's great for hanging game controllers, cables and other gadgets. It can hold up to 11LB. The cable loop is built to prevent it from dragging on the ground or getting caught between your desk chair's legs.
👤I wish I would have started with this one instead of the ones I bought first. I used a cheaper one that used glue and couldn't find a good position for my headphones that were comfortable. You can't move them after they're stuck because they only come with 1 glue. There is a This is what I needed. You can change it's location very easily. If you upgrade desks. It folds up when I'm not using it. I like that it's strong. It doesn't fall or lose its place even after bumping into it. There is a It's large enough to fit my large cans and I've tested it with other pairs and there are no issues.
👤They don't mention that this thing is made of aluminum. I was expecting something plastic and was pleasantly surprised to find it was metal. I like the design of the fold-aways. I was hoping the cable holders would fit my headset, but they were too thick. Excellent, recommended.
👤Well made and foldable. There is a I used to use the forged straight angle headphones. There is a The model folds out of the way when not in use. There is a It has to notch through the string cords. It was perfectly engineered. I own a lot of top tier headphones and these brackets are a must. Highly recommended.
👤This works well. The metals seem strong. I wish there was more padding on the rest of the headphones. It's a good product.
👤I bought another style from the same store. It's decent for the price and is their house brand. This one is a better design and value. Highly recommended.
👤Exactly what I wanted. I keep my computer on my arms to keep it clear. I wanted to keep my headphones out of the way so I mounted something on the desk. This is sturdy and mounts easily. It flips up and down. I was very happy with the purchase.
👤This was everything I needed. It holds my headphones and keeps the cable in the headset for convenience.
👤This fits my needs perfectly. The little cutout for the headphone jack is awesome, and it is fastened nicely on my home desk. Everything is clean. Nice job!
👤Good quality. I use 4 of these to hold in place the 8mm glass sheet on my work table.
Headphone desk hook metal products from Apphome. In this article about headphone desk hook metal you can see why people choose the product. 6amlifestyle and 6amlifestyle are also good brands to look for when you are finding headphone desk hook metal.
Apphome, 6amlifestyle and 6amlifestyle are some of the best brands that chosen by people for headphone desk hook metal. Find the detail in this article. Txesign, Moko and Apphome are also brands that their products are worth to check.