The Universal Game Controller HOLDER is suitable for your most old and retro controllers. It works with many game consoles and PC game pads. You can expand or grip the branches to fit your controller. The Universal Headphone HANGER is suitable for all headphones and can be loosened or tightened to fit. Installation on a horizontal or vertical surface is called universal under design. It's easy to remove and reattach the Clamp. The rubber cushion is attached to the table or desk. There is a black coating on the hanger. No harm to your headphones or game controller. Hold up to 10KG easily. Universal design - hold your headphones and controllers in one place. It applies to a bag, umbrella, backpacks, keys, cables, etc. To accommodate accessories, please adjust the little arms of the hanger.
👤Cheap, careless parts are required for assembly. The person threw the cheap objects into a bag for you to assemble. If you have an Ace Hardware, you can replace the tacky silver steel one with a black steel center plate, better screws and nuts, a few washers, and apply your own padding strip to the top since this one was so shoddily put on. Pick up a new piece to hold the gamepad holders to the center plate because they feel like they could break at any time. If you already lost your money, then just do it and be done with it. There are no instructions or papers. You could lose nuts when you open the bag. There is a This product is the only one of its kind and no one cared about it. I don't trust the other morons who sell gamepad/headphone holders on Amazon because they all want to use the same type of tape.
👤It is pretty much all of the same thing. It does what it is suppose to, but not a quality or value purchase.
👤There are missing screws and bolts.
👤Not worth the money. Poor design. I have 3 desks, but they don't fit in the same place.
If you care about style, quality, andVersatility, OAPRIRE is the best choice. High quality. The max weight of the controller stand is 4 pounds, and it is made of sterling quality acrylic, with high toughness and fall resistance. The xbox one ps4 switch pro controller design has the ability and compobility to keep the controller safe from scratching and dropping. It is compatible with a wide variety of video game controllers. Easy installation. No tools or holes in your walls make it simple and easy to install. Each controller holder has cable clips. There is space for saving. The controller stand is a great way to display your controllers on the wall. If you care about style, quality andVersatility, this controller holder is the best choice.
👤I love these! I've purchased a lot of mounts for controllers and headsets. My husband's gaming cabinent has been completely transformed by it. The command strips are so sturdy that you can slam the cabinent door with the controllers mounted on them and they won't fall off. It's very easy to attach. Installation time for all five mounts was about ten minutes, with all my measurements, but I did get a little snoozing with our specific use. I think they look sleek and modern. Highly recommended for your storage and organization.
👤It's been a long time since these were solid. I also bought a PS4 and they work great for PS4 as well, but they aren't as snug a fit for PS4 as they are for Xbox. It works well for the Switch controller. The controller stays up if balanced. I've bought 8 of them so far and I'm happy with them. There is a There are 4 large square pieces of sticky, high quality double sided 3M tape. There are 2 cable managers with tape. It'sFits. The controller of the XBOX ONE is perfect. They fit the PS4 controller well and will not fall off. The material is high quality. There is a The PS4 controller has a little wiggle room, but it fits well. They will not fall off. I use these for my PS4 controllers. The holder isn't designed for the Switch Gamecube controller, but it can still be balanced on in one of my pictures.
👤These are made out of plastic. When they are loaded with a controller, they are about a quarter of an inch thick. I tried to put some pressure on it. The v-shaped portion that is attached to the wall is the only part that moves. It would be difficult to break under normal use. It seems like it will last a long time. The finish is black. There is a The package also includes a few cable management clips. The mounts have not yet been attached to the glue. You will apply them yourself. If the consumer chooses to use a different method of attachment, I like this option. I don't use the glue squares because I think they will damage my paint if I have to remove them. I am attaching Command brand strips for easy removal and relocation. There is a My controllers fit perfectly into this mount. They don't slide one way or the other. It is a good fit. There are two things I don't like about this item. It's a fingerprint magnet. As soon as you touch it, you will see how dirty it is. It is easy to remove from the shiny surface, but it is a problem. I don't like the big white logo on the front of the item. I was hoping it was a sticker that could be removed, but it is not. I will be painting my mounts a flat white so that they don't show fingerprints or match my room better. I am happy that I did not pay more for the "name brand" mounts that are nearly twice the price.
Most third party game controllers, mobile phones, and desktop PC gamepads work with the Xbox controller stand. The rack headset stand was made of high quality thickened aluminum alloy, which was only 0.078 inches thick. The XBOX one x stand has a gravity base that can be placed on your desks, shelves, cabinets, glass surfaces. It is also a piece of art in your home. The controller and headset was designed to keep your game space free of mess and to keep your controllers and headset in a neat place, so you can place them in your convenient way. The stand is easy to install and clean. If you have any questions, please contact them. If you have a problem with the ps5 controller phone holder, you can request a refund and they will process it within 24 hours.
👤For Christmas, I got this for my grandson. He was very happy with it. A great transaction.
👤My son likes it. He can find his controller in this area.
👤The item was the same as the description. The instructions were easy to understand. It took less than 10 minutes to assemble. Very strong.
👤If you don't have a lot of space to store controllers, it's a perfect holder. My son uses it on his desk and it is what he needed.
👤It looks like the picture. Very sturdy.
👤It is easy to put together, just be careful when you put it in. Good fit and slim. The rubber rests for your controllers can come off easily, but that is not really an issue.
👤There were extra pieces that weren't needed and missing screws to put it together.
👤Holds the controller and headset. Simple. Looks good.
It is easy to carry and install for beginners. The controller holder is perfect for universal video game controllers, including the PS3/PS4/PS5 and Nintendo Switch Pro controllers. Get 4 packs holders in one amazing package and enjoy your controller museum. The foldable wall mount controller holder is an upgrade to the previous design and will allow you to free up more space for your game room. It can be opened or closed. The controller is out of the way when not in use. It's a better angle to display your controllers. The two methods of installation are strong and simple. Max. The load was 3.3lb/ 1.5 kilo. The screw and anchor installation is a more secure option. Max. The load is 6.6lb. The controller holder can be mounted on the wall, beside the desk, behind the PC monitor, and on the shelves. You can show your controllers anywhere you want. Giving the controller a safe home is multi-protection. The sitting bed of the controller holder has an anti-slip pad to protect it from being scratched. The controller will not fall out of the holder if the raised baffle is used. The package has a foldable controller holder, strong glue, screw, and plastic anchor. You can enjoy a long-term peace of mind with the included 12 months warranty. If you have a question, please contact them by Amazon message.
👤I bought a similar wall-mount for my husband. We have a cabinet next to his desk that I mounted to his desk, and when I saw these, I realized they were perfect for organizing his console controllers. I mounted all of them on the cabinet with a couple of inches between them so the controllers wouldn't hit each other. The mount design is universal, so it fits the PS5 controllers as well as his PS3 controller. It was easy to mount since it was two small screws. I did not need the anchors. Getting them level is not a problem if you know how to hang things by screws. The sticky pads can be used as guides for the screw placement. I had to tighten them down a little at a time until they were snug enough for the cover to slide on. I handled them with care because they are plastic and I wanted to be safe. There is a The design and ease of use are both good, but the material is not as durable as I would prefer. I am leaving my review at 5 stars. I would buy more if I could find another place like this where I could de-clutter.
👤I have been using these for the past 4 months. These work well to keep my controllers off my desk. It's nice that they fold up when you don't use them. I wanted to warn you that you should not use the included strips. Those strips are great at keeping the mounts on the wall, but they are not strong enough. I had to take these off the wall and it took me a while to unstick them. I used a heat gun to get the glue off. If you don't want to drill holes in your wall, then I would recommend that you use command strips. They work just as well and are a lot easier to remove from the wall. The other things are great. The heat gun I used to get the glue off did not damage me.
👤It uses either screws or glue for installation. The glue should work well for most purposes, which makes it easy to install.
👤I would give more stars if I could. I used my own heavy weight hook. I stuck them to my wall. They fit every controller I have and they're a good fit for a phone. When not in use, it folds up and out of the way. I'm getting more of these.
👤It works best on xbox and switch controllers.
👤This was the perfect product for my husband, who wanted the controllers to appear like they were hanging by themseleves. The controllers fit well and they were ready to install. No slipping or falling out.
👤I love these so much. They're sturdy and come with screws in case you want to screw it on. I like that I can display my controllers and still be rental friendly.
👤These are effective. I like the convenience of their design. I own every controller in the house.
There is a package list and reliable warranty. MAONO products have a 12-Month warranty. The Universal Game Controller HOLDER WALL MOUNT works with most third party game controllers. The angle of their hanger has made it possible to reduce the scratches on your wall and controller. The Universal Headphone Hotline: The wide and curved seating bed is suitable for almost every type and size of gaming headphones. The headband will not fall off if the bed is curved. SECURE INSTALLATION Their Universal Game Controller & Headphone hanger mount can be installed almost anywhere, it comes with 3M VHB tape pre-fitted and can be installed on desks, shelves, cabinets, glass surfaces, rear of the TV/monitor, and many more. VHB is used by GoPro to secure their cameras during extreme activities so you can be sure it won't let you or your controllers down. The max weight limit is 1.5 kilogram. Hang your controllers and headphones out of the way so that they don't get damaged and keep your game space free and organized. A universal design to hold both your game controller and headphones in one place looks stylish and is held securely.
👤The price is hard to understand because it is 3D printed. I have seen some issues in other reviews, but it seems like it's attached to me. It's the kind of glue that if you're not careful, you can damage the wall. There is a When people complain about the failing of the glue, the easiest answer is to clean the wall and let the glue cure for 24 hours under no load. I haven't been using it for a while. If it fails on me, I will update this review. The controller and two pairs of headphones are still on the wall 10 months later. Don't be lazy, clean your wall and let it cure for 24 hours, it will stay.
👤I use this for my PS5 controller. I have had trouble with it sticking to the wall. It fell off a couple of times, which is concerning since I have very expensive accessories on it. I put more tape on it, but I am not sure how long it will last. There is an update. After it fell the first time, I secured it with tape, but it fell again and took some of my wall with it. I have to go with a no on this one.
👤After about a month of use, the glue started to come loose and I had to make a mount for it on the wall. If you want to have one of your own, you can just look up the file to print it. I think it works as well as it costs.
👤This product looks cheap, and that is the only flaw I can see. It's not the most attractive way to make something like this, but the simple design is elegant enough that you won't be ashamed to hang it on your wall. It looks like any other plastic hanger once you put a pair of headphones and a controller on it. The small hook on the back of the hook is easy to use, and the second hook on the top can easily support a coiled-up headphone cord or controller wire. The hook on the back is not big enough to hold a coiled cord. It might be able to fit both a controller cord and a headphones, but that would be pushing it to the limit, so if you need space for both, this might not be the product for you. There is a The glue is strong and has held up well. I tested it by applying some extra weight and had no problems with the hanger or the glue. It's a permanent home for my headphones and controllers, and it's not showing any signs of weakness. Some reviews have said that the glue didn't work. It's possible that some people got a bad case, but I would point out that it's necessary to clean the surface before applying the hanger, and that you need to wait until it's completely dry. It will work for you if you don't mind that it looks like a piece of plastic.
We are committed to making sure that you are 100% satisfied. If you have a question about their products or services that you're not satisfied with, please contact them by email and they'll try to help. The authenticity is there. Their products are designed in Nara, Japan. Yamazaki Home, Amazon.com, Red Cat, Sportique, and Sunrise Image are some of the sellers that they recommend purchasing from. There are no other authorized sellers on Amazon. The game controller holder is suitable for almost any version of a modern game controller. It'sTILE: hooks hold wires in place and the stand can double as a charging station. The controller stand is made of steel and will stay balanced even while carrying multiple controllers and headsets. Each tier can carry 1.1 lbs. There are dimensions and weight. The product is 14.2 inches in length and weighs 1 pound. COLLECTION: The Smart collection has a clever twist. Each item has a design feature that makes it more useful, functional, or convenient. Every Smart product was designed for maximum practicality, whether it be an extra pocket, a magnetic solution, or an element of customizability. Simple designs suit modern homes. Yamazaki is a brand that is inspired by small-space living in Japan and is designed to makeIncremental improvements throughout the home and elevate quality of life. Yamazaki. Home is simplified.
👤I saw this stand off from Amazon Japan, but I never got them because the shipping was a tad too expensive. I saw this listing a week later and couldn't pass up. It's very easy to assemble and it's worth it. It does the job well and is sturdy. The handles can be adjusted. I highly recommend 100000.
👤There's too much stuff out there. This is in a neat way. I bought two for each person. It worked out well.
👤I love how it holds my controllers. The Ps5 controllers are a bit heavy. It tilts to the side. I put my hardrive on the back of it to weigh it down.
👤I'm trying to be more organized with my gaming setup. This helps.
👤It's a good product. It is easy to assemble. The materials look sturdy and durable. There is a It's a good way to display your controllers and keep them in the right place.
👤The controller tree is always your controller.
👤Gekauft fr Nintendo. War schnell. Aber schn billig. Nichts fr die Ewigkeit. Gummiringen gehalten is the Einzelnen Ebenen. Lsst, jedoch dadurch, so variieren und verstellen. Leider viel.
👤It's difficult to find a gift that my sons will use. This is a great way to keep all the gear charged.
👤Sehr guter Halter fr verschiedene controller. Ihn bestellt fr meinen consoles. Alles are super und es are aus. The Halter ist aus Metall. I am empfehlen. Ich ist die bestellt fr meinen Freund.
👤This is the stand that is featured on all of the desks if you are suffering from tiktok gaming-girl gatekeeping. It is made with a metal rod so it feels secure.
The two player mode allows you to store two controllers nicely away, so you don't have to look for the second controller when your friends come around. They will be placed on the wall. The stand is multi advanced and includes a controller holder and headset stand. Up to 6 universal models can be placed. It's stable and flexible, so it's a stand and also a beautiful storage furniture, and it's compatible with your stylish interiors and digital home appliances. The symmetrical Aesthetics Design is derived from the oriental concept. A sense of luxury can be seen with high quality materials. The low center of gravity design, with high-quality silicone pad, non-slip and protect your desktop, is Stable and Flexible. The environmental protection design makes it easy to install. It takes 30 minutes to hang up your controllers. You can order now with no risk. If you are dissatisfied with your order, you can contact them at any time and they will deal with it in 24 hours.
👤They were very prompt in their response and I got a working replacement after they accidentally sent me a bad set. I want my controllers to not be piled on top of each other in a corner. It is a great use of space. I was worried that the controllers would fall off since I exercise in a room with lots of cardio and jumps, but there has been no issue. They have not fallen or wobbled. A product and support.
👤I've already purchased the two tier version of the controller holder. They're perfect for organizing controllers. The holders can be adjusted, and mounted to the pole with a tightening screw. There is a The two tier and the three tier are the same. The mounts can be staggered so that larger headphones don't get in the way of the other holders. I like this product. Will likely recommend it to others.
👤It was very easy to assemble and hold many controllers. They hold 12 controllers on each controller. It's great for storing on a college student's desk.
👤It looks sleek and gets the job done. It holds both consoles and headsets. The holders are not a problem if you tighten them and the top comes loose but not enough to ruin the product.
👤It works like a charm. To set up in the east. The top part is perfect for a virtual reality headset. I have a case for the second one. I have the OG day one switch on and I also have the OLED model. There are some controllers for the Xbox Series X and Stadia Controllers on there. It looks great! There is a The top shelf is seen as less secure than the others. It slips down if I touch it. I have to be very careful not to touch that part. It is great, except for that.
👤This stand is perfect for anyone who has a lot of controllers. The only issue I have is the middle, where they screw in together, but it's not a deal breaker. It was worth it and I was glad to have it. I have on there 6 things, 1 ps4 and 1 ps5 controller, 1 switch pro controller, 1 xbox series x, s and xbox one x controller, and one controller for each.
👤It is sturdy and easy to access my giant collection of game controllers without having to worry about my desk being cluttered. Absolutely worth the purchase. It's easy to assemble.
👤It was easy to put together and I was happy with it.
👤It looks cute and serves its purpose. The holders can be adjusted to where they are on the stand.
👤This was a gift for a friend. It helps to organize the controllers and headphones.
👤All my controllers are stacked correctly. The design is strong and sturdy. It is value for money.
The folding hooks are very easy to install. The hooks are reinforced with 2 screws. There is one controller. The person is named Holder. The MoKo controller has the ability to hold two controllers and a headset. As controller holder and also as a stand for headphones. Their controller holder is compatible with universal gamepads, such as the Xbox One, XBOX One, XBOX 360, PS3 and PS4. The stand is suitable for universal headsets. Saving your space and money is important. The design of the storage for the game controllers and headset will keep your room organized. You don't need to buy another stand for your headset or game pads, saving you money now. The Switch controller holder is made of high-quality aluminum alloy and is strong enough to last a long time. No one is worried about its bearing capacity or being broken easily. You can install as you please. Their stand can be installed in two ways, by strong glue or screws, which will give you much convenience, just choose one way as you please.
👤The controller holder was easy to install and looks exactly like the product images. It holds both controllers. The wall mounted sticker was very strong, so it is important to be careful with installing it. Should you want to go that route, it also includes wall screws. It was a great bang for your buck.
👤My mom bought me a computer. This helps a lot. It was easy and worth it.
👤This product is terrible. Everything is made from cheap materials. The setup was difficult for something that should be easy and after setting it up it was not strong. I would recommend buying a controller from someone else. I was surprised that something so simple could be so bad. I hope no one else buys this so that they don't feel the same way I did.
👤BELLA IDEA! L'ho attaccato con 2 adesivi. senza dover bucare ilo muro, non avrei potuto per la presenza di un telaio scrigno all'Interno. 2 joysticks e le cuffie! There is a In ordine la scrivania di mio figlio, lo trovo. There is a Per mio figlio pi grande, lo acquister anche.
👤It looks great on my wall. The double face tape was easy to install. The rubber on the hangers helps to prevent scratches on controllers.
👤La staffa fa il suo dovere egregiamente. davvero is not a male.
There are 2 pieces of rack. There are no Headphones, Game controllers, or other items for display. The rack is flexible, can be bent and open wide, and you can fit your controller in it. No scratches with rubber protection. The rubber is wrapped around the hanger. Self–Adhesives are easy to install and are used on a variety of surfaces. Without punching, it is easy to install with self-adhesive super glue. The Universal Game Controller HOLDER is suitable for your most old and retro controllers. It works with many game consoles and PC game pads. You can expand or grip the branches to fit your controller.
👤Behind the tv well is where I keep my remotes. It holds its shape well.
👤The pieces were not used to mount the actual holder to the wall mount.
It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc. Universal controller holder with screws and glue for the most of video game controllers and headsets to be wall mounted for display and storage, mount to a desk, a wall, PC, shelves, cabinets, glass surfaces, rear of the TV/ The double function of the folding front plate is to comfortably support your controller for display and storage. The front plate hinge design closes when not in use to allow a sleek fitting wall mount. Choose what fits you and it is easy to install and mount your gaming controllers for a more secure replacement. OIVO's wall mounts help with easy storage while also displaying your valuable controllers and Headsets. With easy installation you can display full collections with your own designs. The controller wall mount includes wall anchors, double-sided tape, and hard plastic for long operation life.
👤There is an update (11/1521). While they stood up to the 3 older people, they were no match for the 1yr old terror who pulled them out of the wall in record time. We had to move them to a random area out of his reach because kids have to ask permission to use the controllers. The ones I put in my room are perfect, no issues have arisen since they were installed. I think they are great for older kids who can take care of things but not younger ones. The original review was original. At first glance, I don't think I'm convinced. I read the negative reviews and they are thin and don't feel sturdy. I decided to try them since I was looking for a less expensive brand. We used the dry wall anchors with the screws to screw this into the wall. We had them up for a month and have been very pleased with them. I have 3 kids that play with controllers and they are rough. The controllers were pulled off and smashed back on by those who were done with them. I will update if I have any issues with these.
👤36 hours up. They work well. There is a I placed a separate order for a 4 pack and a 2 pack. If you want to drill them to your wall, you'll need the holders with screws and anchors. The mounting hole for these on a flat wall or furniture has been cut out. I mounted these on my shelf next to my tv. There were several 3M brand and no-brand pads in the box. The 3M brand ones fell off within a few hours and I re-stuck them with the no-brands. These are used for PS4 and Switch Pro controllers. I am going to add some padding to the cradle to give it some grip. The padding would help keep the controllers in place. There is a Otherwise a great purchase.
👤I bought these for the purpose of sticking them on the side of my desk, but it still peeled off within a week. I tried another one of their spare pads and had the same result. If you're able to drill holes onto a mounting surface, these work well. I'm not the only one who has a problem with the included pads. I'm going to try and save the product by using some spare 3M tape in my drawer, but I'm not too impressed with it. It's a shame that double-sided tape shouldn't be a priority with these holders, because it has a very solid design.
👤When I got a Nintendo Switch for my birthday, my desk got overrun. I only had an Xbox One controller for my PC games. I had to do something with the Switch and Pro controller added. I mounted the 1/6 on the wall next to my battle station after cutting it in half. This was exactly what I was looking for, and I intend on staining the wood later. I deducted one star from Adhesion because it didn't stick to the wood as well as I expected. I didn't want them to be stuck to the wall.
This low-profile headphone hook is designed to match the rest of Kanto's premium desktop solutions and brings you one step closer to achieving that minimalist style you've been craving. A dual game controller holder and phone wall mount. You can wall mount your game controller. There is only one wall mount that holds controllers and headphones. It works with PS4 and PS3 game controllers, as well as most other third party controllers. It's good to hold most headphones of any size. The stadIUM segway is a must have for your gaming setup, it keeps your gamepads organized and looks good. SECURE INSTALLATION Their dual controller holder can be installed on desks, shelves, cabinets, glass surfaces, rear of the TV/monitor, and many more. VHB is used by GoPro to secure their cameras during extreme activities so you can be sure it won't let you or your controllers down. The max weight limit is 1.5 kilogram. Hang your controllers out of the way so that they are not in the way and keep your game space free and organized. One holder for all is designed to hold your game controllers and headphones in one place.
👤I put this on the wall next to my futon, but forgot to put my controller and headphones on.
👤It was made on a 3D printer. Within 24 hours, the glue attached to the pre cleaned surface failed. The 3D printed material broke apart. It's complete waste of time and money.
👤After a few days of using it, I really like it. It has an annoying flaw. It can hold up to 2 controllers and your headset, that's what I was interested in. I tend to get up a lot. If you have a controller on the lowest rest, I put my headset down a lot. Every time, the headset will hit it. It doesn't matter which controller it is, the headset will hit it. I can't use the lower controller rest because I've had it fall a few times. I'm wondering if it was worth it to buy this one or if I could have gotten the one with just a single controller rest. I think I will cut out the second rest. If the angle was different or if the head rest part had more room to spare. This would be a perfect score. Everything else is great. The command strip is stuck to my desk and it feels sturdy. If it had more room for the headset, it would be a perfect 5.
👤This makes everything look organized and saves a lot of space. I had to drill a small hole and insert a nail into the wall near the top to make it sturdy, but the controller hides the nail. You wouldn't know if it is 3d printed from a few feet away.
👤I bought two of these for my husband as I was unsure if he would like them. The glue is very strong. When we were adjusting to his likely, it did not peel the paint and we have been holding two remotes and a pair of headsets.
👤I bought this for my husband because he likes gaming. He tried to remove it after he hung it up. It ripped the paint and a chunk of the wallboard. We had to rip off the glue and chunk of the wall so we wouldn't have to hang it again.
👤Didn't realize it was bad. Does not look good. I wish I'd known that before buying. It's hard to tell in the pictures. It should be stated in the description. There is a Injection molded one would have been better.
👤I use mine for my head set and glasses, but always close by with my headset for laptop and music. There is a Good quality and sticks to side. There are three shelves for the head set. It was perfect. It's a good thing.
👤I like this product, but it is not what it states. It is false that it sticks to everything. It doesn't. It was stuck on to a wooden surface and fell off. It had to be stuck onto the wall. It has never fallen off since.
Headphone game controller holder products from Pmsanzay. In this article about headphone game controller holder you can see why people choose the product. Oaprire and Doyo are also good brands to look for when you are finding headphone game controller holder.
Pmsanzay, Oaprire and Doyo are some of the best brands that chosen by people for headphone game controller holder. Find the detail in this article. Evecobo, Brainwavz and Yamazaki Home are also brands that their products are worth to check.