Best Headphone Hanger Under Desk Screw

Desk 26 Jun 2022 10+ Comments Open

1. Enbiawit Headphone Headphones Headset Mount Installation

Enbiawit Headphone Headphones Headset Mount Installation

Universal under desk design allows for a near universal fit on most desks. There is a new word for it. The Spring Clamp is easy to remove. Not only for storing all kinds of headphones, but also for headsets, glasses, and bags. The Wall Mount Hanger is made of a soft, non-abrasive plastic with a sturdy internal frame and will not scratch your headphones. It is easy to install with included screws. The holder can be mounted on any surface you want. Small design saves more space. The holder is made of a material that is light. The headphone stand has screws that hold it in place. It's suitable for all kinds of headphones and earphones, such as wired headphones, wireless headphones, PC gaming headphones, TV headphones, wired earbuds, wireless earbuds, and wireless earphones. It can be mounted on any flat surface you want, such as desk legs, cabinets, shelves, wall and glass. It can be mounted on any panel. Such as on a desk. Clean the surface by using wipes.

Brand: Enbiawit

👤I like this product. The hook is mounted to the wall. I have it to the left of the white wall switch. There is a The hook is large enough for any headphones. Simple white hook design looks nice mounted to the wall. There are holes for the anchor in case you need more. I was worried that the hook would be too small for Airpod Max, which is a sort of wide mesh top. It's a perfect fit, but can probably fit any other headphones. I don't use the feature, but I like that it has additional holes for holding airpods or ear buds. All in all, what I wanted.

👤I use a HyperX Cloud Stinger for work. I have an ikea desk. I stuck it to the side of the Alex drawers. It feels very sturdy and holds up well. I'm not going to pull this off unless I pull as hard as I can. There is a The HyperX is wireless, so I don't have cables to mess with, but it looks like you could wrap the cables around the front lip of the hanger. There are slots where you could keep earbuds. All of them were very happy with my purchase.

👤I got this for my headphones. I wanted to keep them away from my son. I like the idea that you can use this to store a variety of headphones, including gaming headphones, airpods, tv headphones, and your regular music headphones. I think my only complaint is that the 3M glue that I used on my wall did not hold up as well as I would have liked, the part that was sticky stayed on the plastic and the rest of the glue was on the wall. I tried applying the command strip to the sticky part but it didn't work. I was able to remove the sticky part from the plastic and get the glue off the wayy with no damage or problems, and I placed the command strip on the plastic to the wall, and it has been up there with no problem. If you're going to purchase this, you should take into account something, like command strips. I need it and it works just as I need it. My headphones are out of the way now.

👤My desk is not cluttered because my headphones are held for work. They are a good purchase.

👤It's very easy to install and fit, I screwed it into a stud and it's not going anywhere.

2. Gamital Headphone Stand Stick Aluminum

Gamital Headphone Stand Stick Aluminum

The best choice is the headphone hooks. There are double methods to install all gadgets. The best way to cut down oncluttering is with a headphone stand. The model has a dual headphone holder that can be turned into a rotating sphere. The design makes the clip easy to use and looks great when holding your headphones. All kinds of wired and wireless headphones can be held under your desk with the stick-on 3M VHB. Non-Abrasive aluminum cover is compatibility. It is easy to remove the screw clamp. It is a strong headphone Hook because it can hold PC gaming headsets without bending or breaking. Installation with screws and a rotating ball plunger can be adjusted to fit under tables. padding should be on the arm or hook that will support your headphones. Easy to install, do it yourself structure. Maybe you don't have any ideas to create a proper headphone stands, but the headband is compatible with all aluminum alloy stands. If you take a review from their store, you can start packing up your items in a well-organized manner. Can Mount Anywhere is a versatile design. Those who ran out of space or are simply looking for pure efficiency can use the economic solution of Gamital Design. One of the best headphones is simple, modern and economical. If you have too much stuff on your desk and no room to spare, you can just put your headphones in the drawer and forget about it. There is a lifetime warranty for quality issues. They're confident in their design and quality and their goal is to improve office efficiency with gamital fitting. The store provides 7 hours. There is a local technical support and satisfaction guarantee. Buy it. Enjoy a high-quality product.

Brand: Gamital

👤Work threw out some motorized sit-stand desk frames so I was able to build my wife a desk that was a surface. I bought a butcher block from the hardware store, mounted it, and bought accessories to make it more functional. It would be nice to be able to hang headphones under the desk and use a magnetic charging cable to keep them charged when not in use. There is a The stand is very functional and looks good with the heavy aluminum. I didn't bother with the glue because it wouldn't work unless the desk is very smooth and won't adhere long with frequent use.

👤I put my headset on the underside of my desk in order to clear some space up top, and then I put my headphones on the underside of my desk to have better sound and ear pads. It's easy to put a couple of screws in if that fails.

👤The 3m sticks well. It doesn't budge. Don't worry, watch the video. The headphone hanger is able to change direction with no issues and this is what distinguishes them from the other offerings. There is a Every single detail is taken care of.

👤It works well and gets the job done. I wanted a small mount that didn't take up a lot of space, and this one was great. I only used the backing, not the screws, and the ashesion level is still great, even though I only used the backing. It feels more sturdy because it is metal as well. I am happy with my purchase.

👤I was really annoyed that the shipping took longer than it had said. I gave it to my dude for his office and he uses it a lot.

👤My Steelseries 9x headset has a great hook. The glue on the other hand is terrible. After a week away, it came back to them on the floor. For whatever is worth.

👤The construction feels solid and the parts move very smoothly. I like that you can change the hook and out locks at 90 degrees. I can't say how good the backing is because I screwed it in.

👤The stick hanger is made of high quality aluminum. The material is tough. The anchoring 3M sticky is easy to bear. It's a good design for me, it offers two ways to mount under the desk, slide to another side and use screws. It's really a simple, funcitonal, extremely effective space saver hanger.

3. BRAINWAVZ Headphone Headphones Headsets Accessories

BRAINWAVZ Headphone Headphones Headsets Accessories

Don't talk about your feelings: DeCLUTTER your feelings. The Big-J under-the-desk headset hangers can be used to clear up space on your desk and shelves. The headphone stand is made with high grade plastic and 3M VHB tape and can hold even the heaviest of headphones with ease. There is a phone stand and a cellphone holster. Smaller than a stand, it's more resistant to damage than other stands. No mess, no screws, and no need to remove the red VHB tape cover, you're good to go.

Brand: Brainwavz

👤There is nothing wrong with it. It wasn't disclosed. You can see the 3D print lines on the surface. I am ok with it, just tell me about it.

👤I don't like buying a product that is 3d printed and doesn't show you the crappy lines running down the hanger. I hate cheap 3d printing that's being done in someone's garage, but the hangers is surprisingly sturdy and easy to use. If you put it in a more visible spot, it wouldn't look good.

👤My son's headset can't always be found on his bed or floor. It was a waste of money to put them under a shelf next to his bed. The glue is strong. We tried to move it to a different location, but it's stuck where it is. I think that's correct.

👤The stand is strong. Before placing the stands, I suggest to thoroughly clean the surface area. I put these under my desk to make it look better. Would buy again in the future. The items are low price will definitely recommend.

👤The initial sticky pad was strong, but I knocked it off with my knee. I stuck the sticky pad back on my desk after the hook came off. Good purchase.

👤It was very easy to install. I was hesitant at first but I am very happy with how things have gone. I like to keep my head seats hidden because I use a corner desk for gaming and work.

👤I was skeptical about the ability of the hook to hold things. It is pretty awesome after a few weeks of use. I put my headphones on and off all day.

👤These are clearly 3D printed, but they do the job you expect from them. Before you peel those strips, make sure you know where you want them and test them. It is a bonus if you get two. I have two hanging points, and they are both great. I don't know what the purpose of the smaller hook on the back side is but I've used them for my Sound Buds and they work for any in ear sports headphones which are wireless but have that "neck cable" for extra security. I would recommend it to a friend.

👤The little 3d printed underdesk headphone stand is very simple to use and has a cable tidy hook on the back which I use to tuck away my charging cable for my wireless headset. The metal band can sit atop the lip with the Arctis 7 being too small for it. I am very happy with this cheap stand.

👤I don't understand the reviews that say it's not sticky enough. What are you trying to do? Is it ice? The product is of a high quality. Unless you pull incredibly hard on it, you won't move. If it's installed correctly. What I was looking for. Don't be hesitant if you decide to buy this.

👤Absolutely brilliant. I hung my headset under the edge of my desk. Has done the job well.

4. Headphone Link Dream Organizer Headphones

Headphone Link Dream Organizer Headphones

The Link Dream is a dual headphone and cable clip organized stand that can hold messy headphones and support two headphones at the same time. The headset holder underside desk can be mounted with screws or 3M VHB tape. This small headphone hook with cable clip is small enough to fit in any desktop space, giving you more space and keeping your desk organized. It's compatible with all wired and wireless headphones. The hanger could be used to hold other things. Link Dream can be installed almost anywhere, it has a 3 year warranty. If you have any suggestions, please do not hesitate to contact them.

Brand: Link Dream

👤Everything as promised. The aluminum material works. Comes with extra sticky pad. A wipe to clean your surface before sticking to the device. There is an extra screw. How respectful. There is a If you plan to use it on a surface, you should get your own screws because the included ones don't work. Yeah... The head of the screw falls through the hole. I'm not sure how they let that one get by. Every screw is the same. I had screws for door hinges that worked well. smh... It was so close to perfect. As long as you weren't planning on relying on the included screws, it's ok.

👤This is a piece of aluminum that is shaped to hold headphones. It does well in this task so far. My only question is if there are 2 screw holes where you stick it to the desk or shelf. I'm not an expert, but if you don't have a small right angle screwdriver, you're not going to be able to attach it with screws. The design would have been better if there were no holes. I'm happy that it's holding for the time being.

👤A very strong hangar. It's small for my high end headphones, but can fit one on them without the other hanging off the edge. They fastened it tightly to the bottom of the desk and have no worries about it coming loose. I don't want to risk putting 2x $200+ headphones on just double sided tape, but I also don't want to risk dropping $400+ worth of headphones for 40 seconds. There is a Why 4 stars if you liked this so much? Again, too small. They would be perfect if they were 12 taller and wider. The build quality is great.

👤The screws the manufacturer provided were too small for the holes. I decided to screw the hanger to the underside of my desk because I didn't want to use the double sided tape. The screw heads were so small that they slipped through the holes. I had to dig around in my own collection of screws to find an appropriate size for this holder because there was no way I could use the supplied screws. There is a The holder is worth 5 stars, but I only give it 3 stars due to the incorrect screw size.

👤I initially bought this to hang my PS4 headset on the coffee table so that it wouldn't get in the way. I bought another one to keep my headset out of my desk. I'm going to buy another one so I can use it as a purse hanger instead of leaving my purse on the desk. This little tool is helping me organize my home.

👤I love getting things like this. It is simple, sturdy and does what it is supposed to do. The glue is strong. Once cured, this thing will not budge. Before you adhere it, make sure you set where you want it. I love the texture of aluminum. I don't use the little notch for the wire since I'm using wireless headphones, but it's nice to have it if I ever hang some on there

5. Headphone Headset Hanger External Earphone

Headphone Headset Hanger External Earphone

Stereo Monitor Input with Blend Control. The under-desk headphone stand has a 3.5mm AUX audio port and a simple way to plug in your headphones. The hub is not designed to charge devices. You can install it with a screw and 3M VHB tape. All over- ear headphones are compatible with Universal Compatibility. What? You get a COZOO Headphone dock with audio port, 5ft date cable, and a 30-day money back guarantee. If there is a quality issue with this headphone rack, please contact them.

Brand: Cozoo

👤While it lasted, this was a good product. There is a The quality of the glue is good. I had to add glue to the mount so that it wouldn't fall down since my Corsair headset wouldn't fall down. If you're using heavier style headphones, think about using screws or glue instead of glue. I bought this back in March of this year, but it wasn't until November of this year that I was able to plug into the bottom port. I would not be able to tell what was wrong unless I pulled the entire mount off and opened it. There is a I moved on. I had two working devices on this. I wasn't affected much. There is a I couldn't plug into the middle one. The off-set was obvious. This was just a headset mount. I was not happy. There is a I plucked out the module after priing it off. There are two versions of theusb, version 1.0 and version 2.0. The metal brackets and solder welds on theusb 1.0s were bent by the amount of plugging and unplugging. This is a piece of junk for me because I don't solder. You can see from the photos that theusb that DIDN'T break is a 2.0. Bigger house. Tougher. I'll be looking for that in my next mount.

👤The whole package is pretty good. There is a The unit, 3 foot extension cable, and 3 cable management hooks are what you get in the box. Holds my gaming headset, gives me 3 extra ports, and keeps my wires well organized. It has not fallen with the 3M strip. There is a I will be nitpicky just for COZOO's sake and mine. First of all. One of myusb ports is flipped. I can live with it. I wish I didn't have to remember the orientation to put it in. My cables are falling out. Since there are no circular catches to hold my cables in, I have trouble keeping them on. A new design will be implemented in the next iteration.

👤After a couple of years, this cheap faulty product stopped working for me, but before that, one of the ports stopped working early on, and it had issues like rapid disconnection/connection over and over again. I only used it for flash drives, not high power draws or anything like that. My policy is to contact the company to give them time to make it right before they leave a negative review. They told me that since they don't keep purchase records for more than 2 years, they couldn't replace this piece of trash. There is a I will steer clear of any and all COZOO products in the future, and recommend anyone that reads this to do the same, because this company does not stand by their products.

👤I didn't bother trying to mount this with just the strips. While the strips on mine were 3M branded and not especially heavy, placing and hanging headphones from it everyday is more than I'd trust to any glue stuck to the bottom of an Ikea desktop. There is a You won't be disappointed if you use the provided screws. After a month of solid use, mine is sturdy and not showing any signs of wobbling. There is a There's nothing to complain about with the headphones and hub. I'm getting full transfer speeds from my fastest cards, so the ports and cable are up to the claimed spec, using a UHS-II card reader. There is a The quality of the headphones jack is a nice surprise, as is the onboard digital to audio converter included in the hanger. It's not strictly speaking accurate, but it's loud and hot and is enough to power headphones with bigger, more power hungry drivers, like the AKG studio cans I use for video editing. It's not perfect fidelity, but it doesn't introduce excessive distortion or increase noise floor noticeably, and what's there is easily adjusted for in an EQ program. The sound quality and volume out of this thing was my biggest concern, and this is way better than I thought. All in all, very pleased and would recommend. It's not going to be as good as a dedicated DAC, but it is an all-in-one solution for mounting headphones on a shorter cable, a fast card reader, and a Windows Hello fingerprint reader.

6. Headphone Headphones Adjustable Universal EURPMASK

Headphone Headphones Adjustable Universal EURPMASK

Customer service is great. Give it a try. You can return it within a month if you don't like it. They will send you a new one if it is faulty within a year. Universal under design allows for a near universal fit on most desks by attaching a thin, narrow, and thick piece of metal to them. It is easy to remove the Spring Clamp. The audible headphone arm swings underneath your desk for discreet and non-intrusive storage and swings back out for easy access. BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Soft rubber pads are located on both ends to protect your desk or table from damage. The under desk mount is convenient for storing. Easy installation of a springed C Clamp.

Brand: Eurpmask Choose The Color Of Europe

👤We needed a better solution to keep our headphones from breaking and this was our answer, it's very sturdy and feels very well made, it's even better if you have an xbox one controller, it's even more perfect. My purse is probably around 10 lbs. I'll probably order more for myself and gifts in the future. Highly recommended.

👤The hook portion can bend if you put a lot of weight on it and it is very cheap. There is a The head doesn't lock up. The clip is not tight enough to prevent desk steps that are less than a quarter of an inch from moving. You can get a Brainwavz Hengja Hanger for the same price that has better construction quality. I would've gotten a second one, but I got this instead when the page from my old order suddenly said out of stock and started directly to a screen protectors. I wouldn't buy it again. Cheap, poor construction, plastic bends, top sticks up a lot. A bad product.

👤It's easy to put my headphones out of the way. I didn't want one where you have to use glue or screws. You don't need a heavy duty one if you have light headphones. The mount has a sufficient amount of space. The desk is protected by the padded clamps. The mount has a hook so you don't lose your headphones. You can choose which direction you want to hang your headphones. The cord clip is nice, but it's stiff, so I just wrap it around the hook and grab my headphones when I need them.

👤This thing is great. I was embarrassed that I didn't think of getting this a long time ago, but I did not know it existed. Maybe it didn't. I am a recording artist and I use expensive headphones. They were not taken very well care of in the past, as they would flop around on various surfaces. The device is easy to set up and I like that the hook can be changed to hang things or not. I think it's a good deal so that I can get another one for my other cans. I recommend this to anyone who wants to protect their investment.

👤It was easy to put in place. I got this because I was sick of my headphones laying in random places. The hook is neatly underneath. The picture doesn't show it, but there is a small loop for a cord to go through so I leave my charging chord handing from there so all my cords are close together and easy to manage. You can put the headphones on the hook and swing them out of the way under your desk. I put one on the side table for my headphones.

👤I didn't expect to write a review on this. I thought I knew what I was getting. This is a cheap, easy to scratch plastic. The cable clip would be better not there. The only. The mechanism for twisting the hook into different positions is a nice thing about this. You only need to rotation from 90 degrees and 180 degrees. The hook is pretty loose and you can position it anywhere from 0 to 180. I would have given it a pass, but the junk quality means it should be a lot cheaper than other METAL items. It would be a good deal at five bucks, since I got it for twelve ninety nine. If you don't know better, maybe eight. No way in over ten. I'll probably keep it because it's not worth it with the Pandemic. It will have to do.

7. 6amLifestyle Headphones Headset Holder Headphone

6amLifestyle Headphones Headset Holder Headphone

It's simple and elegant, and makes your headphones well-displayed when not in use. Make your desk tidy by freeing up your space. The Silicone pad and aluminum headset stand are made of anti-scratch material. Two mounting methods with a strong Adhesive tape or 2 screws are easy to install and look good in any setting. Headphone hanger mounts can be used on a wide range of surfaces. There are under desks, tables, shelves, wall cabinets and shelving units. It's compatible with all kinds of headphones, such as wired headphones, wireless headphones, children headphones, gaming headphones, TV headphones and so on.

Brand: 6amlifestyle

👤I use this to hold an Arctis headset. It hangs in front of the tower because it is attached to a desk. I didn't use the glue. Pre-drilling holes into the desk is recommended if you are attaching with screws. I like the subtle shape, the slight grip of the silicone pad, and it could comfortably hold a headset larger or smaller than mine. There is a The flat plate on the top of the desk is something I would change. I would like to see an alternate model that was larger and more similar to the one on the desk. You install the two screws, then slide the mount on and pull it forward. If you put it from the front you risk it sliding off the screws. It's not a big deal. It's not an optimal design choice, I see why they made it that way. There is a I'd buy it again if I needed a similar setup.

👤The screws broke. Not my fault. There is a The design makes it difficult to get the screws into the desk. The screw tip fell off after the holes were set. It was so weak that it broke into metal powder. I show photos. I had to dig into the wood to get the screw out of my desk. I show normal screws for comparison. The screws are narrow to get the mount to work. I gave up trying to adjust my other screws after about 20 minutes because they were too large. I would use glue, velcro or glue and glue over the garbage mounting options they give you. There is a The rubber part covering the hook is of good quality. Good quality is probably the only thing that's good in the unit. The metal is painted so lightly that it will chip easily. I scratched one side before putting tape to cover it, like I screwed for 2 seconds. If you want to install screws, please put tape on the edges to avoid scratches, but you can use a Sharpie or paint markers to touch it up. I don't think the metal will break like the screws. They dress up to look nice. The reviews here are not critical of what you're actually getting. It would cost about 10 cents to make in China. It's a better design if you want an under the desk hook, not on the side of the desk. I would have returned it for the poor quality if it had cost more.

👤It was really solid. Glad they use 3m tape, it works better than most others. I attached it to 2 sides and it barely moves, so I can put a lot of force on it. I use padding around the band. It fits with what would be recommended. The desk is black. Make sure you clean the area before applying and if possible mount in a corner where you can take advantage of both mounts. When mounting, make sure you press down hard. Press down on the flat surface to make sure the mount is properly adhering to the headphones hook. Many people forget to do that with 3m tape.

8. APPHOME Headphone Aluminum Accessories Headphones

APPHOME Headphone Aluminum Accessories Headphones

The CVC 8.0 noise-cancelling microphone is built into the headphones and brings a brand-new calling experience. You can feel the pleasure of a face-to-face conversation. The 2Pack Headphone Hanger can hold two sets of headphones at the same time. Home Office use of gaming accessories. It's made of aluminum and can hold small to large headphones without bending or breaking. Double methods to install hold under your desk surface with strong tape. If you want, you can mount with screws for extra strength and security. It's ideal for home, work, school or cyber café, and it's space-saving. It's compatible with all gaming headsets and headphones. It could be used to hold other things.

Brand: Apphome

👤I intended to mount it using screws. If heat/humidity isn't favorable in your situation, it can be problematic to use solely adhesive. You get an extra one if you have the unit already on the mount. I didn't want to go through the process of removing the glue. I had to peel off the backing to mount it, but it was so difficult that I had to remove part of the mount. It's not clear if that would jeopardize the attachment's strength. I would rather that they don't put the glue on the mount and just let you make your own decision. If you were to use screws with the glue on, the provide screws are too short to have much left inside the mounting surface, which could lead to a failure.

👤I mounted the headset holder to my work desk using the two small screws and the glue already attached to the holder. The holder is elegant in appearance, style and form. The grey color seemed to be compatible with my color scheme. I like that an additional strip is included if I want to relocate the holder, however I wonder if most people throw the additional strip away. I think it's a tough call, maybe most people throw away the two screws. I don't think the mount can be held to any surface with the help of the glue. I put the mount in one location, then realized my screws would need to go through a metal brace, and pulled the mount off the table in order to move it. The screws are difficult to fully tighten without stripping them because of the difficult angle between the base of the mount and the actual hooks, according to another buyer. I agree that I would have liked to have been able to screw the screws into the surface from a different angle, but I didn't have to. The screws should be slightly longer for thos angle. The small screws seem to be enough for the mount to remain attached to my table. While my headset is not heavy, I occasionally bumped the holder and it still held up.

👤The features that made me pick this particular hanger over competitors' product were the beautiful design, superb finish and the options of attachment. Usually, I prefer to mechanically attach hard goods whenever I can over attach them, especially hardware such as brackets, hangers to be surface mounted, and intended to carry a load of reasonable weight indefinitely. I chose this product because of the high performing 3M glue that I could use to place and hold the hanger, and also because I could pre-drill through the factory mounting holes before I screwed it in. It looked like a walk of an install. I used a conventional pistol drill with the smallest drill bit I could find. I had to drill my pilot holes at an angle because of the shallow space between the mounting plate and headset base. When I tried to screw in the smaller wood screws, I found it difficult to maintain the same degree of angle with the screws into the pre-drilled pilot holes. I will change my technique for install #2 so that I don't have the same situation again. The combination of high performance adhesive and two factory engineered mounting holes means that your hanger is going to be there forever and probably as sturdy as the day you installed it. The basic provisions make it easier for a change to be made. Quality engineering of a quality product for anyone who still appreciates quality hardware. Thanks! Drew.

9. 6amLifestyle Headphone Organizer Universal Headphones

6amLifestyle Headphone Organizer Universal Headphones

Keep your headset's cable in place and prevent it from dragging on the ground, that's what the upgraded version of the cable holder says. You can keep your charging cables in a safe place. Keep your desk clean. Practical and convenient! It's great for home, office, classroom. Save space with the foldable arm. The arm can be folded up when not in use. When folded, it is smaller than your palm. Save space! The rubber strip on the raised arm keeps it folded. There are no worries about the adhesion. The rubber pads are attached to the ends of the clips to protect the desk surface from scratches. The desk can be mounted within 50mm. Also fit cabinets, shelfs, and glass flat surfaces. Excellent quality, no damage to the leather. The rubber pad on the headphone hook is arched. The holder has a 3-inch arm and is ideal for both wired and wireless headphones. It's also suitable for backpack, purse, umbrellas and so on. The headset stand is made from metal and can support up to 11 lbs. 60-day money back, 12-month warranty. They are confident in their products. Please contact them if you have any questions.

Brand: 6amlifestyle

👤You think you don't need this product until you buy it. I don't like having to put my headphones in a container every time I use them, and I don't like having to take them out. I didn't like leaving my headphones out to collect dust and suck up space inefficiently. I decided to give this product a try. I love it. It's simple, elegant and very versatile. I was worried that it wouldn't fit on the front side of my desk. It was easy to fit to the legs of my table because you can adjust the hook's direction. It will still collect some dust, but it will be less than under something. This product is great for anyone looking for storage items.

👤I didn't want a stand on top of the desk as there was not enough room for one without my desktop getting crowded. I was looking for a hangar that I could hang on the inside of the frame, so that it wouldn't stick out to pedestrians. There is a This hangar is perfect. It seems to be well made and sturdy, has pads so as not to damage the desk frame, and it has more than enough adjustability to accommodate thicker desk frames/tops. I like the clips to hold my headphones, it's nice to be able to roll it up and stick it in without having to worry about the wire getting loose. There is a My cable-managed PC station has a new addition.

👤I bought a new headset for my computer. I picked it up. The rubber coating on the ledge helps keep the headband from sliding around. It has a lip at the end that helps to keep your headset from sliding off of the end. I had a similar stand for my headset, but it didn't have either of these features. I decided to replace the stand for my console headset after I thoroughly enjoyed the new one. I like that the stand can be folded up when not in use. I would highly recommend this stand if you were thinking about getting it.

👤I attached this to the leg of the table that I use for my computer desk to free up space for my headphones. I like the fact that the mount can be turned so that it can be mounted vertically or horizontally. The screws/screw holes/allen wrench are not up to snuff. The allen wrench takes a little work to get into the screw heads, and the screw holes seem to be off-level. The screws are not in a straight line regardless of orientation. It is very odd. I am able to change the orientation of the mount without a problem, and once mounted it is not coming off the table's leg until I remove it. I am very satisfied that it mounts firmly. It's probably too much for the headphones I am using, but that's not my main concern. I'm happy that I can keep my headphones plugged into my computer and have them tucked away, so I can use them whenever I want.

10. APPHOME Headphone Rotating Universal Headphones

APPHOME Headphone Rotating Universal Headphones

Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers and shelfs. It's great for hanging game controllers, cables and other gadgets. The APPHOME headphone stand can be hung on to most desks, but only if they are 45mm thick and 5mm wide. Not only for storing all kinds of headphones, but also for headsets, glasses, and bags. The under-desk headset stand is a great place to keep your heavy headphones with its rotating neck. You can change it to any direction. Swings underneath your desk for discreet storage and swings back out for easy access. The hook supports all sizes of earphones. Make your desktop more tidy by using the under desk headphone hook with a headset cable organizers. It's a good idea to hold your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. It is easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or table from damage. The PC gaming headset holder for desk is made from high quality aluminum and can hold headsets without bending or breaking, making it a strong headphone Hook. Please contact them if you have a problem.

Brand: Apphome

👤This is a good thing because it keeps my headphones off my desk and out of sight. I like the range of motion because it made it easier to reach my desk. I had a smudge on my desk, but it was easy to wipe off with my sleeve, and it could also be cleaned with a towel. There is a The product branding on the side is ugly. I don't think anyone will check out my desk, see the logo, and say, "Woah, you got an APPHOME hanger?" I need to get one of those!

👤The screw is easy to loosen and tighten for a non-damaging attachment to any desk, it is made of metal and has a soft rubber feeling. I have only had this for a short time, so I will be interested in how it holds up, but for now it is perfect.

👤This product was one of the accessories that I needed to complete my new L shaped desk for gaming. It was easy to install as you just have to loosen the screw and it will fit your desks width. I have a glass desk. padding is added to the screw so that it won't scratch, for instance like mine, glass, metal and wood! The little opening for wires is something I love. This is a great headset holder and it's an awesome price.

👤I bought this item for my husband and me to clear out some of our desk space. I place my headphones wherever I can find them on my desk when not in use. They are out of my way when I need them. It's a small thing, but important to me.

👤I researched different designs before buying this. I like how this is strong and mounts almost anywhere, so you can move your headphones. They don't protrude. The rounded padding doesn't hurt your headphones. The dual headphone hanger version works great for me.

👤I found this perfect as a headset holder that can be put on your desk. The rotating feature makes it possible to have the headphones under the desk rather than out. The quality padding on the holder will prevent any scratches on the headphones. The cable organizers are nice to have, but I don't personally use them. The build quality is very good. There is a The build quality is very clean, sturdy, and polished. I'm very happy with it.

👤I don't like to drill things to the table and double-sided tapes have their limits. I preferred this as a single solution and so far it has been great, it does not tilt, looks good, and the infinite screw appears to be of an excellent quality.

👤I would buy this one again if I needed another stand. I have it hooked up to my desk. You can easily change the hook.

👤Aunque parece un artculo "capricho", la realidad es ayuda a darle ms vida. Mis Shure de cuero ahora ya estn colgados.

👤Producto, fcil de usar.

👤Aluminio se ve y siente a la hora de colocarlo.

11. Headphone New Bee Organizer Headphones

Headphone New Bee Organizer Headphones

The under desk holder is made of high quality metal and is strong enough to hold two sets of headphones at the same time. It is easy to fit different table and shelves or any other horizontal panel with the bee stand, it sticks firmly under your desk, and it is also strong and easy to install. The cable mount design makes it easy to reach your headphones, keep your desk tidy, and hold the gaming/wire headphone cable. Installation is virtually anywhere - on walls, cabinets, glass surfaces, monitors, desktop towers, game consoles, etc. There are multi-purpose hangers. It's great for hanging game controllers, cables and other gadgets. 1. Before attaching, clean surface well with provided wipes. Allow 3 Before using the holder, the M glue needs to be set for 24 hours. 3. It is not suitable for use on wet, greasy or dusty surfaces. 3 year warranty is ensured. Professional technology team and 24 hours customer services.

Brand: New Bee

👤The headset hanging on the hook is not to scale. It's a bad job that makes the size of the hanger appear smaller than it really is. The text on the bottom of the photo says "New Bee". I was looking for a hook with a minimalist appearance, but instead got something with a ridiculous brand name printed on it.

👤I decided I needed a place to keep my headphones out of the way. There was an alcohol wipe, 3 screws, and an extra sticker. I was able to hang my HyperX Cloud Stinger and Sennheiser headphones on it without any issues. If you have cans with a wide headband, I'd be careful to check if they fit on this. I like the small notch on each side to hang the cord so they're not just on the floor. There is a If you're using the screws, mark the screw holes with a pencil and line up where you want this to go first. Before you make holes, you need to take the screws out and screw them in. The screw holes are blocked by the hooks, so it will be a lot harder to start.

👤The thing is 5 stars for money. It is easy to install. I used the strip that is made from the same material as the one you need. I screwed in the 2 screws to make sure it sticks. The only criticism I have is that the lip is too short. I have attached it to a HifiMan Ananda which stays put since it has some weight on it, and then I have a cheapo Sennheiser headset for conferencing. The headset is easy to knock off into the floor. It happens all the time, so I don't replace it on the hanger anymore. A little more lip on the end would probably solve that problem. If it was longer, the big headphones wouldn't cause it to fall off.

👤This is what you should expect from a $10 hook. The metal is strong. After about a week of use, the hooks are still wide enough to hold my headphones and headset. I took one star off because I understand that it is difficult to get the screws in. The hook blocks your screwdriver from being able to insert the screws straight on. I used a drill bit to get the screw-holes started, and then used a long screwdriver to get the screws fastened at a 45 degree angle. It's not completely flushed, but it seems to hold up. 5 stars if you have the right tools.

👤I bought this to hang my daily driver, the Sennheiser HD6xx, and my daily driver, the Sennheiser HD579. It was easy to install and work well. The desk I use for my computer is a basic Ikea desk with a wooden top and 4 legs. It was easy to get the screws to go into the material, and then hold the desk tightly with the help of the glue. They give you a second glue so you can remove the screws and re- apply the hanger to another location. This thing is a steal and it works as well as the other ones. If you have two headsets, I recommend you grab this one. 5 stars!

Summary

What is the best product for headphone hanger under desk screw?

Headphone hanger under desk screw products from Enbiawit. In this article about headphone hanger under desk screw you can see why people choose the product. Gamital and Brainwavz are also good brands to look for when you are finding headphone hanger under desk screw.

What are the best brands for headphone hanger under desk screw?

Enbiawit, Gamital and Brainwavz are some of the best brands that chosen by people for headphone hanger under desk screw. Find the detail in this article. Link Dream, Cozoo and Eurpmask Choose The Color Of Europe are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com