Best Headphone Hanger Wall Mount

Hanger 26 Jun 2022 10+ Comments Open

1. Headphone Universal Sennheiser Audio Technica Controller

Headphone Universal Sennheiser Audio Technica Controller

The package weight was 5.15 lbs. Easy access to your headphones. The long curved support is made of a soft, non-abrasive Silicone cover with a sturdy internal frame. A multi-purpose hanger. It's great for hanging cables, earphones and other gadgets. The max total weight is 1 kilogram. Clean and organized space. Installation is virtually anywhere - on walls, cabinets, glass surfaces, monitors, desktop towers, etc. You should organize and tidy up your workspace. Convenient installation. It uses double-sided tape for strong, reliable adhesion. Clean surface well using provided wipes. Allow the holder to be used for 24 hours. It is not suitable for use on wet, greasy or dusty surfaces.

Brand: Avantree

👤It worked well for a while. One day, I walked into my room and heard a noise. I was trying to figure out what fell, but realized it was my headset. I followed all the directions after having it for less than 3 months. I pressed the alcohol wipes against the sruface to make the surface clean. After hanging it up, I made sure to not use it for 24 hours. It still fell despite all that. They need a better stand. I'll probably buy something to keep it. It was unfortunate it didn't hold up. There is a Customer service contacted me saying my previous 2 star review was detrimental to their reviews. They gave a free replacement. If they think the 2nd will hold up, I'll change the review. I'm not going to change my review if the second product does the same thing as the first. They asked me to send the email back to them, after they lost the previous messages. I did. They responded with nothing relevant to what happened before. I'll take it down to just 1 star now that I know their customer support isn't helpful. This isn't worth the headaches if you buy it from someone else. There are two edits, the first one is called Edit 2. I bought my own double-sided tape and it seems to be holding up well, so it's 3 stars. Customer support is very determined to make sure I like their product. I didn't use the new one because I was expecting the same thing to happen. If you rely on the glue, then you should buy any other glue.

👤I bought this item on December 13th. The stand has begun to separate from the glue. I was expecting this accessory to last as long as I thought it would. I had thought I would get at least 6 months out of it, considering the brand of glue they chose. I always took care to place things on it gently. The back of the rubber/plastic hanger and the desk it is attached to have begun to separate from the glue that is attached to them. The stand was rated 5 out of 5 for its function and 2 out of 5 for its longevity. Customer service was 10/10.

👤I used to get different types of L-shaped things. I changed my mind after reading reviews about people getting dents in their headsets. There is a This thing is awesome. Stick to a wall and it will hold up a heavy, wireless, headset. I attached one to a desk as well. I picked up a set of two for a very competitive price and was happy to return for more, and they were even cheaper. I can't say for certain, but I can say that you get your money's worth. There is a If you feel like you have a heavy headset and need more support, you can get a double-sided mounting tape. There's enough here to support 20 lbs of weight, and 3M makes the absolute best. The back is large enough to double the amount of tape holding up whatever you're trying to hang on the rounded mount. It's cheap for the amount you get.

2. OAPRIRE Headphone Hanger Holder Mount

OAPRIRE Headphone Hanger Holder Mount

You're good to go if you wait a minimum of 6 hours and push firmly into place. The strongest version of 3M VHB tape is what they use. The max weight for lighter items is 2lb / 900 grams. Do not place on painted walls or painted walls that are painted. There is an organized space. Designed for people who appreciate quality, minimalist style, andVersatility, it keeps your headphones out of the way and easy to reach. The OAPRIRE headphone hanger is made of colored clear acrylic and has a crystal texture. The smooth edges make the headphones scratch-free and wide support surface suitable for big headphones, cables, etc. There are no holes in the wall and the OAPRIRE is mounted with double-sided tape. Walls, cabinets, glass surfaces, monitors, desktop towers, etc. Each package contains a headset stand, double-sided tapes, and cable clips, which are a great gift. There is rich content and value. If you care about style, quality, andVersatility, OAPRIRE is the best choice.

Brand: Oaprire

👤I only give it a 2 because it ruined my walls. I bought these because I didn't want to put more holes in my wall, but it would have caused less damage than using these. They ripped the plaster off the wall when I removed them. If you want a hook that isn't going to destroy your wall when removed, don't get these. These are perfect if you want a more permanent hook. These are not recommened for a temproary reason, but I loved how sturdy they were.

👤I love these! I've purchased a lot of mounts for controllers and headsets. My husband's gaming cabinent has been completely transformed by it. The command strips are so sturdy that you can slam the cabinent door with the controllers mounted on them and they won't fall off. It's very easy to attach. Installation time for all five mounts was about ten minutes, with all my measurements, but I did get a little snoozing with our specific use. I think they look sleek and modern. Highly recommended for your storage and organization.

👤I was a little worried about them adhering rather than being attached via a screw because of the order I placed. The worst case scenario was that I had to place a screw to hold them, because they are simple and nicely made. I ordered them anyways. I mounted them immediately after we received them. The glue seems to be very good and it makes them last longer. I think they would hold most of the headsets out there. They came with no directions. I was already skeptical, so I went to their page on Amazon to see their instructions on placement. The red side of the glue is what goes on the furniture, and I used a pair of tweezers to get hold of it, as it is very thin and I didn't want it to affect the furniture. I put it on and waited 24 hours before hanging anything on them, as per instructions on their Amazon page. The cable clips are working well. I am happy with this purchase. I would recommend them to anyone who is looking for a simple headset holder.

👤I was looking for a simple wall mount for my headsets and this was what I found. A relatively unknown brand, however a simple idea that was nailed here. This slid between the window and corner on my wall. There is a The mount uses strong tape. I had no fear of it falling off the wall. It has a circular cable organizers if you want to keep the wires neat. Happy with the purchase so far.

👤The Oaprire wall-mounted headphone hanger is a clever and useful product intended for anyone who wishes to have his headphones close at hand withoutcluttering his desk. The molded black plastic that makes up the two devices in the box feels very solid and durable. It can be attached to a wall or other vertical surface with 3M tape. The cable clip, one for each wall mount, is a nice touch. The clip is simple: a rubber hemisphere, about an inch in diameter, with a hole in the middle. When the plug is pushed through the gap, the cable is held in place until the headphones are next used. This add-on feature is especially thoughtful since it helps to minimize twisting and other forms of stress on the cable. There is a The package contains instructions, two headphone hangers, two cable clips, two-sided adhesive strips, and two other items.

3. Laptop Headphone Adhesive Network Brainwavz

Laptop Headphone Adhesive Network Brainwavz

There is a quality guarantee. If there is a quality problem, please contact them. If you have a quality problem, you can get a refund or replacement. Any device that has a max width of 3 inches and a max weight of 6 lbs can be fitted with an adjusted wall mount. There are no constraints on the device's length or height. It was quite stable for a while. Anything is suitable for almost any device that is less than 3 inches thick. This includes everything from cable boxes, Modems, Wifi Routers, Nintendo Switch, laptop holder, Smart TV Boxes, Streaming Devices, files, folders and more! A built-in headphone hanger is included in the integrated headphones. It is a convenient storage hook for hanging cables and keeping wires under control. There is a scissor mount option. Use the included screw mount hardware for a stronger and safer mounting option. You're good to go if you wait a minimum of 6 hours and push firmly into place. The strongest version of 3M VHB tape is what they use. The max weight for lighter items is 2lb / 900 grams. Do not place on painted walls or painted walls that are painted.

Brand: Brainwavz

4. Acrylic Headphone Adhesive Headset Headphones

Acrylic Headphone Adhesive Headset Headphones

If you need more firmness, you can mount the headset hanger with screws or strong 3M VHB two-sided tape. Loadable 3.3lb with tape and 33lb with screws. It's suitable for any flat surface such as PC, desk legs, cabinets, shelves, wall and glass. It can be used anywhere you like. A nice combination and sufficient quantity can satisfy your different demands, and you can share them with your friends. The headphone hook is practical and light, it is a good way to tidy up your desk, it will save space, and you can use it when you're not using it. The headset holders are made of quality acrylic, which is durable and firm, not easy to break, and the black foam pad design protects your headband headphones from wear when suspended. You can give these hooks to your friends as a present, because they are universal, and they are suitable for various kinds of headphones. They are easy to install with matched quality tapes, and you can stick them to anywhere you want.

Brand: Weewooday

👤I can't peel the plastic 3M label, so they may have changed what's used to adhere to the wall. I can't peel the covering on my long finger nails because I have a long nail. I've given up trying to get that off. I will try to use a command strip. The whole thing is brought up when I try to remove the protective label. See the picture. I was able to get that corner to peel off when I took the picture. It's very difficult to remove the protective label. It's very sticky and has 5 stars.

👤These are exactly what you think they are and how they appear in photos. They're very simple pieces of bent plastic with a thin layer of foam in the part that contacts the headphones, but they do exactly what they're supposed to do and so far, they've held my headphones without issue. They're an inexpensive choice that aren't the most aesthetically pleasing, but they do exactly what they claim and look like they do in photos.

👤These aren't strong. The first broke. All four were broken within a week. I ordered metal to be replaced. The headsets were only held by the children but they got some rough treatment. If you use alternate glue, it may work in another home.

👤I was excited when I bought this because my headsets will no longer be laying around. The glue didn't last long. I had to stick it back onto the wall after it fell again. I had to buy the ones that came with it instead of the ones that came with target. Since then, it has not fallen. I had to buy new tape for it because I think it's not worth the money.

👤It broke after catching on something and the hook came off. It took the paint off the wall.

👤I hung these with the headphones on. They are still tight and up. Prepare for missing drywall if you want to remove them.

👤It's pretty basic but useful. Does it keep my headphones off my desk? If you own wired headphones like I do, I would recommend getting cable clips that are waterproof to avoid having to loop the headphones around.

👤It's good to hold up well so far, just make sure to follow the instructions on how to clean the surface and give the glue time to stick.

👤I didn't know how to put my first 1 on. There is a I stuck it to the wall and then realized it was a tag. There is a I have a few headsets. I have a bag for my work at the side of the desk with a laptop and other bits. I bought them and they were very tough.

👤Works great for headphones and PS5 controllers. It might be a tad expensive.

👤Basic hooks are flimsy at the bend but I hope they survive. I will update if they don't.

👤These were used for the training room at work. They are easy to fix and good value for money.

5. Brainwavz Cradle Large Audio Technica Accessories

Brainwavz Cradle Large Audio Technica Accessories

The controller wall mount includes wall anchors, double-sided tape, and hard plastic for long operation life. The design makes it easy to reach your headphones. It was designed by the headphone manufacturers to have minimal long term indentation on your head band. The Brainwavz Cradle has a curved bed in order to better hold your headphones without leaving marks on your head band. The same 3M VHB tape, the same glue, and long term safety are what makes it secure. If you have to move the stand after placing it please use a hair dryer to warm up the pad and then remove it from the wall. The max weight is 1.5 kilogram. It's comparable and it has a warranty. Most headphones and gaming headsets are compatible with this. To make sure their stand is compatible with your headphones, please check the dimensions of the headset bed and the width of your headband.

Brand: Brainwavz

👤I am only leaving this review because the complete description of the product does not state it is a 3D printed piece. The picture of a smooth finish piece made me think it was a mold injected plastic piece. I received a 3D printed item. I will keep it, but not what I wanted. I have a 3D printer and can tell it is from a FDM printer. For people who are interested. Black PLA is printed at 0.2 layer height. Wall count 6 is pretty impressive. Without breaking it, I can't tell. The printer could use some tl smoothers. There is a Again, I am only leaving a one star review because I believe I was misled about the product. I would have printed my own.

👤I was assuming it would be a sort of gloss finish based on the photo on the product page. I received a pack of raw-finish-looking 3D printed headphones. It's not the most appealing look for the product, but they do their jobs well, and anything else would be better. It's easy to miss that this is not a smooth finish, even though the photos depict it. I can't recommend it since it's not all that visually appealing. I think that's important for something that used to hang and display headphones.

👤These were bought to hang two headsets on the side of a media cabinet, made of the same laminated particle board that most user-assembled furniture is made of. I stuck these into place after cleaning the surface. I left the hangers unused for a couple of days before hanging them. The backing has held up well. There is a The best thing about these cradles is that they are arched and don't cut into the padding of headphones. There is a I understand why some would not like it, as some of the reviews state, these do have a rough-cut, textured look to them. I like the look of them. I haven't looked at them since I installed them. They blend into the room as black headphones.

👤I have too many headsets. I needed a way to keep them all out of the way so I could grab them. I bought two 2-packs. There is a The plastic is strong. It is easy to put a headset on the hook and take it off again. I've seen 3M red tape used on dash cams, and it's really strong. This glue is forever. If you don't want it to ruin the finish of the furniture you stick it to, you can wait 10 minutes to remove it. It is easy to remove the leftover glue with the help of WD-40. You just have to deal with the effects of WD-40.

👤I love these. I don't know. I have 5 pairs of headphones that I have accumulated from gaming, but I have no place to put them. I found some really cool mounts for them. They're wide to accommodate thicker headbands, and the mount is larger, so it doesn't cause the foam pad to get damaged over time. They are the perfect size. My audio technicas can hold the headset up with the cable around the hook, even though most of my devices are wireless. I will definitely be investing in more of these when I move to a new place.

6. Yestbuy Headphone Drilling Required Universal

Yestbuy Headphone Drilling Required Universal

The Universal Game Controller HOLDER is suitable for your most old and retro controllers. It works with many game consoles and PC game pads. You can expand or grip the branches to fit your controller. The Headset Stand is made of Class A casting acrylic panel and has more solidDurability. The earphone holder is octagonal. It's easy to access your headphones. The long curved support is made of a soft, non-abrasive Silicone cover with a sturdy internal frame. If you're a musician or a gaming enthusiast, this is the perfect accessory. It can be reached when you need it. A multi-purpose hanger. It's great for hanging cables, earphones and other gadgets. The max total weight is 1 kilogram. Tools are used to install. 3M double-sided tape is strong and reliable. Before attaching, clean surface well with provided wipes. Allow 3M to set for 24 hours. It is not suitable for use on wet, greasy or dusty surfaces.

Brand: Yestbuy

👤The concept and style of brackets were great, but even after waiting for the manufacturer's recommended time to place headphones on the brackets, they all started falling off. It is in an office setting.

👤The recent covid-19 conditions caused us to home school. The headset hooks helped greatly while 100 was trying to create an educational environment.

👤These are the best headphones to use. I don't use the included strips because I prefer using 3M Command Strips.

👤It's perfect for holding my gaming headsets and cords. So far, holding up fine. More of these will be planned for later on.

7. Foldable Headphone Universal Headphones 6A 1202BK

Foldable Headphone Universal Headphones 6A 1202BK

The foldable design is space-saving. The arm can be folded up if it isn't being used. The raised final arm has a rubber strip on it. The arm is large enough to fit all kinds of over- ear headphones. The kit is convenient to store and reach your headset. Comes with a cable clip. The cables are dragging on the ground. The cord holder can be applied to any type of setup. Give your desk back and use it to create a killer gaming environment. Soft curved rubber landing pad holds your headset well and won't cause any damage to its foam headband. The raised part is supposed to prevent headphones from falling. Made from solid aluminum is durable and sturdy. 60-day money back and a 12-month warranty are included in the Quality Assurance and After-Sales Service. If you have a question, please contact them. If you need more firmness, you can mount the headset hanger with screws or strong 3M VHB two-sided tape. Loadable 3.3lb with tape and 33lb with screws. It's suitable for any flat surface such as PC, desk legs, cabinets, shelves, wall and glass. It can be used anywhere you like.

Brand: 6amlifestyle

👤You think you don't need this product until you buy it. I don't like having to put my headphones in a container every time I use them, and I don't like having to take them out. I didn't like leaving my headphones out to collect dust and suck up space inefficiently. I decided to give this product a try. I love it. It's simple, elegant and very versatile. I was worried that it wouldn't fit on the front side of my desk. It was easy to fit to the legs of my table because you can adjust the hook's direction. It will still collect some dust, but it will be less than under something. This product is great for anyone looking for storage items.

👤I didn't want a stand on top of the desk as there was not enough room for one without my desktop getting crowded. I was looking for a hangar that I could hang on the inside of the frame, so that it wouldn't stick out to pedestrians. There is a This hangar is perfect. It seems to be well made and sturdy, has pads so as not to damage the desk frame, and it has more than enough adjustability to accommodate thicker desk frames/tops. I like the clips to hold my headphones, it's nice to be able to roll it up and stick it in without having to worry about the wire getting loose. There is a My cable-managed PC station has a new addition.

👤I bought a new headset for my computer. I picked it up. The rubber coating on the ledge helps keep the headband from sliding around. It has a lip at the end that helps to keep your headset from sliding off of the end. I had a similar stand for my headset, but it didn't have either of these features. I decided to replace the stand for my console headset after I thoroughly enjoyed the new one. I like that the stand can be folded up when not in use. I would highly recommend this stand if you were thinking about getting it.

👤I attached this to the leg of the table that I use for my computer desk to free up space for my headphones. I like the fact that the mount can be turned so that it can be mounted vertically or horizontally. The screws/screw holes/allen wrench are not up to snuff. The allen wrench takes a little work to get into the screw heads, and the screw holes seem to be off-level. The screws are not in a straight line regardless of orientation. It is very odd. I am able to change the orientation of the mount without a problem, and once mounted it is not coming off the table's leg until I remove it. I am very satisfied that it mounts firmly. It's probably too much for the headphones I am using, but that's not my main concern. I'm happy that I can keep my headphones plugged into my computer and have them tucked away, so I can use them whenever I want.

8. Headphone Link Dream Organizer Headphones

Headphone Link Dream Organizer Headphones

If you have questions or are unhappy with your shopping experience, please contact them. Space saving and foldable. You can fold it up when not in use, and keep it neat and tidy. The headset hook is designed with a cable organizers to make it easier to organize your gaming/wire headphone cable. It can be used for hanging headphones. The aluminum material is strong and can be used for a long time. The raised edge of the wall mount can prevent headphones from falling off. It comes with strong 3M glue and screws, no glue needed, but holds securely, and it's not easy to fall off. You can use strong 3M VHB tape or reinforce with screws. More Than A Headphone Hook can be mounted on any smooth surface like a bookshelf, desk, table leg, cabinet, computer host, door, wall, etc. It is also available for hanging bags, file folders, keys, umbrellas, and other small items.

Brand: Link Dream

👤It says it's aluminum, but it feels very cold. The finish is black and I think it's type 3 anodized aluminum, the kind you'd find on a high end flashlight. There is no mark when you scratch the surface with ordinary objects. I had to use a sharp screw to make a mark. It's interesting for something stationary to have scratch resistance. There is a The hinge is strong. I tried to bend my spare backwards, but it wouldn't bend or warp. It could hold a jug of milk. The mounting point is likely to fail before the hinge does. I used screws directly into the sheetrock of the mount. My only suggestion to the vendor is to give us longer screws. The cable clip buttons help direct and organize the cable. The value was very high.

👤The product works well and is well designed. The reason for the low score was due to the fact that the brackets had only three screws for mounting, where four are required.

👤These little ladies worked well. I have a full studio setup in my home office, which means a lot of cords and headphones. These hold onto smooth/semi-rough surfaces perfectly. I will be buying more packs to manage cable around the house. Great stuff.

👤The package had missing hardware. The wall anchors and screws were not included in the photo. So disappointing. Had to return them.

👤I used this to hold up a pair of headphones. Waited a while before putting the weight on the brackets. After a few weeks, the glue failed. Very disappointing.

👤The material is strong. The cable organizers are working perfectly. Easy installation of strong 3m glue.

👤There are two great options for this headphones.

👤The build was good and past my expectations.

👤All metal is very well built, no wobble when folding it up. I used the sticky pads and screws to mount my desk and they seem to be stuck. You get two of them in a pack.

9. Headphone APPHOME Foldable Aluminum Universal

Headphone APPHOME Foldable Aluminum Universal

It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc. Small and foldable design saves space. It can be used to free your desktop from chaos. Safe and Stable: The headphone stand has strong glue that will allow it to last a long time. The materials are high-quality. The rubber pads on the headband protect it from wear. All kinds of headphones, such as wired headphones, wireless headphones, gaming headphones, TV headphones, and so on, are suitable for the universal headset holder. It's easy to install and can be mounted anywhere. On computers, desk, and wall. Clean the surface by using wipes.

Brand: Apphome

👤I was very happy with my purchase of this headphone holder, but it has been a year since I purchased it. I noticed that my headphones got in my hair when I noticed the odd goop on the bridge. The pull out bracket that my headphones rested on was the culprit. I was able to use alcohol wipes to remove all of the liquified glue and I was also able to repair the small pad that locks the brackets in the closed position with some automotive grade 3M double sided tape. Hopefully it will hold up better than what was used to assemble it. Is this the end of the world? I am going to keep an eye on it because it was a quick repair.

👤I have a charging station in my laundry room. The hug makes it look less cluttered and it gets a lot of stuff off the counter. I charge a lot of stuff on this station. The double sticky tape is used. I made it even more solid by attaching a couple screws to the holes. Unable to keep earbuds and headphones off the countertop while charging. If you don't have anything to hang on it, this is a great option. I'm very happy with the space that was cleaned up.

👤The option to screw it into your desk is what I bought this hook for. I tried the glue before I tried to put it in. I had low expectations, but the sticker is so strong that it's like a combination of Ultimate Warrior and Hulk Hogan. I'm thinking about buying another one for my towels.

👤My father built a desk for me that is solid wood. It was built for writing, not a computer. I used the glue that came with the product because I couldn't drill a hole in it. I have a very light-weight Sony headphones, but they haven't budged over a month. The hook portion is large and padded to not damage my headphones. I might put two different pairs on there. I love that when I move this desk, I can just close the hook and it won't be a problem. There is a The metal is heavy and shiny. It's a good addition to my desk. I wish it didn't have the logo, but it is perfect.

👤Unfortunately it did not last. It fell off my wall in the middle of the night, luckily it didn't break my headphones, I was sleeping. It was loud. I might use it on a wood surface with screws to hold it up instead of giving it to someone else. Holds fast to painted plaster. I've considered buying another one just for the tape. It has been on the painted plaster walls for a long time. It holds my headphones and doesn't bang when I place them down. The inside of the "hook" is made of some kind of material. It doesn't open without you meaning it to.

👤This is what it seems to be. I thought it would be bigger but it is not. I used the two screws instead of using the glue to stick to the wall. I would have been concerned that the headset wouldn't hold it's weight. There is a This looks great on the wall. When I moved my console, I realized I lost the space I wanted for the headset stand and that's when a hanging stand became optimal. This is in front of my console. It's difficult to pull it down when it's folded up, because you don't have headsets on. I think that will loosen over time with use and shouldn't be a negative.

10. HONJIE Headphone Headset Universal Organizer

HONJIE Headphone Headset Universal Organizer

More Than A Headphone Hook can be mounted on any smooth surface like a bookshelf, desk, table leg, cabinet, computer host, door, wall, etc. It is also available for hanging bags, file folders, keys, umbrellas, and other small items. There are 2x Headphone Hanger, 4x3M Adhesive Strips, and 2x Cable Clips. It can be installed almost anywhere and can hold the weight of all models of wired and wireless headphones. The Smooth edge design of the headphone hanger keep it safe from scratching and dropping. It's designed for people who appreciate quality, minimalist style and ultimate versatility. There is a quality guarantee. If there is a quality problem, please contact them. If you have a quality problem, you can get a refund or replacement. There is a quality guarantee. If there is a quality problem, please contact them. If you have a quality problem, you can get a refund or replacement.

Brand: Honjie

👤Doesn't stick well. Keeps falling down.

11. Linkidea Controller Compatible Multifunctional Adjustable

Linkidea Controller Compatible Multifunctional Adjustable

You can arrange the hooks to create a stylish hat display. The photos in their customer reviews are inspiration. Their easy-to- install hat organizers will help you organize your room. The rack can be bent and open wide. You don't have to worry about falling because the advanced adhesive has an ultra-strong viscosity. The controller wall mount is wrapped in rubber, so please don't worry about the scratches. Strong bond. It's compatible with your controller. It's convenient to hang cowboy Ha, skateboard, water bottles, gloves, duffle bags, coiled-up cords, lightweight purse, shopping bag and headphones holder. Product dimensions are 2 x 2 and 5 x 5. The controller Wall Mount X 4 is part of the package.

Brand: Linkidea

👤I brought an Ausu headset and wanted a stand that I could place when not in use. The stand was sold for $139. I didn't want to break the bank on a Headset stand which doesn't charge the wireless headset because my products are expensive. I didn't want to have a Crossair orMSI production. I found these. There is a It fits my headset and just tapes to the wall. It comes with 4 of them. 2 for my controllers and 1 for my headset. I screwed it in for support because it was a hook piece with 3 things. There are amazing little treasures. Even more of them.

👤Love the idea. The mounting hardware is a joke. I used my own mounting brackets and screws because the plastic things that hook around the mount kinda suck. Not disappointed. My son and I both play. Both of us use controllers and headsets. I can hang everything up now and keep the tables clear.

👤It will ruin your wall when removed. When I tried to remove the hooks completely from the wall, they took off the paint and dry wall.

👤It works well for holding and adjusting controllers. It is difficult to tighten the bullet nut if you have large fingers and hands. It comes with more hardware. In case you lose the nut.

👤I got these for my controllers. I screwed these into the wall without using the glue. I was able to get the perfect holder after bending the arms. This should work for practically any controller.

👤I bought them for my desk. I knew I wouldn't be able to fix these, but that doesn't mean zip ties can't. I put them on the frames. I now have mounts for game controllers, as well as anything else I want to hang there. Recommended!

👤I was adjusting them to hold my controllers when 2 broke. The other two seem to be holding together, but the glue didn't stick well. I had to buy some double sided tape. I don't think I'd recommend or buy again.

👤They are very thick, and the glue sticks to bricks great. This is the most aesthetically pleasing option because I have a hard time keeping my controller where I need it. I like how flexible they are.


What is the best product for headphone hanger wall mount?

Headphone hanger wall mount products from Avantree. In this article about headphone hanger wall mount you can see why people choose the product. Oaprire and Brainwavz are also good brands to look for when you are finding headphone hanger wall mount.

What are the best brands for headphone hanger wall mount?

Avantree, Oaprire and Brainwavz are some of the best brands that chosen by people for headphone hanger wall mount. Find the detail in this article. Weewooday, Brainwavz and Yestbuy are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to