Best Headphone Hanger Wall

Hanger 26 Jun 2022 10+ Comments Open

1. Headphone APPHOME Foldable Aluminum Universal

Headphone APPHOME Foldable Aluminum Universal

It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc. Small and foldable design saves space. It can be used to free your desktop from chaos. Safe and Stable: The headphone stand has strong glue that will allow it to last a long time. The materials are high-quality. The rubber pads on the headband protect it from wear. All kinds of headphones, such as wired headphones, wireless headphones, gaming headphones, TV headphones, and so on, are suitable for the universal headset holder. It's easy to install and can be mounted anywhere. On computers, desk, and wall. Clean the surface by using wipes.

Brand: Apphome

👤I was very happy with my purchase of this headphone holder, but it has been a year since I purchased it. I noticed that my headphones got in my hair when I noticed the odd goop on the bridge. The pull out bracket that my headphones rested on was the culprit. I was able to use alcohol wipes to remove all of the liquified glue and I was also able to repair the small pad that locks the brackets in the closed position with some automotive grade 3M double sided tape. Hopefully it will hold up better than what was used to assemble it. Is this the end of the world? I am going to keep an eye on it because it was a quick repair.

👤I have a charging station in my laundry room. The hug makes it look less cluttered and it gets a lot of stuff off the counter. I charge a lot of stuff on this station. The double sticky tape is used. I made it even more solid by attaching a couple screws to the holes. Unable to keep earbuds and headphones off the countertop while charging. If you don't have anything to hang on it, this is a great option. I'm very happy with the space that was cleaned up.

👤The option to screw it into your desk is what I bought this hook for. I tried the glue before I tried to put it in. I had low expectations, but the sticker is so strong that it's like a combination of Ultimate Warrior and Hulk Hogan. I'm thinking about buying another one for my towels.

👤My father built a desk for me that is solid wood. It was built for writing, not a computer. I used the glue that came with the product because I couldn't drill a hole in it. I have a very light-weight Sony headphones, but they haven't budged over a month. The hook portion is large and padded to not damage my headphones. I might put two different pairs on there. I love that when I move this desk, I can just close the hook and it won't be a problem. There is a The metal is heavy and shiny. It's a good addition to my desk. I wish it didn't have the logo, but it is perfect.

👤Unfortunately it did not last. It fell off my wall in the middle of the night, luckily it didn't break my headphones, I was sleeping. It was loud. I might use it on a wood surface with screws to hold it up instead of giving it to someone else. Holds fast to painted plaster. I've considered buying another one just for the tape. It has been on the painted plaster walls for a long time. It holds my headphones and doesn't bang when I place them down. The inside of the "hook" is made of some kind of material. It doesn't open without you meaning it to.

👤This is what it seems to be. I thought it would be bigger but it is not. I used the two screws instead of using the glue to stick to the wall. I would have been concerned that the headset wouldn't hold it's weight. There is a This looks great on the wall. When I moved my console, I realized I lost the space I wanted for the headset stand and that's when a hanging stand became optimal. This is in front of my console. It's difficult to pull it down when it's folded up, because you don't have headsets on. I think that will loosen over time with use and shouldn't be a negative.

2. Yocice Under Desk Headphone Aluminum Headphones

Yocice Under Desk Headphone Aluminum Headphones

There is a 2 year satisfaction guarantee forValuable gift for Christmas, Thanksgiving day, Easter, Birthday, Valentine's day and more. Hook can hold up to 10 pounds. The heaviest headphones weigh about one pound. 3M VHB tape is used to adhere the aluminum material and soft silicone pad. One headphone hanger with 3M VHB tape. mounting on computers, desk and wall is durable.

Brand: Yocice

👤The frame doesn't bend without some force applied to it. The color of the product is great, but it doesn't scratch easily, like some other products that will scratch and ruin the look. Installation is the easiest thing in the world, stick to the spot, good to go. There is a There are pros and cons. My circumstance doesn't allow me to use the provided screws to install the hook. I bought this product because it came with a sticky pad. I have headphones that are not much heavier than the ones I use. The sticky pad didn't stick for long. It may have started peeling away from where it was placed a week before. I thought it might have been a mistake, but it wasn't. It's a very simple fix, I just bought better double sided tape and I haven't had an issue with it after that. I had to go out of my way to make it better, so I had to dock it some stars. That may be useful information for some people. The tape was not very good, but I am happy with the rest of the product. There is a This style of hook is perfect and many prefer it over the above desk ones. If you are able to do that even better, the color doesn't chip away, and the material comes with screws if you are able to do that, I would recommend this product over others. If you plan on using it that way, you should install a better quality double sided tape.

👤I didn't expect the glue to bond to my desk to be welded on. I am either weak or it has its own pull that was reinforced using superglue. It's important to plan where it's going to stay.

👤I put this under my desk with the 3M double sided pads. It is small but works for my G930's. The material is very strong. There is a The best part is that they included small clips. I was able to run the charging cable cleanly underneath my desk. There is a Overall happy. It was a bad deal for the quality.

👤I stuck it too close to where my legs were, and it would occasionally hit me. It sticks very well if it does what it's supposed to. The HyperX Cloud II headset is in place.

👤I can't stand the amount of stuff on my desk. I did not want a headphone rack because it was at risk of being knocked over. The metal is heavy for its purpose and won't bend. The mounting tape did not work. I used the screws that came with it. It was kind of annoyed. I didn't want to put holes in my desk. Overall happy with it.

👤The purpose of it is to serve as a headphone hanger. It is made of aluminum and feels sturdy. The only reason I'm giving it two stars is because it's not as advertised. There are 4 holes in the hook. Two (2) are located in the center of the hook and two (2) are located towards the top of the hook, which has slots to allow sliding the hook onto screws. I don't care if it's not what I ordered, since it does its job and I don't see it under my desk.

3. Latom Foldable Hanging Aluminum Headphones

Latom Foldable Hanging Aluminum Headphones

One holder for all is designed to hold your game controllers and headphones in one place. The heavy duty folding hooks are made from aluminum. The coat hook is 78 x 26 x 71mm/ 3.07 x 1 x 2.79 inches and the screws are 25mm long and 8mm in screw head diameter. You can use these folding wall hooks to hang dresses, clothes, headsets, and hats in different places, such as bedrooms, bathrooms and closets. The hanging hook has a smooth edge that will not damage your clothes or items you hang on. The folding hooks are very easy to install. The hooks are reinforced with 2 screws. The folding hooks are very easy to install. The hooks are reinforced with 2 screws.

Brand: Latomex

👤If you are looking for an item to see your nerdiness, then these are the ones for you. Your headphones are mounted on your wall as if they are a trophy buck. If you want to impress the ladies, you should show off those beautiful headsets. The folding mechanism makes them disappear like your father when you were a child.

👤I had the idea to hang my headphones and a bunch of stick on hooks, but they came up a few times. This one gives value. There is a 5 piece package out there, but this one of 4 costs less. It is made of metal. It falls down. It's about 3 inches or something like that. Comes with screws. I have 6 headphones on the wall. It will work for any hook of that size. I can flip the doors up when they're not in use. You don't need to search for hours to spend 10 bucks.

👤The Greekia version of these are twice the price, and they are fantastic. I was trying to save money, and so I ordered these, and two of them fell apart and opened up. There is no way to put the pins back together after the plastic came out from under the metal lip. The two that were usable were from the four pack.

👤I didn't want to spend more than a few dollars for a mount for my controller. The official ones go over 15 dollars but are not worth it. I found these for a lot less than I expected. If I had bought a headset mount and controller, it would have cost me 30 dollars and I would have had to pay 6 dollars for it. It worked out great.

👤Nice idea, nice design, poorly executed with cheap materials. I received more than I wanted because I marked the box twice. I have replaced one of them three times now. They hang partially open after install, as they no longer flip back to their original position.

👤I bought these brackets to hold my gym gear. They're easy to fold when not in use. The brackets can hold a lot of weight. My opinion is over 10 lbs. They would be great for hats and jackets.

👤I needed a couple of hooks for my headphones and for the price, I got this kit of 4. There is a This is a bargain and it is sturdy. One of them holds their guitar by a strap for weeks without a problem if you use the correct screws. The elbow part is strong and will hold pounds and pounds of load, but the folding design may be deceiving, as it is more of a mechanical design.

👤The metal is easy to open and close, and it stays closed when closed. It's a good size to fit big things.

4. Headphone Headphones Adjustable Universal EURPMASK

Headphone Headphones Adjustable Universal EURPMASK

Customer service is great. Give it a try. You can return it within a month if you don't like it. They will send you a new one if it is faulty within a year. Universal under design allows for a near universal fit on most desks by attaching a thin, narrow, and thick piece of metal to them. It is easy to remove the Spring Clamp. The audible headphone arm swings underneath your desk for discreet and non-intrusive storage and swings back out for easy access. BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Soft rubber pads are located on both ends to protect your desk or table from damage. The under desk mount is convenient for storing. Easy installation of a springed C Clamp.

Brand: Eurpmask Choose The Color Of Europe

👤We needed a better solution to keep our headphones from breaking and this was our answer, it's very sturdy and feels very well made, it's even better if you have an xbox one controller, it's even more perfect. My purse is probably around 10 lbs. I'll probably order more for myself and gifts in the future. Highly recommended.

👤The hook portion can bend if you put a lot of weight on it and it is very cheap. There is a The head doesn't lock up. The clip is not tight enough to prevent desk steps that are less than a quarter of an inch from moving. You can get a Brainwavz Hengja Hanger for the same price that has better construction quality. I would've gotten a second one, but I got this instead when the page from my old order suddenly said out of stock and started directly to a screen protectors. I wouldn't buy it again. Cheap, poor construction, plastic bends, top sticks up a lot. A bad product.

👤It's easy to put my headphones out of the way. I didn't want one where you have to use glue or screws. You don't need a heavy duty one if you have light headphones. The mount has a sufficient amount of space. The desk is protected by the padded clamps. The mount has a hook so you don't lose your headphones. You can choose which direction you want to hang your headphones. The cord clip is nice, but it's stiff, so I just wrap it around the hook and grab my headphones when I need them.

👤This thing is great. I was embarrassed that I didn't think of getting this a long time ago, but I did not know it existed. Maybe it didn't. I am a recording artist and I use expensive headphones. They were not taken very well care of in the past, as they would flop around on various surfaces. The device is easy to set up and I like that the hook can be changed to hang things or not. I think it's a good deal so that I can get another one for my other cans. I recommend this to anyone who wants to protect their investment.

👤It was easy to put in place. I got this because I was sick of my headphones laying in random places. The hook is neatly underneath. The picture doesn't show it, but there is a small loop for a cord to go through so I leave my charging chord handing from there so all my cords are close together and easy to manage. You can put the headphones on the hook and swing them out of the way under your desk. I put one on the side table for my headphones.

👤I didn't expect to write a review on this. I thought I knew what I was getting. This is a cheap, easy to scratch plastic. The cable clip would be better not there. The only. The mechanism for twisting the hook into different positions is a nice thing about this. You only need to rotation from 90 degrees and 180 degrees. The hook is pretty loose and you can position it anywhere from 0 to 180. I would have given it a pass, but the junk quality means it should be a lot cheaper than other METAL items. It would be a good deal at five bucks, since I got it for twelve ninety nine. If you don't know better, maybe eight. No way in over ten. I'll probably keep it because it's not worth it with the Pandemic. It will have to do.

5. Enbiawit Headphone Headphones Headset Mount Installation

Enbiawit Headphone Headphones Headset Mount Installation

Universal under desk design allows for a near universal fit on most desks. There is a new word for it. The Spring Clamp is easy to remove. Not only for storing all kinds of headphones, but also for headsets, glasses, and bags. The Wall Mount Hanger is made of a soft, non-abrasive plastic with a sturdy internal frame and will not scratch your headphones. It is easy to install with included screws. The holder can be mounted on any surface you want. Small design saves more space. The holder is made of a material that is light. The headphone stand has screws that hold it in place. It's suitable for all kinds of headphones and earphones, such as wired headphones, wireless headphones, PC gaming headphones, TV headphones, wired earbuds, wireless earbuds, and wireless earphones. It can be mounted on any flat surface you want, such as desk legs, cabinets, shelves, wall and glass. It can be mounted on any panel. Such as on a desk. Clean the surface by using wipes.

Brand: Enbiawit

👤I like this product. The hook is mounted to the wall. I have it to the left of the white wall switch. There is a The hook is large enough for any headphones. Simple white hook design looks nice mounted to the wall. There are holes for the anchor in case you need more. I was worried that the hook would be too small for Airpod Max, which is a sort of wide mesh top. It's a perfect fit, but can probably fit any other headphones. I don't use the feature, but I like that it has additional holes for holding airpods or ear buds. All in all, what I wanted.

👤I use a HyperX Cloud Stinger for work. I have an ikea desk. I stuck it to the side of the Alex drawers. It feels very sturdy and holds up well. I'm not going to pull this off unless I pull as hard as I can. There is a The HyperX is wireless, so I don't have cables to mess with, but it looks like you could wrap the cables around the front lip of the hanger. There are slots where you could keep earbuds. All of them were very happy with my purchase.

👤I got this for my headphones. I wanted to keep them away from my son. I like the idea that you can use this to store a variety of headphones, including gaming headphones, airpods, tv headphones, and your regular music headphones. I think my only complaint is that the 3M glue that I used on my wall did not hold up as well as I would have liked, the part that was sticky stayed on the plastic and the rest of the glue was on the wall. I tried applying the command strip to the sticky part but it didn't work. I was able to remove the sticky part from the plastic and get the glue off the wayy with no damage or problems, and I placed the command strip on the plastic to the wall, and it has been up there with no problem. If you're going to purchase this, you should take into account something, like command strips. I need it and it works just as I need it. My headphones are out of the way now.

👤My desk is not cluttered because my headphones are held for work. They are a good purchase.

👤It's very easy to install and fit, I screwed it into a stud and it's not going anywhere.

6. Foldable Headphones Aluminum Wallmount Protective

Foldable Headphones Aluminum Wallmount Protective

The package includes 5 wall hooks, 10 screws, 10 anchors, 1 glue, 5 sponge pads, and 5 auxiliary stickers. The hook is 3 x 2.76 x 0.94 inches. The machined aluminum is capable of holding small and large headphones without bending or breaking. The front end of the ear hanger is flexible. Fix on with screws or hold the security side of your desk with strong 3M VHB two-sided tape. The screw should be used more firmly. All headphones can be compatible with Universal compatibility. It could be used to hold other things such as coiled-up cords, lightweight purses, or shopping bags. Storage that is space-saving. It's ideal for home, work, school, or cyber cafes to keep your headphones easy to reach. There is a foldable stand x 5 in the package.

Brand: Geekria

👤My son has an audible sensitivity issue and has a lot of headphones to help him. Managing all of these headphones was starting to be a challenge. While searching for a solution I came across this product and I am impressed with the quality of the products for the price. Many products that I've used like this would come undone quickly, so I was hesitant about using the pads. The pads are great. When you mount them, you can feel how solid they are. The pads are clear so you don't see a white pad behind them. A small touch but nice. I'm considering ordering more of these for other uses.

👤I wanted a clean mount for my headphones. It's hard to go wrong with 5 mounts, but I think they are a bit over the top. If you need to have them retractable, I would recommend removing the pivot screw and adding a bit of blue locktite to keep the screw snug, one of mine was loose and I think it would. If you're using them in an environment that would shake them, you might want to consider doing this. The product is built very well and I don't take any points off of it.

👤My desk is built from 80/20 aluminum. They are strong enough to keep out of the way when not in use, but slim enough to fit in a small bag. I can setup a slender shelf using these, they are open and have a depression which keeps items in their place even when bumped. All edges are smooth and the width is one inch. They are great for a variety of jobs.

👤I was looking for something to hold my headset in place. Many of the items I found on Amazon were made of plastic and didn't have a good look. The item is light and folds in when not in use. It comes with screws but also a very strong double sided tape. If your wall is made of cinder blocks or not allowed to make holes, this is a great looking headset hook.

👤I use these to hang up some items on a cabinet side. I hang headphones and other objects which I use on a regular basis, but which do not need to occupy desk-space. It helps to keep things organized. I used the supplied 3M double-sided tape to attach them. The manufacturer's recommendations regarding load-weight, surface etc. should be paid attention to. Will buy them again and recommend them to others.

👤The screws are junk. I tightened the pilot hole on the side panel of my desk. They're black, but don't go crazy on them.

👤It did not stick to my walls, but it did work on a flat surface. Before sticking, make sure the surface is clean. I really like the product. I can not blame the product for not sticking to the textured walls, as this has happened with other products as well. I like them and am happy. They fold up when you don't need them.

7. Headphone Universal Sennheiser Audio Technica Controller

Headphone Universal Sennheiser Audio Technica Controller

The package weight was 5.15 lbs. Easy access to your headphones. The long curved support is made of a soft, non-abrasive Silicone cover with a sturdy internal frame. A multi-purpose hanger. It's great for hanging cables, earphones and other gadgets. The max total weight is 1 kilogram. Clean and organized space. Installation is virtually anywhere - on walls, cabinets, glass surfaces, monitors, desktop towers, etc. You should organize and tidy up your workspace. Convenient installation. It uses double-sided tape for strong, reliable adhesion. Clean surface well using provided wipes. Allow the holder to be used for 24 hours. It is not suitable for use on wet, greasy or dusty surfaces.

Brand: Avantree

👤It worked well for a while. One day, I walked into my room and heard a noise. I was trying to figure out what fell, but realized it was my headset. I followed all the directions after having it for less than 3 months. I pressed the alcohol wipes against the sruface to make the surface clean. After hanging it up, I made sure to not use it for 24 hours. It still fell despite all that. They need a better stand. I'll probably buy something to keep it. It was unfortunate it didn't hold up. There is a Customer service contacted me saying my previous 2 star review was detrimental to their reviews. They gave a free replacement. If they think the 2nd will hold up, I'll change the review. I'm not going to change my review if the second product does the same thing as the first. They asked me to send the email back to them, after they lost the previous messages. I did. They responded with nothing relevant to what happened before. I'll take it down to just 1 star now that I know their customer support isn't helpful. This isn't worth the headaches if you buy it from someone else. There are two edits, the first one is called Edit 2. I bought my own double-sided tape and it seems to be holding up well, so it's 3 stars. Customer support is very determined to make sure I like their product. I didn't use the new one because I was expecting the same thing to happen. If you rely on the glue, then you should buy any other glue.

👤I bought this item on December 13th. The stand has begun to separate from the glue. I was expecting this accessory to last as long as I thought it would. I had thought I would get at least 6 months out of it, considering the brand of glue they chose. I always took care to place things on it gently. The back of the rubber/plastic hanger and the desk it is attached to have begun to separate from the glue that is attached to them. The stand was rated 5 out of 5 for its function and 2 out of 5 for its longevity. Customer service was 10/10.

👤I used to get different types of L-shaped things. I changed my mind after reading reviews about people getting dents in their headsets. There is a This thing is awesome. Stick to a wall and it will hold up a heavy, wireless, headset. I attached one to a desk as well. I picked up a set of two for a very competitive price and was happy to return for more, and they were even cheaper. I can't say for certain, but I can say that you get your money's worth. There is a If you feel like you have a heavy headset and need more support, you can get a double-sided mounting tape. There's enough here to support 20 lbs of weight, and 3M makes the absolute best. The back is large enough to double the amount of tape holding up whatever you're trying to hang on the rounded mount. It's cheap for the amount you get.

8. Linkidea Gamepad Controller Headphone Headset

Linkidea Gamepad Controller Headphone Headset

The stand is made of high-quality aluminum. The PS5 PS4 Xbox one controller, desktop computer game handles, and most game controllers are compatible with the handle and headset hook brackets. The transparent patch and screw method is suitable for installation in any place-table, shelf, cabinet, glass surface, and so on. Product dimensions are 3.14 x 1.57 inches. The package has headphones stand X 1.

Brand: Linkidea

👤The controller does not provide proper support.

👤It's easy to install. It's high quality. The mount is made of solid metal with a black coating, but the brackets are plastic. It's easy to install if you have a 9 year old. The mounting system is strong. It works perfectly with the Xbox X/S controller.

👤The controller is too small to hold this small accessory. We didn't install it before trying to balance it. The pictures of the product were not real. Returning.

9. Lamicall Headphone Stand Headset Holder

Lamicall Headphone Stand Headset Holder

It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking. The rotation is done at a certain degree. The stick headphone hanger can be applied to different positions. Can paste under a table, under a desktop, under a cabinet, and on smooth surfaces. Headphone cable organizers. The headphone hook with the headset cable organizers can be used to make your desktop more tidy. Quick install. The holder has strong double-sided tape. Please hang your headphones after 24 hours to make sure the suface is dry and oilless and to make sure the hanger is firmly stuck. The hook of the headphone holder stand is made of rubber. The leather of the headset head beam needs to be kept free of the hook. It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc.

Brand: Lamicall

👤I gave one as a gift. The mount comes with an extra sticky pad so you can move it to another location if you want. The material is sturdy and doesn't feel cheap. We've bumped into it a few times but it hasn't broken or anything, but the mount is most likely going to fail given the weight. The mount can be used in many different ways, and it is very versatile. I've seen other options that aren't gaming headphone stands that take desk space, and plan on buying one for myself.

👤The item cannot be placed on the underside of the desk. For a few days, the glue stays. Twice, I used up the two patches that came with the product. If the base is mounted on the top side of the desk, this item will work. This takes up space on the desk surface that I didn't want. The product did not work as pictured, even after following the mounting instructions exactly. The device will not hold the Apple AirPods Max. Don't buy.

👤I have a white desk and a light grey chair, and this is the perfect accessory for it. The design is simple and quality. If you clean the surface before applying the glue, it will cure in 24 hours and be very strong.

👤The rotation feels great, it feels like clicking every 90 degrees. It was easy to install the included glue under my desk. It's easy to set the headset on when I work because I rotate the clip out. When I'm not working, I put it back under the desk so no one accidentally bumps into it. I used to have to reach under the desk to get to it. The double-sided cord clip is great to have because it allows you to clip in a headphone cord as well. If you need a power cord. The clip is a little flimsy. When I plug the headset into the light pull, I have to pop the cord back into the cord holder, which is an extra step. I would like the cord to stay in the clip.

👤The glue is terrible. Will not hold instuction to let the glue set for 24 hours, it did not work after 2 days. Might as well drill through the base with screws. You're better off with the screw style. There was an update on 2/7/2022. I did what I suggested a couple of weeks ago and it worked. The company made contact with me after modification and offered to send me a replacement. I said no because I accomplished the above and didn't need another one. They still wanted to give me a refund and send a new design with a scew shaft. The design worked better and the original cost of the order was returned. I increased my rating from 1 to 3 stars because of their customer support. You don't hear about it a lot these days.

👤I bought two of them because I liked this. They were easy to install. I had to store my headphones on them and I had to make sure it was good. One of the holders fell about three months later. I stuck it back up after I wiped the dirt off the spot it was going on and it seems to be holding up. I will switch out the glue if it falls again. The different ways in which it is held makes it easy to remove it from the way.

10. Headphone Headset Adjustable Rotating Earphone

Headphone Headset Adjustable Rotating Earphone

The size is 7.5 and the material is plastic. The innovative design of the hs906 allows it to be used as a stand or a headphone hanger. It's a good idea to put your headphones under your desk. Or use it as a stand to keep your headphones out of sight. The height is adjusted for different usage scenarios. When using as a stand, shorten for hanging under the desk. A raised ledge around the mount prevents headphones from being knocked off. You can keep your headphones out of the way with the rotating support mount. It's easy to access them from the front. It's simple to install the design on any table edge or horizontal shelf. The table tops can be up to 1.97” thick. Silicone pads protect your furniture from damage. Wide compatibility works with most over ear headphones. It can be used to store cables, wires, bags, and other items.

Brand: Neetto

👤I was hoping that my foldable table would be able to connect easily and not have any problems, I am using it as my pc desk. I was able to get it on to the desk but my headset was on the floor and the stand looked like it was bent backwards. The company reached out to me and gave me a brand new headset stand, which I will use. I received a Universal Wooden aluminum headphone stand holder that does not attach to my desk, and I would recommend them to anyone.

👤A nice stand for headphones. It is mounted to the desktop with a spring clip. My desktop is about 1.5 inches thick, and it will stretch over the max. Thinner desktops would work, but thicker wouldn't. There is a wheel that adjusts the height. Undermount or overmount this holder. I settled on the overmount after testing both.

👤Returned immediately after opening. It was thought to be a mix of metal and plastic, but the method to adhere to a desk is weak. There is a If you're looking for something that's simple. This is for you. I'm not saying it's terrible for you, but it's terrible for me.

👤It works as advertised, and has a slightly wider clamp than some other desk accessories. It was nice to have a little wiggle room when attaching, it was a little thicker than my standard desk, it was great for my desk. I don't know if the weight of the headset is better than other headsets. It's one of the heavier headsets I've had. It's held up well.

👤I bought this for my boyfriend because he likes to keep his desk organized. Instead of using it for his headphones, he uses it to store his virtual reality headset. I made sure it fit his desk, and it seems sturdy. It won't fall off of the desk because of the design. If it fits your desk, I would recommend it.

👤If you only need a headphone stand for the headphones to stay out of the way, you're done. This stand is going to stay, it has a lot of placement options, and will keep things where you want them. It is all function and no aesthetic so it won't be for everyone.

👤I have been working from home and have found myself tossing my headphones in order to call the door. I purchased the 2 in 1 Neetto Headphone Stand and it fit perfectly. I can now hang my headphones without worry.

👤It is stable, can fit two headsets, and serves its purpose well. What more can I ask for? I wanted a holder that was easy to set up and didn't take up a lot of table space. The fit was perfect. It's still early, but it's holding up well.

👤My son's headphones were always falling on the floor, so I bought it for his desk. I was nervous. He would crush it with his chair. He assembled it himself and said it was great. He is a teenager, so he must be impressed by it.

11. TotalMount Gaming Headset Holder Permanent

TotalMount Gaming Headset Holder Permanent

Universal mounting: The portable vehicle headrest mount player allows you to easily install the posts into your car. Everything you need for a screen cover, mount, and remote control is included. Damage-free mounting. Mount your gaming headset almost anywhere. The premium-grade headset holder uses a specialremovable glue to avoid damaging the wall. This product is ideal for people who don't want to damage their headset or wall. This stand has an extra large cradle to make sure it is compatible with larger gaming headsets. This stand has a soft-Silicone holder to protect your headset band from scratches. It's compatible with all gaming headsets, over-the- ear headphones, and on- ear headphones. TOTAL MOUNT is the leader in electronics mounting. Over 70 patents, 50,000 five-star reviews, and a long history of quality make TOTAL MOUNT a leader in its field. TOTAL MOUNT is the leader in electronics mounting. Over 70 patents, 50,000 five-star reviews, and a long history of quality make TOTAL MOUNT a leader in its field.

Brand: Totalmount

👤The product works as intended. I have a headset on my computer. It seems very sturdy and has no fear of falling.

👤I have a headset that most stands don't work, but this one does very well with it.

Summary

What is the best product for headphone hanger wall?

Headphone hanger wall products from Apphome. In this article about headphone hanger wall you can see why people choose the product. Yocice and Latomex are also good brands to look for when you are finding headphone hanger wall.

What are the best brands for headphone hanger wall?

Apphome, Yocice and Latomex are some of the best brands that chosen by people for headphone hanger wall. Find the detail in this article. Eurpmask Choose The Color Of Europe, Enbiawit and Geekria are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com