Best Headphone Headband Pad

Headband 26 Jun 2022 10+ Comments Open

1. VEVER Replacement Headband Beyerdynamic Headphones

VEVER Replacement Headband Beyerdynamic Headphones

The package has a headband cover. It is high elasticity, durable and soft. Replacement headband for Grado and more. Give your headphones a new lease on life. Product dimensions are 8.15 X 3.74 inches.

Brand: Vever

👤If I had noticed it first, I would have picked a different product. It fits perfectly on my MMX 300. The quality is excellent. The snaps on the end don't go to the corner, and I wish I'd noticed that. I didn't think about it until I put it on, and noticed that the headband corners were Flare up on the headphones. The flare is visible on my first photo. In my second photo, compare the position of the edge snaps between the original headband and the replacement headband. I should have noticed that the snaps are chrome, as compared to my original snaps being black, because it's not a mark against this headband. I'm not going to return it because it's perfect, and it's not like anyone sees me in these, so the flare out isn't a big deal.

👤The problem is that one of the pins on the headband refused to tighten, so it didn't fit on my beyerdynamic dt770 pros. Installation was difficult because it was hard to wrap and close the headband on my headphones. It is difficult to adjust the length of the headphones when the headband gets in the way. Would I buy it again? I needed a replacement for my headband cushion. This product may be a bit hard to adjust, and it may be a bit annoying to install.

👤Product fit perfectly on my cans. I read that one reviewer thought it was too tight and he must have been smoking something good that night. It's a bit better than the stock ones that come on them. This headband holds its own and I have two. The previous owner of the DT880 installed a very large pad of glue that nearly tripled the thickness and it was terrible. I decided to take a chance after learning the shipping cost on an original from Beyerdynamic. I would like to upgrade my 15yr old headband since it has seen some hours. Don't be afraid to try it out on cans. You'll be happy about it.

👤It works perfectly with my BD T1 (2nd Gen). There is a I had to remove the original cover layer that was falling appart and leave black specks of material everywhere. There is a I had to remove the foam cushion from it because it was a bit sticky. There is a It took me 2 minutes to put on the replacement. No tools needed. It fits like a glove. I would recommend it to my friends.

👤I wanted something that was a little softer. I decided to look around because it was getting worn out. There is a This option was very cheap. It's been on my headphones since August and has no quality issues. It hasn't worn out early, hasn't been weird, and it's not uncomfortable at all. It's cheaper than the headband that came with my DT770 Pro's, and it's better. There is a It wouldn't take much to get it on, even though the installation is a little frustrating. I don't think you want it to be loose either. I wouldn't criticize the product for how it is.

2. Soundlink Universal Replacement Protector Headphones

Soundlink Universal Replacement Protector Headphones

The package contents are listed. A headband cushion. The alcohol pad is x2. The headband cover is compatible with most of the large-sized headphones. Protect your headphones from dirt and sweat. A smooth surface and comfortable touch can be provided by high quality durable material. Excellent match, follows the shape perfectly. It's easy to install and use the durable zip closing. The package includes a headband cover for headphones.

Brand: Txesign

👤After a few hours of use, the headband on the Virtuosos hurts the top of my head. Hopefully this will make up for the issue. If the pad didn't have the tag and hoop, and the zip was a little better quality, this would be a 5 star review.

👤I have only had this headband cover for a few days, but it works perfectly for my headphones. The 2 1/2 inch width is the largest one. It's comfortable and distributes weight more evenly than just the headband, which is why it fits Focal headphones like a glove. It's important for heavier headphones. It has grey and red accents that match my headphones. Time will tell if it holds up, but it definitely feels sturdy. I bought it to prevent the foam on the headband from degrading, because it feels more durable than the stock foam. You don't want to have to replace the headband after you wear it, so consider this.

👤This is for the Corsica Islands. I wear my Corsair Virtuosos for 3-4 hours a day, but 7 to 10 hours grand total isn't out of the question. I spend most of my day at my PC. While I have a lighter pair of open back Koss UR40s, I prefer my Virtuosos for their closed back feel and the convenience of being wireless. The caveat? I decided to get some aftermarket padded earcups and the 1-8/9" cushion pad after seeing some positive reviews, because the Virtuosos are very uncomfortable in their stock form. Now? I can wear my Virtuosos all day long, and they don't make me miserable. I think this investment is worth it.

👤I was looking for a cover to help my headphones because the leather material on the headband was peeling off. I didn't want to look like I had a big case of it. I wanted a cover that matched my cans' white/silver/gray color scheme, and I didn't want the knitted covers that looked like sweaters for the headphones. There isn't a lot of reviews for this headband cover yet, but I took a chance on it. It worked out great. It protects the parts I need. The materials look nice and match my headphones' colors. There is a The zip up felt cheap and had a hard time staying together when I tried it. The trick that worked for me was to use one hand to hold down the end of the zip up. There is a The Small size fits well for anyone who has a V-Moss CrossfadeLP. The cover is too small at first but you have to stretch it. Trust me, it works. It takes some skill to wrestle it on, but the cover works well.

👤I like that the cover fits perfectly on the band, but it doesn't give me enough resistance as the headphones slide off my head, and it doesn't have enough padding to raise my headphones high enough to fit on my head. I need to place a headband on the crown of my head to make sure my headphones sit high enough to cover my ears, but they don't stay on the crown of head. I was hoping that the cover would add padding to make headphones fit properly. The cover does what it is supposed to, but not what I wanted them to do. I would like to find a cover that has more padding on the head-fitting side. This product should do the job if you are looking for a cover for your headphones. I ordered the 1 1/2” W Cushion Pad for the headphones and the cover, which is on the underside of the band.

3. SCR Headband Compatible Replacement Headphones

SCR Headband Compatible Replacement Headphones

The HD280, HD 280 PRO, HMD 280, HMD 280 PRO, HMD280-XQ are compatible with the Sennheiser headphones models. No tools needed for a quick and easy replacement. The material is high quality. The memory foam has a comfortable fit.

Brand: Scr

👤The old headband on my computer needed to be replaced. I took one star off because it is manufactured straight and doesn't have a slight curve like the original did, which causes it to be a little squishy in the middle and for the ends to be lifted up. This is not a big deal. There is a stock headband next to this item. Since this is the only replacement I've been able to find, I would definitely recommend it.

👤I bought these along with a new set of headphones because they were less expensive than the factory-replacement which cost more than half of a new set. I didn't want to spend $50 on padding when my HD280's broke where the ear-cups extended. It's better to replace the whole unit. The price of these pads made it attractive to fix up my old pair and get what I can out of them until they fail. There is a The padding works like the original. It is comfortable. The material that holds the ear pads to the ear cups is a bit thinner and less durable than the other materials. I thought it might be due to hardened plastic, but when I compared it to the ones on my new set, it was not the case. Time will tell how well they will hold up. I won't complain about the price difference. There is a The ear cups have a challenge stretching the plastic over and into the slot. The company has directions. Work it around on a narrow end. Be careful and patient. I had to work it around for a while before the pads were fastened. The comfort is restored after that. There is a The top pad is easy to install. There is a We are very satisfied with the product and price.

👤I'm confused by the reviews. If you don't care about sound quality much, they're a good replacement. Why did they buy HD-280s? There is a I stopped giving them a thumbs up because they're not too much trouble to get on and they're comfortable like the originals. The sound quality is degraded because the internal foam is not as dense. I can hear more noise coming from outside. I'm looking for new headphones after I submit this review because the sound quality is so bad. The pleather feels cheaper and less durable, but we'll see how it holds up. Update- Another star was removed. I kept the new headphones in the mix because they're the same as the ones I bought. They may follow the dodo bird because of this foam replacement. The speaker surface is resting against my ears as the foam collapses. This is not a replacement foam. It's just a resemblance.

👤The headband padding on the old model of HD 280 Pros was very uncomfortable to wear for a few minutes and it was a decade ago. It was difficult to find the original part for this model, but this headband seemed to fit. It took a bit of effort and I'm not sure I lined the fastening completely, but it does fit and doesn't seem to slide around.

4. Headphone Headband Cushion Replacement Sennheiser

Headphone Headband Cushion Replacement Sennheiser

Replacement headphones for the HD580/HD600/HD650. It is high elasticity, durable and soft. It's possible to make a replacement for your beloved headphones. It is made of high quality foam. Please note that it is not included in the note. The approach is 7.24 x 0.91 x 0.55.

Brand: Jzliner

👤I bought a used pair of 650s a few years ago and decided to get a new one because the headband was losing its shape. These were less expensive than the genuine ones, so I went with them. I was worried I would have to use double sided tape to attach them, but to my surprise, the headband that comes with the HD650 does not, so I am not sure if this applies to other models too. You need to remove the tabs from the old headband and say 'Made in Ireland'. The headband's base was the same as the one I was wearing, so I was able to slide it in and pop the tab back on. I've never felt a new genuine Sennheiser pad, so I can't compare the comfort to this, however it is a little bit firm. I'm not sure if that's just because I'm not used to it or it needs to be broken in, but it feels fine to me.

👤I got this along with some new ear cups to completely refresh my headphones. After 15 years of use, my original foam headband piece was flattened. The replacement band fit perfectly and restored the headphones to their original level of comfort. It was almost a shocking change as I no longer have the headband sitting on my head. Installation was easy. It wasn't easy either. If you're replacing the foam ear cups at the same time, I would recommend pulling out the old ones first so that you have more room to work on the headband. Not a problem if you don't. It will work better. To remove the old headband, you have to pop out the two tabs at the bottom of the headband that say Made In Ireland. They can be pried out with a tool. It takes a bit more force to pop them out than I was used to. I got them out without breaking anything. When you pop them out, you don't want to shoot them across the room. The old band can be pulled out once the tabs are out. You can see that it's sitting in two grooves on the headband part. The headband needs to slide into those grooves. It's not easy to get it all the way in there, but you can do it with a bit of pushing and pulling. You'll need to slip the screwdriver blade under the new band to get over the hump because there's a lever in the way. It should be easy to get the rest of the way once you do that. I thought the extra part at the end of the headband would sit under the tabs, but that's not the case. The headband is long enough to just touch the tabs, but not under them. You can pop the two tabs back in once the new headband is slid all the way in. The new foam headband will be much bigger than my old one, so you'll have to expand the headphones a bunch of stops.

5. Universal Replacement Protector Compatible Headphones

Universal Replacement Protector Compatible Headphones

Excellent matching: Follows the headphone shape perfectly, use as replacement or upgrade headband pad for improved listening comfort. The headband should be given the best protection. The headband cover is compatible with most brand size headphones. Protect your headphones from dirt and sweat. A smooth surface and comfortable touch can be provided by high quality durable material. Excellent match, follows the shape perfectly. It's easy to install and use the durable zip closing. The package includes a headband cover for headphones.

Brand: Txesign

👤I'm not sure if this is working or not. My new beats pros hurt my head, and I bought this to make them more comfortable to wear for long periods as I wear them sometimes for up to 12 hours a day between being online for work and school, and more often than not they still hurt. It doesn't feel like there's a lot of padding on this when it's on my head, so I'm still having some problems I have been taking to wearing a beanie or scarf instead of this on my beats. There are other ones that have more padding and will be more comfortable. If you have beats pros where you have to close them to turn them off this can be awkward.

👤I ran into a good sale price for a set of Rosewill ANC headphones. The cans have 40mm drives, a modular 3.5mm audio input, and can be switched on/off. There is a small loop in the middle of the protector that allows one to hang headphones on a hook. There is a The integrated headband cover on this set is one of those PU 'leather' shaped things that look nice, take little space when carried portable, but they press harder against your head than most of the wider flat-shaped bands. The headband is made of smooth PU leather. I was amazed by the quality of the headband protectors I received. The headband is well sewn together, stretchy to some extent, and the protectors are 1.5 inches wide in the padded area, so they stay on the headband securely. There is an anti-slip padding on the bottom of the protector. This part goes against you. It feels soft and prevents your headphones from twisting. There is a This cover enhances and improves my headphones. It seems to fit more headphones than the description suggests. The described item will fit well if the set comes with an 1.0" wide headband.

👤I had a pair of Koss headphones that I used to practice my guitar. I ended up with black particles in my hair every time I did this. I was looking for something to cover the headphones. There are a lot of these out there, but not for Koss. Most of the ones I found were too long. I decided to take a chance on them after finding them. These were correct, as Goldilocks would say. I really like them. They went on without a hitch, they feel nice, and I like the color. I'm only wearing these in the room where I play the guitar and they don't matter what color they are. I don't think they look bad. The Koss like these because they are longer on the underside and shorter on the top. They don't get in the way of folding or adjusting the headphones. I would recommend them to anyone. They are a good product at a good price. They solved my problem. You will not regret buying them.

👤I have headphones that are too big for my head and I wanted to add padding to them. This item doesn't have foam padding. It has a strip of thick fabric that only provides a small amount of padding. It seems like a nice product, but I bought it because I need actual padding, which this does not provide.

6. Geekria Headband Replacement Sennheiser Headphone

Geekria Headband Replacement Sennheiser Headphone

The ear pads are made with high quality foam and mesh fabric. Give your headset a new accessory. It should be a brand new look. Product dimensions are 7.28 x 0.98 inches. The package has a headband cover.

Brand: Geekria

👤The band on my head is very comfortable. I hope this head band lasts longer than the original head band. The memory form deflated because the original head band was deflated. The price and the comfort are not inferior. If this head band lasts a long time, I might order another head band.

👤The plastic backing and the stretch cover are starting to split after a week of use. After a few more days of usage, the whole thing fell apart.

👤I hated the original pads. It gave me fatigue and hurt the top of my head. These pads are amazing. It was very comfortable. I forget that there is something on my head.

👤My headphones are semi comfortable for an okay price.

👤It's much cheaper to purchase one from Amazon.

👤I bought this pad because my original one is still going and I saw this pop-up, which is a huge difference. It was worth the price.

👤I have used HD650 for about 10 years and it has almost lost its shape. I decided to buy this cushion and it fits perfectly. There is a It's easy to replace the removal procedure that you have to search for on the internet. Highly recommended!

👤My original headband had worn out, so this replacement was a good choice.

👤The padding in the headband of my HD 650 has become flat and pathetic after many years of use. I decided to give this headband a try because I didn't want to pay a steep price for a replacement. It feels just as good as the original padding. It's easy to install, just take your time with a soft pry tool to remove the plastic retaining clip from the headphones. It is recommended.

👤Amazon exclusivamente por la rapidez y bajo coste del envo, ya that tienes similar al reCAMbio original. El embargo la almohadilla. tan slo durante el proceso de colocacin en la diadema del auricular. Esto no ocurre. There is a Recomiendo, ya demuestra ser ms duradero. No es ms caro.

👤In realta' e' considerata compatibile anche con HD 580,600,e6XX. La sto usando proprio ora, uguale a quella. Avevo provato anche la compatibile, a mio modesto giudizio, sono migliori. Consigliate.

👤I decided to get this version instead of the one that came with the HD600s because I like it a lot and the old padding was completely flattened out.

👤Sostituisce perfettamente l'originale, indistinguibile, vedremo con il tempo, per quanto l'originale.

7. Replacement QuietComfort QC35 II Headphones

Replacement QuietComfort QC35 II Headphones

The cover is not made by Original Brand Inc. Make your QC35/QC35ii great again! The QC35 ear pads and headband have seen better days. Don't let your $350 investment go to waste. These ear pads and headband pads are here to help you get back to jamming to your beats. When your headband wears out you will really feel the pain, but old worn out ear pads can make you uncomfortable. The ear pads and headband kit uses soft high-density foam and smooth leather that will fit your ears and head for personalized long- lasting comfort. Get lost in the music again if you save your headphones. Replacing the QC35 headband is a priority, and the performance you want is the new QC35 ear pads. The thicker rim of the replacement pads reduces sound leakage and provides a more secure fit. Their seam stitching increases the longevity of your headphones. Installation is easy, your headphones will be feeling new in no time. The step-by-step video guides will show you how to install the replacement ear pads and headband. You can find the video link on the product insert or the guides on the internet. Search for the words "AHG V3 Headband for QC35 and QC35 II - Installation" You are getting 2 new ear pads, a replacement ear pad, a V3 headband, and a mini screwdriver. All you have to do is provide a pair of scissors and some elbow grease and your headphones will be back in business.

Brand: Accessory House

👤The replacement headband and ear pads package was what I needed, but I would have preferred silver or brown. Maybe next time. I use my QC35s every day for music, hearing protection, and as a quasi-invisibility cloak. This was the first time I had to change my headband because it had become too grungy for professional communications in a real estate environment. I was hesitant to buy this package because the headband is not the same as the original, however, I am entirely pleased with the result. There is a The included literature gave me all the guidance I needed, and I was able to follow along so quickly that my new headband was already in my possession. I was able to discard the screw that became damaged by the screwdriver because I found an extra screw in the packaging. I will probably replace the included screws with the original ones. There is a My Bose QC35s fit better now. I think I will replace these ear pads and headband again before my headphones finally succumb to the ravages of time, and I will probably order this package again, maybe next time in something other than black.

👤The install went well. I watched the video as instructed by the seller. I had a headband issue at the end, but I resolved it. The leather was starting to peel off as I could see. I can feel the headband push on my head when I first put on the Bose headphones, which is a good thing. It is more stiff than the Bose original. I don't feel it anymore after a few seconds. There is a I ran into more trouble with the earpad replacement. I've had a lot of experience with earpad replacements, but never had this much trouble with a new one. The seller's ear pads are too stiff. The ring is under the mounts. The ring is so rigid that it is almost impossible to tuck under the tab when wearing the ear pads. I had to redo the earpad 3 times because the leather started tearing. I think the quality of these earpads are not as good because I have never had a tear on a new earpad. I was able to glue the tear. Things worked out in the end and I now have a new pair of headphones. I don't feel like I'm wearing it at all after wearing the headphones with the seller's replacements.

👤I feel like it does a good job at muffling sound and doesn't interfere with noise canceling, it is as comfortable as the original. I use my Bose QC35 II for up to 16h a day and these replacements have been holding on for over a year and I decided to buy them again. The headphones are easy to install with the tools provided, but be patient with the headband since you need to close it over a curved surface, but the headphones look like new. I sewed them until I got a replacement, but when they start to peel off they might open and expose the foam, so I kept using them.

8. Sleep Headphones Perytong Ultra Thin Meditation

Sleep Headphones Perytong Ultra Thin Meditation

The charge time is 3 hours full charge and 15 hours play time. Sleep headphones, a sleep mask, and a sports headband are included. You can enjoy hands free music, and protect yourself from being disturbed by your hair and sweat with a soft headband and wireless sleep headset. Sleeping headphones sports headband is perfect for sleeping, as well as exercising. The cool tech gifts for men and women are the headband headphones. Sleep headphones with built-in 2 ultra-thin speakers and a control module in the middle of a sleep headband are perfect for side sleeping. Sleeping headphones are comfortable to wear while sleeping. Choose Perytong sleeping headphones, fall asleep fast, stay asleep and have a sweet dream, they block out ambient noise without using earplugs that are painful and fall out. Their headphones have an advanced battery that can work more than 10 hours and only take 1-2 hours to charge. The sports headphones have a quality chip with fast paring speed, less power consuming, and a stable clear sound. The headband is made of braided cord and has a mesh lining that is extremely stretchable and fits most head sizes. Remove the control Pod first before you can use the headphones. Cool gifts for Thanksgiving Day, Christmas Stocking Stuffers, Secret Santa gifts, Birthday, Mother's Day, and many other occasions. Perytong has upgraded the headband for the sleeping headphones for a better and stable sound, made it elastic to fit most head sizes, and adopted a light fabric material which feels cool on the skin. If the sleeping headband phones you received are malfunctioning, please let them know so they can give you a free replacement. If you have a problem, please contact them.

Brand: Perytong

👤The title says it all. My partner snores to wake me up. He snorts, gurgles, gasps and snuffles while I lay awake imagining all the ways I could murder him because I cannot fall asleep due to his loud bellows. Enter the stage. The perfect headphones for sleep. When I tried to sleep on my side, my earbuds hurt like crazy. I was worried that in a fit of rage, I would wrap the wires around my partner's neck so I could not hear him. I found these headphones at 3 in the morning and thought, "Why not?" They. Are. Awesome. I can sleep with my headband on. The volume control is great. It doesn't completely drown out the loud noise from the partner but the stream of sleep music I listen to combined with the comfort of the headband allows me to fall asleep and stay asleep. I can't recommend them enough. They have kept me out of prison. A win-win.

👤I love these! I've been suffering from insomnia for over a year. My husband snores loudly. I have tried a lot of things, including regular ear buds. Nothing else was working, so finally broke down and bought these. I am so happy I did. I wore sleep headphones for the first time last night and fell asleep quickly. I put white noise on my music to drown out snoring. If you have trouble falling asleep, try these. They were easy to use and comfortable. The instructions were easy to read and quite detailed. There is a The photo was taken this morning and it shows a happy person.

👤I am going on a cruise in a few weeks and I love my husband but he snores. I spend a few nights a week on the couch because I can't get him to stop. It will be frowned upon to fall asleep naked on a couch. I realized I needed to find something. I don't like traditional ear plugs. I thought about buying these for 3 weeks. These will be bad, or they won't fit in my head. I realized that I was running out of time as I neared vacation. I decided to buy them. They arrived in a day. I put on a sleep meditation album from my phone after I got them home and was asleep. When I woke up in the middle of the night, I turned the music back on and fell asleep. I can fall asleep because it makes this more prominent. It was very comfortable. The bass is really good on these. If you're looking to drown out your partner due to snoring, this is a great, affordable, and quality product that you should buy.

👤It's easy to fall asleep to music with this product. I am usually a side sleeper. Since I like to listen to music to help me fall asleep, the other headphones that I have are too large to fit on my side, making it uncomfortable. I was excited when I received this headband, because it allowed me to lay on my side to fall asleep, and it kept my hair off my face and neck. I connected my phone to the internet. I was worried that I wouldn't be able to wear glasses with the band, but it is still comfortable. I would highly recommend this product.

9. Replacement QuietComfort Headphones Protector Installation

Replacement QuietComfort Headphones Protector Installation

There was no tool needed. Zip up in place if you want to fit over the original headband. Don't remove the headband. Can be used to protect your headband. Product dimensions are 6.8 x 3.3 inches and color is black. The package has a headband cover.

Brand: Geekria

👤What a great product. It matches even though it is not an original design. It's easy to install the zip up. There is a loop to hold the tab in place. There is a The product photo shows a top. I like having the zipper facing back so it is not visible from the sides. The elasticity of the neoprene material doesn't bother me at all because the zipper is a bit crooked.

👤I use my headphones when I travel. I noticed the headband was black when I hadn't traveled in over a year. I was thrilled to find an easy solution to the problem because I had already replaced the ear cups. I wanted to keep the old headband. Once you get the zipper seated, it's easy to install this cover. The headphones still fit in the case even after the cover has been installed. The cover is comfortable when the headphones are being used. I made sure to put it on the back side of the headband so that it wouldn't be obvious when you are wearing the headphones.

👤This is not a perfect replacement since it is not the same as the original Bose product, but it does cover up your headband. It is not a deal breaker and I can definitely recommend it. It was difficult for me to line up the track completely so that it wouldn't fall apart, but I was patient and it pulled up. I put the seam toward the back so that it's not visible when wearing the headset. I chose this one because the ends of the product have a finished seam giving it a more polished look.

👤I bought new ear cushions for my Bose headphones and Amazon offered them as an add-on. The headband had not deteriorated as much as the ear cushions, but I figured I'd get this as well. Especially at the low price. It was easy once I figured out a trick, but I have a bit of difficulty getting it on. I started the metal extension over the headphones. I was able to pull the head piece and complete the zipper after I got the zip going. There is no pain because the zip up sits on the top. There are still headphones in the case.

👤I use these as padding for my bare plastic headband. They make the headphones more comfortable to wear. These fit the headband on the Sony. They can be hard to install. You have to get the zip on the small one by threading it correctly and completely at the end. The cover wants to flop open all the time. If you use duct tape or a cable wrap to close the far end, you can keep the two sides of the pull together. The covers have not come undone once they have been put in place. They look like an accessory that was included with the original headphones.

👤I put this on my headphones. I have a small head, and the headphones slid around too much for me. I put a couple layers of packing foam on the bottom side of the headband after purchasing this cover. It had a perfect fit after being clipped onto the headphones. If this hadn't worked, I would have returned the headphones.

10. Replacement Headband QC2 QC15 Headphones

Replacement Headband QC2 QC15 Headphones

The package has a headband cover. The full product description and installation video should be read before you start. O-Ugm2RAssU can be searched on you tube. It's necessary to make your own skills are required! They don't think you'll buy this product if you're not compatible with it. It was made with top quality leather. Specialised headband clips are included in the sale. The finished installation photos should be noted. Your phone will look different after installation. There is a package that includes 1 headband, 2 lips and a screwdriver. You will need scissors and a chisel to finish the job. These are not included in the sale.

Brand: Accessory House

👤The original headband cushion was placed onto the headphones during assembly, meaning once you cut it off, there was no way to put a new one on. There is a Don't worry about the zip that you see, this is a great design. If you have good skills, this is an easy replacement that looks great. The headband is comfortable. I tested it on a flight and it was just as comfortable as the original and fit in the case the same way. They have a video on line that you can watch and they also have a screwdriver that is very easy to use. The old headband can be removed with a scissor. The rest of the replacement can be completed with their included screwdriver. If you are familiar with the steps, you should watch their video at least once.

👤At the conclusion of my last international flight, I noticed that the top half of my body was covered in black. After 9 years, the foam of my Bose QC2s had begun to break. It was gross! I ordered replacement earpads on the Bose website. It seems like a major oversight by Bose that they didn't carry a replacement headband. It was only a matter of time before they carried replacement headbands and from three suppliers. I got in touch with Ron of Ron's Electric Sales about which one I should get considering that all three had high ratings, and he suggested that I get the accessory houses and the installation video was located at: I asked Ron if he could install the headphones for me because I didn't want to ruin them. He agreed to document the process with pictures and video and gave me his personal phone number in case I had any concerns. The replacement took only a week between when I sent him the headphones and when I got them back. There is a The quality of his work and replacement headband are both excellent. The plastic replacement clips are slightly different than the original Bose ones, but unless someone is looking really closely, they wouldn't be able to tell that the headband was a replacement. Ron's headband fit perfectly into the clips, with no issues like the ones that people had with Headcase Audios and HeadphoneMates. I was able to compare the material of Bose earpads to the accessory house headband after I got the replacement earpads. They are both made of foam. The Bose earpads are soft and comfortable, but the accessory house foam is just as soft. I am happy that I was able to give my QC2s a new lease on life, as the electronics were still going strong. Ron's service and support are both excellent and the accessory house replacement headband is a high quality solution to the problem. I highly recommend anyone who is in need of a replacement headband to check out accessory house.

👤It was a great fix. I replaced my ear cushions but on a recent trip, I saw black marks on my shirt and headband, and realized that they had deteriorated. The headband is a perfect replacement. There is a The installation video doesn't explain the tip that you should tuck the ends into the new clips. The video doesn't explain it well. I didn't realize that until I tried to put things back together. The "head" ends of the zipper go into the clips. The new clips have a bulge in them. The bulge on each side will not come un-done if the ends are done right.

11. Replacement Headphone Audio Technica Panasonice Installation

Replacement Headphone Audio Technica Panasonice Installation

The package includes a headband. Most of the big-sized headphones are compatible. Quality materials and design, made of high-quality knitted fabric. Improve the comfort of headphones. It is easy to install a headband without tools. It can be washed by hand or machine. The headband cover for the headset can wrap the headphones beam. The package contents are listed. A headband cushion. The alcohol pad is x2.

Brand: G Gvoears

👤The Corsair Gaming H2100 headset still works great, but over the years the leather covering on the headband had started to chip, so I didn't want to use them anymore. I was covered in black particles when I put them on. I ordered this to fix the problem, and it did. I took a toothbrush to the original headband and used a cover to cover everything. It was a tight fit, but works well. It looks good, but it's not as comfortable on the top of my head as the original headband is, but it's not bad. I'm no longer covered in black.

👤The cushion on my headset is terrible. This is more of a covering than a cushion. This will hide the scratches or cracks on your headset.

👤I was looking for a quick and easy solution to repair my Audio Technica A50s, and this truly delivered for something that does not require sewing. There is a The material is stretchy and easy to install. The headband cover was cut to length and tucked under the edge clips for a clean look, but I did not do it myself. The color of the clasps is something I don't like. The cover still looks good, even though I wish they were black. I like cloth over leather because it's easy to clean. The cloth ear cups I got have given my headphones a new lease on life. If I decide to add padding to my headphones headband, I might buy this cover again. There is a This is a quality product that you will not regret buying.

👤This thing is a simple cover over the headband. If it fit well, there are bumps on it where the fabric isn't sitting right, and it's digging into my head. It's making my head hurt after about a month of use.

👤The headband cover is easy to use. The headband overhangs the end of the plastic headband and is too long for M50, so it's the main challenge. It's not noticeable when I wear the headphones. It might be a deal breaker if you are a visual perfectionist. They have been great. It's difficult to make a product work.

👤This adds no cushion at all. I have dish rags in my kitchen sink that would provide more padding. It's a cosmetic upgrade. I own an Audio Technica -M50x. The product has to be stretched so much to get around the headband that it's not as thick as it appears in the pictures. I can't even add my own padding to the stock headband because it gets compressed into a solid mass and is just as bad as the super tight stretching. It's disappointing. I can't recommend this product because it's currently advertised.

👤I tried the package for a full day. Installation is easy. I will have to see for myself if the material is elastic and hard enough to hold for a long time. If my impression changes in the future, I will update. My suggestion to the seller is to make the whole cover 2 cm longer so that it covers more of the headphones. If the buttons are inside, it will be more elegant. I am a pro- user. I'll be happy to purchase more and recommend it to my colleagues if these suggestions are actually done. There is a I highly recommend it for most AudioTechnica headphones. I have never tried it on another, so I don't know.

Summary

What is the best product for headphone headband pad?

Headphone headband pad products from Vever. In this article about headphone headband pad you can see why people choose the product. Txesign and Scr are also good brands to look for when you are finding headphone headband pad.

What are the best brands for headphone headband pad?

Vever, Txesign and Scr are some of the best brands that chosen by people for headphone headband pad. Find the detail in this article. Jzliner, Txesign and Geekria are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com