Best Headphone Headband Replacement

Headband 6 Dec 2022 10+ Comments Open

1. Headband QuietComfort Headphones Screwdriver Replacement

Headband QuietComfort Headphones Screwdriver Replacement

The ear pads are made with foam and leather. Give your headset a new accessory. It should be a brand new look. Product dimensions are 5.91 x 1.10 inches (15 x 2.8 cm). The package has a headband cover.

Brand: Geekria

👤It is easy to install and looks good. Make sure to cut out the original headband on the outer side so you don't damage the original foam cushion. You can still install a new headband on top of the original foam cushion, but it makes it better. The easy assembling process is something I like. I wish the finish was a bit more discret on the edge. A nice little driver was included.

👤The Bose Soundlink is not compatible, but I decided to try it out anyway. The only complaint is the small holes on each end, but it doesn't bother me. The tool it came with made it easy to install. It took less than two minutes. I attached the photos for reference.

👤I was expecting a better product than the Bose headphones I received. It was very difficult to install because of the holding of the headband in place, putting the brackets on, and installing the tiny screws. I'm not happy with how the headband looks now that it's installed, but I guess it's better than the old headband, as long as it stays in place.

👤It's easy to install. I only had to take off the old sleeve for 5 minutes. It is very soft and cleans better than the headphones.

👤There is a huge comfort difference. If you really use some muscle, you can keep the old cushion on. It was worth it. Looks good.

👤It is very easy to replace. The magnetic screwdriver made supper easy.

👤It doesn't fit around the headband. You can see the giant connection.

👤You just wrap it around, no need to disassemble it.

👤The headband does look good once on. I didn't have instructions on how to install it, but I have done a number of similar repairs over the years and they all follow the same steps. I didn't have any issues. The band wraps around the headphones and closes with a piece of velcro. The Bose clips secure it and hide the ends. The seam where the band is attached to itself is visible in the pictures, but I made it face back to hide it. I have it on my headphones for about 24 hours, but it's so good that I can't say how long it will last. If it starts tearing, I can replace it again.

👤Is it meinem? Bose QC 35 ist, das ist. Ich bin in der Bild gestoen. Hilfe is the des alten. Im gut ist das anbringen. The Montage war gerade. Leider ist das Polster. The Abzug is called the "Stern Abzug". Klett Kante ist es fr die stark. Strt visuell.

👤The handband is good, but they send the wrong screwdriver. I can't replace it. The company sent the correct screwdriver and the headband fit perfectly.

👤It is easy to install and looks respectable. When cutting off the old headband, be careful not to damage the wire underneath. You can watch a video online to see it done.

👤The Ersatzband passt nahezu perfekt. The versprochene. Im Preis wenig berraschend ist war leider.

2. Replacement Headband Connector Compatible Headphones

Replacement Headband Connector Compatible Headphones

State-of-the-art, flexible and replaceable. The boom microphone provides crystal-clear in-game voice communication. This product is the same as the original one, to replace the studio 3 hinges, make your headphones work in a good condition. The product is made by KAPON, it doesn't bear any trademark owned by the Original Company, and the seller is not affiliated with the Original Company in any way! During the 12-month warranty period, they will provide a free replacement service for any quality problem.

Brand: Kapon

👤If you choose to unsolder the wiring and install them the hard way, or if you like me, you'll love these. I decided to remove the thin bar so I didn't have to take the hard route. I think they will hold up over time, because they were installed nice and tight.

👤The whole set came apart when one of the screws at the hinge fell off. They would fall apart whenever I tried to put them on my head. I sent my headphones to Apple and they tried to charge me $200 for repairs. I said no. I easily added a screw after finding these online. I can take my beats anywhere.

👤I might have bought the wrong part, but this seemed to work. I will need a new headband to fix the broker hinge. This will be great for you if you just lost a screw.

👤The only thing I needed from this kit was the screws. The main part wasn't in the same color as the other parts. It was still worth the buy because of the unusual screws and the fact that I wouldn't have been able to fix my headphones without it.

👤If I knew how to put it in, it would be very easy. I saw a video on YouTube that showed you how to put it in. Don't buy it if you don't know how to do it or you don't have someone that can do it for you.

👤I own the gold plated Beats 3. The only way I could get the 2 screws was by buying this kit, because the two screws on one side came off. The screwdriver helped. The screws are black and not gold plated, but who cares.

👤The hinge is wrong. It was a poor description. There were no instructions.

👤I need to fix my headphones right now, so I will get the ear pads, they will look new, and you can fix it yourself.

👤It seems to be good quality. All the pieces were described. I ordered the gold ones and my original screws were gold. They are not. They will be black. The photos show black screws, so there is no fault of the seller. It is not important because they are hidden most of the time.

3. SCR Headband Compatible Replacement Headphones

SCR Headband Compatible Replacement Headphones

The HD280, HD 280 PRO, HMD 280, HMD 280 PRO, HMD280-XQ are compatible with the Sennheiser headphones models. No tools needed for a quick and easy replacement. The material is high quality. The memory foam has a comfortable fit.

Brand: Scr

👤The old headband on my computer needed to be replaced. I took one star off because it is manufactured straight and doesn't have a slight curve like the original did, which causes it to be a little squishy in the middle and for the ends to be lifted up. This is not a big deal. There is a stock headband next to this item. Since this is the only replacement I've been able to find, I would definitely recommend it.

👤I bought these along with a new set of headphones because they were less expensive than the factory-replacement which cost more than half of a new set. I didn't want to spend $50 on padding when my HD280's broke where the ear-cups extended. It's better to replace the whole unit. The price of these pads made it attractive to fix up my old pair and get what I can out of them until they fail. There is a The padding works like the original. It is comfortable. The material that holds the ear pads to the ear cups is a bit thinner and less durable than the other materials. I thought it might be due to hardened plastic, but when I compared it to the ones on my new set, it was not the case. Time will tell how well they will hold up. I won't complain about the price difference. There is a The ear cups have a challenge stretching the plastic over and into the slot. The company has directions. Work it around on a narrow end. Be careful and patient. I had to work it around for a while before the pads were fastened. The comfort is restored after that. There is a The top pad is easy to install. There is a We are very satisfied with the product and price.

👤I'm confused by the reviews. If you don't care about sound quality much, they're a good replacement. Why did they buy HD-280s? There is a I stopped giving them a thumbs up because they're not too much trouble to get on and they're comfortable like the originals. The sound quality is degraded because the internal foam is not as dense. I can hear more noise coming from outside. I'm looking for new headphones after I submit this review because the sound quality is so bad. The pleather feels cheaper and less durable, but we'll see how it holds up. Update- Another star was removed. I kept the new headphones in the mix because they're the same as the ones I bought. They may follow the dodo bird because of this foam replacement. The speaker surface is resting against my ears as the foam collapses. This is not a replacement foam. It's just a resemblance.

👤The headband padding on the old model of HD 280 Pros was very uncomfortable to wear for a few minutes and it was a decade ago. It was difficult to find the original part for this model, but this headband seemed to fit. It took a bit of effort and I'm not sure I lined the fastening completely, but it does fit and doesn't seem to slide around.

4. Genuine Sennheiser Foam Headband HD650

Genuine Sennheiser Foam Headband HD650

The headband is a new Genuine Sennheiser replacement. The headband pad will fit some models. The headband pads are made of soft material.

Brand: Sennheiser

👤The headband pad is worth the money for a replacement part. They look to be of great quality and are very comfortable. The HD 6XX style pad is still available. I'm not disappointed because they fit the 580s perfectly. It took a few minutes to install. You only have to use a butter knife to pry up one of the headband retainer clips on the underside of the headband, slide the old pad out, and then snap the clip back in place. If you're not completely confident in what you're doing, you may want to look for a video on the internet.

👤It made my HD-580s feel new. I have owned the 580s for 14 years and this simple replacement really makes a difference. The cushion was flattened. The plastic band on my head puts the speakers in a different position. The speaker cover had a hole in it and metal was touching my ear so I replaced it with a new one. The 580s are new. It's easy to install following videos on the internet.

👤The old pad was wrecked and now is much more comfortable. I should have checked on the website of the company, they sell the pad directly for about 1/2 the price. The seller is entitled to make money. I'll buy pads from Sennheiser direct, thank you very much!

👤If you want to replace this, don't pull directly on the old headband, you'll get glue on your hands and bits of headband fluff all over the place. If you want to remove the plastic end bit from the headband, you have to slide the cushion out, then clip the plastic end bit back in.

👤The way to go is genuine. The extra cost is worth it. The foam inserts used in the knock-off are denser and less comfortable than the genuine headband that I bought. Don't support the companies that make low quality parts. You think it would be easy to recreate a headband. You can get this genuine part instead of having your head pinched. Big shout out to Sennheiser for their tool-less designs. It's easy to install.

👤My old HD650 pad was so flat that it injured my head. It took me a few days to figure out why I was injured. I ordered this when I realized it was the lack of padding. It is easy to disassemble the HD650, so it is necessary to remove the old one and slide in the new one.

👤I ordered this one because I liked the original one and it was the same headband with original packaging. The price for a piece of pad was ridiculous. There is a There is an edit. The product came with a tear but Amazon was able to provide a solution.

👤The HD 650 headphones were new but without the old style clamps that they had after a few years. Replacing the pads after a year or two will make a big difference. There is a If you ask me, it's worth it to get the original Sennheiser pads.

5. SOULWIT Replacement QuietComfort Headphones Installation

SOULWIT Replacement QuietComfort Headphones Installation

During the 12-month warranty period, they will provide a free replacement service for any quality problem. Only Bose's QC35 and QC35ii Over- ear Headphones are compatible. Don't fit any of the Bose model Headphones. It's ingENUITY. The shape of the original headband has been reproduced using 3D printing technology. The headband should be used with the wrapping cloth. Installation is easy. Their product can fit your headset without the sound unit being disassembled. The outer layer of the headband is made of high-quality leather and nylon, while the inside part is filled with high-density foam, ensuring you extreme comfort. They are continuing to develop more professional and ergonomics headphones. If there is an issue with your purchase, please contact them.

Brand: Soulwit

👤The replacement headband is great because my dog chewed on my headphones. The headband feels more comfortable than the original one, but it's not a good idea to buy a new headband when you pay $300 for a pair of headphones.

👤I have been looking for a replacement for my headband and this product is the best option so far. It was a good solution for the problem. The design of the headphones is not as good as this one. It made my headphones look old. Highly recommended!

👤It's easy to install. It's perfect. It is worth the price.

👤I was hesitant to buy the replacement headband because I wasn't sure if it was the right size or good quality. I was surprised by how good it looked. It looks like the picture. I replaced the old band after watching a couple of videos. It was easy to replace and only took 10 minutes. It will be easier to put them back on if you pay attention to the placement of the clips. There is a The headband is comfortable on my head and I don't notice a difference from the original one. This product is recommended by me.

👤Javais commander un bandeau de remplacement. Mais ce that j'ai reu n'est pas compatible. J'ai pas envie de payer.

👤Le kit de remplacement is minimalist. There is a Mon sque était to us, tant qu'il fonctionne... je n'avais pas pense pouvoir. There is a Le tout relativement facile. There is a Dans le kit, vous change it. There is a Je pense qu'il ne faut pas en car, le éléments sont tellement petits. There is a J'ai beaucoup d'un faut donc, puis des petits charnires. L'ancien élément, vous reclipsez le fil... There is a Tout rentre sur l'ordre. There is a Le tout prend un petit moment. There is a Mais is contente du résultat.

👤Utilisation, remplacement de bandeau. J'ai beaucoup aim, le partie de casque qui est remplacer. There is a The pice n'est pas compatible with the car. There is a Un tout petit. There is a Sinon, c'est un bonne alternative, de conserver le mme. There is a Je conseille mme, et c'est ce that je ferai pour le mien, cette fois-ci.

👤prendre ce bandeau, en vérité il est parfait Agréablement surpris par sa qualité et son aspect. There is a Une notice explicative is fournie. Petit tournevis. There is a 10Mn is the remplacement de mon bandeau. There is a Le faut prendre son temps pour ne pas couper le fils. Une fois installe pas de différence.

6. Linkidea Compatible Headphones Replacement Installation

Linkidea Compatible Headphones Replacement Installation

There was no tool needed. Don't remove the headband. Can be used to protect your headband. The headband cover is compatible with Sony. The dimensions are 7.6" x 4.3" The package has a headband cover.

Brand: Linkidea

👤The headband cover was purchased based on the dimensions stated in the listing. There is a The width of the item I receive is 3.75 inches in the middle and 3 inches on each end. No, where near the stated width at any point. It wouldn't fit on my headphones. The dimensions are close to 7.6 inches as stated in the listing. Hope this information is useful to others. I will have to return it.

👤I bought this after my headband started peeling. It was packaged in a small sealed plastic bag. It was cut perfectly and went on without a hitch. It fits over the old headband and stops where the joints begin. It fits well and doesn't slide around. I think it could have been made more snug so it wouldn't bunch up. The silhouette of the headphones is broken a bit by the bunch up along the zipper. The material feels like plastic and the zipper feels like plastic. The only complaint is how simple of a solution it is and how comfortable it is.

👤I use the Senal SMH-1000 headphones in my sound bag. I replaced the earpads for the sake of comfort, but the original headband was beginning to break. I thought I'd give the SMH-1000 a try. There is a The headband protectors went on like gloves. It was a little bunchy at first, but after tugging it into place and centering it, it fit perfectly. It's nice and comfortable and I don't have to worry about my headband coming off. I'm happy.

👤It works on a pair of audio technica m50s. It has decent comfort. I put a piece of foam under the headband to protect it. It made the headphones more comfortable to wear.

👤I put this on my headphones. I have a small head, and the headphones slid around too much for me. I put a couple layers of packing foam on the bottom side of the headband after purchasing this cover. It had a perfect fit after being clipped onto the headphones. If this hadn't worked, I would have returned the headphones.

👤The headband on my MDR-7506's was starting to wear and this was the perfect protection for it. I don't feel it when I wear the headphones and they are easier to pull off. It feels like it will last a while, the fit is perfect.

👤The headband on my headphones was no longer in working order. I think it's supposed to have a loop to hold the pull, but I didn't have one. It stays put on its own. It was made in China.

👤The solution for a flaming head band is nice, but it can be difficult to open with a bit of tension. There is a It is soft and comfortable once it is in place.

👤The band is moving quickly. It is not well designed for a circular shaped band and there are bumps that affect how the band sits on the head.

7. Replacement Headphone Audio Technica Panasonice Installation

Replacement Headphone Audio Technica Panasonice Installation

The package includes a headband. Most of the big-sized headphones are compatible. Quality materials and design, made of high-quality knitted fabric. Improve the comfort of headphones. It is easy to install a headband without tools. It can be washed by hand or machine. The headband cover for the headset can wrap the headphones beam. The package contents are listed. A headband cushion. The alcohol pad is x2.

Brand: G Gvoears

👤The Corsair Gaming H2100 headset still works great, but over the years the leather covering on the headband had started to chip, so I didn't want to use them anymore. I was covered in black particles when I put them on. I ordered this to fix the problem, and it did. I took a toothbrush to the original headband and used a cover to cover everything. It was a tight fit, but works well. It looks good, but it's not as comfortable on the top of my head as the original headband is, but it's not bad. I'm no longer covered in black.

👤The cushion on my headset is terrible. This is more of a covering than a cushion. This will hide the scratches or cracks on your headset.

👤I was looking for a quick and easy solution to repair my Audio Technica A50s, and this truly delivered for something that does not require sewing. There is a The material is stretchy and easy to install. The headband cover was cut to length and tucked under the edge clips for a clean look, but I did not do it myself. The color of the clasps is something I don't like. The cover still looks good, even though I wish they were black. I like cloth over leather because it's easy to clean. The cloth ear cups I got have given my headphones a new lease on life. If I decide to add padding to my headphones headband, I might buy this cover again. There is a This is a quality product that you will not regret buying.

👤This thing is a simple cover over the headband. If it fit well, there are bumps on it where the fabric isn't sitting right, and it's digging into my head. It's making my head hurt after about a month of use.

👤The headband cover is easy to use. The headband overhangs the end of the plastic headband and is too long for M50, so it's the main challenge. It's not noticeable when I wear the headphones. It might be a deal breaker if you are a visual perfectionist. They have been great. It's difficult to make a product work.

👤This adds no cushion at all. I have dish rags in my kitchen sink that would provide more padding. It's a cosmetic upgrade. I own an Audio Technica -M50x. The product has to be stretched so much to get around the headband that it's not as thick as it appears in the pictures. I can't even add my own padding to the stock headband because it gets compressed into a solid mass and is just as bad as the super tight stretching. It's disappointing. I can't recommend this product because it's currently advertised.

👤I tried the package for a full day. Installation is easy. I will have to see for myself if the material is elastic and hard enough to hold for a long time. If my impression changes in the future, I will update. My suggestion to the seller is to make the whole cover 2 cm longer so that it covers more of the headphones. If the buttons are inside, it will be more elegant. I am a pro- user. I'll be happy to purchase more and recommend it to my colleagues if these suggestions are actually done. There is a I highly recommend it for most AudioTechnica headphones. I have never tried it on another, so I don't know.

8. Defean M30 M50X M50S M40X

Defean M30 M50X M50S M40X

Quality,Worry-Free Service, is improved. They made the headband elastic to fit most head sizes and used a thin fabric that feels cool on the skin. If the sleeping headband phones you received are malfunctioning, please let them know so they can give you a free replacement or a refund. Mistakes happen. They've got you covered. They make sure you have complete peace of mind when shopping for ear pads. They will make a full refund if the earpad doesn't fit. The installation video guide can be found in Figure 7. They can help you. You will get a piece of headband.

Brand: Defean

👤The comfort of my headphones was improved. There was no padding on the headband. The sleeve is perfect for padding. I cut a strip from scrap memory foam to fit. This stretchy sleeve can add about a quarter of a inch of foam to my headphones. I slipped it in and went. I tried adding padding to my m40x's 3 different ways, but this is the best method.

👤The headband on my ATH-M50s wore out within the first few months of use, and I had a pair for a few years. I had to replace them with ATH-M50xbt headphones, which are the same but wireless. I picked this up because it looked like it would fit my needs, I wanted to protect them from wear and abrasion. It was easy to put these on, and they've held up well. I was initially concerned about my hair but it wasn't a problem. It works really well and looks clean and professionally made, but would have liked a thin extra strip over the zip to guard from hair snags.

👤I had my old ATH-M50 headphones replaced with plush memory foam ones which are better all around, but the ear cups lasted only 6 months. The faux leather on the top band has been desintegrating for a while now, and it can really bring you down if you lose the comfort. The solid black won't look as gross as white will if it's wrapped up with this protector. It does the job, it doesn't feel cheap, and will probably last until your headphones die. Why sound quality is an option but not for sound boys?

👤A few years ago, I received a pair of Turtle Beach Ear Force Tango cans as a gift. The sound quality was always good. They were garbage by every conceivable metric. The headband was designed for someone with a watermelon for a head, the battery life was insufficient for long gaming sessions, and the 10 audio preset that you could cycle through were confusingly numbered. The battery was low every 45 seconds. They still looked cool despite all that. I set them up as a neat decoration after giving up on using them. Until now. There is a We recently got an awesome new smart tv from a brand new company, and for some reason, out of all devices, this particular high-end 4K tv from 8 years later, just so happens to pair perfectly with these headphones. After many years of being useless due to issues with PC, PS4, Xbox consoles, various TVs, and basically everything else under the sun... The receiver for these Tangos is plug-and-play and can be connected to the TV via the original optical cable. The audio quality is higher and the connection is seamless. There is a Turtle Beach had one last card. The leather-like vinyl that they used for the Tango was called Absoulute SHIT. One of the ear cups broke in my hands and the headband was torn up, just from normal seasonal temperature changes alone. I was not to be easily discouraged. I was determined to not let these things go to waste. This sleeve and ear pads are suitable for large over the ear headphones. I had to add a bit of foam to counteract the previously mentioned gap as it was difficult to install them both. I was able to take full advantage of these headphones after I prevailed. For the first time, they are actually comfortable. I will be getting the Earpads again at some point for my Steelseries Arctis 5, as they are the best that I've ever used, and they are about the same size. I highly recommend this sleeve to anyone who needs to repair a headband on their headset that they want to save for later in life.

9. Universal Replacement Protector Compatible Headphones

Universal Replacement Protector Compatible Headphones

Excellent matching: Follows the headphone shape perfectly, use as replacement or upgrade headband pad for improved listening comfort. The headband should be given the best protection. The headband cover is compatible with most brand size headphones. Protect your headphones from dirt and sweat. A smooth surface and comfortable touch can be provided by high quality durable material. Excellent match, follows the shape perfectly. It's easy to install and use the durable zip closing. The package includes a headband cover for headphones.

Brand: Txesign

👤I'm not sure if this is working or not. My new beats pros hurt my head, and I bought this to make them more comfortable to wear for long periods as I wear them sometimes for up to 12 hours a day between being online for work and school, and more often than not they still hurt. It doesn't feel like there's a lot of padding on this when it's on my head, so I'm still having some problems I have been taking to wearing a beanie or scarf instead of this on my beats. There are other ones that have more padding and will be more comfortable. If you have beats pros where you have to close them to turn them off this can be awkward.

👤I ran into a good sale price for a set of Rosewill ANC headphones. The cans have 40mm drives, a modular 3.5mm audio input, and can be switched on/off. There is a small loop in the middle of the protector that allows one to hang headphones on a hook. There is a The integrated headband cover on this set is one of those PU 'leather' shaped things that look nice, take little space when carried portable, but they press harder against your head than most of the wider flat-shaped bands. The headband is made of smooth PU leather. I was amazed by the quality of the headband protectors I received. The headband is well sewn together, stretchy to some extent, and the protectors are 1.5 inches wide in the padded area, so they stay on the headband securely. There is an anti-slip padding on the bottom of the protector. This part goes against you. It feels soft and prevents your headphones from twisting. There is a This cover enhances and improves my headphones. It seems to fit more headphones than the description suggests. The described item will fit well if the set comes with an 1.0" wide headband.

👤I had a pair of Koss headphones that I used to practice my guitar. I ended up with black particles in my hair every time I did this. I was looking for something to cover the headphones. There are a lot of these out there, but not for Koss. Most of the ones I found were too long. I decided to take a chance on them after finding them. These were correct, as Goldilocks would say. I really like them. They went on without a hitch, they feel nice, and I like the color. I'm only wearing these in the room where I play the guitar and they don't matter what color they are. I don't think they look bad. The Koss like these because they are longer on the underside and shorter on the top. They don't get in the way of folding or adjusting the headphones. I would recommend them to anyone. They are a good product at a good price. They solved my problem. You will not regret buying them.

👤I have headphones that are too big for my head and I wanted to add padding to them. This item doesn't have foam padding. It has a strip of thick fabric that only provides a small amount of padding. It seems like a nice product, but I bought it because I need actual padding, which this does not provide.

10. Replacement Headband Accessories Compatible Headphones

Replacement Headband Accessories Compatible Headphones

If you have any questions, please feel free to contact them, Adhiper will provide you with a 12-month worry-free warranty. As the same as the original. The headband has the same construction and size as the original, and the color matches perfectly with the headphones. It is the same quality as the original. If you cracked your headband, buy it. Great value for money Extra screws and a screwdriver are included in the studio headband. It was packed with a sponge to prevent it from being scratched during transportation. You can get 120-200 repairs from the original company. There are compatible headphones. The studio 3 headband replacement is for beats by dre studio3 wireless and studio 2 wired/wireless. If you need the studio 3 headband, you can find it by searching "studio 3 furess headband". Headphones will like brand new. You don't have to throw away your great sound quality headphones with these studio 3 replacement parts. They will make your headphones look like you just bought them. Easy to install. Follow the instructions on the website to replace this headband in 5 minutes. A child can do it all by themselves.

Brand: Esen

👤I have had my Beats Studio 2 for almost 5 years and I was devastated when I dropped it on the floor. It was a birthday gift from my husband. This band is perfect and the color matches perfectly, it is easy to change it, just 2 screws on each end of it and a little bit of patience, there are some videos on Youtube showing how to do it.

👤Quality seems to be the same as the original.

11. Sleep Headphones Perytong Ultra Thin Meditation

Sleep Headphones Perytong Ultra Thin Meditation

The charge time is 3 hours full charge and 15 hours play time. Sleep headphones, a sleep mask, and a sports headband are included. You can enjoy hands free music, and protect yourself from being disturbed by your hair and sweat with a soft headband and wireless sleep headset. Sleeping headphones sports headband is perfect for sleeping, as well as exercising. The cool tech gifts for men and women are the headband headphones. Sleep headphones with built-in 2 ultra-thin speakers and a control module in the middle of a sleep headband are perfect for side sleeping. Sleeping headphones are comfortable to wear while sleeping. Choose Perytong sleeping headphones, fall asleep fast, stay asleep and have a sweet dream, they block out ambient noise without using earplugs that are painful and fall out. Their headphones have an advanced battery that can work more than 10 hours and only take 1-2 hours to charge. The sports headphones have a quality chip with fast paring speed, less power consuming, and a stable clear sound. The headband is made of braided cord and has a mesh lining that is extremely stretchable and fits most head sizes. Remove the control Pod first before you can use the headphones. Cool gifts for Thanksgiving Day, Christmas Stocking Stuffers, Secret Santa gifts, Birthday, Mother's Day, and many other occasions. Perytong has upgraded the headband for the sleeping headphones for a better and stable sound, made it elastic to fit most head sizes, and adopted a light fabric material which feels cool on the skin. If the sleeping headband phones you received are malfunctioning, please let them know so they can give you a free replacement. If you have a problem, please contact them.

Brand: Perytong

👤The title says it all. My partner snores to wake me up. He snorts, gurgles, gasps and snuffles while I lay awake imagining all the ways I could murder him because I cannot fall asleep due to his loud bellows. Enter the stage. The perfect headphones for sleep. When I tried to sleep on my side, my earbuds hurt like crazy. I was worried that in a fit of rage, I would wrap the wires around my partner's neck so I could not hear him. I found these headphones at 3 in the morning and thought, "Why not?" They. Are. Awesome. I can sleep with my headband on. The volume control is great. It doesn't completely drown out the loud noise from the partner but the stream of sleep music I listen to combined with the comfort of the headband allows me to fall asleep and stay asleep. I can't recommend them enough. They have kept me out of prison. A win-win.

👤I love these! I've been suffering from insomnia for over a year. My husband snores loudly. I have tried a lot of things, including regular ear buds. Nothing else was working, so finally broke down and bought these. I am so happy I did. I wore sleep headphones for the first time last night and fell asleep quickly. I put white noise on my music to drown out snoring. If you have trouble falling asleep, try these. They were easy to use and comfortable. The instructions were easy to read and quite detailed. There is a The photo was taken this morning and it shows a happy person.

👤I am going on a cruise in a few weeks and I love my husband but he snores. I spend a few nights a week on the couch because I can't get him to stop. It will be frowned upon to fall asleep naked on a couch. I realized I needed to find something. I don't like traditional ear plugs. I thought about buying these for 3 weeks. These will be bad, or they won't fit in my head. I realized that I was running out of time as I neared vacation. I decided to buy them. They arrived in a day. I put on a sleep meditation album from my phone after I got them home and was asleep. When I woke up in the middle of the night, I turned the music back on and fell asleep. I can fall asleep because it makes this more prominent. It was very comfortable. The bass is really good on these. If you're looking to drown out your partner due to snoring, this is a great, affordable, and quality product that you should buy.

👤It's easy to fall asleep to music with this product. I am usually a side sleeper. Since I like to listen to music to help me fall asleep, the other headphones that I have are too large to fit on my side, making it uncomfortable. I was excited when I received this headband, because it allowed me to lay on my side to fall asleep, and it kept my hair off my face and neck. I connected my phone to the internet. I was worried that I wouldn't be able to wear glasses with the band, but it is still comfortable. I would highly recommend this product.


What is the best product for headphone headband replacement?

Headphone headband replacement products from Geekria. In this article about headphone headband replacement you can see why people choose the product. Kapon and Scr are also good brands to look for when you are finding headphone headband replacement.

What are the best brands for headphone headband replacement?

Geekria, Kapon and Scr are some of the best brands that chosen by people for headphone headband replacement. Find the detail in this article. Sennheiser, Soulwit and Linkidea are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to