Best Headphone Holder Desk Cute

Desk 26 May 2022 10+ Comments Open

1. OATSBASF Height Adjustable Kawaii Compatible

OATSBASF Height Adjustable Kawaii Compatible

We are committed to giving customers the best products. If you have a question about the mount, please contact them and they will answer it in 24 hours. A weighted base and an aluminum alloy rod make a lower centre of gravity for this cute phone stand for desk. The cell phone stand is stable enough to support all phones. The bunny phone stand is compatible with all kinds of electronic devices, such as e-readers, tablets, and phones. Pro 12 Pro Max 11 Pro. Xs. Xs Max. Xr X 8 7 6 is an iPad mini. /S8 There are many, including, a Tab, a phone, a device, a computer, a device, a computer, a device, a computer, a device, a computer, a device, a computer, a device, a computer, a device, a computer, a device, a The rubber pads on the phone stand can protect your device from scratches. The phone stand is in accordance with ergonomics. The height can be easily adjusted between 7.1in-10.2in and the angle can be adjusted between 060 to help fix your posture and reduce neck and back strain. The bunny phone holder is designed in a lovely bunny image, and OATSBASF promises to provide the high quality products and the best services to you. If you have a question or inquiry about their products or service, please contact them directly, they will be able to provide a satisfactory solution in 24 hours.

Brand: Oatsbasf

👤I was looking for a phone stand that would allow me to adjust the height and viewing angle of my phone, and I found it. This adorable rabbit was an obvious outlier above the rest, and it was lifeless and cold metal. I don't like pink, but it gives my room some pop. I was pleasantly surprised that the stand can hold up my phone and Nintendo Switch, as well as my handheld gaming PC, even if you have to tilt it a ways back so it doesn't fall off the nubs on the bottom. I don't think anything bigger than that is stretching the limits of this stand. I don't think it can hold a full-sized iPad or other 8 inch+ tablets, and certainly not the upcoming Steam Deck. I can better enjoy watching media hands-free with it because it is very stable for things that it can comfortably hold. It's not suitable for a bed since it could topple over in that situation. The logo of OATSBASF is ugly on the base of this stand. The non-English of it is triggering in plain sight. I got rid of it with acetone and fine-grain sandpaper. It's not completely invisible, but it's much better now that the ugly logo is gone. I wish companies would stop printing their weird nonsensical company names in such areas, it's a major turn-off and it doesn't need to be there at all. I don't want anyone to buy a stand from OATSBASF, I would just tell them to get it off Amazon. It's really sad.

👤The phone stand is cute. It holds my phone well, you can charge it while it's on the stand, I am loving it. If your phone case is large and heavy, it won't be able to hold it long because it will tip over or fall from the stand, and the little tip thing to hold your phone isn't long enough or big enough. The phone stand is the same as the picture you can adjust the heights and tilt it however you please.

👤I love this so much! It's sturdy and cute.

👤She loved it as a gift for her birthday.

👤It's cute and functional. You can't really disassemble or assemble them. It is easy to assembly. I don't know how to remove the print on the brand name.

👤Hold my phone, it doesn't slip, the stand expands, and you can adjust it to your liking. Definitely recommend for home or office.

👤I use it for my switch and might add it. If you like kawaii stuff, you should buy it.

👤I love this phone stand. It's cute and useful.

👤Para usar con Nintendo Switch, comprende. El soporte se ve igual a la foto, no se ve mal hecho. No son de la calidad, no tenga mucho peso, no momento de tratar de usar la base. Aunque tiene una iPad de 10.1'', pero se iria hacia atras con la base. Imagino that I conforme pase el tiempo, pero aunque la mia no llego haciendo. No me arrepiento de haber hecho la compra.

2. Lamicall Headphone Stand Headset Holder

Lamicall Headphone Stand Headset Holder

It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking. The rotation is done at a certain degree. The stick headphone hanger can be applied to different positions. Can paste under a table, under a desktop, under a cabinet, and on smooth surfaces. Headphone cable organizers. The headphone hook with the headset cable organizers can be used to make your desktop more tidy. Quick install. The holder has strong double-sided tape. Please hang your headphones after 24 hours to make sure the suface is dry and oilless and to make sure the hanger is firmly stuck. The hook of the headphone holder stand is made of rubber. The leather of the headset head beam needs to be kept free of the hook. It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc.

Brand: Lamicall

👤I gave one as a gift. The mount comes with an extra sticky pad so you can move it to another location if you want. The material is sturdy and doesn't feel cheap. We've bumped into it a few times but it hasn't broken or anything, but the mount is most likely going to fail given the weight. The mount can be used in many different ways, and it is very versatile. I've seen other options that aren't gaming headphone stands that take desk space, and plan on buying one for myself.

👤The item cannot be placed on the underside of the desk. For a few days, the glue stays. Twice, I used up the two patches that came with the product. If the base is mounted on the top side of the desk, this item will work. This takes up space on the desk surface that I didn't want. The product did not work as pictured, even after following the mounting instructions exactly. The device will not hold the Apple AirPods Max. Don't buy.

👤I have a white desk and a light grey chair, and this is the perfect accessory for it. The design is simple and quality. If you clean the surface before applying the glue, it will cure in 24 hours and be very strong.

👤The rotation feels great, it feels like clicking every 90 degrees. It was easy to install the included glue under my desk. It's easy to set the headset on when I work because I rotate the clip out. When I'm not working, I put it back under the desk so no one accidentally bumps into it. I used to have to reach under the desk to get to it. The double-sided cord clip is great to have because it allows you to clip in a headphone cord as well. If you need a power cord. The clip is a little flimsy. When I plug the headset into the light pull, I have to pop the cord back into the cord holder, which is an extra step. I would like the cord to stay in the clip.

👤The glue is terrible. Will not hold instuction to let the glue set for 24 hours, it did not work after 2 days. Might as well drill through the base with screws. You're better off with the screw style. There was an update on 2/7/2022. I did what I suggested a couple of weeks ago and it worked. The company made contact with me after modification and offered to send me a replacement. I said no because I accomplished the above and didn't need another one. They still wanted to give me a refund and send a new design with a scew shaft. The design worked better and the original cost of the order was returned. I increased my rating from 1 to 3 stars because of their customer support. You don't hear about it a lot these days.

👤I bought two of them because I liked this. They were easy to install. I had to store my headphones on them and I had to make sure it was good. One of the holders fell about three months later. I stuck it back up after I wiped the dirt off the spot it was going on and it seems to be holding up. I will switch out the glue if it falls again. The different ways in which it is held makes it easy to remove it from the way.

3. Headphone KAFRI Earphone Charging Accessories

Headphone KAFRI Earphone Charging Accessories

Premium quality is made of aluminum metal. 60 days of money back is included in the Headset Holder Warranty. Double Headphones Hanger can hold two headphones at the same time, with a headband width within 2.1inch, such as a gaming headphone, children headphone, and so on. You can charge your smart device without a plug in wall with the 3 Port SmartUSB Charger. It can detect your device and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amps overall. The lights are RGB. The RBG Headphone Stand can display 9 colors changing effects to create an amazing game atmosphere at your preference, that can be selected by pressing a Touch switch. Great gifts for men and women. Fire-resistant and hardened plastic outer shell, build-in premium circuitry and microchip ensure device safety. A multi-protection system protects against overload, short-circuits, over-current and other charging issues. If there is a quality issue with this headphone rack, please do not purchase it.

Brand: Kafri

👤It's a nice idea, but it doesn't live up to the potential. Is a decent job holding on to the desk, not sure if it will take too much weight. The lip at the top is not more than 1/2 inch. There is a flaw in theusb C port It won't register as charging my phone, but it will charge my ear bud case. I didn't return it because of that. The swap for a better power supply didn't help. It doesn't provide enough power to the port. The charging cable on the A port does not generate enough juice to quickly charge my phone. Pressing and holding the button will shut off the light.

👤I am always on the phone. It's helpful to have a place to hang my headset in my desk. There is a I like that I can charge a few devices here. There is a I don't like the fact that there is a circle of light on the front. The light is in motion. If you have this in an area where you sleep, it could keep you awake. The light show could make you sleepy. I'm not sure if it works that way, but I'm trying to see the bright side. I made a new year's resolution to be more positive.

👤There are no options for one color or different modes in the RGB lights. I don't like them but the rest of the things are very well made and I have to give it 5 stars. The hub is nice. I mounted it under my desk because it was strong enough to handle. It's under my desk to hide the mess of wires.

👤If it fell down immediately or within 20 minutes of installation, it wouldn't be possible to hold onto the table and plug in to the wall at the same time. If your space is set up just right, you're good, but other than that, good luck! I felt like the item was false in the description.

👤The convenience factor is great. The attachment screw is set up to be too close to the brackets, which is a manufacturing defect. Result: The cheap plastic cap on the end of the screw makes the device slip off with the smallest of movements, like hanging a set of headphones.

👤I own a few pairs of headphones. A mic and tooth for my phone. I think they fit on my desk. The unit is held sturdy by the clamps. It is handy to have both the 2 and 1 charging ports. The light is funky. It would be nice to have the option of turning it off, but I can set it to whatever color I want or let it spin through the various colors. I am very happy with the purchase. It gets my headphones off my desk. I highly recommend it.

👤It's a great addition to my set up and helps me keep my headphones organized. I love that the lights can be turned off and that the extra outlets are clutch. I have been using it for almost a month and it has never moved. The plastic feels cheap but I can't complain about the price.

4. GeekDigg Acrylic Headset Headphone Organizer Transparent

GeekDigg Acrylic Headset Headphone Organizer Transparent

We try to provide customers with the best experiences at the best prices, and yet customer satisfaction is still their top priority. They have a new version that can hold heavier headphones and is more stable than the previous version. Unique design. Their designer designed the cable organizers behind the arm of the stand to keep the long cables tidy. The headset stand is portable and easy to install. You can bring it with you wherever you go, and it will save your space. The perfect size to hold your headphones is 10 inches. You don't need to worry about the quality of their headset stands because they are made from acrylic material. They are responsible with their headphones. If there is a problem with it, please let them know. Good after-sale service will be provided by them.

Brand: Geekdigg

👤It's super cute. My desk set up matches. I found this stand reasonably priced, with no damage, and fast arrival. It is the same height as my boyfriends and I wish it was a little taller. Taking care of your headphones/storing them properly will save you in the long run.

👤The thickness of the upright isn't enough for a long- lasting item. Even with a moderate headset, I can see that it is not going to improve over time. I arrived with a damaged upright, and it appears that it happened in the factory packaging. I was hoping for a clear look. There is a I might make a stronger one later, myself, but for now this will suffice. I don't think it will last more than six months.

👤The overall feel was pleasant. The total assembled weight of the product is 7.3 ounces, with the base having a decent weight to it to keep it stable. Half a pound. The flex in the hangar portion is good for absorption of weight. I don't know how that's possible, without being incredibly rough with it, because their stand broke after a day. If you have expectations for a plastic stand, this is great. If you're more of a reckless personality, I would recommend a metal stand. -The The design is very simple and neutral. It also comes with a small brush to keep the stand clean. This is perfect for the quality to price point ratio. There is a The transparent version has a "Geekdigg" logo on the bottom that is a little too prevalent. I didn't catch this in the stock photos provided, but I think a 'frosted' logo would look less glaring and still provide Geekdigg with their product. That feels nit-picky. There is a I highly recommend. * $10-15 is an appropriate range for Amazon prices.

👤I ordered a headset stand for my son since he flings it everywhere. I was surprised that they thought of everything. There are anti-slide dots on the bottom. I thought I'd be able to move them or pick them out, which is very cheap. They didn't budge. The cord is wrapped in the back very neatly. I was surprised to see a brush with the order. It was a nice touch. The screwdriver was sent to put the stand and holder together. I didn't have to look for ours. I love it, my kid loves it.

👤I use different headsets for different uses and this one can hold multiple units. The hooks in the back were originally designed for the cable. The transparent design makes it look less intimidating. The logo is the only thing I don't like. I would have preferred it to be white. The reason they painted it was to hide the screw. I would give 98 out of 100.

👤This is better looking than the real thing. They went together in less than 3 seconds. There were two extra screws, a neat looking little screwdriver, and a dusting brush. I don't know if the dusting brush was included, but it was a bonus. It looks cool, doesn't fall over, and there's plenty of room for your headphones on the back. I would buy again.

5. Headphone Extension Charging Extender Accessories

Headphone Extension Charging Extender Accessories

The curve shape makes the stand more stable. Designed to protect your headphones. A multi-functional headset stand with a blue light and multi-color light pole to organize the cord. A great gift for a family member. A multi-color light pole and blue light base are used for the COZOO Headphone Stand. You can change the light modes by touching the button. There are two USB 2.0 ports that can transfer files or charge with speeds up to 480 Mbps, support popular OS like Windows, Linux, Mac with plug and play function, no drivers required. Fire-resistant and hardened plastic outer shell for durability, no risk of wood flammable and metal leaking, build-in premium circuitry and microchip ensure device safety. A multi-protection system protects against overload, short-circuits, over-current and other charging issues. The CoZOO Headphone Port has a 30-Day money back guarantee. If there is a quality issue with this headphone rack, please contact them.

Brand: Cozoo

👤My son and I like it. It is not heavy. It is very light and holds his headphones in perfect condition. We don't have any animals to worry about. It was easy to put together. This was perfect to hold his headphones because he was into the color changing lights theme. I can charge both his and my cellphone at the same time, but he can't charge his iPad at the same time. I was able to use the wall outlet more because I was able to connect this to theusb outlet on his desk lamp. I will buy again if necessary.

👤I was excited for this product. It wasn't great. The product is black and sticks out like a sore thumb because it has a long white cord. The black cord was needed to use it. It plugs into the computer's hard drive. When I try to charge my wireless mouse, it won't work because my computer isn't open. My mouse won't charge if my laptop goes dark. It does not hold my headphones well. It only shows a few colors that are on rotation. There is no way to modify the color features. I wish I would have returned the product. I am not a huge fan. Look for something better if you skip this.

👤The noise cancelation is low because this is a stand for headphones. It works well as a stand and the light adds to the gaming experience. If you remember to plug in your headset in the middle of the game, you won't have to find a charging cord in the middle of the game, which can mean the difference between a victory and a loss. There is no controller to change the colors. You have to do it manually.

👤I bought 2 of these because I work from home and am a gaming enthusiast. I have multiple phones with headsets for my job and I was tired of just throwing them on my desk. The color changeable lights add a nice atmosphere and keep my headsets out of my desk.

👤You can have a rotation of the rgb color. The stand is sturdy. Highly recommended.

👤It looks very cool. The change color button is very sensitive. It changes color by itself. It was very annoying. You get what you pay for.

👤It is also a charging stand. There is a Type C port. It looks great at night. Plug and play! Simple but nice. I like it.

👤It fits in with the living room. It is possible to change color manually or auto. Sturdy enough for the bulky headphones, and charges our 2 kindles without problems.

👤I recommend it to everyone on YouTube, it was a top five fan of one of my videos, and the guys got to set it up. Take care of it, it looks nice.

👤I really like this stand. It adds a nice decor to my desk and holds my headset perfectly. Theusbs are great for charging anything.

👤The type C power cable is loose. I switched to a shorter one. Looks great!

6. SIMGAL Headphones Universal Headset Included

SIMGAL Headphones Universal Headset Included

Plug 'n Play on Mac and PC will instantly start recording and streaming. The headset holder is made of good quality plastic and is pink. The pink headset holder is easy to assemble and disassemble. The pink headset holder is made of good quality plastic with reasonable sizes and weight. There are four mats at the bottom of the base that prevent the holder from slipping. The base is 14 cm long, 7.5 cm wide and 5mm high. The frame is 25 cm high and 5 cm thick. The pink stand supports all over- ear headphones. You can find a safe place for your headphones.

Brand: Simgal

👤The assembly is easy, but it's a "pop-in" assembly and it's spilling my headphones. I would choose another.

👤A pretty baby pink. The Kraken Kitty Headset is a match. Even if you push them together as far as you can, it will still be a little wobbly. I haven't dropped my headset yet. There's a little movement on a desk. I have bumped into it a few times and it hasn't fallen over. So far, it's been great!

👤Absolutely love it! The cute colour is a bonus. It can be easy to put together, but it can be a bit flimsy, and come apart easily, and this can be avoided by jamming the two parts together. It matches my setup perfectly.

👤It does what it says it will do, but the top part doesn't clip into the base so if you try to pick it up it loses its base. I had to glue it down.

👤It's easy to put together and use my pink headset.

👤I gave this to my daughter because she was trying to put one piece into the other. She got hurt. She loved it!

👤I really like it, I got it for my headset. It does its job of holding my headset. The color is a bit darker than I expected. I like it.

7. FINPAC Headphone Compatible Sennheiser Headphones

FINPAC Headphone Compatible Sennheiser Headphones

Double wall insulation is a great design that works great in any decor and is ideal for home, apartments, dorms, offices, and campers. Give your loved ones a gift that will allow them to enjoy their favorite drinks on the couch. This desktop stand is compatible with all of the above headphones. The sleek and elegant appearance of the FINPAC headphone stand was inspired by the sea and has been designed and tested to comfortably hold your wireless headphones, noise cancelling headphones, gaming headphones, telephone headset, children headphones, etc. The part of the headphone holder is made from premium materials with smooth curved edges to hold your headphones securely and to prevent your head beam from scratches or damages. The base for the headset is heavy-duty and uses a hybrid of plastic and metal to help add weight and an anti-slip base to keep the stand stable. The earphone stand is 10.24 inches tall and 3.8 inches wide. The desktop holder is great for most wired and wireless headsets.

Brand: Finpac

👤The Earphone holder is beautiful. It works well. It helps my Astro Head phones.

👤Simple and practical.

👤I use headphones for zoom calls when I work from home. It's a good idea to have a nice place to put your phones. There is a The stand is stable with its bottom weight. The design of the top support is similar to a manta ray. The headset rests on the floor. The bottom part of the rod was not screwed correctly. I had to use pliers to get the threads in. It is very easy to put together, and it looks nice on my desk.

👤The stand is rock solid and I have been using it daily for the last two weeks. I like the curved support so it doesn't crease in the head pad of my Bose QC 35 headphones. The rest of the stand is light weight and nicely weighted. It took 30 seconds to screw the three parts together after they were disassembled.

8. TotalMount Monitor Mount for Headphones

TotalMount Monitor Mount for Headphones

You can protect your headphones by placing them on the left side of your computer monitor. This product is ideal for people who want to save desk space and protect their headphones. This stand has a soft-Silicone holder to protect your headphones, unlike other stands that have sharp edges. All over-the- ear headphones, on-ear headphones, and gaming headsets are compatible. TOTAL MOUNT is the leader in electronics mounting. Over 70 patents, 50,000 five-star reviews, and a long history of quality make TOTAL MOUNT a leader in its field.

Brand: Totalmount

👤If you have a curved monitor like I do, then you're better off selecting a different mount. I put the mount on the side of the shelf. It works. I wish I had picked a different item.

👤I had to remove the holder from the monitor. I had to get a knife and spend some time trying to separate the holder from the monitor without damaging either one, so I took off one star. The holder got out a bit bent and had some damaged stickers on it. I had to fit the hardware from the office in the smaller desk because I had to work from home. The headphones take too much space on the desk between them and they are great during the calls. I picked this hook only today, but it was easy to assemble, does not look flimsy, and holds headphones out of the desk. Will see how it holds after a while, but it is perfect at the moment.

👤I was going to submit photos, but the add photo button was missing. I will try to add them later. There is a This worked well for me. I use a TV screen for my monitor, with my work laptop off to the side. The cord always got in the way when I put my headphones in the drawer. My desk was too wide to have a hook on it. The "hook" on the TV was the perfect solution. The TV had no problem sticking. The mount overhangs with nothing because of how my TV was made, which means there is about a half inch of space between the raised back of the TV and the edge of the screen. It holds up my headphones just fine, so far it doesn't seem to have caused any issues. I don't worry about it falling off because the headphones are light and designed to be. This can be adjusted to work on either side of your monitor. There is a Thanks for making my desk free of stuff.

👤The main mount needs to be longer. The attachment pole part is short. If the back of the TV doesn't come to the edge, there won't be enough room for your headset to fit. There is a A dual pack, one with short attaching part and a longer one for a few dollars extra, is something this company could offer.

👤This is a great mount. It worked well for its purpose. The way the brackets are designed will conform to many shapes, and the way the strips are held tight to the back of my monitor made it very tight. The problem comes when you have to move it. Command Strips are not the same as the adhesive strips. If you pull too hard you will tear the strip. It takes quite a bit of effort to remove the brackets, and the strips can be thrown away, because you won't be able to reuse them. The vendor doesn't seem to have a way to get new ones, so I have a $12 dust collector.

9. Foldable Headphone Aluminum Universal Headphones

Foldable Headphone Aluminum Universal Headphones

If you have any questions or concerns, please contact them. They will be patient to solve your problem. The Universal Under Desk Hanger can be used on desks up to 45mm thick and as small as 5mm. It can be lain flat on the wall when it is not in use, folding or expanding at your convenience. It is easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or table from damage. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers, shelfs etc. It's great for hanging game controllers, cables and other gadgets. 60 days of money back is included in the Headset Holder Warranty.

Brand: Apphome

👤My TV stand doesn't have room for the soundbar so I used two racks to hold it. The sound bar is 5 lbs heavy and supported by two racks. I'm happy it worked out.

👤I'm glad I chose this one because there are so many different models to choose from. It has a heavy, solid feel to it, and it has a nice padding on the arm so it won't damage the furniture. It folds up when not in use. Great product! I am an actual consumer, not a fake reviewer.

👤They are very well constructed. I attached them to the end of the stand that holds my TV. I put my sound bar on them. The sound bar is small enough to fit on them, so they can hold it in front of the TV. The sound bar could not be held on the TV stand because there was not enough room.

👤This thing is perfect. My boyfriend's desk has a small lip on the sides that hangs over the sides, but it is a vintage metal desk. Since these holders are mostly designed for desks with empty space below, I had to search through a million to find one that didn't require so much depth for the tension screw. It works great after finding this one. It's easy to install, but will still hold a large clunky headset. The photos have accurate measurements.

👤There are three people working from home, one of them is a gaming son. I'm running out of places to put my headsets, my son has a gaming headset, and I've got my headset for Teams. This particular hook is unique for a couple of reasons. I like the metal construction. It blends in with any black furniture or decor. If it happens to be in a high pass area of your desk or table, the folding design will allow you to get it out of the way. The ability to adjust the orientation from a vertical to horizontal one was a feature that made this a definite purchase. My desk is made of wood and metal and has a lip on it. The standard vertical style brace clap design is useless because it is short of the height of the table. I can't use boom stands with this table because of the other accessories I have. The only thing I had to do was remove the two allen screws and attach them to the leg of the table. It is now a permanent fixture. A huge problem was solved when I reached for my headset. I bought two of them for work and one for home. A great buy.

👤I always remain objective and honest when reviewing products. I always review with information that I feel others would like to know about the product, as I always assume what I'm writing will affect the purchase. I try to go beyond surface characteristics and input into quality, value and application. I will always end the review with an answer as to whether or not I would purchase the item again, which I believe is the most critical question pertaining to the item. Let me know if you want me to review your items. I was looking for a cheap hanging solution for my headphones and this product was the only one I could say anything about. I usually have my headphones on, but it can flip up when not in use. The screw base makes it easy to use for different sizes of desks. I'll probably buy another one for my daughter. It's a very handy device, serves the purpose well, and is cheap, but sturdy. You won't be disappointed.

10. ONEGenug Headphone Sennheiser Audio Technica Beyerdynamic Headphones

ONEGenug Headphone Sennheiser Audio Technica Beyerdynamic Headphones

The curve shape makes the stand more stable. Designed to protect your headphones. The Arch bridge shape allows you to put the headphones, game controller, cell phones, and mp3 player on the middle of the headset stand, so your computer desktop won't look messy. The material is made of walnuts and is smooth, comfortable, and eco-friendly. Function: The stand is designed to keep your headphones out of the way of dust and scratches. The stand is sturdy and has rubber feet on the base to keep it from sliding. There is a 2 year satisfaction guarantee forValuable gift for Christmas, Thanksgiving day, Easter, Birthday, Valentine's day and more.

Brand: Onegenug

👤The piece is strong. The arch is cut with a band saw and is unattractive. If you remove the base, you can use fine sandpaper to make the edge softer, but the veneer is so thin you can't see the wood in the next layer. I did not attempt to glue the base to the arch, but returned. The saw blade marks are visible on the laminated edge. The surface is smooth. I could have refinished myself. I would have liked to have kept this, except for the crude joint between the arch and base.

👤There are no complaints about this stand. The stand is elegant and has nice layers of wood and veneer. Lower your expectations on fit and finish. Some quality problems are revealed by looking closer. There is a The upper arch to support the headphones and the lower arch that stands on the desk are both screwed together from the bottom of the lower arch. The screw holes are messy. They are out of sight so there is no big deal. It surprised me. The two arch pieces meet in this location. There is a noticeable gap on each side of the joint. It is roughly cut and finished. If I had to guess, a band saw would cut these without much sanding or attempts to make the joints appear curved. The intent is to have the stand appear as a single piece of wood but these gaps and rough cuts kill the design up close.

👤The stand is sturdy. The padding on my Bose headphones became stuck to the stand. I have to throw the stand away and replace the padding on the headphones.

👤It works perfectly with my Sony MDR-Z7 phones. It looks more expensive than it is. I don't like manufacturing defects and I won't see any on this. A reviewer said that if you turn it upside down, the pilot holes for the screws that hold it together are missing. Don't turn it upside down, it's impossible to make soft plywood with a sharp angle, and you can't get any chips, so get over it. Enjoy!

👤This is a great stand for my headphones. It is an absolute beauty and looks great in any setup that I have it in. I was worried about it tipping over, but I no longer worry about that, and it helps shape my headband. I mean by that because my previous stand had a bar at the top that was stretching out my headband, but now the stand is curved, which makes it easier to fit my headband in. There is a In the humid environment of Hawaii, my headphones are going to end up sticking to the stand because of the shiny coating on them. I hope the ear pads on my headphones are not expensive. Time will tell. I would like to see a different version that was more of a matt finish. It would look better, and it would also eliminate the worry of my ear pads sticking to the coating. They're worth the money. There are a few manufacturing issues with these items, but it's not unusual.

11. Gaming Monitor Computer Headphone Workstation

Gaming Monitor Computer Headphone Workstation

There is a headset hanger and a screw for the alternative. You can request a free replacement within a year and a full refund within 60 days if it's due to non-human reasons. Feel free to contact them with any questions or suggestions through Amazon Messages. The large gaming surface, designed with 55"W x 23.6"D massive space, can meet all your placement needs of gaming gear like keyboard, game console, handle, mouse pad, etc. Do you need two monitors to focus on the competition? No problem! More equipment support is provided by the monitor stand and cup holder at the gaming desk. They care for your eyesight. Let's enjoy the gaming experience. The R-shaped steel frame provides better stability and ensures a load-bearing capacity of 330 lbs. Even on carpets or floors, the MOTPK gaming desk is more sturdy because of its metal bars. Real Carbon Fiber. The gaming desk on Amazon is painted with real carbon fiber. The texture is full of post-modern technological sense, but also protects the surface from damage, waterproof and heatproof. 100% SATISFACTION: Their service team is always available to help and will respond within 24 hours. Don't hesitate, take the gaming desk home right now.

Brand: Motpk

👤The desk is the perfect size and arrived quickly. The box was packed well and had plastic protectors on it to protect the desk. It took about 20 minutes to put together, I recommend having someone help you. The top of the desk is very smooth, the frame is sturdy, and it is easy to move around. I love this desk!

👤The desk is pretty good. I haven't had any issues with parts wobbling or weird marks. The instructions were very easy to follow and took me about two hours to build. I didn't need a cup holder because the cupholder wasn't assembling correctly.

👤My setup is going to be all white eventually, so I wanted a desk that was white. If I had it my way, this desk would be wider so I could have more space between me and the monitor, but the riser makes up for that. Side note at the bottom. It comes in white. It is very difficult to find a gaming desk in the color white in my white PC setup. If you don't have a mouse, you are going to feel the texture under your mouse, which is cool, but also weird. I love that the desk has a riser for the monitor to sit on, so I don't have to look down or be right up on the monitor. If I want to pull out my controller for the xbox, I can put my keyboard underneath the riser. It comes with a cup holder and headset holder, but I was unable to use them because I had to put the desk in the corner. It doesn't have to be expensive to have a desk in your setup. This one is a decent price compared to others. If you're just starting your set up, this is a great desk because you can either spray paint it or cover it with a vinyl cover. If you are the project type, it's like a clean slate. You can do the white like me for that fresh look. If you have an old house like mine with bad floors, these will come in handy. The desk is nice, but it is only 23” wide so there isn't a lot of space between you and your monitor screen. There is a side note. I just got my first PC and unfortunately I didn't know the PC had protectors on the feet, which caused it to yellow and stained the desk, so now there are ugly yellow stains where the PC sits. I didn't get a chance to take a photo of them, but I have tried everything to get them out, but they are permanent. I think the protectors fault was that the carbon fiber texture made the stains more noticeable, but I wanted to make sure you were aware that if you spill something with a lot of dye, it will most likely stain this desk. I am most likely going to wrap the desk in vinyl so they will not see it, it is a sad situation.

Summary

What is the best product for headphone holder desk cute?

Headphone holder desk cute products from Oatsbasf. In this article about headphone holder desk cute you can see why people choose the product. Lamicall and Kafri are also good brands to look for when you are finding headphone holder desk cute.

What are the best brands for headphone holder desk cute?

Oatsbasf, Lamicall and Kafri are some of the best brands that chosen by people for headphone holder desk cute. Find the detail in this article. Geekdigg, Cozoo and Simgal are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com