Premium quality is made of aluminum metal. 60 days of money back is included in the Headset Holder Warranty. Double Headphones Hanger can hold two headphones at the same time, with a headband width within 2.1inch, such as a gaming headphone, children headphone, and so on. You can charge your smart device without a plug in wall with the 3 Port SmartUSB Charger. It can detect your device and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amps overall. The lights are RGB. The RBG Headphone Stand can display 9 colors changing effects to create an amazing game atmosphere at your preference, that can be selected by pressing a Touch switch. Great gifts for men and women. Fire-resistant and hardened plastic outer shell, build-in premium circuitry and microchip ensure device safety. A multi-protection system protects against overload, short-circuits, over-current and other charging issues. If there is a quality issue with this headphone rack, please do not purchase it.
👤It's a nice idea, but it doesn't live up to the potential. Is a decent job holding on to the desk, not sure if it will take too much weight. The lip at the top is not more than 1/2 inch. There is a flaw in theusb C port It won't register as charging my phone, but it will charge my ear bud case. I didn't return it because of that. The swap for a better power supply didn't help. It doesn't provide enough power to the port. The charging cable on the A port does not generate enough juice to quickly charge my phone. Pressing and holding the button will shut off the light.
👤I am always on the phone. It's helpful to have a place to hang my headset in my desk. There is a I like that I can charge a few devices here. There is a I don't like the fact that there is a circle of light on the front. The light is in motion. If you have this in an area where you sleep, it could keep you awake. The light show could make you sleepy. I'm not sure if it works that way, but I'm trying to see the bright side. I made a new year's resolution to be more positive.
👤There are no options for one color or different modes in the RGB lights. I don't like them but the rest of the things are very well made and I have to give it 5 stars. The hub is nice. I mounted it under my desk because it was strong enough to handle. It's under my desk to hide the mess of wires.
👤If it fell down immediately or within 20 minutes of installation, it wouldn't be possible to hold onto the table and plug in to the wall at the same time. If your space is set up just right, you're good, but other than that, good luck! I felt like the item was false in the description.
👤The convenience factor is great. The attachment screw is set up to be too close to the brackets, which is a manufacturing defect. Result: The cheap plastic cap on the end of the screw makes the device slip off with the smallest of movements, like hanging a set of headphones.
👤I own a few pairs of headphones. A mic and tooth for my phone. I think they fit on my desk. The unit is held sturdy by the clamps. It is handy to have both the 2 and 1 charging ports. The light is funky. It would be nice to have the option of turning it off, but I can set it to whatever color I want or let it spin through the various colors. I am very happy with the purchase. It gets my headphones off my desk. I highly recommend it.
👤It's a great addition to my set up and helps me keep my headphones organized. I love that the lights can be turned off and that the extra outlets are clutch. I have been using it for almost a month and it has never moved. The plastic feels cheap but I can't complain about the price.
After sales service. If you don't like the necklace, you can exchange it for a new one or get full money back. If you have a question, please contact them. The lights are RGB. There are 9 lighting effects modes, up to 16 million colors, and theRBG Headphone Stand can show an amazing gaming atmosphere. Simply pressing a Touch switch will select that. Great gifts for a man and a woman. Place your phone on a fast charging pad and you'll be good to go. No cables or interface required. It's compatible with the Apple iPhone X, Apple iPhone XS Max, Apple iPhone 8/7 Plus, and the SAMSUNG GALAXY S9/S9 Credit cards and metal will interfere with charging. Charge models can be identified. Fast wireless charge up to 10W compatible with the S10, S10 Plus, S10E, S9, S9 Plus, S8, S8 The Note 9, S7, S7 edge, S6 edge+, and 7.5W wireless charging for the phone are included. 5W standard wireless charge for all Qi-enabled phones is included. Fire-resistant and hardened plastic outer shell, build-in premium circuitry and microchip ensure device safety. A multi-protection system protects against overload, short-circuits, over-current and other charging issues. If there is a quality issue with this headphone rack or you are not happy with your purchase, please do not hesitate to contact them.
👤The headset stand is terrible and not even worth 10$, the charging port is low quality, and the lights change when you try to charge your phone. This is not worth 30 dollars. I don't like leaving reviews but I don't want you to waste your time or money.
👤Absolutely recommend this headset stand. The stand was easy to set up. The stand is very solid and feels very premium. I don't think I'll ever use wireless charging. The main reason I got this stand was for the lighting. The lighting looks great. It's the perfect amount of light. You can have all the colors or a specific color. I have two headsets that are the same, but work on different consoles. This saves me from having to figure out which headset is right for me. Stand can be plugged into a brick or surge protector with ausb ports. This stand was perfect for my needs. I adjusted the settings on my camera to make the lights look brighter because I wanted my camera to look crazy. I highly recommend it.
👤Where do I start? I like to spend more money on things with higher quality or brands that are well known. After watching a review of this product on the internet, I decided to buy it. The base acts as a wireless charging point. I was looking into a wireleless charger for my desk as well, and after reading lots of reviews on diff products saying can't charge with case, I got worried this RGB stand would have the same issue as I have an otterbox case on my Iphone 11 Pro, so It charged me with my case on. I've seen people spend a lot of money on a wireless charge and can't charge it with their case. The stand is sturdy and holds my headphones very well. This product is a great value. No need to spend more money on a brand. The lighting is not too bright or dim. It's plug n play. Since it doesn't need to send data to the PC, you don't need to worry about having enoughusbs, it can be plugged into a wall outlet. I recommend this product to anyone who is interested in a headphone stand.
👤I bought this unit just over a month ago and it works well for me, easy to assemble and sturdy enough to hold an Artemis Spectrum gaming headset. I can easily charge my Note 10 with the headset stored just by shortening it a bit, because a few people in the comments are talking about not being able to charge their phones with the headset in place. The phone has to be in the right spot to charge, which is a bit of a hassle, and the headset stand has to be placed in the right spot. If you buy a stand that doesn't seem to charge your phone, shift it around a bit to make sure it's lined up right to charge, it will charge even if you don't use it much.
Two preset heights give you maximum control over the level of your computer screen to improve posture and prevent neck and back pain. There is a notice. It is not possible to use it for painting a wall. If you paste to the wall, it will fall down. Make sure the surface is smooth, dry and oilless, and hang your headphones after 24 hours to make sure the hanger is firmly stuck. 500g is the max total weight. The headset holder with a magnet can be used when it is not in use. The arm of your headphones is covered with a soft rubber pad to protect it from slipping and scratching. The headphone hook has a strong sticky design, which can be applied to any smooth and clean surface. Hold your earphone in a firm position. Remove the sticker and stick it under your desk. It's great for hanging cables, hats and other gadgets to the kitchen counter, bookshelf, studio and company. A multi-purpose hook. The under desk mount is compatible with almost all wired and wireless headphones.
👤Does what it says it does. No issues.
👤I like the design. It's easy to hide and doesn't get in the way. It flips closed when you don't use it for headphones. It was easy to install, just remove the paper from the device and stick it on the spot you want it. The second adhesive pad they sent will help if The adhesive ever wears out. Overall, a great purchase, it does what I wanted it to do.
The dual Headphones Hanger under the desk can hold two headphones at the same time, with a headband width within 2.1inch. You can charge your smart device without a plug in wall with the 5 port smartusbcharging unit. It can detect your device and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amps overall. You need to use different ways to hold your under desk, so come with 2 screws and 3M VHB tape. Please clean and dry the surface of the desk and stand before you install it. Wait 24 hours before using. 6 cable management hooks for keeping cables neat and organized are included in the cable organizers. Saving space for your phone and headsets is helped by it. Can hold two sets of headphones. The arms are not the same. Their promise is to make sure you are 100% satisfied with your purchase of their products. They will give you lifetime warranty service if you have any questions. You are both a customer and a friend.
👤This is very nicely placed under my desk. I don't use screws because the tape looks strong. It supports my headphones. There is a The side wings have a notch on them. It saves space and I don't have to have a headphone holder. There isn't a way to turn off the blue lights. Overall 5 stars.
👤I have a tv stand above my couch that makes it hard to charge my phones and controllers. The kit does a great job of charging my equipment. I used screws instead of tape and it was easy to install.
👤An amazing find. I used 3m double sided tape. It does come with some tools to set it up, but mine didn't damage it. I like it. If you're looking for a way to charge your items without having to use an outlet, then buy it. I wire managed it, but it is not a brick charging point. A long cord is attached to the item.
👤I bought this stand to keep my headset out of sight. I used the screws that came with it to attach it to my desk, so I can't comment on the strength of the 3M tape. It's made of plastic and doesn't feel weak, but I'm afraid to hang up my headsets. It comes with a screwdriver, brackets to help guide the power wire in place under the desk, and double sided tape for the brackets. The built in ports are nice, but it would have been nicer to have a few more ports.
👤I like this thing. It keeps my things out of my way all the time. Everyone always needs moreusbs at your desk. The screw brackets and sticky tape are pretty good. I used double sided tape because I was skeptical if it would stick in the middle of the night. It seems very sturdy for the price. Would recommend. Everyone with a computer needs one of these.
👤I used to have a small extension cord with 3usb drives that I used to charge my phone, headphones, watch, and other things from, but I was short of the 3.0 rapid charge. The device solved my issues and gave me a place to hang my headset. The wings are barely big enough to fit the headset, and they seem a little flimsy.
👤The unit is described on Amazon. I was surprised that the box was not sealed when I received it, as I thought it had to be. Some of the 3M tape was bent up, but still applied. Time will be the most important. I plan to take my devices out of use after being charged. Rather be safe. There is a My desk is cleaner because I have a place to put my noise canceling and headsets. God bless!
👤The "wings" that hold a headset aren't long enough to hang anything from, and it doesn't attach well to my power strip. Does not help with cable management. Disappointed in the work.
You will get a headphone holder. 60-day money back is promised. They are confident in their products. Please contact them if you have any questions. The foldable headphone is called a Hanger. It can be lain flat on the wall when it is not in use, folding, or expanding. The built-in cable loop is designed to prevent your headset's cable from dragging on the ground or getting caught between your desk chair's legs. Universal Headphone Stand Under Desk is a universal stand that can fit on most desks. It is easy to remove and re-attach the screw clamp. Soft rubber pads located on both ends of your desk or table protect it from damage. Premium quality is made of aluminum metal. 60 days of money back is included in the Headset Holder Warranty.
👤I purchased the upgrade version without the cable organizers and the new upgrade with the cable organizers. Both versions had the same features, including the solid aluminum screw knob and the notch on the screw clamp pad for attaching to round desk legs. They arrived at the same time, and the upgrade version matched the catalog picture. The Newest upgrade did not. There are significant differences between the pictures of what arrived and the picture of the Amazon catalog. There is no notch for mounting to round desk legs, and the screw clamp pad is not completely flat. The cable organizers are on the opposite side of the hanging arm. The quality of the product was lowered from theUpgrade version in the changes #1 and #2. I will return to Amazon for a full refund. There is still a 1-star review. The seller reached out to me shortly after my initial product review to let me know the product I received was the older version which was replaced in August with the newer version. If I were to order it again from Amazon, they would give me a coupon that would let me get one for free. I took them up on their offer, but I was surprised to see that the older version of the product that had been re-released by Amazon was still there. The seller doesn't control what version of the product remains in Amazon inventory, but this is now November. You would think they would have exhausted their older version of the product by now. I purchased the exact same version of this product from another seller and they were able to deliver the newer upgrade version. 1-STAR to Amazon for pushing old inventory and 1-STAR to the seller for updating their product description, but then continuing to sell the old version through Amazon under a new product listing which does not match reality. I wonder how many other people who thought they were buying the newer version of the Prime Day product got shipped the older version. I was ready to write-off Apphome Direct forever after my second disappointing delivery of the older version of the product. Apphome Customer Service is persistent in ensuring that their customers are completely satisfied with the purchase experience as well as the products they sell. They apologized for the incorrect product being shipped and asked what they could do to make it right, after they had already fixed the issue. The only way for that to happen is for Apphonme Direct to send me the correct version of the product at no cost, and they will refund the price of the product if I purchase it a third time. "Third times the charm" is what they say, and it was in this instance! The newer version of the product was shown on the product page after I received the product. It's a good sign! I have dealt with a number of sellers on Amazon over product issues, but Apphome Direct Customer Service went above and beyond to make sure I was completely satisfied after my previous two bad purchase experiences. Apphome Direct is deserving of praise. I am happy to make more purchases from them again after having a positive experience with them.
The new bee stand is compatible with all sizes of headphones. The aluminum headset stand and rubber foundation are sturdy. The desk should be dust free and flat when you place the headset holder on it. This wireless headset stand is great for home, office, studio, bedroom or next to your TV. The gaming headset holder is small, light, and most important, it's a unique fashion style. Don't order it. If you have a problem or suggestion, please contact them, they will be more than happy to help.
👤The packaging was simple, sweet and complimentary. There is a It was easy to put together and works as advertised. I recommend this product if you want to display your headsets in a neat, compact way for the customer. I got two photos. This review was written again because of Amazon.
👤It's small and lightweight, but it's also very inexpensive, so for how little I paid for it, it does it's job well. There is a If you have large headphones or a cat that walks across your desk, there is a chance that your phone will tip over. There is a There is an edit. The foam on the band of my husband's headphones don't go away because of the stand pressing into it, and it has been used for about 6 months. It doesn't change the comfort of the headphones, but it makes them look worse. If you have nice headphones that you want to keep pristine, I recommend spending a little more for a curved stand because I use one for my headphones and do not have any indents. There is a If you don't care, this is a great stand that is very easy to use.
👤I bought a lot of these for storing and displaying headphones. I was pleasantly surprised by how well made these are. The wide and flexible piece on top of the headphone rests is made of TPU, which means that nothing will get scratched, and the top part of the rests is made of rubber. Some headphones have cheap foam pads up top so resting them on a thin pole or peg will usually damage them. It's not an issue with this stand. It's one of the cheapest ones. The base, post, and top are made of plastic with rubber pads. I know how good these are, so I can't imagine spending more.
👤I bought this to keep the headphones on my desk from getting thrown around. This device is very strong. There is a The unit is light and stable, even though it wouldn't stand up with headphones on. The base and stand feel like plastic and metal, respectively. The rubber top gives the headphones a good grip. There is a I am very pleased with this item. I have purchased 2 more of these.
👤There is no quality in construction. I got an $8 dollar stand after paying $8. There is a The stand can't support heavy headphones or have enough clearance for cable without causing stress to headphones. You should buy a stand that is worthy of your headphones. Is that true? The construction is cheap. The unit is assembled. The plastic that contacts the headphones bends easily. The plastic piece that is supposed to cradle the band is only three quarters of an inch in width. The stand has no width and makes an indent on the headphones. It will lead to pain. There is a The stand is too small for my headphones. I don't want my headphones to be hammed by the pressure on the cord and port. There is a Buying something else and returning.
Customer service is great. Give it a try. You can return it within a month if you don't like it. They will send you a new one if it is faulty within a year. Universal under design allows for a near universal fit on most desks by attaching a thin, narrow, and thick piece of metal to them. It is easy to remove the Spring Clamp. The audible headphone arm swings underneath your desk for discreet and non-intrusive storage and swings back out for easy access. BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Soft rubber pads are located on both ends to protect your desk or table from damage. The under desk mount is convenient for storing. Easy installation of a springed C Clamp.
👤We needed a better solution to keep our headphones from breaking and this was our answer, it's very sturdy and feels very well made, it's even better if you have an xbox one controller, it's even more perfect. My purse is probably around 10 lbs. I'll probably order more for myself and gifts in the future. Highly recommended.
👤The hook portion can bend if you put a lot of weight on it and it is very cheap. There is a The head doesn't lock up. The clip is not tight enough to prevent desk steps that are less than a quarter of an inch from moving. You can get a Brainwavz Hengja Hanger for the same price that has better construction quality. I would've gotten a second one, but I got this instead when the page from my old order suddenly said out of stock and started directly to a screen protectors. I wouldn't buy it again. Cheap, poor construction, plastic bends, top sticks up a lot. A bad product.
👤It's easy to put my headphones out of the way. I didn't want one where you have to use glue or screws. You don't need a heavy duty one if you have light headphones. The mount has a sufficient amount of space. The desk is protected by the padded clamps. The mount has a hook so you don't lose your headphones. You can choose which direction you want to hang your headphones. The cord clip is nice, but it's stiff, so I just wrap it around the hook and grab my headphones when I need them.
👤This thing is great. I was embarrassed that I didn't think of getting this a long time ago, but I did not know it existed. Maybe it didn't. I am a recording artist and I use expensive headphones. They were not taken very well care of in the past, as they would flop around on various surfaces. The device is easy to set up and I like that the hook can be changed to hang things or not. I think it's a good deal so that I can get another one for my other cans. I recommend this to anyone who wants to protect their investment.
👤It was easy to put in place. I got this because I was sick of my headphones laying in random places. The hook is neatly underneath. The picture doesn't show it, but there is a small loop for a cord to go through so I leave my charging chord handing from there so all my cords are close together and easy to manage. You can put the headphones on the hook and swing them out of the way under your desk. I put one on the side table for my headphones.
👤I didn't expect to write a review on this. I thought I knew what I was getting. This is a cheap, easy to scratch plastic. The cable clip would be better not there. The only. The mechanism for twisting the hook into different positions is a nice thing about this. You only need to rotation from 90 degrees and 180 degrees. The hook is pretty loose and you can position it anywhere from 0 to 180. I would have given it a pass, but the junk quality means it should be a lot cheaper than other METAL items. It would be a good deal at five bucks, since I got it for twelve ninety nine. If you don't know better, maybe eight. No way in over ten. I'll probably keep it because it's not worth it with the Pandemic. It will have to do.
The under desk mount is convenient for storing. Easy installation of a springed C Clamp. For a near universal fit on most desks, the Under Desk Headphone Hanger is used. It can be lain flat on the wall when it is not in use, folding or expanding at your convenience. It is easy to remove and re-attach the screw. Soft rubber pads located on both ends of your desk or table protect it from damage. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers, shelfs etc. It's great for hanging game controllers, cables and other gadgets. The TV stand does not have room for the soundbar. The sound bar width is less than 2.1 inches, it is 5 lbs and there are two racks to support it. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.
👤My TV stand doesn't have room for the soundbar so I used two racks to hold it. The sound bar is 5 lbs heavy and supported by two racks. I'm happy it worked out.
👤I'm glad I chose this one because there are so many different models to choose from. It has a heavy, solid feel to it, and it has a nice padding on the arm so it won't damage the furniture. It folds up when not in use. Great product! I am an actual consumer, not a fake reviewer.
👤They are very well constructed. I attached them to the end of the stand that holds my TV. I put my sound bar on them. The sound bar is small enough to fit on them, so they can hold it in front of the TV. The sound bar could not be held on the TV stand because there was not enough room.
👤This thing is perfect. My boyfriend's desk has a small lip on the sides that hangs over the sides, but it is a vintage metal desk. Since these holders are mostly designed for desks with empty space below, I had to search through a million to find one that didn't require so much depth for the tension screw. It works great after finding this one. It's easy to install, but will still hold a large clunky headset. The photos have accurate measurements.
👤There are three people working from home, one of them is a gaming son. I'm running out of places to put my headsets, my son has a gaming headset, and I've got my headset for Teams. This particular hook is unique for a couple of reasons. I like the metal construction. It blends in with any black furniture or decor. If it happens to be in a high pass area of your desk or table, the folding design will allow you to get it out of the way. The ability to adjust the orientation from a vertical to horizontal one was a feature that made this a definite purchase. My desk is made of wood and metal and has a lip on it. The standard vertical style brace clap design is useless because it is short of the height of the table. I can't use boom stands with this table because of the other accessories I have. The only thing I had to do was remove the two allen screws and attach them to the leg of the table. It is now a permanent fixture. A huge problem was solved when I reached for my headset. I bought two of them for work and one for home. A great buy.
👤I always remain objective and honest when reviewing products. I always review with information that I feel others would like to know about the product, as I always assume what I'm writing will affect the purchase. I try to go beyond surface characteristics and input into quality, value and application. I will always end the review with an answer as to whether or not I would purchase the item again, which I believe is the most critical question pertaining to the item. Let me know if you want me to review your items. I was looking for a cheap hanging solution for my headphones and this product was the only one I could say anything about. I usually have my headphones on, but it can flip up when not in use. The screw base makes it easy to use for different sizes of desks. I'll probably buy another one for my daughter. It's a very handy device, serves the purpose well, and is cheap, but sturdy. You won't be disappointed.
The dual Headphones Hanger under the desk can hold two headphones at the same time, with a headband width within 2.1inch. The rotating neck of the headphone arm allows it to be used as a storage option for heavy headphones. For a near universal fit on most desks, the Clamp can be as narrow as 5mm and as thick as 50mm. It is easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or table from damage. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.
👤I transitioned from a regular desk to a standing desk and I love it! There is a I bought the Anti Fatigue Bar to stand on so I can work on a stand up desk. I bought a dual stand under my desk so I can hang my headphones when not in use. It's very easy to install on a desk and it's very sturdy, but I like that it rotates so I can tuck it inside the desk rather than have it stick out. Absolutely nothing! There is a 5 out of 5 stars! If you need to hang stuff for storage, such as headphones, book bag, and anti fatigue bar, I highly recommend this. It's strong enough to hold anything. There is a Hope this was useful. If it was, please click on the button below. Thank you!
👤The design is subtle and easy to install, and thepadded hooks can be adjusted to your desk. There is a If you have a thicker desk, you won't have much clearance for your headphones. This was used for our headset. The hooks aren't adjusted to go lower than the C clamp, so it barely fits under the desk. I thought it would be bigger and longer because of the reviews. Would not be possible to fit 4 quality headphones on here. I thought my headphones wouldn't be a problem at my desk. It works. It works and is cheap, but not my favorite for the purpose I bought it for.
👤Excellent headphone holder! I use this to hang my headphones above my headphones amplifier at the back of my desk. There is a The steel is very strong. It is very easy to install. I like the way the hanger rotates. I will probably get another pair of headphones. This is the best I have found before. I bought another one to see which one I liked the best. The other is made with plastic and takes up more space than the other. I'm sending it back. This is the keeper!
👤I use it to hold two briefcases. The Bag of Holding is from ThinkGeek and the large briefcase is from Saddleback Leather. Hanging them from the device keeps them out of the way of the robot. It looks better than any other method of storage I have tried.
👤I wanted to buy a single hook for my headset. I found a dual headphone stand and extra wide brackets. I don't have enough room on my desk to hang this hook. I need something to hang from the shelf. It is about 2 inches thick. The hook is perfect on the edge. I use the extra long arm to throw my headset on there. I know where to find my headsets.
👤I was worried that this might not hold up because my desk has a metal tube on the bottom side, and I needed something that was strong enough to hold two pairs of headphones. I've had no issues. The item I received is not the same as the one pictured. There are two small tunnels on the plane of the headphone-holding areas near the edges that you can cut out if you want to get a cable grip. It's too wide to hold regular 3.5mm cords, so maybe it would hold woven cords?
2020 The arms of the dual headphone holder can be easily moved around by you. They won't get in the way if you put them under the desk. You can store two sets of headphones. The holder has dual 2.5in arms and is ideal for all kinds of wired and wireless headphones. The arm of the headphone hooks are equipped with arched soft rubber pads. 2. The raised parts of your headphones prevent them from falling. The Headset stand can support up to 11 lbs. It's great for purse, cables, backpack, umbrella and also for headphones. 60-day money back, 12-month warranty are included in the quality assurance and after-sales service. If you have a question, please contact them. The rubber pads are attached to the ends of the clip to protect your desk from scratches. The thickness of the desk can be mounted with the headset hanger. It's also suitable for cabinets, shelfs, and glass flat surfaces. Direct use, no installation required, makes it easy to attach and use. You can put it wherever you want. The knobs can be twisted and fixed. No need to drill holes or apply glue. It's easy to install, remove or move.
👤This one is strong. It looks and feels like plastic. The weight advantage of a plastic over a metal is given by this. There is an in-depth thought that goes into designing the product. This is one of them. There is a The arm that comes to the top of the desk has been moved so that it doesn't hurt your hand or fingers. The cushion is soft enough to hold the headphones and hard enough to last a long time. The use case difference is the only problem I see. This is made to hold the biggest headphones. You need to calculate your dimensions before buying this.
👤I like the design of the clamp for holding my headphones. The design is very sturdy. The left side of my new smart desk has a holder on it. It's so easy to remove the holder and move the desk somewhere else, I like that. I wanted a holder that could be easily removed if it was screwed into the table. The soft padding on the top part of the 2 slots that hold the headphones help prevent scratches to the headphones. The price is correct. If there is a need, I would buy this product again. Attached is a picture of the product holding my headphones. Good stuff.
👤This item is awesome! It was perfect for my use case. It is strong and stable. I have my headphones under my desk. This is a great headphone hangar/holder. Solid metal is durable, and others use plastic which can break. Very easy to install! You can protect your table and HPs by adjusting the knob on your desk. The max load is up to 11lb. Simple is beautiful! There is a There are noatable CONS.
👤It's a nice piece and it's much better value than some of the more pro-level offerings. Machined well, very nice finish, some type of power coat, looks and feels much better than expected at this price, rubber padding in the right spots, and good design. One could argue that the tips of the hooks could be better for safety, but on the other hand, it makes placing and removing the headphones easier. There is a The bottom part can be moved freely which makes mounding easy. Very happy, great value!
👤This item was what I needed. I needed something that could be removed from my desk and not be in the way. The desk is very sturdy. I have a metal bar that runs along the bottom edge of the desk and I was able to adjust the grip on it. I use it for my DJ headset. I'll be buying another one for the wired headset. The dual headset is great.
👤The thickness range could have been larger, but this stand works well for holding two pairs of headphones. I made a mistake by not measuring my table thickness. I fixed this by attaching removeable Velcro strips to my table and headphones stand. Well built and worth the price.
You don't need to worry about the quality of their headset stands because they are made from acrylic material. They are responsible with their headphones. If there is a problem with it, please let them know. Good after-sale service will be provided by them. The game controller holder is used for vertical placement of various game pads, which saves space, and up to 2 game pads and 1 headphone can be placed. You can put the controller on the stand and hang it. The mobile phone can be held in the storage organizer. Excellent. The headphone stand has a metal base, a sturdy hanger, and a low center of gravity, making it stable without being hit. The controller holder is made of rubber. The bottom of the headphone holder has a Silicone pad to protect it from slippage. The headset holder is small and light, and it's easy to carry with you wherever you go. The wireless headset stand is great for home, office, studio, bedroom or next to your TV. Their controller holder stand is easy to assemble and install. It's very easy to hang the game pad or headset on the stand if you follow the installation steps of the manual. The game controller storage brackets has passed many tests. They want to provide customers with the best products. If you have a question about the controller stand mount, please contact them and they will answer it in 24 hours.
👤I bought this to organize my desk. Normally I place my headphones on top of the computer or desk and it looks messy, but I keep my phone and tablets nearby. I don't have much space on my desktop because I use a large monitor. My phone, headphones, and tablets are on this stand. The top controller would go where my phone is. Since I was using it to take photos, you don't see it. I hang my cables on the extra arms. It is a very good stand with a lot of functions. It took about 3 minutes to set up and they provided a tool to help tighten the rods and screws. The parts that are made of rubber help protect my phone and tablets. If there are any changes in the next few months, I will update my review.
👤I dropped my expensive headphones on the ground because the glue on the hook fell off. I was looking for a stand that wouldn't take up a lot of room and hold extras. It was easy to assemble with my son, now I use it to store my gaming headphones, noise-canceling headphones, PS4 controller, Switch Pro controller, and my phone. I'm not worried that it will go off my desk because it has non-slip feet. The metal slots at the front of the case are rubber coated, so if I slid my switch or Oasis out of the case, it wouldn't hurt them. I'm confident my controllers won't slide off if the stand is bumped or when I remove them because they have a nice rubber grip on the controller rests. There is a large hook on the back for cords. I'm going to loop a micro around it to charge my headphones and PS4 controller. This little unit has a lot of the same options as a single stand.
👤I was looking for a headphone stand, but this one could also hold two controllers. I gave it a try. I'm happy with how my desk is organized, even though I thought it was just two controllers. I put my switch in the dock since it showed that you can put a switch on it. One concern is that the front doesn't have a rubber foam so you can't feel the metal. It's an okay width for some phones, but I wouldn't want to put anything wider than that.
👤Nice stand. It's easy to assemble with all the tools you need. The edges of the metal catch the foam on the headband when I use my Black shark V2 and I would give 5 stars. Nothing has been damaged. I think it will wear on the headphones eventually. It works great for controllers, switch lite, and phone display/storage. The little dips make it easier to use wired devices.
👤The look of a desk or game room is greatly improved by having the controllers and headset on the stand, compared to sitting on the table, armrest or floor. If you use most or all of the racks, it saves space. There is a The big metal base needed to balance the weight of the headset also has little rubber covered racks to hold up a phone or tablets or whatever, which is really neat. Assembly is very easy. I was given two spare screws for the bottom and four spare screws for the top, which confused me a little, but you'll have enough even if you get a bad screw.
Headphone holder desk stand products from Kafri. In this article about headphone holder desk stand you can see why people choose the product. Kafri and Lamicall are also good brands to look for when you are finding headphone holder desk stand.
Kafri, Kafri and Lamicall are some of the best brands that chosen by people for headphone holder desk stand. Find the detail in this article. Horump, Apphome and New Bee are also brands that their products are worth to check.