2020 The arms of the dual headphone holder can be easily moved around by you. They won't get in the way if you put them under the desk. You can store two sets of headphones. The holder has dual 2.5in arms and is ideal for all kinds of wired and wireless headphones. The arm of the headphone hooks are equipped with arched soft rubber pads. 2. The raised parts of your headphones prevent them from falling. The Headset stand can support up to 11 lbs. It's great for purse, cables, backpack, umbrella and also for headphones. 60-day money back, 12-month warranty are included in the quality assurance and after-sales service. If you have a question, please contact them. The rubber pads are attached to the ends of the clip to protect your desk from scratches. The thickness of the desk can be mounted with the headset hanger. It's also suitable for cabinets, shelfs, and glass flat surfaces. Direct use, no installation required, makes it easy to attach and use. You can put it wherever you want. The knobs can be twisted and fixed. No need to drill holes or apply glue. It's easy to install, remove or move.
👤This one is strong. It looks and feels like plastic. The weight advantage of a plastic over a metal is given by this. There is an in-depth thought that goes into designing the product. This is one of them. There is a The arm that comes to the top of the desk has been moved so that it doesn't hurt your hand or fingers. The cushion is soft enough to hold the headphones and hard enough to last a long time. The use case difference is the only problem I see. This is made to hold the biggest headphones. You need to calculate your dimensions before buying this.
👤I like the design of the clamp for holding my headphones. The design is very sturdy. The left side of my new smart desk has a holder on it. It's so easy to remove the holder and move the desk somewhere else, I like that. I wanted a holder that could be easily removed if it was screwed into the table. The soft padding on the top part of the 2 slots that hold the headphones help prevent scratches to the headphones. The price is correct. If there is a need, I would buy this product again. Attached is a picture of the product holding my headphones. Good stuff.
👤This item is awesome! It was perfect for my use case. It is strong and stable. I have my headphones under my desk. This is a great headphone hangar/holder. Solid metal is durable, and others use plastic which can break. Very easy to install! You can protect your table and HPs by adjusting the knob on your desk. The max load is up to 11lb. Simple is beautiful! There is a There are noatable CONS.
👤It's a nice piece and it's much better value than some of the more pro-level offerings. Machined well, very nice finish, some type of power coat, looks and feels much better than expected at this price, rubber padding in the right spots, and good design. One could argue that the tips of the hooks could be better for safety, but on the other hand, it makes placing and removing the headphones easier. There is a The bottom part can be moved freely which makes mounding easy. Very happy, great value!
👤This item was what I needed. I needed something that could be removed from my desk and not be in the way. The desk is very sturdy. I have a metal bar that runs along the bottom edge of the desk and I was able to adjust the grip on it. I use it for my DJ headset. I'll be buying another one for the wired headset. The dual headset is great.
👤The thickness range could have been larger, but this stand works well for holding two pairs of headphones. I made a mistake by not measuring my table thickness. I fixed this by attaching removeable Velcro strips to my table and headphones stand. Well built and worth the price.
It's compatible with all gaming headsets and headphones. It could be used to hold other things. The dual arms and headphone holder are specially designed to hang two headphones at the same time, making your headsets in place for jumping into your games anytime. It is compatible with all headphones with a headband under 1.37inch. The headset hook is designed for Multi-Scenarios and is great for hanging other products like umbrellas, backpacks, purses, shopping bags and so on. It is widely applied under the wooden, glass or metal desk, table, cabinet, shelf in the office, home, dorm, cyber cafe and other scenarios. You could place your headphones or other items in order and have them ready to use whenever. The headphone hook can hold items with maximum loading up to 4.4lb. When you need it, additional glue will be used. There is no need to worry about damaging the desktop. It is more appropriate to mount screws up to 11lb when more firmness is needed. The lightweight aluminum headphone hanger is sturdy enough to hang the heaviest headphones without bending or breaking, reducing the risk of dropping of headsets. Double protection from scratching and dropping will be provided with smooth edges and raised tips. There is a headset hanger and a screw for the alternative. You can request a free replacement within a year and a full refund within 60 days if it's due to non-human reasons. Feel free to contact them with any questions or suggestions through Amazon Messages.
👤To keep it short, there is a lot of off-brand accessories that you could drown in while trying to find the best one. The price was right and the reviews were good, so I took it and don't regret it yet. The first thing I noticed was how small the real estate on the hooks was compared to the pictures. I'm using a PAWW brand "WaveSound" model noise-cancelling set and, while they do fit on the hook, they don't fit in the room. It's not a lot of room. There is a My plan for mounting this hook was to first eyeball it a bit, then adhere it if necessary, and then use the provided screws and screwholes to finalize it in place. The first couple steps went well. I got it more or less where I needed it, and after trying to remove the plastic side of the taped strip that was stuck to the base, I thought, "Maybe I'll just move this in a little more." No. If they used red 3M tape, I could stick the base of my TV to the ceiling, provided I was given enough. There is no way to remove that tape without using tools. There is a I decided to drill the base in place and add some security because I was a little defeated, and I wanted to make sure it didn't come undone. Unless you're using a drill that is the total of the size of your finger, there is absolutely no way you're going to be able to use the provided screwholes to screw this base in. I had to go in at a 17-degree angle from each side to get this drilled in place. If you're worried about hanging this mount in a place that the screws might be noticeable to others, I would look elsewhere, and unless you have a professional-grade drill attachment, I don't think there's much that can be done to remedy it. The mount hook accessory is designed to keep your wares out of sight and the screws are small enough to get the job done. Although the screwholes are not the best design, I don't think there will be any problems with this particular brand and model.
👤It won't fit most headphones. The unit is small. The head band is too thick to fit in the tiny opening of the headset. The band on my other headset is too wide to fit. There are pictures of what must be children's headphones. Two would not fit side by side. I'm keeping it because it's a perfect size for a keyring hook.
👤I chose this over the other more expensive options. This is easy to use. I don't think it will fall off before I get rid of this desk, it's simple to install and it's sturdy. It has two sided tape that is strong enough to hold it in place until you can put the two screws through it. The screws are not flush. If you look at it from underneath your desk, it's pretty ugly. It was about $5 and I would prefer a perfect flush mount. I can buy screws or find them in my tool box. I'm not complaining and I'm the only one who will notice when one of the screw heads protrudes from my office chair. Anyway. I got one moreusb cord off the top of my desk and mostly out of sight because the headphones hanging won't fall down. If I knew the screw head would protrude, I might have set the brackets back a half inch. It would be out of sight. The only reason I lined it up was to make it as straight as possible. For that, mission accomplished.
Universal design - hold your headphones and controllers in one place. It applies to a bag, umbrella, backpacks, keys, cables, etc. To accommodate accessories, please adjust the little arms of the hanger. 1 Hanger Holds 2 The dual arms of the headphone hanger can hold two headsets at the same time, keeping your headphones organized and ready to use. It is compatible with all headphones with their headbands within 1.37inch. The headset hanger is widely used under the glass, wooden or metal desk, table, shelf, cabinet in the home, office, dorm, cyber cafe and other scenarios. It could also be used to hang other items, such as purses, shopping bags, umbrellas, etc. A neater environment will be created with this hook. The design is user-friendly. The mount is lightweight and sturdy with premium aluminum, so that it won't break even if you hold the heaviest headphones. The raised tips on your headsets prevent them from falling. When you need to replace something in unforeseen circumstances, you will be able to do it with extra glue. Two mounting methods. The headset stand can be mounted without causing damage to the desktop surface, and it can hold up to 4.4 lbs. With screws, the headset hook could be installed for more firmness. Choose the installation method that is right for you. You can get a refund within 60 days or a free replacement within 12 months if you have non-human reasons. You can contact them via Amazon Messages if you have any questions.
👤This double-hook headphones holder does exactly what it is supposed to do. It holds two pairs of headphones side by side. The double-sided hook makes it easy to store and remove your headphones from underneath a desk or shelf. I gave the Adhesion category a 4-star rating, since I have only been using it for a week and it has a tight seal. I am confident that it will be long- lasting since it is made with a 3M adhesive and includes a replacement strip. There is a It is recommended that you allow 24 hours for the glue to seal completely before hanging your headphones. This is part of the instructions. I purchased this one because of its design quality and price, and I am very satisfied. I hope this insight helps you make a buying decision, as I am not an employee of this seller or a representative of this industry. All the best!
👤I couldn't find a way to hang the heat gun on the side of my crafting table after I bought it. Many of the headphone hangers are plastic or foam, and I thought they would be perfect. This one is made of metal, not plastic or foam. It's the perfect size to fit under the edge of my crafting table for my heat gun. The gun is held with the nozzle up so that the heat won't affect the motor. There is a This comes with a glue to stick it on, but also a couple of screws to put it in my table. This isn't designed for this purpose, but it fills the bill perfectly.
👤I wanted to hang my headphones under my desk. The desk has a smooth bottom that should accept the included glue, but I decided to use the included screws just in case. It was difficult to install the screws due to the design of the headphone hanger. Since a screwdriver cannot be driven at a straight angle, the screws need to be put in at an angle. I predrilled the holes for the screws, but since the screw goes in at an angle, it sheared the screw off. I was disappointed that the screw sheared so easily, and the design made it nearly impossible to install the screws, because I was using a hand screwdriver to drive the screw. It is a good material and slightly smaller than I thought.
👤I like that it's double sided and works well for my purposes. It will be too narrow for some headphones. I found the measurement listed to be accurate. I only use this to store one pair of headphones and the other hook for hanging cables that aren't in use. I would like to secure it with the screws provided, but unfortunately the way it's designed makes it difficult to approach from an angle. I'm not sure how you could get the screw all the way in. You would need to drill a hole before you install the glue, and poke holes through it, so that's something to keep in mind. Unless you plan to put something heavier on this, it's not necessary. I wouldn't try to use the screws for something like a bag hook because they are small and mount from two corners.
There is a 2 year satisfaction guarantee forValuable gift for Christmas, Thanksgiving day, Easter, Birthday, Valentine's day and more. Hook can hold up to 10 pounds. The heaviest headphones weigh about one pound. 3M VHB tape is used to adhere the aluminum material and soft silicone pad. One headphone hanger with 3M VHB tape. mounting on computers, desk and wall is durable.
👤The frame doesn't bend without some force applied to it. The color of the product is great, but it doesn't scratch easily, like some other products that will scratch and ruin the look. Installation is the easiest thing in the world, stick to the spot, good to go. There is a There are pros and cons. My circumstance doesn't allow me to use the provided screws to install the hook. I bought this product because it came with a sticky pad. I have headphones that are not much heavier than the ones I use. The sticky pad didn't stick for long. It may have started peeling away from where it was placed a week before. I thought it might have been a mistake, but it wasn't. It's a very simple fix, I just bought better double sided tape and I haven't had an issue with it after that. I had to go out of my way to make it better, so I had to dock it some stars. That may be useful information for some people. The tape was not very good, but I am happy with the rest of the product. There is a This style of hook is perfect and many prefer it over the above desk ones. If you are able to do that even better, the color doesn't chip away, and the material comes with screws if you are able to do that, I would recommend this product over others. If you plan on using it that way, you should install a better quality double sided tape.
👤I didn't expect the glue to bond to my desk to be welded on. I am either weak or it has its own pull that was reinforced using superglue. It's important to plan where it's going to stay.
👤I put this under my desk with the 3M double sided pads. It is small but works for my G930's. The material is very strong. There is a The best part is that they included small clips. I was able to run the charging cable cleanly underneath my desk. There is a Overall happy. It was a bad deal for the quality.
👤I stuck it too close to where my legs were, and it would occasionally hit me. It sticks very well if it does what it's supposed to. The HyperX Cloud II headset is in place.
👤I can't stand the amount of stuff on my desk. I did not want a headphone rack because it was at risk of being knocked over. The metal is heavy for its purpose and won't bend. The mounting tape did not work. I used the screws that came with it. It was kind of annoyed. I didn't want to put holes in my desk. Overall happy with it.
👤The purpose of it is to serve as a headphone hanger. It is made of aluminum and feels sturdy. The only reason I'm giving it two stars is because it's not as advertised. There are 4 holes in the hook. Two (2) are located in the center of the hook and two (2) are located towards the top of the hook, which has slots to allow sliding the hook onto screws. I don't care if it's not what I ordered, since it does its job and I don't see it under my desk.
The dual Headphones Hanger under the desk can hold two headphones at the same time, with a headband width within 2.1inch. You can charge your smart device without a plug in wall with the 5 port smartusbcharging unit. It can detect your device and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amps overall. You need to use different ways to hold your under desk, so come with 2 screws and 3M VHB tape. Please clean and dry the surface of the desk and stand before you install it. Wait 24 hours before using. 6 cable management hooks for keeping cables neat and organized are included in the cable organizers. Saving space for your phone and headsets is helped by it. Can hold two sets of headphones. The arms are not the same. Their promise is to make sure you are 100% satisfied with your purchase of their products. They will give you lifetime warranty service if you have any questions. You are both a customer and a friend.
👤This is very nicely placed under my desk. I don't use screws because the tape looks strong. It supports my headphones. There is a The side wings have a notch on them. It saves space and I don't have to have a headphone holder. There isn't a way to turn off the blue lights. Overall 5 stars.
👤I have a tv stand above my couch that makes it hard to charge my phones and controllers. The kit does a great job of charging my equipment. I used screws instead of tape and it was easy to install.
👤An amazing find. I used 3m double sided tape. It does come with some tools to set it up, but mine didn't damage it. I like it. If you're looking for a way to charge your items without having to use an outlet, then buy it. I wire managed it, but it is not a brick charging point. A long cord is attached to the item.
👤I bought this stand to keep my headset out of sight. I used the screws that came with it to attach it to my desk, so I can't comment on the strength of the 3M tape. It's made of plastic and doesn't feel weak, but I'm afraid to hang up my headsets. It comes with a screwdriver, brackets to help guide the power wire in place under the desk, and double sided tape for the brackets. The built in ports are nice, but it would have been nicer to have a few more ports.
👤I like this thing. It keeps my things out of my way all the time. Everyone always needs moreusbs at your desk. The screw brackets and sticky tape are pretty good. I used double sided tape because I was skeptical if it would stick in the middle of the night. It seems very sturdy for the price. Would recommend. Everyone with a computer needs one of these.
👤I used to have a small extension cord with 3usb drives that I used to charge my phone, headphones, watch, and other things from, but I was short of the 3.0 rapid charge. The device solved my issues and gave me a place to hang my headset. The wings are barely big enough to fit the headset, and they seem a little flimsy.
👤The unit is described on Amazon. I was surprised that the box was not sealed when I received it, as I thought it had to be. Some of the 3M tape was bent up, but still applied. Time will be the most important. I plan to take my devices out of use after being charged. Rather be safe. There is a My desk is cleaner because I have a place to put my noise canceling and headsets. God bless!
👤The "wings" that hold a headset aren't long enough to hang anything from, and it doesn't attach well to my power strip. Does not help with cable management. Disappointed in the work.
The under desk headphone hanger saves space. Keep your desk clean. You can easily access the headphones. The material is high quality and elegant. The headphone hanger has been updated to make it safer. It's perfect for different types of headphones. umbrellas, handbags, hats can be hung. The design of the headphones keeps them safe from scratching and dropping. Stick the cover of the double-sided glue under the desk or somewhere else you want. Make sure the surface is clean and smooth before use. Please don't jump into it.
👤This is the first time this hanger has done the job. The finish and material are more important than my rating would suggest. Basic cheap plastic is used to keep this at a reasonable price. I'm not adverse to the material despite my description. It is both cheap and plastic. The finish is the problem I have. There are raised edges that could've been rounded off. If you put this under your desk, you'll experience some leg hairs getting shaved off. If you can get one that's built a bit better, or a metal one that's been made better, then go for it. If you don't care much about finish or materials, this is the way to go.
👤The price is amazing and I love it. I've never had a good experience with this kind of tape as it tends to be weak holding up a small photo. After mounting my headset to my desk, the ones included held it up. The desk is perfectly matched by the hanger. I will definitely buy this product again in the future and I don't regret buying it. I wish I could change where I put it. I hit my knee against it because it was so far from my desk. I put it too far out of my desk so I made sure to put it under the desk. I have had no issues with it and would recommend it to anyone.
👤Many of the reviews talk about it breaking, but that is not true for the users. These are plastic, decent strength, but will not hold against a hard hit. Otherwise it should be made of metal. These are for holding your headphones. The 3M glue works great. If you need to replace them or move them in the future, it comes with 2 extras. You can either screw them in or not. Not much to say. They work. I have had no issues. I'm pretty sure it won't hold up if you pull down on them or hit it against your chair. Don't blame the product for that. I've had mine for a while now and it still looks brand new. There is no degradation of plastic.
👤I've always placed my headphones on my desk, but it was consuming more space than I wanted. I saw the great price and decided to buy it. I don't regret it. I'm impressed with this little piece of furniture. My headphones were able to carry their weight. I attached it to my bookshelf next to my desk, but the wood there is weak, but this hanger is sticking to it perfectly. The seller includes sticky sheets for the hanger to attach to. I thought it was nice of them to include extras. I'm happy with my purchase.
👤The item was as expected, but I had to remove the glass from my desk. A small bump shattered the acrylic and created a deep cut. If you don't have to move it, but if you have to remove it, you should not buy it. Go for an aluminum version.
Customer service is great. Give it a try. You can return it within a month if you don't like it. They will send you a new one if it is faulty within a year. Universal under design allows for a near universal fit on most desks by attaching a thin, narrow, and thick piece of metal to them. It is easy to remove the Spring Clamp. The audible headphone arm swings underneath your desk for discreet and non-intrusive storage and swings back out for easy access. BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Soft rubber pads are located on both ends to protect your desk or table from damage. The under desk mount is convenient for storing. Easy installation of a springed C Clamp.
👤We needed a better solution to keep our headphones from breaking and this was our answer, it's very sturdy and feels very well made, it's even better if you have an xbox one controller, it's even more perfect. My purse is probably around 10 lbs. I'll probably order more for myself and gifts in the future. Highly recommended.
👤The hook portion can bend if you put a lot of weight on it and it is very cheap. There is a The head doesn't lock up. The clip is not tight enough to prevent desk steps that are less than a quarter of an inch from moving. You can get a Brainwavz Hengja Hanger for the same price that has better construction quality. I would've gotten a second one, but I got this instead when the page from my old order suddenly said out of stock and started directly to a screen protectors. I wouldn't buy it again. Cheap, poor construction, plastic bends, top sticks up a lot. A bad product.
👤It's easy to put my headphones out of the way. I didn't want one where you have to use glue or screws. You don't need a heavy duty one if you have light headphones. The mount has a sufficient amount of space. The desk is protected by the padded clamps. The mount has a hook so you don't lose your headphones. You can choose which direction you want to hang your headphones. The cord clip is nice, but it's stiff, so I just wrap it around the hook and grab my headphones when I need them.
👤This thing is great. I was embarrassed that I didn't think of getting this a long time ago, but I did not know it existed. Maybe it didn't. I am a recording artist and I use expensive headphones. They were not taken very well care of in the past, as they would flop around on various surfaces. The device is easy to set up and I like that the hook can be changed to hang things or not. I think it's a good deal so that I can get another one for my other cans. I recommend this to anyone who wants to protect their investment.
👤It was easy to put in place. I got this because I was sick of my headphones laying in random places. The hook is neatly underneath. The picture doesn't show it, but there is a small loop for a cord to go through so I leave my charging chord handing from there so all my cords are close together and easy to manage. You can put the headphones on the hook and swing them out of the way under your desk. I put one on the side table for my headphones.
👤I didn't expect to write a review on this. I thought I knew what I was getting. This is a cheap, easy to scratch plastic. The cable clip would be better not there. The only. The mechanism for twisting the hook into different positions is a nice thing about this. You only need to rotation from 90 degrees and 180 degrees. The hook is pretty loose and you can position it anywhere from 0 to 180. I would have given it a pass, but the junk quality means it should be a lot cheaper than other METAL items. It would be a good deal at five bucks, since I got it for twelve ninety nine. If you don't know better, maybe eight. No way in over ten. I'll probably keep it because it's not worth it with the Pandemic. It will have to do.
The under desk mount is convenient for storing. Easy installation of a springed C Clamp. For a near universal fit on most desks, the Under Desk Headphone Hanger is used. It can be lain flat on the wall when it is not in use, folding or expanding at your convenience. It is easy to remove and re-attach the screw. Soft rubber pads located on both ends of your desk or table protect it from damage. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers, shelfs etc. It's great for hanging game controllers, cables and other gadgets. The TV stand does not have room for the soundbar. The sound bar width is less than 2.1 inches, it is 5 lbs and there are two racks to support it. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.
👤My TV stand doesn't have room for the soundbar so I used two racks to hold it. The sound bar is 5 lbs heavy and supported by two racks. I'm happy it worked out.
👤I'm glad I chose this one because there are so many different models to choose from. It has a heavy, solid feel to it, and it has a nice padding on the arm so it won't damage the furniture. It folds up when not in use. Great product! I am an actual consumer, not a fake reviewer.
👤They are very well constructed. I attached them to the end of the stand that holds my TV. I put my sound bar on them. The sound bar is small enough to fit on them, so they can hold it in front of the TV. The sound bar could not be held on the TV stand because there was not enough room.
👤This thing is perfect. My boyfriend's desk has a small lip on the sides that hangs over the sides, but it is a vintage metal desk. Since these holders are mostly designed for desks with empty space below, I had to search through a million to find one that didn't require so much depth for the tension screw. It works great after finding this one. It's easy to install, but will still hold a large clunky headset. The photos have accurate measurements.
👤There are three people working from home, one of them is a gaming son. I'm running out of places to put my headsets, my son has a gaming headset, and I've got my headset for Teams. This particular hook is unique for a couple of reasons. I like the metal construction. It blends in with any black furniture or decor. If it happens to be in a high pass area of your desk or table, the folding design will allow you to get it out of the way. The ability to adjust the orientation from a vertical to horizontal one was a feature that made this a definite purchase. My desk is made of wood and metal and has a lip on it. The standard vertical style brace clap design is useless because it is short of the height of the table. I can't use boom stands with this table because of the other accessories I have. The only thing I had to do was remove the two allen screws and attach them to the leg of the table. It is now a permanent fixture. A huge problem was solved when I reached for my headset. I bought two of them for work and one for home. A great buy.
👤I always remain objective and honest when reviewing products. I always review with information that I feel others would like to know about the product, as I always assume what I'm writing will affect the purchase. I try to go beyond surface characteristics and input into quality, value and application. I will always end the review with an answer as to whether or not I would purchase the item again, which I believe is the most critical question pertaining to the item. Let me know if you want me to review your items. I was looking for a cheap hanging solution for my headphones and this product was the only one I could say anything about. I usually have my headphones on, but it can flip up when not in use. The screw base makes it easy to use for different sizes of desks. I'll probably buy another one for my daughter. It's a very handy device, serves the purpose well, and is cheap, but sturdy. You won't be disappointed.
Two preset heights give you maximum control over the level of your computer screen to improve posture and prevent neck and back pain. There is a notice. It is not possible to use it for painting a wall. If you paste to the wall, it will fall down. Make sure the surface is smooth, dry and oilless, and hang your headphones after 24 hours to make sure the hanger is firmly stuck. 500g is the max total weight. The headset holder with a magnet can be used when it is not in use. The arm of your headphones is covered with a soft rubber pad to protect it from slipping and scratching. The headphone hook has a strong sticky design, which can be applied to any smooth and clean surface. Hold your earphone in a firm position. Remove the sticker and stick it under your desk. It's great for hanging cables, hats and other gadgets to the kitchen counter, bookshelf, studio and company. A multi-purpose hook. The under desk mount is compatible with almost all wired and wireless headphones.
👤Does what it says it does. No issues.
👤I like the design. It's easy to hide and doesn't get in the way. It flips closed when you don't use it for headphones. It was easy to install, just remove the paper from the device and stick it on the spot you want it. The second adhesive pad they sent will help if The adhesive ever wears out. Overall, a great purchase, it does what I wanted it to do.
Premium chips and circuits are built to ensure device safety. There is an anti-scratch pad. You can get a worry-free service, a headphone stand, and a 5ftusb cord. The drawer is hidden under the desk and creates additional storage space, making it easy to find what you need, all your essential items can be organized perfectly and free ofcluttering. The griddle is made of high quality steel and is durable for a long time. The black powder coat finish is anti-scratch. It is strong enough to hold up to 12 lbs. There is a cutout for cables. Large space. The drawer is large enough to hold regular items, such as an iPad, phone, books,pens, pencil,caculator,charger,headphones or other regularly items. Installation is easy with 4 mounting holes for the drawer and 2 for the headphone holder. It's suitable for most kind of table, such as laptop table, study desk, dining table, computer table, bookshelf, wardrobe, cabinet, cupboard, workstations, Office desks, and gaming Battle Stations. The space-saving design of their organizers can help you save desktop space and give you an effective compact storage solution for your desk. The appearance of the desktop is not affected by hidden design. The space-saving design of their organizers can help you save desktop space and give you an effective compact storage solution for your desk. The appearance of the desktop is not affected by hidden design.
👤I couldn't find a metal tray for less than $40 after browsing Amazon for hours trying to find one. I stumbled upon this. There is a It is exactly what I needed. I use it to keep my audio interface, phone, and other small items off of my desk. The cutout in the back was perfect for cable management. I already have a desk with a headphone hook.
👤It was a perfect fit for my audio interface. The cut out in the back is still working. The unit is heavier than I thought it would be. To not have to drill into the desk to save time and work. I used gorilla brand mounting tape from a hardware store. It adds a sweet look to your setup.
👤I hid the slim client under my desk.
👤The headphone hooks are useless because they were cut wrong. The whole thing is not very strong. It will not be useful for much.
👤It works as expected. Excellent quality.
👤This was what I needed. I used screws because I have not had good luck with the tape in the past. It helped me organize and save space.
👤The product may not stay where you decide to drill it into. Before purchasing this item, you should buy screw anchors.
If you care about compatibility, style and quality, this gaming accessories is the best choice. It's a great gift for your kids, gaming friends, boyfriends, etc. All in one design, under-desk headphones stand, 3usb charging hub and 4A-20W. Can hold two sets of headphones and keep your headphones out of sight. 3 Port SmartUSB Charger:Detects your device automatically to deliver its fastest possible charge speed up to 2.4 Amps per port or 4 Amps overall. TheSafe Guard is a fire-resistant and hardened plastic outer shell that is built-in premium circuitry and a chip that ensures device safety. Quality Gourmet provides a 90-Day Money Back Guarantee and a 24 month warranty that will ensure you a hassle-free purchasing experience. If there is a quality issue with this headphone rack, please contact them.
👤Great idea and concept. Didn't find anything else like this. The included wire management tie down clips were helpful. The wire holding cutouts on the parts are very nice. I like the monocolor of the grey outputs that came with mine. It takes a bit to take off with 3M VHB tape. The power line runs below the unit, which would make wire management easier. You can see what I mean by looking at my photo. If the cable ran through the back, it would have been a cleaner look. The power cord is a tad short, as many other users pointed out. It fit my setup well, but I wish it was longer. Great product, all in all. This is definitely an improvement over the previous ones, as it was from a regular under the desk headphones. Would it be interesting if they had a version of this that was not powered so you could connect it to a computer? It's helpful for people with headphones that have ausb type.
👤This is a review for something. Skip the other headphones. You will get more bang for your buck with this. Way better than those overpriced headphones. Get this. You get a better quality hanger and also a charging port for your devices. The price is almost unbelievable when you consider that you don't get cable channels or a portable charging device. What I like. There are two headphone hangers. There is a There are cable channels for earphones. There are threeusb DC chargers! There is a Double-sided or a more permanent screw mounting is what you should use. Includes hooks for tidier desks. The packaging is gorgeous. There is a good separation between the headphones. Inexpensive. Not braided cable is what I don't like. There is a power cable. The power cable is at the bottom. The package has a headphone hanger with pre-applied double-sided tape. Extra double-sided foam tape. There are two screws. Three cable hooks are under the desk. There are printed materials. If you decide to mount using that option, you might need to change the double sided tape on your desk. I highly recommend this product, it has 5 stars out of 5. Hit the comments. This review is for something.
👤It works well. Even when I have my beats headphones, gaming headphones, and watch on it, it's very sturdy. There is a I don't have to worry about how fast it charges, it will work if I use 3 ports at the same time. It will charge on and off at will. I usually charge my devices and watch them at the same time. I'm not sure if it's because of the ipad pro or not.
👤One of theusb ports decided to self destruct. Quality is questionable. Contacting MFG to find out how customer support is. Good quality. The mounting screw-hole would have been blocked if the power cable had been oriented facing backward. A power cable would have solved this issue. The loop is not very noticeable when you mount it back from the desk. The product functions as intended. I wish this had at least one plug.
Headphone holder desk under products from 6amlifestyle. In this article about headphone holder desk under you can see why people choose the product. 6amlifestyle and 6amlifestyle are also good brands to look for when you are finding headphone holder desk under.
6amlifestyle, 6amlifestyle and 6amlifestyle are some of the best brands that chosen by people for headphone holder desk under. Find the detail in this article. Yocice, Horump and Amovee are also brands that their products are worth to check.