You can hang the headset and extra cable on the front hook and the back hook is used to hang bags. The band of your headphones won't be damaged by soft PU leather. The jaws of the clamp can open wide, and the protective pad can be attached to a desk. It is easy to install and a good solution to keep your cans from getting scratched. Distinguishing: The package includes: Headphone hanger x 1, hex wrench x 1, and a second one. Devices and accessories are not included.
👤It's a nice idea, but I put my backpack on it and it lifts up from my desk. It needs to be able to hold onto the desk.
👤My desk is very narrow and I needed a long piece of furniture. This did the trick, but barely. It is sturdy even so.
👤It's poorly designed so it moves around a lot, so you can't really tighten it.
👤It is easy to install a stand that will keep headphones and wires off the desk.
👤I hang my purse under my desk at work. It's better than those small purse hangers.
👤The product was good, but shipping took forever.
👤Arrives as described. It's helpful to have my bag and headphones at my desk.
A headset stand with built in charging station and built in headset hooks can be used to hang two sets of headphones or smart accessories. There are three USB A ports on the device. It supports workspace organization. It's easy to crowd your desk with gaming accessories or hybrid work equipment. The headphones stand can be used as a headset mount. Store your headphones on the hooks. The power cord is routed through two cable clips for a clean and organized look. Your desk needs to be adjusted. You can make your workspace more productive by decluttering your desktop. Adding a headphone stand with a charging port will make it easier to charge your headphones. Charge headsets, computer accessories, gaming desk accessories, cell phones, and smart devices. There are technical specifications for theusb a charge 100 - 240V - 50/60Hz 0.6A MAX. The output is 5V 4.8A total. No data connection, only charging. Installation is easy using the included 3M VHB tape or wood screws. The wood screws are for desks with unfinished surfaces that are at least a quarter-inch thick. The under desk headphone holder is ideal for gaming setup accessories and replaces a bulky desktop headphone holder stand that takes up too much space. The desk headphones holder has a dual headset hook. There is a power cord, AC cord, 2 cable clips, and wood screws for the unfinished surface desk attachment.
👤This is great! The strips that came with it were small, so I didn't bother trying to use it. I will probably use them for something else. It does what I need it to do and came with all the necessary parts. The figure 8 is the one that goes straight to the wall. When you have something plugged in and charging, you can hear a faint squeaking sound because of the electricity. For someone who is sensitive to high pitched noises, it could get annoying.
👤I have been postponing getting a stand for my headset for too long, and luckily I chose the right brand and product. It fits my Steelseries Artic 7 gaming headset perfectly, it blends in with my desk, and it's very sturdy. The charging ports are very convenient. I have a short cable to charge my headset. I've owned this for about a month and I haven't had any issues. There are some poorly designed headphones under the desk that can cut you. You don't want to attach anything below your desk that isn't sturdy, low profile, and blunt, so avoid cheap sharp plastic. Stay healthy!
👤The sound is good. I bought two sets because I'm old and hard of hearing but my grown son who is my electronics guy hears just fine. We can adjust the volume to our liking even if we don't get the same sound from one video to another. I can't comment on the topic as there wasn't anything to adhese. My son says it was easy to set up.
👤I'm not sure what to say. I bought it to get my headphones off. I put it under the desk and hung my headset from it. Not a single problem to date. I'm happy with the quality of it.
👤There are some complaints about the sticky not working. The man was very well sticked. You should like the placement because it can't be moved.
👤My husband drilled it on the desk because it didn't stick well with the sticker. It has been okay so far.
👤Bigger than I anticipated. I was thinking about putting something on the nightstand. It is too big for my desk.
👤I wanted a better way to store my new wireless over the ear headphones. The under-desk mount that allows me to plug the headphones in for charging is an elegant and simple solution. The stand is adhering to my desk. It works very well.
👤Plastic, cable, and ports are all of the highest quality. It looks good and sticks to the desk.
Premium quality is made of aluminum metal. 60 days of money back is included in the Headset Holder Warranty. Double Headphones Hanger can hold two headphones at the same time, with a headband width within 2.1inch, such as a gaming headphone, children headphone, and so on. You can charge your smart device without a plug in wall with the 3 Port SmartUSB Charger. It can detect your device and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amps overall. The lights are RGB. The RBG Headphone Stand can display 9 colors changing effects to create an amazing game atmosphere at your preference, that can be selected by pressing a Touch switch. Great gifts for men and women. Fire-resistant and hardened plastic outer shell, build-in premium circuitry and microchip ensure device safety. A multi-protection system protects against overload, short-circuits, over-current and other charging issues. If there is a quality issue with this headphone rack, please do not purchase it.
👤It's a nice idea, but it doesn't live up to the potential. Is a decent job holding on to the desk, not sure if it will take too much weight. The lip at the top is not more than 1/2 inch. There is a flaw in theusb C port It won't register as charging my phone, but it will charge my ear bud case. I didn't return it because of that. The swap for a better power supply didn't help. It doesn't provide enough power to the port. The charging cable on the A port does not generate enough juice to quickly charge my phone. Pressing and holding the button will shut off the light.
👤I am always on the phone. It's helpful to have a place to hang my headset in my desk. There is a I like that I can charge a few devices here. There is a I don't like the fact that there is a circle of light on the front. The light is in motion. If you have this in an area where you sleep, it could keep you awake. The light show could make you sleepy. I'm not sure if it works that way, but I'm trying to see the bright side. I made a new year's resolution to be more positive.
👤There are no options for one color or different modes in the RGB lights. I don't like them but the rest of the things are very well made and I have to give it 5 stars. The hub is nice. I mounted it under my desk because it was strong enough to handle. It's under my desk to hide the mess of wires.
👤If it fell down immediately or within 20 minutes of installation, it wouldn't be possible to hold onto the table and plug in to the wall at the same time. If your space is set up just right, you're good, but other than that, good luck! I felt like the item was false in the description.
👤The convenience factor is great. The attachment screw is set up to be too close to the brackets, which is a manufacturing defect. Result: The cheap plastic cap on the end of the screw makes the device slip off with the smallest of movements, like hanging a set of headphones.
👤I own a few pairs of headphones. A mic and tooth for my phone. I think they fit on my desk. The unit is held sturdy by the clamps. It is handy to have both the 2 and 1 charging ports. The light is funky. It would be nice to have the option of turning it off, but I can set it to whatever color I want or let it spin through the various colors. I am very happy with the purchase. It gets my headphones off my desk. I highly recommend it.
👤It's a great addition to my set up and helps me keep my headphones organized. I love that the lights can be turned off and that the extra outlets are clutch. I have been using it for almost a month and it has never moved. The plastic feels cheap but I can't complain about the price.
You can match a variety of styles. Hook can hold up to 10 pounds. The heaviest headphones weigh about one pound. 3M VHB tape is used for theAdhesive. One headphone hang with 3M VHB tape and 2 cable clips. mounting on computers, desk and wall is durable.
👤It was too sharp on the edges. I never installed the bd.
👤I used 2 of my studio headphones in my office and one of my PS5 headphones in my work desk. Works well for both. Highly recommended.
👤It is a metal hook that has good elasticity.
👤Not the best quality. Things fall easily when there is a flat angle.
👤I hung mine from some floating shelves. Very strong.
👤This product is what I like about it. The size is perfect.
Customer service is great. Give it a try. You can return it within a month if you don't like it. They will send you a new one if it is faulty within a year. Universal under design allows for a near universal fit on most desks by attaching a thin, narrow, and thick piece of metal to them. It is easy to remove the Spring Clamp. The audible headphone arm swings underneath your desk for discreet and non-intrusive storage and swings back out for easy access. BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Soft rubber pads are located on both ends to protect your desk or table from damage. The under desk mount is convenient for storing. Easy installation of a springed C Clamp.
👤We needed a better solution to keep our headphones from breaking and this was our answer, it's very sturdy and feels very well made, it's even better if you have an xbox one controller, it's even more perfect. My purse is probably around 10 lbs. I'll probably order more for myself and gifts in the future. Highly recommended.
👤The hook portion can bend if you put a lot of weight on it and it is very cheap. There is a The head doesn't lock up. The clip is not tight enough to prevent desk steps that are less than a quarter of an inch from moving. You can get a Brainwavz Hengja Hanger for the same price that has better construction quality. I would've gotten a second one, but I got this instead when the page from my old order suddenly said out of stock and started directly to a screen protectors. I wouldn't buy it again. Cheap, poor construction, plastic bends, top sticks up a lot. A bad product.
👤It's easy to put my headphones out of the way. I didn't want one where you have to use glue or screws. You don't need a heavy duty one if you have light headphones. The mount has a sufficient amount of space. The desk is protected by the padded clamps. The mount has a hook so you don't lose your headphones. You can choose which direction you want to hang your headphones. The cord clip is nice, but it's stiff, so I just wrap it around the hook and grab my headphones when I need them.
👤This thing is great. I was embarrassed that I didn't think of getting this a long time ago, but I did not know it existed. Maybe it didn't. I am a recording artist and I use expensive headphones. They were not taken very well care of in the past, as they would flop around on various surfaces. The device is easy to set up and I like that the hook can be changed to hang things or not. I think it's a good deal so that I can get another one for my other cans. I recommend this to anyone who wants to protect their investment.
👤It was easy to put in place. I got this because I was sick of my headphones laying in random places. The hook is neatly underneath. The picture doesn't show it, but there is a small loop for a cord to go through so I leave my charging chord handing from there so all my cords are close together and easy to manage. You can put the headphones on the hook and swing them out of the way under your desk. I put one on the side table for my headphones.
👤I didn't expect to write a review on this. I thought I knew what I was getting. This is a cheap, easy to scratch plastic. The cable clip would be better not there. The only. The mechanism for twisting the hook into different positions is a nice thing about this. You only need to rotation from 90 degrees and 180 degrees. The hook is pretty loose and you can position it anywhere from 0 to 180. I would have given it a pass, but the junk quality means it should be a lot cheaper than other METAL items. It would be a good deal at five bucks, since I got it for twelve ninety nine. If you don't know better, maybe eight. No way in over ten. I'll probably keep it because it's not worth it with the Pandemic. It will have to do.
The under desk mount is convenient for storing. Easy installation of a springed C Clamp. For a near universal fit on most desks, the Under Desk Headphone Hanger is used. It can be lain flat on the wall when it is not in use, folding or expanding at your convenience. It is easy to remove and re-attach the screw. Soft rubber pads located on both ends of your desk or table protect it from damage. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers, shelfs etc. It's great for hanging game controllers, cables and other gadgets. The TV stand does not have room for the soundbar. The sound bar width is less than 2.1 inches, it is 5 lbs and there are two racks to support it. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.
👤My TV stand doesn't have room for the soundbar so I used two racks to hold it. The sound bar is 5 lbs heavy and supported by two racks. I'm happy it worked out.
👤I'm glad I chose this one because there are so many different models to choose from. It has a heavy, solid feel to it, and it has a nice padding on the arm so it won't damage the furniture. It folds up when not in use. Great product! I am an actual consumer, not a fake reviewer.
👤They are very well constructed. I attached them to the end of the stand that holds my TV. I put my sound bar on them. The sound bar is small enough to fit on them, so they can hold it in front of the TV. The sound bar could not be held on the TV stand because there was not enough room.
👤This thing is perfect. My boyfriend's desk has a small lip on the sides that hangs over the sides, but it is a vintage metal desk. Since these holders are mostly designed for desks with empty space below, I had to search through a million to find one that didn't require so much depth for the tension screw. It works great after finding this one. It's easy to install, but will still hold a large clunky headset. The photos have accurate measurements.
👤There are three people working from home, one of them is a gaming son. I'm running out of places to put my headsets, my son has a gaming headset, and I've got my headset for Teams. This particular hook is unique for a couple of reasons. I like the metal construction. It blends in with any black furniture or decor. If it happens to be in a high pass area of your desk or table, the folding design will allow you to get it out of the way. The ability to adjust the orientation from a vertical to horizontal one was a feature that made this a definite purchase. My desk is made of wood and metal and has a lip on it. The standard vertical style brace clap design is useless because it is short of the height of the table. I can't use boom stands with this table because of the other accessories I have. The only thing I had to do was remove the two allen screws and attach them to the leg of the table. It is now a permanent fixture. A huge problem was solved when I reached for my headset. I bought two of them for work and one for home. A great buy.
👤I always remain objective and honest when reviewing products. I always review with information that I feel others would like to know about the product, as I always assume what I'm writing will affect the purchase. I try to go beyond surface characteristics and input into quality, value and application. I will always end the review with an answer as to whether or not I would purchase the item again, which I believe is the most critical question pertaining to the item. Let me know if you want me to review your items. I was looking for a cheap hanging solution for my headphones and this product was the only one I could say anything about. I usually have my headphones on, but it can flip up when not in use. The screw base makes it easy to use for different sizes of desks. I'll probably buy another one for my daughter. It's a very handy device, serves the purpose well, and is cheap, but sturdy. You won't be disappointed.
If you care about compatibility, style and quality, this gaming accessories is the best choice. It's a great gift for your kids, gaming friends, boyfriends, etc. All in one design, under-desk headphones stand, 3usb charging hub and 4A-20W. Can hold two sets of headphones and keep your headphones out of sight. 3 Port SmartUSB Charger:Detects your device automatically to deliver its fastest possible charge speed up to 2.4 Amps per port or 4 Amps overall. TheSafe Guard is a fire-resistant and hardened plastic outer shell that is built-in premium circuitry and a chip that ensures device safety. Quality Gourmet provides a 90-Day Money Back Guarantee and a 24 month warranty that will ensure you a hassle-free purchasing experience. If there is a quality issue with this headphone rack, please contact them.
👤Great idea and concept. Didn't find anything else like this. The included wire management tie down clips were helpful. The wire holding cutouts on the parts are very nice. I like the monocolor of the grey outputs that came with mine. It takes a bit to take off with 3M VHB tape. The power line runs below the unit, which would make wire management easier. You can see what I mean by looking at my photo. If the cable ran through the back, it would have been a cleaner look. The power cord is a tad short, as many other users pointed out. It fit my setup well, but I wish it was longer. Great product, all in all. This is definitely an improvement over the previous ones, as it was from a regular under the desk headphones. Would it be interesting if they had a version of this that was not powered so you could connect it to a computer? It's helpful for people with headphones that have ausb type.
👤This is a review for something. Skip the other headphones. You will get more bang for your buck with this. Way better than those overpriced headphones. Get this. You get a better quality hanger and also a charging port for your devices. The price is almost unbelievable when you consider that you don't get cable channels or a portable charging device. What I like. There are two headphone hangers. There is a There are cable channels for earphones. There are threeusb DC chargers! There is a Double-sided or a more permanent screw mounting is what you should use. Includes hooks for tidier desks. The packaging is gorgeous. There is a good separation between the headphones. Inexpensive. Not braided cable is what I don't like. There is a power cable. The power cable is at the bottom. The package has a headphone hanger with pre-applied double-sided tape. Extra double-sided foam tape. There are two screws. Three cable hooks are under the desk. There are printed materials. If you decide to mount using that option, you might need to change the double sided tape on your desk. I highly recommend this product, it has 5 stars out of 5. Hit the comments. This review is for something.
👤It works well. Even when I have my beats headphones, gaming headphones, and watch on it, it's very sturdy. There is a I don't have to worry about how fast it charges, it will work if I use 3 ports at the same time. It will charge on and off at will. I usually charge my devices and watch them at the same time. I'm not sure if it's because of the ipad pro or not.
👤One of theusb ports decided to self destruct. Quality is questionable. Contacting MFG to find out how customer support is. Good quality. The mounting screw-hole would have been blocked if the power cable had been oriented facing backward. A power cable would have solved this issue. The loop is not very noticeable when you mount it back from the desk. The product functions as intended. I wish this had at least one plug.
The extra long arm fits most headphones. You can store your headphones with a wide headband. The raised part is designed to hold your headphones. No worry about falling off. This headset stand holder is made from high quality metal which makes it sturdy. It can support up to 11lb. Hang your headphones and other heavy gadgets. The pole is part of the grooves design for the flat surface with thickness between 2mm to 38mm. The rubber pad is attached to the end of the clip. It's also suitable for cabinets, shelves, and glass flat surfaces. It is easy to attach and use the headphone holder. You can put it wherever you want. The knobs can be twisted and fixed. No need to drill holes or apply glue. It's easy to install, remove or move. You will get a headphone holder. 60-day money back is promised. They are confident in their products. Please contact them if you have any questions.
👤I would recommend an item called "APPHOME Headphone Hook Desk, Headphones Stand Under Table foldable Headset holder Clamp Hanger Mount, Built in cable clip organizer for PC gaming, Office, backpack bag purse hanging" on Amazon, rather than this. For the most part, my original review still stands. There is a The part that isn't the circular clamp has slid off over the years because the silicone/rubber glue hasn't held up on the top. The original review is still there. It's the same thing. It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's the same thing. It's the same thing. It's not a good thing This is a piece of metal and a bolt. It's strong. Enough said. I'll give reasons why you should get this instead of the BrainWavz Hengja before I give the cons out of the way. - The bit is not curved. Not a big deal. It would be nice. I would take off a tenth of a star for this. The threads are not very smooth. A decade ago, I got a small amount of silicone grease for three dollars. I'd take another tenth of a star for this. The other one is made of rubber. I can't tell if the padding on the ends is old stock or not. If there is no rubber on the ends, return. This reduces the amount of force needed to keep the surface immobile and prevents damage to the surface. The Henja requires you to Torque the sucker down to get it to stay put. With this one, you barely have continued to tighten. - It will fit onto any surface from 0 to 38mm. The Henja has a minimum surface thickness of 21mm before you run out of thread, and anything thinner than that. You need to use tools. This is not the case. - There is no need for a wrench or screw driver with this thumbscrew. - The lip keeps things from falling off. There is a The product is worth it despite the design being almost perfect. It would be perfect if you made the hanger a bit wider, gave it a curve, and made the threads higher quality.
👤I ordered it twice. It is very sturdy and a thick metal and all components seem to last the rest of time. The screw in mechanism is where failure in similar products might occur, but this one is heavy duty and doesn't come loose naturally. I think the valley in the grip pad has an effect on stopping rotation, if you look at one of the photos I posted. I initially thought the bolt was too simplistic, but it turned out to be a really effective piece with zero points of failure, because it was a thick Billy threaded through the plate with a metal head on one side and a free-spinning holder for the grip. I was wondering if this thing would rattle in a loud bass environment, but it definitely doesn't. I have moved these things around a few times now and they work just as well each time I use them. There is a I will get more of these things if I get more headphones. Don't use cheap plastic alternatives.
The best choice is the headphone hooks. There are double methods to install all gadgets. The best way to cut down oncluttering is with a headphone stand. The model has a dual headphone holder that can be turned into a rotating sphere. The design makes the clip easy to use and looks great when holding your headphones. All kinds of wired and wireless headphones can be held under your desk with the stick-on 3M VHB. Non-Abrasive aluminum cover is compatibility. It is easy to remove the screw clamp. It is a strong headphone Hook because it can hold PC gaming headsets without bending or breaking. Installation with screws and a rotating ball plunger can be adjusted to fit under tables. padding should be on the arm or hook that will support your headphones. Easy to install, do it yourself structure. Maybe you don't have any ideas to create a proper headphone stands, but the headband is compatible with all aluminum alloy stands. If you take a review from their store, you can start packing up your items in a well-organized manner. Can Mount Anywhere is a versatile design. Those who ran out of space or are simply looking for pure efficiency can use the economic solution of Gamital Design. One of the best headphones is simple, modern and economical. If you have too much stuff on your desk and no room to spare, you can just put your headphones in the drawer and forget about it. There is a lifetime warranty for quality issues. They're confident in their design and quality and their goal is to improve office efficiency with gamital fitting. The store provides 7 hours. There is a local technical support and satisfaction guarantee. Buy it. Enjoy a high-quality product.
👤Work threw out some motorized sit-stand desk frames so I was able to build my wife a desk that was a surface. I bought a butcher block from the hardware store, mounted it, and bought accessories to make it more functional. It would be nice to be able to hang headphones under the desk and use a magnetic charging cable to keep them charged when not in use. There is a The stand is very functional and looks good with the heavy aluminum. I didn't bother with the glue because it wouldn't work unless the desk is very smooth and won't adhere long with frequent use.
👤I put my headset on the underside of my desk in order to clear some space up top, and then I put my headphones on the underside of my desk to have better sound and ear pads. It's easy to put a couple of screws in if that fails.
👤The 3m sticks well. It doesn't budge. Don't worry, watch the video. The headphone hanger is able to change direction with no issues and this is what distinguishes them from the other offerings. There is a Every single detail is taken care of.
👤It works well and gets the job done. I wanted a small mount that didn't take up a lot of space, and this one was great. I only used the backing, not the screws, and the ashesion level is still great, even though I only used the backing. It feels more sturdy because it is metal as well. I am happy with my purchase.
👤I was really annoyed that the shipping took longer than it had said. I gave it to my dude for his office and he uses it a lot.
👤My Steelseries 9x headset has a great hook. The glue on the other hand is terrible. After a week away, it came back to them on the floor. For whatever is worth.
👤The construction feels solid and the parts move very smoothly. I like that you can change the hook and out locks at 90 degrees. I can't say how good the backing is because I screwed it in.
👤The stick hanger is made of high quality aluminum. The material is tough. The anchoring 3M sticky is easy to bear. It's a good design for me, it offers two ways to mount under the desk, slide to another side and use screws. It's really a simple, funcitonal, extremely effective space saver hanger.
You will get a headphone holder. 60-day money back is promised. They are confident in their products. Please contact them if you have any questions. The foldable headphone is called a Hanger. It can be lain flat on the wall when it is not in use, folding, or expanding. The built-in cable loop is designed to prevent your headset's cable from dragging on the ground or getting caught between your desk chair's legs. Universal Headphone Stand Under Desk is a universal stand that can fit on most desks. It is easy to remove and re-attach the screw clamp. Soft rubber pads located on both ends of your desk or table protect it from damage. Premium quality is made of aluminum metal. 60 days of money back is included in the Headset Holder Warranty.
👤I purchased the upgrade version without the cable organizers and the new upgrade with the cable organizers. Both versions had the same features, including the solid aluminum screw knob and the notch on the screw clamp pad for attaching to round desk legs. They arrived at the same time, and the upgrade version matched the catalog picture. The Newest upgrade did not. There are significant differences between the pictures of what arrived and the picture of the Amazon catalog. There is no notch for mounting to round desk legs, and the screw clamp pad is not completely flat. The cable organizers are on the opposite side of the hanging arm. The quality of the product was lowered from theUpgrade version in the changes #1 and #2. I will return to Amazon for a full refund. There is still a 1-star review. The seller reached out to me shortly after my initial product review to let me know the product I received was the older version which was replaced in August with the newer version. If I were to order it again from Amazon, they would give me a coupon that would let me get one for free. I took them up on their offer, but I was surprised to see that the older version of the product that had been re-released by Amazon was still there. The seller doesn't control what version of the product remains in Amazon inventory, but this is now November. You would think they would have exhausted their older version of the product by now. I purchased the exact same version of this product from another seller and they were able to deliver the newer upgrade version. 1-STAR to Amazon for pushing old inventory and 1-STAR to the seller for updating their product description, but then continuing to sell the old version through Amazon under a new product listing which does not match reality. I wonder how many other people who thought they were buying the newer version of the Prime Day product got shipped the older version. I was ready to write-off Apphome Direct forever after my second disappointing delivery of the older version of the product. Apphome Customer Service is persistent in ensuring that their customers are completely satisfied with the purchase experience as well as the products they sell. They apologized for the incorrect product being shipped and asked what they could do to make it right, after they had already fixed the issue. The only way for that to happen is for Apphonme Direct to send me the correct version of the product at no cost, and they will refund the price of the product if I purchase it a third time. "Third times the charm" is what they say, and it was in this instance! The newer version of the product was shown on the product page after I received the product. It's a good sign! I have dealt with a number of sellers on Amazon over product issues, but Apphome Direct Customer Service went above and beyond to make sure I was completely satisfied after my previous two bad purchase experiences. Apphome Direct is deserving of praise. I am happy to make more purchases from them again after having a positive experience with them.
Universal design - hold your headphones and controllers in one place. It applies to a bag, umbrella, backpacks, keys, cables, etc. To accommodate accessories, please adjust the little arms of the hanger. 1 Hanger Holds 2 The dual arms of the headphone hanger can hold two headsets at the same time, keeping your headphones organized and ready to use. It is compatible with all headphones with their headbands within 1.37inch. The headset hanger is widely used under the glass, wooden or metal desk, table, shelf, cabinet in the home, office, dorm, cyber cafe and other scenarios. It could also be used to hang other items, such as purses, shopping bags, umbrellas, etc. A neater environment will be created with this hook. The design is user-friendly. The mount is lightweight and sturdy with premium aluminum, so that it won't break even if you hold the heaviest headphones. The raised tips on your headsets prevent them from falling. When you need to replace something in unforeseen circumstances, you will be able to do it with extra glue. Two mounting methods. The headset stand can be mounted without causing damage to the desktop surface, and it can hold up to 4.4 lbs. With screws, the headset hook could be installed for more firmness. Choose the installation method that is right for you. You can get a refund within 60 days or a free replacement within 12 months if you have non-human reasons. You can contact them via Amazon Messages if you have any questions.
👤This double-hook headphones holder does exactly what it is supposed to do. It holds two pairs of headphones side by side. The double-sided hook makes it easy to store and remove your headphones from underneath a desk or shelf. I gave the Adhesion category a 4-star rating, since I have only been using it for a week and it has a tight seal. I am confident that it will be long- lasting since it is made with a 3M adhesive and includes a replacement strip. There is a It is recommended that you allow 24 hours for the glue to seal completely before hanging your headphones. This is part of the instructions. I purchased this one because of its design quality and price, and I am very satisfied. I hope this insight helps you make a buying decision, as I am not an employee of this seller or a representative of this industry. All the best!
👤I couldn't find a way to hang the heat gun on the side of my crafting table after I bought it. Many of the headphone hangers are plastic or foam, and I thought they would be perfect. This one is made of metal, not plastic or foam. It's the perfect size to fit under the edge of my crafting table for my heat gun. The gun is held with the nozzle up so that the heat won't affect the motor. There is a This comes with a glue to stick it on, but also a couple of screws to put it in my table. This isn't designed for this purpose, but it fills the bill perfectly.
👤I wanted to hang my headphones under my desk. The desk has a smooth bottom that should accept the included glue, but I decided to use the included screws just in case. It was difficult to install the screws due to the design of the headphone hanger. Since a screwdriver cannot be driven at a straight angle, the screws need to be put in at an angle. I predrilled the holes for the screws, but since the screw goes in at an angle, it sheared the screw off. I was disappointed that the screw sheared so easily, and the design made it nearly impossible to install the screws, because I was using a hand screwdriver to drive the screw. It is a good material and slightly smaller than I thought.
👤I like that it's double sided and works well for my purposes. It will be too narrow for some headphones. I found the measurement listed to be accurate. I only use this to store one pair of headphones and the other hook for hanging cables that aren't in use. I would like to secure it with the screws provided, but unfortunately the way it's designed makes it difficult to approach from an angle. I'm not sure how you could get the screw all the way in. You would need to drill a hole before you install the glue, and poke holes through it, so that's something to keep in mind. Unless you plan to put something heavier on this, it's not necessary. I wouldn't try to use the screws for something like a bag hook because they are small and mount from two corners.
Headphone holder under desk magnet products from Oriolus. In this article about headphone holder under desk magnet you can see why people choose the product. Humancentric and Kafri are also good brands to look for when you are finding headphone holder under desk magnet.
Oriolus, Humancentric and Kafri are some of the best brands that chosen by people for headphone holder under desk magnet. Find the detail in this article. Yocice, Eurpmask Choose The Color Of Europe and Apphome are also brands that their products are worth to check.