Best Headphone Holder Under Desk Metal

Desk 1 Feb 2023 10+ Comments Open

1. Headphone Headphones Adjustable Universal EURPMASK

Headphone Headphones Adjustable Universal EURPMASK

Customer service is great. Give it a try. You can return it within a month if you don't like it. They will send you a new one if it is faulty within a year. Universal under design allows for a near universal fit on most desks by attaching a thin, narrow, and thick piece of metal to them. It is easy to remove the Spring Clamp. The audible headphone arm swings underneath your desk for discreet and non-intrusive storage and swings back out for easy access. BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Soft rubber pads are located on both ends to protect your desk or table from damage. The under desk mount is convenient for storing. Easy installation of a springed C Clamp.

Brand: Eurpmask Choose The Color Of Europe

👤We needed a better solution to keep our headphones from breaking and this was our answer, it's very sturdy and feels very well made, it's even better if you have an xbox one controller, it's even more perfect. My purse is probably around 10 lbs. I'll probably order more for myself and gifts in the future. Highly recommended.

👤The hook portion can bend if you put a lot of weight on it and it is very cheap. There is a The head doesn't lock up. The clip is not tight enough to prevent desk steps that are less than a quarter of an inch from moving. You can get a Brainwavz Hengja Hanger for the same price that has better construction quality. I would've gotten a second one, but I got this instead when the page from my old order suddenly said out of stock and started directly to a screen protectors. I wouldn't buy it again. Cheap, poor construction, plastic bends, top sticks up a lot. A bad product.

👤It's easy to put my headphones out of the way. I didn't want one where you have to use glue or screws. You don't need a heavy duty one if you have light headphones. The mount has a sufficient amount of space. The desk is protected by the padded clamps. The mount has a hook so you don't lose your headphones. You can choose which direction you want to hang your headphones. The cord clip is nice, but it's stiff, so I just wrap it around the hook and grab my headphones when I need them.

👤This thing is great. I was embarrassed that I didn't think of getting this a long time ago, but I did not know it existed. Maybe it didn't. I am a recording artist and I use expensive headphones. They were not taken very well care of in the past, as they would flop around on various surfaces. The device is easy to set up and I like that the hook can be changed to hang things or not. I think it's a good deal so that I can get another one for my other cans. I recommend this to anyone who wants to protect their investment.

👤It was easy to put in place. I got this because I was sick of my headphones laying in random places. The hook is neatly underneath. The picture doesn't show it, but there is a small loop for a cord to go through so I leave my charging chord handing from there so all my cords are close together and easy to manage. You can put the headphones on the hook and swing them out of the way under your desk. I put one on the side table for my headphones.

👤I didn't expect to write a review on this. I thought I knew what I was getting. This is a cheap, easy to scratch plastic. The cable clip would be better not there. The only. The mechanism for twisting the hook into different positions is a nice thing about this. You only need to rotation from 90 degrees and 180 degrees. The hook is pretty loose and you can position it anywhere from 0 to 180. I would have given it a pass, but the junk quality means it should be a lot cheaper than other METAL items. It would be a good deal at five bucks, since I got it for twelve ninety nine. If you don't know better, maybe eight. No way in over ten. I'll probably keep it because it's not worth it with the Pandemic. It will have to do.

2. 6amLifestyle Headphone Organizer Universal Headphones

6amLifestyle Headphone Organizer Universal Headphones

Keep your headset's cable in place and prevent it from dragging on the ground, that's what the upgraded version of the cable holder says. You can keep your charging cables in a safe place. Keep your desk clean. Practical and convenient! It's great for home, office, classroom. Save space with the foldable arm. The arm can be folded up when not in use. When folded, it is smaller than your palm. Save space! The rubber strip on the raised arm keeps it folded. There are no worries about the adhesion. The rubber pads are attached to the ends of the clips to protect the desk surface from scratches. The desk can be mounted within 50mm. Also fit cabinets, shelfs, and glass flat surfaces. Excellent quality, no damage to the leather. The rubber pad on the headphone hook is arched. The holder has a 3-inch arm and is ideal for both wired and wireless headphones. It's also suitable for backpack, purse, umbrellas and so on. The headset stand is made from metal and can support up to 11 lbs. 60-day money back, 12-month warranty. They are confident in their products. Please contact them if you have any questions.

Brand: 6amlifestyle

👤You think you don't need this product until you buy it. I don't like having to put my headphones in a container every time I use them, and I don't like having to take them out. I didn't like leaving my headphones out to collect dust and suck up space inefficiently. I decided to give this product a try. I love it. It's simple, elegant and very versatile. I was worried that it wouldn't fit on the front side of my desk. It was easy to fit to the legs of my table because you can adjust the hook's direction. It will still collect some dust, but it will be less than under something. This product is great for anyone looking for storage items.

👤I didn't want a stand on top of the desk as there was not enough room for one without my desktop getting crowded. I was looking for a hangar that I could hang on the inside of the frame, so that it wouldn't stick out to pedestrians. There is a This hangar is perfect. It seems to be well made and sturdy, has pads so as not to damage the desk frame, and it has more than enough adjustability to accommodate thicker desk frames/tops. I like the clips to hold my headphones, it's nice to be able to roll it up and stick it in without having to worry about the wire getting loose. There is a My cable-managed PC station has a new addition.

👤I bought a new headset for my computer. I picked it up. The rubber coating on the ledge helps keep the headband from sliding around. It has a lip at the end that helps to keep your headset from sliding off of the end. I had a similar stand for my headset, but it didn't have either of these features. I decided to replace the stand for my console headset after I thoroughly enjoyed the new one. I like that the stand can be folded up when not in use. I would highly recommend this stand if you were thinking about getting it.

👤I attached this to the leg of the table that I use for my computer desk to free up space for my headphones. I like the fact that the mount can be turned so that it can be mounted vertically or horizontally. The screws/screw holes/allen wrench are not up to snuff. The allen wrench takes a little work to get into the screw heads, and the screw holes seem to be off-level. The screws are not in a straight line regardless of orientation. It is very odd. I am able to change the orientation of the mount without a problem, and once mounted it is not coming off the table's leg until I remove it. I am very satisfied that it mounts firmly. It's probably too much for the headphones I am using, but that's not my main concern. I'm happy that I can keep my headphones plugged into my computer and have them tucked away, so I can use them whenever I want.

3. Headphone APPHOME Rotating Universal Headphones

Headphone APPHOME Rotating Universal Headphones

The dual Headphones Hanger under the desk can hold two headphones at the same time, with a headband width within 2.1inch. The rotating neck of the headphone arm allows it to be used as a storage option for heavy headphones. For a near universal fit on most desks, the Clamp can be as narrow as 5mm and as thick as 50mm. It is easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or table from damage. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.

Brand: Apphome

👤I transitioned from a regular desk to a standing desk and I love it! There is a I bought the Anti Fatigue Bar to stand on so I can work on a stand up desk. I bought a dual stand under my desk so I can hang my headphones when not in use. It's very easy to install on a desk and it's very sturdy, but I like that it rotates so I can tuck it inside the desk rather than have it stick out. Absolutely nothing! There is a 5 out of 5 stars! If you need to hang stuff for storage, such as headphones, book bag, and anti fatigue bar, I highly recommend this. It's strong enough to hold anything. There is a Hope this was useful. If it was, please click on the button below. Thank you!

👤The design is subtle and easy to install, and thepadded hooks can be adjusted to your desk. There is a If you have a thicker desk, you won't have much clearance for your headphones. This was used for our headset. The hooks aren't adjusted to go lower than the C clamp, so it barely fits under the desk. I thought it would be bigger and longer because of the reviews. Would not be possible to fit 4 quality headphones on here. I thought my headphones wouldn't be a problem at my desk. It works. It works and is cheap, but not my favorite for the purpose I bought it for.

👤Excellent headphone holder! I use this to hang my headphones above my headphones amplifier at the back of my desk. There is a The steel is very strong. It is very easy to install. I like the way the hanger rotates. I will probably get another pair of headphones. This is the best I have found before. I bought another one to see which one I liked the best. The other is made with plastic and takes up more space than the other. I'm sending it back. This is the keeper!

👤I use it to hold two briefcases. The Bag of Holding is from ThinkGeek and the large briefcase is from Saddleback Leather. Hanging them from the device keeps them out of the way of the robot. It looks better than any other method of storage I have tried.

👤I wanted to buy a single hook for my headset. I found a dual headphone stand and extra wide brackets. I don't have enough room on my desk to hang this hook. I need something to hang from the shelf. It is about 2 inches thick. The hook is perfect on the edge. I use the extra long arm to throw my headset on there. I know where to find my headsets.

👤I was worried that this might not hold up because my desk has a metal tube on the bottom side, and I needed something that was strong enough to hold two pairs of headphones. I've had no issues. The item I received is not the same as the one pictured. There are two small tunnels on the plane of the headphone-holding areas near the edges that you can cut out if you want to get a cable grip. It's too wide to hold regular 3.5mm cords, so maybe it would hold woven cords?

4. Headphone 6amLifestyle Earphone Universal Headsets

Headphone 6amLifestyle Earphone Universal Headsets

You can store two sets of headphones under the desk. It's ideal for all kinds of headphones, such as wired headphones, gaming headphones, and Bose, and it has long arms. The raised part is designed to hold your headphones. Solid construction is made from metal. Strong anddurable. The supports hold two sets of headphones at the same time. Max. Load up to 11 lbs. It's suitable for hanging headphones. The rubber pads protect your desk surface from scratches. The headset is suitable for all desks. Glass flat surfaces are also used for suit cabinets. It is easy to install and remove with a matched screwdriver. The screw clamp can be easily tightened. Just use it wherever you please. The ultimate person who is perfect. The factory made this headphone holder. The dual headphone hangers have been tested. Money back and a 12-month warranty are promised. If there is a problem with the product, please contact them via Amazon message.

Brand: 6amlifestyle

👤I wanted this to make it easy to switch between headphones. I bought my desk from Walmart a decade ago. This won't adhere to anything but the trim under the fonts, because there's stupid trim and accents everywhere but on the hutch, and that's not tall enough to hang headphones. It is holding a pair of Koss KPH30i. It doesn't seem to fit anything bigger than that. I guess that's ok. You should know that they come with twice as many bolts as you need, because the lip of the piece that holds onto the desk overhangs the screw holes, and you cannot get the bolts seated properly. It was slightly out of tolerance for mine. I had to Torque the crap out of them to get them tight. I said in the headline that they are ok for people using small headphones and a plank for a desk. These won't fly if you have any sort of trim, accents or sides to your desk.

👤The product replaced two single-headphone hangars. Assembly is a big problem. Sheesh. The screws provided are too small for the holes drilled into the main assembly. You have to use a lot of force to get the screws in. It's difficult to get the screws in straight because you are tapping into new metal. The picture on the box is wrong. The section that the headphones hang on goes on top of the part that anchors to the table top. Why would the screw holes have to be cut to accept screw heads? The end product is a lot of work. You can't see the screw heads when it's under the table top. Maddening. Inexplicable. This product is sturdy and functional after all that work. Better quality would be appreciated.

👤This was smaller than I anticipated so it works out better to save space in my work area. The quality of the hangar is similar to other well received products, but it is slightly smaller, but I don't feel like this is a bad thing since it feels pretty sturdy once it is mounted. The picture for the listing shows you exactly how it should be put together, even though there wasn't an instruction manual. If you want to use the knob to secure it to a desk, you should be able to because it is hand tightened and the end is rubber so you don't have to worry about it leaving marks on your furniture. You can hang double the headphones by using one of the hooks for headphones and the other for wrapping the cable around. There is a The only things I would change to make it better is to make the bar wider and arched, and to remove the flaps on the end. I think the design would be better without the ends being tipped because it would make it much easier to take and I don't have any issues with a headphone ever moving. Product seems good and will likely last for a while.

5. APPHOME Foldable Headphone Organizer Universal

APPHOME Foldable Headphone Organizer Universal

You will get a headphone holder. 60-day money back is promised. They are confident in their products. Please contact them if you have any questions. The foldable headphone is called a Hanger. It can be lain flat on the wall when it is not in use, folding, or expanding. The built-in cable loop is designed to prevent your headset's cable from dragging on the ground or getting caught between your desk chair's legs. Universal Headphone Stand Under Desk is a universal stand that can fit on most desks. It is easy to remove and re-attach the screw clamp. Soft rubber pads located on both ends of your desk or table protect it from damage. Premium quality is made of aluminum metal. 60 days of money back is included in the Headset Holder Warranty.

Brand: Apphome

👤I purchased the upgrade version without the cable organizers and the new upgrade with the cable organizers. Both versions had the same features, including the solid aluminum screw knob and the notch on the screw clamp pad for attaching to round desk legs. They arrived at the same time, and the upgrade version matched the catalog picture. The Newest upgrade did not. There are significant differences between the pictures of what arrived and the picture of the Amazon catalog. There is no notch for mounting to round desk legs, and the screw clamp pad is not completely flat. The cable organizers are on the opposite side of the hanging arm. The quality of the product was lowered from theUpgrade version in the changes #1 and #2. I will return to Amazon for a full refund. There is still a 1-star review. The seller reached out to me shortly after my initial product review to let me know the product I received was the older version which was replaced in August with the newer version. If I were to order it again from Amazon, they would give me a coupon that would let me get one for free. I took them up on their offer, but I was surprised to see that the older version of the product that had been re-released by Amazon was still there. The seller doesn't control what version of the product remains in Amazon inventory, but this is now November. You would think they would have exhausted their older version of the product by now. I purchased the exact same version of this product from another seller and they were able to deliver the newer upgrade version. 1-STAR to Amazon for pushing old inventory and 1-STAR to the seller for updating their product description, but then continuing to sell the old version through Amazon under a new product listing which does not match reality. I wonder how many other people who thought they were buying the newer version of the Prime Day product got shipped the older version. I was ready to write-off Apphome Direct forever after my second disappointing delivery of the older version of the product. Apphome Customer Service is persistent in ensuring that their customers are completely satisfied with the purchase experience as well as the products they sell. They apologized for the incorrect product being shipped and asked what they could do to make it right, after they had already fixed the issue. The only way for that to happen is for Apphonme Direct to send me the correct version of the product at no cost, and they will refund the price of the product if I purchase it a third time. "Third times the charm" is what they say, and it was in this instance! The newer version of the product was shown on the product page after I received the product. It's a good sign! I have dealt with a number of sellers on Amazon over product issues, but Apphome Direct Customer Service went above and beyond to make sure I was completely satisfied after my previous two bad purchase experiences. Apphome Direct is deserving of praise. I am happy to make more purchases from them again after having a positive experience with them.

6. Headphone Link Dream Organizer Headphones

Headphone Link Dream Organizer Headphones

The Link Dream is a dual headphone and cable clip organized stand that can hold messy headphones and support two headphones at the same time. The headset holder underside desk can be mounted with screws or 3M VHB tape. This small headphone hook with cable clip is small enough to fit in any desktop space, giving you more space and keeping your desk organized. It's compatible with all wired and wireless headphones. The hanger could be used to hold other things. Link Dream can be installed almost anywhere, it has a 3 year warranty. If you have any suggestions, please do not hesitate to contact them.

Brand: Link Dream

👤Everything as promised. The aluminum material works. Comes with extra sticky pad. A wipe to clean your surface before sticking to the device. There is an extra screw. How respectful. There is a If you plan to use it on a surface, you should get your own screws because the included ones don't work. Yeah... The head of the screw falls through the hole. I'm not sure how they let that one get by. Every screw is the same. I had screws for door hinges that worked well. smh... It was so close to perfect. As long as you weren't planning on relying on the included screws, it's ok.

👤This is a piece of aluminum that is shaped to hold headphones. It does well in this task so far. My only question is if there are 2 screw holes where you stick it to the desk or shelf. I'm not an expert, but if you don't have a small right angle screwdriver, you're not going to be able to attach it with screws. The design would have been better if there were no holes. I'm happy that it's holding for the time being.

👤A very strong hangar. It's small for my high end headphones, but can fit one on them without the other hanging off the edge. They fastened it tightly to the bottom of the desk and have no worries about it coming loose. I don't want to risk putting 2x $200+ headphones on just double sided tape, but I also don't want to risk dropping $400+ worth of headphones for 40 seconds. There is a Why 4 stars if you liked this so much? Again, too small. They would be perfect if they were 12 taller and wider. The build quality is great.

👤The screws the manufacturer provided were too small for the holes. I decided to screw the hanger to the underside of my desk because I didn't want to use the double sided tape. The screw heads were so small that they slipped through the holes. I had to dig around in my own collection of screws to find an appropriate size for this holder because there was no way I could use the supplied screws. There is a The holder is worth 5 stars, but I only give it 3 stars due to the incorrect screw size.

👤I initially bought this to hang my PS4 headset on the coffee table so that it wouldn't get in the way. I bought another one to keep my headset out of my desk. I'm going to buy another one so I can use it as a purse hanger instead of leaving my purse on the desk. This little tool is helping me organize my home.

👤I love getting things like this. It is simple, sturdy and does what it is supposed to do. The glue is strong. Once cured, this thing will not budge. Before you adhere it, make sure you set where you want it. I love the texture of aluminum. I don't use the little notch for the wire since I'm using wireless headphones, but it's nice to have it if I ever hang some on there

7. APPHOME Headphone Aluminum Accessories Headphones

APPHOME Headphone Aluminum Accessories Headphones

The CVC 8.0 noise-cancelling microphone is built into the headphones and brings a brand-new calling experience. You can feel the pleasure of a face-to-face conversation. The 2Pack Headphone Hanger can hold two sets of headphones at the same time. Home Office use of gaming accessories. It's made of aluminum and can hold small to large headphones without bending or breaking. Double methods to install hold under your desk surface with strong tape. If you want, you can mount with screws for extra strength and security. It's ideal for home, work, school or cyber café, and it's space-saving. It's compatible with all gaming headsets and headphones. It could be used to hold other things.

Brand: Apphome

👤I intended to mount it using screws. If heat/humidity isn't favorable in your situation, it can be problematic to use solely adhesive. You get an extra one if you have the unit already on the mount. I didn't want to go through the process of removing the glue. I had to peel off the backing to mount it, but it was so difficult that I had to remove part of the mount. It's not clear if that would jeopardize the attachment's strength. I would rather that they don't put the glue on the mount and just let you make your own decision. If you were to use screws with the glue on, the provide screws are too short to have much left inside the mounting surface, which could lead to a failure.

👤I mounted the headset holder to my work desk using the two small screws and the glue already attached to the holder. The holder is elegant in appearance, style and form. The grey color seemed to be compatible with my color scheme. I like that an additional strip is included if I want to relocate the holder, however I wonder if most people throw the additional strip away. I think it's a tough call, maybe most people throw away the two screws. I don't think the mount can be held to any surface with the help of the glue. I put the mount in one location, then realized my screws would need to go through a metal brace, and pulled the mount off the table in order to move it. The screws are difficult to fully tighten without stripping them because of the difficult angle between the base of the mount and the actual hooks, according to another buyer. I agree that I would have liked to have been able to screw the screws into the surface from a different angle, but I didn't have to. The screws should be slightly longer for thos angle. The small screws seem to be enough for the mount to remain attached to my table. While my headset is not heavy, I occasionally bumped the holder and it still held up.

👤The features that made me pick this particular hanger over competitors' product were the beautiful design, superb finish and the options of attachment. Usually, I prefer to mechanically attach hard goods whenever I can over attach them, especially hardware such as brackets, hangers to be surface mounted, and intended to carry a load of reasonable weight indefinitely. I chose this product because of the high performing 3M glue that I could use to place and hold the hanger, and also because I could pre-drill through the factory mounting holes before I screwed it in. It looked like a walk of an install. I used a conventional pistol drill with the smallest drill bit I could find. I had to drill my pilot holes at an angle because of the shallow space between the mounting plate and headset base. When I tried to screw in the smaller wood screws, I found it difficult to maintain the same degree of angle with the screws into the pre-drilled pilot holes. I will change my technique for install #2 so that I don't have the same situation again. The combination of high performance adhesive and two factory engineered mounting holes means that your hanger is going to be there forever and probably as sturdy as the day you installed it. The basic provisions make it easier for a change to be made. Quality engineering of a quality product for anyone who still appreciates quality hardware. Thanks! Drew.

8. Oriolus Headphone Hanger Headset Adjustable

Oriolus Headphone Hanger Headset Adjustable

You can hang the headset and extra cable on the front hook and the back hook is used to hang bags. The band of your headphones won't be damaged by soft PU leather. The jaws of the clamp can open wide, and the protective pad can be attached to a desk. It is easy to install and a good solution to keep your cans from getting scratched. Distinguishing: The package includes: Headphone hanger x 1, hex wrench x 1, and a second one. Devices and accessories are not included.

Brand: Oriolus

👤It's a nice idea, but I put my backpack on it and it lifts up from my desk. It needs to be able to hold onto the desk.

👤My desk is very narrow and I needed a long piece of furniture. This did the trick, but barely. It is sturdy even so.

👤It's poorly designed so it moves around a lot, so you can't really tighten it.

👤It is easy to install a stand that will keep headphones and wires off the desk.

👤I hang my purse under my desk at work. It's better than those small purse hangers.

👤The product was good, but shipping took forever.

👤Arrives as described. It's helpful to have my bag and headphones at my desk.

9. Aceyoon Under Headphone Stand Adjustable Installation Multifunctional

Aceyoon Under Headphone Stand Adjustable Installation Multifunctional

If there is a quality issue with this headphone rack, please do not purchase it. The under desk headphone mount is easy to install and use, the maximum thickness of the table is 50mm, no need for other tools, just according to the desk thickness to adjust and fix. It can be uninstall when you don't need it, and leave no trace on the desk. This metal headset stand under desk can hold up to 5 kilogram of weight, and can also carry handbags, umbrellas, clothes, etc., more widely. Silicone pad is non-slip and not easy to scratch your desk, which is perfect detail quality. The hook is more suited to your stuff. The universal earphone stand hook is made of high-quality aluminum alloy material, which is wear-resistant, stable and not easy to aging. The earphone brackets with a folding design are smaller than the palm and make your desk more clean.

Brand: Aceyoon

👤It is possible to remount it anywhere if you need it. You can mount it vertically with the Allen wrench and screws. It flips up so it is out of the way. One of the headphones has a thicker band and the other is thinner and it holds both. The cords have to be kept handy, so I bought this one. Works well.

👤The revision that was being shipped in Q2 2020 is a design I love. The wide space for a table or desk allows you to add this to many different places. There is a I found that the glue under the pad was leaking. The stuff is very sticky and hard to wash off, but it doesn't want to stay under the pad. I'm always worried about getting the gunk on my headband or on my fingers when I move the hanger.

👤I wish I'd known about them sooner. I bought two of them. One for my bt headphones and the other for my anual quest 2 I'm happy! It's easy to install. I like the flip design. The instructions are poorly written. I don't know what the set screws are for. One of the best purchases I've made in a while.

👤I don't usually review products, but this one was worthy of a review. I was looking for a replacement for the plastic table-top garbage that I had for holding headphones, but I found the one I was looking for. I ordered two and one came in and was silver, but I sent them back and got a second black one in two days so it was all right. This thing is amazing. It can be folded up when not in use. I like that it can be rotation if you want to. There is a The construction is strong. Period. If you try to pull it off, it will move if you tighten it down. It is perfect. I only had the first one for a couple of days, so I can get to know the product. Well. I don't know how this thing could change, it's built so well. If something goes wrong in the future, I will update this review, but for now, I am completely satisfied with this product.

👤Finding a place to put my bag that wasn't in anyone's way has been a problem for me. Not anymore! The solution is perfect. No tools are needed to install. I carry my bag with me so it weighs about 5 lbs. The hook is easy to hold. It's easy to find under my desk.

👤I initially searched for actual mic stand headphones, but found that most of the reviews were against them being too small and not compatible with most mic stands. I searched for an alternative and found these aceyoon under desk foldable universal metal headphone holder.

👤This has been a great addition to my desk. My headphones are protected because they are not vulnerable to being knocked off the table. The cable management is helpful. I know where my headphones are when I need to pull them on. There is a A solid accessory that is built well and not creating a hazard.

10. 6amLifestyle Headphones Headset Holder Headphone

6amLifestyle Headphones Headset Holder Headphone

It's simple and elegant, and makes your headphones well-displayed when not in use. Make your desk tidy by freeing up your space. The Silicone pad and aluminum headset stand are made of anti-scratch material. Two mounting methods with a strong Adhesive tape or 2 screws are easy to install and look good in any setting. Headphone hanger mounts can be used on a wide range of surfaces. There are under desks, tables, shelves, wall cabinets and shelving units. It's compatible with all kinds of headphones, such as wired headphones, wireless headphones, children headphones, gaming headphones, TV headphones and so on.

Brand: 6amlifestyle

👤I use this to hold an Arctis headset. It hangs in front of the tower because it is attached to a desk. I didn't use the glue. Pre-drilling holes into the desk is recommended if you are attaching with screws. I like the subtle shape, the slight grip of the silicone pad, and it could comfortably hold a headset larger or smaller than mine. There is a The flat plate on the top of the desk is something I would change. I would like to see an alternate model that was larger and more similar to the one on the desk. You install the two screws, then slide the mount on and pull it forward. If you put it from the front you risk it sliding off the screws. It's not a big deal. It's not an optimal design choice, I see why they made it that way. There is a I'd buy it again if I needed a similar setup.

👤The screws broke. Not my fault. There is a The design makes it difficult to get the screws into the desk. The screw tip fell off after the holes were set. It was so weak that it broke into metal powder. I show photos. I had to dig into the wood to get the screw out of my desk. I show normal screws for comparison. The screws are narrow to get the mount to work. I gave up trying to adjust my other screws after about 20 minutes because they were too large. I would use glue, velcro or glue and glue over the garbage mounting options they give you. There is a The rubber part covering the hook is of good quality. Good quality is probably the only thing that's good in the unit. The metal is painted so lightly that it will chip easily. I scratched one side before putting tape to cover it, like I screwed for 2 seconds. If you want to install screws, please put tape on the edges to avoid scratches, but you can use a Sharpie or paint markers to touch it up. I don't think the metal will break like the screws. They dress up to look nice. The reviews here are not critical of what you're actually getting. It would cost about 10 cents to make in China. It's a better design if you want an under the desk hook, not on the side of the desk. I would have returned it for the poor quality if it had cost more.

👤It was really solid. Glad they use 3m tape, it works better than most others. I attached it to 2 sides and it barely moves, so I can put a lot of force on it. I use padding around the band. It fits with what would be recommended. The desk is black. Make sure you clean the area before applying and if possible mount in a corner where you can take advantage of both mounts. When mounting, make sure you press down hard. Press down on the flat surface to make sure the mount is properly adhering to the headphones hook. Many people forget to do that with 3m tape.

11. Yocice Under Desk Headphone Aluminum Headphones

Yocice Under Desk Headphone Aluminum Headphones

There is a 2 year satisfaction guarantee forValuable gift for Christmas, Thanksgiving day, Easter, Birthday, Valentine's day and more. Hook can hold up to 10 pounds. The heaviest headphones weigh about one pound. 3M VHB tape is used to adhere the aluminum material and soft silicone pad. One headphone hanger with 3M VHB tape. mounting on computers, desk and wall is durable.

Brand: Yocice

👤The frame doesn't bend without some force applied to it. The color of the product is great, but it doesn't scratch easily, like some other products that will scratch and ruin the look. Installation is the easiest thing in the world, stick to the spot, good to go. There is a There are pros and cons. My circumstance doesn't allow me to use the provided screws to install the hook. I bought this product because it came with a sticky pad. I have headphones that are not much heavier than the ones I use. The sticky pad didn't stick for long. It may have started peeling away from where it was placed a week before. I thought it might have been a mistake, but it wasn't. It's a very simple fix, I just bought better double sided tape and I haven't had an issue with it after that. I had to go out of my way to make it better, so I had to dock it some stars. That may be useful information for some people. The tape was not very good, but I am happy with the rest of the product. There is a This style of hook is perfect and many prefer it over the above desk ones. If you are able to do that even better, the color doesn't chip away, and the material comes with screws if you are able to do that, I would recommend this product over others. If you plan on using it that way, you should install a better quality double sided tape.

👤I didn't expect the glue to bond to my desk to be welded on. I am either weak or it has its own pull that was reinforced using superglue. It's important to plan where it's going to stay.

👤I put this under my desk with the 3M double sided pads. It is small but works for my G930's. The material is very strong. There is a The best part is that they included small clips. I was able to run the charging cable cleanly underneath my desk. There is a Overall happy. It was a bad deal for the quality.

👤I stuck it too close to where my legs were, and it would occasionally hit me. It sticks very well if it does what it's supposed to. The HyperX Cloud II headset is in place.

👤I can't stand the amount of stuff on my desk. I did not want a headphone rack because it was at risk of being knocked over. The metal is heavy for its purpose and won't bend. The mounting tape did not work. I used the screws that came with it. It was kind of annoyed. I didn't want to put holes in my desk. Overall happy with it.

👤The purpose of it is to serve as a headphone hanger. It is made of aluminum and feels sturdy. The only reason I'm giving it two stars is because it's not as advertised. There are 4 holes in the hook. Two (2) are located in the center of the hook and two (2) are located towards the top of the hook, which has slots to allow sliding the hook onto screws. I don't care if it's not what I ordered, since it does its job and I don't see it under my desk.

Summary

What is the best product for headphone holder under desk metal?

Headphone holder under desk metal products from Eurpmask Choose The Color Of Europe. In this article about headphone holder under desk metal you can see why people choose the product. 6amlifestyle and Apphome are also good brands to look for when you are finding headphone holder under desk metal.

What are the best brands for headphone holder under desk metal?

Eurpmask Choose The Color Of Europe, 6amlifestyle and Apphome are some of the best brands that chosen by people for headphone holder under desk metal. Find the detail in this article. 6amlifestyle, Apphome and Link Dream are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com