The package weight was 5.15 lbs. Easy access to your headphones. The long curved support is made of a soft, non-abrasive Silicone cover with a sturdy internal frame. A multi-purpose hanger. It's great for hanging cables, earphones and other gadgets. The max total weight is 1 kilogram. Clean and organized space. Installation is virtually anywhere - on walls, cabinets, glass surfaces, monitors, desktop towers, etc. You should organize and tidy up your workspace. Convenient installation. It uses double-sided tape for strong, reliable adhesion. Clean surface well using provided wipes. Allow the holder to be used for 24 hours. It is not suitable for use on wet, greasy or dusty surfaces.
👤It worked well for a while. One day, I walked into my room and heard a noise. I was trying to figure out what fell, but realized it was my headset. I followed all the directions after having it for less than 3 months. I pressed the alcohol wipes against the sruface to make the surface clean. After hanging it up, I made sure to not use it for 24 hours. It still fell despite all that. They need a better stand. I'll probably buy something to keep it. It was unfortunate it didn't hold up. There is a Customer service contacted me saying my previous 2 star review was detrimental to their reviews. They gave a free replacement. If they think the 2nd will hold up, I'll change the review. I'm not going to change my review if the second product does the same thing as the first. They asked me to send the email back to them, after they lost the previous messages. I did. They responded with nothing relevant to what happened before. I'll take it down to just 1 star now that I know their customer support isn't helpful. This isn't worth the headaches if you buy it from someone else. There are two edits, the first one is called Edit 2. I bought my own double-sided tape and it seems to be holding up well, so it's 3 stars. Customer support is very determined to make sure I like their product. I didn't use the new one because I was expecting the same thing to happen. If you rely on the glue, then you should buy any other glue.
👤I bought this item on December 13th. The stand has begun to separate from the glue. I was expecting this accessory to last as long as I thought it would. I had thought I would get at least 6 months out of it, considering the brand of glue they chose. I always took care to place things on it gently. The back of the rubber/plastic hanger and the desk it is attached to have begun to separate from the glue that is attached to them. The stand was rated 5 out of 5 for its function and 2 out of 5 for its longevity. Customer service was 10/10.
👤I used to get different types of L-shaped things. I changed my mind after reading reviews about people getting dents in their headsets. There is a This thing is awesome. Stick to a wall and it will hold up a heavy, wireless, headset. I attached one to a desk as well. I picked up a set of two for a very competitive price and was happy to return for more, and they were even cheaper. I can't say for certain, but I can say that you get your money's worth. There is a If you feel like you have a heavy headset and need more support, you can get a double-sided mounting tape. There's enough here to support 20 lbs of weight, and 3M makes the absolute best. The back is large enough to double the amount of tape holding up whatever you're trying to hang on the rounded mount. It's cheap for the amount you get.
The new bee stand is compatible with all sizes of headphones. The aluminum headset stand and rubber foundation are sturdy. The desk should be dust free and flat when you place the headset holder on it. This wireless headset stand is great for home, office, studio, bedroom or next to your TV. The gaming headset holder is small, light, and most important, it's a unique fashion style. Don't order it. If you have a problem or suggestion, please contact them, they will be more than happy to help.
👤The packaging was simple, sweet and complimentary. There is a It was easy to put together and works as advertised. I recommend this product if you want to display your headsets in a neat, compact way for the customer. I got two photos. This review was written again because of Amazon.
👤It's small and lightweight, but it's also very inexpensive, so for how little I paid for it, it does it's job well. There is a If you have large headphones or a cat that walks across your desk, there is a chance that your phone will tip over. There is a There is an edit. The foam on the band of my husband's headphones don't go away because of the stand pressing into it, and it has been used for about 6 months. It doesn't change the comfort of the headphones, but it makes them look worse. If you have nice headphones that you want to keep pristine, I recommend spending a little more for a curved stand because I use one for my headphones and do not have any indents. There is a If you don't care, this is a great stand that is very easy to use.
👤I bought a lot of these for storing and displaying headphones. I was pleasantly surprised by how well made these are. The wide and flexible piece on top of the headphone rests is made of TPU, which means that nothing will get scratched, and the top part of the rests is made of rubber. Some headphones have cheap foam pads up top so resting them on a thin pole or peg will usually damage them. It's not an issue with this stand. It's one of the cheapest ones. The base, post, and top are made of plastic with rubber pads. I know how good these are, so I can't imagine spending more.
👤I bought this to keep the headphones on my desk from getting thrown around. This device is very strong. There is a The unit is light and stable, even though it wouldn't stand up with headphones on. The base and stand feel like plastic and metal, respectively. The rubber top gives the headphones a good grip. There is a I am very pleased with this item. I have purchased 2 more of these.
👤There is no quality in construction. I got an $8 dollar stand after paying $8. There is a The stand can't support heavy headphones or have enough clearance for cable without causing stress to headphones. You should buy a stand that is worthy of your headphones. Is that true? The construction is cheap. The unit is assembled. The plastic that contacts the headphones bends easily. The plastic piece that is supposed to cradle the band is only three quarters of an inch in width. The stand has no width and makes an indent on the headphones. It will lead to pain. There is a The stand is too small for my headphones. I don't want my headphones to be hammed by the pressure on the cord and port. There is a Buying something else and returning.
It can be hung on a back bag with a carabiner. UGREEN is a perfect choice to store and organize Airpods, Bose Beats or Sony wireless earphones, as well as other accessories. There are charging cords and gadgets. The soft inner liner and shockproof and water- resistant hard shell offer multi protection, preventing your headphones or small gadgets from accidental drops and bumps. Good protection for your cables, ear buds, and important gadgets can be found in the mesh pocket. This small case pouch is light-weight and portable, and can be put into your pocket for traveling. The earbud holder case is portable and easy to carry. This wired earbuds case can accommodate earphones, charging cables, and data cables at the same time, which can avoid wire entanglement, and effectively organize and protect your Airpods and daily electronics.
👤The case is larger than I thought, so I won't be using it much, but it seems like it's crush resistant. I don't know if the exterior coating will be able to be flaked off during extended use, but I have had it happen in the past. Be aware of that. It won't fit in my jeans pocket, so I wouldn't use it for earbuds. It's quite large. It would be great for smaller electronics or larger fold-up style over the hear headphones.
👤I have a few pairs of earbuds that come with a lightweight pouch to keep them in for transport. I stopped using soft sacks and pouch in my travel bag after I damaged a couple of small headsets when the pouch couldn't provide proper protection. This is a great little case, it has plenty of space for earbuds and it protects them very well.
👤I have not seen any reviews about the Air Pod Pro case being 888-282-0465 which is a protective shell that can fit 888-282-0465. I was worried that the bag wasn't big enough. I ordered one for myself and one for my son, hoping it would fit. I am very happy that I did. It fits perfectly. If you ever dropped the Air Pod, it would come flying out of the charging case, so the protective shell is great. I needed something to carry them in that I could accidentally drop them and still be protected. I had to carry a bag for my ear hooks and rubber ear pieces. Everything is in a single bag. This is amazing. My son loves him too. The carabiner that came with the storage bag was not as good as the one that we are using. This bag is very recommended.
👤This case is perfect for any item that needs to be protected. The carabiner is perfect for attaching the case to something else. I will buy more UGREEN products.
👤A great product! I need something small and sturdy to put my earbuds in. The little guy had my earbuds, phone charge and cable. I've used and purchased UGreen cables and they seem to make high-quality gear. I'm very impressed! Great stuff! Thanks!
👤The case blew my expectations out of the water. I was worried that my Powerbeats 3 headphones wouldn't fit in the case I was looking for, so I bought a small one. I gave it a try, and they both fit perfectly! This case is very large and very protective. If you put it in your backpack, the contents will not be damaged. It holds what I wanted it to hold perfectly. I highly recommend this product.
👤It is a small case that fits my earphone, but it has a weird smell and I can smell it when I hold it close to me, which makes me uncomfortable. It is a good product, cheap and small for traveling, soft skin. If you just want a normal earphone case, this is a good choice, but if you can't stand the smell, then don't buy it.
You're good to go if you wait a minimum of 6 hours and push firmly into place. The strongest version of 3M VHB tape is what they use. The max weight for lighter items is 2lb / 900 grams. Do not place on painted walls or painted walls that are painted. There is an organized space. Designed for people who appreciate quality, minimalist style, andVersatility, it keeps your headphones out of the way and easy to reach. The OAPRIRE headphone hanger is made of colored clear acrylic and has a crystal texture. The smooth edges make the headphones scratch-free and wide support surface suitable for big headphones, cables, etc. There are no holes in the wall and the OAPRIRE is mounted with double-sided tape. Walls, cabinets, glass surfaces, monitors, desktop towers, etc. Each package contains a headset stand, double-sided tapes, and cable clips, which are a great gift. There is rich content and value. If you care about style, quality, andVersatility, OAPRIRE is the best choice.
👤I only give it a 2 because it ruined my walls. I bought these because I didn't want to put more holes in my wall, but it would have caused less damage than using these. They ripped the plaster off the wall when I removed them. If you want a hook that isn't going to destroy your wall when removed, don't get these. These are perfect if you want a more permanent hook. These are not recommened for a temproary reason, but I loved how sturdy they were.
👤I love these! I've purchased a lot of mounts for controllers and headsets. My husband's gaming cabinent has been completely transformed by it. The command strips are so sturdy that you can slam the cabinent door with the controllers mounted on them and they won't fall off. It's very easy to attach. Installation time for all five mounts was about ten minutes, with all my measurements, but I did get a little snoozing with our specific use. I think they look sleek and modern. Highly recommended for your storage and organization.
👤I was a little worried about them adhering rather than being attached via a screw because of the order I placed. The worst case scenario was that I had to place a screw to hold them, because they are simple and nicely made. I ordered them anyways. I mounted them immediately after we received them. The glue seems to be very good and it makes them last longer. I think they would hold most of the headsets out there. They came with no directions. I was already skeptical, so I went to their page on Amazon to see their instructions on placement. The red side of the glue is what goes on the furniture, and I used a pair of tweezers to get hold of it, as it is very thin and I didn't want it to affect the furniture. I put it on and waited 24 hours before hanging anything on them, as per instructions on their Amazon page. The cable clips are working well. I am happy with this purchase. I would recommend them to anyone who is looking for a simple headset holder.
👤I was looking for a simple wall mount for my headsets and this was what I found. A relatively unknown brand, however a simple idea that was nailed here. This slid between the window and corner on my wall. There is a The mount uses strong tape. I had no fear of it falling off the wall. It has a circular cable organizers if you want to keep the wires neat. Happy with the purchase so far.
👤The Oaprire wall-mounted headphone hanger is a clever and useful product intended for anyone who wishes to have his headphones close at hand withoutcluttering his desk. The molded black plastic that makes up the two devices in the box feels very solid and durable. It can be attached to a wall or other vertical surface with 3M tape. The cable clip, one for each wall mount, is a nice touch. The clip is simple: a rubber hemisphere, about an inch in diameter, with a hole in the middle. When the plug is pushed through the gap, the cable is held in place until the headphones are next used. This add-on feature is especially thoughtful since it helps to minimize twisting and other forms of stress on the cable. There is a The package contains instructions, two headphone hangers, two cable clips, two-sided adhesive strips, and two other items.
The wood wall hooks are easy to install. The coat hooks can be mounted to the wall by beginners. It is recommended to use a drill with a small diameter. There are aluminum alloy wall mounted coat hooks that you can use to organize and tidy your home. You will no longer have to go through the house to find your stuff with wall mounted coat racks. It's made of lightweight but sturdy aluminum alloy and can be used at your bathroom and kitchen. You can adjust the distance between the hooks according to the situation, come with 2 screw caps, and cover the holes for a flawless look. These hooks can be mounted in a variety of places, such as bedrooms, bathroom, closets, kitchen, pantry, entryway and garage for hanging robe, coat, hat, backpacks, keys, bags, kitchen supplies and more. If you have a question about their items, just send them a message and they will help you solve the problem. If you have a question about their items, just send them a message and they will help you solve the problem.
👤The rack allows for infinite adjustments. I had to use my own screws because the ones supplied are too short. A good product.
👤The reviews are small and the hooks are small. It won't work for coats.
👤I put my hair tools on it. Flat iron, curling iron, etc. It is sturdy and great. Love it.
👤It is kind of flimsy.
👤We use these on the hottub fence. They work well.
👤The first time I ordered this, it was scratched, so I sent it back for a new one. I didn't realize that one of the replacements only had 4 hooks, but it was installed. These are clean looking and get the job done, even though one star lost for that. They fit in the space we have.
👤It was easy to hang. The price is great.
👤I put one by the front door for coats, hats and other items, and another by the bathroom. If you have a heavy coat or purse, you can use 2 hooks for it, because the hooks are able to slide. It was installed in about 5 minutes.
The bag has 30 cell phone pockets and 30 clear card pockets. Even kids can do it in a few seconds. You can't put things on the wall after it's been installed because you can't stick it on the wall easy to tear it off. It's easy to stick on the wall at the bedside or bathroom in the home, dorm or office, it's as wall mounted semicircle box, left box to store the cell phone, earphone, glasses,remote, key, pen, pencil, sticky. Meeting your daily needs. Modern white color and plastic materials. It can be a simple style decor if you want it to be. There are two styles, vertical or horizontal. According to various demands. The dimensions are 8.7 inch X 8.7 inch X 3.15 inch. It's a good idea to organize bedside items before sleeping and bathroom. If you don't like this bedside shelf, they will give you 100% money back.
👤Hanging my keys and holding my wallet is great.
👤Like my keys and glasses.
👤There is a hook at the back of the plastic material. It was very easy to install. I use it to hang my mail. It has been working well for me so far. I like it a lot. Thanks.
👤My daughter has a loft bed that is perfect, has not fallen or budged, and her stuff fits on it.
Save space with a multi-functional homehook, headphone desk hanger that is ideal for hanging headphones, towel, coat, hat, backpacks, belt, key scarf, bag, jackets, suitable for kitchen, laundry room, bedroom, entrances for saving more space. comfort. Headphone holder. It's easy to access the headphone hanger. It is made of high quality PMMA material. Laser cut technology protects your headphones from scratching. A multi-purpose hanger. It's great for hanging cables, earphones and other gadgets. Clean and organized space. Installation is virtually anywhere - on walls, cabinets, glass surfaces, monitors, desktop towers, etc. You should organize and tidy up your workspace. Convenient installation. The first step is to use the wall drilling tool to drill a hole, the second step is to put the screw into the hole, and the third step is to fix the screw. It uses double-sided tape for strong, reliable adhesion. Before installing, please remove the white film of the acrylic, which protects it from scratches.
The Universal Game Controller HOLDER WALL MOUNT works with most third party game controllers. The holder is made from high strength plastic and has a solid base that perfectly fits the controller's profile. It's simple and practical to mount it almost anywhere with the pre-fitted 3M tape, it's strong, stylish and can be mounted almost anywhere. SECURE INSTALLATION Their Universal Game Controller mount can be installed almost anywhere, it comes with 3M VHB tape pre-fitted and can be installed on desks, shelves, cabinets, glass surfaces, rear of the TV/monitor, and many more. VHB is used by GoPro to secure their cameras during extreme activities so you can be sure it won't let you or your controllers down. The max weight limit is 1.5 kilogram. The Game Controller Holder comes with a twin pack so you can hang all your controllers out of the way, preventing damage and keeping your game space free and organized. The two player mode allows you to store two controllers nicely away, so you don't have to look for the second controller when your friends come around. They will be placed on the wall.
👤I would give it zero stars. I tried to take it off, but it ripped a hole in my wall. It has a horrible texture that makes a weird noise when you put it on and off. Save my money, your wall will thank you.
👤The reviews show that the sticky application pad on the back works well. It takes a lot of big chunks of drywall to remove it from the wall. They are great if you use it in metal or concrete. The material will be removed when it is removed off the wood or drywall surface. There is a The solution was to remove the sticky pad from the back and use a single command strip to remove it without damaging the wall. I only needed one strip which is $5 on Amazon.
👤I put these on the wall and was very impressed with how sturdy they were. They held my headphones and controller. Things went out of control after I rearranged my office and wanted to move them to another location. The suckers were stuck on there. I had to pry them off and then rip a chunk out of the wall. It was easy to patch and repair the holes, but they were rendered useless. I don't think I'm committed enough to use these mounts again, even if I did, because they are only one time use. If you're going to use these on drywall, be very sure that you want them there for a long time, because they work, but be very sure.
👤They are great but I recommend removing the glue and getting 3M. Unless you want it permanently on the wall and never to move it, it will pull the pain with it.
👤It works. It is annoying that the controllers take a little bit of balance to make sure they don't slide off. The sticky tape on the back provides a solid connection, so I am a little concerned about how I will remove these from the wall. There is an edit. I had to move these sooner than I wanted and now I have a paint/wall repair to do. Even though I tried a few different ways to detach the holders, paint and layers of wall came with it. I will be trying to get the 3M tape off the back of the product or I will find a new product that screws into the wall. It would be easier to patch that. There is a I would make a wood backer that I screw into the wall and attach the holders to the wood if I had the chance.
👤Works well! You get twice as many if you are cheaper than the name brand alternatives. The 3m tape is very strong and can be stuck to the wall.
👤If you have a razor wolverine ultimate, this isn't for you. It can't hold the thing. I thought it was modular, but I was wrong, they considered other major controller brands, but it was not. I dropped it off to get it back.
One holder for all is designed to hold your game controllers and headphones in one place. The heavy duty folding hooks are made from aluminum. The coat hook is 78 x 26 x 71mm/ 3.07 x 1 x 2.79 inches and the screws are 25mm long and 8mm in screw head diameter. You can use these folding wall hooks to hang dresses, clothes, headsets, and hats in different places, such as bedrooms, bathrooms and closets. The hanging hook has a smooth edge that will not damage your clothes or items you hang on. The folding hooks are very easy to install. The hooks are reinforced with 2 screws. The folding hooks are very easy to install. The hooks are reinforced with 2 screws.
👤If you are looking for an item to see your nerdiness, then these are the ones for you. Your headphones are mounted on your wall as if they are a trophy buck. If you want to impress the ladies, you should show off those beautiful headsets. The folding mechanism makes them disappear like your father when you were a child.
👤I had the idea to hang my headphones and a bunch of stick on hooks, but they came up a few times. This one gives value. There is a 5 piece package out there, but this one of 4 costs less. It is made of metal. It falls down. It's about 3 inches or something like that. Comes with screws. I have 6 headphones on the wall. It will work for any hook of that size. I can flip the doors up when they're not in use. You don't need to search for hours to spend 10 bucks.
👤The Greekia version of these are twice the price, and they are fantastic. I was trying to save money, and so I ordered these, and two of them fell apart and opened up. There is no way to put the pins back together after the plastic came out from under the metal lip. The two that were usable were from the four pack.
👤I didn't want to spend more than a few dollars for a mount for my controller. The official ones go over 15 dollars but are not worth it. I found these for a lot less than I expected. If I had bought a headset mount and controller, it would have cost me 30 dollars and I would have had to pay 6 dollars for it. It worked out great.
👤Nice idea, nice design, poorly executed with cheap materials. I received more than I wanted because I marked the box twice. I have replaced one of them three times now. They hang partially open after install, as they no longer flip back to their original position.
👤I bought these brackets to hold my gym gear. They're easy to fold when not in use. The brackets can hold a lot of weight. My opinion is over 10 lbs. They would be great for hats and jackets.
👤I needed a couple of hooks for my headphones and for the price, I got this kit of 4. There is a This is a bargain and it is sturdy. One of them holds their guitar by a strap for weeks without a problem if you use the correct screws. The elbow part is strong and will hold pounds and pounds of load, but the folding design may be deceiving, as it is more of a mechanical design.
👤The metal is easy to open and close, and it stays closed when closed. It's a good size to fit big things.
Universal mounting: The portable vehicle headrest mount player allows you to easily install the posts into your car. Everything you need for a screen cover, mount, and remote control is included. Damage-free mounting. Mount your gaming headset almost anywhere. The premium-grade headset holder uses a specialremovable glue to avoid damaging the wall. This product is ideal for people who don't want to damage their headset or wall. This stand has an extra large cradle to make sure it is compatible with larger gaming headsets. This stand has a soft-Silicone holder to protect your headset band from scratches. It's compatible with all gaming headsets, over-the- ear headphones, and on- ear headphones. TOTAL MOUNT is the leader in electronics mounting. Over 70 patents, 50,000 five-star reviews, and a long history of quality make TOTAL MOUNT a leader in its field. TOTAL MOUNT is the leader in electronics mounting. Over 70 patents, 50,000 five-star reviews, and a long history of quality make TOTAL MOUNT a leader in its field.
👤The product works as intended. I have a headset on my computer. It seems very sturdy and has no fear of falling.
👤I have a headset that most stands don't work, but this one does very well with it.
The best choice is the headphone hooks. There are double methods to install all gadgets. The best way to cut down oncluttering is with a headphone stand. The model has a dual headphone holder that can be turned into a rotating sphere. The design makes the clip easy to use and looks great when holding your headphones. All kinds of wired and wireless headphones can be held under your desk with the stick-on 3M VHB. Non-Abrasive aluminum cover is compatibility. It is easy to remove the screw clamp. It is a strong headphone Hook because it can hold PC gaming headsets without bending or breaking. Installation with screws and a rotating ball plunger can be adjusted to fit under tables. padding should be on the arm or hook that will support your headphones. Easy to install, do it yourself structure. Maybe you don't have any ideas to create a proper headphone stands, but the headband is compatible with all aluminum alloy stands. If you take a review from their store, you can start packing up your items in a well-organized manner. Can Mount Anywhere is a versatile design. Those who ran out of space or are simply looking for pure efficiency can use the economic solution of Gamital Design. One of the best headphones is simple, modern and economical. If you have too much stuff on your desk and no room to spare, you can just put your headphones in the drawer and forget about it. There is a lifetime warranty for quality issues. They're confident in their design and quality and their goal is to improve office efficiency with gamital fitting. The store provides 7 hours. There is a local technical support and satisfaction guarantee. Buy it. Enjoy a high-quality product.
👤Work threw out some motorized sit-stand desk frames so I was able to build my wife a desk that was a surface. I bought a butcher block from the hardware store, mounted it, and bought accessories to make it more functional. It would be nice to be able to hang headphones under the desk and use a magnetic charging cable to keep them charged when not in use. There is a The stand is very functional and looks good with the heavy aluminum. I didn't bother with the glue because it wouldn't work unless the desk is very smooth and won't adhere long with frequent use.
👤I put my headset on the underside of my desk in order to clear some space up top, and then I put my headphones on the underside of my desk to have better sound and ear pads. It's easy to put a couple of screws in if that fails.
👤The 3m sticks well. It doesn't budge. Don't worry, watch the video. The headphone hanger is able to change direction with no issues and this is what distinguishes them from the other offerings. There is a Every single detail is taken care of.
👤It works well and gets the job done. I wanted a small mount that didn't take up a lot of space, and this one was great. I only used the backing, not the screws, and the ashesion level is still great, even though I only used the backing. It feels more sturdy because it is metal as well. I am happy with my purchase.
👤I was really annoyed that the shipping took longer than it had said. I gave it to my dude for his office and he uses it a lot.
👤My Steelseries 9x headset has a great hook. The glue on the other hand is terrible. After a week away, it came back to them on the floor. For whatever is worth.
👤The construction feels solid and the parts move very smoothly. I like that you can change the hook and out locks at 90 degrees. I can't say how good the backing is because I screwed it in.
👤The stick hanger is made of high quality aluminum. The material is tough. The anchoring 3M sticky is easy to bear. It's a good design for me, it offers two ways to mount under the desk, slide to another side and use screws. It's really a simple, funcitonal, extremely effective space saver hanger.
Headphone holder wall products from Avantree. In this article about headphone holder wall you can see why people choose the product. New Bee and Ugreen are also good brands to look for when you are finding headphone holder wall.
Avantree, New Bee and Ugreen are some of the best brands that chosen by people for headphone holder wall. Find the detail in this article. Oaprire, Minalce and Jdgooma are also brands that their products are worth to check.