It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc. Small and foldable design saves space. It can be used to free your desktop from chaos. Safe and Stable: The headphone stand has strong glue that will allow it to last a long time. The materials are high-quality. The rubber pads on the headband protect it from wear. All kinds of headphones, such as wired headphones, wireless headphones, gaming headphones, TV headphones, and so on, are suitable for the universal headset holder. It's easy to install and can be mounted anywhere. On computers, desk, and wall. Clean the surface by using wipes.
👤I was very happy with my purchase of this headphone holder, but it has been a year since I purchased it. I noticed that my headphones got in my hair when I noticed the odd goop on the bridge. The pull out bracket that my headphones rested on was the culprit. I was able to use alcohol wipes to remove all of the liquified glue and I was also able to repair the small pad that locks the brackets in the closed position with some automotive grade 3M double sided tape. Hopefully it will hold up better than what was used to assemble it. Is this the end of the world? I am going to keep an eye on it because it was a quick repair.
👤I have a charging station in my laundry room. The hug makes it look less cluttered and it gets a lot of stuff off the counter. I charge a lot of stuff on this station. The double sticky tape is used. I made it even more solid by attaching a couple screws to the holes. Unable to keep earbuds and headphones off the countertop while charging. If you don't have anything to hang on it, this is a great option. I'm very happy with the space that was cleaned up.
👤The option to screw it into your desk is what I bought this hook for. I tried the glue before I tried to put it in. I had low expectations, but the sticker is so strong that it's like a combination of Ultimate Warrior and Hulk Hogan. I'm thinking about buying another one for my towels.
👤My father built a desk for me that is solid wood. It was built for writing, not a computer. I used the glue that came with the product because I couldn't drill a hole in it. I have a very light-weight Sony headphones, but they haven't budged over a month. The hook portion is large and padded to not damage my headphones. I might put two different pairs on there. I love that when I move this desk, I can just close the hook and it won't be a problem. There is a The metal is heavy and shiny. It's a good addition to my desk. I wish it didn't have the logo, but it is perfect.
👤Unfortunately it did not last. It fell off my wall in the middle of the night, luckily it didn't break my headphones, I was sleeping. It was loud. I might use it on a wood surface with screws to hold it up instead of giving it to someone else. Holds fast to painted plaster. I've considered buying another one just for the tape. It has been on the painted plaster walls for a long time. It holds my headphones and doesn't bang when I place them down. The inside of the "hook" is made of some kind of material. It doesn't open without you meaning it to.
👤This is what it seems to be. I thought it would be bigger but it is not. I used the two screws instead of using the glue to stick to the wall. I would have been concerned that the headset wouldn't hold it's weight. There is a This looks great on the wall. When I moved my console, I realized I lost the space I wanted for the headset stand and that's when a hanging stand became optimal. This is in front of my console. It's difficult to pull it down when it's folded up, because you don't have headsets on. I think that will loosen over time with use and shouldn't be a negative.
Universal mounting: The portable vehicle headrest mount player allows you to easily install the posts into your car. It comes with everything you need, including a leather screen cover. It is easy to install. You can easily move the stand to any place you want. No screws are needed to steady mount the desk clamp to your office desk, gaming table, bedside, studio, glass desk, headboard, nightstand and tables. The degree of flexibility is. The headset holder can be swung under your desk to take off the earphone. The desk clip is suitable for most furniture surfaces. You can organize your life. A universal headset holder. It can help you place headphones, it can also hang bag, hat, umbrella and other daily gadgets in your kitchen counter, bookshelf, entrance cabinet and so on. Save space by keeping your life in order. Anti-slip and durable. The part of the desktop and headphones hook that is covered with rubber pads will not scratch the furniture. The connecting rod of the headphone stand is made of metal and will hold your headset firmly and not easy to break. It is wide compatible. This under desk mount is compatible with almost all wired and wireless headphones.
👤The unit is made of plastic and has rubber pads. It holds up my headset. After being locked into place, it clicks into preset levels. The height is not adjusted. I wanted it for that reason. You may or you may not. Installation was easy, the two parts that fit together with a screw handle set the tension. It has the ability to screw down tightly. I'm happy with it.
👤The Lamicall Headphone Stand/Hanger is located. I stumbled across this on my daily check and it's a huge problem solution for people who have a minimal overhang on their desktop. No one is worried about it coming loose. I tried it for anyone with a severe lack of overhang and it worked. A perfect solution is recommended.
👤If you don't mind permanent damage, you can flip the hook over, the cover plate for the screw is secure, and the screw is easy to strip. It's much easier to grab my headphones than it is to use them.
👤The Lamicall Headphone Stand, Headset Hanger is a very simple design. The knob mechanisms of other designs are more difficult to deal with than the tightening/loosening barrel mechanism of this design. The jaws which contact the table edge are made of rubber so that the stand won't slip when tightened. It holds my headphones and is attached to my desktop. It was protected well during shipping. I will buy a second one for my office.
👤I needed a headsets stand for my equipment. I thought I was going to find desktop ones, but something that wasn't on my desk turned out to be even better. The only place that I could put my desk drawer was on the side of my desk, and it was a very short lip. I didn't think it would stay on being clamped. I was wrong. It has a strong grip. I am very happy with it.
👤My husband needed a place to store his headphones, so I gave this to him. The holder works well. It works well in our small apartment. It saves space by attaching to a table or desk.
👤I like that it has a wide hook. It's great for my desk to hold headphones.
👤I bought this for one of my grandsons so he could place them in a safe place when not in use. Did the job!
👤The job was done well and so 5 stars there. It's one of the few that allows the rest to go under the desk as well. I wish it had a way to lock the rotation of the rest and a smaller form factor for the part on top of the desk.
👤The item works as advertised. I use it to hang my headphones and wrap cords. You can put it at any angle you want. The delivery was fast. I would recommend it.
👤Je fais tu télétravail et j'ai un casque pour mes rencontres. Tout ce qui voyais des produits. Je chose to besoin. A un caoutchouc pour protéger mon meuble. et serrer le support Je recommande.
The best choice is the headphone hooks. There are double methods to install all gadgets. The best way to cut down oncluttering is with a headphone stand. The model has a dual headphone holder that can be turned into a rotating sphere. The design makes the clip easy to use and looks great when holding your headphones. All kinds of wired and wireless headphones can be held under your desk with the stick-on 3M VHB. Non-Abrasive aluminum cover is compatibility. It is easy to remove the screw clamp. It is a strong headphone Hook because it can hold PC gaming headsets without bending or breaking. Installation with screws and a rotating ball plunger can be adjusted to fit under tables. padding should be on the arm or hook that will support your headphones. Easy to install, do it yourself structure. Maybe you don't have any ideas to create a proper headphone stands, but the headband is compatible with all aluminum alloy stands. If you take a review from their store, you can start packing up your items in a well-organized manner. Can Mount Anywhere is a versatile design. Those who ran out of space or are simply looking for pure efficiency can use the economic solution of Gamital Design. One of the best headphones is simple, modern and economical. If you have too much stuff on your desk and no room to spare, you can just put your headphones in the drawer and forget about it. There is a lifetime warranty for quality issues. They're confident in their design and quality and their goal is to improve office efficiency with gamital fitting. The store provides 7 hours. There is a local technical support and satisfaction guarantee. Buy it. Enjoy a high-quality product.
👤Work threw out some motorized sit-stand desk frames so I was able to build my wife a desk that was a surface. I bought a butcher block from the hardware store, mounted it, and bought accessories to make it more functional. It would be nice to be able to hang headphones under the desk and use a magnetic charging cable to keep them charged when not in use. There is a The stand is very functional and looks good with the heavy aluminum. I didn't bother with the glue because it wouldn't work unless the desk is very smooth and won't adhere long with frequent use.
👤I put my headset on the underside of my desk in order to clear some space up top, and then I put my headphones on the underside of my desk to have better sound and ear pads. It's easy to put a couple of screws in if that fails.
👤The 3m sticks well. It doesn't budge. Don't worry, watch the video. The headphone hanger is able to change direction with no issues and this is what distinguishes them from the other offerings. There is a Every single detail is taken care of.
👤It works well and gets the job done. I wanted a small mount that didn't take up a lot of space, and this one was great. I only used the backing, not the screws, and the ashesion level is still great, even though I only used the backing. It feels more sturdy because it is metal as well. I am happy with my purchase.
👤I was really annoyed that the shipping took longer than it had said. I gave it to my dude for his office and he uses it a lot.
👤My Steelseries 9x headset has a great hook. The glue on the other hand is terrible. After a week away, it came back to them on the floor. For whatever is worth.
👤The construction feels solid and the parts move very smoothly. I like that you can change the hook and out locks at 90 degrees. I can't say how good the backing is because I screwed it in.
👤The stick hanger is made of high quality aluminum. The material is tough. The anchoring 3M sticky is easy to bear. It's a good design for me, it offers two ways to mount under the desk, slide to another side and use screws. It's really a simple, funcitonal, extremely effective space saver hanger.
It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking. The rotation is done at a certain degree. The stick headphone hanger can be applied to different positions. Can paste under a table, under a desktop, under a cabinet, and on smooth surfaces. Headphone cable organizers. The headphone hook with the headset cable organizers can be used to make your desktop more tidy. Quick install. The holder has strong double-sided tape. Please hang your headphones after 24 hours to make sure the suface is dry and oilless and to make sure the hanger is firmly stuck. The hook of the headphone holder stand is made of rubber. The leather of the headset head beam needs to be kept free of the hook. It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc.
👤I gave one as a gift. The mount comes with an extra sticky pad so you can move it to another location if you want. The material is sturdy and doesn't feel cheap. We've bumped into it a few times but it hasn't broken or anything, but the mount is most likely going to fail given the weight. The mount can be used in many different ways, and it is very versatile. I've seen other options that aren't gaming headphone stands that take desk space, and plan on buying one for myself.
👤The item cannot be placed on the underside of the desk. For a few days, the glue stays. Twice, I used up the two patches that came with the product. If the base is mounted on the top side of the desk, this item will work. This takes up space on the desk surface that I didn't want. The product did not work as pictured, even after following the mounting instructions exactly. The device will not hold the Apple AirPods Max. Don't buy.
👤I have a white desk and a light grey chair, and this is the perfect accessory for it. The design is simple and quality. If you clean the surface before applying the glue, it will cure in 24 hours and be very strong.
👤The rotation feels great, it feels like clicking every 90 degrees. It was easy to install the included glue under my desk. It's easy to set the headset on when I work because I rotate the clip out. When I'm not working, I put it back under the desk so no one accidentally bumps into it. I used to have to reach under the desk to get to it. The double-sided cord clip is great to have because it allows you to clip in a headphone cord as well. If you need a power cord. The clip is a little flimsy. When I plug the headset into the light pull, I have to pop the cord back into the cord holder, which is an extra step. I would like the cord to stay in the clip.
👤The glue is terrible. Will not hold instuction to let the glue set for 24 hours, it did not work after 2 days. Might as well drill through the base with screws. You're better off with the screw style. There was an update on 2/7/2022. I did what I suggested a couple of weeks ago and it worked. The company made contact with me after modification and offered to send me a replacement. I said no because I accomplished the above and didn't need another one. They still wanted to give me a refund and send a new design with a scew shaft. The design worked better and the original cost of the order was returned. I increased my rating from 1 to 3 stars because of their customer support. You don't hear about it a lot these days.
👤I bought two of them because I liked this. They were easy to install. I had to store my headphones on them and I had to make sure it was good. One of the holders fell about three months later. I stuck it back up after I wiped the dirt off the spot it was going on and it seems to be holding up. I will switch out the glue if it falls again. The different ways in which it is held makes it easy to remove it from the way.
You will get a headphone holder. 60-day money back is promised. They are confident in their products. Please contact them if you have any questions. The foldable headphone is called a Hanger. It can be lain flat on the wall when it is not in use, folding, or expanding. The built-in cable loop is designed to prevent your headset's cable from dragging on the ground or getting caught between your desk chair's legs. Universal Headphone Stand Under Desk is a universal stand that can fit on most desks. It is easy to remove and re-attach the screw clamp. Soft rubber pads located on both ends of your desk or table protect it from damage. Premium quality is made of aluminum metal. 60 days of money back is included in the Headset Holder Warranty.
👤I purchased the upgrade version without the cable organizers and the new upgrade with the cable organizers. Both versions had the same features, including the solid aluminum screw knob and the notch on the screw clamp pad for attaching to round desk legs. They arrived at the same time, and the upgrade version matched the catalog picture. The Newest upgrade did not. There are significant differences between the pictures of what arrived and the picture of the Amazon catalog. There is no notch for mounting to round desk legs, and the screw clamp pad is not completely flat. The cable organizers are on the opposite side of the hanging arm. The quality of the product was lowered from theUpgrade version in the changes #1 and #2. I will return to Amazon for a full refund. There is still a 1-star review. The seller reached out to me shortly after my initial product review to let me know the product I received was the older version which was replaced in August with the newer version. If I were to order it again from Amazon, they would give me a coupon that would let me get one for free. I took them up on their offer, but I was surprised to see that the older version of the product that had been re-released by Amazon was still there. The seller doesn't control what version of the product remains in Amazon inventory, but this is now November. You would think they would have exhausted their older version of the product by now. I purchased the exact same version of this product from another seller and they were able to deliver the newer upgrade version. 1-STAR to Amazon for pushing old inventory and 1-STAR to the seller for updating their product description, but then continuing to sell the old version through Amazon under a new product listing which does not match reality. I wonder how many other people who thought they were buying the newer version of the Prime Day product got shipped the older version. I was ready to write-off Apphome Direct forever after my second disappointing delivery of the older version of the product. Apphome Customer Service is persistent in ensuring that their customers are completely satisfied with the purchase experience as well as the products they sell. They apologized for the incorrect product being shipped and asked what they could do to make it right, after they had already fixed the issue. The only way for that to happen is for Apphonme Direct to send me the correct version of the product at no cost, and they will refund the price of the product if I purchase it a third time. "Third times the charm" is what they say, and it was in this instance! The newer version of the product was shown on the product page after I received the product. It's a good sign! I have dealt with a number of sellers on Amazon over product issues, but Apphome Direct Customer Service went above and beyond to make sure I was completely satisfied after my previous two bad purchase experiences. Apphome Direct is deserving of praise. I am happy to make more purchases from them again after having a positive experience with them.
The 2-inch wide and curved headphone siting bed is suitable for all types and sizes of gaming headphones. Curved headset siting bed will not cause the headband to crease and will hold it in place. Your headset will not fall off again. Keep the cables organized and don't let them drag on the ground. There is a spring-loaded and an adjusted Clamp. The dual headphone stand holder has a c-clamp that can fit most desks or shelf boards up to 39mm in thickness. They can split the hooking stations. It is easy to install, remove and reattach. The under-desk headphone hanger allows you to adjust it to any direction. You can put 2 headphones on it at the same time if you change the hooks. Swings underneath your desk for discreet storage and swings back out for easy access. The headset mount holder is made of plastic and can hold up to 1 kilo for each hook. The anti-skid pads prevent the surface of the desk from being scratched and the leather of the head beam from being scratched. Holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Universal under desk design allows for a near universal fit on most desks. There is a new word for it. The Spring Clamp is easy to remove. Not only for storing all kinds of headphones, but also for headsets, glasses, and bags.
👤I've been looking for an affordable HP hanger for a while now and this showed up. I had to look at the product picture to see if it was a good one, but it was definitely a quality product that I wanted to write a review of to help other buyers. There is a Excellent quality plastic, does not look cheap at all. The arms circle 3600 so you can easily adjust as you please. My xbox and ps headsets are hanging from it, it's sturdy and they're all fine. The Clamp is padded and has a spring so no worry about overtightening or scratches! It has about a quarter of an opening and a quarter of a grab. It's not easy to open and fit a Clamp, but it's not something that would break easily and you would keep changing it's position, I suppose. I have a lot of HPs that are frequently used so item like this helped me to organize them and keep them within reach. I ordered two. There is a I recommend this product, give it a try, and forget about it, just hang the HPs. I think this comes with a warranty as well.
👤The single and double versions of the headphone holder are from this brand. The first picture has a side by side. The double is stronger than the single and has the ability to hold 2. You can use it to hold both and also to hold one inside the other. I use the attached loop to hold my gaming headset and my music headphones. The instructions on the box make it convenient and eco friendly. There is a The holder doesn't take up a lot of space and holds 2 headphones well, if it's a flat facing one that's less than 1 1/2 inches thick.
👤I got a clip-on headphone stand to keep my HyperX Cloud II headphones out of my desk space. The desk I have is less than half an inch thick and the previous clip didn't hold it well. I got a replacement for my headphones, and it works well. The spring-loaded clamp is very tight and has no minimum thickness needed. The spring is strong and keeps the hanger steady. The construction is great, and while it is advertised as a dual-headphone hanger, the individual hangers fold in on each other, so you can use it as a single or double, and you can rotation the hangers in any direction you need. I'm very pleased with the product and have been using it for over a week.
👤I tried to put my backpack on my desk, but it flipped off. It works well with lightweight items. I like how easy it is to turn it. I'll probably buy a sturdy hook for my backpack. This works well for keeping things out of my way and away from my desk.
👤This is easy to use and can be used many different ways. My desk is thick and I had trouble finding a headphone holder. The problem was solved by this hanger. It was easy to fit onto my desk. The pads on the clamp are very strong. It's easy to remove the perfect amount of pressure from the clamp and use somewhere else. Very portable. The two arms are great. You can change each one in a number of ways. You can choose from endless options with each arm rotating. I use multiple headphones that need to be handy at my desk so I turn one arm inwards towards my desk. I can fit all my headphones on my arms. It's convenient! This is a great price for a headphone hanger.
Customer service is great. Give it a try. You can return it within a month if you don't like it. They will send you a new one if it is faulty within a year. Universal under design allows for a near universal fit on most desks by attaching a thin, narrow, and thick piece of metal to them. It is easy to remove the Spring Clamp. The audible headphone arm swings underneath your desk for discreet and non-intrusive storage and swings back out for easy access. BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Soft rubber pads are located on both ends to protect your desk or table from damage. The under desk mount is convenient for storing. Easy installation of a springed C Clamp.
👤We needed a better solution to keep our headphones from breaking and this was our answer, it's very sturdy and feels very well made, it's even better if you have an xbox one controller, it's even more perfect. My purse is probably around 10 lbs. I'll probably order more for myself and gifts in the future. Highly recommended.
👤The hook portion can bend if you put a lot of weight on it and it is very cheap. There is a The head doesn't lock up. The clip is not tight enough to prevent desk steps that are less than a quarter of an inch from moving. You can get a Brainwavz Hengja Hanger for the same price that has better construction quality. I would've gotten a second one, but I got this instead when the page from my old order suddenly said out of stock and started directly to a screen protectors. I wouldn't buy it again. Cheap, poor construction, plastic bends, top sticks up a lot. A bad product.
👤It's easy to put my headphones out of the way. I didn't want one where you have to use glue or screws. You don't need a heavy duty one if you have light headphones. The mount has a sufficient amount of space. The desk is protected by the padded clamps. The mount has a hook so you don't lose your headphones. You can choose which direction you want to hang your headphones. The cord clip is nice, but it's stiff, so I just wrap it around the hook and grab my headphones when I need them.
👤This thing is great. I was embarrassed that I didn't think of getting this a long time ago, but I did not know it existed. Maybe it didn't. I am a recording artist and I use expensive headphones. They were not taken very well care of in the past, as they would flop around on various surfaces. The device is easy to set up and I like that the hook can be changed to hang things or not. I think it's a good deal so that I can get another one for my other cans. I recommend this to anyone who wants to protect their investment.
👤It was easy to put in place. I got this because I was sick of my headphones laying in random places. The hook is neatly underneath. The picture doesn't show it, but there is a small loop for a cord to go through so I leave my charging chord handing from there so all my cords are close together and easy to manage. You can put the headphones on the hook and swing them out of the way under your desk. I put one on the side table for my headphones.
👤I didn't expect to write a review on this. I thought I knew what I was getting. This is a cheap, easy to scratch plastic. The cable clip would be better not there. The only. The mechanism for twisting the hook into different positions is a nice thing about this. You only need to rotation from 90 degrees and 180 degrees. The hook is pretty loose and you can position it anywhere from 0 to 180. I would have given it a pass, but the junk quality means it should be a lot cheaper than other METAL items. It would be a good deal at five bucks, since I got it for twelve ninety nine. If you don't know better, maybe eight. No way in over ten. I'll probably keep it because it's not worth it with the Pandemic. It will have to do.
Keep your headset's cable in place and prevent it from dragging on the ground, that's what the upgraded version of the cable holder says. You can keep your charging cables in a safe place. Keep your desk clean. Practical and convenient! It's great for home, office, classroom. Save space with the foldable arm. The arm can be folded up when not in use. When folded, it is smaller than your palm. Save space! The rubber strip on the raised arm keeps it folded. There are no worries about the adhesion. The rubber pads are attached to the ends of the clips to protect the desk surface from scratches. The desk can be mounted within 50mm. Also fit cabinets, shelfs, and glass flat surfaces. Excellent quality, no damage to the leather. The rubber pad on the headphone hook is arched. The holder has a 3-inch arm and is ideal for both wired and wireless headphones. It's also suitable for backpack, purse, umbrellas and so on. The headset stand is made from metal and can support up to 11 lbs. 60-day money back, 12-month warranty. They are confident in their products. Please contact them if you have any questions.
👤You think you don't need this product until you buy it. I don't like having to put my headphones in a container every time I use them, and I don't like having to take them out. I didn't like leaving my headphones out to collect dust and suck up space inefficiently. I decided to give this product a try. I love it. It's simple, elegant and very versatile. I was worried that it wouldn't fit on the front side of my desk. It was easy to fit to the legs of my table because you can adjust the hook's direction. It will still collect some dust, but it will be less than under something. This product is great for anyone looking for storage items.
👤I didn't want a stand on top of the desk as there was not enough room for one without my desktop getting crowded. I was looking for a hangar that I could hang on the inside of the frame, so that it wouldn't stick out to pedestrians. There is a This hangar is perfect. It seems to be well made and sturdy, has pads so as not to damage the desk frame, and it has more than enough adjustability to accommodate thicker desk frames/tops. I like the clips to hold my headphones, it's nice to be able to roll it up and stick it in without having to worry about the wire getting loose. There is a My cable-managed PC station has a new addition.
👤I bought a new headset for my computer. I picked it up. The rubber coating on the ledge helps keep the headband from sliding around. It has a lip at the end that helps to keep your headset from sliding off of the end. I had a similar stand for my headset, but it didn't have either of these features. I decided to replace the stand for my console headset after I thoroughly enjoyed the new one. I like that the stand can be folded up when not in use. I would highly recommend this stand if you were thinking about getting it.
👤I attached this to the leg of the table that I use for my computer desk to free up space for my headphones. I like the fact that the mount can be turned so that it can be mounted vertically or horizontally. The screws/screw holes/allen wrench are not up to snuff. The allen wrench takes a little work to get into the screw heads, and the screw holes seem to be off-level. The screws are not in a straight line regardless of orientation. It is very odd. I am able to change the orientation of the mount without a problem, and once mounted it is not coming off the table's leg until I remove it. I am very satisfied that it mounts firmly. It's probably too much for the headphones I am using, but that's not my main concern. I'm happy that I can keep my headphones plugged into my computer and have them tucked away, so I can use them whenever I want.
If the cable is fully inserted and the switch is on before you use, the volume can be adjusted and your devices are suitable for their combination of audio and voice connetors. They offer a 12 months warranty to their customers when they purchase a gaming headset. The ear pads are foldable and collapsible. The ear pads are magnetic, making them easier to clean and maintain than other headphones, and the headphones fold inside the arm, making them perfect for easy storage and travelling. The lightweight design of the ear cushions allows for up to 8 hours usage without excess pressure build up, meaning you won't feel any pain even after a long game. The weight is only 0.66lb, which is 40% lighter than standard gaming headsets. The bendable microphone arm can be fixed to any position to ensure the clearest voice pick-up, and filters out surrounding environmental noise and static. The Senzer noise cancelling headset with microphone provides real-time in game chat without delay, making it easier to communicate with team-mates, friends and family. The surround sound gaming headset gives you crystal clear audio and is a great way to enhance your gaming performance. Pick up the direction of gunfire, vehicles and voices more clearly, as well as enjoying a more enhanced audio experience as subtle sounds like footsteps, wind and rain are projected with more clarity and precision. Plug and play multi-pLATFORM COMPATIBILITY works with most modern devices that have a 3.5mm jack, such as the PS4 and XBOX One. Plug & Play makes it the ideal headset for travelling or as a gift, safe in the knowledge that it will fit a multitude of devices.
👤I own two pairs of Senzer's SG500 headphones. I gave the first pair to a family member and then grabbed another pair for myself. The sound quality is good and they feel light and comfortable. Pros and Cons: - The build is good, the soft weight is easy to travel with, and the microphone is permanent. The band is great for the buck. 100% would recommend.
👤I use these headphones for work. I needed a mic that wasn't attached to the wire part of the headphones. The mic on the wire of the Beats Solo3 would rub against my shirt or hair and my coworkers would be able to hear it during zoom meetings. My mic wasn't as clear when I went wireless with the beats. These headphones are very comfortable. The memory foam ear pads are squishy and there is no squeezing on my head. I'm able to wear these all day for work and not have any headaches or neck pain. I was a little worried since they look huge in the listing, but they fit perfectly and I am small. These would be great for kids and small adults. They can extend for larger heads. I like that they fold up so I can leave them on the side when I'm not working. The earpads are magnetic and can be removed, but it's not clear why anyone would do that unless it's to change them. The best part is how easy it is to connect these to my computer. It's just one cord, not the other way around. I've been using the main input aux cord, even though these come with an accessory. There is a The sound quality is what you would expect from a pair of headphones. I can't hear the AC running in the background if I have music playing, but it's not as bad as the Bose noise canceling Bose. The bass on these is clear and not distorted like most cheap headphones. I'm happy with the sound quality. They look like pilot headphones, but they are lightweight and portable. I wish the mic could be turned off, instead of being bent upward every time I want it out of the way. If I keep bending the mic wire upward, how long will it last? There is a knob on the left side that I don't think does anything.
👤I found these headphones on Amazon. If I could, I would give these headphones 10 stars. The sound quality and price are what I base that assessment on. I am a DJ. I use expensive headphones. $200 is the retail price for these headphones. I have to take them off my head because it's too loud and they won't break. The sound quality is better with these headphones for $50. The drivers produce clear sound. The way in which each headphone is made with a large cavity produces a very good base. The comfort takes these over the top. I could wear these headphones for hours because of the soft cushions. I plugged them into my PC and played some music through them. The sound was clear and I was amazed that this was using a video from my PC. They did not distort one bit when I turned them up as loud as they would go with the volume on my PC. If you're going to be using the headphones for music, you can tilt the microphone away from your face. It comes with the y splitters so that you could use it on a PC as well. The microphone is good. He adds a lot of depth and quality to the experience. I hid them in a cabinet because I don't want my son to try them because he's going to want to smoke them. I like the retro look of these headphones. If you're looking for a good pair of headphones to play music on, I highly recommend these! Purchase them now! He will be happy that you did that. If I ever break my DJ headphones, I will just use these. I paid for one of these and could buy four more for less.
The dual Headphones Hanger under the desk can hold two headphones at the same time, with a headband width within 2.1inch. The rotating neck of the headphone arm allows it to be used as a storage option for heavy headphones. For a near universal fit on most desks, the Clamp can be as narrow as 5mm and as thick as 50mm. It is easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or table from damage. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.
👤I transitioned from a regular desk to a standing desk and I love it! There is a I bought the Anti Fatigue Bar to stand on so I can work on a stand up desk. I bought a dual stand under my desk so I can hang my headphones when not in use. It's very easy to install on a desk and it's very sturdy, but I like that it rotates so I can tuck it inside the desk rather than have it stick out. Absolutely nothing! There is a 5 out of 5 stars! If you need to hang stuff for storage, such as headphones, book bag, and anti fatigue bar, I highly recommend this. It's strong enough to hold anything. There is a Hope this was useful. If it was, please click on the button below. Thank you!
👤The design is subtle and easy to install, and thepadded hooks can be adjusted to your desk. There is a If you have a thicker desk, you won't have much clearance for your headphones. This was used for our headset. The hooks aren't adjusted to go lower than the C clamp, so it barely fits under the desk. I thought it would be bigger and longer because of the reviews. Would not be possible to fit 4 quality headphones on here. I thought my headphones wouldn't be a problem at my desk. It works. It works and is cheap, but not my favorite for the purpose I bought it for.
👤Excellent headphone holder! I use this to hang my headphones above my headphones amplifier at the back of my desk. There is a The steel is very strong. It is very easy to install. I like the way the hanger rotates. I will probably get another pair of headphones. This is the best I have found before. I bought another one to see which one I liked the best. The other is made with plastic and takes up more space than the other. I'm sending it back. This is the keeper!
👤I use it to hold two briefcases. The Bag of Holding is from ThinkGeek and the large briefcase is from Saddleback Leather. Hanging them from the device keeps them out of the way of the robot. It looks better than any other method of storage I have tried.
👤I wanted to buy a single hook for my headset. I found a dual headphone stand and extra wide brackets. I don't have enough room on my desk to hang this hook. I need something to hang from the shelf. It is about 2 inches thick. The hook is perfect on the edge. I use the extra long arm to throw my headset on there. I know where to find my headsets.
👤I was worried that this might not hold up because my desk has a metal tube on the bottom side, and I needed something that was strong enough to hold two pairs of headphones. I've had no issues. The item I received is not the same as the one pictured. There are two small tunnels on the plane of the headphone-holding areas near the edges that you can cut out if you want to get a cable grip. It's too wide to hold regular 3.5mm cords, so maybe it would hold woven cords?
The package weight was 5.15 lbs. Easy access to your headphones. The long curved support is made of a soft, non-abrasive Silicone cover with a sturdy internal frame. A multi-purpose hanger. It's great for hanging cables, earphones and other gadgets. The max total weight is 1 kilogram. Clean and organized space. Installation is virtually anywhere - on walls, cabinets, glass surfaces, monitors, desktop towers, etc. You should organize and tidy up your workspace. Convenient installation. It uses double-sided tape for strong, reliable adhesion. Clean surface well using provided wipes. Allow the holder to be used for 24 hours. It is not suitable for use on wet, greasy or dusty surfaces.
👤It worked well for a while. One day, I walked into my room and heard a noise. I was trying to figure out what fell, but realized it was my headset. I followed all the directions after having it for less than 3 months. I pressed the alcohol wipes against the sruface to make the surface clean. After hanging it up, I made sure to not use it for 24 hours. It still fell despite all that. They need a better stand. I'll probably buy something to keep it. It was unfortunate it didn't hold up. There is a Customer service contacted me saying my previous 2 star review was detrimental to their reviews. They gave a free replacement. If they think the 2nd will hold up, I'll change the review. I'm not going to change my review if the second product does the same thing as the first. They asked me to send the email back to them, after they lost the previous messages. I did. They responded with nothing relevant to what happened before. I'll take it down to just 1 star now that I know their customer support isn't helpful. This isn't worth the headaches if you buy it from someone else. There are two edits, the first one is called Edit 2. I bought my own double-sided tape and it seems to be holding up well, so it's 3 stars. Customer support is very determined to make sure I like their product. I didn't use the new one because I was expecting the same thing to happen. If you rely on the glue, then you should buy any other glue.
👤I bought this item on December 13th. The stand has begun to separate from the glue. I was expecting this accessory to last as long as I thought it would. I had thought I would get at least 6 months out of it, considering the brand of glue they chose. I always took care to place things on it gently. The back of the rubber/plastic hanger and the desk it is attached to have begun to separate from the glue that is attached to them. The stand was rated 5 out of 5 for its function and 2 out of 5 for its longevity. Customer service was 10/10.
👤I used to get different types of L-shaped things. I changed my mind after reading reviews about people getting dents in their headsets. There is a This thing is awesome. Stick to a wall and it will hold up a heavy, wireless, headset. I attached one to a desk as well. I picked up a set of two for a very competitive price and was happy to return for more, and they were even cheaper. I can't say for certain, but I can say that you get your money's worth. There is a If you feel like you have a heavy headset and need more support, you can get a double-sided mounting tape. There's enough here to support 20 lbs of weight, and 3M makes the absolute best. The back is large enough to double the amount of tape holding up whatever you're trying to hang on the rounded mount. It's cheap for the amount you get.
Headphone hook holder products from Apphome. In this article about headphone hook holder you can see why people choose the product. Lamicall and Gamital are also good brands to look for when you are finding headphone hook holder.
Apphome, Lamicall and Gamital are some of the best brands that chosen by people for headphone hook holder. Find the detail in this article. Apphome, Eurpmask Choose The Color Of Europe and Eurpmask Choose The Color Of Europe are also brands that their products are worth to check.