The COZOO Headphone dock, Power Strip, and 3-Port USB Charger come with a 24 month warranty and 90-day money back guarantee. If there is a quality issue with this headphone rack, please contact them. The 40W 8A 5-Port USB Fast Charging Hub with Headphone holder, 6 Cable management hooks with stickers, 2 screws and screwdriver, welcome guide, 12-month and friendly customer service are what you get. You can either stick it or screw it. 6 cable management hooks are included for keeping cables neat and organized. It helps save space for your accessories. High-speed charging technology. The Quick Charge 3.0 port supports Quick Charge 3.0, which can be used to charge compatible devices up to 4 times faster than conventional charging. It is safe to protect you and your devices from overcharging. It is not a hub for a computer.
👤It works as expected.
👤Colocacin fcil, los puertos cargan a muy buena velocidad. O llamar la atencin con el led pues encendido.
It's suitable for most headphones, such as cell phone headphones, earphone, MP4 and so on, and can be used with diameter within 2.5mm and width within 4.5mm. Product has been upgraded. The under desk headphone holder can be used on desks up to 2in thick and as small as 0.2in for a universal fit. Save Space foldable headphone holder can be folded up when not in use. The rubber strip of the arm keeps it from folding. It is very easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or shelf from scratches. It's very easy to install a multi-purpose headset holder on a desk. It's great for hanging game controllers, cables and other gadgets. It can hold up to 11LB. The cable loop is built to prevent it from dragging on the ground or getting caught between your desk chair's legs.
👤I wish I would have started with this one instead of the ones I bought first. I used a cheaper one that used glue and couldn't find a good position for my headphones that were comfortable. You can't move them after they're stuck because they only come with 1 glue. There is a This is what I needed. You can change it's location very easily. If you upgrade desks. It folds up when I'm not using it. I like that it's strong. It doesn't fall or lose its place even after bumping into it. There is a It's large enough to fit my large cans and I've tested it with other pairs and there are no issues.
👤They don't mention that this thing is made of aluminum. I was expecting something plastic and was pleasantly surprised to find it was metal. I like the design of the fold-aways. I was hoping the cable holders would fit my headset, but they were too thick. Excellent, recommended.
👤Well made and foldable. There is a I used to use the forged straight angle headphones. There is a The model folds out of the way when not in use. There is a It has to notch through the string cords. It was perfectly engineered. I own a lot of top tier headphones and these brackets are a must. Highly recommended.
👤This works well. The metals seem strong. I wish there was more padding on the rest of the headphones. It's a good product.
👤I bought another style from the same store. It's decent for the price and is their house brand. This one is a better design and value. Highly recommended.
👤Exactly what I wanted. I keep my computer on my arms to keep it clear. I wanted to keep my headphones out of the way so I mounted something on the desk. This is sturdy and mounts easily. It flips up and down. I was very happy with the purchase.
👤This was everything I needed. It holds my headphones and keeps the cable in the headset for convenience.
👤This fits my needs perfectly. The little cutout for the headphone jack is awesome, and it is fastened nicely on my home desk. Everything is clean. Nice job!
👤Good quality. I use 4 of these to hold in place the 8mm glass sheet on my work table.
Stereo Monitor Input with Blend Control. The under-desk headphone stand has a 3.5mm AUX audio port and a simple way to plug in your headphones. The hub is not designed to charge devices. You can install it with a screw and 3M VHB tape. All over- ear headphones are compatible with Universal Compatibility. What? You get a COZOO Headphone dock with audio port, 5ft date cable, and a 30-day money back guarantee. If there is a quality issue with this headphone rack, please contact them.
👤While it lasted, this was a good product. There is a The quality of the glue is good. I had to add glue to the mount so that it wouldn't fall down since my Corsair headset wouldn't fall down. If you're using heavier style headphones, think about using screws or glue instead of glue. I bought this back in March of this year, but it wasn't until November of this year that I was able to plug into the bottom port. I would not be able to tell what was wrong unless I pulled the entire mount off and opened it. There is a I moved on. I had two working devices on this. I wasn't affected much. There is a I couldn't plug into the middle one. The off-set was obvious. This was just a headset mount. I was not happy. There is a I plucked out the module after priing it off. There are two versions of theusb, version 1.0 and version 2.0. The metal brackets and solder welds on theusb 1.0s were bent by the amount of plugging and unplugging. This is a piece of junk for me because I don't solder. You can see from the photos that theusb that DIDN'T break is a 2.0. Bigger house. Tougher. I'll be looking for that in my next mount.
👤The whole package is pretty good. There is a The unit, 3 foot extension cable, and 3 cable management hooks are what you get in the box. Holds my gaming headset, gives me 3 extra ports, and keeps my wires well organized. It has not fallen with the 3M strip. There is a I will be nitpicky just for COZOO's sake and mine. First of all. One of myusb ports is flipped. I can live with it. I wish I didn't have to remember the orientation to put it in. My cables are falling out. Since there are no circular catches to hold my cables in, I have trouble keeping them on. A new design will be implemented in the next iteration.
👤After a couple of years, this cheap faulty product stopped working for me, but before that, one of the ports stopped working early on, and it had issues like rapid disconnection/connection over and over again. I only used it for flash drives, not high power draws or anything like that. My policy is to contact the company to give them time to make it right before they leave a negative review. They told me that since they don't keep purchase records for more than 2 years, they couldn't replace this piece of trash. There is a I will steer clear of any and all COZOO products in the future, and recommend anyone that reads this to do the same, because this company does not stand by their products.
👤I didn't bother trying to mount this with just the strips. While the strips on mine were 3M branded and not especially heavy, placing and hanging headphones from it everyday is more than I'd trust to any glue stuck to the bottom of an Ikea desktop. There is a You won't be disappointed if you use the provided screws. After a month of solid use, mine is sturdy and not showing any signs of wobbling. There is a There's nothing to complain about with the headphones and hub. I'm getting full transfer speeds from my fastest cards, so the ports and cable are up to the claimed spec, using a UHS-II card reader. There is a The quality of the headphones jack is a nice surprise, as is the onboard digital to audio converter included in the hanger. It's not strictly speaking accurate, but it's loud and hot and is enough to power headphones with bigger, more power hungry drivers, like the AKG studio cans I use for video editing. It's not perfect fidelity, but it doesn't introduce excessive distortion or increase noise floor noticeably, and what's there is easily adjusted for in an EQ program. The sound quality and volume out of this thing was my biggest concern, and this is way better than I thought. All in all, very pleased and would recommend. It's not going to be as good as a dedicated DAC, but it is an all-in-one solution for mounting headphones on a shorter cable, a fast card reader, and a Windows Hello fingerprint reader.
Premium quality is made of aluminum metal. 60 days of money back is included in the Headset Holder Warranty. Double Headphones Hanger can hold two headphones at the same time, with a headband width within 2.1inch, such as a gaming headphone, children headphone, and so on. You can charge your smart device without a plug in wall with the 3 Port SmartUSB Charger. It can detect your device and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amps overall. The lights are RGB. The RBG Headphone Stand can display 9 colors changing effects to create an amazing game atmosphere at your preference, that can be selected by pressing a Touch switch. Great gifts for men and women. Fire-resistant and hardened plastic outer shell, build-in premium circuitry and microchip ensure device safety. A multi-protection system protects against overload, short-circuits, over-current and other charging issues. If there is a quality issue with this headphone rack, please do not purchase it.
👤It's a nice idea, but it doesn't live up to the potential. Is a decent job holding on to the desk, not sure if it will take too much weight. The lip at the top is not more than 1/2 inch. There is a flaw in theusb C port It won't register as charging my phone, but it will charge my ear bud case. I didn't return it because of that. The swap for a better power supply didn't help. It doesn't provide enough power to the port. The charging cable on the A port does not generate enough juice to quickly charge my phone. Pressing and holding the button will shut off the light.
👤I am always on the phone. It's helpful to have a place to hang my headset in my desk. There is a I like that I can charge a few devices here. There is a I don't like the fact that there is a circle of light on the front. The light is in motion. If you have this in an area where you sleep, it could keep you awake. The light show could make you sleepy. I'm not sure if it works that way, but I'm trying to see the bright side. I made a new year's resolution to be more positive.
👤There are no options for one color or different modes in the RGB lights. I don't like them but the rest of the things are very well made and I have to give it 5 stars. The hub is nice. I mounted it under my desk because it was strong enough to handle. It's under my desk to hide the mess of wires.
👤If it fell down immediately or within 20 minutes of installation, it wouldn't be possible to hold onto the table and plug in to the wall at the same time. If your space is set up just right, you're good, but other than that, good luck! I felt like the item was false in the description.
👤The convenience factor is great. The attachment screw is set up to be too close to the brackets, which is a manufacturing defect. Result: The cheap plastic cap on the end of the screw makes the device slip off with the smallest of movements, like hanging a set of headphones.
👤I own a few pairs of headphones. A mic and tooth for my phone. I think they fit on my desk. The unit is held sturdy by the clamps. It is handy to have both the 2 and 1 charging ports. The light is funky. It would be nice to have the option of turning it off, but I can set it to whatever color I want or let it spin through the various colors. I am very happy with the purchase. It gets my headphones off my desk. I highly recommend it.
👤It's a great addition to my set up and helps me keep my headphones organized. I love that the lights can be turned off and that the extra outlets are clutch. I have been using it for almost a month and it has never moved. The plastic feels cheap but I can't complain about the price.
If you care about compatibility, style and quality, this gaming accessories is the best choice. It's a great gift for your kids, gaming friends, boyfriends, etc. All in one design, under-desk headphones stand, 3usb charging hub and 4A-20W. Can hold two sets of headphones and keep your headphones out of sight. 3 Port SmartUSB Charger:Detects your device automatically to deliver its fastest possible charge speed up to 2.4 Amps per port or 4 Amps overall. TheSafe Guard is a fire-resistant and hardened plastic outer shell that is built-in premium circuitry and a chip that ensures device safety. Quality Gourmet provides a 90-Day Money Back Guarantee and a 24 month warranty that will ensure you a hassle-free purchasing experience. If there is a quality issue with this headphone rack, please contact them.
👤Great idea and concept. Didn't find anything else like this. The included wire management tie down clips were helpful. The wire holding cutouts on the parts are very nice. I like the monocolor of the grey outputs that came with mine. It takes a bit to take off with 3M VHB tape. The power line runs below the unit, which would make wire management easier. You can see what I mean by looking at my photo. If the cable ran through the back, it would have been a cleaner look. The power cord is a tad short, as many other users pointed out. It fit my setup well, but I wish it was longer. Great product, all in all. This is definitely an improvement over the previous ones, as it was from a regular under the desk headphones. Would it be interesting if they had a version of this that was not powered so you could connect it to a computer? It's helpful for people with headphones that have ausb type.
👤This is a review for something. Skip the other headphones. You will get more bang for your buck with this. Way better than those overpriced headphones. Get this. You get a better quality hanger and also a charging port for your devices. The price is almost unbelievable when you consider that you don't get cable channels or a portable charging device. What I like. There are two headphone hangers. There is a There are cable channels for earphones. There are threeusb DC chargers! There is a Double-sided or a more permanent screw mounting is what you should use. Includes hooks for tidier desks. The packaging is gorgeous. There is a good separation between the headphones. Inexpensive. Not braided cable is what I don't like. There is a power cable. The power cable is at the bottom. The package has a headphone hanger with pre-applied double-sided tape. Extra double-sided foam tape. There are two screws. Three cable hooks are under the desk. There are printed materials. If you decide to mount using that option, you might need to change the double sided tape on your desk. I highly recommend this product, it has 5 stars out of 5. Hit the comments. This review is for something.
👤It works well. Even when I have my beats headphones, gaming headphones, and watch on it, it's very sturdy. There is a I don't have to worry about how fast it charges, it will work if I use 3 ports at the same time. It will charge on and off at will. I usually charge my devices and watch them at the same time. I'm not sure if it's because of the ipad pro or not.
👤One of theusb ports decided to self destruct. Quality is questionable. Contacting MFG to find out how customer support is. Good quality. The mounting screw-hole would have been blocked if the power cable had been oriented facing backward. A power cable would have solved this issue. The loop is not very noticeable when you mount it back from the desk. The product functions as intended. I wish this had at least one plug.
The under desk holder is made of high quality metal and is strong enough to hold two sets of headphones at the same time. It is easy to fit different table and shelves or any other horizontal panel with the bee stand, it sticks firmly under your desk, and it is also strong and easy to install. The cable mount design makes it easy to reach your headphones, keep your desk tidy, and hold the gaming/wire headphone cable. Installation is virtually anywhere - on walls, cabinets, glass surfaces, monitors, desktop towers, game consoles, etc. There are multi-purpose hangers. It's great for hanging game controllers, cables and other gadgets. 1. Before attaching, clean surface well with provided wipes. Allow 3 Before using the holder, the M glue needs to be set for 24 hours. 3. It is not suitable for use on wet, greasy or dusty surfaces. 3 year warranty is ensured. Professional technology team and 24 hours customer services.
👤The headset hanging on the hook is not to scale. It's a bad job that makes the size of the hanger appear smaller than it really is. The text on the bottom of the photo says "New Bee". I was looking for a hook with a minimalist appearance, but instead got something with a ridiculous brand name printed on it.
👤I decided I needed a place to keep my headphones out of the way. There was an alcohol wipe, 3 screws, and an extra sticker. I was able to hang my HyperX Cloud Stinger and Sennheiser headphones on it without any issues. If you have cans with a wide headband, I'd be careful to check if they fit on this. I like the small notch on each side to hang the cord so they're not just on the floor. There is a If you're using the screws, mark the screw holes with a pencil and line up where you want this to go first. Before you make holes, you need to take the screws out and screw them in. The screw holes are blocked by the hooks, so it will be a lot harder to start.
👤The thing is 5 stars for money. It is easy to install. I used the strip that is made from the same material as the one you need. I screwed in the 2 screws to make sure it sticks. The only criticism I have is that the lip is too short. I have attached it to a HifiMan Ananda which stays put since it has some weight on it, and then I have a cheapo Sennheiser headset for conferencing. The headset is easy to knock off into the floor. It happens all the time, so I don't replace it on the hanger anymore. A little more lip on the end would probably solve that problem. If it was longer, the big headphones wouldn't cause it to fall off.
👤This is what you should expect from a $10 hook. The metal is strong. After about a week of use, the hooks are still wide enough to hold my headphones and headset. I took one star off because I understand that it is difficult to get the screws in. The hook blocks your screwdriver from being able to insert the screws straight on. I used a drill bit to get the screw-holes started, and then used a long screwdriver to get the screws fastened at a 45 degree angle. It's not completely flushed, but it seems to hold up. 5 stars if you have the right tools.
👤I bought this to hang my daily driver, the Sennheiser HD6xx, and my daily driver, the Sennheiser HD579. It was easy to install and work well. The desk I use for my computer is a basic Ikea desk with a wooden top and 4 legs. It was easy to get the screws to go into the material, and then hold the desk tightly with the help of the glue. They give you a second glue so you can remove the screws and re- apply the hanger to another location. This thing is a steal and it works as well as the other ones. If you have two headsets, I recommend you grab this one. 5 stars!
It's simple and elegant, and makes your headphones well-displayed when not in use. Make your desk tidy by freeing up your space. The Silicone pad and aluminum headset stand are made of anti-scratch material. Two mounting methods with a strong Adhesive tape or 2 screws are easy to install and look good in any setting. Headphone hanger mounts can be used on a wide range of surfaces. There are under desks, tables, shelves, wall cabinets and shelving units. It's compatible with all kinds of headphones, such as wired headphones, wireless headphones, children headphones, gaming headphones, TV headphones and so on.
👤I use this to hold an Arctis headset. It hangs in front of the tower because it is attached to a desk. I didn't use the glue. Pre-drilling holes into the desk is recommended if you are attaching with screws. I like the subtle shape, the slight grip of the silicone pad, and it could comfortably hold a headset larger or smaller than mine. There is a The flat plate on the top of the desk is something I would change. I would like to see an alternate model that was larger and more similar to the one on the desk. You install the two screws, then slide the mount on and pull it forward. If you put it from the front you risk it sliding off the screws. It's not a big deal. It's not an optimal design choice, I see why they made it that way. There is a I'd buy it again if I needed a similar setup.
👤The screws broke. Not my fault. There is a The design makes it difficult to get the screws into the desk. The screw tip fell off after the holes were set. It was so weak that it broke into metal powder. I show photos. I had to dig into the wood to get the screw out of my desk. I show normal screws for comparison. The screws are narrow to get the mount to work. I gave up trying to adjust my other screws after about 20 minutes because they were too large. I would use glue, velcro or glue and glue over the garbage mounting options they give you. There is a The rubber part covering the hook is of good quality. Good quality is probably the only thing that's good in the unit. The metal is painted so lightly that it will chip easily. I scratched one side before putting tape to cover it, like I screwed for 2 seconds. If you want to install screws, please put tape on the edges to avoid scratches, but you can use a Sharpie or paint markers to touch it up. I don't think the metal will break like the screws. They dress up to look nice. The reviews here are not critical of what you're actually getting. It would cost about 10 cents to make in China. It's a better design if you want an under the desk hook, not on the side of the desk. I would have returned it for the poor quality if it had cost more.
👤It was really solid. Glad they use 3m tape, it works better than most others. I attached it to 2 sides and it barely moves, so I can put a lot of force on it. I use padding around the band. It fits with what would be recommended. The desk is black. Make sure you clean the area before applying and if possible mount in a corner where you can take advantage of both mounts. When mounting, make sure you press down hard. Press down on the flat surface to make sure the mount is properly adhering to the headphones hook. Many people forget to do that with 3m tape.
Promise 100% satisfaction: 6am is very important to customer needs and satisfaction. 60-day money back is promised. They are confident in their products. Please contact them if you have any questions. The dual headphone hook design makes it easy to reach your headphones and keep your desk clean. The living room, bathroom, closet are some places where this headset hook can be used. You can hang items with it, such as clothes, towels, bags, headsets, hats, belts, etc. The modern black color is very similar to several types of home styles. This headphone stand under the desk is easy to install, you can tighten screws with aPhillips screwdriver or use an electric drill to lock screws into the desk or cabinet surface, sturdy and durable, or you can attach and press with force. The headset hanger is made from high-quality aluminum alloy and has a speciality of heavy-duty, rust-proof, scratch-resistant, and durable to hold two sets of headphones simultaneously. The raised end of the headphones keep them safe from scratching and dropping. The headset holder is made of sturdy aluminum alloy and can hold a variety of headphones. The APPHOME Headset Holder has an 18-month worry-free and friendly guarantee. You will also get an extra glue and two screws.
👤I got this particular one because it said that it had screws. I wanted to make sure that I could fit the backpack and headset into my desk. It is impossible to fit a standard screwdriver or drill in between the gap in the base and the hooks because the hooks are as wide as the base. I had to do a lot of McGyvering to get this thing attached. It seems like it's sturdy now that it's attached, but it's just a garbage design when it comes to ease of installation.
👤I'm very happy that the hook is staying up. It was frustrating because I stuck it up with the glue and it kept falling off. I tried the new one after taking the time to remove the old one. It's stayed up since then. My kids use it and are not gentle and it has been up for a month. Having a place for their headphones is great. I keep it by the charge so they can charge it. Love it. I'm glad I didn't have to use the screws.
👤I put them on the metal legs of my desk. Even though the desk was brand new, alcohol was used to clean the legs. I attached it and let the glue set. I put the cables on it. It was on the ground a few days later. Came right away. The glue doesn't hold. I am happy I did not put something expensive on it. Disappointed.
👤The hook and the glue are strong. I didn't have to put it in the desk. The time was quick and easy. I have no issues with my headphones hanging on the hook. The item was a great purchase.
👤Something has to be way above and beyond for me to write a review. This is solid aluminum and it's cheap. You can't wear it out or break it, and it looks great for 7 dollars.
👤The table was placed under the gaming chairs. We were optimistic that it would work after many broken headphones. It is very easy for the kids to hang the headsets on there and it is very sturdy. We didn't think to do this sooner. Highly recommended!
👤It seems pretty sturdy. If your headphones are heavy, I might drill it in if I get bored. The issue you should be concerned about is your headphones hook. I have two headsets: my oculus rift headset and my Logitech g930 gaming headset. Not worried at all.
👤This item was used to get the headphones off of the desk. Great purchase.
The dual Headphones Hanger under the desk can hold two headphones at the same time, with a headband width within 2.1inch. The rotating neck of the headphone arm allows it to be used as a storage option for heavy headphones. For a near universal fit on most desks, the Clamp can be as narrow as 5mm and as thick as 50mm. It is easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or table from damage. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.
👤I transitioned from a regular desk to a standing desk and I love it! There is a I bought the Anti Fatigue Bar to stand on so I can work on a stand up desk. I bought a dual stand under my desk so I can hang my headphones when not in use. It's very easy to install on a desk and it's very sturdy, but I like that it rotates so I can tuck it inside the desk rather than have it stick out. Absolutely nothing! There is a 5 out of 5 stars! If you need to hang stuff for storage, such as headphones, book bag, and anti fatigue bar, I highly recommend this. It's strong enough to hold anything. There is a Hope this was useful. If it was, please click on the button below. Thank you!
👤The design is subtle and easy to install, and thepadded hooks can be adjusted to your desk. There is a If you have a thicker desk, you won't have much clearance for your headphones. This was used for our headset. The hooks aren't adjusted to go lower than the C clamp, so it barely fits under the desk. I thought it would be bigger and longer because of the reviews. Would not be possible to fit 4 quality headphones on here. I thought my headphones wouldn't be a problem at my desk. It works. It works and is cheap, but not my favorite for the purpose I bought it for.
👤Excellent headphone holder! I use this to hang my headphones above my headphones amplifier at the back of my desk. There is a The steel is very strong. It is very easy to install. I like the way the hanger rotates. I will probably get another pair of headphones. This is the best I have found before. I bought another one to see which one I liked the best. The other is made with plastic and takes up more space than the other. I'm sending it back. This is the keeper!
👤I use it to hold two briefcases. The Bag of Holding is from ThinkGeek and the large briefcase is from Saddleback Leather. Hanging them from the device keeps them out of the way of the robot. It looks better than any other method of storage I have tried.
👤I wanted to buy a single hook for my headset. I found a dual headphone stand and extra wide brackets. I don't have enough room on my desk to hang this hook. I need something to hang from the shelf. It is about 2 inches thick. The hook is perfect on the edge. I use the extra long arm to throw my headset on there. I know where to find my headsets.
👤I was worried that this might not hold up because my desk has a metal tube on the bottom side, and I needed something that was strong enough to hold two pairs of headphones. I've had no issues. The item I received is not the same as the one pictured. There are two small tunnels on the plane of the headphone-holding areas near the edges that you can cut out if you want to get a cable grip. It's too wide to hold regular 3.5mm cords, so maybe it would hold woven cords?
The under desk mount is convenient for storing. Easy installation of a springed C Clamp. For a near universal fit on most desks, the Under Desk Headphone Hanger is used. It can be lain flat on the wall when it is not in use, folding or expanding at your convenience. It is easy to remove and re-attach the screw. Soft rubber pads located on both ends of your desk or table protect it from damage. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers, shelfs etc. It's great for hanging game controllers, cables and other gadgets. The TV stand does not have room for the soundbar. The sound bar width is less than 2.1 inches, it is 5 lbs and there are two racks to support it. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.
👤My TV stand doesn't have room for the soundbar so I used two racks to hold it. The sound bar is 5 lbs heavy and supported by two racks. I'm happy it worked out.
👤I'm glad I chose this one because there are so many different models to choose from. It has a heavy, solid feel to it, and it has a nice padding on the arm so it won't damage the furniture. It folds up when not in use. Great product! I am an actual consumer, not a fake reviewer.
👤They are very well constructed. I attached them to the end of the stand that holds my TV. I put my sound bar on them. The sound bar is small enough to fit on them, so they can hold it in front of the TV. The sound bar could not be held on the TV stand because there was not enough room.
👤This thing is perfect. My boyfriend's desk has a small lip on the sides that hangs over the sides, but it is a vintage metal desk. Since these holders are mostly designed for desks with empty space below, I had to search through a million to find one that didn't require so much depth for the tension screw. It works great after finding this one. It's easy to install, but will still hold a large clunky headset. The photos have accurate measurements.
👤There are three people working from home, one of them is a gaming son. I'm running out of places to put my headsets, my son has a gaming headset, and I've got my headset for Teams. This particular hook is unique for a couple of reasons. I like the metal construction. It blends in with any black furniture or decor. If it happens to be in a high pass area of your desk or table, the folding design will allow you to get it out of the way. The ability to adjust the orientation from a vertical to horizontal one was a feature that made this a definite purchase. My desk is made of wood and metal and has a lip on it. The standard vertical style brace clap design is useless because it is short of the height of the table. I can't use boom stands with this table because of the other accessories I have. The only thing I had to do was remove the two allen screws and attach them to the leg of the table. It is now a permanent fixture. A huge problem was solved when I reached for my headset. I bought two of them for work and one for home. A great buy.
👤I always remain objective and honest when reviewing products. I always review with information that I feel others would like to know about the product, as I always assume what I'm writing will affect the purchase. I try to go beyond surface characteristics and input into quality, value and application. I will always end the review with an answer as to whether or not I would purchase the item again, which I believe is the most critical question pertaining to the item. Let me know if you want me to review your items. I was looking for a cheap hanging solution for my headphones and this product was the only one I could say anything about. I usually have my headphones on, but it can flip up when not in use. The screw base makes it easy to use for different sizes of desks. I'll probably buy another one for my daughter. It's a very handy device, serves the purpose well, and is cheap, but sturdy. You won't be disappointed.
The dual Headphones Hanger under the desk can hold two headphones at the same time, with a headband width within 2.1inch. You can charge your smart device without a plug in wall with the 5 port smartusbcharging unit. It can detect your device and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amps overall. You need to use different ways to hold your under desk, so come with 2 screws and 3M VHB tape. Please clean and dry the surface of the desk and stand before you install it. Wait 24 hours before using. 6 cable management hooks for keeping cables neat and organized are included in the cable organizers. Saving space for your phone and headsets is helped by it. Can hold two sets of headphones. The arms are not the same. Their promise is to make sure you are 100% satisfied with your purchase of their products. They will give you lifetime warranty service if you have any questions. You are both a customer and a friend.
👤This is very nicely placed under my desk. I don't use screws because the tape looks strong. It supports my headphones. There is a The side wings have a notch on them. It saves space and I don't have to have a headphone holder. There isn't a way to turn off the blue lights. Overall 5 stars.
👤I have a tv stand above my couch that makes it hard to charge my phones and controllers. The kit does a great job of charging my equipment. I used screws instead of tape and it was easy to install.
👤An amazing find. I used 3m double sided tape. It does come with some tools to set it up, but mine didn't damage it. I like it. If you're looking for a way to charge your items without having to use an outlet, then buy it. I wire managed it, but it is not a brick charging point. A long cord is attached to the item.
👤I bought this stand to keep my headset out of sight. I used the screws that came with it to attach it to my desk, so I can't comment on the strength of the 3M tape. It's made of plastic and doesn't feel weak, but I'm afraid to hang up my headsets. It comes with a screwdriver, brackets to help guide the power wire in place under the desk, and double sided tape for the brackets. The built in ports are nice, but it would have been nicer to have a few more ports.
👤I like this thing. It keeps my things out of my way all the time. Everyone always needs moreusbs at your desk. The screw brackets and sticky tape are pretty good. I used double sided tape because I was skeptical if it would stick in the middle of the night. It seems very sturdy for the price. Would recommend. Everyone with a computer needs one of these.
👤I used to have a small extension cord with 3usb drives that I used to charge my phone, headphones, watch, and other things from, but I was short of the 3.0 rapid charge. The device solved my issues and gave me a place to hang my headset. The wings are barely big enough to fit the headset, and they seem a little flimsy.
👤The unit is described on Amazon. I was surprised that the box was not sealed when I received it, as I thought it had to be. Some of the 3M tape was bent up, but still applied. Time will be the most important. I plan to take my devices out of use after being charged. Rather be safe. There is a My desk is cleaner because I have a place to put my noise canceling and headsets. God bless!
👤The "wings" that hold a headset aren't long enough to hang anything from, and it doesn't attach well to my power strip. Does not help with cable management. Disappointed in the work.
Headphone hook under desk charger products from Zotech. In this article about headphone hook under desk charger you can see why people choose the product. Loiion and Cozoo are also good brands to look for when you are finding headphone hook under desk charger.
Zotech, Loiion and Cozoo are some of the best brands that chosen by people for headphone hook under desk charger. Find the detail in this article. Kafri, Cozoo and New Bee are also brands that their products are worth to check.