Cut the hassle of reducing pop sounds with Clear Sound. It has a double layer of mesh to ensure a smooth recording. The mic pop filter has a sturdy gooseneck holder that allows for a simple set-and-forget placement. It is easy to install, just attach the bottom of the mic filter to the microphone, adjust the holder to fit between the mic and sound source, and record away. The microphone filter can be used for singing, voiceovers, podcasts, vlogging, and anywhere else you need crisp, quality sound. Sound Necessity: If you are a singer, vlogger, voiceover artist, or host, you want your voice to be heard. The mic filter is a great gift because it helps block any hisses, pops or thuds and is essential to creating professional content.
👤I'm happy with my Auphonix Pop Filter. The Net Success Group has been professional. Excellent communication with them. The filter was in very good condition when it arrived. It is a good product. I bought a microphone. There are better reviews with more details. I want to add that it is not true that the Blue Yeti is hard to put on. The Auphonix 6-inch Pop Filter can be put in the Blue Yeti if you use your hands. Does that sound like something out of a movie? The filter will not put it there automatically. It is very simple to do the work with your hands. There is a If you put the filter carefully, you can sit the microphone completely vertical and move it as you please. There is no problem at all.
👤I have been using this thing for about a week now and I can honestly say I don't like it. There is a The filter part is decent, but I am constantly wrestling to get it to stay in position for more than two seconds, even though it does what it's supposed to. The pop filters fall to my desk away from my microphone when the goose neck part of the thing tries to remove from the base. The goose neck part won't hold the shape I want, won't keep the distance from the mic I want, and won't be able to bend the goose neck so that it'll rest where I want it to. There is a It's probably value for money, but not when I'm going to have to buy a different filter that will stay put.
👤The thing fell apart after being opened gently by cutting around the edges of the packaging. The quality of this is the same as any other cheaper pop filter, that may not fall apart on you out of the box. I glue it together as each side didn't seem to snap into each other and while it does diffuse air the way it was meant to, the metal arm always had a little bit of sag to it after positioning. I went with a simple, over the top cover for the yeti that works wonderfully, and the plus side is that there isn't an arm I need to position or worry about, and it's less in my field of view. It's the same thing. Does what it needs to sound, and the metal arm is fairly stiff to hold its position when set. I think an actual mic cover is a better choice.
👤There is not much to say about a pop screen. I bought this along with my mic and it works well. You know what? Most pops are stopped by it. Yeah. It does what it says. Which is nice. For the first time. There is a My show sounds great. At this point in time, I have recorded half a dozen episodes of the Unified Republic of Stars and it shows no signs of tiring out. That's quality. There is a There are a couple of notes about it. It works well to the Yeti's stand. You'll probably have to play with it to make it fit. It's only a few minutes out of your day and you're probably not making money off what you're doing anyways, so what's a minute or two? There are two more It doesn't stop lip smacking. When you record, listen for it. If your lips are wet, there is a small pop between words where you press your lips together. A linguist? It's small and probably not audible except to the person recording. It would be worse without this filter. Look for the little blips on the waveform. You know... lip balm. It's a good idea to put it a little less than a handwidth away from the mic. Unless you like rubbing your lips against the filter. Yes... It's not something I enjoy. I think less saliva might make it last longer. I bought a one-pack and it seems like it's enough for me. If I find it falling apart after a few episodes, I'll report back. There is a There is a bonus ebook. Not much extra. Didn't tell me anything I didn't know. I've recorded things before. It could change the way you think about audio. Or not. It's up to you.
The Quality Guarantee is -1. If you have any issues with items, feel free to contact them via email. Plug and play is possible with the data port, no additional driver is required. It's ideal for conference, distance learning, streaming, chatting, recording, and other things. This mic has a cardioid pickup pattern that captures the clear, smooth and crisp sound in front of the microphone and suppresses unwanted background noise. It can be plug and play, without any assembly, if you unfold the three-legged stand directly and adjust the pop filter. The shock mount can be attached to a boom stand with a threaded insert. There is a note. The female to male threaded screw adapter is needed if the stand comes with a threaded insert. What you get is a microphone with a power cord, a foldable tripod mic, a mini shock mount, and a manual. It is not compatible with the console.
👤The video shows the sound quality of the microphone. I think it is very good for this price range. Even though the price is higher, I can't tell the difference in sound quality. There is a Plug and play is one of the pros. Pop filters have great sound quality. It was shock absorbent. If you don't want your computer to recognize it as an input, you will need to unplugged it.
👤The sound quality is not good. I hear sound. I have to plug it in and then switch it off. I will be purchasing something else. I don't recommend. There is a There is an update. I contacted customer service after my first mic did not work. They sent me a new one. I would purchase again.
👤The microphone is good for the price. I had to plug the microphone because of the sound quality and noise reduction. I would definitely recommend it. Very happy.
👤The review was written by Caitlyn's husband. The crappy sound quality of the microphone I was using was holding me back. My wife surprised me with this after weeks of complaining about having to use my headset microphone. She did a great job. I might keep her. It was very nice and well made, and my first impression was that. It seems like it will last a long time. There is a The sound quality is amazing. You have to mess with the settings and find the right one for your voice. My voice sounded clean, balanced and PROFESSIONAL after doing this. There is a All background noise was eliminated with my settings. My viewers can no longer hear my wife nagging me when I play too long. It is worth five stars for that alone. There is a It was easy to set up and the customer service is great. There is a If you're looking for a mic for streaming, I recommend you buy a stand that's on the side of your desk. The closer your mouth is to the mic, the better you will sound. There is a The conclusion was high quality. The cost was a reaction to it. It's the best bang for your buck.
👤The mic arrived in a sleek box. There is a The instruction manual was in front of the box when it was opened. It provides detailed instructions for setting up and connecting to both Mac and PC operating systems. It comes about 80% assembled, all you have to do is put it on the pop filter and windscreen. Plug in and go. There is a The tripod is easy to fold into a position. There is a mic in this picture. It's not too fancy, but it seems fine. There were no additional bands included. There is a The pop filter arm is too short to get the best position in front of the mic capsule. You can find a position that is good. To the microphone. I had to maximize the input volume levels in order to get a decent sound level. It increases the likelihood of background hum when you do that. I did a small amount of testing away from the mic. The pickup volume was almost the same between 12 and 18. There is a trace amount of hiss/hum present. It appears to be a standard cardioid pattern, which captures what's in front of it and slightly to the side. This microphone is good for working from home to increase audio quality on video and audio chats, if you sit more than 18 inches from the mic. I wouldn't use this for a multi-person conference call microphone. It is a good price. There is a I wouldn't go this route for musical applications as the sensitivity isn't high enough for the distance needed to play those instruments.
Caliber: 0.38 inches. The material is made of high quality foam. It improves the recording quality by reducing unwanted noises. There is a feature. The foam cover can keep your microphone clean. Application for small microphones. It's suitable for both indoor and outdoor venues.
👤I lost the original microphone windscreens for my head set, and my mic was picking up more wind noise without them. These fix the problem. It is at a good price. The fit for the Sena 20s boom mic is snug and should work for other mics as well.
👤These are just mic "wind" screens, so you aren't blowing onto or having wind issues from your mic coming across to either your live stream or your mic chat to teammates, or chat in general. This is the best value I have seen. 15 sounds like a lot. You would be amazed at how many couches, recliners, and game chairs a cat can eat. They are a hazard to small kids and pets. There is a If your kids or older brother or sister want to use their headset or mic, you won't need a refill for a long time.
👤It was smaller than expected. The goal is thin and easy to rip. It's not good for the headset mic.
👤These were cheap and small to replace the crumbled wind screen on my microphone. I went shopping for something that would work because an exact replacement wasn't available. The hole in the screen is small enough to slip over the mic element. Wind screens that fit larger mic elements are too large to fit securely on my setup, so these are the way to go. The mic is in the center of your voice, so even if there was some foam in it, it wouldn't have much effect. 5 stars.
👤The foam wind screens work well with the headset. The newer headsets have a microphone. It wouldn't fit. They do a good job. If one wears out there is always the next one. It did not wear out so far.
👤I have a small fan on my desk that I can't use when I'm on conference calls because of the wind noise. I put a fan on my headset so I can use it for calls and chat without the wind blowing the microphone all the time. I put one on my headset and it worked great.
👤I bought my first windscreens from Amazon and they were too small for my gaming headset. The mics are snug so they won't fall out. I don't know what I'm going to do with the other 14, but I think this is a good buy because it blocks the wind noise my mic was picking up when I had my fan on. The package will be as thin as a few pieces of paper. If left alone, it will puff up to normal cylinder size in two days.
👤The opening is generous to go over different size bases. It's in place too. Due to the Pandemic, disposable mic covers were purchased to deal with sanitary needs. I got these in bulk. It does not harm noise canceling or improve it.
The buzzing noise is caused by ground loops which happens when the audio source and the speaker use the same power source. The principle is to eliminate the current noise in some car speakers and home stereo systems. Plug and Play is a nifty little device that plugs in. It works with any audio device that has 3.5mm audio jacks. The AUX Jack in the car can be connected to the ground loopisolator to eliminate noise. Good quality sound will be enjoyed when you use the Ground loop noise isolator.
👤The noise isolator was the perfect solution for my humm issues when I was connecting my unbalanced Rodecaster Pro to balanced equipment. It's so easy to use. Plug and play! The noise was being created between the two systems. Not just for car audio. It got a strong five star rating from me and my honest recommendation, considering the super-affordable price and the fact that it did exactly what I hoped it would. No need for expensive noise eliminators. Try this first before your wallet is ruined by high-priced gear. There is a If you found my review helpful, please let Amazon know by clicking the "helpFUL" button below.
👤I had to get rid of the constant humming because the audio jack from the mixer and the projector need to stream zoom at the same time, so I had to use a laptop to do it. I found sound loop isolators as a possible fix after searching online. I settled in this product because I didn't want to spend a lot more on audio equipment, I already spend a lot on it. I could but be happy. The annoying humming feedback was gone after I plugged everything else in. I wasn't sure if it would work because it looked so small, but I'm glad I was proven wrong. I will recommend others to them if I need to. 5 stars from me.
👤This will work well for the casual user. I had an issue with a ground loop in my stereo amplifier. There is a I measured the plots on the HP 8903B Audio Analyzer and found that the low frequencies are quieter and the distortion is much flatter. There is a I like the product and it didn't introduce any of hiss at 8k+, so I would recommend it. It gives you what you pay for. There is a It is also 180 out of phase. See the photos.
👤Over the years, I have bought 3 of these. A low cost transformer is inside. The grounds of the source device are isolated from the amplification device. I connect computer audio output to high quality monitor speakers. There is a There is a small amount of bass loss. I boost it back up. If you increase the output of the source by a lot, the transformers will start to saturate, so just keep the source gains down and turn up the speaker input gains. Now that you have isolated the speakers with this device, the background noise will go down a lot.
👤The hum and buzzing from my external speakers connected to my laptop were worse after trying different speakers, different cables, and placing the device closer to the speaker, than before. The money was wasted. I think I should count my blessings because it has become less frequent for Amazon to deliver on time.
👤This info comes from a career audio engineer who has been searching for a product like this for a long time. This product did not change the sound or volume of my input source. There is a Many of you have experience with the grounding problems that are not limited to simple car audio. I experience these issues on a daily basis in my work. The Ziocom Ground loop noise isolator performs exactly as it claims. After placing the passive device in line with the "aux" cable and headphones, my grounding issues were solved. No more "whining" sound during acceleration, and no more "data bleeps" when my phone is connected to my car, home stereo, or any of the professional sound systems I use on a regular basis. There is a I have found that the shorter "jumper" aux cable that is provided to plug from the device can be a problem, so I simply use a different cable and make sure to have it in a position in which it won't be under any strain. This is the only reason for the star rating. There is a It is a cheap and easy solution for a common problem. If you have a problem with your product, the seller can replace it. There was no sign of loss or a reduction of bushes.
Lapel microphone windscreen can protect the microphone from dust, humidity, and human saliva, allow you to use the mic in an ease and comfortable mood, prolong the lifespan of the microphone as well as maintain personal hygiene for professionals who share devices among their associates. The headset windscreen is made of high density foam, which is particularly effective in reducing wind interference and unwanted noises caused by talking or singing closely into the microphone, as well as reducing wind noise when using the microphones in outdoor applications, perfect improve recording quality. Most standard microphones have a design for it. 10 pieces 1.2 x 0.9 in ball-type foam mic cover, made of lightweight yet dense and acoustically transparent foam material with good flexibility, strength and tear-resistance, elasticity and shrinkage, is convenient to set on the microphone caliber. If you put the microphone in warm water for 20 seconds, it will return to its original shape. The lavalier microphone windscreen can fit a variety of headsets with microphones, such as gaming headsets, office telephone hands-free headsets, fitness class headsets, aviation headsets, motorcycle helmet headsets, hearing protection headsets, some voice recorders, podium microphones, and many others. The covers were squeezed in a bag and have good elasticity. It will take some time to get back to its original shape. Their 7* 24 friendly customer service for peace of mind is what you get.
👤It was almost. The description said that they would work on headsets and microphones, so I bought them for my Blue Parrot headset. The opening is larger than the one on my Blue Parrot 250XTS headset, so it falls off of the microphone, even though it may fit certain headsets. The wind blowing right up and into the larger diameter hole would most likely cause the distortion that I'm trying to eliminate, if I had a bit of glue on the end. There is a I guess I'll keep looking. It looks like a decent product for a decent price. It won't work for my application or most other headsets. It's really sad...
👤My children ripped up my HyperX Cloud mic foam and needed to be replaced. I understand why I can't find packs of multiples because of the cheap covers. The covers barely fit over the mic, but with some effort I got it over and it didn't rip along the way. It's tight on this mic, which is probably bigger than typical, and that's my only gripe.
👤One of my callers told me that I sounded like I was speaking from a boat in the ocean when I sounded like I was talking to her, because I had a fan blowing air in front of me. I didn't know these existed but I bought them and attached one of the mic filters to my mic and later found out that my co-workers couldn't hear the fan noise anymore because I still had the fan blowing air in front. You can get a lot of these filters for a small price.
👤I use 8 hours a day for work, so I ordered these. They were a piece of paper. I was able to open the package with a pen in the end after I removed the one that was in it. It slid over the microphone. There is a It slides right off, just as easy as it slides on, and I knocked it off several times while adjusting the microphone. My solution was to cut a piece of 3M Command Strip and put it on the end of the microphone and slide it over it. It stays in place now.
👤They seem to be invisible during land and web calls. They were completely flattened by a quick soak in warm soapy water. The length covers mics on the front and back of booms, so they stay in place. 10 may be over the top, however, price dictated logic over comparable price from competitors. An updated entry will be added if the time is right. It is recommended.
👤These are amazing. My boyfriend uses them on his Astro A50s and they fit perfectly on the mic piece. His old one came off and the dogs chewed it up but we don't have to worry about this one falling off it's perfect size and all his friends say there is no more wind noises from the AC in the room It was perfect. If you get many for $5 or less, you will get the best quality.
The noise isolator is used when the audio source and the speaker use the same power source in some car speakers and home stereo systems. You can enjoy clean and clear music and audio by eliminating the current noise in some car speakers and home stereo systems. Works with any device that has a 3.5mm jack, even if the grounding issues persist. You could also use a car kit with a home stereo. Being mini, portable and light, plug and play, no battery need or button, all you need to do is to plug in the ground loop isolator. Plug and play is portable and light-weight. The package contains a user manual and 3.5mm audio cable.
👤No idea what's inside, but it sounds like it's doing ground isolation by using a very low value cap. The bass disappears when you connect this thing with your audio source. It's not recommended for people who like music.
👤I have been using 2 of these in my virtual pinball game for over a year. I'm playing music from my new laptop while I work from home. I haven't time or energy to fix the outlet that is powered from our old house. I get the classic 60hz hum. Not with this product! I'm going to buy a 3rd for my office. -- So far, I'm very pleased with my use on the first day. I'm building a pinball game that involves assembling electronics and hardware inside a cabinet. See the photo. The mix includes multiple power sources, two low-end amplifiers, and 2 sets of speakers that can be used for music, voices, and more. There is a It was no surprise that both audio sources had a lot of noise when I got it up and running. I tried many things and had no luck. I thought I'd try it, but I was not sure it would work. It got rid of the steady hum and also sporadic cracks and pops after I plugged it in. I just bought one to try it out, but will order another one.
👤This works well. I can't fix a ground loop noise on a source that drives me insane at times. I put one of these on the input to my mixer and the noise was greatly reduced. Not zero, unfortunately. I put it on the output of the mixer. Completely gone. There is a caveat. It's mostly ok with lows, but really low frequencies are rough on it and something like an extremely low bass hit can end up clipping very badly indeed. They're not quite the quality transformers that they should be for audio isolation purposes.
👤I was playing games on my computer while wearing headphones. I found that the power use for the game was increased because of the electrical interference caused by the graphics card or power supply. The solutions that were recommended were a sound card, an external device, and an external device. I tried the sound card and it didn't help the noise. There is a The buzzing whine was completely removed from my headphones. I am very impressed. It doesn't seem to affect the sound quality. There is a It really reduced the volume that I hear. I ran with my headphones reduced to the max volume from the windows controls, and then further reduced in each application. I had to increase that to 100% in windows and a tiny amount in each application in order to return to the volume I had before using it. This is fine for me because my setup was always capable of pumping out a higher volume before I started using this device. Make sure your set up can raise the volume enough to make up for the lower volume you'll get when you buy this. It works great and is cheap. If it breaks quickly, I will update this.
Breath noises are prevented from entering the microphone by this mic foam. The microphone can be positioned closer to the mouth for better voice clarity. Arctis headsets include SteelSeries Arctis 3, Arctis 5 and Arctis 7. Product has one mic foam. Also, note: The headphones are only shown for demonstration purposes. Ienza is a trademark. The use of the ienza trademark without the written consent of ienza, is not allowed. Federal and state laws can be used to determine whether trademark and unfair competition are in violation. ienza products are cost-effective alternatives. They are not endorsed by the manufacturers.
👤The hole the mike boom is in is TIGHT. This should prevent the screen from falling off, like the factory screen did. There is a The steelseries wireless pro headset was replaced with this.
👤The way these things work is that they have to be stretched over a microphone. It's stretchy for a reason. I've had friends tell me what I sound like with and without the filter, and the consensus was that it improved the sound of my voice and completely eliminated the sounds of my neighbors and my washing machine. The sound of my breathing was reduced. I was told to keep it on. There is a The microphone can't be pulled all the way back into the headset with it on, that's the only thing I don't like. Happy friends are worth it.
👤I got these because I thought they would reduce the noise of my mic, but after testing and asking other, there is no difference in sound quality. The steel-series Arctic 7's are noted. It fit very snug on the mic.
👤Push-to-talk was driving my friend crazy because she was breathing over her Steelseries Arctis 7 mic. Both of us were saved by this.
👤Very fast shipping. The hole is very tight but worth pulling up if you do not slit it or it will fall. Pull harder on the sides, it's very big, and the breathing noises are loud. I love it, I bought it to work from my balcony, and now it's clear my voice!
👤It's very tight and be careful not to damage it when installing. The material is so dense that the mic does not shine through. It's visible from a few angles, but I can't see it while wearing the headset.
👤It works great for the Steelseries mic headset. The snug fit won't fall off. I've taken it off multiple times.
👤I tend to breathe heavily when I just focus on the game and not anything else. My friends let me know. They were very happy with the purchase.
All devices that have a 3.5mm audio jack or ausb interface are compatible. The inline control only works if the connection is a good one. The voice filters technology that make your sound clean, crystal base and more professional is what Dedicidited Replacement mic has. In streamer game or tiktok lives, communicate in confidence. The omnidirectional mic only works for the Logitech G733 headset end. It is not an original product, but a high-bandwidth quality microphone work with the PRO-G drivers improved low-end response, Not delay the sound and increased sensitivity, and clarity, please note that it is Quality insured. You don't need to worry about lost connection and not responding to your team because you have a backup mic. Please make sure that your headphones are connected to your PC when using the Logitech G733 gaming headset.
Wide Compatibility Most of the digital devices, such as mp3/MP4/Mobile Phone/Computer/CD players, are comatively powered by the headphone amplifier. PC headphones with plush, padded headband and earcups. The system requirements for Enhanced Audio are Windows Vista, Windows 7, Windows 8, Windows 10 or later. The qualities of noise cancellation. A rotating microphone that is used for clear calls. Digital connections are compatible with the new 2.0 and 1.1 standards. In-line controls: adjust the volume and mic. Plug-and-play when you are ready with a simple connection. The H540 headset has high-definition sound and on- ear controls.
👤I bought two sets of headphones and would like to share my experience with prospective buyers. I was very happy when I got my first unit. Headphone cushions are great and speakers are nice. It's lightweight, so you can wear it for a long time. I noticed my headband was loose a few days ago. I found a crack in the plastic. There is another problem of cable that tangles. I thought it might be my fault. I ordered the second one. I don't play a game. I use it with more care. The second one had the same problem. I'm disappointed. Why does the tech use plastic that isn't better? The headband is made of plastic or thin. I still use the headphones. I am not a happy customer. It broke completely. I tried to reach them. They didn't respond well. There is a It stopped working. The customer support team does not exist. I'm not going to buy any headphones from Logitech.
👤Half of my life is spent in distance meetings. I've tried Bose headsets, speaker phones, and in- ear headsets. Most of these have been trashed and stored in a box in the closet. This is the only headset that I would purchase again. The sound quality is very good, the over ear design is comfortable and blocks a lot of side noise, the microphone can be raised when you're on mute, or brought down directly in front of your mouth to speak. They are connected to your laptop's port of use. These are inexpensive and worth a lot. After 2 years of daily use and travel with the cord tightly wrapped, my first set started losing connection and I couldn't hear my voice. I bought a headset that was exactly like the one I tossed. This model has the best listening and voice quality of the 27 I've tried and is cheap. It takes a lot of abuse in my bag. Highly recommended.
👤The headset has been suggested to me by other teachers who are also using it. This doesn't look fancy. When you wear it, it's nothing spectacular. That is what I want. A black one! I like that it doesn't hurt my head or ears. It can be adjusted to the size of your head on both sides. Sound is clear. There is a This has a good quality material. If you are using a Macbook pro with ausb-c plug, you need a dongle since it is not ausb-c. I didn't have a problem using the device in all my teachings even though it cost me more. I will be sticking with it since it is worth the money. It is reliable and not expensive.
👤For the first couple months, this headset is pretty good. It's lightweight, has decent sound, and decent audio, but after a while, it starts to fall apart. The first time I bought this, I loved it, but after 6 months, the wires near the volume button began to screw up, so the audio could only be heard in one ear. I bought another one because I thought the first one was a mistake, and the wires began to mess up again, this time near the base of ear, where the wire connects to it, leading to the exact same problem. I bought another one despite not learning my lesson. Same thing happened. This is a decent headset, but it's just not good enough. There is a The headset is cheap and decent for a few months, but the audio is messed up every time. If you feel like blowing $20 for a decent headset.
The Spongue accessories are soft and thick. The driver for the natural talking sounding audio is advanced. The omnidirectional boom mic targets your voice and filters out wind and external noise for high-quality call performance. The double-sided soft leather earmuffs, memory foam padding headband, and other space saving features ensure lasting comfort even for a long time calling. The head beam has an adjustment that allows you to find the perfect fit. The ear cups are 90 degrees and designed to fit your bag easily. Plug and play is easy to use. Both children and elders have easy control. You can connect the headset to the PC with a plug or you can detach the 3.5mm audio cable to connect with other devices. Control the volume from the control panel. All devices that have a 3.5mm audio jack or ausb interface are compatible. The inline control only works if the connection is a good one.
👤I was able to use them on my computer. They worked in meetings and in video calls. I needed it for one thing, to be able to make calls all day, and I would hear customer complaints that they were not heard by the other person. I had poor signal with the computer settings that I asjuated. The patient had a lot of echo on their end and I was able to hear myself in the headset. If you have to make calls all day from your computer, I recommend for nothing else. I had to connect in the headset hack to work. This wouldn't work as a headset. It would only be a speaker.
👤I had doubts about these because of the cheap price, but they work great. I couldn't figure it out because I take calls through my computer. You just have to adjust the settings and it will work on the PC. The product is great for the price.
👤The sound of these is good and they are reasonable.
👤A great microphone and sound. There are no real issues with Earphones that are a little small with no cups.
👤Tiene una cancelacion de ruido, el control de volumen, uy Util al igual.
👤A photo with a soda can. This is a good value for the cost for the current price. It has a plug for a cell phone and an accessory to connect it to a computer. I wore it for a 3 hour conference call and it was fine, longer than I might want. It's ok, but not amazing. There is a The leather is plastic and soft. There is a It's a good choice if you want the ease of plug and play.
👤A good deal is $17 for a headset that delivers this quality of sound. I don't use a microphone, but you can if you want to make phone and internet calls. You can either plug it into the minijack or into the extension that ends in a full-size plug. mike mute and up/down volume control are also provided by that piece. It was plug-and-play for me, because I put theusb cord in my laptop. There is a The earpieces are soft and comfortable, the headband is flexible, and the set is lightweight.
The microphones fit in the windscreens. Protect your microphone from noise. The material is good for voice. It's suitable for both indoor and outdoor venues. The Caliber is 0.31 inches.
👤It fits perfectly with my Vmoda BoomMic. It won't come off and go past where the mic ends.
👤I wanted a lavalier mic. They are huge. I'm pretty sure they cancel noise because you could park a Smart Car inside of one. The description doesn't do them justice. If you were using a scale that was appropriate for a Blue Whale, "Mini-sized" would be a fitting description.
👤Like many other truck drivers, I bought these for my headset. I read that it works as a replacement. It helps block wind noise. It does not stay on your mic. The hole is the same size as the center. The blue parrot mic covers are tighter on the hole to prevent it from slipping off. You can either push them back onto your headset or replace them.
👤I got my hyper x cloud flight mic, which didn't have any foam on it. I decided to get a filter after I noticed that the mic picks up a lot of pops. There is a These are a great price and fit perfectly. It only took one try to get it on. I don't have to worry about it falling off, as it's pretty snug around the mic.
👤I have to use a headset to teach yoga. I will return to the studio to teach after about a year. Every instructor has this headset. I wanted to switch out the foamy thing. I was not putting the foam in my mouth. I should have gotten a smaller size. I had to thread the hole smaller so that Popping wouldn't be able to use the mic. You can hear me breathing, but I can't. When that happens, I move the mic further away from my mouth. There is a If the foamy thing was small, I can't bother exchanging.
👤It fits the microphone of my headset. The microphone on the Artis is a bit chubby and resembles an ice hockey puck. It should fit well with other microphones. There is a It reduces breathing noise as well as plosives, so my audio quality is improved.
👤I have an Antlion Modmic 4.0 that needed to be replaced because it had a hole in it. It's a tight fit, but if you stretch it over enough you can get it to fit nicely. It seems a bit shorter than the original, but that has not been a problem. I think it might be a tad overpriced for what they are. I guess that depends on how long it lasts.
👤The microphone was sensitive enough to pick up fan noise from across the room, so I bought them. 5 stars are what these effectively put an end to. 5 points for coming 5 to a pack. If I need them, I have spare parts. I have 3 left if I need them, and I gave one to my girlfriend for her headset. They won't work miracles, but they do what they're designed to do. There are no problems here.
Headphone mic noise filter products from Auphonix. In this article about headphone mic noise filter you can see why people choose the product. Tonor and Sumaju are also good brands to look for when you are finding headphone mic noise filter.
Auphonix, Tonor and Sumaju are some of the best brands that chosen by people for headphone mic noise filter. Find the detail in this article. Ziocom, Phinus and Besign are also brands that their products are worth to check.