Best Headphone Monitor Hanger

Monitor 25 Jun 2022 10+ Comments Open

1. Headphone APPHOME Foldable Aluminum Universal

Headphone APPHOME Foldable Aluminum Universal

It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc. Small and foldable design saves space. It can be used to free your desktop from chaos. Safe and Stable: The headphone stand has strong glue that will allow it to last a long time. The materials are high-quality. The rubber pads on the headband protect it from wear. All kinds of headphones, such as wired headphones, wireless headphones, gaming headphones, TV headphones, and so on, are suitable for the universal headset holder. It's easy to install and can be mounted anywhere. On computers, desk, and wall. Clean the surface by using wipes.

Brand: Apphome

👤I was very happy with my purchase of this headphone holder, but it has been a year since I purchased it. I noticed that my headphones got in my hair when I noticed the odd goop on the bridge. The pull out bracket that my headphones rested on was the culprit. I was able to use alcohol wipes to remove all of the liquified glue and I was also able to repair the small pad that locks the brackets in the closed position with some automotive grade 3M double sided tape. Hopefully it will hold up better than what was used to assemble it. Is this the end of the world? I am going to keep an eye on it because it was a quick repair.

👤I have a charging station in my laundry room. The hug makes it look less cluttered and it gets a lot of stuff off the counter. I charge a lot of stuff on this station. The double sticky tape is used. I made it even more solid by attaching a couple screws to the holes. Unable to keep earbuds and headphones off the countertop while charging. If you don't have anything to hang on it, this is a great option. I'm very happy with the space that was cleaned up.

👤The option to screw it into your desk is what I bought this hook for. I tried the glue before I tried to put it in. I had low expectations, but the sticker is so strong that it's like a combination of Ultimate Warrior and Hulk Hogan. I'm thinking about buying another one for my towels.

👤My father built a desk for me that is solid wood. It was built for writing, not a computer. I used the glue that came with the product because I couldn't drill a hole in it. I have a very light-weight Sony headphones, but they haven't budged over a month. The hook portion is large and padded to not damage my headphones. I might put two different pairs on there. I love that when I move this desk, I can just close the hook and it won't be a problem. There is a The metal is heavy and shiny. It's a good addition to my desk. I wish it didn't have the logo, but it is perfect.

👤Unfortunately it did not last. It fell off my wall in the middle of the night, luckily it didn't break my headphones, I was sleeping. It was loud. I might use it on a wood surface with screws to hold it up instead of giving it to someone else. Holds fast to painted plaster. I've considered buying another one just for the tape. It has been on the painted plaster walls for a long time. It holds my headphones and doesn't bang when I place them down. The inside of the "hook" is made of some kind of material. It doesn't open without you meaning it to.

👤This is what it seems to be. I thought it would be bigger but it is not. I used the two screws instead of using the glue to stick to the wall. I would have been concerned that the headset wouldn't hold it's weight. There is a This looks great on the wall. When I moved my console, I realized I lost the space I wanted for the headset stand and that's when a hanging stand became optimal. This is in front of my console. It's difficult to pull it down when it's folded up, because you don't have headsets on. I think that will loosen over time with use and shouldn't be a negative.

2. APPHOME Headphone Rotating Universal Headphones

APPHOME Headphone Rotating Universal Headphones

Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers and shelfs. It's great for hanging game controllers, cables and other gadgets. The APPHOME headphone stand can be hung on to most desks, but only if they are 45mm thick and 5mm wide. Not only for storing all kinds of headphones, but also for headsets, glasses, and bags. The under-desk headset stand is a great place to keep your heavy headphones with its rotating neck. You can change it to any direction. Swings underneath your desk for discreet storage and swings back out for easy access. The hook supports all sizes of earphones. Make your desktop more tidy by using the under desk headphone hook with a headset cable organizers. It's a good idea to hold your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. It is easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or table from damage. The PC gaming headset holder for desk is made from high quality aluminum and can hold headsets without bending or breaking, making it a strong headphone Hook. Please contact them if you have a problem.

Brand: Apphome

👤This is a good thing because it keeps my headphones off my desk and out of sight. I like the range of motion because it made it easier to reach my desk. I had a smudge on my desk, but it was easy to wipe off with my sleeve, and it could also be cleaned with a towel. There is a The product branding on the side is ugly. I don't think anyone will check out my desk, see the logo, and say, "Woah, you got an APPHOME hanger?" I need to get one of those!

👤The screw is easy to loosen and tighten for a non-damaging attachment to any desk, it is made of metal and has a soft rubber feeling. I have only had this for a short time, so I will be interested in how it holds up, but for now it is perfect.

👤This product was one of the accessories that I needed to complete my new L shaped desk for gaming. It was easy to install as you just have to loosen the screw and it will fit your desks width. I have a glass desk. padding is added to the screw so that it won't scratch, for instance like mine, glass, metal and wood! The little opening for wires is something I love. This is a great headset holder and it's an awesome price.

👤I bought this item for my husband and me to clear out some of our desk space. I place my headphones wherever I can find them on my desk when not in use. They are out of my way when I need them. It's a small thing, but important to me.

👤I researched different designs before buying this. I like how this is strong and mounts almost anywhere, so you can move your headphones. They don't protrude. The rounded padding doesn't hurt your headphones. The dual headphone hanger version works great for me.

👤I found this perfect as a headset holder that can be put on your desk. The rotating feature makes it possible to have the headphones under the desk rather than out. The quality padding on the holder will prevent any scratches on the headphones. The cable organizers are nice to have, but I don't personally use them. The build quality is very good. There is a The build quality is very clean, sturdy, and polished. I'm very happy with it.

👤I don't like to drill things to the table and double-sided tapes have their limits. I preferred this as a single solution and so far it has been great, it does not tilt, looks good, and the infinite screw appears to be of an excellent quality.

👤I would buy this one again if I needed another stand. I have it hooked up to my desk. You can easily change the hook.

👤Aunque parece un artculo "capricho", la realidad es ayuda a darle ms vida. Mis Shure de cuero ahora ya estn colgados.

👤Producto, fcil de usar.

👤Aluminio se ve y siente a la hora de colocarlo.

3. VIJIM Headphone Foldable Universal Headphones

VIJIM Headphone Foldable Universal Headphones

The one-way folding arm design allows headphones and other small stuff to hang on it. You can save space by folding up when it's not in use. Under desk Headset HangerAdjustable clamps securely onto desks up to 2.04"/52mm thick and as narrow as 0.2"/6mm for a near universal fit on most desks. The non-slip silicone pad on the support surface will prevent the hook from scratching the leather of the headset head beam. The headphone stand is made of high quality aluminum, framed with space saving foldable structure, and finished with sand. It can carry up to 11 lbs. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers and shelfs. It's great for hanging game controllers, cables and other gadgets. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers and shelfs. It's great for hanging game controllers, cables and other gadgets.

Brand: Vijim

👤I didn't think I would need the fact that you can use it in multiple orientations and on objects with a wide range of thicknesses, when I bought this, because it was the least expensive of similar products. This gave me several options for the application that I have, and I was able to find a better solution than I would have found without this adjustability. It would have been better if it had a higher lip on the end to prevent it from sliding off.

👤This is my second desk mount. The first went to the trash because it was loose and narrow, and it let my headphones hit the floor. This one? The fold away feature makes it so much more convenient and easier to use. This year I will be by for my next computer. I will recommend it to others. Money was well spent.

👤The mount that dumped my headphones on the ground was replaced. Very sturdy. It's easy to install on my desk and keep my headphones out of the way when I'm not using them. The black color helps blend the hook with the desk. It's also fairly affordable. It is not very attractive.

👤Does what it says. Holds headphones. It is metal and takes a beating. They will hold up if you don't put them on the desk of a busy tech booth in an auditorium.

👤Over the years, I have been in many recording facilities. I have never seen a tool like this before. My headphones are new. Buy them in bulk.

👤These are perfect for my head phones. It was easy to attach to my computer desk and hold my headphones.

👤It works as you expect it to, so there is not much to say. It will stay up if you flip it up, that's a nice touch.

👤It's a great way to keep the headset out of the way. Sturdy and great value.

👤I'm in a work from home situation and I have to keep control. My headset is expensive and I don't want to risk it falling on the ground. I like to take care of my "costy" things, even though I don't have an obsessive-compulsive disorder. There's a soft part to put the headset on, nice features, and a metal build. I fixed it on my shelf and it fit perfectly. I think it's a good idea.

👤I bought this earphone holder because my earphones were hung on the desk's handle, which would push out the traces of them. There is a The soft leather support protects the headphones. After folding, the fixed brackets do not take up much space. It can be used at 90 degrees or 180 degrees if the screw hole position is changed.

👤It is hidden if not being used when the hook is up, thanks to the design of my DJ table. Even when I hit it, it was very sturdy. Solid built and priced. I can use it whenever I want since it is not fixed. It's easy to install and remove. Great purchase for me.

4. Aluminum Headphone Stand Hanger Foldable

Aluminum Headphone Stand Hanger Foldable

The case is compatible with wireless charging. Series 1/2 Airpods have wireless charging case capabilities. Airpods case cover does not allow for wireless charging. A marginal The thickness of the desk can be used to determine the thickness of the clamp, which can be easily fixed on most tables. High quality. The desk hook holder is made of aluminum alloy. Silicone rubber on the stand protects your headphones from being scratched. It is easy to remove and re-attach the screw clamp. Soft rubber pads on the ends of the clamps protect your desk or table from damage. It is easy to install on desks, cabinets, glass surfaces, desktop towers, shelf, etc. It's great for hanging game controllers, cables and other gadgets. There is a space-sharing program. The one-way folding swing has a length of 3.15 inch and allows headphones and other small stuff to hang on it. You can save space by folding up when it's not in use. You should arrange space ideally with horizontal and vertical installation.

Brand: Goldmille

👤I have been looking for this one. The design is made of metal. The rubber pad is for hanging your headphones on. It's universal design was perfect, as my table does not allow for a table mount. I put mine on the upper leg. If you need to adjust the hanger, it comes with 2 extra screws and an allen wrench. The rubber pads on the inside of both are perfect for the screw mechanism. This is a perfect piece of furniture.

👤The attachment is spring loaded. It does not open wide enough to fit in my desk. My desk height is 112 in. This is a great product.

👤This is the one you need if you want a headphone holder on your desk. I have no expectation that it will fail in my lifetime, it appears to be exactly what it appears to be. It was easy to purchase.

👤At first I was unsure if it would be useful, but it turned out to be very good. It is virtually mountable and has a section for cable ends.

👤The support arm holds my headphones securely. I put the headphones on for 3 or 4 times a day and the support arm never moved. The support arm doesn't scratch or damage my headphones.

👤A great desk hook. I ordered a second after getting my first one. The price should be a little lower.

👤This is perfect for me.

👤Sturdy steel and rubber coating are recommended for putting the headset.

👤Teams and zoom calls have become the norm. ... I have a headset and a pair of headphones in my desk. This is a great way to streamline the workspace. It can fit up to 3 pairs of gear. I've been most impressed by the solid steel feeling build quality, and I have mine fixed to my office desk. Great purchase.

👤This was bought for the recommendation of a friend. I use it to the left of my desk and it supports my headphones without me slipping down the desk leg. If you want something to hold your headphones out of the way on your desk, I would recommend it.

👤The little stand is great. It's easy to fit to a table and can be adjusted.

👤It was easy to install.

5. Mudder Headphone Headset Hanger Monitor

Mudder Headphone Headset Hanger Monitor

TOTAL MOUNT is the leader in electronics mounting. Over 70 patents, 50,000 five-star reviews, and a long history of quality make TOTAL MOUNT a leader in its field. The sticker can be attached firmly to the PC monitor and smooth wall or surface with an edge. The holder is small in size and light in weight, and you can hang other accessories on it. It's a good idea to prevent your headphones from scratching. It will make your desk cleaner. The size is 7.5 and the material is plastic.

Brand: Mudder

👤It's simple to set up, holds both head phones and cables well. There is a There are pros and cons. The backing isn't strong enough. There is a Fix! I wanted something like this which I could move around, I record music in a small room and sometimes I need to take out all the headphones and cables and have space for other projects. The supplied strips were not heavy duty. I put the fuzz side of the velcro on the side of the table where I could find the hangers. I want them to stay there as long as I can. I only gave it one star. I would give it 5 stars if they were supplied with both the strips and the heavy duty velcro. If they're mistreated, they can break, but we're all adults, don't mistreat them, and they'll last as long as you need them.

👤I love these so far. I have a computer lab of 30 tower PCs and it was always a mess. The headphones were all over the place, even though they had a spot on top of the computer tower. My students are not wasting time plugging in headphones. My kids can just grab the headphones off of the hanger and get started, because the headphones are already plugged into the back of the tower. It is easy to hang them up at the end of class. It has saved me a lot of time and money. There is a The product is easy to install. It was a pain to put the foam stickers in the plastic hook part but it was worth it for the time I've saved since then. I've never had a problem with hooks falling off or not sticking. The headphones I'm using aren't heavy, but this product suits my purposes perfectly. Other teachers compliment me on the fact that they want hooks for their classroom computers as well.

👤That is, your headphones! There is a My life was incomplete before I had this 888-405-7720 888-405-7720 You could find my headphones anywhere. It was crazy on my desk and on the floor. But not anymore. I can find them near my right arm now. I am happy to know that my headphones will be where I left them. The sticky-tape seems to be holding up fine, even though others have complained about its adhesion. It's stuck to glass, which is an ideal surface, but it's firmly on there. The key is to apply hard for a few minutes. If you have a chip-clip or something similar, it will fit and the sticky glue will set better. There is a I will let you know if it falls off. I just have to give the other two away and mount the other one at home.

👤The product came in a pack of four, with hooks and sticky parts. The application was very easy to apply for. You can peel off the tape on the side with the sticky strip. The hook will adhere to the strip if you place it inside. You can peel the tape off of the other side of the glue if you want to stick it to the surface you want. You should leave it for 24 hours once it is on. There is a The hooks work well on my Bears Solo 2 Wireless. They haven't fallen. I have removed the hook from my ManOWar headphones because they have fallen a few times. I don't think I let the glue set long enough. There is a Good value for the price and support a good amount of weight are the pros. I would highly recommend these hooks for anyone who is looking for a cheap and effective way to hang headphones off the side of a surface. Make sure you let the stick sit for a while before you try to use it.

6. Gamenote Headphone Charging Earphone Accessories

Gamenote Headphone Charging Earphone Accessories

Wide compatibility works with most over ear headphones. It can be used to store cables, wires, bags, and other items. The desk accessory is perfect. Combine the power strip and headphone stand and you will have a single device that you can use. The headphone stand can be used as a power strip, it has 3 power sockets, and the total output is 1250W, suitable for home and office, charging laptops, printers, pc monitor, Xbox PS4 game devices, TV, lamp and more. The stick can be removed. There are 3 SmartUSB ports for charging your mobile phone, tablets, e-reader, wireless headset and other devices. It can detect different devices and provide the fastest charging speed up to 2.4A per port or 3A overall, be convenient and save time. RGB lighting and touch control. This headset holder has 2 lighting modes, 6 lighting effects, multi-color flowing modes, and single color breadthing modes to create a cool gaming atmosphere. You can choose the color with the touch sensor switch. Perfect gaming desk accessories for men. The hardened plastic outer shell of the headphone hanger is safe and easy to use, and it has a built-in button for connecting or cutting off power supply. The headset stand is portable.

Brand: Gamenote

👤The bottom was bowed/warped and wouldn't sit flat on my table, so I sanded the center and added extra depth to the feet on each corner, not sure why there is a review for the product since it came. Buy something nicer if you save money. There is a If you turn the stand off, the LEDs can't remember its color setting, so if you run a specific color scheme, you either leave it on all the time or have to change it.

👤It's a power strip with a stick on it. You can get a headset stand for less than $10 and a power block for the same price. You're paying an extra 30% for convenience. It's reasonable, but the pale coloring of the LEDs doesn't match the rest of the peripherals on the desk. If you can find one for the same price or less, it might have better lighting effects.

👤This is the most beautiful piece of office equipment I've ever owned. I can't stop staring at it. I can charge my computer, phone, headset, and other electronics at the same time. I thought it was broken because it kept turning off, but I found out it had some sort of surge protection that it didn't like, so it shut off and protected everything else plugged in. I can take it with me when I travel. So far, it's functional, beautiful, sturdy. I cannot recommend more.

👤This stand is easy to use. If you knock over the stand, the pole will fall out, but it will hold up when standing up. Very beautiful. It has some plug ins at the top. Is it worth anything? There are cheaper options that work just as well. A good product.

👤The headset stand is the best and has everything I wanted. It holds the headset, but also has a charging port. It's convenient to charge other things at the same time with the surge protectors and elector plugs. It is cheaper than most of the PC accessory brands, but offers more. If that makes a difference to your purchase, it has different color glow modes. People need to know more about these.

👤I started buying cheap headphones because I didn't have a good place to hold them. I won't have to because they are in their place. I got this stand because of the ports on it and the light on it. It keeps my desk organized.

👤My son bought this with his holiday money. He loves that it holds his headphones and powers his devices. It makes his desk area look nice since there's not a bunch of wires randomly coming from a surge protector and it keeps his headphones from breaking from him.

👤It was easy to put together and you can add more plug-ins if you want. It charges quickly. The features of this product are nice, and the RGB is one of them.

7. TotalMount Gaming Headset Holder Permanent

TotalMount Gaming Headset Holder Permanent

Universal mounting: The portable vehicle headrest mount player allows you to easily install the posts into your car. Everything you need for a screen cover, mount, and remote control is included. Damage-free mounting. Mount your gaming headset almost anywhere. The premium-grade headset holder uses a specialremovable glue to avoid damaging the wall. This product is ideal for people who don't want to damage their headset or wall. This stand has an extra large cradle to make sure it is compatible with larger gaming headsets. This stand has a soft-Silicone holder to protect your headset band from scratches. It's compatible with all gaming headsets, over-the- ear headphones, and on- ear headphones. TOTAL MOUNT is the leader in electronics mounting. Over 70 patents, 50,000 five-star reviews, and a long history of quality make TOTAL MOUNT a leader in its field. TOTAL MOUNT is the leader in electronics mounting. Over 70 patents, 50,000 five-star reviews, and a long history of quality make TOTAL MOUNT a leader in its field.

Brand: Totalmount

👤The product works as intended. I have a headset on my computer. It seems very sturdy and has no fear of falling.

👤I have a headset that most stands don't work, but this one does very well with it.

8. Yocice Under Desk Headphone Aluminum Headphones

Yocice Under Desk Headphone Aluminum Headphones

You can match a variety of styles. Hook can hold up to 10 pounds. The heaviest headphones weigh about one pound. 3M VHB tape is used for theAdhesive. One headphone hang with 3M VHB tape and 2 cable clips. mounting on computers, desk and wall is durable.

Brand: Yocice

👤It was too sharp on the edges. I never installed the bd.

👤I used 2 of my studio headphones in my office and one of my PS5 headphones in my work desk. Works well for both. Highly recommended.

👤It is a metal hook that has good elasticity.

👤Not the best quality. Things fall easily when there is a flat angle.

👤I hung mine from some floating shelves. Very strong.

👤This product is what I like about it. The size is perfect.

9. Headphone Headphones Adjustable Universal EURPMASK

Headphone Headphones Adjustable Universal EURPMASK

Customer service is great. Give it a try. You can return it within a month if you don't like it. They will send you a new one if it is faulty within a year. Universal under design allows for a near universal fit on most desks by attaching a thin, narrow, and thick piece of metal to them. It is easy to remove the Spring Clamp. The audible headphone arm swings underneath your desk for discreet and non-intrusive storage and swings back out for easy access. BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Soft rubber pads are located on both ends to protect your desk or table from damage. The under desk mount is convenient for storing. Easy installation of a springed C Clamp.

Brand: Eurpmask Choose The Color Of Europe

👤We needed a better solution to keep our headphones from breaking and this was our answer, it's very sturdy and feels very well made, it's even better if you have an xbox one controller, it's even more perfect. My purse is probably around 10 lbs. I'll probably order more for myself and gifts in the future. Highly recommended.

👤The hook portion can bend if you put a lot of weight on it and it is very cheap. There is a The head doesn't lock up. The clip is not tight enough to prevent desk steps that are less than a quarter of an inch from moving. You can get a Brainwavz Hengja Hanger for the same price that has better construction quality. I would've gotten a second one, but I got this instead when the page from my old order suddenly said out of stock and started directly to a screen protectors. I wouldn't buy it again. Cheap, poor construction, plastic bends, top sticks up a lot. A bad product.

👤It's easy to put my headphones out of the way. I didn't want one where you have to use glue or screws. You don't need a heavy duty one if you have light headphones. The mount has a sufficient amount of space. The desk is protected by the padded clamps. The mount has a hook so you don't lose your headphones. You can choose which direction you want to hang your headphones. The cord clip is nice, but it's stiff, so I just wrap it around the hook and grab my headphones when I need them.

👤This thing is great. I was embarrassed that I didn't think of getting this a long time ago, but I did not know it existed. Maybe it didn't. I am a recording artist and I use expensive headphones. They were not taken very well care of in the past, as they would flop around on various surfaces. The device is easy to set up and I like that the hook can be changed to hang things or not. I think it's a good deal so that I can get another one for my other cans. I recommend this to anyone who wants to protect their investment.

👤It was easy to put in place. I got this because I was sick of my headphones laying in random places. The hook is neatly underneath. The picture doesn't show it, but there is a small loop for a cord to go through so I leave my charging chord handing from there so all my cords are close together and easy to manage. You can put the headphones on the hook and swing them out of the way under your desk. I put one on the side table for my headphones.

👤I didn't expect to write a review on this. I thought I knew what I was getting. This is a cheap, easy to scratch plastic. The cable clip would be better not there. The only. The mechanism for twisting the hook into different positions is a nice thing about this. You only need to rotation from 90 degrees and 180 degrees. The hook is pretty loose and you can position it anywhere from 0 to 180. I would have given it a pass, but the junk quality means it should be a lot cheaper than other METAL items. It would be a good deal at five bucks, since I got it for twelve ninety nine. If you don't know better, maybe eight. No way in over ten. I'll probably keep it because it's not worth it with the Pandemic. It will have to do.

10. Headphone Stand Sticky Headset Hanger

Headphone Stand Sticky Headset Hanger

Two preset heights give you maximum control over the level of your computer screen to improve posture and prevent neck and back pain. There is a notice. It is not possible to use it for painting a wall. If you paste to the wall, it will fall down. Make sure the surface is smooth, dry and oilless, and hang your headphones after 24 hours to make sure the hanger is firmly stuck. 500g is the max total weight. The headset holder with a magnet can be used when it is not in use. The arm of your headphones is covered with a soft rubber pad to protect it from slipping and scratching. The headphone hook has a strong sticky design, which can be applied to any smooth and clean surface. Hold your earphone in a firm position. Remove the sticker and stick it under your desk. It's great for hanging cables, hats and other gadgets to the kitchen counter, bookshelf, studio and company. A multi-purpose hook. The under desk mount is compatible with almost all wired and wireless headphones.

Brand: Lamicall

👤Does what it says it does. No issues.

👤I like the design. It's easy to hide and doesn't get in the way. It flips closed when you don't use it for headphones. It was easy to install, just remove the paper from the device and stick it on the spot you want it. The second adhesive pad they sent will help if The adhesive ever wears out. Overall, a great purchase, it does what I wanted it to do.

11. Lamicall Headphone Stand Headset Holder

Lamicall Headphone Stand Headset Holder

It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking. The rotation is done at a certain degree. The stick headphone hanger can be applied to different positions. Can paste under a table, under a desktop, under a cabinet, and on smooth surfaces. Headphone cable organizers. The headphone hook with the headset cable organizers can be used to make your desktop more tidy. Quick install. The holder has strong double-sided tape. Please hang your headphones after 24 hours to make sure the suface is dry and oilless and to make sure the hanger is firmly stuck. The hook of the headphone holder stand is made of rubber. The leather of the headset head beam needs to be kept free of the hook. It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc.

Brand: Lamicall

👤I gave one as a gift. The mount comes with an extra sticky pad so you can move it to another location if you want. The material is sturdy and doesn't feel cheap. We've bumped into it a few times but it hasn't broken or anything, but the mount is most likely going to fail given the weight. The mount can be used in many different ways, and it is very versatile. I've seen other options that aren't gaming headphone stands that take desk space, and plan on buying one for myself.

👤The item cannot be placed on the underside of the desk. For a few days, the glue stays. Twice, I used up the two patches that came with the product. If the base is mounted on the top side of the desk, this item will work. This takes up space on the desk surface that I didn't want. The product did not work as pictured, even after following the mounting instructions exactly. The device will not hold the Apple AirPods Max. Don't buy.

👤I have a white desk and a light grey chair, and this is the perfect accessory for it. The design is simple and quality. If you clean the surface before applying the glue, it will cure in 24 hours and be very strong.

👤The rotation feels great, it feels like clicking every 90 degrees. It was easy to install the included glue under my desk. It's easy to set the headset on when I work because I rotate the clip out. When I'm not working, I put it back under the desk so no one accidentally bumps into it. I used to have to reach under the desk to get to it. The double-sided cord clip is great to have because it allows you to clip in a headphone cord as well. If you need a power cord. The clip is a little flimsy. When I plug the headset into the light pull, I have to pop the cord back into the cord holder, which is an extra step. I would like the cord to stay in the clip.

👤The glue is terrible. Will not hold instuction to let the glue set for 24 hours, it did not work after 2 days. Might as well drill through the base with screws. You're better off with the screw style. There was an update on 2/7/2022. I did what I suggested a couple of weeks ago and it worked. The company made contact with me after modification and offered to send me a replacement. I said no because I accomplished the above and didn't need another one. They still wanted to give me a refund and send a new design with a scew shaft. The design worked better and the original cost of the order was returned. I increased my rating from 1 to 3 stars because of their customer support. You don't hear about it a lot these days.

👤I bought two of them because I liked this. They were easy to install. I had to store my headphones on them and I had to make sure it was good. One of the holders fell about three months later. I stuck it back up after I wiped the dirt off the spot it was going on and it seems to be holding up. I will switch out the glue if it falls again. The different ways in which it is held makes it easy to remove it from the way.

Summary

What is the best product for headphone monitor hanger?

Headphone monitor hanger products from Apphome. In this article about headphone monitor hanger you can see why people choose the product. Apphome and Vijim are also good brands to look for when you are finding headphone monitor hanger.

What are the best brands for headphone monitor hanger?

Apphome, Apphome and Vijim are some of the best brands that chosen by people for headphone monitor hanger. Find the detail in this article. Goldmille, Mudder and Gamenote are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com