Best Headphone Mount Clamp

Mount 3 Oct 2022 10+ Comments Open

1. MoKo Adjustable Sennheiser Audio Technica Headphones

MoKo Adjustable Sennheiser Audio Technica Headphones

AJUSTABLE CLIPS: The clamp can be adjusted based on the thickness of the desk, and can be fixed on most tables. High quality. The desk hook holder is made of aluminum alloy. Silicone rubber on the stand protects your headphones from being scratched. It is easy to remove and re-attach the screw clamp. Soft rubber pads on the ends of the clamps protect your desk or table from damage. It is easy to install on desks, cabinets, glass surfaces, desktop towers, shelf, etc. It's great for hanging game controllers, cables and other gadgets. The PS5 and PS4 Headsets have a headphone stand. There is a space-sharing program. The one-way folding swing has a length of 3.15 inch and allows headphones and other small stuff to hang on it. You can save space by folding up when it's not in use. You should arrange space ideally with horizontal and vertical installation.

Brand: Moko

👤I don't have a lot of space on my computer because I have a lot of stuff up here. There are four monitors, two PC towers, seven consoles. A standard upright headset holder was not going to work. I gave up on them and forgot about it. A week ago, a friend posted their desktop stand headset holder and it was one of the recommended items. It went in the cart. There is a Two screws hold the hardware to the shelf. The unit can be attached to the unit in either horizontal or vertical orientation. The ship is in the vertical orientation. It took me a while to set it up. I used the included key to tighten the screws, but the most important part of the process was to remove the clamp because the thread is so fine. Pop it on the shelf and the couple will turn it on. About 2 minutes from opening the Prime envelope to putting my headset on. There is a It's made out of a high quality coated steel that reminds me of a monitor mount. The weakest point is definitely the hinge, and if it broke it would happen there. Make sure it's not mounted in a place where you could hit it with your arm or leg. You will break off the shelf.

👤The all-anodized-aluminum structure feels sturdy, and the Silicon coating on the headband ensures that it won't be damaged while it's resting. There is a second strip of silicone on the inner edge, which is used to keep the foldable section in place. You can change the position of the holder by 90 degrees, and then use the horizontal and vertical position. It has its own wrench and a pair of extra screws. There is a It's well-designed and made.

👤I wear my headphones a lot when I play games or watch streaming services. They are in the way when I drape them over my monitor or set them on my desk. The stand is perfect. I attach it to the side of my desk so that it can be hung when not in use. The hook can be locked in an up position so it's out of the way when not being used.

👤Very happy. A reusable piece of equipment. It saves a lot of desk space. Good quality. Will update if it goes south. It's only close to a con because it's annoying that it can withdraw, so on rare occasions it can withdraw and get kicked. You have to pull it down before you can rest your headphones.

👤I've tried a number of different methods of attaching headphones to things. This is the only one that has lasted and worked consistently. I have been in ownership for 6 months. It's still rock-solid and hasn't budged. I use my headphones daily and I would have expected some attention, but I haven't. They work. What a concept!

👤I'm glad I found this holder. I wear my headphones in bed at night and have a lip on my night stand. I can put my headphones on the stand. I have a desk that has a hanger on it.

2. Lamicall Headphone Stand Headset Hanger

Lamicall Headphone Stand Headset Hanger

It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking. It is easy to install. You can easily move the stand to any place you want. No screws are needed to steady mount the desk clamp to your office desk, gaming table, bedside, studio, glass desk, headboard, nightstand and tables. The degree of flexibility is. The headset holder can be swung under your desk to take off the earphone. The desk clip is suitable for most furniture surfaces. You can organize your life. A universal headset holder. It can help you place headphones, it can also hang bag, hat, umbrella and other daily gadgets in your kitchen counter, bookshelf, entrance cabinet and so on. Save space by keeping your life in order. Anti-slip and durable. The part of the desktop and headphones hook that is covered with rubber pads will not scratch the furniture. The connecting rod of the headphone stand is made of metal and will hold your headset firmly and not easy to break. It is wide compatible. This under desk mount is compatible with almost all wired and wireless headphones.

Brand: Lamicall

👤The unit is made of plastic and has rubber pads. It holds up my headset. After being locked into place, it clicks into preset levels. The height is not adjusted. I wanted it for that reason. You may or you may not. Installation was easy, the two parts that fit together with a screw handle set the tension. It has the ability to screw down tightly. I'm happy with it.

👤The Lamicall Headphone Stand/Hanger is located. I stumbled across this on my daily check and it's a huge problem solution for people who have a minimal overhang on their desktop. No one is worried about it coming loose. I tried it for anyone with a severe lack of overhang and it worked. A perfect solution is recommended.

👤If you don't mind permanent damage, you can flip the hook over, the cover plate for the screw is secure, and the screw is easy to strip. It's much easier to grab my headphones than it is to use them.

👤The Lamicall Headphone Stand, Headset Hanger is a very simple design. The knob mechanisms of other designs are more difficult to deal with than the tightening/loosening barrel mechanism of this design. The jaws which contact the table edge are made of rubber so that the stand won't slip when tightened. It holds my headphones and is attached to my desktop. It was protected well during shipping. I will buy a second one for my office.

👤I needed a headsets stand for my equipment. I thought I was going to find desktop ones, but something that wasn't on my desk turned out to be even better. The only place that I could put my desk drawer was on the side of my desk, and it was a very short lip. I didn't think it would stay on being clamped. I was wrong. It has a strong grip. I am very happy with it.

👤My husband needed a place to store his headphones, so I gave this to him. The holder works well. It works well in our small apartment. It saves space by attaching to a table or desk.

👤I like that it has a wide hook. It's great for my desk to hold headphones.

👤I bought this for one of my grandsons so he could place them in a safe place when not in use. Did the job!

👤The job was done well and so 5 stars there. It's one of the few that allows the rest to go under the desk as well. I wish it had a way to lock the rotation of the rest and a smaller form factor for the part on top of the desk.

👤The item works as advertised. I use it to hang my headphones and wrap cords. You can put it at any angle you want. The delivery was fast. I would recommend it.

👤Je fais tu télétravail et j'ai un casque pour mes rencontres. Tout ce qui voyais des produits. Je chose to besoin. A un caoutchouc pour protéger mon meuble. et serrer le support Je recommande.

3. Aceyoon Under Headphone Stand Adjustable Installation Multifunctional

Aceyoon Under Headphone Stand Adjustable Installation Multifunctional

If there is a quality issue with this headphone rack, please do not purchase it. The under desk headphone mount is easy to install and use, the maximum thickness of the table is 50mm, no need for other tools, just according to the desk thickness to adjust and fix. It can be uninstall when you don't need it, and leave no trace on the desk. This metal headset stand under desk can hold up to 5 kilogram of weight, and can also carry handbags, umbrellas, clothes, etc., more widely. Silicone pad is non-slip and not easy to scratch your desk, which is perfect detail quality. The hook is more suited to your stuff. The universal earphone stand hook is made of high-quality aluminum alloy material, which is wear-resistant, stable and not easy to aging. The earphone brackets with a folding design are smaller than the palm and make your desk more clean.

Brand: Aceyoon

👤It is possible to remount it anywhere if you need it. You can mount it vertically with the Allen wrench and screws. It flips up so it is out of the way. One of the headphones has a thicker band and the other is thinner and it holds both. The cords have to be kept handy, so I bought this one. Works well.

👤The revision that was being shipped in Q2 2020 is a design I love. The wide space for a table or desk allows you to add this to many different places. There is a I found that the glue under the pad was leaking. The stuff is very sticky and hard to wash off, but it doesn't want to stay under the pad. I'm always worried about getting the gunk on my headband or on my fingers when I move the hanger.

👤I wish I'd known about them sooner. I bought two of them. One for my bt headphones and the other for my anual quest 2 I'm happy! It's easy to install. I like the flip design. The instructions are poorly written. I don't know what the set screws are for. One of the best purchases I've made in a while.

👤I don't usually review products, but this one was worthy of a review. I was looking for a replacement for the plastic table-top garbage that I had for holding headphones, but I found the one I was looking for. I ordered two and one came in and was silver, but I sent them back and got a second black one in two days so it was all right. This thing is amazing. It can be folded up when not in use. I like that it can be rotation if you want to. There is a The construction is strong. Period. If you try to pull it off, it will move if you tighten it down. It is perfect. I only had the first one for a couple of days, so I can get to know the product. Well. I don't know how this thing could change, it's built so well. If something goes wrong in the future, I will update this review, but for now, I am completely satisfied with this product.

👤Finding a place to put my bag that wasn't in anyone's way has been a problem for me. Not anymore! The solution is perfect. No tools are needed to install. I carry my bag with me so it weighs about 5 lbs. The hook is easy to hold. It's easy to find under my desk.

👤I initially searched for actual mic stand headphones, but found that most of the reviews were against them being too small and not compatible with most mic stands. I searched for an alternative and found these aceyoon under desk foldable universal metal headphone holder.

👤This has been a great addition to my desk. My headphones are protected because they are not vulnerable to being knocked off the table. The cable management is helpful. I know where my headphones are when I need to pull them on. There is a A solid accessory that is built well and not creating a hazard.

4. APPHOME Foldable Headphone Organizer Universal

APPHOME Foldable Headphone Organizer Universal

You will get a headphone holder. 60-day money back is promised. They are confident in their products. Please contact them if you have any questions. The foldable headphone is called a Hanger. It can be lain flat on the wall when it is not in use, folding, or expanding. The built-in cable loop is designed to prevent your headset's cable from dragging on the ground or getting caught between your desk chair's legs. Universal Headphone Stand Under Desk is a universal stand that can fit on most desks. It is easy to remove and re-attach the screw clamp. Soft rubber pads located on both ends of your desk or table protect it from damage. Premium quality is made of aluminum metal. 60 days of money back is included in the Headset Holder Warranty.

Brand: Apphome

👤I purchased the upgrade version without the cable organizers and the new upgrade with the cable organizers. Both versions had the same features, including the solid aluminum screw knob and the notch on the screw clamp pad for attaching to round desk legs. They arrived at the same time, and the upgrade version matched the catalog picture. The Newest upgrade did not. There are significant differences between the pictures of what arrived and the picture of the Amazon catalog. There is no notch for mounting to round desk legs, and the screw clamp pad is not completely flat. The cable organizers are on the opposite side of the hanging arm. The quality of the product was lowered from theUpgrade version in the changes #1 and #2. I will return to Amazon for a full refund. There is still a 1-star review. The seller reached out to me shortly after my initial product review to let me know the product I received was the older version which was replaced in August with the newer version. If I were to order it again from Amazon, they would give me a coupon that would let me get one for free. I took them up on their offer, but I was surprised to see that the older version of the product that had been re-released by Amazon was still there. The seller doesn't control what version of the product remains in Amazon inventory, but this is now November. You would think they would have exhausted their older version of the product by now. I purchased the exact same version of this product from another seller and they were able to deliver the newer upgrade version. 1-STAR to Amazon for pushing old inventory and 1-STAR to the seller for updating their product description, but then continuing to sell the old version through Amazon under a new product listing which does not match reality. I wonder how many other people who thought they were buying the newer version of the Prime Day product got shipped the older version. I was ready to write-off Apphome Direct forever after my second disappointing delivery of the older version of the product. Apphome Customer Service is persistent in ensuring that their customers are completely satisfied with the purchase experience as well as the products they sell. They apologized for the incorrect product being shipped and asked what they could do to make it right, after they had already fixed the issue. The only way for that to happen is for Apphonme Direct to send me the correct version of the product at no cost, and they will refund the price of the product if I purchase it a third time. "Third times the charm" is what they say, and it was in this instance! The newer version of the product was shown on the product page after I received the product. It's a good sign! I have dealt with a number of sellers on Amazon over product issues, but Apphome Direct Customer Service went above and beyond to make sure I was completely satisfied after my previous two bad purchase experiences. Apphome Direct is deserving of praise. I am happy to make more purchases from them again after having a positive experience with them.

5. APPHOME Headphone Rotating Universal Headphones

APPHOME Headphone Rotating Universal Headphones

Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers and shelfs. It's great for hanging game controllers, cables and other gadgets. The APPHOME headphone stand can be hung on to most desks, but only if they are 45mm thick and 5mm wide. Not only for storing all kinds of headphones, but also for headsets, glasses, and bags. The under-desk headset stand is a great place to keep your heavy headphones with its rotating neck. You can change it to any direction. Swings underneath your desk for discreet storage and swings back out for easy access. The hook supports all sizes of earphones. Make your desktop more tidy by using the under desk headphone hook with a headset cable organizers. It's a good idea to hold your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. It is easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or table from damage. The PC gaming headset holder for desk is made from high quality aluminum and can hold headsets without bending or breaking, making it a strong headphone Hook. Please contact them if you have a problem.

Brand: Apphome

👤This is a good thing because it keeps my headphones off my desk and out of sight. I like the range of motion because it made it easier to reach my desk. I had a smudge on my desk, but it was easy to wipe off with my sleeve, and it could also be cleaned with a towel. There is a The product branding on the side is ugly. I don't think anyone will check out my desk, see the logo, and say, "Woah, you got an APPHOME hanger?" I need to get one of those!

👤The screw is easy to loosen and tighten for a non-damaging attachment to any desk, it is made of metal and has a soft rubber feeling. I have only had this for a short time, so I will be interested in how it holds up, but for now it is perfect.

👤This product was one of the accessories that I needed to complete my new L shaped desk for gaming. It was easy to install as you just have to loosen the screw and it will fit your desks width. I have a glass desk. padding is added to the screw so that it won't scratch, for instance like mine, glass, metal and wood! The little opening for wires is something I love. This is a great headset holder and it's an awesome price.

👤I bought this item for my husband and me to clear out some of our desk space. I place my headphones wherever I can find them on my desk when not in use. They are out of my way when I need them. It's a small thing, but important to me.

👤I researched different designs before buying this. I like how this is strong and mounts almost anywhere, so you can move your headphones. They don't protrude. The rounded padding doesn't hurt your headphones. The dual headphone hanger version works great for me.

👤I found this perfect as a headset holder that can be put on your desk. The rotating feature makes it possible to have the headphones under the desk rather than out. The quality padding on the holder will prevent any scratches on the headphones. The cable organizers are nice to have, but I don't personally use them. The build quality is very good. There is a The build quality is very clean, sturdy, and polished. I'm very happy with it.

👤I don't like to drill things to the table and double-sided tapes have their limits. I preferred this as a single solution and so far it has been great, it does not tilt, looks good, and the infinite screw appears to be of an excellent quality.

👤I would buy this one again if I needed another stand. I have it hooked up to my desk. You can easily change the hook.

👤Aunque parece un artculo "capricho", la realidad es ayuda a darle ms vida. Mis Shure de cuero ahora ya estn colgados.

👤Producto, fcil de usar.

👤Aluminio se ve y siente a la hora de colocarlo.

6. Headphone 6amLifestyle Headphones Adjustable Black(Patented)

Headphone 6amLifestyle Headphones Adjustable Black%EF%BC%88Patented%EF%BC%89

The extra long arm fits most headphones. You can store your headphones with a wide headband. The raised part is designed to hold your headphones. No worry about falling off. This headset stand holder is made from high quality metal which makes it sturdy. It can support up to 11lb. Hang your headphones and other heavy gadgets. The pole is part of the grooves design for the flat surface with thickness between 2mm to 38mm. The rubber pad is attached to the end of the clip. It's also suitable for cabinets, shelves, and glass flat surfaces. It is easy to attach and use the headphone holder. You can put it wherever you want. The knobs can be twisted and fixed. No need to drill holes or apply glue. It's easy to install, remove or move. You will get a headphone holder. 60-day money back is promised. They are confident in their products. Please contact them if you have any questions.

Brand: 6amlifestyle

👤I would recommend an item called "APPHOME Headphone Hook Desk, Headphones Stand Under Table foldable Headset holder Clamp Hanger Mount, Built in cable clip organizer for PC gaming, Office, backpack bag purse hanging" on Amazon, rather than this. For the most part, my original review still stands. There is a The part that isn't the circular clamp has slid off over the years because the silicone/rubber glue hasn't held up on the top. The original review is still there. It's the same thing. It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's not a good thing It's the same thing. It's the same thing. It's not a good thing This is a piece of metal and a bolt. It's strong. Enough said. I'll give reasons why you should get this instead of the BrainWavz Hengja before I give the cons out of the way. - The bit is not curved. Not a big deal. It would be nice. I would take off a tenth of a star for this. The threads are not very smooth. A decade ago, I got a small amount of silicone grease for three dollars. I'd take another tenth of a star for this. The other one is made of rubber. I can't tell if the padding on the ends is old stock or not. If there is no rubber on the ends, return. This reduces the amount of force needed to keep the surface immobile and prevents damage to the surface. The Henja requires you to Torque the sucker down to get it to stay put. With this one, you barely have continued to tighten. - It will fit onto any surface from 0 to 38mm. The Henja has a minimum surface thickness of 21mm before you run out of thread, and anything thinner than that. You need to use tools. This is not the case. - There is no need for a wrench or screw driver with this thumbscrew. - The lip keeps things from falling off. There is a The product is worth it despite the design being almost perfect. It would be perfect if you made the hanger a bit wider, gave it a curve, and made the threads higher quality.

👤I ordered it twice. It is very sturdy and a thick metal and all components seem to last the rest of time. The screw in mechanism is where failure in similar products might occur, but this one is heavy duty and doesn't come loose naturally. I think the valley in the grip pad has an effect on stopping rotation, if you look at one of the photos I posted. I initially thought the bolt was too simplistic, but it turned out to be a really effective piece with zero points of failure, because it was a thick Billy threaded through the plate with a metal head on one side and a free-spinning holder for the grip. I was wondering if this thing would rattle in a loud bass environment, but it definitely doesn't. I have moved these things around a few times now and they work just as well each time I use them. There is a I will get more of these things if I get more headphones. Don't use cheap plastic alternatives.

7. Headphone APPHOME Rotating Universal Headphones

Headphone APPHOME Rotating Universal Headphones

The dual Headphones Hanger under the desk can hold two headphones at the same time, with a headband width within 2.1inch. The rotating neck of the headphone arm allows it to be used as a storage option for heavy headphones. For a near universal fit on most desks, the Clamp can be as narrow as 5mm and as thick as 50mm. It is easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or table from damage. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.

Brand: Apphome

👤I transitioned from a regular desk to a standing desk and I love it! There is a I bought the Anti Fatigue Bar to stand on so I can work on a stand up desk. I bought a dual stand under my desk so I can hang my headphones when not in use. It's very easy to install on a desk and it's very sturdy, but I like that it rotates so I can tuck it inside the desk rather than have it stick out. Absolutely nothing! There is a 5 out of 5 stars! If you need to hang stuff for storage, such as headphones, book bag, and anti fatigue bar, I highly recommend this. It's strong enough to hold anything. There is a Hope this was useful. If it was, please click on the button below. Thank you!

👤The design is subtle and easy to install, and thepadded hooks can be adjusted to your desk. There is a If you have a thicker desk, you won't have much clearance for your headphones. This was used for our headset. The hooks aren't adjusted to go lower than the C clamp, so it barely fits under the desk. I thought it would be bigger and longer because of the reviews. Would not be possible to fit 4 quality headphones on here. I thought my headphones wouldn't be a problem at my desk. It works. It works and is cheap, but not my favorite for the purpose I bought it for.

👤Excellent headphone holder! I use this to hang my headphones above my headphones amplifier at the back of my desk. There is a The steel is very strong. It is very easy to install. I like the way the hanger rotates. I will probably get another pair of headphones. This is the best I have found before. I bought another one to see which one I liked the best. The other is made with plastic and takes up more space than the other. I'm sending it back. This is the keeper!

👤I use it to hold two briefcases. The Bag of Holding is from ThinkGeek and the large briefcase is from Saddleback Leather. Hanging them from the device keeps them out of the way of the robot. It looks better than any other method of storage I have tried.

👤I wanted to buy a single hook for my headset. I found a dual headphone stand and extra wide brackets. I don't have enough room on my desk to hang this hook. I need something to hang from the shelf. It is about 2 inches thick. The hook is perfect on the edge. I use the extra long arm to throw my headset on there. I know where to find my headsets.

👤I was worried that this might not hold up because my desk has a metal tube on the bottom side, and I needed something that was strong enough to hold two pairs of headphones. I've had no issues. The item I received is not the same as the one pictured. There are two small tunnels on the plane of the headphone-holding areas near the edges that you can cut out if you want to get a cable grip. It's too wide to hold regular 3.5mm cords, so maybe it would hold woven cords?

8. VIJIM Headphone Foldable Universal Headphones

VIJIM Headphone Foldable Universal Headphones

The one-way folding arm design allows headphones and other small stuff to hang on it. You can save space by folding up when it's not in use. Under desk Headset HangerAdjustable clamps securely onto desks up to 2.04"/52mm thick and as narrow as 0.2"/6mm for a near universal fit on most desks. The non-slip silicone pad on the support surface will prevent the hook from scratching the leather of the headset head beam. The headphone stand is made of high quality aluminum, framed with space saving foldable structure, and finished with sand. It can carry up to 11 lbs. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers and shelfs. It's great for hanging game controllers, cables and other gadgets. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers and shelfs. It's great for hanging game controllers, cables and other gadgets.

Brand: Vijim

👤I didn't think I would need the fact that you can use it in multiple orientations and on objects with a wide range of thicknesses, when I bought this, because it was the least expensive of similar products. This gave me several options for the application that I have, and I was able to find a better solution than I would have found without this adjustability. It would have been better if it had a higher lip on the end to prevent it from sliding off.

👤This is my second desk mount. The first went to the trash because it was loose and narrow, and it let my headphones hit the floor. This one? The fold away feature makes it so much more convenient and easier to use. This year I will be by for my next computer. I will recommend it to others. Money was well spent.

👤The mount that dumped my headphones on the ground was replaced. Very sturdy. It's easy to install on my desk and keep my headphones out of the way when I'm not using them. The black color helps blend the hook with the desk. It's also fairly affordable. It is not very attractive.

👤Does what it says. Holds headphones. It is metal and takes a beating. They will hold up if you don't put them on the desk of a busy tech booth in an auditorium.

👤Over the years, I have been in many recording facilities. I have never seen a tool like this before. My headphones are new. Buy them in bulk.

👤These are perfect for my head phones. It was easy to attach to my computer desk and hold my headphones.

👤It works as you expect it to, so there is not much to say. It will stay up if you flip it up, that's a nice touch.

👤It's a great way to keep the headset out of the way. Sturdy and great value.

👤I'm in a work from home situation and I have to keep control. My headset is expensive and I don't want to risk it falling on the ground. I like to take care of my "costy" things, even though I don't have an obsessive-compulsive disorder. There's a soft part to put the headset on, nice features, and a metal build. I fixed it on my shelf and it fit perfectly. I think it's a good idea.

👤I bought this earphone holder because my earphones were hung on the desk's handle, which would push out the traces of them. There is a The soft leather support protects the headphones. After folding, the fixed brackets do not take up much space. It can be used at 90 degrees or 180 degrees if the screw hole position is changed.

👤It is hidden if not being used when the hook is up, thanks to the design of my DJ table. Even when I hit it, it was very sturdy. Solid built and priced. I can use it whenever I want since it is not fixed. It's easy to install and remove. Great purchase for me.

9. Knox Gear Headphone Hanger Organizer

Knox Gear Headphone Hanger Organizer

There is a space-sharing program. The one-way folding swing has a length of 3.15 inch and allows headphones and other small stuff to hang on it. You can save space by folding up when it's not in use. You should arrange space ideally with horizontal and vertical installation. Universal design under design. Any desk with varying top thickness can be latched on by a universal clamp. The rotating accessory headphone is a discreet, non-intrusive storage option that swings out with one simple gesture. The built in cable loop allows you to store your headphones underneath your desk while running the cable through the loop for a clean, clutter-free table top. There are soft rubber pads. The pads are located on the ends of the clamps to make sure that there are no scratch marks on the surface of the desk. CONVENIENT: An under desk mount is convenient for discreet storage.

Brand: Knox Gear

👤I am very pleased with this accessory. I use headphones on my computer for music production. I don't want themcluttering up my desk. There is a The desk can be easily clipped with the simple hanger. It takes 5 seconds to attach it. There is a It holds the headphones securely. There are two pairs hanging on my setup. There is a There is a nice feature that rotates. You can put the headphones under the desk. This is a great solution to a chronic annoyance.

👤These are great for holding your headphones. They don't use tape to hold onto the desk, they use a different method that leaves no marks or damage. There is a special spot to hold the plug. It's perfect for a purse or headphones.

👤The first thing in the description is that the universal clamp can be latched on to any desk. That is simply not true. I have an Ikea desk that is about 1 1/2 inches thick and it won't fit in my space. It needs to be clear in the product page that it only fits desks that are less than 1.5 inches.

👤The hangers I ordered are sturdy and well made. A great product. I will be ordering more in the future. Thank you seller for the hangers that can be used for many things. There is a country called GB.

👤It is very sturdy, holds my cords with ease. You can have the holder out or under the base. Most desks should fit the spring loaded grip.

👤Not flashy or fancy, it works. I got one for myself and one for my son. It seems sturdy for light use. I'm not sure how long the 8 year old's will last. 8 year olds.

👤The build quality was very good and it was easy to mount.

👤Para soportar los audfonos.

10. Foldable Headphone Aluminum Headphones Universal

Foldable Headphone Aluminum Headphones Universal

The under desk mount is convenient for storing. Easy installation of a springed C Clamp. For a near universal fit on most desks, the Under Desk Headphone Hanger is used. It can be lain flat on the wall when it is not in use, folding or expanding at your convenience. It is easy to remove and re-attach the screw. Soft rubber pads located on both ends of your desk or table protect it from damage. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers, shelfs etc. It's great for hanging game controllers, cables and other gadgets. The TV stand does not have room for the soundbar. The sound bar width is less than 2.1 inches, it is 5 lbs and there are two racks to support it. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.

Brand: Apphome

👤My TV stand doesn't have room for the soundbar so I used two racks to hold it. The sound bar is 5 lbs heavy and supported by two racks. I'm happy it worked out.

👤I'm glad I chose this one because there are so many different models to choose from. It has a heavy, solid feel to it, and it has a nice padding on the arm so it won't damage the furniture. It folds up when not in use. Great product! I am an actual consumer, not a fake reviewer.

👤They are very well constructed. I attached them to the end of the stand that holds my TV. I put my sound bar on them. The sound bar is small enough to fit on them, so they can hold it in front of the TV. The sound bar could not be held on the TV stand because there was not enough room.

👤This thing is perfect. My boyfriend's desk has a small lip on the sides that hangs over the sides, but it is a vintage metal desk. Since these holders are mostly designed for desks with empty space below, I had to search through a million to find one that didn't require so much depth for the tension screw. It works great after finding this one. It's easy to install, but will still hold a large clunky headset. The photos have accurate measurements.

👤There are three people working from home, one of them is a gaming son. I'm running out of places to put my headsets, my son has a gaming headset, and I've got my headset for Teams. This particular hook is unique for a couple of reasons. I like the metal construction. It blends in with any black furniture or decor. If it happens to be in a high pass area of your desk or table, the folding design will allow you to get it out of the way. The ability to adjust the orientation from a vertical to horizontal one was a feature that made this a definite purchase. My desk is made of wood and metal and has a lip on it. The standard vertical style brace clap design is useless because it is short of the height of the table. I can't use boom stands with this table because of the other accessories I have. The only thing I had to do was remove the two allen screws and attach them to the leg of the table. It is now a permanent fixture. A huge problem was solved when I reached for my headset. I bought two of them for work and one for home. A great buy.

👤I always remain objective and honest when reviewing products. I always review with information that I feel others would like to know about the product, as I always assume what I'm writing will affect the purchase. I try to go beyond surface characteristics and input into quality, value and application. I will always end the review with an answer as to whether or not I would purchase the item again, which I believe is the most critical question pertaining to the item. Let me know if you want me to review your items. I was looking for a cheap hanging solution for my headphones and this product was the only one I could say anything about. I usually have my headphones on, but it can flip up when not in use. The screw base makes it easy to use for different sizes of desks. I'll probably buy another one for my daughter. It's a very handy device, serves the purpose well, and is cheap, but sturdy. You won't be disappointed.

11. Lamicall Headphone Stand Headset Hanger

Lamicall Headphone Stand Headset Hanger

Universal mounting: The portable vehicle headrest mount player allows you to easily install the posts into your car. It comes with everything you need, including a leather screen cover. It is easy to install. You can easily move the stand to any place you want. No screws are needed to steady mount the desk clamp to your office desk, gaming table, bedside, studio, glass desk, headboard, nightstand and tables. The degree of flexibility is. The headset holder can be swung under your desk to take off the earphone. The desk clip is suitable for most furniture surfaces. You can organize your life. A universal headset holder. It can help you place headphones, it can also hang bag, hat, umbrella and other daily gadgets in your kitchen counter, bookshelf, entrance cabinet and so on. Save space by keeping your life in order. Anti-slip and durable. The part of the desktop and headphones hook that is covered with rubber pads will not scratch the furniture. The connecting rod of the headphone stand is made of metal and will hold your headset firmly and not easy to break. It is wide compatible. This under desk mount is compatible with almost all wired and wireless headphones.

Brand: Lamicall

👤The unit is made of plastic and has rubber pads. It holds up my headset. After being locked into place, it clicks into preset levels. The height is not adjusted. I wanted it for that reason. You may or you may not. Installation was easy, the two parts that fit together with a screw handle set the tension. It has the ability to screw down tightly. I'm happy with it.

👤The Lamicall Headphone Stand/Hanger is located. I stumbled across this on my daily check and it's a huge problem solution for people who have a minimal overhang on their desktop. No one is worried about it coming loose. I tried it for anyone with a severe lack of overhang and it worked. A perfect solution is recommended.

👤If you don't mind permanent damage, you can flip the hook over, the cover plate for the screw is secure, and the screw is easy to strip. It's much easier to grab my headphones than it is to use them.

👤The Lamicall Headphone Stand, Headset Hanger is a very simple design. The knob mechanisms of other designs are more difficult to deal with than the tightening/loosening barrel mechanism of this design. The jaws which contact the table edge are made of rubber so that the stand won't slip when tightened. It holds my headphones and is attached to my desktop. It was protected well during shipping. I will buy a second one for my office.

👤I needed a headsets stand for my equipment. I thought I was going to find desktop ones, but something that wasn't on my desk turned out to be even better. The only place that I could put my desk drawer was on the side of my desk, and it was a very short lip. I didn't think it would stay on being clamped. I was wrong. It has a strong grip. I am very happy with it.

👤My husband needed a place to store his headphones, so I gave this to him. The holder works well. It works well in our small apartment. It saves space by attaching to a table or desk.

👤I like that it has a wide hook. It's great for my desk to hold headphones.

👤I bought this for one of my grandsons so he could place them in a safe place when not in use. Did the job!

👤The job was done well and so 5 stars there. It's one of the few that allows the rest to go under the desk as well. I wish it had a way to lock the rotation of the rest and a smaller form factor for the part on top of the desk.

👤The item works as advertised. I use it to hang my headphones and wrap cords. You can put it at any angle you want. The delivery was fast. I would recommend it.

👤Je fais tu télétravail et j'ai un casque pour mes rencontres. Tout ce qui voyais des produits. Je chose to besoin. A un caoutchouc pour protéger mon meuble. et serrer le support Je recommande.

Summary

What is the best product for headphone mount clamp?

Headphone mount clamp products from Moko. In this article about headphone mount clamp you can see why people choose the product. Lamicall and Aceyoon are also good brands to look for when you are finding headphone mount clamp.

What are the best brands for headphone mount clamp?

Moko, Lamicall and Aceyoon are some of the best brands that chosen by people for headphone mount clamp. Find the detail in this article. Apphome, Apphome and 6amlifestyle are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com