Best Headphone Mount Wall

Mount 25 Jun 2022 10+ Comments Open

1. Lamicall Headphone Stand Headset Hanger

Lamicall Headphone Stand Headset Hanger

The marble base can be assembled with the simple tools included in the hardware pack. The rotation is done at a certain degree. The stick headphone hanger can be applied to different positions. Can paste under a table, under a desktop, under a cabinet, and on smooth surfaces. Headphone cable organizers. The headphone hook with the headset cable organizers can be used to make your desktop more tidy. Quick install. The holder has strong double-sided tape. Please hang your headphones after 24 hours to make sure the suface is dry and oilless and to make sure the hanger is firmly stuck. The hook of the headphone holder stand is made of rubber. The leather of the headset head beam needs to be kept free of the hook. It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc.

Brand: Lamicall

👤I gave one as a gift. The mount comes with an extra sticky pad so you can move it to another location if you want. The material is sturdy and doesn't feel cheap. We've bumped into it a few times but it hasn't broken or anything, but the mount is most likely going to fail given the weight. The mount can be used in many different ways, and it is very versatile. I've seen other options that aren't gaming headphone stands that take desk space, and plan on buying one for myself.

👤The item cannot be placed on the underside of the desk. For a few days, the glue stays. Twice, I used up the two patches that came with the product. If the base is mounted on the top side of the desk, this item will work. This takes up space on the desk surface that I didn't want. The product did not work as pictured, even after following the mounting instructions exactly. The device will not hold the Apple AirPods Max. Don't buy.

👤I have a white desk and a light grey chair, and this is the perfect accessory for it. The design is simple and quality. If you clean the surface before applying the glue, it will cure in 24 hours and be very strong.

👤The rotation feels great, it feels like clicking every 90 degrees. It was easy to install the included glue under my desk. It's easy to set the headset on when I work because I rotate the clip out. When I'm not working, I put it back under the desk so no one accidentally bumps into it. I used to have to reach under the desk to get to it. The double-sided cord clip is great to have because it allows you to clip in a headphone cord as well. If you need a power cord. The clip is a little flimsy. When I plug the headset into the light pull, I have to pop the cord back into the cord holder, which is an extra step. I would like the cord to stay in the clip.

👤The glue is terrible. Will not hold instuction to let the glue set for 24 hours, it did not work after 2 days. Might as well drill through the base with screws. You're better off with the screw style. There was an update on 2/7/2022. I did what I suggested a couple of weeks ago and it worked. The company made contact with me after modification and offered to send me a replacement. I said no because I accomplished the above and didn't need another one. They still wanted to give me a refund and send a new design with a scew shaft. The design worked better and the original cost of the order was returned. I increased my rating from 1 to 3 stars because of their customer support. You don't hear about it a lot these days.

👤I bought two of them because I liked this. They were easy to install. I had to store my headphones on them and I had to make sure it was good. One of the holders fell about three months later. I stuck it back up after I wiped the dirt off the spot it was going on and it seems to be holding up. I will switch out the glue if it falls again. The different ways in which it is held makes it easy to remove it from the way.

2. Headphone Headphones Adjustable Universal EURPMASK

Headphone Headphones Adjustable Universal EURPMASK

Customer service is great. Give it a try. You can return it within a month if you don't like it. They will send you a new one if it is faulty within a year. Universal under design allows for a near universal fit on most desks by attaching a thin, narrow, and thick piece of metal to them. It is easy to remove the Spring Clamp. The audible headphone arm swings underneath your desk for discreet and non-intrusive storage and swings back out for easy access. BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Soft rubber pads are located on both ends to protect your desk or table from damage. The under desk mount is convenient for storing. Easy installation of a springed C Clamp.

Brand: Eurpmask Choose The Color Of Europe

👤We needed a better solution to keep our headphones from breaking and this was our answer, it's very sturdy and feels very well made, it's even better if you have an xbox one controller, it's even more perfect. My purse is probably around 10 lbs. I'll probably order more for myself and gifts in the future. Highly recommended.

👤The hook portion can bend if you put a lot of weight on it and it is very cheap. There is a The head doesn't lock up. The clip is not tight enough to prevent desk steps that are less than a quarter of an inch from moving. You can get a Brainwavz Hengja Hanger for the same price that has better construction quality. I would've gotten a second one, but I got this instead when the page from my old order suddenly said out of stock and started directly to a screen protectors. I wouldn't buy it again. Cheap, poor construction, plastic bends, top sticks up a lot. A bad product.

👤It's easy to put my headphones out of the way. I didn't want one where you have to use glue or screws. You don't need a heavy duty one if you have light headphones. The mount has a sufficient amount of space. The desk is protected by the padded clamps. The mount has a hook so you don't lose your headphones. You can choose which direction you want to hang your headphones. The cord clip is nice, but it's stiff, so I just wrap it around the hook and grab my headphones when I need them.

👤This thing is great. I was embarrassed that I didn't think of getting this a long time ago, but I did not know it existed. Maybe it didn't. I am a recording artist and I use expensive headphones. They were not taken very well care of in the past, as they would flop around on various surfaces. The device is easy to set up and I like that the hook can be changed to hang things or not. I think it's a good deal so that I can get another one for my other cans. I recommend this to anyone who wants to protect their investment.

👤It was easy to put in place. I got this because I was sick of my headphones laying in random places. The hook is neatly underneath. The picture doesn't show it, but there is a small loop for a cord to go through so I leave my charging chord handing from there so all my cords are close together and easy to manage. You can put the headphones on the hook and swing them out of the way under your desk. I put one on the side table for my headphones.

👤I didn't expect to write a review on this. I thought I knew what I was getting. This is a cheap, easy to scratch plastic. The cable clip would be better not there. The only. The mechanism for twisting the hook into different positions is a nice thing about this. You only need to rotation from 90 degrees and 180 degrees. The hook is pretty loose and you can position it anywhere from 0 to 180. I would have given it a pass, but the junk quality means it should be a lot cheaper than other METAL items. It would be a good deal at five bucks, since I got it for twelve ninety nine. If you don't know better, maybe eight. No way in over ten. I'll probably keep it because it's not worth it with the Pandemic. It will have to do.

3. Latom Foldable Hanging Aluminum Headphones

Latom Foldable Hanging Aluminum Headphones

One holder for all is designed to hold your game controllers and headphones in one place. The heavy duty folding hooks are made from aluminum. The coat hook is 78 x 26 x 71mm/ 3.07 x 1 x 2.79 inches and the screws are 25mm long and 8mm in screw head diameter. You can use these folding wall hooks to hang dresses, clothes, headsets, and hats in different places, such as bedrooms, bathrooms and closets. The hanging hook has a smooth edge that will not damage your clothes or items you hang on. The folding hooks are very easy to install. The hooks are reinforced with 2 screws. The folding hooks are very easy to install. The hooks are reinforced with 2 screws.

Brand: Latomex

👤If you are looking for an item to see your nerdiness, then these are the ones for you. Your headphones are mounted on your wall as if they are a trophy buck. If you want to impress the ladies, you should show off those beautiful headsets. The folding mechanism makes them disappear like your father when you were a child.

👤I had the idea to hang my headphones and a bunch of stick on hooks, but they came up a few times. This one gives value. There is a 5 piece package out there, but this one of 4 costs less. It is made of metal. It falls down. It's about 3 inches or something like that. Comes with screws. I have 6 headphones on the wall. It will work for any hook of that size. I can flip the doors up when they're not in use. You don't need to search for hours to spend 10 bucks.

👤The Greekia version of these are twice the price, and they are fantastic. I was trying to save money, and so I ordered these, and two of them fell apart and opened up. There is no way to put the pins back together after the plastic came out from under the metal lip. The two that were usable were from the four pack.

👤I didn't want to spend more than a few dollars for a mount for my controller. The official ones go over 15 dollars but are not worth it. I found these for a lot less than I expected. If I had bought a headset mount and controller, it would have cost me 30 dollars and I would have had to pay 6 dollars for it. It worked out great.

👤Nice idea, nice design, poorly executed with cheap materials. I received more than I wanted because I marked the box twice. I have replaced one of them three times now. They hang partially open after install, as they no longer flip back to their original position.

👤I bought these brackets to hold my gym gear. They're easy to fold when not in use. The brackets can hold a lot of weight. My opinion is over 10 lbs. They would be great for hats and jackets.

👤I needed a couple of hooks for my headphones and for the price, I got this kit of 4. There is a This is a bargain and it is sturdy. One of them holds their guitar by a strap for weeks without a problem if you use the correct screws. The elbow part is strong and will hold pounds and pounds of load, but the folding design may be deceiving, as it is more of a mechanical design.

👤The metal is easy to open and close, and it stays closed when closed. It's a good size to fit big things.

4. Controller Anti Slip Universal Headphone Accessories

Controller Anti Slip Universal Headphone Accessories

It is easy to carry and install for beginners. The controller holder is perfect for universal video game controllers, including the PS3/PS4/PS5 and Nintendo Switch Pro controllers. Get 4 packs holders in one amazing package and enjoy your controller museum. The foldable wall mount controller holder is an upgrade to the previous design and will allow you to free up more space for your game room. It can be opened or closed. The controller is out of the way when not in use. It's a better angle to display your controllers. The two methods of installation are strong and simple. Max. The load was 3.3lb/ 1.5 kilo. The screw and anchor installation is a more secure option. Max. The load is 6.6lb. The controller holder can be mounted on the wall, beside the desk, behind the PC monitor, and on the shelves. You can show your controllers anywhere you want. Giving the controller a safe home is multi-protection. The sitting bed of the controller holder has an anti-slip pad to protect it from being scratched. The controller will not fall out of the holder if the raised baffle is used. The package has a foldable controller holder, strong glue, screw, and plastic anchor. You can enjoy a long-term peace of mind with the included 12 months warranty. If you have a question, please contact them by Amazon message.

Brand: Evecobo

👤I bought a similar wall-mount for my husband. We have a cabinet next to his desk that I mounted to his desk, and when I saw these, I realized they were perfect for organizing his console controllers. I mounted all of them on the cabinet with a couple of inches between them so the controllers wouldn't hit each other. The mount design is universal, so it fits the PS5 controllers as well as his PS3 controller. It was easy to mount since it was two small screws. I did not need the anchors. Getting them level is not a problem if you know how to hang things by screws. The sticky pads can be used as guides for the screw placement. I had to tighten them down a little at a time until they were snug enough for the cover to slide on. I handled them with care because they are plastic and I wanted to be safe. There is a The design and ease of use are both good, but the material is not as durable as I would prefer. I am leaving my review at 5 stars. I would buy more if I could find another place like this where I could de-clutter.

👤I have been using these for the past 4 months. These work well to keep my controllers off my desk. It's nice that they fold up when you don't use them. I wanted to warn you that you should not use the included strips. Those strips are great at keeping the mounts on the wall, but they are not strong enough. I had to take these off the wall and it took me a while to unstick them. I used a heat gun to get the glue off. If you don't want to drill holes in your wall, then I would recommend that you use command strips. They work just as well and are a lot easier to remove from the wall. The other things are great. The heat gun I used to get the glue off did not damage me.

👤It uses either screws or glue for installation. The glue should work well for most purposes, which makes it easy to install.

👤I would give more stars if I could. I used my own heavy weight hook. I stuck them to my wall. They fit every controller I have and they're a good fit for a phone. When not in use, it folds up and out of the way. I'm getting more of these.

👤It works best on xbox and switch controllers.

👤This was the perfect product for my husband, who wanted the controllers to appear like they were hanging by themseleves. The controllers fit well and they were ready to install. No slipping or falling out.

👤I love these so much. They're sturdy and come with screws in case you want to screw it on. I like that I can display my controllers and still be rental friendly.

👤These are effective. I like the convenience of their design. I own every controller in the house.

5. Brainwavz Cradle Large Audio Technica Accessories

Brainwavz Cradle Large Audio Technica Accessories

The controller wall mount includes wall anchors, double-sided tape, and hard plastic for long operation life. The design makes it easy to reach your headphones. It was designed by the headphone manufacturers to have minimal long term indentation on your head band. The Brainwavz Cradle has a curved bed in order to better hold your headphones without leaving marks on your head band. The same 3M VHB tape, the same glue, and long term safety are what makes it secure. If you have to move the stand after placing it please use a hair dryer to warm up the pad and then remove it from the wall. The max weight is 1.5 kilogram. It's comparable and it has a warranty. Most headphones and gaming headsets are compatible with this. To make sure their stand is compatible with your headphones, please check the dimensions of the headset bed and the width of your headband.

Brand: Brainwavz

👤I am only leaving this review because the complete description of the product does not state it is a 3D printed piece. The picture of a smooth finish piece made me think it was a mold injected plastic piece. I received a 3D printed item. I will keep it, but not what I wanted. I have a 3D printer and can tell it is from a FDM printer. For people who are interested. Black PLA is printed at 0.2 layer height. Wall count 6 is pretty impressive. Without breaking it, I can't tell. The printer could use some tl smoothers. There is a Again, I am only leaving a one star review because I believe I was misled about the product. I would have printed my own.

👤I was assuming it would be a sort of gloss finish based on the photo on the product page. I received a pack of raw-finish-looking 3D printed headphones. It's not the most appealing look for the product, but they do their jobs well, and anything else would be better. It's easy to miss that this is not a smooth finish, even though the photos depict it. I can't recommend it since it's not all that visually appealing. I think that's important for something that used to hang and display headphones.

👤These were bought to hang two headsets on the side of a media cabinet, made of the same laminated particle board that most user-assembled furniture is made of. I stuck these into place after cleaning the surface. I left the hangers unused for a couple of days before hanging them. The backing has held up well. There is a The best thing about these cradles is that they are arched and don't cut into the padding of headphones. There is a I understand why some would not like it, as some of the reviews state, these do have a rough-cut, textured look to them. I like the look of them. I haven't looked at them since I installed them. They blend into the room as black headphones.

👤I have too many headsets. I needed a way to keep them all out of the way so I could grab them. I bought two 2-packs. There is a The plastic is strong. It is easy to put a headset on the hook and take it off again. I've seen 3M red tape used on dash cams, and it's really strong. This glue is forever. If you don't want it to ruin the finish of the furniture you stick it to, you can wait 10 minutes to remove it. It is easy to remove the leftover glue with the help of WD-40. You just have to deal with the effects of WD-40.

👤I love these. I don't know. I have 5 pairs of headphones that I have accumulated from gaming, but I have no place to put them. I found some really cool mounts for them. They're wide to accommodate thicker headbands, and the mount is larger, so it doesn't cause the foam pad to get damaged over time. They are the perfect size. My audio technicas can hold the headset up with the cable around the hook, even though most of my devices are wireless. I will definitely be investing in more of these when I move to a new place.

6. Acrylic Headphone Adhesive Headset Headphones

Acrylic Headphone Adhesive Headset Headphones

It's comparable and it has a warranty. Most headphones and gaming headsets are compatible with this. To make sure their stand is compatible with your headphones, please check the dimensions of the headset bed and the width of your headband. A nice combination and sufficient quantity can satisfy your different demands, and you can share them with your friends. The headphone hook is practical and light, it is a good way to tidy up your desk, it will save space, and you can use it when you're not using it. The headset holders are made of quality acrylic, which is durable and firm, not easy to break, and the black foam pad design protects your headband headphones from wear when suspended. You can give these hooks to your friends as a present, because they are universal, and they are suitable for various kinds of headphones. They are easy to install with matched quality tapes, and you can stick them to anywhere you want.

Brand: Weewooday

👤I can't peel the plastic 3M label, so they may have changed what's used to adhere to the wall. I can't peel the covering on my long finger nails because I have a long nail. I've given up trying to get that off. I will try to use a command strip. The whole thing is brought up when I try to remove the protective label. See the picture. I was able to get that corner to peel off when I took the picture. It's very difficult to remove the protective label. It's very sticky and has 5 stars.

👤These are exactly what you think they are and how they appear in photos. They're very simple pieces of bent plastic with a thin layer of foam in the part that contacts the headphones, but they do exactly what they're supposed to do and so far, they've held my headphones without issue. They're an inexpensive choice that aren't the most aesthetically pleasing, but they do exactly what they claim and look like they do in photos.

👤These aren't strong. The first broke. All four were broken within a week. I ordered metal to be replaced. The headsets were only held by the children but they got some rough treatment. If you use alternate glue, it may work in another home.

👤I was excited when I bought this because my headsets will no longer be laying around. The glue didn't last long. I had to stick it back onto the wall after it fell again. I had to buy the ones that came with it instead of the ones that came with target. Since then, it has not fallen. I had to buy new tape for it because I think it's not worth the money.

👤It broke after catching on something and the hook came off. It took the paint off the wall.

👤I hung these with the headphones on. They are still tight and up. Prepare for missing drywall if you want to remove them.

👤It's pretty basic but useful. Does it keep my headphones off my desk? If you own wired headphones like I do, I would recommend getting cable clips that are waterproof to avoid having to loop the headphones around.

👤It's good to hold up well so far, just make sure to follow the instructions on how to clean the surface and give the glue time to stick.

👤I didn't know how to put my first 1 on. There is a I stuck it to the wall and then realized it was a tag. There is a I have a few headsets. I have a bag for my work at the side of the desk with a laptop and other bits. I bought them and they were very tough.

👤Works great for headphones and PS5 controllers. It might be a tad expensive.

👤Basic hooks are flimsy at the bend but I hope they survive. I will update if they don't.

👤These were used for the training room at work. They are easy to fix and good value for money.

7. Colossus Controller Headphone Dualshock Steelseries

Colossus Controller Headphone Dualshock Steelseries

There is a package list and reliable warranty. MAONO products have a 12-Month warranty. The Universal Game Controller HOLDER WALL MOUNT works with most third party game controllers. The angle of their hanger has made it possible to reduce the scratches on your wall and controller. The Universal Headphone Hotline: The wide and curved seating bed is suitable for almost every type and size of gaming headphones. The headband will not fall off if the bed is curved. SECURE INSTALLATION Their Universal Game Controller & Headphone hanger mount can be installed almost anywhere, it comes with 3M VHB tape pre-fitted and can be installed on desks, shelves, cabinets, glass surfaces, rear of the TV/monitor, and many more. VHB is used by GoPro to secure their cameras during extreme activities so you can be sure it won't let you or your controllers down. The max weight limit is 1.5 kilogram. Hang your controllers and headphones out of the way so that they don't get damaged and keep your game space free and organized. A universal design to hold both your game controller and headphones in one place looks stylish and is held securely.

Brand: Brainwavz

👤The price is hard to understand because it is 3D printed. I have seen some issues in other reviews, but it seems like it's attached to me. It's the kind of glue that if you're not careful, you can damage the wall. There is a When people complain about the failing of the glue, the easiest answer is to clean the wall and let the glue cure for 24 hours under no load. I haven't been using it for a while. If it fails on me, I will update this review. The controller and two pairs of headphones are still on the wall 10 months later. Don't be lazy, clean your wall and let it cure for 24 hours, it will stay.

👤I use this for my PS5 controller. I have had trouble with it sticking to the wall. It fell off a couple of times, which is concerning since I have very expensive accessories on it. I put more tape on it, but I am not sure how long it will last. There is an update. After it fell the first time, I secured it with tape, but it fell again and took some of my wall with it. I have to go with a no on this one.

👤After about a month of use, the glue started to come loose and I had to make a mount for it on the wall. If you want to have one of your own, you can just look up the file to print it. I think it works as well as it costs.

👤This product looks cheap, and that is the only flaw I can see. It's not the most attractive way to make something like this, but the simple design is elegant enough that you won't be ashamed to hang it on your wall. It looks like any other plastic hanger once you put a pair of headphones and a controller on it. The small hook on the back of the hook is easy to use, and the second hook on the top can easily support a coiled-up headphone cord or controller wire. The hook on the back is not big enough to hold a coiled cord. It might be able to fit both a controller cord and a headphones, but that would be pushing it to the limit, so if you need space for both, this might not be the product for you. There is a The glue is strong and has held up well. I tested it by applying some extra weight and had no problems with the hanger or the glue. It's a permanent home for my headphones and controllers, and it's not showing any signs of weakness. Some reviews have said that the glue didn't work. It's possible that some people got a bad case, but I would point out that it's necessary to clean the surface before applying the hanger, and that you need to wait until it's completely dry. It will work for you if you don't mind that it looks like a piece of plastic.

8. UberAtlas Controller Headphone STEELSERIES Organized

UberAtlas Controller Headphone STEELSERIES Organized

This low-profile headphone hook is designed to match the rest of Kanto's premium desktop solutions and brings you one step closer to achieving that minimalist style you've been craving. A dual game controller holder and phone wall mount. You can wall mount your game controller. There is only one wall mount that holds controllers and headphones. It works with PS4 and PS3 game controllers, as well as most other third party controllers. It's good to hold most headphones of any size. The stadIUM segway is a must have for your gaming setup, it keeps your gamepads organized and looks good. SECURE INSTALLATION Their dual controller holder can be installed on desks, shelves, cabinets, glass surfaces, rear of the TV/monitor, and many more. VHB is used by GoPro to secure their cameras during extreme activities so you can be sure it won't let you or your controllers down. The max weight limit is 1.5 kilogram. Hang your controllers out of the way so that they are not in the way and keep your game space free and organized. One holder for all is designed to hold your game controllers and headphones in one place.

Brand: Brainwavz

👤I put this on the wall next to my futon, but forgot to put my controller and headphones on.

👤It was made on a 3D printer. Within 24 hours, the glue attached to the pre cleaned surface failed. The 3D printed material broke apart. It's complete waste of time and money.

👤After a few days of using it, I really like it. It has an annoying flaw. It can hold up to 2 controllers and your headset, that's what I was interested in. I tend to get up a lot. If you have a controller on the lowest rest, I put my headset down a lot. Every time, the headset will hit it. It doesn't matter which controller it is, the headset will hit it. I can't use the lower controller rest because I've had it fall a few times. I'm wondering if it was worth it to buy this one or if I could have gotten the one with just a single controller rest. I think I will cut out the second rest. If the angle was different or if the head rest part had more room to spare. This would be a perfect score. Everything else is great. The command strip is stuck to my desk and it feels sturdy. If it had more room for the headset, it would be a perfect 5.

👤This makes everything look organized and saves a lot of space. I had to drill a small hole and insert a nail into the wall near the top to make it sturdy, but the controller hides the nail. You wouldn't know if it is 3d printed from a few feet away.

👤I bought two of these for my husband as I was unsure if he would like them. The glue is very strong. When we were adjusting to his likely, it did not peel the paint and we have been holding two remotes and a pair of headsets.

👤I bought this for my husband because he likes gaming. He tried to remove it after he hung it up. It ripped the paint and a chunk of the wallboard. We had to rip off the glue and chunk of the wall so we wouldn't have to hang it again.

👤Didn't realize it was bad. Does not look good. I wish I'd known that before buying. It's hard to tell in the pictures. It should be stated in the description. There is a Injection molded one would have been better.

👤I use mine for my head set and glasses, but always close by with my headset for laptop and music. There is a Good quality and sticks to side. There are three shelves for the head set. It was perfect. It's a good thing.

👤I like this product, but it is not what it states. It is false that it sticks to everything. It doesn't. It was stuck on to a wooden surface and fell off. It had to be stuck onto the wall. It has never fallen off since.

9. MoKo Controller Headphone Switch丨Wall Universal

MoKo Controller Headphone Switch%E4%B8%A8Wall Universal

The folding hooks are very easy to install. The hooks are reinforced with 2 screws. There is one controller. The person is named Holder. The MoKo controller has the ability to hold two controllers and a headset. As controller holder and also as a stand for headphones. Their controller holder is compatible with universal gamepads, such as the Xbox One, XBOX One, XBOX 360, PS3 and PS4. The stand is suitable for universal headsets. Saving your space and money is important. The design of the storage for the game controllers and headset will keep your room organized. You don't need to buy another stand for your headset or game pads, saving you money now. The Switch controller holder is made of high-quality aluminum alloy and is strong enough to last a long time. No one is worried about its bearing capacity or being broken easily. You can install as you please. Their stand can be installed in two ways, by strong glue or screws, which will give you much convenience, just choose one way as you please.

Brand: Moko

👤The controller holder was easy to install and looks exactly like the product images. It holds both controllers. The wall mounted sticker was very strong, so it is important to be careful with installing it. Should you want to go that route, it also includes wall screws. It was a great bang for your buck.

👤My mom bought me a computer. This helps a lot. It was easy and worth it.

👤This product is terrible. Everything is made from cheap materials. The setup was difficult for something that should be easy and after setting it up it was not strong. I would recommend buying a controller from someone else. I was surprised that something so simple could be so bad. I hope no one else buys this so that they don't feel the same way I did.

👤BELLA IDEA! L'ho attaccato con 2 adesivi. senza dover bucare ilo muro, non avrei potuto per la presenza di un telaio scrigno all'Interno. 2 joysticks e le cuffie! There is a In ordine la scrivania di mio figlio, lo trovo. There is a Per mio figlio pi grande, lo acquister anche.

👤It looks great on my wall. The double face tape was easy to install. The rubber on the hangers helps to prevent scratches on controllers.

👤La staffa fa il suo dovere egregiamente. davvero is not a male.

10. Enbiawit Headphone Headphones Headset Mount Installation

Enbiawit Headphone Headphones Headset Mount Installation

Universal under desk design allows for a near universal fit on most desks. There is a new word for it. The Spring Clamp is easy to remove. Not only for storing all kinds of headphones, but also for headsets, glasses, and bags. The Wall Mount Hanger is made of a soft, non-abrasive plastic with a sturdy internal frame and will not scratch your headphones. It is easy to install with included screws. The holder can be mounted on any surface you want. Small design saves more space. The holder is made of a material that is light. The headphone stand has screws that hold it in place. It's suitable for all kinds of headphones and earphones, such as wired headphones, wireless headphones, PC gaming headphones, TV headphones, wired earbuds, wireless earbuds, and wireless earphones. It can be mounted on any flat surface you want, such as desk legs, cabinets, shelves, wall and glass. It can be mounted on any panel. Such as on a desk. Clean the surface by using wipes.

Brand: Enbiawit

👤I like this product. The hook is mounted to the wall. I have it to the left of the white wall switch. There is a The hook is large enough for any headphones. Simple white hook design looks nice mounted to the wall. There are holes for the anchor in case you need more. I was worried that the hook would be too small for Airpod Max, which is a sort of wide mesh top. It's a perfect fit, but can probably fit any other headphones. I don't use the feature, but I like that it has additional holes for holding airpods or ear buds. All in all, what I wanted.

👤I use a HyperX Cloud Stinger for work. I have an ikea desk. I stuck it to the side of the Alex drawers. It feels very sturdy and holds up well. I'm not going to pull this off unless I pull as hard as I can. There is a The HyperX is wireless, so I don't have cables to mess with, but it looks like you could wrap the cables around the front lip of the hanger. There are slots where you could keep earbuds. All of them were very happy with my purchase.

👤I got this for my headphones. I wanted to keep them away from my son. I like the idea that you can use this to store a variety of headphones, including gaming headphones, airpods, tv headphones, and your regular music headphones. I think my only complaint is that the 3M glue that I used on my wall did not hold up as well as I would have liked, the part that was sticky stayed on the plastic and the rest of the glue was on the wall. I tried applying the command strip to the sticky part but it didn't work. I was able to remove the sticky part from the plastic and get the glue off the wayy with no damage or problems, and I placed the command strip on the plastic to the wall, and it has been up there with no problem. If you're going to purchase this, you should take into account something, like command strips. I need it and it works just as I need it. My headphones are out of the way now.

👤My desk is not cluttered because my headphones are held for work. They are a good purchase.

👤It's very easy to install and fit, I screwed it into a stud and it's not going anywhere.

11. Headphone Universal Sennheiser Audio Technica Controller

Headphone Universal Sennheiser Audio Technica Controller

The package weight was 5.15 lbs. Easy access to your headphones. The long curved support is made of a soft, non-abrasive Silicone cover with a sturdy internal frame. A multi-purpose hanger. It's great for hanging cables, earphones and other gadgets. The max total weight is 1 kilogram. Clean and organized space. Installation is virtually anywhere - on walls, cabinets, glass surfaces, monitors, desktop towers, etc. You should organize and tidy up your workspace. Convenient installation. It uses double-sided tape for strong, reliable adhesion. Clean surface well using provided wipes. Allow the holder to be used for 24 hours. It is not suitable for use on wet, greasy or dusty surfaces.

Brand: Avantree

👤It worked well for a while. One day, I walked into my room and heard a noise. I was trying to figure out what fell, but realized it was my headset. I followed all the directions after having it for less than 3 months. I pressed the alcohol wipes against the sruface to make the surface clean. After hanging it up, I made sure to not use it for 24 hours. It still fell despite all that. They need a better stand. I'll probably buy something to keep it. It was unfortunate it didn't hold up. There is a Customer service contacted me saying my previous 2 star review was detrimental to their reviews. They gave a free replacement. If they think the 2nd will hold up, I'll change the review. I'm not going to change my review if the second product does the same thing as the first. They asked me to send the email back to them, after they lost the previous messages. I did. They responded with nothing relevant to what happened before. I'll take it down to just 1 star now that I know their customer support isn't helpful. This isn't worth the headaches if you buy it from someone else. There are two edits, the first one is called Edit 2. I bought my own double-sided tape and it seems to be holding up well, so it's 3 stars. Customer support is very determined to make sure I like their product. I didn't use the new one because I was expecting the same thing to happen. If you rely on the glue, then you should buy any other glue.

👤I bought this item on December 13th. The stand has begun to separate from the glue. I was expecting this accessory to last as long as I thought it would. I had thought I would get at least 6 months out of it, considering the brand of glue they chose. I always took care to place things on it gently. The back of the rubber/plastic hanger and the desk it is attached to have begun to separate from the glue that is attached to them. The stand was rated 5 out of 5 for its function and 2 out of 5 for its longevity. Customer service was 10/10.

👤I used to get different types of L-shaped things. I changed my mind after reading reviews about people getting dents in their headsets. There is a This thing is awesome. Stick to a wall and it will hold up a heavy, wireless, headset. I attached one to a desk as well. I picked up a set of two for a very competitive price and was happy to return for more, and they were even cheaper. I can't say for certain, but I can say that you get your money's worth. There is a If you feel like you have a heavy headset and need more support, you can get a double-sided mounting tape. There's enough here to support 20 lbs of weight, and 3M makes the absolute best. The back is large enough to double the amount of tape holding up whatever you're trying to hang on the rounded mount. It's cheap for the amount you get.

Summary

What is the best product for headphone mount wall?

Headphone mount wall products from Lamicall. In this article about headphone mount wall you can see why people choose the product. Eurpmask Choose The Color Of Europe and Latomex are also good brands to look for when you are finding headphone mount wall.

What are the best brands for headphone mount wall?

Lamicall, Eurpmask Choose The Color Of Europe and Latomex are some of the best brands that chosen by people for headphone mount wall. Find the detail in this article. Evecobo, Brainwavz and Weewooday are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com