The convenience and company are two things. Their headset hanger is compatible with major brands including Bose, Bose, and Audio-Technica, and is 5 cm at the headband. Even the largest gaming sets can be held with ease. The mount has a surface area twice the size of the original for an incredible hold. There is a built-in cord management. The cords are secured under the desk by the stowStrap. The premium glass reinforced composite body is twice the strength of cast aluminum and has the perfect amount of friction. There is an optional screw mounting hardware. An extra 3M pad is also included.
👤Wow! How did I not notice this product sooner? There is a I own several headphones. I have spent a lot of money on stands to display the headphones. I find that some of the stands take up a lot of space on the desk counter as my workspace shrinks. I found this product through a deals website. I had no idea that there was aNCHOR PRO, but when I saw it, I thought to myself, "What a great idea." " I could have gotten the standard version for less. I decided to spend a few dollars more to get the Pro because I was interested in the cord-management feature. I'm very happy that I did. The anchor feels something. Like an anchor without the weight. It is a very good product. You can either use the 3M tape or the included screws to install the anchor pro. You can't go wrong with the tape. I was very pleased with the strength of the install. I pressed the anchor in place beneath my workspace after removing the protective cover. Before hanging your headset, it is important to let the anchor sit for 24 hours to "cure" There is a A tug at the attached anchor gives me a sense that this thing is not going away. The product is kept in place by the strong glue. The PRO version is the best for the cord management system. Two very high-quality cord managers are included. You can thread your charging or headphone cord through the clips if you unclip them. The clips have glue on them, which makes them easy to misplace. I use this for my headphones. The ANCHOR PRO keeps them in place. The cord system keeps my charging cord ready. This is an amazing product that is used and quality is excellent. Go ahead and purchase this product.
👤I did not purchase this product for headset organization. I was looking for something to hold my two lantern flashlights. I wanted a product that could be screwed under a cabinet. This product fit the bill. I put it under the cabinet in the laundry room. The flashlights are easy to see and can be charged right where they are. I did it because I didn't want to move the dryer. I wanted to be able to easily remove the hook in the future, so I didn't want to use 3M tape. The manufacturer included a drill bit for the screws. How often do you see that? Not very. There are two pads in the package for those who want to use the tape. One is on the hook and the other is the backup. If you want to, you can remove the tape from the hook, but it gets stretched out. I took it off, but realized I needed to put padding between the hook and the cabinet or my flashlight handles wouldn't clear the little wings at the end of the hook. The hook is useful for mounting my flashlight.
Two preset heights give you maximum control over the level of your computer screen to improve posture and prevent neck and back pain. There is a notice. It is not possible to use it for painting a wall. If you paste to the wall, it will fall down. Make sure the surface is smooth, dry and oilless, and hang your headphones after 24 hours to make sure the hanger is firmly stuck. 500g is the max total weight. The headset holder with a magnet can be used when it is not in use. The arm of your headphones is covered with a soft rubber pad to protect it from slipping and scratching. The headphone hook has a strong sticky design, which can be applied to any smooth and clean surface. Hold your earphone in a firm position. Remove the sticker and stick it under your desk. It's great for hanging cables, hats and other gadgets to the kitchen counter, bookshelf, studio and company. A multi-purpose hook. The under desk mount is compatible with almost all wired and wireless headphones.
👤Does what it says it does. No issues.
👤I like the design. It's easy to hide and doesn't get in the way. It flips closed when you don't use it for headphones. It was easy to install, just remove the paper from the device and stick it on the spot you want it. The second adhesive pad they sent will help if The adhesive ever wears out. Overall, a great purchase, it does what I wanted it to do.
The rubber padded headphone is used. The rubber pads design of the headphone stand will make sure that leather headphones are protected from scratches. The base is made of natural marble and has a wide variety of colors and patterns. Each marble base has a unique style and taste. The beech wood supports the headphones. The smooth curve of the wood can protect your headphones from scratches. This well-designed headphone hanger is a great decoration for your home, office, studio, or wherever you use your computer. This wood stand is compatible with many headphones. Beoplay H9i, Astro A50, etc. The marble base can be assembled with the simple tools included in the hardware pack.
👤The marble and maple stand is very attractive. It holds the headset well and the shape is great for not changing the padding. The base is heavy and won't tip over. It was broken when it arrived. The base is heavy enough to break the connection between the post and holder. It was easier to fix it with wood glue. The packaging needs to be changed.
👤I would buy it again. It's easy to put together and it's weighted so that it doesn't tip over if you have heavy headphones.
👤The product is easy to assemble and looks great.
👤I love this. Adding a couple to the collection is something I'm thinking of doing.
👤Bekannte gekauft, fr deren, ist den Kopfhrer Shure Aonic 50. There is a Passt perfekt, die Auflage ist. Ich ist die kleinen Flche eingedrckt. Die Ohrpolster ist die Hrers knnen frei hngen. Sondern knnen. Ihren spektakulren Haltern, die den teuren Hrer ruinieren, ist wie manchen bldsinnig. Im Einrichtung passen Holz und Marmorfu. So an. Es ist schn, und hat unten in Moosgummipolster. Alles in allem are guter Preis-Gegenwert.
👤There is a Produkt. Leider is a person. berhaupt ist, passt die Marmor. I am gerne behalten.
👤Zu. It is called weihnachten. Geschenk bestellt. Ihren Fotos ist aus wie. Es ist gut. Weiter empfehlen!
mounting on computers, desk and wall is durable. The headset holder for desk and cup holder desk makes it easy to reach your headphones and drink bottle while working or playing computer. The cup holder under the desk holds your headphones, bottle, or tumbler. The mat is non-slip to keep drinks from spilling. Keep your desk clean and tidy with the Double Headphone Cable Organizers. It keeps your desk free of stuff. The desk headphone holder is very easy to install and can hold up to 5 kilograms. The rubber padded headphone is used. The rubber pads design of the headphone stand will make sure that leather headphones are protected from scratches.
👤The bottom cup is only accommodated by the cup ring. No water bottle, thermos, or coffee cup. The retaining ring has a diameter of 2.5 inches. That's not for a large cup or a medium cup. The ear phone rack works.
👤I was looking for a cup/beer holder and double headphones holder. This is not plastic, it will last you forever. Highly recommended!
👤Don't expect this to hold a lot of cups except the one in the picture. Have it look weird if you bend it out. It's not very secure to hold a cup. The headphone holder works well.
👤The Headphone Stand has a lot going for it, but it isn't quite right. It's well designed and constructed. It is a mixed bag. There is a Good design. Two sets of headphones have small cutouts to hold and organize cables. Even has a cupholder. It didn't fit in my desk. The jaws on my desk are too small. The headphones are hard to get at when a call is made, because they are close to the table top. I like the stand of the headphone. It didn't work for me. It would have at least one star if it fit my desk.
👤That is a huge win in my book. It is easy to assemble with 2 screws. The only soft rubber you can see is the screw pad that holds the table in place. You can hang your cable of headphones to the notch so they don't dangle. The cup holder is strong enough to hold my water bottle or coffee. A clean look and functional.
👤This is a good quality accessory. I'm not worried about the cup holder. The rail is not very high. I would knock the drink over onto my cans. It is easy to put it on my desk and it has the two standard sized headphones that come out. Excellent item.
👤If you have a thick enough table and room to hang it without hitting it with your legs, it's great for a gaming table.
There is a 2 year satisfaction guarantee forValuable gift for Christmas, Thanksgiving day, Easter, Birthday, Valentine's day and more. Hook can hold up to 10 pounds. The heaviest headphones weigh about one pound. 3M VHB tape is used to adhere the aluminum material and soft silicone pad. One headphone hanger with 3M VHB tape. mounting on computers, desk and wall is durable.
👤The frame doesn't bend without some force applied to it. The color of the product is great, but it doesn't scratch easily, like some other products that will scratch and ruin the look. Installation is the easiest thing in the world, stick to the spot, good to go. There is a There are pros and cons. My circumstance doesn't allow me to use the provided screws to install the hook. I bought this product because it came with a sticky pad. I have headphones that are not much heavier than the ones I use. The sticky pad didn't stick for long. It may have started peeling away from where it was placed a week before. I thought it might have been a mistake, but it wasn't. It's a very simple fix, I just bought better double sided tape and I haven't had an issue with it after that. I had to go out of my way to make it better, so I had to dock it some stars. That may be useful information for some people. The tape was not very good, but I am happy with the rest of the product. There is a This style of hook is perfect and many prefer it over the above desk ones. If you are able to do that even better, the color doesn't chip away, and the material comes with screws if you are able to do that, I would recommend this product over others. If you plan on using it that way, you should install a better quality double sided tape.
👤I didn't expect the glue to bond to my desk to be welded on. I am either weak or it has its own pull that was reinforced using superglue. It's important to plan where it's going to stay.
👤I put this under my desk with the 3M double sided pads. It is small but works for my G930's. The material is very strong. There is a The best part is that they included small clips. I was able to run the charging cable cleanly underneath my desk. There is a Overall happy. It was a bad deal for the quality.
👤I stuck it too close to where my legs were, and it would occasionally hit me. It sticks very well if it does what it's supposed to. The HyperX Cloud II headset is in place.
👤I can't stand the amount of stuff on my desk. I did not want a headphone rack because it was at risk of being knocked over. The metal is heavy for its purpose and won't bend. The mounting tape did not work. I used the screws that came with it. It was kind of annoyed. I didn't want to put holes in my desk. Overall happy with it.
👤The purpose of it is to serve as a headphone hanger. It is made of aluminum and feels sturdy. The only reason I'm giving it two stars is because it's not as advertised. There are 4 holes in the hook. Two (2) are located in the center of the hook and two (2) are located towards the top of the hook, which has slots to allow sliding the hook onto screws. I don't care if it's not what I ordered, since it does its job and I don't see it under my desk.
The curve shape makes the stand more stable. Designed to protect your headphones. The Arch bridge shape allows you to put the headphones, game controller, cell phones, and mp3 player on the middle of the headset stand, so your computer desktop won't look messy. The material is made of walnuts and is smooth, comfortable, and eco-friendly. Function: The stand is designed to keep your headphones out of the way of dust and scratches. The stand is sturdy and has rubber feet on the base to keep it from sliding. There is a 2 year satisfaction guarantee forValuable gift for Christmas, Thanksgiving day, Easter, Birthday, Valentine's day and more.
👤The piece is strong. The arch is cut with a band saw and is unattractive. If you remove the base, you can use fine sandpaper to make the edge softer, but the veneer is so thin you can't see the wood in the next layer. I did not attempt to glue the base to the arch, but returned. The saw blade marks are visible on the laminated edge. The surface is smooth. I could have refinished myself. I would have liked to have kept this, except for the crude joint between the arch and base.
👤There are no complaints about this stand. The stand is elegant and has nice layers of wood and veneer. Lower your expectations on fit and finish. Some quality problems are revealed by looking closer. There is a The upper arch to support the headphones and the lower arch that stands on the desk are both screwed together from the bottom of the lower arch. The screw holes are messy. They are out of sight so there is no big deal. It surprised me. The two arch pieces meet in this location. There is a noticeable gap on each side of the joint. It is roughly cut and finished. If I had to guess, a band saw would cut these without much sanding or attempts to make the joints appear curved. The intent is to have the stand appear as a single piece of wood but these gaps and rough cuts kill the design up close.
👤The stand is sturdy. The padding on my Bose headphones became stuck to the stand. I have to throw the stand away and replace the padding on the headphones.
👤It works perfectly with my Sony MDR-Z7 phones. It looks more expensive than it is. I don't like manufacturing defects and I won't see any on this. A reviewer said that if you turn it upside down, the pilot holes for the screws that hold it together are missing. Don't turn it upside down, it's impossible to make soft plywood with a sharp angle, and you can't get any chips, so get over it. Enjoy!
👤This is a great stand for my headphones. It is an absolute beauty and looks great in any setup that I have it in. I was worried about it tipping over, but I no longer worry about that, and it helps shape my headband. I mean by that because my previous stand had a bar at the top that was stretching out my headband, but now the stand is curved, which makes it easier to fit my headband in. There is a In the humid environment of Hawaii, my headphones are going to end up sticking to the stand because of the shiny coating on them. I hope the ear pads on my headphones are not expensive. Time will tell. I would like to see a different version that was more of a matt finish. It would look better, and it would also eliminate the worry of my ear pads sticking to the coating. They're worth the money. There are a few manufacturing issues with these items, but it's not unusual.
It is easy to carry and install for beginners. The controller holder is perfect for universal video game controllers, including the PS3/PS4/PS5 and Nintendo Switch Pro controllers. Get 4 packs holders in one amazing package and enjoy your controller museum. The foldable wall mount controller holder is an upgrade to the previous design and will allow you to free up more space for your game room. It can be opened or closed. The controller is out of the way when not in use. It's a better angle to display your controllers. The two methods of installation are strong and simple. Max. The load was 3.3lb/ 1.5 kilo. The screw and anchor installation is a more secure option. Max. The load is 6.6lb. The controller holder can be mounted on the wall, beside the desk, behind the PC monitor, and on the shelves. You can show your controllers anywhere you want. Giving the controller a safe home is multi-protection. The sitting bed of the controller holder has an anti-slip pad to protect it from being scratched. The controller will not fall out of the holder if the raised baffle is used. The package has a foldable controller holder, strong glue, screw, and plastic anchor. You can enjoy a long-term peace of mind with the included 12 months warranty. If you have a question, please contact them by Amazon message.
👤I bought a similar wall-mount for my husband. We have a cabinet next to his desk that I mounted to his desk, and when I saw these, I realized they were perfect for organizing his console controllers. I mounted all of them on the cabinet with a couple of inches between them so the controllers wouldn't hit each other. The mount design is universal, so it fits the PS5 controllers as well as his PS3 controller. It was easy to mount since it was two small screws. I did not need the anchors. Getting them level is not a problem if you know how to hang things by screws. The sticky pads can be used as guides for the screw placement. I had to tighten them down a little at a time until they were snug enough for the cover to slide on. I handled them with care because they are plastic and I wanted to be safe. There is a The design and ease of use are both good, but the material is not as durable as I would prefer. I am leaving my review at 5 stars. I would buy more if I could find another place like this where I could de-clutter.
👤I have been using these for the past 4 months. These work well to keep my controllers off my desk. It's nice that they fold up when you don't use them. I wanted to warn you that you should not use the included strips. Those strips are great at keeping the mounts on the wall, but they are not strong enough. I had to take these off the wall and it took me a while to unstick them. I used a heat gun to get the glue off. If you don't want to drill holes in your wall, then I would recommend that you use command strips. They work just as well and are a lot easier to remove from the wall. The other things are great. The heat gun I used to get the glue off did not damage me.
👤It uses either screws or glue for installation. The glue should work well for most purposes, which makes it easy to install.
👤I would give more stars if I could. I used my own heavy weight hook. I stuck them to my wall. They fit every controller I have and they're a good fit for a phone. When not in use, it folds up and out of the way. I'm getting more of these.
👤It works best on xbox and switch controllers.
👤This was the perfect product for my husband, who wanted the controllers to appear like they were hanging by themseleves. The controllers fit well and they were ready to install. No slipping or falling out.
👤I love these so much. They're sturdy and come with screws in case you want to screw it on. I like that I can display my controllers and still be rental friendly.
👤These are effective. I like the convenience of their design. I own every controller in the house.
It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc. Small and foldable design saves space. It can be used to free your desktop from chaos. Safe and Stable: The headphone stand has strong glue that will allow it to last a long time. The materials are high-quality. The rubber pads on the headband protect it from wear. All kinds of headphones, such as wired headphones, wireless headphones, gaming headphones, TV headphones, and so on, are suitable for the universal headset holder. It's easy to install and can be mounted anywhere. On computers, desk, and wall. Clean the surface by using wipes.
👤I was very happy with my purchase of this headphone holder, but it has been a year since I purchased it. I noticed that my headphones got in my hair when I noticed the odd goop on the bridge. The pull out bracket that my headphones rested on was the culprit. I was able to use alcohol wipes to remove all of the liquified glue and I was also able to repair the small pad that locks the brackets in the closed position with some automotive grade 3M double sided tape. Hopefully it will hold up better than what was used to assemble it. Is this the end of the world? I am going to keep an eye on it because it was a quick repair.
👤I have a charging station in my laundry room. The hug makes it look less cluttered and it gets a lot of stuff off the counter. I charge a lot of stuff on this station. The double sticky tape is used. I made it even more solid by attaching a couple screws to the holes. Unable to keep earbuds and headphones off the countertop while charging. If you don't have anything to hang on it, this is a great option. I'm very happy with the space that was cleaned up.
👤The option to screw it into your desk is what I bought this hook for. I tried the glue before I tried to put it in. I had low expectations, but the sticker is so strong that it's like a combination of Ultimate Warrior and Hulk Hogan. I'm thinking about buying another one for my towels.
👤My father built a desk for me that is solid wood. It was built for writing, not a computer. I used the glue that came with the product because I couldn't drill a hole in it. I have a very light-weight Sony headphones, but they haven't budged over a month. The hook portion is large and padded to not damage my headphones. I might put two different pairs on there. I love that when I move this desk, I can just close the hook and it won't be a problem. There is a The metal is heavy and shiny. It's a good addition to my desk. I wish it didn't have the logo, but it is perfect.
👤Unfortunately it did not last. It fell off my wall in the middle of the night, luckily it didn't break my headphones, I was sleeping. It was loud. I might use it on a wood surface with screws to hold it up instead of giving it to someone else. Holds fast to painted plaster. I've considered buying another one just for the tape. It has been on the painted plaster walls for a long time. It holds my headphones and doesn't bang when I place them down. The inside of the "hook" is made of some kind of material. It doesn't open without you meaning it to.
👤This is what it seems to be. I thought it would be bigger but it is not. I used the two screws instead of using the glue to stick to the wall. I would have been concerned that the headset wouldn't hold it's weight. There is a This looks great on the wall. When I moved my console, I realized I lost the space I wanted for the headset stand and that's when a hanging stand became optimal. This is in front of my console. It's difficult to pull it down when it's folded up, because you don't have headsets on. I think that will loosen over time with use and shouldn't be a negative.
The dual Headphones Hanger under the desk can hold two headphones at the same time, with a headband width within 2.1inch. You can charge your smart device without a plug in wall with the 5 port smartusbcharging unit. It can detect your device and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amps overall. You need to use different ways to hold your under desk, so come with 2 screws and 3M VHB tape. Please clean and dry the surface of the desk and stand before you install it. Wait 24 hours before using. 6 cable management hooks for keeping cables neat and organized are included in the cable organizers. Saving space for your phone and headsets is helped by it. Can hold two sets of headphones. The arms are not the same. Their promise is to make sure you are 100% satisfied with your purchase of their products. They will give you lifetime warranty service if you have any questions. You are both a customer and a friend.
👤This is very nicely placed under my desk. I don't use screws because the tape looks strong. It supports my headphones. There is a The side wings have a notch on them. It saves space and I don't have to have a headphone holder. There isn't a way to turn off the blue lights. Overall 5 stars.
👤I have a tv stand above my couch that makes it hard to charge my phones and controllers. The kit does a great job of charging my equipment. I used screws instead of tape and it was easy to install.
👤An amazing find. I used 3m double sided tape. It does come with some tools to set it up, but mine didn't damage it. I like it. If you're looking for a way to charge your items without having to use an outlet, then buy it. I wire managed it, but it is not a brick charging point. A long cord is attached to the item.
👤I bought this stand to keep my headset out of sight. I used the screws that came with it to attach it to my desk, so I can't comment on the strength of the 3M tape. It's made of plastic and doesn't feel weak, but I'm afraid to hang up my headsets. It comes with a screwdriver, brackets to help guide the power wire in place under the desk, and double sided tape for the brackets. The built in ports are nice, but it would have been nicer to have a few more ports.
👤I like this thing. It keeps my things out of my way all the time. Everyone always needs moreusbs at your desk. The screw brackets and sticky tape are pretty good. I used double sided tape because I was skeptical if it would stick in the middle of the night. It seems very sturdy for the price. Would recommend. Everyone with a computer needs one of these.
👤I used to have a small extension cord with 3usb drives that I used to charge my phone, headphones, watch, and other things from, but I was short of the 3.0 rapid charge. The device solved my issues and gave me a place to hang my headset. The wings are barely big enough to fit the headset, and they seem a little flimsy.
👤The unit is described on Amazon. I was surprised that the box was not sealed when I received it, as I thought it had to be. Some of the 3M tape was bent up, but still applied. Time will be the most important. I plan to take my devices out of use after being charged. Rather be safe. There is a My desk is cleaner because I have a place to put my noise canceling and headsets. God bless!
👤The "wings" that hold a headset aren't long enough to hang anything from, and it doesn't attach well to my power strip. Does not help with cable management. Disappointed in the work.
There is an optional screw mounting hardware. An extra 3M pad is also included. The foundation for your headphones is made from solid wood. Give your headphones a stylish resting place and keep your workspace clean and organized. It fits most headphones with a headband width of 1.57 cm and device height of 9.84 cm. It's a unique decoration for home, office, studio, bedroom or next to your TV because of its environment friendly nature. The curve shape makes the stand more stable. Designed to protect your headphones.
👤I am very happy with the leather covered stand I bought. It fits all of my headphones. The stand is sturdy and looks good. The stand height and stand width are taken into account when determining the ear cup width. If you have large round ear pads, the stand width may be narrow for long term storage of your headphones. The height is fine for me.
👤I own a pair of Bose Quiet Comfort noise-cancelling headphones. There is a The Bose headphones fit right on this. There is a The Kokoon's also fit. They are larger and heavier than Bose, but they are not so large that they look ridiculous on the stand. If you don't want any kind of overlap, look elsewhere. I use the stand more for the Kokoon's because they need to replenish their batteries, so I have a place to put them. I wanted a black wooden stand, but at the moment there isn't a great selection for that on Amazon, since the width is only 3-inches. There is a The quality of the stand is very good and not likely to fall over. I wasn't concerned with the fact that most headphones won't be one-handed, especially if your headphones cling to the head.
👤It's difficult to remove your HP's with one hand from the unit without snapping your ear cups together, and the Omega style of stand will compress your ear pads premature. It doesn't add to the longevity of your headphones.
👤My wife was always leaving here with expensive headphones on, begging to be stepped on while she was working from home. I had seen stands like this before and they looked like a good solution, but they were more expensive than I was willing to pay. I decided to give it a try as a Mother's Day gift after I stumbled upon it on Amazon. The Omega Walnut color is very well built and looks really nice. My wife likes it and her headphones are now safe and out of harm's way. It is recommended for anyone looking for a safe way to store their headphones.
👤The construction is attractive. The part that supports the headphones' depth is a tad over 3 inches. These are useful for smaller headphones. The "on ear" type is the largest recommended. The types around the ear would partly hang off the wood. Other models have a depth that is at least an inch deeper.
👤The item is in black leather. One foot on the stand was a bit loose after the wrong item was received. Called, returned, and received the wrong item again. It was a gift and I'm a bit annoyed. Had the correct item been sent, I think it would have been a hit. If you can find a stand that is cheaper and better, then buy it, as I don't think it's worth what you paid. I can't recommend buying it from the seller.
👤I have different styles. I use them to hold headphones. They're lovely, the wood is sturdy, good finish, and they fit all major large full size headphones without a problem. They're so cheap these days that you can't get them for less than $20, which is fine with me. Good standing.
Universal design - hold your headphones and controllers in one place. It applies to a bag, umbrella, backpacks, keys, cables, etc. To accommodate accessories, please adjust the little arms of the hanger. 1 Hanger Holds 2 The dual arms of the headphone hanger can hold two headsets at the same time, keeping your headphones organized and ready to use. It is compatible with all headphones with their headbands within 1.37inch. The headset hanger is widely used under the glass, wooden or metal desk, table, shelf, cabinet in the home, office, dorm, cyber cafe and other scenarios. It could also be used to hang other items, such as purses, shopping bags, umbrellas, etc. A neater environment will be created with this hook. The design is user-friendly. The mount is lightweight and sturdy with premium aluminum, so that it won't break even if you hold the heaviest headphones. The raised tips on your headsets prevent them from falling. When you need to replace something in unforeseen circumstances, you will be able to do it with extra glue. Two mounting methods. The headset stand can be mounted without causing damage to the desktop surface, and it can hold up to 4.4 lbs. With screws, the headset hook could be installed for more firmness. Choose the installation method that is right for you. You can get a refund within 60 days or a free replacement within 12 months if you have non-human reasons. You can contact them via Amazon Messages if you have any questions.
👤This double-hook headphones holder does exactly what it is supposed to do. It holds two pairs of headphones side by side. The double-sided hook makes it easy to store and remove your headphones from underneath a desk or shelf. I gave the Adhesion category a 4-star rating, since I have only been using it for a week and it has a tight seal. I am confident that it will be long- lasting since it is made with a 3M adhesive and includes a replacement strip. There is a It is recommended that you allow 24 hours for the glue to seal completely before hanging your headphones. This is part of the instructions. I purchased this one because of its design quality and price, and I am very satisfied. I hope this insight helps you make a buying decision, as I am not an employee of this seller or a representative of this industry. All the best!
👤I couldn't find a way to hang the heat gun on the side of my crafting table after I bought it. Many of the headphone hangers are plastic or foam, and I thought they would be perfect. This one is made of metal, not plastic or foam. It's the perfect size to fit under the edge of my crafting table for my heat gun. The gun is held with the nozzle up so that the heat won't affect the motor. There is a This comes with a glue to stick it on, but also a couple of screws to put it in my table. This isn't designed for this purpose, but it fills the bill perfectly.
👤I wanted to hang my headphones under my desk. The desk has a smooth bottom that should accept the included glue, but I decided to use the included screws just in case. It was difficult to install the screws due to the design of the headphone hanger. Since a screwdriver cannot be driven at a straight angle, the screws need to be put in at an angle. I predrilled the holes for the screws, but since the screw goes in at an angle, it sheared the screw off. I was disappointed that the screw sheared so easily, and the design made it nearly impossible to install the screws, because I was using a hand screwdriver to drive the screw. It is a good material and slightly smaller than I thought.
👤I like that it's double sided and works well for my purposes. It will be too narrow for some headphones. I found the measurement listed to be accurate. I only use this to store one pair of headphones and the other hook for hanging cables that aren't in use. I would like to secure it with the screws provided, but unfortunately the way it's designed makes it difficult to approach from an angle. I'm not sure how you could get the screw all the way in. You would need to drill a hole before you install the glue, and poke holes through it, so that's something to keep in mind. Unless you plan to put something heavier on this, it's not necessary. I wouldn't try to use the screws for something like a bag hook because they are small and mount from two corners.
Headphone mount wood products from Elevation Lab. In this article about headphone mount wood you can see why people choose the product. Lamicall and Kes are also good brands to look for when you are finding headphone mount wood.
Elevation Lab, Lamicall and Kes are some of the best brands that chosen by people for headphone mount wood. Find the detail in this article. Wixgear, Yocice and Onegenug are also brands that their products are worth to check.