Replacement earpads are made from foam and leather. Give your headset a new accessory. It should be a brand new look. Product dimensions are 5.35 x 1.33 inches and the color is black. The package has a headband cover.
👤I used this to replace my HD598. I stumbled on this as my best solution after researching online and Geekria's other solution with a zip up cover was tempting, but this was cheaper and would replace my headband. It's a good fit with more padding, even though the color doesn't match. It's not clear whether that padding is better. It's still good for the price because I think it offset the position of my head/ears a little too much. The HD598 owners' headband pad is slightly shorter than the original one, both in length and width. The width needs to be longer at the middle and the length needs to be a little longer at the ends. This is a straight width.
👤Even though the headband pad is advertised for headphones, I decided to fit it to my K550's. I found out that this model of headphones is hard to find because of its reputation for pad wear on the headband and ear pads. I bought the headset used online for about $50 and was pleasantly surprised by the sound, so I decided to use it. I found ear pads fairly easy to use. I read a lot of reviews and many of them complain that small things can affect the sound of the headphones. I think I'm lucky that the size of my head works well with the ear pads I found, because I get a good seal around my ears and a good sound. The headband pad began to peel off after finding earpads. I measured the metal headband, and it seemed like it might be close enough to work. I installed it today after it arrived last week. There is a This pad is slightly thicker and longer than the original one. I was able to do enough of a dry fit even before removing the old pad to realize that it would make the headset sit just a little higher on my head, but that brought the earpieces (speakers) only slightly higher on the ears, so that seemed acceptable. I realized that the earpieces wouldn't go all the way up to the #1 setting on the headband markings on either side with this new pad in place, but if I centered it properly, I could get each earpiece to go up as high as setting #2. The ear pads are dropped down a bit to the same spot on your head as the headband with a thinner pad. It looked like it would be a wash. The extra length would make them fit the same as before, but provide more comfort because of the thicker headband, which is a common complaint in the more negative reviews. The metal headband needs to be ripped off first. Depending on how clean you want it to be, you might spend a bit of time peeling off the bits that remain. I used some goo to clean the remains of the old pad, which was close to the edges of the metal headband. I didn't try to remove all of it, but I was reluctant to clean the center of the headband because I was afraid of damaging the ribbon cable. If I cleaned up the edges of the old, the new pad would cover it all. I stuck the new pad on after letting it dry completely. You can peel the backing off the new self-adhesive pad, center one end of it, between the 1 and 2 on the left side, and roll it onto the metal headband if you're ready. I've been wearing them all afternoon at work, they sound good, and I'm enjoying the feeling of accomplishment that comes with a successful project. It saved me money, but I'm happy with the result. This is a good choice if you need a new headband pad. Not quite a drop-in replacement, but as close as I've found, easy to do, and looks good, as long as you're not in a rush. You will be very pleased if you take it slowly.
The package includes a headband. Most of the big-sized headphones are compatible. Quality materials and design, made of high-quality knitted fabric. Improve the comfort of headphones. It is easy to install a headband without tools. It can be washed by hand or machine. The headband cover for the headset can wrap the headphones beam. The package contents are listed. A headband cushion. The alcohol pad is x2.
👤The Corsair Gaming H2100 headset still works great, but over the years the leather covering on the headband had started to chip, so I didn't want to use them anymore. I was covered in black particles when I put them on. I ordered this to fix the problem, and it did. I took a toothbrush to the original headband and used a cover to cover everything. It was a tight fit, but works well. It looks good, but it's not as comfortable on the top of my head as the original headband is, but it's not bad. I'm no longer covered in black.
👤The cushion on my headset is terrible. This is more of a covering than a cushion. This will hide the scratches or cracks on your headset.
👤I was looking for a quick and easy solution to repair my Audio Technica A50s, and this truly delivered for something that does not require sewing. There is a The material is stretchy and easy to install. The headband cover was cut to length and tucked under the edge clips for a clean look, but I did not do it myself. The color of the clasps is something I don't like. The cover still looks good, even though I wish they were black. I like cloth over leather because it's easy to clean. The cloth ear cups I got have given my headphones a new lease on life. If I decide to add padding to my headphones headband, I might buy this cover again. There is a This is a quality product that you will not regret buying.
👤This thing is a simple cover over the headband. If it fit well, there are bumps on it where the fabric isn't sitting right, and it's digging into my head. It's making my head hurt after about a month of use.
👤The headband cover is easy to use. The headband overhangs the end of the plastic headband and is too long for M50, so it's the main challenge. It's not noticeable when I wear the headphones. It might be a deal breaker if you are a visual perfectionist. They have been great. It's difficult to make a product work.
👤This adds no cushion at all. I have dish rags in my kitchen sink that would provide more padding. It's a cosmetic upgrade. I own an Audio Technica -M50x. The product has to be stretched so much to get around the headband that it's not as thick as it appears in the pictures. I can't even add my own padding to the stock headband because it gets compressed into a solid mass and is just as bad as the super tight stretching. It's disappointing. I can't recommend this product because it's currently advertised.
👤I tried the package for a full day. Installation is easy. I will have to see for myself if the material is elastic and hard enough to hold for a long time. If my impression changes in the future, I will update. My suggestion to the seller is to make the whole cover 2 cm longer so that it covers more of the headphones. If the buttons are inside, it will be more elegant. I am a pro- user. I'll be happy to purchase more and recommend it to my colleagues if these suggestions are actually done. There is a I highly recommend it for most AudioTechnica headphones. I have never tried it on another, so I don't know.
The HD280, HD 280 PRO, HMD 280, HMD 280 PRO, HMD280-XQ are compatible with the Sennheiser headphones models. No tools needed for a quick and easy replacement. The material is high quality. The memory foam has a comfortable fit.
👤The old headband on my computer needed to be replaced. I took one star off because it is manufactured straight and doesn't have a slight curve like the original did, which causes it to be a little squishy in the middle and for the ends to be lifted up. This is not a big deal. There is a stock headband next to this item. Since this is the only replacement I've been able to find, I would definitely recommend it.
👤I bought these along with a new set of headphones because they were less expensive than the factory-replacement which cost more than half of a new set. I didn't want to spend $50 on padding when my HD280's broke where the ear-cups extended. It's better to replace the whole unit. The price of these pads made it attractive to fix up my old pair and get what I can out of them until they fail. There is a The padding works like the original. It is comfortable. The material that holds the ear pads to the ear cups is a bit thinner and less durable than the other materials. I thought it might be due to hardened plastic, but when I compared it to the ones on my new set, it was not the case. Time will tell how well they will hold up. I won't complain about the price difference. There is a The ear cups have a challenge stretching the plastic over and into the slot. The company has directions. Work it around on a narrow end. Be careful and patient. I had to work it around for a while before the pads were fastened. The comfort is restored after that. There is a The top pad is easy to install. There is a We are very satisfied with the product and price.
👤I'm confused by the reviews. If you don't care about sound quality much, they're a good replacement. Why did they buy HD-280s? There is a I stopped giving them a thumbs up because they're not too much trouble to get on and they're comfortable like the originals. The sound quality is degraded because the internal foam is not as dense. I can hear more noise coming from outside. I'm looking for new headphones after I submit this review because the sound quality is so bad. The pleather feels cheaper and less durable, but we'll see how it holds up. Update- Another star was removed. I kept the new headphones in the mix because they're the same as the ones I bought. They may follow the dodo bird because of this foam replacement. The speaker surface is resting against my ears as the foam collapses. This is not a replacement foam. It's just a resemblance.
👤The headband padding on the old model of HD 280 Pros was very uncomfortable to wear for a few minutes and it was a decade ago. It was difficult to find the original part for this model, but this headband seemed to fit. It took a bit of effort and I'm not sure I lined the fastening completely, but it does fit and doesn't seem to slide around.
We are continuing to develop more professional ear pads. If there is an issue with your purchase, please contact them for replacements or refunds. Premium quality memory foam imported from Korea, not too soft to be loose, not too stiff to hurt your ears, is designed for adding more capability on noise-cancelling. Premium quality leather imported from Japan is soft and comfortable for your skin. The design is the same as the originals, please read the instructions before installation. It is strong and tough to keep your headphones alive. If you are not satisfied with their 2-year warranty, you can contact them for replacements or a refund.
👤I finally got the ear pad installed after fighting with the tiny tabs. The ear pad replacement product is not a problem with the QC25 design. The dimensions and thickness of the replacement part were exactly the same as the original one, as can be seen in my second picture. The original second ear pad was still comfortable, so I didn't replace it. If I need more spare parts for the ear pads, I would purchase this product again. May 2019.
👤The Bose original are no better in that regard than these. The trick is to apply pressure with your finger on the foam ring at the base of the ear pads at the point where the tab is on the inside of the plastic housing. Start working your way around. You won't do it right the first time. You will be angry. It will work perfectly when you get it. I've had to replace the earpads multiple times. The vinyl covering on the foam and cloth starts to break and black bits start to fall off. There is a I will revise the review if the price is less than Bose, and I will be interested in the durability. These things are disposable.
👤The cheapness makes them useless, even though they are similar to Bose ear pads. They don't lock into place because they don't have the raised bumps of the official ear pads. They're not as full as the official product, which is noticeable when you start listening. I wish I'd done more research to see that they were not real. Don't shell out for these, they're real.
👤I had no idea how easy it was to replace my bose ear pads after 5 years. I was overwhelmed with the choices on Amazon and decided to go for Aurivor. Couldn't justify paying $35 for an automobile. Even if these break down, I could replace them with an off brand. The pads aren't the same thickness as the originals, but that doesn't make them less comfortable. I'm very happy with my purchase of the QC25's and they feel good again. I hope the video review is helpful.
👤The ear pads have to be replaced. After a year of steady use, the Bose ear pads on my headphones started to rip open slowly. Such sadness. I looked into the Bose warranty but found it wasn't going to do much for torn ear pads, so if I wanted to try to submit a claim I'd have to send my headphones, which were still working despite the torn ear pads. I tried the replacement pads. I'm glad I did. The ring shaped holster on the headphones didn't fit perfectly with one of the ear pads. After a few weeks of steady usage, it hasn't come apart or caused any trouble, despite being attached like 85% of the way. Installation is not impossible, but it is a little annoying. There is a nice minimal packaging. Would recommend. Cheers and happy listening.
👤You get what you pay for. I've used Bose for a long time. I've had to change pads before. I went for the cheaper imitations and it was a disappointment. The inside mesh is smaller than the original. They don't sit well when you wear them. Not recommended.
8 pairs ear tips are included in the package. It is high quility,durable, and washable. 1 year warranty! Money-back guarantee for 30 days. To avoid pressure, contact the head.
👤I'm happy I found these. Replacing the headphones is much cheaper. I received four foam replacements in my package, enough for two headphones. It was a perfect replacement for the VES headphones that came with my car.
👤The headphones that come with the DVD player in the car were purchased. There is a The cushion between the speaker units and the wearer's ears is 4-5mm and is likely adequate for a few hours' use. Our kids will be able to watch movies on a drive in a few weeks. I will add information about comfort and durability after the trip. The speaker units are 75mm by 60mm. It would probably cover something small. The un stretched opening of the cover is 40mm and the outside dimensions are 75mm, but this also includes the thickness of the foam so the un stretched internal length is likely around 70mm. They fit snug on the device and are easy to place, but it's not easy to install the covers since they have to be installed. The precision of the measurements in the photos is excessive, but may be useful as the manufacturer size photos are inaccurate and few other foam covers here on Amazon actually provide information like this at all.
👤Over the years, the foam ear pads that cover the earphone part of the system have crumbled. I had trouble finding replacements that would work, but they were on Amazon. The pads are thin, but fit well. They did the job at a reasonable price. I bought an extra set since I am sure the new ones will follow the same path as the old ones. I will keep the spare pair in the climate controlled house until they are needed, so they don't suffer the fate of the old ones before their first use.
👤The wife discovered the headphones in a bag under the front seat of the vehicle. The ear pads were torn. We contacted the dealership, but they were not aware of any replacements. These are what was needed after an AMAZON search. We bought several so that we could have spare ear pads for all of the headphones. Highly recommend them.
👤The replacements were easy to install. They are in a zip bag. There are four pieces and two pairs. Shipping was fast. Got them a day early. I ordered another set because I was so happy. These are the same ones as the dealer, but two for the price of one from them. My set deteriorated. The old ones were destroyed and can't be 100% about because they were from the age and temperature. Would definitely recommend. One pair was a little more oblong.
👤I made some headphones that were black. The leather/vinyl ear pieces were old and had been in a hot car. Anything that touched black would turn your ears. The old ear pieces were more difficult to remove than the new ones. Went quickly and easily. I enjoy not having my ears dyed black and it wouldn't be an issue if masks covered them.
The package has a headband cover. The headband cover is compatible with most brand size headphones. Protect your headphones from dirt and sweat. A smooth surface and comfortable touch can be provided by high quality durable material. Excellent match, follows the shape perfectly. It's easy to install and use the durable zip closing. The package includes a headband cover for headphones.
👤I'm not sure if this is working or not. My new beats pros hurt my head, and I bought this to make them more comfortable to wear for long periods as I wear them sometimes for up to 12 hours a day between being online for work and school, and more often than not they still hurt. It doesn't feel like there's a lot of padding on this when it's on my head, so I'm still having some problems I have been taking to wearing a beanie or scarf instead of this on my beats. There are other ones that have more padding and will be more comfortable. If you have beats pros where you have to close them to turn them off this can be awkward.
👤I ran into a good sale price for a set of Rosewill ANC headphones. The cans have 40mm drives, a modular 3.5mm audio input, and can be switched on/off. There is a small loop in the middle of the protector that allows one to hang headphones on a hook. There is a The integrated headband cover on this set is one of those PU 'leather' shaped things that look nice, take little space when carried portable, but they press harder against your head than most of the wider flat-shaped bands. The headband is made of smooth PU leather. I was amazed by the quality of the headband protectors I received. The headband is well sewn together, stretchy to some extent, and the protectors are 1.5 inches wide in the padded area, so they stay on the headband securely. There is an anti-slip padding on the bottom of the protector. This part goes against you. It feels soft and prevents your headphones from twisting. There is a This cover enhances and improves my headphones. It seems to fit more headphones than the description suggests. The described item will fit well if the set comes with an 1.0" wide headband.
👤I had a pair of Koss headphones that I used to practice my guitar. I ended up with black particles in my hair every time I did this. I was looking for something to cover the headphones. There are a lot of these out there, but not for Koss. Most of the ones I found were too long. I decided to take a chance on them after finding them. These were correct, as Goldilocks would say. I really like them. They went on without a hitch, they feel nice, and I like the color. I'm only wearing these in the room where I play the guitar and they don't matter what color they are. I don't think they look bad. The Koss like these because they are longer on the underside and shorter on the top. They don't get in the way of folding or adjusting the headphones. I would recommend them to anyone. They are a good product at a good price. They solved my problem. You will not regret buying them.
👤I have headphones that are too big for my head and I wanted to add padding to them. This item doesn't have foam padding. It has a strip of thick fabric that only provides a small amount of padding. It seems like a nice product, but I bought it because I need actual padding, which this does not provide.
The headband pads are made of mesh fabric. Give your headset a new accessory. It should be a brand new look. Product dimensions are 6.14 x 0.86 inches. The package has a headphone headband cushion.
👤It works great on the headband. You can hold it in place with the help of a glue. The band is the right size. It doesn't seem odd with my pads. It looks like a lightweight headset. The ModMic is attached to the side. The parts express band fits me even though the cushion takes up a lot of space. Those with large heads may not be as lucky. I am a size 7.5. There is a Since I shave my head, the cushion is needed. Even when moving my head, the mic is still stable. I like this setup. I plan to buy an old headset and replace the plastic attachment mechanism for the headband. I'll cover it with leather.
👤It doesn't fit the G35 despite being the correct size and shape. Why? The back is not in the right position. There are two rows skewed to one side. That means that one side of the pad doesn't fix the headphones, causing them to pop out of place. Very, very dumb.
👤I've been using the G930 for at least a couple of years for everything from gaming to audio calls for work. The daily use of the product caused wear and tear, so I was glad to see I could extend the life of the product by replacing the battery and cushions. The headband that goes across the top of the head has a little more cushion than the original one. I learned how to install it. There are no instructions with the product. If you want to do a step-by-step, you can search for videos, but the bottom line is to pop one end of the old cushion out with a small screw driver. It's held in place by just a rim of hard plastic, so if you pull back on one end and get a small phillips under the plastic edge, you can peel it out. It's the opposite of installing. Put the two corners of one end into the slot, then tuck the remaining edges under the headphone slot until it pops in. I had a G930 that was as good as new for a few dollars, with this headband, a couple of new ear pads and a fresh battery.
👤It does its job. My old leather ones were replaced. The ear cups should be the same color.
👤It works for my G930. Don't listen to the support forum where they say it's impossible to replace it. You can slide out the old cushion with a flathead screwdriver if you pop out one of the retaining clips. Once the cushion is replaced, the clip pops back in. It seems like it is the same calibur as when it was new.
👤Installation took about 5 minutes and I took the old headband off. I think comfort is fine.
👤It was better than the original.
👤This one was easy to replace and looks great.
👤It wasn't the right size as it didn't fit. I'm not sure if they do in different sizes, or if they sent a wrong item.
The headband set is very similar to most Medium headphones. There is a lanyard loop on top of the headband. The headband can be easily installed and disassembled with the help of the Hook and loop design. The headband cover can still be used without a new headband if the headband pad is worn out. Skullcandy, Hesh2, Hesh3 and Hesh ANC are compatible with the headband cover. Product dimensions are 7.48 x 1.77 inches (19 x 4.5 cm). The package has a headband set.
👤Even though it doesn't fit my headphones, I tried to find another use for it. It's a great replacement for the thin sleeve that goes around the changing table. It's two pieces. It zips on. The sleeve and pillow part are covered in a type of pleather-vinyl hybrid that has some kind of Velcro on it. It doesn't smell and it keeps my son in place when I'm trying to change him. It does so without causing him distress when the table strap is tightened to fit. He calms down and lets me clean and change him better, instead of trying to get him back into anything, by taking something off, cleaning and hydrating him. I have to change the lens on my cellphone again because of the poor quality of the images. I'm going to buy a few more for his other items, like the Heao High Chair and his little rocking chair. The straps don't fit as well as they should because he's small at 20 lbs. He doesn't like the texture of the straps on him. This is an improvement. Thank you.
👤I thought my headset would fit. I agree. My head is too small and even with the headset set on the shortest length it still doesn't sit well on my head. I needed an extra padding piece to lift the headset up on my head so that it sat properly. I am so grateful for this product. It's easy to install and fix my problem without looking like I'm attaching something to my headset.
👤I don't fit my wireless headset the way I want it because of my small head. I used to have headaches after a couple hours but now wear my headset daily and have no problems. A new headset is much more expensive. It worked well and was true to size.
👤The headband is perfect for fixing the size of the Soundcore Q20. It's easy to install.
👤This is a great addition to the Hyperx Cloud Orbit S gaming headset and Audeze Mobius since they're nearly identical other than some technical features. The headset is great for gaming, but I found the headband very uncomfortable after a short time. Most headband covers don't offer much extra padding, but this one is so comfortable that I ordered more just in case they discontinued them or they don't last as long as you'd expect. If you have a big head and already have the headband expanded to the maximum or close to it, this might not work for you.
👤The comfort of the headphones went from being ok to being very comfortable. The headband was too big for me and even on their fully retracted setting they sat just below my ears. I initially tried another headband cover to give a slight lift, but then I tried the ones that were missing, and they gave me a slight lift, and also gave me some comfort, even though I wasn't aware they were missing. I thought I would need a longer cover. It's perfect. If you need to cover a worn out band or just add comfort to your headphones, I highly recommend this. If you want to add this to headbands that are 1.5 - 1.75 inches wide, you could use my band, which is roughly 1 inch wide.
There is a chasms comparison. Bose QuietComfort QC 2 / 15 / 25 / 35 / 35II /AE2 /AE2i / SoundTrue / SoundLink around- ear headphones. Easy installation. Simply move the old ear pads and install the new replacements, it's a perfect fit to give your headphones brand new. It is a very comfortable and high quality leather and elastic memory foam. The noise cancelling enhances the voice. Long lifespan and easy maintenance. They are designed to match the ear cups, so they won't fall off. If you're not satisfied, you can get a full refund. You can contact them at any time.
👤My dad was upgraded to the QC35's. After I used them for a year, my stubble abraided them until they gave up. These were a limited edition that came with colored pads. Bose calls it white. I wanted it to be close to the original but not full brown. The dust liners they came with were black and not blue, just as they originally came, so they were perfect. Installation took about 10 minutes per cushion and I wanted to make sure all the tabs on the cups were secure. The pads are the same depth as the original pads, no looseness or oversized fit, and a perfect fit. The leather is slightly more durable than the original, but I haven't worn them yet.
👤It was a good idea to try these out or buy a new pair of Bose since my pads were shot. They seem to be okay, but they have to use one ear pad. It doesn't want to stay for a long time. I put it in the case and it comes off. I'll keep trying. It's cheaper than buying a new pair of headphones.
👤Awesome product. The gold colored ear pads look great. It took a while to put them on because they might be bigger than they need to be. They still do the job. It looks great on my Bose.
👤If I could, it would be 0 stars. I got them two weeks ago and thought they needed time to stop. The original would fit my ears very well. This one is small and touches my ears from all sides. It's bad when noice cancels and you can hear everything around you. If you make a replacement, get the dimensions right and match the quality. I think I have just a waist of money. 35 is the original. I put them in the cart before reading the reviews. I will give it a try. I will save you from returns and reorder you. The original should be obtained first.
👤I own a Bose Quiet comfort for about 3 years and the earpieces clearly showed wear. What to do? Do you want to buy a new set of headphones? Replacing the cushions with genuine Bose parts? There is a Bose parts don't seem to offer any added value, so I went with this option. I am very happy with my choice. There is a The installation of the replacement was a bit frustrating, but the end result is very satisfactory. There is a I don't think anyone would be able to tell the difference between genuine parts and new headphones. I will buy the same model when I need to replace these cushions again.
👤It is not as comfortable as the genuine bose cushions, but you know that and you are fine saving a few bucks.
👤I only have 2 things to say about these headphones. 1. They look and feel like the original ear pads. The markings look the same. There are no regrets here. 2. The ear pads were installed as expected. It was awkward. I wasn't sure if they were clipped on completely. I had to redo it. That would have been the same regardless of what brand of ear pads I bought. I think it takes a minute to figure out how to clip them on completely. This is not a knock on Bose. Take your time and you will be happy.
The package has a headband set. It is high elasticity, durable and soft. Give your headphones a new lease on life. The package includes a headband.
👤This was bought for modifying my audio-technica m40x. I'm pretty sure I have the most comfortable set of m40x's ever. Cut this headband to fit, attach it with some strips of velcro, and they no longer bother me. If you have the m40x/m50x, I recommend doing this. It was easy, cheap, and satisfaction.
👤My old headphones made the top of my head uncomfortable. The band is short but the width is perfect. This seems to work well and makes it easier to install as there is more space on either side of the track to slide the band into without removing one of the ends. The padding is 1/2" thick.
👤The title says so. The Massdrop version of the 650's will be fixed. There is a It isn't comfortable. While I still have a big head of hair, I usually feel comfortable with it. These are not. They raise the headphones above your head so you don't feel like you're wearing a headband. They are not comfortable. I prefer my worn out stock headband cushion over the ones I wear. If Amazon didn't charge me $6 to replace them, I would return the product. It would cost me more than a dollar of gas to return it to them, so I decided to sell them at $7. There is a I give it 2/5 because of that.
👤I own the original HD600's and know what the headband feels like, so I bought these for another pair of headphones. There is a The form factor is barely the same as the original. There are 1. The headband was much larger. The pads have larger gaps. They will cover a smaller area of your head, concentrating the pressure point, instead of spreading it over a larger area. 2. The pads are stiff. Hard foam is being used instead of memory foam. I can't imagine these being comfortable after 15 minutes. 3. The price point is terrible. The cost is $9 with tax. I don't think they are worth much more than $5. 4. There was no glue. Maybe or maybe not. There is a There are 1 positives. The build quality seems decent. 2. There are male panels on either side of the piece. You could tape them around your headband. These are not HD 600 style headbands. Not in comfort, not in value, not in any shape or form.
👤I bought these for my friend. I was going to return it, but I realized I could affix it to the headband. It works well and feels sturdy on my head. I don't think there is a good alternative for the 280s other than the original headband or knitted looking one, so hope these last a few years. I saw some reviews that used strips of velcro for a cleaner look. I'm cheap and my wife has 100 hair ties.
👤The replacement part for the HD600 is awesome. After the foam broke down, my headband was completely flat. The replacement took about 2 minutes to install. The padding on this replacement part is very firm and will hold up. My original pads lasted about 6 years. The fit and finish on this replacement part was perfect, and did not require any adjustments.
The battery life is 22 hours. Make your SoundLink headphones great again. The old SoundLink ear pads are peeling and stinky. Don't let your headphones go to waste. You can get back into the music with a set of premium SoundLink ear pads. SoundLink Around-Ear 2 wireless headphones have ear cushions that are old. The SoundLink Around-Ear 2 ear pads are made of a soft, high density foam and smooth leather that conform to your ears and provide long- lasting comfort. Soundlink's headphones help silence the world and focus on those tunes. SoundLink pads are needed to revive the sound you love. The thicker rim of the headphones provides a more secure fit. Their seam stitching increases the longevity of your headphones. The SoundLink Around-Ear 2 headphones will be back in business with the new SoundLink AE2 ear cushions. Their video guide shows you how to install the replacement headphones. You can find the link on the product insert or watch it on the internet. The Soundlink Around-Ear 2 wireless headphones have 2 replacement ear pads and 2 scrims in them. Your headphones are going to be completely refreshed.
👤My daughter has been using the Bose headphones for a long time. She loves them because they give her the clearest sound of any headphones. I have replaced the heaphone cushion set many times. I was very happy to find this seller, still selling her old headphones. The set is like a glove. When the inevitable peeling and flaking starts in a few years, maybe I should order another set. The included tool makes it easy to remove the leftover glue. The speaker screens L and R are marked. The Bose headphones are brand new if you snap the cushions in place.
👤Game changing. I used my Soundlink A WIRELESS HP II B's for music and gym everyday after I bought them in November of last year. Movies, etc. I started researching to see if there was a replacement for the ear muffs that were out of stock, I found them on the Bose site, but they were out of stock. I came across these when I continued looking. Read the reviews before you make a decision. I was very happy that I did. It is very easy to install. Excellent quality. They will give you a tool to install the new ones. Either these have better noise cancellation than the original, or I forgot what that feels like. Don't hesitate to buy these. You'll thank yourself if it fits your headphones.
👤Many of these are made from junk. I was surprised. The video help shoes exactly how to install them seem to be of excellent quality. The Uspudger tool was used to remove the old ear seals. The part is held on grips with crazy glue. The ear seals are of the highest quality. They feel very well made and snap in just like the originals. There is a I ordered another set to make sure I don't have to replace them again.
👤I gave these to my friend who was complaining about his headphones. I don't use them, so I don't know about noise cancellation. I tried to find Bose, but couldn't. I took a chance on this product. There is a The video was easy to understand. It took about 5 minutes to change them. There is a My friend seems happy, but I am not sure if he even cares that this is an aftermarket product. The Bose original ones were in a sad state and this was a huge improvement.
👤My earpads were starting to break. I found these and decided to try them out after reading the reviews. They do fit, but you have to be patient and the video really helps to get them on securely. But once you slip the headphones on, wow! The soft ear pads are better than the original ones. We have to see how well they last now.
👤I've had my headphones for a long time. I needed to either buy new headphones or replace ear pads because the vinyl was worn-out. The delivery date was 2 months away. Decided to get black for a fee. The fit was perfect and it was delivered on time. Highly recommend them. Spending another $300.00 is better.
Headphone padding cushion products from Geekria. In this article about headphone padding cushion you can see why people choose the product. G Gvoears and Scr are also good brands to look for when you are finding headphone padding cushion.
Geekria, G Gvoears and Scr are some of the best brands that chosen by people for headphone padding cushion. Find the detail in this article. Aurivor, Zotech and Txesign are also brands that their products are worth to check.