Best Headphone Padding Headband Universal

Padding 1 Feb 2023 10+ Comments Open

1. Replacement Headband Sennheiser Headphones Cushion

Replacement Headband Sennheiser Headphones Cushion

The headband pads are made of leather. Give your headset a new accessory. It should be a brand new look. Product dimensions are 2.36 x 0.39 inches. The package has a headband cover.

Brand: Geekria

👤These do not work. For me, the suggestions others made did not work. The headband won't fit the stiff strip of the glue. It pulls away and won't stay with you. The pads look like the original and are comfortable. Too bad they don't work.

👤I have only had them a short time and can't comment on their longevity. The pads pull off in a short time because of the weak glue. I would recommend coating the surface with a thin coating of good epoxy.

👤These worked well for me. The backing material is heavy and the quality is good. They would get away from the headband at first. I had to bend the backing to match the curve of the headband. They look like factory cushions.

👤Take your time and work one end to the other, not all at once. My sennheisers have been added years.

👤The pad wouldn't stick to the headband and kept falling off.

👤My sennheiser phones have been with me for a long time. They needed a minor tuneup. I am very happy with the quality of these.

👤I bought these and found out they were not 3M glue as shown in the picture.

👤The pads are exactly like the original ones.

👤The quality is decent, the fit is perfect, and they are a lot better than my attempt to make replacements for my old headphones.

👤Replacement pads for the headphones. There is a 3M sticky tape was used to stick the pads to the headphones. It's worth buying!

👤It was easy to fit and I thought it would be difficult. It was not as good as the original sennheiser product.

👤It's easy to fit and looks like the original.

👤es glcklicherweise lange. Im Rezension ist das Kaufempfehlung fr Sennheiser. Weil die Hrkissen defekt waren, weil die Hrer entsorgen. Ich diesen nun in Genuss Jahre benutzen. BRAVO und KAUFEMPFEHLUNG.

2. Soundlink Universal Replacement Protector Headphones

Soundlink Universal Replacement Protector Headphones

The package contents are listed. A headband cushion. The alcohol pad is x2. The headband cover is compatible with most of the large-sized headphones. Protect your headphones from dirt and sweat. A smooth surface and comfortable touch can be provided by high quality durable material. Excellent match, follows the shape perfectly. It's easy to install and use the durable zip closing. The package includes a headband cover for headphones.

Brand: Txesign

👤After a few hours of use, the headband on the Virtuosos hurts the top of my head. Hopefully this will make up for the issue. If the pad didn't have the tag and hoop, and the zip was a little better quality, this would be a 5 star review.

👤I have only had this headband cover for a few days, but it works perfectly for my headphones. The 2 1/2 inch width is the largest one. It's comfortable and distributes weight more evenly than just the headband, which is why it fits Focal headphones like a glove. It's important for heavier headphones. It has grey and red accents that match my headphones. Time will tell if it holds up, but it definitely feels sturdy. I bought it to prevent the foam on the headband from degrading, because it feels more durable than the stock foam. You don't want to have to replace the headband after you wear it, so consider this.

👤This is for the Corsica Islands. I wear my Corsair Virtuosos for 3-4 hours a day, but 7 to 10 hours grand total isn't out of the question. I spend most of my day at my PC. While I have a lighter pair of open back Koss UR40s, I prefer my Virtuosos for their closed back feel and the convenience of being wireless. The caveat? I decided to get some aftermarket padded earcups and the 1-8/9" cushion pad after seeing some positive reviews, because the Virtuosos are very uncomfortable in their stock form. Now? I can wear my Virtuosos all day long, and they don't make me miserable. I think this investment is worth it.

👤I was looking for a cover to help my headphones because the leather material on the headband was peeling off. I didn't want to look like I had a big case of it. I wanted a cover that matched my cans' white/silver/gray color scheme, and I didn't want the knitted covers that looked like sweaters for the headphones. There isn't a lot of reviews for this headband cover yet, but I took a chance on it. It worked out great. It protects the parts I need. The materials look nice and match my headphones' colors. There is a The zip up felt cheap and had a hard time staying together when I tried it. The trick that worked for me was to use one hand to hold down the end of the zip up. There is a The Small size fits well for anyone who has a V-Moss CrossfadeLP. The cover is too small at first but you have to stretch it. Trust me, it works. It takes some skill to wrestle it on, but the cover works well.

👤I like that the cover fits perfectly on the band, but it doesn't give me enough resistance as the headphones slide off my head, and it doesn't have enough padding to raise my headphones high enough to fit on my head. I need to place a headband on the crown of my head to make sure my headphones sit high enough to cover my ears, but they don't stay on the crown of head. I was hoping that the cover would add padding to make headphones fit properly. The cover does what it is supposed to, but not what I wanted them to do. I would like to find a cover that has more padding on the head-fitting side. This product should do the job if you are looking for a cover for your headphones. I ordered the 1 1/2” W Cushion Pad for the headphones and the cover, which is on the underside of the band.

3. Replacement Headband Cushion Sennheiser Headphones

Replacement Headband Cushion Sennheiser Headphones

The package has a headband set. It is high elasticity, durable and soft. Give your headphones a new lease on life. The package includes a headband.

Brand: Sqrmekoko

👤This was bought for modifying my audio-technica m40x. I'm pretty sure I have the most comfortable set of m40x's ever. Cut this headband to fit, attach it with some strips of velcro, and they no longer bother me. If you have the m40x/m50x, I recommend doing this. It was easy, cheap, and satisfaction.

👤My old headphones made the top of my head uncomfortable. The band is short but the width is perfect. This seems to work well and makes it easier to install as there is more space on either side of the track to slide the band into without removing one of the ends. The padding is 1/2" thick.

👤The title says so. The Massdrop version of the 650's will be fixed. There is a It isn't comfortable. While I still have a big head of hair, I usually feel comfortable with it. These are not. They raise the headphones above your head so you don't feel like you're wearing a headband. They are not comfortable. I prefer my worn out stock headband cushion over the ones I wear. If Amazon didn't charge me $6 to replace them, I would return the product. It would cost me more than a dollar of gas to return it to them, so I decided to sell them at $7. There is a I give it 2/5 because of that.

👤I own the original HD600's and know what the headband feels like, so I bought these for another pair of headphones. There is a The form factor is barely the same as the original. There are 1. The headband was much larger. The pads have larger gaps. They will cover a smaller area of your head, concentrating the pressure point, instead of spreading it over a larger area. 2. The pads are stiff. Hard foam is being used instead of memory foam. I can't imagine these being comfortable after 15 minutes. 3. The price point is terrible. The cost is $9 with tax. I don't think they are worth much more than $5. 4. There was no glue. Maybe or maybe not. There is a There are 1 positives. The build quality seems decent. 2. There are male panels on either side of the piece. You could tape them around your headband. These are not HD 600 style headbands. Not in comfort, not in value, not in any shape or form.

👤I bought these for my friend. I was going to return it, but I realized I could affix it to the headband. It works well and feels sturdy on my head. I don't think there is a good alternative for the 280s other than the original headband or knitted looking one, so hope these last a few years. I saw some reviews that used strips of velcro for a cleaner look. I'm cheap and my wife has 100 hair ties.

👤The replacement part for the HD600 is awesome. After the foam broke down, my headband was completely flat. The replacement took about 2 minutes to install. The padding on this replacement part is very firm and will hold up. My original pads lasted about 6 years. The fit and finish on this replacement part was perfect, and did not require any adjustments.

4. Replacement Headphone Headband Protector Installation

Replacement Headphone Headband Protector Installation

The package has a headband cover. It's quite comparable. Most big-sized headphones are compatible with the GEVO Headphone Headband Cover. HyperX-(Cloud 2/Cloud Alpha/Cloud II Wireless/Cloud Core/Cloud ALPHAS) The Shure-(SRH450/SRH450DJ/750DJ/) Corsair-(HS50/HS60/HS70),Logitech-(G PRO X),Corsair Gaming H2100 headset are listed. A very flexible headband cushion can be easily installed. Allow you to reuse. Quality materials and design, made of high-quality Knitted Fabric, improved and effectively protect your earphones from scratches. This is a note. Earphones with a narrow headband are not recommended because they will be loose after installation. The pack contains 1 x Headphone headband cover and 2 x Alcohol pad. The protectors cushion pad is 10x 4.3 inches. The headband cover can wrap the headphones.

Brand: G Gvoears

👤Even if it is thin, the headphone cover is made of nice material. When I tilt my head, this material keeps my headphones from sliding. It makes them easier to wear while I clean the house. Two years ago, I bought a cover on Amazon that moved my headphones all over and made them fall off. There is a This is the longest cover I've found. I can't find anything anymore. The seller will sell a cover that protects the joints where earphones twist. When I lay down to watch tv, those dig into my head.

👤It seems that high quality materials and high quality execution are very durable, but only time can tell. It is almost good enough for the Focal Clear but not quite there, but it is the closest that I could find. Highly recommended.

👤The leather of my headphones was peeling off. The cover keeps my head clean. It's in place. It doesn't conform to the headband exactly and sticks out a little, but it would give 5 stars.

👤Works well with PSB. M4U 1. I had to stretch it a bit but it was not unreasonable. Will probably buy another one.

👤The length was shorter than expected.

5. Headband Replacement Protector Installation Headphones

Headband Replacement Protector Installation Headphones

It is comparable. Only the JARMOR headband is compatible with the Kraken V2 and the Kraken Pro V2 headphones. Not compatible with the Kraken V1! Easy installation. It's easy to install and use. Protect your headband from dirt and sweat. The high quality material is made of soft neoprene. The replacement headband has a smooth surface. Each head band is thoroughly inspected for defects. Money back guarantee for 180 days.

Brand: Jarmor

👤This is a great way to protect the headband of the headphones. I wish I had known about this product before it happened to my headband. I believe that if this was wrapped around the headband from the beginning, it would prevent it from peeling. Oh well. This cover restores the look of my headphones. There is a The headband cover is comfortable. I prefer a snug headband over a baggy one. I think my purchase will last for a long time.

👤I use a Sony noise cancelling headset a lot. The band across the top is narrow and not comfortable to me. I can wear the headband cover for longer because it helps to cushion and widen the band. Quality and price are both good. I recommend it.

👤If the headband padding is falling apart, this will help replace it with a generic cover. It doesn't have any padding. Adding your own foam is required for additional comfort. Will help extend the life of old headsets.

👤My daughter borrowed my headphones and they peeled! The cover stops the plastic from getting rid of the outer layer. It helps to find the headphones with a green color. Would buy again.

👤After the headband padding started cracking, I kept my headset alive. It is more comfortable now than it was before.

👤I tried to install it but it broke. It looked like it was used as well as the packaging. The color was very faded and looked like it was sitting in the sun for a while. I do not recommend.

👤The pictures are very misleading and this should cost 3 dollars.

👤It's too expensive for a piece of spandex-like fabric. It was bulging on the curve. The crease on the center is what the seller folded it into.

👤It was great to be able to buy replacement cups.

6. Geekria Headband Replacement Sennheiser Headphones

Geekria Headband Replacement Sennheiser Headphones

The headband pads are made of velour. Give your headset a new accessory. It should be a brand new look. Product dimensions are 5.5 x 1.45 inches (14 x 3.7 cm). The package has a headband cover.

Brand: Geekria

👤The old and flat foam pad on my 558s was replaced with this. There is a The pros are 1. It feels brand new because of the comfortable foam. There is a Neutral 1. The fit is mostly right according to the other reviewer. It's not a big deal. There is a Cons 1. The sticky side of mine is not very good. As soon as I open the headphones to put them on my head, there is a gap between the sticky side and the headphone itself. There is a I only removed a star because it's not the biggest deal. I bought this along with a set of official pads from Sennheiser and my 558s feel brand new again. I would like the sticky side of this to be more sticky. I recommend it if you don't. * January 2021 has been updated. The sticky side has become a bigger and bigger problem for me. When I open the headphones to put them on, the pad falls off. When the gap exists, hair and dust get in there over a period of time, and it eventually kills the sticky, so I plan on buying a new set and hoping it goes better. I'm investigating ways to fix it, but I don't feel like the sticky side of it will last long before the padded side does. Decreased from 4 stars to 3 stars. I saw some reviews that said the problem with the glue was fixed and they started using a stronger glue. I bought another one and tried it out, since the one I had was terrible. I could tell there was a difference between this one and the one I bought a year ago by peeling off the 3m tape. It seems to stick better. I usually clean the headband with cotton balls and rubbing alcohol, and then put it on. It still shows a small gap, but it's not as big as before. I am going to use rubber bands and not touch it for a few days to make sure I don't have any problems. Hopefully this one does better. There is a It's a success if you don't see any future updates from me. 3 stars back to 2 stars.

👤You need to center it on a curved surface because the pad is small and there's a gap on the ends. Installation is difficult because of this. The glue is not great. If you open the headphones to put them on, the pad will get stuck in the middle. Once the headphones are in a steady state, it goes back to normal. I couldn't find an original pad from Sennheiser, I only saw the headband with wires and it seems excessive. I put the pad in a roll to curve it. I put it in the headphones. I used a duct tape role and heavy objects to try to keep the pad sealed for a few days. It has a gap when you open them up to put on the pads that the original one does not have. It does function, but don't expect it to be perfect. The glue is useless now. Every single use it falls off. I'm going to use my own tape to fix it.

7. Replacement MDR XB950BT MDR XB650BT Headphones Installation

Replacement MDR XB950BT MDR XB650BT Headphones Installation

There was no tool needed. Zip up in place if you want to fit over the original headband. Don't remove the headband. Can be used to protect your headband. This product is compatible with Sony. Product dimensions are 5.11 x 3.1 inches (13 x 8 cm). There is a headband x 1 in the package.

Brand: Geekria

👤This is a perfect fit and you won't notice. It leaves black marks on the headband areas when the headphones are folded in the case. The marks are permanent and cannot be removed without damaging the finish. It's unbelievable that they would release this as a protection.

👤I gave a rating based on the comfort and durability. The zip is not broken. But not the best. It's a good product and does what it was intended to do. If your head band is peeling or coming off, it's an inexpensive alternative. I bought it for a pair of Sony whch700n's. I wanted to add more padding to fit my head better. It didn't do what I wanted, but that's what it is. It's a good replacement for when I need it. It has a loose fit and is a tad bigger for my model.

👤It works perfectly for my Sony XM4's. They seem to fall too low, but this extra padding is what I need. I keep it on all the time.

👤It fits my Xm4 nicely, and when combined with the earpad sweat covers it protects my headphones from any sweat damage during my workouts.

👤It's like a pair of gloves. It was nice to protect that piece of syn leather.

👤It barely fits my headphones. It's hard to zip in a tight fit.

👤My old headphones look better now. It is a bit bigger.

👤I would have expected this to be better, for example, the model of my Sony headphones. There is a It is baggy, moves around, and not great to be honest. Maybe will go back for a refund.

👤I was very pleased with this gizmo, and I don't often write reviews. There was no easy way to fix the tear in the headband padding and the foam was falling out. This was a perfect fit and saved me from using tape or glue.

👤I noticed the dimensions and took a chance, the cover fits my AKG 550 perfectly, it could have been made for them. Very happy with the product.

👤They made the headband too thick to fit into the zip head, so I tried to put the headband on the headphones. The zip pull came off in my hands. A mistake!

8. Headband Protector Installation Sennheíser Headphones

Headband Protector Installation Sennhe%C3%ADser Headphones

The headband set is very similar to most Medium headphones. There is a lanyard loop on top of the headband. The headband can be easily installed and disassembled with the help of the Hook and loop design. The headband cover can still be used without a new headband if the headband pad is worn out. Skullcandy, Hesh2, Hesh3 and Hesh ANC are compatible with the headband cover. Product dimensions are 7.48 x 1.77 inches (19 x 4.5 cm). The package has a headband set.

Brand: Geekria

👤Even though it doesn't fit my headphones, I tried to find another use for it. It's a great replacement for the thin sleeve that goes around the changing table. It's two pieces. It zips on. The sleeve and pillow part are covered in a type of pleather-vinyl hybrid that has some kind of Velcro on it. It doesn't smell and it keeps my son in place when I'm trying to change him. It does so without causing him distress when the table strap is tightened to fit. He calms down and lets me clean and change him better, instead of trying to get him back into anything, by taking something off, cleaning and hydrating him. I have to change the lens on my cellphone again because of the poor quality of the images. I'm going to buy a few more for his other items, like the Heao High Chair and his little rocking chair. The straps don't fit as well as they should because he's small at 20 lbs. He doesn't like the texture of the straps on him. This is an improvement. Thank you.

👤I thought my headset would fit. I agree. My head is too small and even with the headset set on the shortest length it still doesn't sit well on my head. I needed an extra padding piece to lift the headset up on my head so that it sat properly. I am so grateful for this product. It's easy to install and fix my problem without looking like I'm attaching something to my headset.

👤I don't fit my wireless headset the way I want it because of my small head. I used to have headaches after a couple hours but now wear my headset daily and have no problems. A new headset is much more expensive. It worked well and was true to size.

👤The headband is perfect for fixing the size of the Soundcore Q20. It's easy to install.

👤This is a great addition to the Hyperx Cloud Orbit S gaming headset and Audeze Mobius since they're nearly identical other than some technical features. The headset is great for gaming, but I found the headband very uncomfortable after a short time. Most headband covers don't offer much extra padding, but this one is so comfortable that I ordered more just in case they discontinued them or they don't last as long as you'd expect. If you have a big head and already have the headband expanded to the maximum or close to it, this might not work for you.

👤The comfort of the headphones went from being ok to being very comfortable. The headband was too big for me and even on their fully retracted setting they sat just below my ears. I initially tried another headband cover to give a slight lift, but then I tried the ones that were missing, and they gave me a slight lift, and also gave me some comfort, even though I wasn't aware they were missing. I thought I would need a longer cover. It's perfect. If you need to cover a worn out band or just add comfort to your headphones, I highly recommend this. If you want to add this to headbands that are 1.5 - 1.75 inches wide, you could use my band, which is roughly 1 inch wide.

9. Replacement MDR ZX330BT Headphones Krone Kalpasmos Thicker

Replacement MDR ZX330BT Headphones Krone Kalpasmos Thicker

The warranty is for one year. 30 days of free return. The earphone covers for headphones have been carefully selected and cooperated with material suppliers of world- renowned brand headphones. It also improves the comfort of the earpads. You don't need to spend a lot more money to get a new headset. The ear covers need to be replaced with headphones. Bring your headphones back with you. The sewing is crack resistant and tightly close to fit the headphones. It was designed to fit the ear shape. Ear cushions can be restored to ensure the sound quality of the original headphones. They control the production process to make sure that the ear pads are of good quality. It is compatible with 70mm round on- ear headphones, but not limited to: Sony replacement ear pads. On-Ear; Mpow H7; Yamaha RH5MA; Grado SR125; etc.

Brand: Krone Kalpasmos

👤So happy these are available. They don't come with directions, so I found some online. It was easy to remove them because of the fear of damaging the headphones. They popped off without much effort. I was able to get the first replacement pad to click onto the phones without any issues, but the second was less cooperative. I got it on. It fell off when I knocked it off of my nightstand. It took my husband a while to get it to stay. It's solid now. They have the same sound quality. There is a I think I got one that was a little off. I still recommend them.

👤The ear pads on my Sony headphones wore out quickly. Someone told me that I could replace the pads on the Bose headphones that I bought. I found them on Amazon, but didn't know if they would fit or not, as I had no idea what the manufacturer was for the headphones I had. I took a chance on these and they fit. I don't have to worry about taking the expensive ones when I travel because I can take these. Win!

👤They are made of a soft leather-like material and are very comfortable and similar to the original ear pads. There is a The fit was perfect. Expect the same or slightly better noise reduction with the original ear pads. There is a When the original pads start to wear off, they are a perfect replacement.

👤They were a perfect replacement for my shredded pads on my old Sony headphones because they took a slow boat from China to get here.

👤Esto no fue lo, no le thatdaron a mi equipo, no tienen negro, no tienen aquelles, no pide. No, no, no.

👤My son-in-law uses his Sony headphones all the time for conference calls, so I surprised him with these. He was blown away by how similar to the originals these are that I installed them in 4 minutes. ARILLIANT is a word.

👤I had to return them since they were actually 2.5. They come in a nice baggie, but they don't fit my headphones, so I am sending them back and filing for a refund. Which was granted by Amazon.

👤The replacements were a perfect fit for my headphones. The results are satisfactory despite the fact that it took a bit of doing to install them.






10. Geekria Headband Logitech Headphones Replacement

Geekria Headband Logitech Headphones Replacement

The headband pads are made of mesh fabric. Give your headset a new accessory. It should be a brand new look. Product dimensions are 6.14 x 0.86 inches. The package has a headphone headband cushion.

Brand: Geekria

👤It works great on the headband. You can hold it in place with the help of a glue. The band is the right size. It doesn't seem odd with my pads. It looks like a lightweight headset. The ModMic is attached to the side. The parts express band fits me even though the cushion takes up a lot of space. Those with large heads may not be as lucky. I am a size 7.5. There is a Since I shave my head, the cushion is needed. Even when moving my head, the mic is still stable. I like this setup. I plan to buy an old headset and replace the plastic attachment mechanism for the headband. I'll cover it with leather.

👤It doesn't fit the G35 despite being the correct size and shape. Why? The back is not in the right position. There are two rows skewed to one side. That means that one side of the pad doesn't fix the headphones, causing them to pop out of place. Very, very dumb.

👤I've been using the G930 for at least a couple of years for everything from gaming to audio calls for work. The daily use of the product caused wear and tear, so I was glad to see I could extend the life of the product by replacing the battery and cushions. The headband that goes across the top of the head has a little more cushion than the original one. I learned how to install it. There are no instructions with the product. If you want to do a step-by-step, you can search for videos, but the bottom line is to pop one end of the old cushion out with a small screw driver. It's held in place by just a rim of hard plastic, so if you pull back on one end and get a small phillips under the plastic edge, you can peel it out. It's the opposite of installing. Put the two corners of one end into the slot, then tuck the remaining edges under the headphone slot until it pops in. I had a G930 that was as good as new for a few dollars, with this headband, a couple of new ear pads and a fresh battery.

👤It does its job. My old leather ones were replaced. The ear cups should be the same color.

👤It works for my G930. Don't listen to the support forum where they say it's impossible to replace it. You can slide out the old cushion with a flathead screwdriver if you pop out one of the retaining clips. Once the cushion is replaced, the clip pops back in. It seems like it is the same calibur as when it was new.

👤Installation took about 5 minutes and I took the old headband off. I think comfort is fine.

👤It was better than the original.

👤This one was easy to replace and looks great.

👤It wasn't the right size as it didn't fit. I'm not sure if they do in different sizes, or if they sent a wrong item.

11. Linkidea Compatible Headphones Replacement Installation

Linkidea Compatible Headphones Replacement Installation

There was no tool needed. Don't remove the headband. Can be used to protect your headband. The dimensions are 7.6" x 4.3" The package has a headband cover.

Brand: Linkidea

👤I bought these to cover the top headband of my audio technica headphones, that was made of cloth, and they started to chip. I wasn't sure if it would make me uncomfortable, but I was surprised it didn't change the comfortableness of my headphones. I think it was worth the money to make my headphones look better.

👤These are comfortable and will protect your headband from damage. Wrap it around and zip it up, it was easy to install. The giant seams on the back are the only thing that could be changed. It would have been better if the zippers were not visible. An excellent product. These will make the headphones tighter around your head.

👤It was used on Audio Tehcnica. Zip up the head band was a tight fit. It looks decent once done. It's not touching your head if you have the zipper face up.

👤It isn't a great fit and took a little work to get on, but it stays in place. I don't feel it when the headphones are on. It was an improvement over the original pad lining. Would recommend this.

👤Not a good fit for audiotechnica. There are ripples. I really don't mind. Otherwise, it works well. It stays put, it is comfortable on your head, and it covers up the peeling pleather, all that matters.

👤Thanks for helping me with this! The headband on my phones was peeling off. There is a I got the replacement cover that I needed and the phones are ready to roll again. TY Team Amazon!

👤They got stained after they got an oily head. No luck trying to wash them. Should have ordered a dark headband.

👤A good product for a good price. I removed the headband completely because it started peeling. The gray color is very close to the ear pads. The only thing I don't like about it is that it folds, but I may be able to reduce that by applying a heat gun.


What is the best product for headphone padding headband universal?

Headphone padding headband universal products from Geekria. In this article about headphone padding headband universal you can see why people choose the product. Txesign and Sqrmekoko are also good brands to look for when you are finding headphone padding headband universal.

What are the best brands for headphone padding headband universal?

Geekria, Txesign and Sqrmekoko are some of the best brands that chosen by people for headphone padding headband universal. Find the detail in this article. G Gvoears, Jarmor and Geekria are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to