Best Headphone Plug Extraction Tool for Ipad

Tool 6 Dec 2022 10+ Comments Open

1. Headphone Plug Extraction Tool Different

Headphone Plug Extraction Tool Different

Also, note: If you make sure the gripstick is in all the way, it should be fine. If the headphone plug was broken off in the device, it may not be possible to remove it without the device being disassembled. If the plug is broken off and you take out the broken piece, the headphone jack may still be damaged. The product position is. The kit includes a laser cutting mini steel pipe. These tubes have different thicknesses, slit and cutting angles which can be used for a variety of repair situations. All models of mobile phones, pads and computers have a 3.5mm jack. You can use this tool to remove the broken headphone plug in 30 seconds. You can save 3 hours on a trip to a professional repair store with this tool. Taking care of your money is important. 20 bucks will be saved. First use the short one. It should be inserted into the jack. Press the tube against the table when placing the phone or pad upright. You should put a book under the table. To feel the tool grab the broken plug, gently downward. Pull out the end of the tube with your hands or pliers. If the broken plug is not taken out, you should use the long one jack removal. The same method is used. The set of headphones removal tools is guaranteed. They offer a 100% satisfaction guarantee. If you don't like the tool kit, please take a picture and contact them. You will get a full refund. The small gift is a mini screwdriver and is a gift for your support of my small business. It includes a mini screwdriver, mini screwdriver, mini screwdriver, mini screwdriver, mini screwdriver, mini screwdriver, mini screwdriver, mini screwdriver, mini screwdriver, mini screwdriver, mini screwdriver, mini screwdriver, mini screwdriver, mini screwdriver, mini screwdriver, mini screwdriver, mini screwdriver, mini screwdriver, mini It can be used to disassemble glasses and watches. Hope you enjoy it!

Brand: Koara

👤The iPad's port has a headphone jack. I was hoping that there was a way to shimmy into the port. Don't believe the video. Pushing the tube against a book is not enough. I tried to hit the short tube with a screwdriver. The edges of the short tube were warped. The last chance was with the longer tube. I took a hammer to the tube because of the resistance I was met with. The pressure I tried to apply was heavier than tapping, but lighter than driving nails in. I think I would have damaged my iPad. I used pliers to remove the jammed tube. The plug was stuck. The tube was crushed because it wasn't deep enough. I have a problem with my iPad and am $10 down to fix it. I was gambling on a project that looked too easy. Maybe you can save money by learning from my experience.

👤I had been trying to get my son's broken plug out of his laptop jack for a month. I tried everything before I found this tool. It took 10 seconds to remove the plug after it was received. It's easy and effective.

👤My daughter's iPad had a broken headphone plug. I contacted a few local shops and they charged me between $80 and $200 to have it removed. I didn't want to pay a high price for a small item. I found a few solutions, such as using a heated paperclip, using super glue, and so on. I didn't want the internal components of the iPad to be damaged. I was skeptical but it was worth the $10 price. I had to try and get the broken plug out. The product is thin and flimsy, but it is necessary for it to slip between the earphone plug and the actual plug. I am very happy with this purchase. It saved me money.

👤The jack on my headphones broke. I tried many different things to remove the jack, but nothing worked. I bought the tool because I knew it wouldn't work, but I gave it a try because some reviewers had been successful. I bought a small hammer after reading that a small hammer has enough weight to push the tube in deep enough without damaging it. I tried hammering in the short tube first, but couldn't get a good grip to grab onto the jack to pull it out. I decided to use small pliers to pull it out after trying it several times. I had a hard time removing the top portion of the tube, even with the pliers. The jack was still stuck inside my phone when I pulled out the tube. I gently hammered the long tube in. I was determined to use my fingers to pull the second tube so I wouldn't crush it. I pulled out a small piece of the jack after it broke off inside the tube. I was able to pull out a second piece of the jack after repeating the process a few more times. I tried several times to remove the piece of the jack that was stuck inside. The largest piece of the jack with the skinny top is what was left inside, if you look at the attached picture. I tried pulling it all the way out, but I couldn't. It took a few tries, but eventually I was able to get a good grip with the tweezers. It is necessary for patience, repetition, gentleness, and ingenuity to make this tool work.

2. Kenddeel Headphone Extraction Remove Devices

Kenddeel Headphone Extraction Remove Devices

The package is incompatible with iPad Pro cases. You get:1 x Dockteck USB C hub for iPad Pro, 24 months worry-free warranty and lifetime technical support, as well as friendly customer service. All models of mobile phones, pads and computers are built to easily remove broken 3.5mm headphone plugs from jacks. The steel tube should be between the broken plug and the headphone jack. To feel the tool grab the broken plug, gently downward. Pull the steel tube out with your hands or pliers. If the broken plug isn't taken out, you should use another one. Please read the instructions carefully before using this tool. The earphone plug needs to be plugged in deep enough because of the small gap between it and the earphone hole. A single-use tool is a set of headphones jack removal tools. If you have a question, please email them. The type of connection is auxiliary.

Brand: Kenddeel

👤The package had a total of 6 sheet metal sleeves, a small bore brush, and two cotton finger cots, but they were not used. There is a The first time I tried to remove the plug, I pushed the sleeve in by hand, but it came out without the plug. The second time I tried to tap the sleeve with my pliers, I was careful to hold the port as close to it as possible. I think these work well. There is a The profit margin for the supplier is very high but I tried a few other methods and was not successful. I was going to try a couple other methods, one of which was to put a bit of superglue gel into a coffee stirrer and hope for the best. I have a working audio jack, a spare 998 coffee stirrers, and 4 STAINLESS steel sleeves. Maybe I can sell them on Amazon. There is a This method worked well for me.

👤I bought an iPad off of eBay, but I couldn't get it to play sound. It was stuck in headphones. I noticed that there was something in the jack. I sent a message to the company that I purchased it from, and they sent me a link to the kit on eBay. I found this kit on Amazon, which is cheaper and better. The first attempt did not achieve what I was hoping for, but it did bring out the culprit of the broken plug. The broken off plug was easily brought out by my second attempt. I used a small hammer to apply more force, but it didn't move inside anymore. I pulled it out with some tools.

👤It was received in one day. My daughter has a Honda Accord. The tip broke. I used a pair of pliers to squeeze the tool lightly after I inserted it into the hack. It worked after being pulled straight out. I'm happy with the results. Everything works again after I cleaned the receptacle with the included cleaning tool. I am happy I bought this. It is a great price. This method is not destructive and can be used on computers, phones, and anything with a 3.5 stereo receptacle.

👤I tried the "super glue on the qtip" method first, after breaking off the tip of my headphones plug, because I was going to try the "super glue on the qtip" method. I squeezed it with some pliers after I didn't push hard enough to get past the retaining clip inside the jack. Voila! The broken tip saved me the trouble of buying another board. Oh wow! A crisis was averted.

👤It worked! There is a My granddaughter lost her sound when she broke her headphones. It would have cost a lot if I had not seen the ad. I tried it for the first time. The jewelry plier was used to pull it out. It was perfect! Thank you so much! I can hear my IPad.

👤I took my son's iPad to the Apple Store and then took it to a local repair shop. Jack was stuck on his iPad. The kit has 5 pieces that can be used one time. I was able to get it out on the fifth try, but I wasn't able to get it out the first 4 times. I used a pliers and pinched it as close to the device as possible, instead of pulling it out with my hand, because it was too delicate. This is what helped the jack to slide out with the tool. This saved us from having to spend hundreds to replace the iPad that Apple said was my only option. I am very pleased with this product.

3. Apple Lightning Headphone Jack Adapter

Apple Lightning Headphone Jack Adapter

The 3.5mm audio plug is used to connect devices to your Lightning devices. It works with all devices that have a Lightning connection, including iPod touch, iPad, and the iPhone.

Brand: Apple

👤This was ordered from Amazon. My phone doesn't work with the 7+ version of the iPhone. The apple product pictured on Amazon has two cylinders with flat transitions from the rubber to the plastic/metal 3.5 receiving end and has flat transitions on the lightning side as well. The product I rec'd has a rounded transition from the wire to the plug. I'm a little disappointed that Amazon would sell this, which appears to be a faulty product based on my first shipment, directly to consumers. I expect this when buying from third party sellers, but not from Amazon. I am exchanging this in the hopes that they will fix this since I haven't had any problems with their generic items before. The exchange product from Amazon appears to be the same as the original apple product and works with the iPhone 7+. If the product fails, will update.

👤These are used Apple lightening adaptors that are being sold as new for the same price as the Apple Store. You should just get a new one from Apple.

👤This accessory is not supported by the phone. After a minute of play time, it stopped saying that my Bose Quiet Comfort 2 and the other headphones were not compatible with my phone. I tried the same thing with the original iPhone accessory that came with my phone. Don't buy them.

👤I almost didn't buy it because of the reviews. I had bought a pair of knock-off brands and had some issues with them, but I bought 2 orders of this item and they are definitely Apple brand. They are the same as the ones that came with my phone. I miss the auxiliary jack, but it is what it is and I had my fit when Apple took it away with the iPhone 7. I need these little extras. At least this one works. Amazon will accept returns on faulty items. I returned the knock-off brand ones that didn't work right. No hassle.

👤Wow... I keep things safe. The edge connecting to the phone broke when the phone fell down while listening to music. I was lucky to get out of my phone. The money was wasted.

👤I didn't work on the phone. They told me it was for an earlier version after I bought it. I wouldn't accept the new updates. They wouldn't take it back because it was past 30 days. I missed the return date because I didn't try the production as soon as I ordered it. It was very disappointing. They were no help when I reached out to them.

👤Several people say that this item isn't the real thing because of Amazon's habit of grouping different things together. The official Apple gear I received was in apple branded packaging and materials. It is the real deal. I thought I'd write this one to help people who were worried about the reviews.

👤The one that came with my phone, but doesn't work, arrived in a sealed box.

👤My company gave me an iPad for business use, the only reason I'm here. There is a This is a Genuine Apple product, from the people who make decisions such as leaving out the headphone sockets so that they can sell billions and billions of dollars of wireless ear buds. The gaming headset with boom mic is one of the headsets that can be supported by this adapter. Your opinion may vary, but wired gaming headsets have advantages. There is a The cable joining the two sides is not very strong and is unlikely to last more than a few months. It's a poor concept and poorly executed. It was almost designed to fail, steering you towards the ear buds. A large money making scheme. I'd be reluctant to trust this flimsy adapter, so one almost needs to have several spare parts on hand. It's an added hassle for people with noise cancelling headphones. The low price of this item and the time and effort of making a claim make me confident that the 1-year warranty is useless. It would be worse than a minimum wage exercise. That doesn't solve anything. There is a I've already sleeved one in three layers of heat shrink tubing to make it non-flimsy, after I bought two to start. It's now too rigid for portable use, so it's only suitable for working from home business calls. I'll probably end up with a wall mounted Pez dispensers. I'll bring a dozen if I travel. Imagine being at the start of a flight and your headset has failed. There is a nightmare. There is a I'll just travel with my personal phone which has a normal earphone.

4. Molex 11 03 0044 Connector Accessories Extraction

Molex 11 03 0044 Connector Accessories Extraction

The package contains a cleaning brush for the headphones. The package weight is :0.017 lbs. The package is 10.16 cm high. The package is 0.254 cm in length. The package width is : 7.62 cm.

Brand: Molex

👤The metal used to make the pushing-contacts is either not the same grade of steel or not treated to retain its rigidity, which is what I have an older version of. The contacts were bent when I removed the package, likely caused by the tool being shipped in a bubble wrap envelope. I was able to fix them without a lot of work, but the material quality was not the same as the original. The old-style ones would be more elastic. I haven't pushed many pins yet, but it appears to work. I wish the name brand tool was better quality than the cheap aftermarket ones.

👤I promise you that this review isn't reactionary or fanciful. I did not use this tool after sleeving my power supply cables. This tool is the most worthless tool I have ever purchased. At its job, it is horrible. I never got it to work. I think the metal that is inserted into the connector is either too thick or short. The removal of the pins requires more force than is required when using a stapler. I knew of the staple trick before I bought it, but I thought it would make it easier to maintain the pins. Not true. The staple trick works. It works, but it works well. It may take longer than it would if you had a proper tool, but I think that it is difficult to make a proper tool in this case. That is what the review comes down to. This is a tool that is very poor in design. There is a The only way to improve this tool would be to make the tip thinner. The problem is the nature of the connection. The tool is trying to do a job that is easier. There is a If I were to design a tool for the same job, I would make it a metal bar, but I would have a screw and partial indent for a staple on both sides. The user loosens the screws, drops a straightened staple into the indents and under the screws, and tightens the screws so they stay in place. The current design is bound to break, so my proposal would eliminate that problem.

👤The first time I used the tool, I was able to remove all 30 pins from the three Molex connections without damaging the tool. I removed one of the corner pins from the translucent body of the connector to see when the tool was inserted from the pin side. After some practice, I moved on to opaque connections. I think you should hold the connector. The rows are horizontal, then the tool is inserted from the contact side, and the pins are between the pin and the body on the left and right sides. It is easy for one of the prongs to enter the contact space if the pin doesn't release. If you pull out the tool and re-insert it, you can see that the prongs are where they should be. Push the tool as far as it can go into the connector to help push the wire back into the body. The pin and wire should pull away from the connector with light to moderate force if you feel the pin release in about the last millimeter of travel. If it doesn't, place one of the long edges of the body against the edge of the bench, make sure the tool is fully inserted, and try pulling the wire slightly toward the top and bottom of the connector. If the pin is caught on a metal edge, this will free it. There is a There is no need to use a lot of force if the tool is necessary to start over. It is possible to break the tool or jam the pins.

5. GripperX Headphone Extraction Cleaning Brush

GripperX Headphone Extraction Cleaning Brush

17 piece repair tools are packaged in an organized bag. It is easy to carry. You can put it in the car or the tool box and use it at any time. There are no guarantees. This tool is a single-use tool and does not come with guarantees. The purpose is to accomplish something. The purpose of GripperX is to remove a broken plug from a mobile device. There are phone jacks. 3.5mm jacks are found on phones, laptops and smaller devices. How to use it. Between the broken plug and the headphone jack housing, insert GripperX. You might need to lightly tap it in. It should be the same length as the headphone plug. Pinch with fingers or pliers. Pull to remove broken plug. It's time to restore the function to your device's jack. Use with caution. The device may be damaged if it is inserted too far. The opening may hurt your fingers. Gloves and pliers are recommended for handling this tool.

Brand: Gripperx

👤I had to use a plier and hammer to get it out. A single time use tool. I can hear the tablets again, but my headphones won't work anymore. I am ok with that.

👤I paid for a product but didn't get it. I did not get the brush that goes with the product. I need to use it to get my grandson's audio playing again, so I'm not going to send it back. Trash, Trash! The presentation and misrepresentation of this product was disappointing.

👤The girl broke off her headphones in the iPad. We can resume all of her important preK zoom meetings now that this has been removed. Within 5 minutes, we'll be back to 2020 dystopia.

👤I used it on a kids fire tablets. There is a The tool worked well, but I had to give it a few light taps to get it to grip the broken tip. The jack doesn't work anymore, but I think it's because of the tip being jammed in and the tool not being able to remove it.

👤It's horrible. Absolutely terrible. We contacted the seller for guidance rather than returning the item or forcing the tool because it didn't serve the purpose. We unfortunately followed the instructions that the cretin gave us. The tool we were using didn't work and damaged the item we were repairing. His responses from that point were offensive and moronic. Not worth the cost, effort, or risk of damage.

👤The part that is pictured is bendable once squeezed lightly to fit, and the part that is pictured is a drill bit that twists in to the jack, not a pipe cleaner. One time use is a waste of money.

👤It didn't work at first. I was able to get the broken jack out after trying one more time. It's worth the money to fix the system.

👤It wasn't instantaneous but after a few tries it pulled out the jack. I had to use pliers. I think I could use this tool more than once. This works well with patience.

👤I bought this because I have a Mac mini that I have tried to remove a broken jack from. I followed the videos I found online and the instruction book that came with it, but nothing worked and it started to bend before I could get anything to work. I was impressed by the video that I saw, but I didn't have the same experience, which would have been fine if it was a $5 product. I expected this one to work.

👤I had a jack break off in the iPad Mini and was unable to force the device around the broken pin to get it. If the jack had broken closer to the tip, it might have worked.

👤It took about 8 attempts, with pliers, without pliers, and almost snapped the thing in half. I jammed it in as deep as I could and it worked out. Thank you.

6. JUYEER Headphone Plug Extraction Tool

JUYEER Headphone Plug Extraction Tool

Use with caution. The device may be damaged if it is inserted too far. The opening may hurt your fingers. Gloves and pliers are recommended for handling this tool. If this doesn't solve your problem, please contact them by email. You don't need to return the product, they can give you a full refund. The Jueer tool is specifically designed to remove broken 3.5mm headphones from jacks. It can be used on 3.5mm jacks. Within 20 seconds, you can solve your problem. There is a steel tube between the broken plug and the headphone jack. You might need to lightly tap it in. It should be the same length as the headphones. Normally Pinch with fingers or pliers. Pull to remove broken plug. GUARANTEES: The tool was considered a single-use tool. You can take a picture and send it to them if you can't solve your problem with this tool. You can get a full refund without returning it. Each earphone plug is different. They can't say that this tool is suitable for all cases. Please read the instructions carefully before using this tool. The tool wall thickness has been made as thin as possible because of the small gap between earphone plug and earphone hole. The headphone hole is 0.55 inch deep, so you need to plug it in deep. Pull the metal tube out by squeezing the end.

Brand: Juyeer

👤The corded earbud plug broke off in my laptop. I called the repair shop and was told it would be at least $50.00 with no guarantee. I need to leave my laptop at the shop. The tool's name was finally given to me. After paying under $10 for it, I didn't have any big expecations. After two attempts, my laptop was free of the broken earbud plug and I had full audio again. I held the tool with pliers and gently tapped it. I was able to grab the piece with my fingers. This tool works. I was able to extract a broken plug myself without having to take it to a shop. This one had a tinee tinie screw driver and two tools. The tool I used was bent and probably not reuseable. If I ever give a future issue, I still have the second tool. Thank you for the great product.

👤I was hoping to get the broken Jack part out of the sockets. It is possible that the piece may be jammed too far gone due to the other failed attempts. If you want to try this tool, do it first.

👤This is a one time use tool. It did what I needed it to do, and removed the broken head phone piece from my iPad. It took a few minutes to wriggle it in the right way and squeeze it right, but once I figured it out, it did its job.

👤I drive a jeep. The AUX port on my jeep was broken off. This tool allowed me to get that broken piece out of the AUX port. I tried gorilla-glue on a stick, but it didn't work.

👤I watched and read the instructions before using the product. Did what I needed.

👤I had a broken auxiliary jack in my car. I used this tool to get the broken piece out. It was worth the money.

👤I knew the item was fragile, but it was not going to work.

👤A little flimsy. I tried a few times but it was not successful. My phone and lap top have been fixed. The instructions should be with the product. Great fix.

7. IFixit Pro Tech Toolkit Electronics

IFixit Pro Tech Toolkit Electronics

The audio cable is 3.5mm. Complete: The ultimate kit includes essential electronic device repair tools, like the iFixit Jimmy, opening tools, picks, prying spudgers, a screen removal suction cup, anti-static wristband, and their Mako Precision Bit Driver Set. There is a huge variety of bits designed to fix devices like the iPad, MacBook, and PC. Tools, components, and bits can be safely stored and transported thanks to the foam insert and magnetic closure of the case. The inside of the lid serves as a tray. This is a perfect gift for holidays and birthdays because your favorite repairman can replace tech parts like screens, batteries, hard drives, and more. iFixit's Lifetime Warranty is covered. iFixit's Lifetime Warranty is covered.

Brand: Ifixit

👤The bits are not good. The tip of the Y00 bit was bent after my first use. The left side of the tip is where you can see it. Come on after a single use. The kit I bought had the T3 bit I needed. I couldn't remove the screw I wanted because the bit got twisted after use. This is proof that their bits are not hardened, like another reviewer mentioned. The presentation of this kit is really nice. The quality of these bits is terrible. This set should be top notch in function and not just look pretty. Where on the packing material is it stated on the website? It could be under this bar code. I couldn't destroy it without peeling it off. They are made in china. Not saying all Chinese made products are bad, they do make some really good stuff, but not all companies are the same and will cut costs where they can. This company knows that these bits will not last long and they have a lifetime warranty on them. It's cheaper to replace the bad parts than it is to make better parts. There is a You should buy better quality sets from the USA or Germany for the price. Those will cost you more in the end, but they will last longer than these bits and probably a lifetime. I will never buy from them again.

👤I've used the old-style Pro Tech Toolkit for a long time. It's never let me down. I upgraded to the new Pro Tech during a black friday sale and have had time to use it. The new kit is the star of the toolkit, but I was very impressed with all the components. You can see my video review of the changes and upgrades. I discovered that the steel used for the bits is 6150, which is a type of CR-V steel used for knives. 6150 is a highly resistant steel. The heat treated alloy has good shock resistance and toughness. I'm still amazed at the quality of the bits. Here is a list of applications I'm aware of for some of the special bits you won't find in other kits. Square/Robertson bits are common in Canada. The Industrial Standard is used in electronics. There is a security company called Torx Security. TR6 - Apple Mac Mini TR8 - Xbox and some HP printers, other assorted electronics.

👤I bought an iFixit tool kit for myself. They no longer sell the roll up version that I have been wanting for a long time. This one was not as good as that one. I had to buy it. I got it delivered and I think the iFixit name is going down hill. A standard technician needs a T6 for macs, but it is missing several drill bits. I had to return it, hopefully iFixit will find out. Don't use this product at all costs. It was literally!

👤The kit has a lot of useful items, but the bits in the 000 and 00 are not long enough. Y000 is long but P000 is short. The kids will not be able to reach any Mcdonald's toys with the short Triangle bit. I had to remove the two P000 M1.4 x 3.2mm screws from an old HP ElitePad. I am sad to report that the P000 from Harbor Freight actually got the screws out, despite the fact that the iFixit driver and bits failed. The iFixit kit was no longer useful after that painful and embarrassing experience, so the tray was used to hold the screws, spudgers and blue pry tools for opening the case. I like the way the foam holds the bits. It was easy to get and out of the house. I would like P000 and P00 to be 3mm longer and the #2 Triangle bit to be 5mm longer. There is plenty of steel hanging out of the holder that the folks can easily machine with the existing bits.

8. STREBITO Screwdriver 142 Piece Electronics Precision

STREBITO Screwdriver 142 Piece Electronics Precision

iFixit's Lifetime Warranty is covered. This screwdriver set has 120 bits, complete with every driver bit you need to tackle any repair or do-it-yourself project. There are 22 practical accessories in the repair kit, such as a magnetic mat, spudger, and cleaning brush. Whether you're a professional or an amateur, this toolkit has what you need to repair everything. The electronic screwdriver set has been designed to maximize your repair capabilities. The screwdriver has a comfort grip and a smooth spin. The magnetic bit holder helps you handle small screws. The flexible extension shaft can be used to remove screw in tight spots. The professional tool set has two magnetic tools that can help you save time and energy. The 5.7*3.3" magnetic project mat can keep small screws and parts organized, make your repair work more efficient and prevent you from losing and messing up. Magnetizer demagnetizer tool can help strengthen the magnetism of the screwdriver tips to grab screws or weaken it to avoid damage to sensitive electronics. The rubber bit holder is marked with type and size for fast recognition. The repair tools are held in a bag that is shock-proof and tear- resistant, so no more worry about losing anything. The bag is light and easy to carry out, it can be placed in the home, office, car, drawer or other place. The precision bits are made of 60HRC Chromium-vanadium steel which is resistant to oxidation and is durable. The computer tool kit is covered by a lifetime warranty. If you have any issues with the quality or usage, please don't hesitate to contact them, they will offer you a solution in 24 hours. The precision bits are made of 60HRC Chromium-vanadium steel which is resistant to oxidation and is durable. The computer tool kit is covered by a lifetime warranty. If you have any issues with the quality or usage, please don't hesitate to contact them, they will offer you a solution in 24 hours.

Brand: Strebito

👤Things were going well until they stopped. One of the screws on my MacBook Pro was stripped while I took it apart. I found a quote that said "I should have used a p5 not a t5". I found out that thep stands for pentalobe when I searched for it. The stars in the screws have rounded tips. The product description reads "for Mac" and "pentalobe", but there are no bits that are labeled "pentalobe" or "Mac", so they aren't clearly marked.

👤This kit is on sale for just 18 bucks and includes everything else. It's still a steal even at the regular price. iFixit's largest kit is $65 and has 112 bits. The screwdriver is not made from aluminum like in an iFixit kit. Who cares? Is it any wonder why they're sending their kits to every tech content creator? Buy this and save money.

👤The hard drive in my laptop needs to be upgraded. The reviews for the 142-piece set toolkit were pretty good. I was disappointed when the metal crowbar tool broke when I tried to pry open the flimsy plastic laptop back cover. That's some kind of steel! I don't know how this product got so many positive reviews. I did not recommend this product after I returned it.

👤This kit has it all. It was clear that this is a quality product when I opened it. I could have bought a single screwdriver tool for over a quarter of what this entire kit cost in order to open up my PS4 but instead I have a full tool kit for maintaining my electrical devices and gadgets. Don't hesitate to purchase this!

👤I bought this for my new PC, and it helps a lot. The screwdriver head works for all types of screws. I love the bendable driver head, and it's easier to install a fan on a PC with it.

👤You can't complain about the price. The quality of the set is pretty good. Some people in the reviews say that some bits are bent. One of the multiple sim card ejections was slightly bent, and I only got one bit that was bent. The set comes with a lot of bits and different tools that can be used to do any job on an electronic device. The handle has a number of options for getting in tight spaces and a nice magnet that is helpful in not dropping screws. It would have been nice if it came with a few larger bits, as they aren't too big, which can be hard if you're working on a larger tv. It comes with a magnetic sheet that you can use to organize your screws. If you have the budget, go with something like I fix it, as I would expect it to be slightly better quality and maybe have more bits, but for something cheap, I think this is a great option.

👤I retired as a computer network engineer. I like to take things apart and reassemble them again. I enjoy building things. The older I get, the smaller the stuff is. I am working with someone. There is a There are a lot of tools in this set that I can use. I only used the set to disassemble the cannon camera because it had leaking batteries. The tools worked well. The camera was damaged by the leaking batteries, so it was not worth fixing. The tools worked well for the job. They will be used on many other projects.

9. Headphone Extraction Removal Remove Devices

Headphone Extraction Removal Remove Devices

No risk purchase. If you're not happy with this item, you can contact them and they'll send you a replacement or a refund. All models of mobile phones, pads and computers headphone jack are built to easily remove broken 3.5mm headphone plugs from jacks. The steel tube should be between the broken plug and the headphone jack. To feel the tool grab the broken plug, gently downward. Pull the steel tube out with your hands or pliers. If the broken plug isn't taken out, you should use another one. Please read the instructions carefully before using this tool. The earphone hole is very small, so they have made the wall thickness of the tool as thin as they can. Plug it in deep. A single-use tool is a set of headphones jack removal tools. If you have a question, please email them. You don't need to return the product, they can give you a full refund.

Brand: Aoyutc

👤My son broke the earphone jack on his phone. I was able to get the stuck jack out using this tool. There is a Be aware of the following when using the tool. Try few times and be patient. It came out after the 5th try for me. Do not use excessive force. There is a The edge of the tube can easily cut your finger if you wear gloves. There is a After putting the tube in. To slide it around the broken jack, lightly tap it with pliers and squeeze it with the pliers. There is a Since the tube is thin, it will probably be bent out of shape after few uses, but there are 4 tubes in the kit.

👤These types of tools are nice to have on hand for a try. Don't be aggressive but be careful. These examples are not very strong. The value of getting multiple pieces is what makes me rate it 3 stars.

👤I have to take the car to a shop in order to get the little piece out of the Aux port that it is meant to extract, because it did not work over and over again.

👤I was able to get 2 3.5mm jacks free of broken stuff with these tools. The other brands of 3.5.mm grip sticks are thinner. They might be able to get a better grip on the broken bits, but they might not last as long. Push it in as far as you can, give it a small tap on the desk and pull it.

👤This product made my situation worse. I could get audio out of the speakers if I had used this product before. There isn't any audio in any form. The product bends in the middle and does not allow force to be applied where it is needed. The product can be completely destroyed by using pliers.

👤Have tried this on a few different devices. They haven't been able to remove the headphones.

👤I had hopes for this but they were not realized. If the chromebook was used, I would have ended up breaking pieces.

👤I don't recommend this product. It is a waste of money. It was pointless trying to fix what was broken.

10. Stereo Copper Headphone Adapter 6 35mm

Stereo Copper Headphone Adapter 6 35mm

Quality service. A hassle-free warranty and friendly customer service are included in the package. Please contact them if you have any questions. You can connect headphones to audio devices with the 3.5mm jack accessory. The service life of pure copper is much longer than that of plastic and gold. The copper connections ensure minimal signal loss. It's portable and works with earphone, headphones, karaoke system and etc. A friend customer service.

Brand: Andtobo

👤Someone who has done professional audio, DJ'ing, and never was sold on other versions of these. I've spent a lot of money on adaptors that didn't work, but these are the best I've had. There is a It is obvious that there is attention to quality control, which is normally not something that most would think of with something this small, especially at the great price point. Don't read their title if you're not sure if it's true; everything is gold plated and tested with a voltmeter, it's not your average copper, so don't let that fool you. A lot of old speaker wire is not a standard cheap copper. The gold plated item has the best connection for a small accessory, out of the many I have used in the past. They're excellent, and you lose absolutely zero quality, which I can't say the same about for the bin that I've got years worth of other ones in, which don't have near this quality. You can't beat this price. You have to sacrifice the quality of whatever you need to convert to a 3.5mm jack on most devices. I keep these with me when I go out and listen to high quality headphones on my phone or music player. I hope they don't see the review and the price goes up. There is a There's not a thing about these that I don't like. They're balanced, they're extremely well made, and you can tell the manufacturer, was putting quality control/build quality, as a major priority, which, you don't see often from small adaptors. There is a They are built like a tank, so no "cons" to be seen. If you don't want to go through a lot of balanced adaptors, and you need them, these are the ones you need, and they are cheap. I'm so happy with these, that I wish I could just deal with this company directly, as it's pretty rare to find quality like this at this price. It's like someone who has a passion for music and audio quality was in charge before they let this go out into the world. You can't go wrong if you get them.

👤The delivery date was before these came. I found a 40 year old headphones in a box in the basement. I didn't know if the phones worked, but it was worth a try. They worked well. It's also possible for audio books. Who doesn't need more headphones? I have 2 over the ear and 2 smaller ones that don't cover the entire ear. A good product.

👤I can play my guitar through the Bose soundlink with this fantastic little accessory. Sounds good! It feels very strong.

👤They make a lot of hissing, cut out, and produce a lot of static noise when plugged into my phone and amplifier, unless you find the perfect sweet spot and let the cable rest flat. I plugged my headphones into the same amplifier and it didn't cause any issues.

👤The product is good. I got it because my new iFi Pro iDSD DAC only has a balanced jack and unbalanced one. I wanted to use my Hifiman HD-500 headphones with a 1/2 inch plug. The sound quality of these components was not affected by this adapter. Highly recommended!

11. Headphone Plug Extraction Tool Removal

Headphone Plug Extraction Tool Removal

If you have a question, please email them. You don't need to return the product, they can give you a full refund. The product position is. The kit includes a laser cutting mini steel pipe. These tubes have different thicknesses, slit and cutting angles which can be used for a variety of repair situations. All models of mobile phones, pads and computers have a 3.5mm jack. You can use this tool to remove the broken headphone plug in 30 seconds. You can save 3 hours on a trip to a professional repair store with this tool. Taking care of your money is important. 20 bucks will be saved. First use the short one. It should be inserted into the jack. Press the tube against the table when placing the phone or pad upright. You should put a book under the table. When you can't press it in, turn the tool around. To use, gently downward to feel the tool grab the broken plug. Pull out the end of the tube with your hands or pliers. If the broken plug is not taken out, you should use the long one jack removal. The set of headphones removal tools is guaranteed. They offer a 100% satisfaction guarantee. If you are not happy with their tool kit, please contact them and they will give you a full refund.

Brand: Koara

👤The tool has four tubes of different lengths and thicknesses. Start with the smallest. I can see the wisdom in it, however it resulted in early misery and it crumbled. The next two tubes did nothing. I was ready to give up after pushing, twisting, and having heartburn. Someone said to use a blunt tool and pound it in. I was so angry that I was certain I had ruined the point by putting the broken tip in the jack sockets. It was the last attempt. It's worth it. I got a block of wood and positioned the strongest tube. This is not a long term solution. They all hacked it with a block of wood. I could not pull it out. We had something. The other ones pull out with nothing coming free. The last one was stuck. I had to grab pliers. POP! The total cost is $%&*. The broken tip came out. The Macbook was saved. Come on. This is not for the faint of heart. Don't be afraid to use WHACK and WEDGE, they are useless. Whack andEDGE! I think so.

👤Does what it says would happen. My daughter's phone plug was broken in her car. It would have been necessary to disassemble the dash to replace the jack. The tool got the plug out. It should be considered a single use tool. I had to use a pair of pliers to remove the tool. It is worth it.

👤I was able to use the headphone jack again after removing the broken piece. It is a disposable tool that can be used for only one purpose.

👤My son had a laptop that had a broken headphone jack. We fixed the problem in 5 minutes after I found it. The tool is simple and effective.

👤My daughter accidentally broke the tip of the headphones in her brother's iPod. There were two pieces to the connector. I started with the smallest one and then the biggest one. The pieces were out in less than 5 minutes. You can tighten the grip with pliers if you want it to come out.

👤It worked out well. Even though it is a one time use tool, it is worth the cost.

👤You will get to use them twice before they collapse. I work in IT and was looking for a way to get the broken headphones out of the devices. I pulled out about 6 before they became weak. IT pros need to find something more robust if you only need them for a few uses.

👤The broken jack was pulled out using the shorter tool.

Summary

What is the best product for headphone plug extraction tool for ipad?

Headphone plug extraction tool for ipad products from Koara. In this article about headphone plug extraction tool for ipad you can see why people choose the product. Kenddeel and Apple are also good brands to look for when you are finding headphone plug extraction tool for ipad.

What are the best brands for headphone plug extraction tool for ipad?

Koara, Kenddeel and Apple are some of the best brands that chosen by people for headphone plug extraction tool for ipad. Find the detail in this article. Molex, Gripperx and Juyeer are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com