The CVC 8.0 noise-cancelling microphone is built into the headphones and brings a brand-new calling experience. You can feel the pleasure of a face-to-face conversation. The 2Pack Headphone Hanger can hold two sets of headphones at the same time. Home Office use of gaming accessories. It's made of aluminum and can hold small to large headphones without bending or breaking. Double methods to install hold under your desk surface with strong tape. If you want, you can mount with screws for extra strength and security. It's ideal for home, work, school or cyber café, and it's space-saving. It's compatible with all gaming headsets and headphones. It could be used to hold other things.
👤I intended to mount it using screws. If heat/humidity isn't favorable in your situation, it can be problematic to use solely adhesive. You get an extra one if you have the unit already on the mount. I didn't want to go through the process of removing the glue. I had to peel off the backing to mount it, but it was so difficult that I had to remove part of the mount. It's not clear if that would jeopardize the attachment's strength. I would rather that they don't put the glue on the mount and just let you make your own decision. If you were to use screws with the glue on, the provide screws are too short to have much left inside the mounting surface, which could lead to a failure.
👤I mounted the headset holder to my work desk using the two small screws and the glue already attached to the holder. The holder is elegant in appearance, style and form. The grey color seemed to be compatible with my color scheme. I like that an additional strip is included if I want to relocate the holder, however I wonder if most people throw the additional strip away. I think it's a tough call, maybe most people throw away the two screws. I don't think the mount can be held to any surface with the help of the glue. I put the mount in one location, then realized my screws would need to go through a metal brace, and pulled the mount off the table in order to move it. The screws are difficult to fully tighten without stripping them because of the difficult angle between the base of the mount and the actual hooks, according to another buyer. I agree that I would have liked to have been able to screw the screws into the surface from a different angle, but I didn't have to. The screws should be slightly longer for thos angle. The small screws seem to be enough for the mount to remain attached to my table. While my headset is not heavy, I occasionally bumped the holder and it still held up.
👤The features that made me pick this particular hanger over competitors' product were the beautiful design, superb finish and the options of attachment. Usually, I prefer to mechanically attach hard goods whenever I can over attach them, especially hardware such as brackets, hangers to be surface mounted, and intended to carry a load of reasonable weight indefinitely. I chose this product because of the high performing 3M glue that I could use to place and hold the hanger, and also because I could pre-drill through the factory mounting holes before I screwed it in. It looked like a walk of an install. I used a conventional pistol drill with the smallest drill bit I could find. I had to drill my pilot holes at an angle because of the shallow space between the mounting plate and headset base. When I tried to screw in the smaller wood screws, I found it difficult to maintain the same degree of angle with the screws into the pre-drilled pilot holes. I will change my technique for install #2 so that I don't have the same situation again. The combination of high performance adhesive and two factory engineered mounting holes means that your hanger is going to be there forever and probably as sturdy as the day you installed it. The basic provisions make it easier for a change to be made. Quality engineering of a quality product for anyone who still appreciates quality hardware. Thanks! Drew.
It can hold 10 game disc boxes with the game disc box stroage brackets. Two charging docks can be used to charge and store 2 controllers and a gaming headset stand. It's a great way to organize and charge your gaming system at the same time. The charging dock is the best game experience. It's convenient to store your headphones so they are always in reach. It's compatible with Bose, Beats, Sony, Panasonic, and many more. Christmas gifts for men and couples. Double Headphones Hanger can hold two headphones at the same time, with a headband width within 2.1inch, such as a gaming headphone, children headphone, and so on. The extra port of the smartusbcharging allows you to charge your smart device without the need for a plug in wall. It can detect your device and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amps overall. The safe outlet power sockets are 2. You can charge your devices with this power strip. The AC Outlet has a total output of 1250W. Fire-resistant and hardened plastic outer shell, build-in premium circuitry and microchip ensure device safety. A multi-protection system protects against overload, short-circuits, over-current and other charging issues.
👤I left my home with a lot of wireless headphones. I needed a solution that was small and clean to charge more than one device. Assembly was very easy. The materials are sturdy, but could be better. The front of the unit has the ports on it, but I wish they were on the rear. It would make the unit look better and keep the same functions. It solved my headphones charging issues.
👤The product is not worth $48. The post was made of metal. The rest and base were made of plastic. There were scratches on one end of the post. The post does not fit into the base as pictured in the product image. The base was exposed. The product is not strong. The post is easy to tip over. There were no instructions in the box. The pieces came in a small box and the base was wrapped in plastic. The product is not worth the high price. I would expect a higher quality.
👤The stand is cool. I use it every day and I have a lot of noise cancelling headphones on it. The built in charging station makes it easy to manage the 'phones. The AC outlets are very convenient. The designer put a lot of thought into the function and construction of the stand. When I first looked at it, I thought it was a little pricey, but after using it, I see that it is a real deal. It is a multi-function device that makes it much easier to manage headphones. I highly recommend it.
👤It does the job and it is great having the ability to charge it, but the stand is made of plastic and weak plastic. There is a Don't force it together if you buy it. The rod will snap if there is too much pressure. It is pretty good.
👤I thought it was going to be a quality item. It's easy to put together, but not sure how long it will last. I haven't used the charging part.
👤It is nice to have power outlets. I can charge my headphones from the stand.
👤It was bought for my desk to hold my headsets. It was cheap. I had doubts when I unboxed it, but it is still holding up. It works as expected.
👤I love it! I have three headsets on.
The APPHOME Headset Holder has an 18-month worry-free and friendly guarantee. You will also get an extra glue and two screws. Targeal gaming head phones can be used on PS4 and PS5 consoles, PC, laptop, tablets, and mobile phones. The Targeal gaming headset have high precision acoustic positioning 50mm magnetic neodymium driver, which enhance the sensitivity of the speaker unit, bringing you vivid sound field, splendid ambient noise isolation and sound clarity, shock feeling sound. NOISE ISOLATING MICROPHONEHeadset integrated onmidirectional microphone can transmit high quality communication with its premium noise cancelling feature, pick up sound with sensitivity and remove the noise, which enables you clearly deliver or receive messages. The 120 degree mic tube design makes it easy to adjust the angle of the microphone. ULTRA COMFORT GAMING. Hearing impairment and heat sweat can be reduced by using the gaming headset. It is suitable for gaming players of all ages and it is comfortable and soft. The earcups have lighting designed to highlight the atmosphere. The anti-winding braided cable prevents the 49-inches long cable from twining. You can get the 7.1 computer speakers sound effect adjustment APP software and adjust any 7.1 surround sound according to your wishes.
👤I am amazed that almost any gaming headset I pick up is better than an audio headset. The sound is amazing and the comfort level is off the charts. When you consider that many times in some of these games you might be wearing them for hours, comfort becomes a big part of the quality and enjoyment of the headset. The sound is exceptional, the response time of the sounds is great, and the microphone is great, so I have to give these 5 stars for their value and exceptional performance.
👤I don't usually review items. I don't leave reviews of any caliber, so when I leave one you can tell it's going to be bad. 1. It makes me sound far away. 2. It sounds like everything is muffled compared to the older headset I was trying to replace, which is falling apart. 3. The price is decent, but the noise cancellation isn't very good. Its quality is similar to another headset that costs 20 bucks. Save the money, buy something else.
👤Why don't they try to make it worth buying, make it as cheap as possible, and if it breaks after a month or so, then try sheet meatal, it would cost more.
👤The sound quality is very good for gaming and music, and it has a C type connection.
👤I bought these for my son, who loves them, but he can never hear me when I call him, so the noise cancellation must be great.
👤They didn't work to talk on the mic.
👤I bought these headphones to be able to use them both for work and gaming. It sounds like I am miles away from the mic when I speak, but less than two inches from my mouth. I'm back on the road to find a better headset than the one I got.
👤My son got them for Christmas.
👤Ho deciso di acquistare questo modello di cuffie. PC e laptop, ovviamente per il cavo come, non piacciono gli hardware wireless. Di consueto. There is a I suono pulito sente proprio la sua "potenza", oltretutto tramite il telecomando possibile regolare il volume. There is a Le cuffie isolano abbastanza, non risultano pesanti sul capo ed il materiale. There is a In conclusione, personalmente consiglio l'acquisto del prodotto.
👤Hab den Kopfhrer. Einsatz is wochen. The Anforderung is in Linie fr Vokale Stimmen. There is a Ich werde problemlos verstanden. Es ist bedingt geeignet. Man ist er eigentlich gut. Im Kabel ist der Lautstrkeregler. The iMac ist bei den Regler, das man was fein ist. Man beachten, wie jede Kopfform gleiche ist. The Kleinen was natrlich begeistert. Theusb kabel ist lang, aber ok. Man ist das Kabel. There is a Wenn er is 1 Ein gutes Produkt ist bei den Preis.
👤Destaco de otros auriculares, en una PS4 y seausb. There is no mini Jack. para El Led, se conecta a la consola. Led y micro. It is luz. On o Off, se nota lo envolvente del 7.1 cambia una barbaridad.
Ultra-long use life is offered by the high quality material, which is made in high-quality aviation aluminum. The bottom of the stand is made of solid aluminum, which makes it possible for different sizes of headphones to be supported. It is convenient to carry when you are moving and traveling. The earphone stand can be used in many places. It fits most headphones with a headband width within 3.89'' and device height within 9.64''.
👤I was looking for a stand that would help prop up my headset to prevent it from damaging the charging port or the cords used while charging, and I found this product. The product looked like everything I was expecting. All the screws were missing when I put it together. There was only one baggie that contained an allen wrench, but no screws in the packaging. I looked for holes in the baggie to see if it might have fallen out of the bag and into the small box, but nothing; it simply looks like it was never packaged with screws. It appears that it should have come with 2 set screws for connecting the base with the 2 stand rods and 2 set screws for the headphones, based on the images provided by others. I only received one Allen wrench and zero screws. I am trying to get the necessary screws from the seller or the maker. I would rather not have to send the product back and hope they can send me the missing screws. I'll update my review and follow up on whether or not I get the missing parts. There was an update on the 10th of August, 2018. I contacted the seller to let them know of my issue. They were able to provide a replacement the next week. All parts were present when I received the package. The parts were the base, holder, 2 standing rods, 2 set screws, and 2 hex screws. I found out that these are M3 x 6mm - 12mm screws, and that they are similar to the ones I had with the screws. I've been looking for a stand like this. I found that many of the negative reviews were related to the fact that the user purchased a small stand for their headset. The dimensions of the product are clearly stated in the description. I think this is an excellent product if you get all the parts. It is very sturdy, looks clean, and will help keep your headset in pristine condition.
👤Clean industrial design looks more expensive than it is. Good weight, feels sturdy. The rubber pad on the underside of the base keeps it from sliding on your desk. The assembly is somewhat difficult, but you need to take care when assembling the stand. Attach the two vertical bars to the top plate to make sure they are firmly installed. If you don't install the base, the whole unite may become loose. This will cause the stand to move. I had to disassemble it twice to make sure the bars were snug to the top plate so they wouldn't loosen when attaching the bottom plate. It's not a big deal, but you need to make sure it's aligned correctly, as the unit has no guides or stop points to prevent it from twisting. I know the picture shows a pair of headphones, but this supports my Hifiman HE4XX without issue. This stand is definitely recommended.
👤The metal finish is simple and attractive. The base is heavy to prevent it from tipping over. Top marks for that. The problem is that the screws don't screw in very tightly and it's going to move all over the place on you. There is a This can easily be fixed. Put a few drops of LocTite on the screws. The problem was solved. Even if you factor in a few bucks for LocTite, this headphone stand is still a pretty good value, even if you don't count on it over the years.
The under desk mount is convenient for storing. Easy installation of a springed C Clamp. For a near universal fit on most desks, the Under Desk Headphone Hanger is used. It can be lain flat on the wall when it is not in use, folding or expanding at your convenience. It is easy to remove and re-attach the screw. Soft rubber pads located on both ends of your desk or table protect it from damage. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers, shelfs etc. It's great for hanging game controllers, cables and other gadgets. The TV stand does not have room for the soundbar. The sound bar width is less than 2.1 inches, it is 5 lbs and there are two racks to support it. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.
👤My TV stand doesn't have room for the soundbar so I used two racks to hold it. The sound bar is 5 lbs heavy and supported by two racks. I'm happy it worked out.
👤I'm glad I chose this one because there are so many different models to choose from. It has a heavy, solid feel to it, and it has a nice padding on the arm so it won't damage the furniture. It folds up when not in use. Great product! I am an actual consumer, not a fake reviewer.
👤They are very well constructed. I attached them to the end of the stand that holds my TV. I put my sound bar on them. The sound bar is small enough to fit on them, so they can hold it in front of the TV. The sound bar could not be held on the TV stand because there was not enough room.
👤This thing is perfect. My boyfriend's desk has a small lip on the sides that hangs over the sides, but it is a vintage metal desk. Since these holders are mostly designed for desks with empty space below, I had to search through a million to find one that didn't require so much depth for the tension screw. It works great after finding this one. It's easy to install, but will still hold a large clunky headset. The photos have accurate measurements.
👤There are three people working from home, one of them is a gaming son. I'm running out of places to put my headsets, my son has a gaming headset, and I've got my headset for Teams. This particular hook is unique for a couple of reasons. I like the metal construction. It blends in with any black furniture or decor. If it happens to be in a high pass area of your desk or table, the folding design will allow you to get it out of the way. The ability to adjust the orientation from a vertical to horizontal one was a feature that made this a definite purchase. My desk is made of wood and metal and has a lip on it. The standard vertical style brace clap design is useless because it is short of the height of the table. I can't use boom stands with this table because of the other accessories I have. The only thing I had to do was remove the two allen screws and attach them to the leg of the table. It is now a permanent fixture. A huge problem was solved when I reached for my headset. I bought two of them for work and one for home. A great buy.
👤I always remain objective and honest when reviewing products. I always review with information that I feel others would like to know about the product, as I always assume what I'm writing will affect the purchase. I try to go beyond surface characteristics and input into quality, value and application. I will always end the review with an answer as to whether or not I would purchase the item again, which I believe is the most critical question pertaining to the item. Let me know if you want me to review your items. I was looking for a cheap hanging solution for my headphones and this product was the only one I could say anything about. I usually have my headphones on, but it can flip up when not in use. The screw base makes it easy to use for different sizes of desks. I'll probably buy another one for my daughter. It's a very handy device, serves the purpose well, and is cheap, but sturdy. You won't be disappointed.
TRRS cable is included for phone connection and class compliant. The Photo Savings Deluxe accessory bundle is a convenient way to record. See the description. Simple and space saving are included. Their stylish design features a silicone top pad and solid steel construction to provide a stable foundation for your headphones and clear some space on your desk. STABLE & ANTI SLIP. Their headset holder has a Silicone cable holder at the bottom that can hold your phone in a variety of positions without scratching or damaging it. Their headphone hanger is perfect for keeping your headphones in perfect condition, whether you use it on your desk at work or at home. The convenience and company are two things. Their headset hanger is compatible with major brands including Bose, Bose, and Audio-Technica, and is perfect for headsets measuring 4 cm at the headband and 25 cm tall.
👤The Steel Series headset was the reason I purchased this stand. It comes with an elastic band that rests perfectly with the headstand, instead of just a curved headset. One of the issues I have with this product is that the rubber mat is locked in place when squeezed on both ends. There is a I have an opinion of the over all product. There is a Adhesion: There is a place mat which is inserted into the metal frame. See the pictures. I've moved my stand a few times, and it's come apart, making a mess. The metal frame needs to fit into the rubber place mat. It was good: 4/5. The product will stand on its own once you place the frame with the mat. The product does its job. There is a The material quality was graded at 4.5 out of 5. The product is two objects. The place mat is for cables. The thick plastic mat is not cheap. There is a Overall, 3. This is a good idea for a beginner stand. You get what you pay for, it's only 20.00$. This isn't the best on the market, but it works. If you want something that requires no assembling, you may not want this. It's the same thing. Silicone pad is not a base. It's kind of flimsy, can't stand on the ground. The price is fair for what you pay for.
👤It looks like it's cheap. I don't like the flimsy silicone base and headset rest that it has. The metal stand is the only sturdy part. If the base and headset rest parts were made of plastic, I would like this stand more. I don't think it's worth $25.00. I would not be upset if this had cost me less. I was contacted to offer another product at the same price. They want to see us happy and care about their customers. I bought a bamboo stand after returning the silicone stand. There is a
👤I was looking for a perfect stand for my headphones, and this is what I found. This one is perfect and there are flaws in it. It doesn't ruin the top padded part of the headphones, and has a convenient tray for cable. If your headphones are small, the size is perfect. As soon as I opened the first stand, I bought a second one. My headphones are on the stand. The stand should be able to hold bigger headphones because the headbands are not pushed all the way in.
👤It feels cheap, but it gets the job done. The metal arm/leg, bottom Silicone cup/base and top Silicone headphone rest are in 3 pieces. There is a The pieces are made of silicone. The arm is used to support the product. Some of the base sits on a surface that isn't perfect. It doesn't seem like it will fall over. What is the biggest reason I like this product? The Silicone headphone rest is long and wide and is made of Silicone. It will fit to the headband pretty well because it has some flex to it. It distributes the weight of the headphones across a large portion of the band, rather than a small square location. Many other headphone stands can leave an impression on the headband. The stand has a large area to support it. The HD 800 S headband has the same width as the support, so it doesn't sit inside the channel, but sits on top of the silicone. The only product I can find that won't harm the headband cushion over time is this one. I have no fear that my headphones would slip off. Even with the fully extended headband, my headphones have plenty of room at the bottom. If not for the simple, yet good design and material of the headphone support itself, this product would not get a 1 or 2 star rating.
Universal design - hold your headphones and controllers in one place. It applies to a bag, umbrella, backpacks, keys, cables, etc. To accommodate accessories, please adjust the little arms of the hanger. 1 Hanger Holds 2 The dual arms of the headphone hanger can hold two headsets at the same time, keeping your headphones organized and ready to use. It is compatible with all headphones with their headbands within 1.37inch. The headset hanger is widely used under the glass, wooden or metal desk, table, shelf, cabinet in the home, office, dorm, cyber cafe and other scenarios. It could also be used to hang other items, such as purses, shopping bags, umbrellas, etc. A neater environment will be created with this hook. The design is user-friendly. The mount is lightweight and sturdy with premium aluminum, so that it won't break even if you hold the heaviest headphones. The raised tips on your headsets prevent them from falling. When you need to replace something in unforeseen circumstances, you will be able to do it with extra glue. Two mounting methods. The headset stand can be mounted without causing damage to the desktop surface, and it can hold up to 4.4 lbs. With screws, the headset hook could be installed for more firmness. Choose the installation method that is right for you. You can get a refund within 60 days or a free replacement within 12 months if you have non-human reasons. You can contact them via Amazon Messages if you have any questions.
👤This double-hook headphones holder does exactly what it is supposed to do. It holds two pairs of headphones side by side. The double-sided hook makes it easy to store and remove your headphones from underneath a desk or shelf. I gave the Adhesion category a 4-star rating, since I have only been using it for a week and it has a tight seal. I am confident that it will be long- lasting since it is made with a 3M adhesive and includes a replacement strip. There is a It is recommended that you allow 24 hours for the glue to seal completely before hanging your headphones. This is part of the instructions. I purchased this one because of its design quality and price, and I am very satisfied. I hope this insight helps you make a buying decision, as I am not an employee of this seller or a representative of this industry. All the best!
👤I couldn't find a way to hang the heat gun on the side of my crafting table after I bought it. Many of the headphone hangers are plastic or foam, and I thought they would be perfect. This one is made of metal, not plastic or foam. It's the perfect size to fit under the edge of my crafting table for my heat gun. The gun is held with the nozzle up so that the heat won't affect the motor. There is a This comes with a glue to stick it on, but also a couple of screws to put it in my table. This isn't designed for this purpose, but it fills the bill perfectly.
👤I wanted to hang my headphones under my desk. The desk has a smooth bottom that should accept the included glue, but I decided to use the included screws just in case. It was difficult to install the screws due to the design of the headphone hanger. Since a screwdriver cannot be driven at a straight angle, the screws need to be put in at an angle. I predrilled the holes for the screws, but since the screw goes in at an angle, it sheared the screw off. I was disappointed that the screw sheared so easily, and the design made it nearly impossible to install the screws, because I was using a hand screwdriver to drive the screw. It is a good material and slightly smaller than I thought.
👤I like that it's double sided and works well for my purposes. It will be too narrow for some headphones. I found the measurement listed to be accurate. I only use this to store one pair of headphones and the other hook for hanging cables that aren't in use. I would like to secure it with the screws provided, but unfortunately the way it's designed makes it difficult to approach from an angle. I'm not sure how you could get the screw all the way in. You would need to drill a hole before you install the glue, and poke holes through it, so that's something to keep in mind. Unless you plan to put something heavier on this, it's not necessary. I wouldn't try to use the screws for something like a bag hook because they are small and mount from two corners.
A headset stand with built in charging station and built in headset hooks can be used to hang two sets of headphones or smart accessories. There are three USB A ports on the device. It supports workspace organization. It's easy to crowd your desk with gaming accessories or hybrid work equipment. The headphones stand can be used as a headset mount. Store your headphones on the hooks. The power cord is routed through two cable clips for a clean and organized look. Your desk needs to be adjusted. You can make your workspace more productive by decluttering your desktop. Adding a headphone stand with a charging port will make it easier to charge your headphones. Charge headsets, computer accessories, gaming desk accessories, cell phones, and smart devices. There are technical specifications for theusb a charge 100 - 240V - 50/60Hz 0.6A MAX. The output is 5V 4.8A total. No data connection, only charging. Installation is easy using the included 3M VHB tape or wood screws. The wood screws are for desks with unfinished surfaces that are at least a quarter-inch thick. The under desk headphone holder is ideal for gaming setup accessories and replaces a bulky desktop headphone holder stand that takes up too much space. The desk headphones holder has a dual headset hook. There is a power cord, AC cord, 2 cable clips, and wood screws for the unfinished surface desk attachment.
👤This is great! The strips that came with it were small, so I didn't bother trying to use it. I will probably use them for something else. It does what I need it to do and came with all the necessary parts. The figure 8 is the one that goes straight to the wall. When you have something plugged in and charging, you can hear a faint squeaking sound because of the electricity. For someone who is sensitive to high pitched noises, it could get annoying.
👤I have been postponing getting a stand for my headset for too long, and luckily I chose the right brand and product. It fits my Steelseries Artic 7 gaming headset perfectly, it blends in with my desk, and it's very sturdy. The charging ports are very convenient. I have a short cable to charge my headset. I've owned this for about a month and I haven't had any issues. There are some poorly designed headphones under the desk that can cut you. You don't want to attach anything below your desk that isn't sturdy, low profile, and blunt, so avoid cheap sharp plastic. Stay healthy!
👤The sound is good. I bought two sets because I'm old and hard of hearing but my grown son who is my electronics guy hears just fine. We can adjust the volume to our liking even if we don't get the same sound from one video to another. I can't comment on the topic as there wasn't anything to adhese. My son says it was easy to set up.
👤I'm not sure what to say. I bought it to get my headphones off. I put it under the desk and hung my headset from it. Not a single problem to date. I'm happy with the quality of it.
👤There are some complaints about the sticky not working. The man was very well sticked. You should like the placement because it can't be moved.
👤My husband drilled it on the desk because it didn't stick well with the sticker. It has been okay so far.
👤Bigger than I anticipated. I was thinking about putting something on the nightstand. It is too big for my desk.
👤I wanted a better way to store my new wireless over the ear headphones. The under-desk mount that allows me to plug the headphones in for charging is an elegant and simple solution. The stand is adhering to my desk. It works very well.
👤Plastic, cable, and ports are all of the highest quality. It looks good and sticks to the desk.
You can get a refund within 60 days or a free replacement within 12 months if you have non-human reasons. You can contact them via Amazon Messages if you have any questions. Simple and space-saving. Their unique and stylish headphone hanger is made from solid aluminum alloy and wood to provide a stable foundation for your headphones and clear some space on your desk. TR902 is taller than other headphone stands and has a larger cable holder to keep it balanced. STABLE & ANTI SLIP. Their headset holder has a wooden cable holder at the bottom that can hold your phone in a variety of positions without scratching or damaging it. Their headphone hanger is perfect for keeping your headphones in perfect condition, whether you use it on your desk at work or at home. The convenience and company are two things. Their headset hanger is compatible with major brands including Bose, and Audio-Technica, and is 5 cm at the headband.
👤The Bose headphones are sticking to the wood and starting to peel off, despite the stand looking great. Thanks for ruining my headphones. I am not happy with the purchase.
👤I was looking for a headset stand to hold my new purchases. The stands are expensive. I kept scrolling past the stands. I came across this. I knew it was the one because it looks stunning and the reviews are great. It's no wonder why. Assembly is a no-brainer. The base and stand are part of it. Push them together! It's done! Ready to leave! It takes 2 seconds. There is a The headband rests on the curved top part of the stand. I thought it was a square. I thought I might have to modify it. It fits my headset perfectly. The edges do not dig into it. There are pictures of this curve. There is a The base is covered with a big grip. There is a The metal is beautiful. It feels strong. Excellent quality. There is a The only complaint I have is that my bamboo pieces are different shades. I'll probably be the only one to notice. I would have liked it to be matching. 5 stars would recommend anyone.
👤The shipping box was almost weightless when I picked it up. There is a The unit works well. The base is large enough to hold it up if the cord is tangled around the shaft. The thin aluminum shaft works well for the HD800 headband, but it's a bit narrow for the Audeze LCDs, and it would work better if the dip in the middle wasn't there. I ordered the Woo Audio double stand to sit by my main system, even though I have this one in the bedroom. It's not overpriced by much. I don't think I need two stands. The banana hook is too narrow for the HD800s or the Focal Clears, so I could use one of the steel strips in the suspension headband. The banana hanger worked well for the HD600s. The all-metal banana hanger is my favorite for cost effectiveness, but the hook is too narrow for headbands of more than an inch.
👤The bamboo version is reviewed. There is a I'm happy with the $25 that I paid for these. The bamboo base and top piece are very well made. The quality of the stand is excellent. It is very strong. I have a pair of HD 800 S that are heavy, and this stand doesn't flinch. The base is large and the aluminum neck is strong. There is a This is a five star stand, and it is 888-282-0465 for my Sennheiser HD 598s. If you have lighter weight headphones, what I'm about to mention won't ever apply and this gets a huge recommendation from me. If you have heavier headphones, the top piece of them can cause problems with the soft material of the headband. The bamboo is hard and the sides are sharp, so that's why it's hard. It would have been great if there was a softer material on the top piece that would allow headphones to sit on it without putting too much pressure on the band near the sides. There is a I took this down to four stars because of the creasing on my headphones. I'd give these five stars if I hadn't bought those and used my other weighted pairs. It is an attractive stand that stays in place. I got a wooden stand that looked like an Omega symbol, and I have another one. It works well for the headband, but it's hard to get headphones off. It's not as strong at the base. I'm glad I bought this, but my 800 S headphones are on the older stand until I find a solution to the creasing or something soft for that slot.
If the cable is fully inserted and the switch is on before you use, the volume can be adjusted and your devices are suitable for their combination of audio and voice connetors. They offer a 12 months warranty to their customers when they purchase a gaming headset. The ear pads are foldable and collapsible. The ear pads are magnetic, making them easier to clean and maintain than other headphones, and the headphones fold inside the arm, making them perfect for easy storage and travelling. The lightweight design of the ear cushions allows for up to 8 hours usage without excess pressure build up, meaning you won't feel any pain even after a long game. The weight is only 0.66lb, which is 40% lighter than standard gaming headsets. The bendable microphone arm can be fixed to any position to ensure the clearest voice pick-up, and filters out surrounding environmental noise and static. The Senzer noise cancelling headset with microphone provides real-time in game chat without delay, making it easier to communicate with team-mates, friends and family. The surround sound gaming headset gives you crystal clear audio and is a great way to enhance your gaming performance. Pick up the direction of gunfire, vehicles and voices more clearly, as well as enjoying a more enhanced audio experience as subtle sounds like footsteps, wind and rain are projected with more clarity and precision. Plug and play multi-pLATFORM COMPATIBILITY works with most modern devices that have a 3.5mm jack, such as the PS4 and XBOX One. Plug & Play makes it the ideal headset for travelling or as a gift, safe in the knowledge that it will fit a multitude of devices.
👤I own two pairs of Senzer's SG500 headphones. I gave the first pair to a family member and then grabbed another pair for myself. The sound quality is good and they feel light and comfortable. Pros and Cons: - The build is good, the soft weight is easy to travel with, and the microphone is permanent. The band is great for the buck. 100% would recommend.
👤I use these headphones for work. I needed a mic that wasn't attached to the wire part of the headphones. The mic on the wire of the Beats Solo3 would rub against my shirt or hair and my coworkers would be able to hear it during zoom meetings. My mic wasn't as clear when I went wireless with the beats. These headphones are very comfortable. The memory foam ear pads are squishy and there is no squeezing on my head. I'm able to wear these all day for work and not have any headaches or neck pain. I was a little worried since they look huge in the listing, but they fit perfectly and I am small. These would be great for kids and small adults. They can extend for larger heads. I like that they fold up so I can leave them on the side when I'm not working. The earpads are magnetic and can be removed, but it's not clear why anyone would do that unless it's to change them. The best part is how easy it is to connect these to my computer. It's just one cord, not the other way around. I've been using the main input aux cord, even though these come with an accessory. There is a The sound quality is what you would expect from a pair of headphones. I can't hear the AC running in the background if I have music playing, but it's not as bad as the Bose noise canceling Bose. The bass on these is clear and not distorted like most cheap headphones. I'm happy with the sound quality. They look like pilot headphones, but they are lightweight and portable. I wish the mic could be turned off, instead of being bent upward every time I want it out of the way. If I keep bending the mic wire upward, how long will it last? There is a knob on the left side that I don't think does anything.
👤I found these headphones on Amazon. If I could, I would give these headphones 10 stars. The sound quality and price are what I base that assessment on. I am a DJ. I use expensive headphones. $200 is the retail price for these headphones. I have to take them off my head because it's too loud and they won't break. The sound quality is better with these headphones for $50. The drivers produce clear sound. The way in which each headphone is made with a large cavity produces a very good base. The comfort takes these over the top. I could wear these headphones for hours because of the soft cushions. I plugged them into my PC and played some music through them. The sound was clear and I was amazed that this was using a video from my PC. They did not distort one bit when I turned them up as loud as they would go with the volume on my PC. If you're going to be using the headphones for music, you can tilt the microphone away from your face. It comes with the y splitters so that you could use it on a PC as well. The microphone is good. He adds a lot of depth and quality to the experience. I hid them in a cabinet because I don't want my son to try them because he's going to want to smoke them. I like the retro look of these headphones. If you're looking for a good pair of headphones to play music on, I highly recommend these! Purchase them now! He will be happy that you did that. If I ever break my DJ headphones, I will just use these. I paid for one of these and could buy four more for less.
We offer lifetime technology support. Any confusion or details inquiries are welcome. Also, note: The charging cables are not included. Store your headphones so they are always in reach. It has a small footprint to help organize your desk. Major brands that are compatible with their headset hanger are: Sony, Bose, Beats, and AKG. The lights are RGB. There are 9 lighting effects modes, up to 16 million colors, and theRBG Headphone Stand can show an amazing gaming atmosphere. Simply pressing a Touch switch will select that. A great gift for a man and a boy. The 1 portusb includes a port to transfer files or charge with speeds up to 480 Mbps, support popular OS like Windows, Linux, Mac with plug and play function, no drivers required. The dual holder can hold two headphones at the same time, with a headband width within 2.1inch, such as the Active Noise Canceling Headphone, Telephone Headset, Children Headphone and so on. If you are not happy with your purchase, please do not hesitate to contact them.
👤This thing is not heavy but it has a bit of weight that makes you trust it. After watching that video, you should trust it as well. The plastic on the pieces is snug so it won't fall apart on you, and the rotation of the lights on the bottom is smooth. If it didn't work on mine, this thing is awesome. I haven't tried the device yet. It was worth the $16 I spent on it. There is a The Senn HD6XX and Senn HD 280 Pro are headphones. I might get something more sturdy, but for these, it is perfect.
👤I purchased a couple of headsets that I needed to plug into my computer and a wireless to charge for a console at the same time I purchased this. I was a bit leery of how sturdy it would be when I first put it together, especially if only one headset was on, and I was afraid it would fall over all the time. It has never fallen over in 6 months. I like the look of the LEDs in my work station and it is easy to change them up. It was a good purchase.
👤If you only have one of those two on at a time, the stand will tip over, making it slightly heavier. The thing is 20 bucks. I'm not complaining. It's 20 bucks and it's nice, but I wish it had more colors. I mentioned it was only 20 bucks. Because it is.
👤The product was easy to put together, but if you look closely, there is a line inside the tube that will let you line up with the base, but it is not visible.
👤The dual version was bought. The components are easy to assemble, but poorly made, and very poor quality.
👤My partner and I use this device every day to charge and put away our headphones. It has helped us consolidate space and charge our headphones on a different device. Since the product can hold two headphones, I wish there were more ports on the stand. There is a I use this product on my desk every day.
👤It looks good and does what it is supposed to do. The top is made of plastic and will slant a bit when you take off the headsets. It is worth looking at. The base colors are great. I love it.
👤The Kafri dual headphone stand is very nice. I was worried that the stand would be small to hold my headphones. You can clearly see that it does. I'm very happy with it. My keyboard, mouse and charging dock blend nicely with the lights on this stand. Pick one up!
👤Lleg super ahora. Es super fcil de armar. Se ve precioso, agianta, audfonos. Tiene cable largo. y entrada. Theusb is para cargar el audfonos. It was lo.
👤Me gusto mucho, la iluminacin, su resistencia, es calidad-precio.
👤En producto, tiene buenos efectos.
Headphone rack for desk products from Apphome. In this article about headphone rack for desk you can see why people choose the product. Kafri and Targeal are also good brands to look for when you are finding headphone rack for desk.
Apphome, Kafri and Targeal are some of the best brands that chosen by people for headphone rack for desk. Find the detail in this article. Eletecpro, Apphome and Avantree are also brands that their products are worth to check.