You don't need to worry about the quality of their headset stands because they are made from acrylic material. They are responsible with their headphones. If there is a problem with it, please let them know. Good after-sale service will be provided by them. The game controller holder is used for vertical placement of various game pads, which saves space, and up to 2 game pads and 1 headphone can be placed. You can put the controller on the stand and hang it. The mobile phone can be held in the storage organizer. Excellent. The headphone stand has a metal base, a sturdy hanger, and a low center of gravity, making it stable without being hit. The controller holder is made of rubber. The bottom of the headphone holder has a Silicone pad to protect it from slippage. The headset holder is small and light, and it's easy to carry with you wherever you go. The wireless headset stand is great for home, office, studio, bedroom or next to your TV. Their controller holder stand is easy to assemble and install. It's very easy to hang the game pad or headset on the stand if you follow the installation steps of the manual. The game controller storage brackets has passed many tests. They want to provide customers with the best products. If you have a question about the controller stand mount, please contact them and they will answer it in 24 hours.
👤I bought this to organize my desk. Normally I place my headphones on top of the computer or desk and it looks messy, but I keep my phone and tablets nearby. I don't have much space on my desktop because I use a large monitor. My phone, headphones, and tablets are on this stand. The top controller would go where my phone is. Since I was using it to take photos, you don't see it. I hang my cables on the extra arms. It is a very good stand with a lot of functions. It took about 3 minutes to set up and they provided a tool to help tighten the rods and screws. The parts that are made of rubber help protect my phone and tablets. If there are any changes in the next few months, I will update my review.
👤I dropped my expensive headphones on the ground because the glue on the hook fell off. I was looking for a stand that wouldn't take up a lot of room and hold extras. It was easy to assemble with my son, now I use it to store my gaming headphones, noise-canceling headphones, PS4 controller, Switch Pro controller, and my phone. I'm not worried that it will go off my desk because it has non-slip feet. The metal slots at the front of the case are rubber coated, so if I slid my switch or Oasis out of the case, it wouldn't hurt them. I'm confident my controllers won't slide off if the stand is bumped or when I remove them because they have a nice rubber grip on the controller rests. There is a large hook on the back for cords. I'm going to loop a micro around it to charge my headphones and PS4 controller. This little unit has a lot of the same options as a single stand.
👤I was looking for a headphone stand, but this one could also hold two controllers. I gave it a try. I'm happy with how my desk is organized, even though I thought it was just two controllers. I put my switch in the dock since it showed that you can put a switch on it. One concern is that the front doesn't have a rubber foam so you can't feel the metal. It's an okay width for some phones, but I wouldn't want to put anything wider than that.
👤Nice stand. It's easy to assemble with all the tools you need. The edges of the metal catch the foam on the headband when I use my Black shark V2 and I would give 5 stars. Nothing has been damaged. I think it will wear on the headphones eventually. It works great for controllers, switch lite, and phone display/storage. The little dips make it easier to use wired devices.
👤The look of a desk or game room is greatly improved by having the controllers and headset on the stand, compared to sitting on the table, armrest or floor. If you use most or all of the racks, it saves space. There is a The big metal base needed to balance the weight of the headset also has little rubber covered racks to hold up a phone or tablets or whatever, which is really neat. Assembly is very easy. I was given two spare screws for the bottom and four spare screws for the top, which confused me a little, but you'll have enough even if you get a bad screw.
The design of the laptop has a heat vent. The 100% aluminum alloy body diffuses heat to cool down your laptop. The dual headphones stand holder is a great place to display multi headphones, big headphones and small headphones. The dual headphone stand has double paddings which hold your headphones in balance, compatible with all kinds of headphones and gaming headsets on the market. Sturdy: The multi headphone stand holder is made of solid aluminum alloy, heavy base, solid aluminum poles, solid aluminum hanger with leather padding, even one headphone on, no wobbling, no sliding. The multi headphone rack helps to organize your desktop setup from cluttered areas, protect your headphones and stay safe from falling and scratches, suitable for: gaming, musician studios, office, workspace, home JOKItech provides a 10 years life warranty on your order. The customer service is under way.
👤I'm usually not a fan of buying products from brands I'm not familiar with, but this stand had features I wanted, and it was all metal. Once everything is tightened down, there is no play in it. Even with the bands extended for my melon-esque noggin, it has enough height with room to spare for big over the ear headphones. The base is stable enough to support heavier cans on one side, and it won't tip with both pairs on the other side. I was looking for a stand like this.
👤I needed a stand for my headphones. I had a few stands before. I think so. This one is better. It has a simple design. I needed it to be tall so it wouldn't sit on the joints and it had to have some weight for the right balance. - It took 2 minutes to put this thing together. It had everything you needed. If you only have one earphone, you can use this stand. It won't tip over. There is a large footprint to solve the balance problem. This one doesn't have balance issues and takes very little space. I tried to knock it down with my headphones on. The base has some weight. You will need heavy headphones to have a chance at knocking it down. It has a rubber orSilicon pad on top so it won't slide around. It feels sturdy and well planted. I only had to look at the best selling headphones stands on Amazon that are around $10 to see they were junk. They use too much plastic. The story of the Jokitech is completely different. Get this one if you spend the extra money. It's probably going to last a long time.
👤The stand has good weight and is functional. I had one con that kept me from giving the stand 5 stars. The bar was sharp. The rest of the bar was where the problem was, but there was a pad where the headphones rested on each side. I could see myself easily bumping that portion of the bar and causing damage. I lightly sanded the edges to correct it. I don't think it's a problem, but would be surprised if I was the only one. There is a They are heavy enough to do the job without tipping. I would buy them again.
👤I own a recording studio and have gone through a lot of headphone stands, so I consider myself to know what works and what doesn't. This one doesn't work very well. It is easy to tip over, the base should have more weight and a way to attach it to the surface it sits on. The headphones rest on a thin piece of metal. I can see it bending under the weight of headphones. The two post design that attach the base to the rest is silly and should be replaced with a heavier post that would look better and hold more weight. If I can't get this thing to stay on the mixing desk, I'll have to drill it and run screws through it to keep it from falling. I don't recommend this product.
A good helpmate for home storage and organization, this wide application is suitable for holding a wide variety of items, like coats, hats, handbags, umbrellas, towels or robes. The dual gaming headset stand is perfect for saving desk space. The double-end hangers have a base that provides great stability. The multi-color flowing and single-color breathing mode is a fantastic lighting mode. One button that can be used to turn off light mode. The light is not on when plugged in. It is convenient to transfer data and support devices with plug and play function, like keyboard and mouse, without a driver needed. The base of the headsets stand is designed with a mini slice for phone holding, and the side of the stand has hooks for cable organizing. It is compatible with all size headsets from any brands. When not in use, provide a balanced stand to place headphones.
👤I wanted to clear up some space on my desk so I ordered this. It fulfilled that function, but there were some nice surprises for me. It has two separate lighting effects that can be turned on and off separately, and it also has a full two-portusb hub that can be used to charge it. I didn't notice if the description included these. I am happy with this device. The base is nicely weighted and won't tip over unless I pull on it hard, which is on me.
👤This is a good stand. The item is in a box. The contents of the box were as they should have been, even though it didn't have a seal over the lip. There is no need for an assembly. The stand has a flat base and no wobble. There was a light beam in the middle of the tower along with the rgb around the base. It was priced at 29.99 when I first saw it. It jumped $5 in 2 days. It is now $39.99. I got it for a low price. This is my first rgb device and I am not sure what it costs, but I wish I had gotten it at a cheaper price. I would like to get it at a lower price. I won't be able to do that by the way this is sold out.
👤Holds two headsets. The blue light can be turned off with one switch. The base light can be set to rainbow, red, green, blue, pink/purple, yellow, and off. There is no wall plug with theusb cable. The built-inUSB ports on my Xbox Series X give me enough power to charge my wireless headset. The headbands rest on the arms that are not rounded. The box has been assembled. It seems sturdy so far. There is a logo on top of the base.
👤The best white version of the dual headphone stand. The rgb is very pretty. You can turn off the blue strip on the bottom and also change its color. I like it. I have a pink and white setup. I use it to hold my two wireless headsets that both require charging, and it has two usb ports, which is convenient. I managed to do some decent cablemanagement using the hooks on the back of the cables. I had to use the cable tie that came with the headset stand as well as a twistie tie to hold the cables properly, but that was inevitable as it was two long cables held in the back. I will not be using the phone stand because the cables are in the way. I will keep you updated if there are any issues.
👤This is a nice headphone stand that I got because it holds two headphones, is RGB, and has a passthrough for myusb headphones. The tower only has blue lighting, but it perfectly matches my setup. There is a There are pros and cons to individual tower and underglow lighting. I put a black cloth over my computer, I would have liked the 2usb passthroughs to be on the back or sides instead of the front.
It can hold 10 game disc boxes with the game disc box stroage brackets. Two charging docks can be used to charge and store 2 controllers and a gaming headset stand. It's a great way to organize and charge your gaming system at the same time. The charging dock is the best game experience. It's convenient to store your headphones so they are always in reach. It's compatible with Bose, Beats, Sony, Panasonic, and many more. Christmas gifts for men and couples. Double Headphones Hanger can hold two headphones at the same time, with a headband width within 2.1inch, such as a gaming headphone, children headphone, and so on. The extra port of the smartusbcharging allows you to charge your smart device without the need for a plug in wall. It can detect your device and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amps overall. The safe outlet power sockets are 2. You can charge your devices with this power strip. The AC Outlet has a total output of 1250W. Fire-resistant and hardened plastic outer shell, build-in premium circuitry and microchip ensure device safety. A multi-protection system protects against overload, short-circuits, over-current and other charging issues.
👤I left my home with a lot of wireless headphones. I needed a solution that was small and clean to charge more than one device. Assembly was very easy. The materials are sturdy, but could be better. The front of the unit has the ports on it, but I wish they were on the rear. It would make the unit look better and keep the same functions. It solved my headphones charging issues.
👤The product is not worth $48. The post was made of metal. The rest and base were made of plastic. There were scratches on one end of the post. The post does not fit into the base as pictured in the product image. The base was exposed. The product is not strong. The post is easy to tip over. There were no instructions in the box. The pieces came in a small box and the base was wrapped in plastic. The product is not worth the high price. I would expect a higher quality.
👤The stand is cool. I use it every day and I have a lot of noise cancelling headphones on it. The built in charging station makes it easy to manage the 'phones. The AC outlets are very convenient. The designer put a lot of thought into the function and construction of the stand. When I first looked at it, I thought it was a little pricey, but after using it, I see that it is a real deal. It is a multi-function device that makes it much easier to manage headphones. I highly recommend it.
👤It does the job and it is great having the ability to charge it, but the stand is made of plastic and weak plastic. There is a Don't force it together if you buy it. The rod will snap if there is too much pressure. It is pretty good.
👤I thought it was going to be a quality item. It's easy to put together, but not sure how long it will last. I haven't used the charging part.
👤It is nice to have power outlets. I can charge my headphones from the stand.
👤It was bought for my desk to hold my headsets. It was cheap. I had doubts when I unboxed it, but it is still holding up. It works as expected.
👤I love it! I have three headsets on.
Quality Gourmet provides a 90-Day Money Back Guarantee and a 24 month warranty that will ensure you a hassle-free purchasing experience. If there is a quality issue with this headphone rack, please contact them. A great gift is a universal headphone stand with 3 charging ports and 2 outlets. 3 port smartusb charge It is convenient to charge your smart device without a plug in wall, because it can detect your device automatically and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amp overall. You can charge your devices with this safe outlet power strip. The AC Outlet has a total output of 1250W. Fire-resistant and hardened plastic outer shell for durability, no risk of wood flammable and metal leaking, build-in premium circuitry and microchip ensure device safety. A multi-protection system protects against overload, short-circuits, over-current and other charging issues. The COZOO Headphone dock, Power Strip, and 3-Port USB Charger come with a 24 month warranty and 90-day money back guarantee. If there is a quality issue with this headphone rack, please contact them.
👤Okay. The headline speaks volumes. This is a very functional stand and it is very cool. There is a The price is correct. Good deal. The workhorse part for my personal use is the charging of my mobile phone, IPad, and Marshall and Bose headsets. My grandkids have to charge their IPads and mobile devices when they come over. All at the same time! There are minor design flaws. According to me, of course. The headband is not padded. The foam cushion will be damaged over time. The vertical stem is straight up and down. The ear cushions have to be on the stem if you place the headset on the pedestal. Over time, dents will form on your ear cushions. That's it! These are pieces of equipment that are very expensive and are sitting on this stand. In conclusion? I installed it and like how it looks, I'm keeping it. I'm using it. I'm very happy with it. See you.
👤I wanted to put a small charge station on my bedroom furniture. I stumbled onto the Cozoo stand and thought I would give it a try. The design is simple and has 3 ports. There is a large press button in the corner and a small light under the middleusb port that indicates off. I didn't think I'd use the 2 power outlets, but I've found myself connecting things there because it's convenient. The entire unit is solid and won't tip over. I am happy I found this. It works and looks great.
👤I was excited to receive this in the mail. I plugged it in to charge my phone. The ports do not hold a charge. It connects and disengages from all 3 ports. I've tried plugging the device into both a power strip and a wall outlet. The tries didn't charge my phone. I tried different cables. The outlet ports work well. They can charge my laptop with a brick. Only 5 of the ports work correctly. The stand works great if I hang my Sony or Home Theater Radio Shack headphones. If you get it for the 2 outlet ports and as a stand for headphones, I would pass it on, but if you get it for the two ports and as a stand, I would recommend it. I have to buy a seperate unit for my devices which means that I'll be using 1 outlet port to plug that into and I'll have to use more cable to deal with. I would have given it a 5 star if it had worked correctly.
👤My dad loves it! They sent me the wrong item after a bit of a mixup. I am glad I gave them a second chance. There is a The base is heavy and unlikely to tip over and spill your expensive headphones/headset on the ground. There is a The charging is spot on and can charge two phones and a headset in a few minutes. It has two outlets on the back for additional charging or if you just need an extra couple plugs for your PC. Useful! There is a The stem and rest for the headphones are thin and light, and I wish it came in more colors. The center of gravity is very low, which makes it hard to topple over, and I fear that they might snap. The top is molded plastic and you can see some of it from the process, but it shouldn't have to be trimmed with a razor. There is a The base's construction is very high quality and there is an on/off switch so it isn't drawing power. There is a The excellent base design made this product a solid B. Would definitely recommend it. They should send the right product.
The 2 headphone stand provides a stable foundation for two or more of your favorite headphones while saving your desk space and is ideal for gaming storage. The dual headphones stand holder is compatible with multi headphones and has a safe and secure storage option for you. The headphone rack protects your headphones and helps to organize your desktop setup. The under desk rack can be used for home,office,classroom. The ps4 gaming headset stand has a tray that can hold cables, pens, notes, cell phone and headphones. It's perfect for your desk. The two headset stand is very easy to install and measure approximately 11” L x 3.50” W x 10.2” H.
👤I have had this product for several weeks now and I think it's a good buy. The base holds the headphones neatly. It takes two minutes to assemble. The lack of padding on your headphones leads to marks on the headband padding. This could cause damage to the headband. The styrofoam that came in the packaging was nice and I decided to use it to eliminate the issue. The styrofoam and instant padding were cut with crazy glue. I wish the manufacturer had thought about a more polished look.
👤The bad: Not very Sturdy. Can support two heavy headphones. It can also support just one heavy headphones without tipping. There is a There are screw holes for a smooth final surface. It's always nice to have a few extra screws in case. There is a Very cheap quality is the bad. It feels like a middle-school shop class project. It is scratchable. The pieces were smudged, scratched, and scuffed even though they were well packaged. The nature of cheap acrylic. The edges are not finished. The thing sits crooked because the pre-drilled screw holes weren't even used. There are other details. It works as advertised and is sturdy. It's cheap because it's not worth the cost. The price should be under $10
👤The stand was easy to set up. All you need is a screwdriver. It has some heft to it. It won't fall over unless you push it. You can fit a third one over the middle, even though it was designed for two headphones. Right now, it holds my headphones and studio equipment. There is a The tray at the bottom is a good place to keep your wires organized, and you can even keep earbuds in them to keep all your headphones in one place. There is a It does all this while looking sleek, so it's not just some ugly thing sitting on your desk. It stays low profile and focused on the headphones that rest on them, but they also have enough substance to keep them there and not let them fall over.
👤This is a good value, and the best one for a dual headphone stand. I wanted the arm edges to be curved up so that the headphones wouldn't slip off if they were pulled. It was robust, stable and balanced. I would like it to have curved arms to prevent the phone from being hit. I wish that the dip in each arm was wider so that headphones with wider bands fit within the dip without curving against the edge. My Empyreans have a leather band that curves up, and I worry about it changing shape over time.
👤The stand is plastic, but it works for me. Four screw assembly, two into each end of the vertical piece, and you're done. The brass bushings for each screw show the quality, which is nice. I agree with the other reviewer that there is no padding on the arms that hold the headphones, but I used some felt for furniture legs that were left over in dark brown to place the headphones on the horizontal arms. The brush is an interesting addition, I would prefer two pieces of padding for the arm, but that's just me. The storage tray on the bottom is where my cables sit nicely. I'm very happy with it.
The MAX SMART Cupholder has a small tray that you can use to store small items such as notepads, paper clips, binder clips, charging cables, and more. Use the small container with the cup storage space to organize your workspace so you can focus and do your best work. The gaming headset stand base has a hole-shaped design. A single button for easy to switch the lighting mode you like, 10 kind of multi-color flowing or single-color breathing effects penetrate from the base, and a fantastic gaming atmosphere. No driver is required for the 2usb ports and 3.5mm AUX portRGB headset stand, it supports transfer files or plug and play, no driver is required. The small size, easy to install and remove, headphone stand with a rotating bearing, which can be easily adjusted to different angles and has strong flexibility, isStylish and Simple Design. The stylish and minimalist design of your desktop provides a display of your headphones. The headset stand can be used for all size headsets. It has a balanced headpset stand to refuse entanglement, and a scratch on your headphones to keep your desktop clean. If you're tired of putting headset on the table at home, this pink headphone holder is the best choice for your PC desktop accessories, perfect gift for girlfriend, daughter-in-law, daughter, wife.
👤The light weight, cute colors and ease of use make it easy to hold my heavy headset. I use one of the twousbs for the ring light and it works great. 10/10 would recommend it.
👤I don't know if it's just me at this point, probably, but the final update is the only one I know of. Don't use a different computer to test it. Most of it worked after the seller sent me a replacement. The quality of the product isn't to blame for the base being flat. These are decent and worth the money, even though it is a bit pricey. Product is deserving of a chance. The seller gave me a new one, which I appreciated. I have to plug in the headphones after I shut down and turn on my computer, but I'm only having to do this after I'm done. I am not sure if the new stand will be different. These are pretty decent, so I'm hoping for the best. All the functions need to work correctly. There is a The stand has aux and aux ins. You have to plug in this device after you shut off your PC and turn it on again, for some reason. It looks like someone was mad and scribbled on the logo, but it doesn't look like a manufacturing problem. The device would randomly stop working. The LEDs work well. It's too nice to give it two stars for what it's worth. There is a If you're only using this as a stand, then go for something else. If you don't mind plugging in the device, you can use the aux andusb ports. This is my first stand, maybe they're all like this? I'm not sure. Maybe I got a bad product.
👤The NACODEX Headphone Stand has a headphone stand with a lighting system. There is a The lighting works even when the stand is plugged into a power strip. I have other stands that only light up when plugged into a computer. There are breathing and color modes. The stand does not remember the last color. A touch-sensitive button on the top of the base is used to change the colors. The company's logo is lit up, and for some reason it is called "AJAZZ." When I sit at my desk, I see that text the most. There is a The stand has a 3.5mm aux port on the back and twousb ports on the front. I don't use them because I power the stand through my power strip and my headphones are all wireless. There is a The stand is 412 inches by 412 inches. The footprint is small and doesn't take up a lot of space on my desk. The rubber feet on the bottom help keep it from sliding. The stand is stable. I tried to knock it over, but it stayed upright. There is a The stand can hold up to two pairs of headphones. Two pairs looks silly, but it works. There is plenty of room for big headphones in the usable height of 10 inches.
The dual Headphones Hanger under the desk can hold two headphones at the same time, with a headband width within 2.1inch. The rotating neck of the headphone arm allows it to be used as a storage option for heavy headphones. For a near universal fit on most desks, the Clamp can be as narrow as 5mm and as thick as 50mm. It is easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or table from damage. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.
👤I transitioned from a regular desk to a standing desk and I love it! There is a I bought the Anti Fatigue Bar to stand on so I can work on a stand up desk. I bought a dual stand under my desk so I can hang my headphones when not in use. It's very easy to install on a desk and it's very sturdy, but I like that it rotates so I can tuck it inside the desk rather than have it stick out. Absolutely nothing! There is a 5 out of 5 stars! If you need to hang stuff for storage, such as headphones, book bag, and anti fatigue bar, I highly recommend this. It's strong enough to hold anything. There is a Hope this was useful. If it was, please click on the button below. Thank you!
👤The design is subtle and easy to install, and thepadded hooks can be adjusted to your desk. There is a If you have a thicker desk, you won't have much clearance for your headphones. This was used for our headset. The hooks aren't adjusted to go lower than the C clamp, so it barely fits under the desk. I thought it would be bigger and longer because of the reviews. Would not be possible to fit 4 quality headphones on here. I thought my headphones wouldn't be a problem at my desk. It works. It works and is cheap, but not my favorite for the purpose I bought it for.
👤Excellent headphone holder! I use this to hang my headphones above my headphones amplifier at the back of my desk. There is a The steel is very strong. It is very easy to install. I like the way the hanger rotates. I will probably get another pair of headphones. This is the best I have found before. I bought another one to see which one I liked the best. The other is made with plastic and takes up more space than the other. I'm sending it back. This is the keeper!
👤I use it to hold two briefcases. The Bag of Holding is from ThinkGeek and the large briefcase is from Saddleback Leather. Hanging them from the device keeps them out of the way of the robot. It looks better than any other method of storage I have tried.
👤I wanted to buy a single hook for my headset. I found a dual headphone stand and extra wide brackets. I don't have enough room on my desk to hang this hook. I need something to hang from the shelf. It is about 2 inches thick. The hook is perfect on the edge. I use the extra long arm to throw my headset on there. I know where to find my headsets.
👤I was worried that this might not hold up because my desk has a metal tube on the bottom side, and I needed something that was strong enough to hold two pairs of headphones. I've had no issues. The item I received is not the same as the one pictured. There are two small tunnels on the plane of the headphone-holding areas near the edges that you can cut out if you want to get a cable grip. It's too wide to hold regular 3.5mm cords, so maybe it would hold woven cords?
It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking. The rotation is done at a certain degree. The stick headphone hanger can be applied to different positions. Can paste under a table, under a desktop, under a cabinet, and on smooth surfaces. Headphone cable organizers. The headphone hook with the headset cable organizers can be used to make your desktop more tidy. Quick install. The holder has strong double-sided tape. Please hang your headphones after 24 hours to make sure the suface is dry and oilless and to make sure the hanger is firmly stuck. The hook of the headphone holder stand is made of rubber. The leather of the headset head beam needs to be kept free of the hook. It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc.
👤I gave one as a gift. The mount comes with an extra sticky pad so you can move it to another location if you want. The material is sturdy and doesn't feel cheap. We've bumped into it a few times but it hasn't broken or anything, but the mount is most likely going to fail given the weight. The mount can be used in many different ways, and it is very versatile. I've seen other options that aren't gaming headphone stands that take desk space, and plan on buying one for myself.
👤The item cannot be placed on the underside of the desk. For a few days, the glue stays. Twice, I used up the two patches that came with the product. If the base is mounted on the top side of the desk, this item will work. This takes up space on the desk surface that I didn't want. The product did not work as pictured, even after following the mounting instructions exactly. The device will not hold the Apple AirPods Max. Don't buy.
👤I have a white desk and a light grey chair, and this is the perfect accessory for it. The design is simple and quality. If you clean the surface before applying the glue, it will cure in 24 hours and be very strong.
👤The rotation feels great, it feels like clicking every 90 degrees. It was easy to install the included glue under my desk. It's easy to set the headset on when I work because I rotate the clip out. When I'm not working, I put it back under the desk so no one accidentally bumps into it. I used to have to reach under the desk to get to it. The double-sided cord clip is great to have because it allows you to clip in a headphone cord as well. If you need a power cord. The clip is a little flimsy. When I plug the headset into the light pull, I have to pop the cord back into the cord holder, which is an extra step. I would like the cord to stay in the clip.
👤The glue is terrible. Will not hold instuction to let the glue set for 24 hours, it did not work after 2 days. Might as well drill through the base with screws. You're better off with the screw style. There was an update on 2/7/2022. I did what I suggested a couple of weeks ago and it worked. The company made contact with me after modification and offered to send me a replacement. I said no because I accomplished the above and didn't need another one. They still wanted to give me a refund and send a new design with a scew shaft. The design worked better and the original cost of the order was returned. I increased my rating from 1 to 3 stars because of their customer support. You don't hear about it a lot these days.
👤I bought two of them because I liked this. They were easy to install. I had to store my headphones on them and I had to make sure it was good. One of the holders fell about three months later. I stuck it back up after I wiped the dirt off the spot it was going on and it seems to be holding up. I will switch out the glue if it falls again. The different ways in which it is held makes it easy to remove it from the way.
Premium quality is made of aluminum metal. 60 days of money back is included in the Headset Holder Warranty. Double Headphones Hanger can hold two headphones at the same time, with a headband width within 2.1inch, such as a gaming headphone, children headphone, and so on. You can charge your smart device without a plug in wall with the 3 Port SmartUSB Charger. It can detect your device and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amps overall. The lights are RGB. The RBG Headphone Stand can display 9 colors changing effects to create an amazing game atmosphere at your preference, that can be selected by pressing a Touch switch. Great gifts for men and women. Fire-resistant and hardened plastic outer shell, build-in premium circuitry and microchip ensure device safety. A multi-protection system protects against overload, short-circuits, over-current and other charging issues. If there is a quality issue with this headphone rack, please do not purchase it.
👤It's a nice idea, but it doesn't live up to the potential. Is a decent job holding on to the desk, not sure if it will take too much weight. The lip at the top is not more than 1/2 inch. There is a flaw in theusb C port It won't register as charging my phone, but it will charge my ear bud case. I didn't return it because of that. The swap for a better power supply didn't help. It doesn't provide enough power to the port. The charging cable on the A port does not generate enough juice to quickly charge my phone. Pressing and holding the button will shut off the light.
👤I am always on the phone. It's helpful to have a place to hang my headset in my desk. There is a I like that I can charge a few devices here. There is a I don't like the fact that there is a circle of light on the front. The light is in motion. If you have this in an area where you sleep, it could keep you awake. The light show could make you sleepy. I'm not sure if it works that way, but I'm trying to see the bright side. I made a new year's resolution to be more positive.
👤There are no options for one color or different modes in the RGB lights. I don't like them but the rest of the things are very well made and I have to give it 5 stars. The hub is nice. I mounted it under my desk because it was strong enough to handle. It's under my desk to hide the mess of wires.
👤If it fell down immediately or within 20 minutes of installation, it wouldn't be possible to hold onto the table and plug in to the wall at the same time. If your space is set up just right, you're good, but other than that, good luck! I felt like the item was false in the description.
👤The convenience factor is great. The attachment screw is set up to be too close to the brackets, which is a manufacturing defect. Result: The cheap plastic cap on the end of the screw makes the device slip off with the smallest of movements, like hanging a set of headphones.
👤I own a few pairs of headphones. A mic and tooth for my phone. I think they fit on my desk. The unit is held sturdy by the clamps. It is handy to have both the 2 and 1 charging ports. The light is funky. It would be nice to have the option of turning it off, but I can set it to whatever color I want or let it spin through the various colors. I am very happy with the purchase. It gets my headphones off my desk. I highly recommend it.
👤It's a great addition to my set up and helps me keep my headphones organized. I love that the lights can be turned off and that the extra outlets are clutch. I have been using it for almost a month and it has never moved. The plastic feels cheap but I can't complain about the price.
You can get a refund within 60 days or a free replacement within 12 months if you have non-human reasons. You can contact them via Amazon Messages if you have any questions. Simple and space-saving. Their unique and stylish headphone hanger is made from solid aluminum alloy and wood to provide a stable foundation for your headphones and clear some space on your desk. TR902 is taller than other headphone stands and has a larger cable holder to keep it balanced. STABLE & ANTI SLIP. Their headset holder has a wooden cable holder at the bottom that can hold your phone in a variety of positions without scratching or damaging it. Their headphone hanger is perfect for keeping your headphones in perfect condition, whether you use it on your desk at work or at home. The convenience and company are two things. Their headset hanger is compatible with major brands including Bose, and Audio-Technica, and is 5 cm at the headband.
👤The Bose headphones are sticking to the wood and starting to peel off, despite the stand looking great. Thanks for ruining my headphones. I am not happy with the purchase.
👤I was looking for a headset stand to hold my new purchases. The stands are expensive. I kept scrolling past the stands. I came across this. I knew it was the one because it looks stunning and the reviews are great. It's no wonder why. Assembly is a no-brainer. The base and stand are part of it. Push them together! It's done! Ready to leave! It takes 2 seconds. There is a The headband rests on the curved top part of the stand. I thought it was a square. I thought I might have to modify it. It fits my headset perfectly. The edges do not dig into it. There are pictures of this curve. There is a The base is covered with a big grip. There is a The metal is beautiful. It feels strong. Excellent quality. There is a The only complaint I have is that my bamboo pieces are different shades. I'll probably be the only one to notice. I would have liked it to be matching. 5 stars would recommend anyone.
👤The shipping box was almost weightless when I picked it up. There is a The unit works well. The base is large enough to hold it up if the cord is tangled around the shaft. The thin aluminum shaft works well for the HD800 headband, but it's a bit narrow for the Audeze LCDs, and it would work better if the dip in the middle wasn't there. I ordered the Woo Audio double stand to sit by my main system, even though I have this one in the bedroom. It's not overpriced by much. I don't think I need two stands. The banana hook is too narrow for the HD800s or the Focal Clears, so I could use one of the steel strips in the suspension headband. The banana hanger worked well for the HD600s. The all-metal banana hanger is my favorite for cost effectiveness, but the hook is too narrow for headbands of more than an inch.
👤The bamboo version is reviewed. There is a I'm happy with the $25 that I paid for these. The bamboo base and top piece are very well made. The quality of the stand is excellent. It is very strong. I have a pair of HD 800 S that are heavy, and this stand doesn't flinch. The base is large and the aluminum neck is strong. There is a This is a five star stand, and it is 888-282-0465 for my Sennheiser HD 598s. If you have lighter weight headphones, what I'm about to mention won't ever apply and this gets a huge recommendation from me. If you have heavier headphones, the top piece of them can cause problems with the soft material of the headband. The bamboo is hard and the sides are sharp, so that's why it's hard. It would have been great if there was a softer material on the top piece that would allow headphones to sit on it without putting too much pressure on the band near the sides. There is a I took this down to four stars because of the creasing on my headphones. I'd give these five stars if I hadn't bought those and used my other weighted pairs. It is an attractive stand that stays in place. I got a wooden stand that looked like an Omega symbol, and I have another one. It works well for the headband, but it's hard to get headphones off. It's not as strong at the base. I'm glad I bought this, but my 800 S headphones are on the older stand until I find a solution to the creasing or something soft for that slot.
Headphone rack for multiple headsets products from Kdd. In this article about headphone rack for multiple headsets you can see why people choose the product. Jokitech and Havit are also good brands to look for when you are finding headphone rack for multiple headsets.
Kdd, Jokitech and Havit are some of the best brands that chosen by people for headphone rack for multiple headsets. Find the detail in this article. Kafri, Cozoo and Mocreo are also brands that their products are worth to check.