The standing desk has a fully tailored mouse pad. The mouse pad has a premium rubber base and is made of durable stitching. 6 pieces wall-mount robe hooks, 75mm/ 3 inch long, made ofstainless steel, are durable and strong, resisting daily scratches and keeping these hooks from corroding. The package includes 18 screws and 18 anchors, it's easy to fix the utility coat hook onto the wall. Simple and stylish towel hook is compatible with many modern designed home decoration. The wall hooks are easy to clean and can be applied in a number of places. A good helpmate for home storage and organization, this wide application is suitable for holding a wide variety of items, like coats, hats, handbags, umbrellas, towels or robes.
👤They were easy to install and feel sturdy once you finish. The base has 3 screw holes, the base cover has a peg that screws onto the threads, and the base is not including hardware. There were no instructions in the box mine. You'll want to use a drill bit that's at least.3” in diameter. Get new anchors. The included anchors are cheap and thin. I was able to successfully tap the first set with a rubber mallet, but after that? I had to pull out the messes with pliers. I ran out to my garage to complete the job. If you use larger anchors, you'll want to make sure the included screws work with them. If you have studs in your installation area, the included screws are long enough to reach them. If that is the case, you will want longer screws. There is a The finish was good. I made enough turns to hide the spots on the pegs from view because I saw them. It was made during cutting and not an indication of a composition that might cause problems. There is a If you're looking for a size frame of reference, the 3" ones were the right size to hang up my ball caps. I used one to hang an empty backpack and it was a good size. I don't know if I would use these to hang anything heavier than a couple of pounds, unless you drill into a stud.
👤I wanted a pool side towel rack that looked like it. I bought these kooks, $2 board and.50 cent paint sample from Home Depot and made what I wanted. Sturdy enough to hold wet towels.
👤I was looking for hooks that would hang long dresses from the closet. They were easy to install. I screwed the plates to the studs. I don't like anchoring and it never seems to work for me. It only took 15 minutes to get four of them assembled and four more to find the studs. Each one has about 5 dresses hanging off of them.
👤The end cap on these posts/hooks is not a solid post, and you can't see it from the photos. I bought them to install in a tiled shower for scrubbies and brushes. The edges of the cap are very sharp and are likely to cause injury. You can see that it is a thin cap that has been pressed or Glued to the base post. The bottom line. Look good, not a solid product with high potential to cause small cuts and/or abrasions.
👤These are very strong and easy to install. I used a drill with a screwdriver bit to install the cross point screwdriver. There are three screw holes in the disc. You screw the disc to the wall and then see the screws in the disc. The installation is complete and it looks great. If you screwed a row of these to a wall, you could climb up on them. Even with the pockets full of rocks, it's more than strong enough to hang your coat.
What do you think about wood hooks? Hat hooks for wall? Is there coat hooks for the wall? A coat rack on the wall? A towel hook for the bathroom? How about wall hooks for hanging things? The choice is yours. The set of wooden hooks is multi-functional, unlike metal wall pegs. It can be used as a wall hook for coats, hat hooks, and all you can imagine. They can be placed in your bathroom, bedroom, entryway and more. The L-shaped design of their wood wall hook makes it a thoughtful design. Everyone will love the design of these wall hooks. Black walnut wood is handcrafted with great value and quality. Their wooden pegs are strong and can hold heavy items. You'd be surprised at how pleasant the wood pegs are. The wood wall hooks are easy to install. The coat hooks can be mounted to the wall by beginners. It is recommended to use a drill with a small diameter.
👤These look great. I should have paid more attention to the poor quality of the mounting hardware. The screw diameter is too large for most wall anchors to hold tightly to the wall and they loosen to the point they do not secure tightly to the wall. They look nice, but they are not functional for our use. I wouldn't purchase these again. All the best.
👤These are some nice hangers. There is a I was looking for ways to hang a number of devices for easy access in the Man Cave. There were still things that needed hanging after being satisfied with other products. Something bigger than the small pegs that fall off of my hats. I tried these wall pegs. Installation was simple, but complicated by my mistake in drilling a large hole for the first one. I used one of the 50lb screw-in anchors I had laying around, which fit the supplied screw as well as the original did, to correct the problem. You drill a hole, hammer in the molly, and screw in the peg. The pegs had a rough finish around the front edge, but a quick hit with some sandpaper and some olive oil fixed that. The finish was excellent and the color is lovely. They're made of solid wood, and appear to have a natural finish, so I expect them to wear well and recover from any scratches/misuse with some furniture polish or oil. The ends are endgrain, not caps, as some similar products seem to have. They weren't perfect, but neither was my drilling, and they were well worth the low cost to obtain and low effort to install securely. They hold my hats well. I nearly gave up hope of using the two shelf supports in the space between them. They are even more attractive when they are exposed. There is a I have two pegs that are too tight for those multi-peg boards, and are in view so there is no utility hooks like in the basement or garage. I would use these in the living room if I needed to.
👤The product's anchors didn't work right. The photo on the left is of the hooks. The photo on the right is of an anchor and it worked well. The supplied anchors may have worked if my drywall was larger. The tabs on the anchor's shaft did not grab the inside of the hole, but the anchor spun around as I tried to install the hook. I used the anchor I purchased at the hardware store. I was able to install it. There is a difference between the collar and the fin at the anchor's shaft. The fins keep the anchor from spinning after it is gently tapped into the hole. The screw shown at the top of the photo was used to anchor the anchor inside the wall. The screw at the bottom needs to be removed before the hook can be put into the wall. The manufacturer should not suggest that the supplied anchors will work with no modifications. Show different photos of different methods of installation. Once installed, these hooks will work well.
The hat holder is designed to showcase your hats, not the hook. Their hooks are hidden from view when your hats are hanging. The wall hat rack uses strong 3M glue that can hold up to 3 pounds. It's important to caution. They use a strong glue to hold your hooks in place. Please place the hook on a surface that does not tear. Don't use on wallpaper or rough surfaces. Use caution on painted walls. Their hat rack for wall design is curved to keep your hats undamaged. The back of your hat is too heavy with conventional hooks or nails. Excellent hat storage solution for many types of hats, including baseball caps, snapbacks, fitted hats, visors, and flat-brim hats. Other household items that weigh under 3 pounds can be held in the hat hanger. You can arrange the hooks to create a stylish hat display. The photos in their customer reviews are inspiration. Their easy-to- install hat organizers will help you organize your room.
👤The product is supposed to keep the god forsaken hats off of the counter, desk, and TV stand. I found myself throwing my hat whenever I saw a flat, empty surface. No longer! The backside of my guest room door houses 8 hats. Every day I open it up with my own Choose Your Own Adventure game. You can use them for a wide range of items, from floppy hats to dog leashes. I don't think they're a single use item as I don't trust the glue to apply with the same consistency.
👤I love this product. These are the best solution for organizing my hats because they don't require drilling holes in the walls. They are smaller than expected, which is great for keeping a low profile. Highly recommended!
👤There was a strip with hooks. They were too close together so they were knocked off. The hooks could be hung by the back door. I love them!
👤I would have liked to receive all of the things I was promised. I didn't want to have to wait for the one missing hook to be sent to me, but it will now be an issue.
👤No, worked great for a week, never touched the hats, then fell down. They were used in the kids room and master closet. I didn't even touch the hats in the master closet, they were coming down from the weight of basic baseball hats.
👤It was perfect because they were all separate and you can play some on the wall you want. It's easy to replenish and hold a hat.
👤The 3M glue is very strong and easy to install. Works great with ball caps, but cannot hold Western hats. It's pretty deep in the description, but it does call that out. It's fair to call the product a cap holder.
👤My 16 year old grandson is a bit critical of inferior products and accepted the Modern JP Adhesive Hat Hooks for Wall (8-Pack). He had his valuable hats in his room after I bought him 2 sets. It was easy to stick up. Dr.
The controller wall mount includes wall anchors, double-sided tape, and hard plastic for long operation life. The design makes it easy to reach your headphones. It was designed by the headphone manufacturers to have minimal long term indentation on your head band. The Brainwavz Cradle has a curved bed in order to better hold your headphones without leaving marks on your head band. The same 3M VHB tape, the same glue, and long term safety are what makes it secure. If you have to move the stand after placing it please use a hair dryer to warm up the pad and then remove it from the wall. The max weight is 1.5 kilogram. It's comparable and it has a warranty. Most headphones and gaming headsets are compatible with this. To make sure their stand is compatible with your headphones, please check the dimensions of the headset bed and the width of your headband.
👤I am only leaving this review because the complete description of the product does not state it is a 3D printed piece. The picture of a smooth finish piece made me think it was a mold injected plastic piece. I received a 3D printed item. I will keep it, but not what I wanted. I have a 3D printer and can tell it is from a FDM printer. For people who are interested. Black PLA is printed at 0.2 layer height. Wall count 6 is pretty impressive. Without breaking it, I can't tell. The printer could use some tl smoothers. There is a Again, I am only leaving a one star review because I believe I was misled about the product. I would have printed my own.
👤I was assuming it would be a sort of gloss finish based on the photo on the product page. I received a pack of raw-finish-looking 3D printed headphones. It's not the most appealing look for the product, but they do their jobs well, and anything else would be better. It's easy to miss that this is not a smooth finish, even though the photos depict it. I can't recommend it since it's not all that visually appealing. I think that's important for something that used to hang and display headphones.
👤These were bought to hang two headsets on the side of a media cabinet, made of the same laminated particle board that most user-assembled furniture is made of. I stuck these into place after cleaning the surface. I left the hangers unused for a couple of days before hanging them. The backing has held up well. There is a The best thing about these cradles is that they are arched and don't cut into the padding of headphones. There is a I understand why some would not like it, as some of the reviews state, these do have a rough-cut, textured look to them. I like the look of them. I haven't looked at them since I installed them. They blend into the room as black headphones.
👤I have too many headsets. I needed a way to keep them all out of the way so I could grab them. I bought two 2-packs. There is a The plastic is strong. It is easy to put a headset on the hook and take it off again. I've seen 3M red tape used on dash cams, and it's really strong. This glue is forever. If you don't want it to ruin the finish of the furniture you stick it to, you can wait 10 minutes to remove it. It is easy to remove the leftover glue with the help of WD-40. You just have to deal with the effects of WD-40.
👤I love these. I don't know. I have 5 pairs of headphones that I have accumulated from gaming, but I have no place to put them. I found some really cool mounts for them. They're wide to accommodate thicker headbands, and the mount is larger, so it doesn't cause the foam pad to get damaged over time. They are the perfect size. My audio technicas can hold the headset up with the cable around the hook, even though most of my devices are wireless. I will definitely be investing in more of these when I move to a new place.
If you need more firmness, you can mount the headset hanger with screws or strong 3M VHB two-sided tape. Loadable 3.3lb with tape and 33lb with screws. It's suitable for any flat surface such as PC, desk legs, cabinets, shelves, wall and glass. It can be used anywhere you like. A nice combination and sufficient quantity can satisfy your different demands, and you can share them with your friends. The headphone hook is practical and light, it is a good way to tidy up your desk, it will save space, and you can use it when you're not using it. The headset holders are made of quality acrylic, which is durable and firm, not easy to break, and the black foam pad design protects your headband headphones from wear when suspended. You can give these hooks to your friends as a present, because they are universal, and they are suitable for various kinds of headphones. They are easy to install with matched quality tapes, and you can stick them to anywhere you want.
👤I can't peel the plastic 3M label, so they may have changed what's used to adhere to the wall. I can't peel the covering on my long finger nails because I have a long nail. I've given up trying to get that off. I will try to use a command strip. The whole thing is brought up when I try to remove the protective label. See the picture. I was able to get that corner to peel off when I took the picture. It's very difficult to remove the protective label. It's very sticky and has 5 stars.
👤These are exactly what you think they are and how they appear in photos. They're very simple pieces of bent plastic with a thin layer of foam in the part that contacts the headphones, but they do exactly what they're supposed to do and so far, they've held my headphones without issue. They're an inexpensive choice that aren't the most aesthetically pleasing, but they do exactly what they claim and look like they do in photos.
👤These aren't strong. The first broke. All four were broken within a week. I ordered metal to be replaced. The headsets were only held by the children but they got some rough treatment. If you use alternate glue, it may work in another home.
👤I was excited when I bought this because my headsets will no longer be laying around. The glue didn't last long. I had to stick it back onto the wall after it fell again. I had to buy the ones that came with it instead of the ones that came with target. Since then, it has not fallen. I had to buy new tape for it because I think it's not worth the money.
👤It broke after catching on something and the hook came off. It took the paint off the wall.
👤I hung these with the headphones on. They are still tight and up. Prepare for missing drywall if you want to remove them.
👤It's pretty basic but useful. Does it keep my headphones off my desk? If you own wired headphones like I do, I would recommend getting cable clips that are waterproof to avoid having to loop the headphones around.
👤It's good to hold up well so far, just make sure to follow the instructions on how to clean the surface and give the glue time to stick.
👤I didn't know how to put my first 1 on. There is a I stuck it to the wall and then realized it was a tag. There is a I have a few headsets. I have a bag for my work at the side of the desk with a laptop and other bits. I bought them and they were very tough.
👤Works great for headphones and PS5 controllers. It might be a tad expensive.
👤Basic hooks are flimsy at the bend but I hope they survive. I will update if they don't.
👤These were used for the training room at work. They are easy to fix and good value for money.
This wooden peg is easy to install. Installation with step by step instructions can be done in a few minutes. No worries for householders. The coat rack is made of natural solid wood and black metal in a round tube shape and looks stylish with a tree branch appearance. Product only comes with one unit. Use your wall space to keep your house more organized. A wall coat hook is a perfect accessory. The 3-in-1 design was used. The wall coat rack can be adjusted to one 6-hook rack, one 2-hook rack, or two 3-hook parts, depending on the space you need. There is a disorderly structure. Made of solid wood and thick steel with matted black powder coating,durable and rustproof, no worry, no matter what, with stable wall-mount accessories. The coat hook can hold up to 120 lbs. 24 hours friendly customer service and non-conditional return or refunds are what you get with wall mounted coat and hat rack organizers. Product only comes with one unit.
👤They look nice and feel sturdy. I mounted mine at my entryway. The pegs don't fit tightly, but there is enough length inside the holes for it to not fall off. A great wall piece.
👤The pegs fell off during assembly, which is a huge minus. The welding leaves a lot to be desired. Instructions and assembly are good. Great idea. Good offset from the wall. It is a workable solution for now.
👤The coat rack can be split into three sections, which is convenient for me. I used to hang hats and keys at the gate and put a section behind the door. The wood is very good and it is recommended for everyone to buy.
👤The pieces don't have the knob on the top of each one since they're meant to be one long piece.
👤The wall mount brackets are not as strong as I wanted. I might move it to a stud. I discovered that the sections are not the same when I put in wall anchors.
👤The material is easy to install and stylish.
👤It is easy to assemble, but I need someone to do this with me.
👤The posts are not easy to hang on the power pegs.
Universal mounting: The portable vehicle headrest mount player allows you to easily install the posts into your car. Everything you need for a screen cover, mount, and remote control is included. Damage-free mounting. Mount your gaming headset almost anywhere. The premium-grade headset holder uses a specialremovable glue to avoid damaging the wall. This product is ideal for people who don't want to damage their headset or wall. This stand has an extra large cradle to make sure it is compatible with larger gaming headsets. This stand has a soft-Silicone holder to protect your headset band from scratches. It's compatible with all gaming headsets, over-the- ear headphones, and on- ear headphones. TOTAL MOUNT is the leader in electronics mounting. Over 70 patents, 50,000 five-star reviews, and a long history of quality make TOTAL MOUNT a leader in its field. TOTAL MOUNT is the leader in electronics mounting. Over 70 patents, 50,000 five-star reviews, and a long history of quality make TOTAL MOUNT a leader in its field.
👤The product works as intended. I have a headset on my computer. It seems very sturdy and has no fear of falling.
👤I have a headset that most stands don't work, but this one does very well with it.
The bag has 30 cell phone pockets and 30 clear card pockets. Even kids can do it in a few seconds. You can't put things on the wall after it's been installed because you can't stick it on the wall easy to tear it off. It's easy to stick on the wall at the bedside or bathroom in the home, dorm or office, it's as wall mounted semicircle box, left box to store the cell phone, earphone, glasses,remote, key, pen, pencil, sticky. Meeting your daily needs. Modern white color and plastic materials. It can be a simple style decor if you want it to be. There are two styles, vertical or horizontal. According to various demands. The dimensions are 8.7 inch X 8.7 inch X 3.15 inch. It's a good idea to organize bedside items before sleeping and bathroom. If you don't like this bedside shelf, they will give you 100% money back.
👤Hanging my keys and holding my wallet is great.
👤Like my keys and glasses.
👤There is a hook at the back of the plastic material. It was very easy to install. I use it to hang my mail. It has been working well for me so far. I like it a lot. Thanks.
👤My daughter has a loft bed that is perfect, has not fallen or budged, and her stuff fits on it.
For a full description, please scroll down. The coat hooks are made from aluminum alloy which is sturdy enough to hold heavy items, not easy to break and can resist rust and erosion, the screws are made of iron, it can easily hold up to 40 lbs of weight. These coat hooks can be folded. Open it when you use it. You fold it when you don't use it, which saves room space. The clothes hook is 70 x 77 x 2.5 inches, the screws are 30mm long and the wall anchors are 30mm long. The coat hooks are easy to install and can be mounted directly to closets or doors. The package includes coat hooks, screws, and hollow wall anchors. The package includes coat hooks, screws, and hollow wall anchors.
👤I wish I knew before ordering these that the color is a powder coat paint and that there is enough of a gap between the wall mounted half and the hook when folded up to allow screws that aren't. The ikea bjarnum folding hooks seem to be a ripoff of lack of spacing, which makes it hard for certain kinds of mounting screws to work.
👤Great hooks. I placed an order for more because we have kids that are clumsy and don't pay attention to where they are walking and often get their clothes on hooks but not on these. We have a lot of stuff and narrow hallways so they don't stick out when we aren't using them. The kids and I hang our backpacks on them with books or laptops and have not had any loose.
👤The coat hooks are amazing. I wanted something that was strong for storage items. These are the bomb, I found them on Amazon. When not used, they fold up. I put them in a storage area, pantry and garage. They are sturdy and can be folded up when not in use. They beat standard hooks. I can't recommend this enough. It was worth every penny.
👤The price is right and they look sleek. They look better than the hooks that cost 10 times more. It's cool that they fold away.
👤The intersection of style and practicality was hit by these. If you can find the studs in your walls, these are easy to hang. It's an easy way to increase your options. A mounted coat rack is 10x classier looking and 3x more useful. Also takes up less space. I will order more as soon as I decide on the color. The black I have looks good and modern, but I think the other colors would be equally good. I've had a lot of things hanging on these that have been taken off and put back on regularly. My bag of tools, my backpack, and a heavy duffel bag are all stuff. I can't say enough good things about these hooks. Anyone who likes a modern look and is pressed for space will find value here.
👤I got four of these for my laundry room. If I'm in there, I just flip it open and hang up my clothes. I like to pull my clothes out of the dryer at a time so I don't have to iron them. The 4 of them hold a load of laundry. I don't remember if I needed longer screws for this one. I usually swap out the screws that come with them to make sure they sink into the stud. Even when I hung multiple heavy jeans and jackets, they stayed put. Hope this helps.
👤I hang my headsets on the wall board. The cheap hooks broke from the weight. These replacements are very strong for holding anything from jackets to headsets and towels. They pull down with ease if needed. Nice feature added. I think they show the keys hanging on one. A normal sized keyring won't fit over the end of these. Something to think about.
Each pocket has a dimensions of 7.4" W x 7.5" H. Even kids can do it in a few seconds. You can't stick it on the parer wall, so they suggest you put things on it 24 hours after installation for a better and longer weight-loading performance. It's easy to stick on the wall at bedside in home, student dorm, office, and it's as wall mounted rectangular drawer to store the cell phone, earphone, glasses,remote, key, pen, pencil, sticky note, etc. Meeting your daily needs. Modern white color and plastic materials. It can be a simple style decor if you want it to be. There are two styles, vertical or horizontal. According to various demands. The dimensions are 8.7 inch X 8.7 inch X 2.0 inch. It's a great way to organize bedside items and save space. If you don't like this bedside shelf, they will give you 100% money back.
👤It ripped my wall apart. I decided to change it's location after 2 weeks. It had other plans. I don't recommend this for people who aren't looking for a wall. It was sturdy and functional.
👤This is what I was looking for to hang up my speaker. I waited 24 hours before putting the speaker inside, because I used Command strips instead of the provided glue. I used four medium wall strips and it hung up well. Hopefully it will come off cleanly when I move, but I don't think there will be any problems with it falling.
👤Don't be afraid to take a chance on the warehouse deals. I received it but it looked like the box was opened. So good deal at half price. The shelf is small, but not for a lot of large items, as there are a few complaints. I was worried that it might be too big for the space I'm putting it in, but it fit perfectly. I need it to hold my phone at night when charging and have a dedicated place for my glasses that isn't haphazard and at risk of being knocked over when I try to find them blindly after my alarm goes off. It might be difficult to remove if I need to. I'm willing to take a risk to maximize my space in a NYC apartment. There is a The instructions state that you should not use it for 48 hours after installation. Hopefully this will hold up enough to hold two things.
👤I am really disappointed. I used this to store my polishes. The bottles are small. I came home and found a shelf off my wall. I would have to buy a gel set because my favorite one broke. The seller was great and worked with me, but the tape that comes with it does not work. Would not buy it again.
👤This is a good shelf. I put it with another shelf from this seller. I use them as a self care station for my toddler. The glue is strong. The seller has great customer service.
👤I wanted to give my fiancée something to use his phone for since he is the one who sleeps besides the wall. I was worried about the wall mounts falling off or being damaged by the paint, so I superglued this to a piece of wood I got from the craft store. Loving the look and function!
👤The wall shelf I received was scratched up, but it's not too bad to hang it up. This makes me wonder about the quality of the item, as a new product shouldn't look like this. I was not happy about how big the two horizontal compartments were. I can put a book on the bottom shelf, but the top shelf is too small for me to use it. It's made of two pieces of plastic, so it seems sturdy. There is a I made a big mistake when I installed the shelf onto the wall, I didn't use a level tool. The shelf was not even, with one end higher than the other. I was considering leaving it alone, but my persistent OCD made it hard for me to do so. I tugged on the shelf until it came off. I cannot recover from the four gray slashes on my wall that were caused by the white paint being torn off. The shelf is useless because the wall is destroyed and the glue is only used once. It was just great.
If you have a question about their items, just send them a message and they will help you solve the problem. You will get wooden hooks and non-marking sheets. It's nice to use on doors, closet, hallways, foyers, entryways, mudrooms, offices, garage, kitchens, and bedrooms. Quality material is hand-made beech wood. The product is safe and reliable. There is no harm to the human body. It is easy to install, just peel off the protective layer in the back and stick it on the smooth surface like ceramic tile, metal surface, glass, door etc. It's not suitable for painted wall and rough surfaces. If you stick on this surface, it is not replaceable or your wall might be broken. Better hardware, stronger and better, makes it a strong and Sturdy. There is a nice hat rack with baseball caps, winter coats,Scarves, purses, Belts, backpacks, Robe,towel. Your home gets organized. Their wood hooks match any decoration from traditional, modern, rustic, mid-century, or minimal, especially in a wood-themed room. Hard and pointed metal hooks will scratch or hurt your body, but hat hooks will not. Their wood hooks match any decoration from traditional, modern, rustic, mid-century, or minimal, especially in a wood-themed room. Hard and pointed metal hooks will scratch or hurt your body, but hat hooks will not.
👤When I tried to adjust, it took my wallpaper off as well. You can't have both strong adhesion and be able to adjust. I put them up because of the strength it takes to remove without damage.
👤I use these to hang my hats. When placing them, be careful as you can't move them after. If you do pull your drywall, you will do it again. I might have learned this lesson the hard way.
👤TP can be stored on the back of a closet door.
👤It is very easy to install.
👤I hung hats on them after applying them to my wall. Hats weigh less than 1lb. There is a The paint was pulled off the wall because they didn't adhere well to the walls. I have paint missing from my walls. Not a happy customer.
Headphone rack for wall products from Eboot. In this article about headphone rack for wall you can see why people choose the product. Naumoo and Modern Jp are also good brands to look for when you are finding headphone rack for wall.
Eboot, Naumoo and Modern Jp are some of the best brands that chosen by people for headphone rack for wall. Find the detail in this article. Brainwavz, Weewooday and X-cosrack are also brands that their products are worth to check.