It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc. Small and foldable design saves space. It can be used to free your desktop from chaos. Safe and Stable: The headphone stand has strong glue that will allow it to last a long time. The materials are high-quality. The rubber pads on the headband protect it from wear. All kinds of headphones, such as wired headphones, wireless headphones, gaming headphones, TV headphones, and so on, are suitable for the universal headset holder. It's easy to install and can be mounted anywhere. On computers, desk, and wall. Clean the surface by using wipes.
👤I was very happy with my purchase of this headphone holder, but it has been a year since I purchased it. I noticed that my headphones got in my hair when I noticed the odd goop on the bridge. The pull out bracket that my headphones rested on was the culprit. I was able to use alcohol wipes to remove all of the liquified glue and I was also able to repair the small pad that locks the brackets in the closed position with some automotive grade 3M double sided tape. Hopefully it will hold up better than what was used to assemble it. Is this the end of the world? I am going to keep an eye on it because it was a quick repair.
👤I have a charging station in my laundry room. The hug makes it look less cluttered and it gets a lot of stuff off the counter. I charge a lot of stuff on this station. The double sticky tape is used. I made it even more solid by attaching a couple screws to the holes. Unable to keep earbuds and headphones off the countertop while charging. If you don't have anything to hang on it, this is a great option. I'm very happy with the space that was cleaned up.
👤The option to screw it into your desk is what I bought this hook for. I tried the glue before I tried to put it in. I had low expectations, but the sticker is so strong that it's like a combination of Ultimate Warrior and Hulk Hogan. I'm thinking about buying another one for my towels.
👤My father built a desk for me that is solid wood. It was built for writing, not a computer. I used the glue that came with the product because I couldn't drill a hole in it. I have a very light-weight Sony headphones, but they haven't budged over a month. The hook portion is large and padded to not damage my headphones. I might put two different pairs on there. I love that when I move this desk, I can just close the hook and it won't be a problem. There is a The metal is heavy and shiny. It's a good addition to my desk. I wish it didn't have the logo, but it is perfect.
👤Unfortunately it did not last. It fell off my wall in the middle of the night, luckily it didn't break my headphones, I was sleeping. It was loud. I might use it on a wood surface with screws to hold it up instead of giving it to someone else. Holds fast to painted plaster. I've considered buying another one just for the tape. It has been on the painted plaster walls for a long time. It holds my headphones and doesn't bang when I place them down. The inside of the "hook" is made of some kind of material. It doesn't open without you meaning it to.
👤This is what it seems to be. I thought it would be bigger but it is not. I used the two screws instead of using the glue to stick to the wall. I would have been concerned that the headset wouldn't hold it's weight. There is a This looks great on the wall. When I moved my console, I realized I lost the space I wanted for the headset stand and that's when a hanging stand became optimal. This is in front of my console. It's difficult to pull it down when it's folded up, because you don't have headsets on. I think that will loosen over time with use and shouldn't be a negative.
This wooden peg is easy to install. Installation with step by step instructions can be done in a few minutes. No worries for householders. The coat rack is made of natural solid wood and black metal in a round tube shape and looks stylish with a tree branch appearance. Product only comes with one unit. Use your wall space to keep your house more organized. A wall coat hook is a perfect accessory. The 3-in-1 design was used. The wall coat rack can be adjusted to one 6-hook rack, one 2-hook rack, or two 3-hook parts, depending on the space you need. There is a disorderly structure. Made of solid wood and thick steel with matted black powder coating,durable and rustproof, no worry, no matter what, with stable wall-mount accessories. The coat hook can hold up to 120 lbs. 24 hours friendly customer service and non-conditional return or refunds are what you get with wall mounted coat and hat rack organizers. Product only comes with one unit.
👤They look nice and feel sturdy. I mounted mine at my entryway. The pegs don't fit tightly, but there is enough length inside the holes for it to not fall off. A great wall piece.
👤The pegs fell off during assembly, which is a huge minus. The welding leaves a lot to be desired. Instructions and assembly are good. Great idea. Good offset from the wall. It is a workable solution for now.
👤The coat rack can be split into three sections, which is convenient for me. I used to hang hats and keys at the gate and put a section behind the door. The wood is very good and it is recommended for everyone to buy.
👤The pieces don't have the knob on the top of each one since they're meant to be one long piece.
👤The wall mount brackets are not as strong as I wanted. I might move it to a stud. I discovered that the sections are not the same when I put in wall anchors.
👤The material is easy to install and stylish.
👤It is easy to assemble, but I need someone to do this with me.
👤The posts are not easy to hang on the power pegs.
TRRS cable is included for phone connection and class compliant. The Photo Savings Deluxe accessory bundle is a convenient way to record. See the description. Simple and space saving are included. Their stylish design features a silicone top pad and solid steel construction to provide a stable foundation for your headphones and clear some space on your desk. STABLE & ANTI SLIP. Their headset holder has a Silicone cable holder at the bottom that can hold your phone in a variety of positions without scratching or damaging it. Their headphone hanger is perfect for keeping your headphones in perfect condition, whether you use it on your desk at work or at home. The convenience and company are two things. Their headset hanger is compatible with major brands including Bose, Bose, and Audio-Technica, and is perfect for headsets measuring 4 cm at the headband and 25 cm tall.
👤The Steel Series headset was the reason I purchased this stand. It comes with an elastic band that rests perfectly with the headstand, instead of just a curved headset. One of the issues I have with this product is that the rubber mat is locked in place when squeezed on both ends. There is a I have an opinion of the over all product. There is a Adhesion: There is a place mat which is inserted into the metal frame. See the pictures. I've moved my stand a few times, and it's come apart, making a mess. The metal frame needs to fit into the rubber place mat. It was good: 4/5. The product will stand on its own once you place the frame with the mat. The product does its job. There is a The material quality was graded at 4.5 out of 5. The product is two objects. The place mat is for cables. The thick plastic mat is not cheap. There is a Overall, 3. This is a good idea for a beginner stand. You get what you pay for, it's only 20.00$. This isn't the best on the market, but it works. If you want something that requires no assembling, you may not want this. It's the same thing. Silicone pad is not a base. It's kind of flimsy, can't stand on the ground. The price is fair for what you pay for.
👤It looks like it's cheap. I don't like the flimsy silicone base and headset rest that it has. The metal stand is the only sturdy part. If the base and headset rest parts were made of plastic, I would like this stand more. I don't think it's worth $25.00. I would not be upset if this had cost me less. I was contacted to offer another product at the same price. They want to see us happy and care about their customers. I bought a bamboo stand after returning the silicone stand. There is a
👤I was looking for a perfect stand for my headphones, and this is what I found. This one is perfect and there are flaws in it. It doesn't ruin the top padded part of the headphones, and has a convenient tray for cable. If your headphones are small, the size is perfect. As soon as I opened the first stand, I bought a second one. My headphones are on the stand. The stand should be able to hold bigger headphones because the headbands are not pushed all the way in.
👤It feels cheap, but it gets the job done. The metal arm/leg, bottom Silicone cup/base and top Silicone headphone rest are in 3 pieces. There is a The pieces are made of silicone. The arm is used to support the product. Some of the base sits on a surface that isn't perfect. It doesn't seem like it will fall over. What is the biggest reason I like this product? The Silicone headphone rest is long and wide and is made of Silicone. It will fit to the headband pretty well because it has some flex to it. It distributes the weight of the headphones across a large portion of the band, rather than a small square location. Many other headphone stands can leave an impression on the headband. The stand has a large area to support it. The HD 800 S headband has the same width as the support, so it doesn't sit inside the channel, but sits on top of the silicone. The only product I can find that won't harm the headband cushion over time is this one. I have no fear that my headphones would slip off. Even with the fully extended headband, my headphones have plenty of room at the bottom. If not for the simple, yet good design and material of the headphone support itself, this product would not get a 1 or 2 star rating.
The 5 pack charge cable is relatively small and easy to carry. The ports provide the ability to charge up to 5 devices at the same time. It's perfect for a wide range of occasions, such as offices, school, home, parties, BBQs, and outdoor activities. The Magnetic Wide base allows you to hide cables and power strips and keep them neat. You can place your watch and ear bud on the stand and it is easy to charge. Fast charging and data transfer are supported by the 5 pack charging cable. Pezin & Hulin bamboo charging station stand can hold up to 7 devices and can be used as a multi-device organizer. The charging station is larger than the other and is simple and practical for multi-occasions. It is ideal for corporate meeting rooms, classrooms, restaurants, hotels and families with multiple technical devices. You get a Bamboo upgrade charging station, a 5-portusb charging station, an Integrated watch and earbuds stand, and 5 charging cables. You won't have to worry about different charging requirements for different devices with this Charging Docking Station and Organizers.
👤I got this for my husband because he has so many electronics that need to be charged up but also be organized, and it can charge up to a lot of devices, it keeps everything organized, and it has spots where you can put everything on. He loves it, it is not big or small, you can do any device. If you are looking for extra charging, extra space, and to be organized, this is a must have.
👤Another great find and a great gift. People always ask where I find the unique gifts. Rooms never have enough recepticles. It's great for home as well. All of them have a nice organizer for charging. Extension cords are no longer available.
👤The charging station is great, but it only has enough ports for 5 devices, so I had to return as I didn't know. The station and multiport charge were bought separately.
👤It is easy to set up the lathe. I like it. My phone, game system, and my IPhad are handled by it. Apple products are not always compatible with charging source. You can change out the cords for Apple approved charging cords with this product. I like it.
👤We have a lot of phones that are good, like the mega phone by Samsung and the Pro and large phone by Apple. It is smaller than expected. I will be returning to have a custom made item.
👤Every thing is charged and in one place, I don't look for my phone or computer. It's great to use it everyday.
👤Not impressed. You have to take your case off to charge them. There is a mess of wires inside the box. It's probably a good idea to send it back for a refund.
It's ideal to use it on a new version laptop, ps4, pc gaming headset, mobile phone, and Tablet, but not for apple devices. The headset stand holder is made of aluminum and premium quality plastic. The low center of gravity design provides a stable foundation for your headphones. The use of multi-Scenario use. This desktop stand is great for home, office, recording studio, bedroom or next to your computer. The curved surface design of the part of the hook where headphones are placed is made of premium plastic. The sponge of the head beam needs to be protected. The earphone hanger stand is designed according to the look of the bird. Good partner of the gaming headphones. It is wide compatible. The holder supports all sizes of headphones, such as Bose Quietcom Fort 35, Sony MDR7506/ WH-1000XM3 and the like. Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Razer gaming headphones, Audio Technica headphones, R OG gaming headsets etc.
👤I bought three of them and they are all perfect. There are no defects from manufacturing with the minimal and thoughtful packaging. There are many reasons to recommend this stand. 1) The duckbill shaped hanger is the main attraction here. Yes, the hanger is plastic, but it appears to be of high quality and has a smooth finish. The plastic up top helps maintain a lower center of gravity, as one owner pointed out. The thread on the receiver post is made of metal. Nice. There are two more The new place for headphones that use a wider leather suspension style headband cushion is the center of the hanger. If you've always wanted a design that offers this kind of support without the pronounced edges, this is the stand for you. Nice. There are 3 more The main rod is made of aluminum, and the threads on my stands are silky smooth. No need to go to Chuck Norris when assembling these. I am confident that the hardware will stay snug. I rolled the three rods across the counter and they were straight. Nice. There's not much left to be desired when it comes to the base. It does its job, but it could be a little bit heavier. The base is made of rubber and all three of my stands sit flat. I offset the weight to avoid an imprint on the cushions because I don't like having the ear cushions wrapped around the stand's rod. This stand is strong enough for the 400i. I would have to try to knock it over. I've tried, and I'm not worried. Nice. Stand is nice. I'm giving my collection to this stand. I think you will agree that it's worth it if you try it out.
👤My favorite stand right now is my headphones. I have a few other cheap ones that are similar in price but this one is my favorite. I have plenty of height for any HP I have with cables still connected, and the base has enough weight and coverage that I'm not too concerned with the stand tipping. The bicycle seat shaped rest on this one seems to be the best fit for virtually all of my headphones without messing them up and leaving behind an imprint from a pressure point or harsh edge. I have a Hifiman Sundara on top of my house, looking over its territory from above. It was easy to put together. The price is very reasonable. This is the one I will get again if I buy more.
👤It is an amazing headset stand. The package took me less than a minute to assemble, and the reviewers said it was easy to assemble. After using it for a while now, I still think it is one of the best stands out there. It looks elegant, it is sturdy, and it is the right height for any headset. The best feature of the Lamicall is that it has a curvy shape at the top, so your headband isn't damaged. If you are looking for a minimalist stand, this is it. It is simple and elegant.
It is wide compatible. The holder supports all sizes of headphones, such as Bose Quietcom Fort 35, Sony MDR7506/ WH-1000XM3 and B&O H8/ H4/. Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Razer gaming headphones, Audio-Technica headphones, ASUS ROG gaming headsets, etc. The headset stand phone stand is compatible with all phones. It can hold all types of devices, from mini tablets to most sizes of headphones. This is a desk accessory. You can save desk space by not having to keep separate stands for your phone and headphones. The headset holder headphones stand has an angle and height that is perfect for viewing. It can be lifted up to 45 and height can be adjusted. The dual headphone stand is for securing your phone and headphones. It has an anti-scratch and non-slip design to protect it from scratches. The desk organize cell phone stand is a great way to keep your desk free of wires. It has a charging slot for your phone and a cable organizers.
👤What did I not like? The product is great. It holds my cheap headphones in a nice place behind my phone, which is nice because I really don't use them that much. I have a large phone, a Google Pixel 4xl. The corner is 6.3" wide. It fits perfectly and allows me to charge it from the bottom. This feature is difficult to accommodate, but this one does it and does it well. It looks exactly like this picture. It is strong as can be. Well made! The instructions on the one page were difficult at first, but it was probably due to my attention deficit disorder. The "cord management" feature was a nice surprise, as a piece of rubber slid onto the post that the charging cord just lays into. Being surprised, the "cord management" can hold 2 cords vertically and horizontally. It was very well thought out and designed. I'm buying one for my nightstand, one for my pool table, and one for myself. Thanks for the thanks! This may sound like a fake review, but I swear it's not. The director of the military.
👤I was surprised that the stand would help my computer setup. You aren't always searching for cables because there are cable management features. The stands for the phone and headphones are designed well. I don't understand why you would buy anything else. Couldn't recommend this enough. It was well designed and the price was great.
👤The design is impressive and the product is sturdy. It's light in weight and affordable. I would recommend this item to my friends.
👤This looks good. My headphones and Note 8 are in it.
👤The phone/headphone stand is very sturdy.
👤The stand is lightweight and sturdy. It can't be used for its purpose because it came without screws.
👤Make sure you balance the weight, I like the size.
The rubber padded headphone is used. The rubber pads design of the headphone stand will make sure that leather headphones are protected from scratches. The base is made of natural marble and has a wide variety of colors and patterns. Each marble base has a unique style and taste. The beech wood supports the headphones. The smooth curve of the wood can protect your headphones from scratches. This well-designed headphone hanger is a great decoration for your home, office, studio, or wherever you use your computer. This wood stand is compatible with many headphones. Beoplay H9i, Astro A50, etc. The marble base can be assembled with the simple tools included in the hardware pack.
👤The marble and maple stand is very attractive. It holds the headset well and the shape is great for not changing the padding. The base is heavy and won't tip over. It was broken when it arrived. The base is heavy enough to break the connection between the post and holder. It was easier to fix it with wood glue. The packaging needs to be changed.
👤I would buy it again. It's easy to put together and it's weighted so that it doesn't tip over if you have heavy headphones.
👤The product is easy to assemble and looks great.
👤I love this. Adding a couple to the collection is something I'm thinking of doing.
👤Bekannte gekauft, fr deren, ist den Kopfhrer Shure Aonic 50. There is a Passt perfekt, die Auflage ist. Ich ist die kleinen Flche eingedrckt. Die Ohrpolster ist die Hrers knnen frei hngen. Sondern knnen. Ihren spektakulren Haltern, die den teuren Hrer ruinieren, ist wie manchen bldsinnig. Im Einrichtung passen Holz und Marmorfu. So an. Es ist schn, und hat unten in Moosgummipolster. Alles in allem are guter Preis-Gegenwert.
👤There is a Produkt. Leider is a person. berhaupt ist, passt die Marmor. I am gerne behalten.
👤Zu. It is called weihnachten. Geschenk bestellt. Ihren Fotos ist aus wie. Es ist gut. Weiter empfehlen!
The bag has 30 cell phone pockets and 30 clear card pockets. Even kids can do it in a few seconds. You can't put things on the wall after it's been installed because you can't stick it on the wall easy to tear it off. It's easy to stick on the wall at the bedside or bathroom in the home, dorm or office, it's as wall mounted semicircle box, left box to store the cell phone, earphone, glasses,remote, key, pen, pencil, sticky. Meeting your daily needs. Modern white color and plastic materials. It can be a simple style decor if you want it to be. There are two styles, vertical or horizontal. According to various demands. The dimensions are 8.7 inch X 8.7 inch X 3.15 inch. It's a good idea to organize bedside items before sleeping and bathroom. If you don't like this bedside shelf, they will give you 100% money back.
👤Hanging my keys and holding my wallet is great.
👤Like my keys and glasses.
👤There is a hook at the back of the plastic material. It was very easy to install. I use it to hang my mail. It has been working well for me so far. I like it a lot. Thanks.
👤My daughter has a loft bed that is perfect, has not fallen or budged, and her stuff fits on it.
You can get a refund within 60 days or a free replacement within 12 months if you have non-human reasons. You can contact them via Amazon Messages if you have any questions. Simple and space-saving. Their unique and stylish headphone hanger is made from solid aluminum alloy and wood to provide a stable foundation for your headphones and clear some space on your desk. TR902 is taller than other headphone stands and has a larger cable holder to keep it balanced. STABLE & ANTI SLIP. Their headset holder has a wooden cable holder at the bottom that can hold your phone in a variety of positions without scratching or damaging it. Their headphone hanger is perfect for keeping your headphones in perfect condition, whether you use it on your desk at work or at home. The convenience and company are two things. Their headset hanger is compatible with major brands including Bose, and Audio-Technica, and is 5 cm at the headband.
👤The Bose headphones are sticking to the wood and starting to peel off, despite the stand looking great. Thanks for ruining my headphones. I am not happy with the purchase.
👤I was looking for a headset stand to hold my new purchases. The stands are expensive. I kept scrolling past the stands. I came across this. I knew it was the one because it looks stunning and the reviews are great. It's no wonder why. Assembly is a no-brainer. The base and stand are part of it. Push them together! It's done! Ready to leave! It takes 2 seconds. There is a The headband rests on the curved top part of the stand. I thought it was a square. I thought I might have to modify it. It fits my headset perfectly. The edges do not dig into it. There are pictures of this curve. There is a The base is covered with a big grip. There is a The metal is beautiful. It feels strong. Excellent quality. There is a The only complaint I have is that my bamboo pieces are different shades. I'll probably be the only one to notice. I would have liked it to be matching. 5 stars would recommend anyone.
👤The shipping box was almost weightless when I picked it up. There is a The unit works well. The base is large enough to hold it up if the cord is tangled around the shaft. The thin aluminum shaft works well for the HD800 headband, but it's a bit narrow for the Audeze LCDs, and it would work better if the dip in the middle wasn't there. I ordered the Woo Audio double stand to sit by my main system, even though I have this one in the bedroom. It's not overpriced by much. I don't think I need two stands. The banana hook is too narrow for the HD800s or the Focal Clears, so I could use one of the steel strips in the suspension headband. The banana hanger worked well for the HD600s. The all-metal banana hanger is my favorite for cost effectiveness, but the hook is too narrow for headbands of more than an inch.
👤The bamboo version is reviewed. There is a I'm happy with the $25 that I paid for these. The bamboo base and top piece are very well made. The quality of the stand is excellent. It is very strong. I have a pair of HD 800 S that are heavy, and this stand doesn't flinch. The base is large and the aluminum neck is strong. There is a This is a five star stand, and it is 888-282-0465 for my Sennheiser HD 598s. If you have lighter weight headphones, what I'm about to mention won't ever apply and this gets a huge recommendation from me. If you have heavier headphones, the top piece of them can cause problems with the soft material of the headband. The bamboo is hard and the sides are sharp, so that's why it's hard. It would have been great if there was a softer material on the top piece that would allow headphones to sit on it without putting too much pressure on the band near the sides. There is a I took this down to four stars because of the creasing on my headphones. I'd give these five stars if I hadn't bought those and used my other weighted pairs. It is an attractive stand that stays in place. I got a wooden stand that looked like an Omega symbol, and I have another one. It works well for the headband, but it's hard to get headphones off. It's not as strong at the base. I'm glad I bought this, but my 800 S headphones are on the older stand until I find a solution to the creasing or something soft for that slot.
There are stereo/2-ch mode switches per channel. The stand is made of wood and metal. Sturdy and stable: Solid heavy base has anti-slip design. The desk should be dust free and flat when you place the headset stand on it. Superb workmanship. The finish of the headphones can be protected from scratch. The headphone stand has a stylish design. It's suitable for home, office, studio, bedroom and also for exhibition center store display. The stand is compatible with most models of headphones.
👤I don't like headphone stands that require you to put the earcups in the smallest size. This one is tall enough to leave it how it is. The wood top matches my desk and has nice sticky feet.
👤The design of the headphones allows them to rest naturally instead of forcing an open position, which is easy to put together. If you have a pair of Ollo's, you'd love this stand.
👤It doesn't feel like it will break. It works perfectly with my Steelseries Arctis headset. This thing is pretty darn awesome. It might knock itself over if you look at it wrong. I want to find something that stays in place when the bottom of this guy is being used.
👤I gave this to my husband for Christmas. It was easy to assemble, sturdy, and makes his desk look more organized. The quality is great and I feel like it's more expensive than it actually is.
👤It's pretty heavy and sturdy. It was easy to assemble, it was screwed together in two seconds. We have a lot of fake wood furniture from both Amazon and wayfair.
👤I use this to hold a large headset. It is stable and not tippy. The headset's extra wide headband can be accommodated in the top. The stand is tall enough to keep the microphone out of the desk. The wooden top matches my desktop.
👤The design is simple and effective. The head pad is protected from getting damaged by the wood saddle shape. The base is not very bright. A careless elbow will knock it down, but it is stable enough to not fall over. I would buy again.
👤The stained wood piece that the headphones rest on is curved on both top and bottom, making it more balanced and aesthetically pleasing than others, is attractive.
👤The stand is high quality and makes a great resting place. There are only a few small drawbacks to the premium, which include a lack of weightiness in the base, and the absence of a clip or other means of support for the charging cable.
👤The stand is the best because the phones hang naturally and not against it.
👤Die Lieferung ist erfolgte. The Kopfhrerstnder ist besondere, besonde Die Lackierung ist sauber. Ihren Verarbeitung des Holzes ist. Oberseite ist das sauber. Ihren scharfen Kanten, Unebenheiten und Splitter ist. The Gewinde ist leicht versenkt. Ther ist der Silikons in der Unterseite. Willen ist besten. Preis- Leistungsverhltnis!
👤Macht von der Verarbeitungsqualitt. I finde design. Habe gutes Gefhl, das Teil islange hlt. Aber ist das bleibt.
👤Durch die Bauform/Ausformung des Holz-Trgers ist das gut. Durch die groe ist es da. There is a Im Hhe des Stnders ist die erweist. Im Platz bleibt.
Customer service is great. Give it a try. You can return it within a month if you don't like it. They will send you a new one if it is faulty within a year. Universal under design allows for a near universal fit on most desks by attaching a thin, narrow, and thick piece of metal to them. It is easy to remove the Spring Clamp. The audible headphone arm swings underneath your desk for discreet and non-intrusive storage and swings back out for easy access. BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Soft rubber pads are located on both ends to protect your desk or table from damage. The under desk mount is convenient for storing. Easy installation of a springed C Clamp.
👤We needed a better solution to keep our headphones from breaking and this was our answer, it's very sturdy and feels very well made, it's even better if you have an xbox one controller, it's even more perfect. My purse is probably around 10 lbs. I'll probably order more for myself and gifts in the future. Highly recommended.
👤The hook portion can bend if you put a lot of weight on it and it is very cheap. There is a The head doesn't lock up. The clip is not tight enough to prevent desk steps that are less than a quarter of an inch from moving. You can get a Brainwavz Hengja Hanger for the same price that has better construction quality. I would've gotten a second one, but I got this instead when the page from my old order suddenly said out of stock and started directly to a screen protectors. I wouldn't buy it again. Cheap, poor construction, plastic bends, top sticks up a lot. A bad product.
👤It's easy to put my headphones out of the way. I didn't want one where you have to use glue or screws. You don't need a heavy duty one if you have light headphones. The mount has a sufficient amount of space. The desk is protected by the padded clamps. The mount has a hook so you don't lose your headphones. You can choose which direction you want to hang your headphones. The cord clip is nice, but it's stiff, so I just wrap it around the hook and grab my headphones when I need them.
👤This thing is great. I was embarrassed that I didn't think of getting this a long time ago, but I did not know it existed. Maybe it didn't. I am a recording artist and I use expensive headphones. They were not taken very well care of in the past, as they would flop around on various surfaces. The device is easy to set up and I like that the hook can be changed to hang things or not. I think it's a good deal so that I can get another one for my other cans. I recommend this to anyone who wants to protect their investment.
👤It was easy to put in place. I got this because I was sick of my headphones laying in random places. The hook is neatly underneath. The picture doesn't show it, but there is a small loop for a cord to go through so I leave my charging chord handing from there so all my cords are close together and easy to manage. You can put the headphones on the hook and swing them out of the way under your desk. I put one on the side table for my headphones.
👤I didn't expect to write a review on this. I thought I knew what I was getting. This is a cheap, easy to scratch plastic. The cable clip would be better not there. The only. The mechanism for twisting the hook into different positions is a nice thing about this. You only need to rotation from 90 degrees and 180 degrees. The hook is pretty loose and you can position it anywhere from 0 to 180. I would have given it a pass, but the junk quality means it should be a lot cheaper than other METAL items. It would be a good deal at five bucks, since I got it for twelve ninety nine. If you don't know better, maybe eight. No way in over ten. I'll probably keep it because it's not worth it with the Pandemic. It will have to do.
Headphone rack wood products from Apphome. In this article about headphone rack wood you can see why people choose the product. X-cosrack and Avantree are also good brands to look for when you are finding headphone rack wood.
Apphome, X-cosrack and Avantree are some of the best brands that chosen by people for headphone rack wood. Find the detail in this article. Pezin & Hulin, Lamicall and Wixgear are also brands that their products are worth to check.