3.5mm Headphone Jack to 2X 1/4" Mono cable provides a high quality connection between your PC and your phone. 3.5mm Headphone Jack to 2X 1/4" Mono cable provides a high quality connection between your PC and your phone. The OFC Conductor they use is made of high purity copper and has shielding to ensure high fidelity sound quality. It's great for live performances. The nylon braid protects the cable. The 3.5mm Stereo To dual Mono Jack Plug Audio cable has a nylon braid against scratching and abrasion to prolong its service life. It's time! The cable is backed up with a 12-month warranty and life time customer support.
👤The 3.5mm end of the jack is too shallow and wide and prevents it from being used with a phone case that has a 3.5mm input. If you ask me, there is a major design flaw. The Y for the 2 ends of the system is only a foot long so they won't work with external monitors unless they are touching each other. The metal ends on the TRS just fall off. You need to remove the metal from the 3.5mm end. It's impossible. I don't see a reason for designing them the way they did, why not increase the depth of the jack so it works with phone cases and put the y in the cable so the 2 ends could reach studio monitors on either side of your workstations? It would be perfect if they could do that. It's worthless as it is. The engineers dropped the ball on this one.
👤I used a bunch of these to route a few PC's to my old DJ mixture. I routed one of the sound outputs to the Logictech speakers. One PC has surround sound, but the others are not. If you need these cables for very specific reasons, you should go for it.
👤I bought this cable to practice. It was what I needed to get the job done. The cable is made well and should last a long time. There is a The tips are well made. There is a It is a great splitter and would be great for anyone.
👤I used these to patch my PCs into my mixing board. The product is very cheap. One of the cables I bought was faulty and I had to replace it. The braided cable is very stiff and will not fit on my desk. I'll probably replace these with better cables at some point.
👤It works well for devices that need a small amount of input. Solid build of NIce cable. Nice price. If you need to split a stereo signal or combine 2 mono signals to a stereo signal, this is the way to go.
👤This was the missing connection for a small community theater that wanted to route sound files through the house system. Our play was a success.
👤They work well. The previous cord has a different brand. I made a lot of noise and popped and crackled when it moved or was touched. One works as it should and has no buzzing, popping or cracking noises.
👤I use this to play back tracks for my mixer. It's well made and feels sturdy. I have had it for a few months and it has not had any issues. It was great for the price.
The Jack Y cable is designed to split a stereo into two stereos. The sound quality is clear and high-fidelity after the extension. The pitch is in order, the pitch is not biased, and the sound quality is high-fidelity. It's a great choice for a music lover. High-end materials include Pure copper gold-plated plug, no rust, no oxidation, and 128 woven mesh shell. The built-in chip can filter the interference current and the performance is better because the receptacle adopts high-density aluminum alloy interface, which does not block the shell and is not easy to fall off. It is widely compatible and can be used as a headphone adaptor, adapting one jack to two, compatible with microphone, headphones, amplifier, and karaoke equipment. Also, note: The 1/3 splitter cable can only take a stereo signal and convert it into two separate stereo outputs, it can't combine them into one input.
👤The cable works as described. I now send my acoustic mike and pick-up from my small preamplifier to two separate amplifier. I can hear myself play now that I have a punchier sound. Very happy!
👤It works well. The electronic drum kit needed more cymbals. It works perfectly and doesn't change the quality of sound. It appears to be good quality cable.
👤The stereo cable is of the highest quality and is what I needed.
👤I'm very happy to have the goods. Excellent workmanship. I don't like it.
👤I used to split the headphones out on my desktop. I don't hear pops or crackles on my monitors anymore. Good product and sound quality.
This cable is designed to split one stereo into two stereos. It's ideal for use as a headphone adaptor, it can be used as a mic jack and amplifier jack. Heavy Duty Gold-Plated Metal 20 AWG 4N Oxygen Free Copper with shielding is a great choice for studio or live performances. Also, note: The 1/3 splitter cable can only take a stereo signal and convert it into two separate stereo outputs, it's not able to combine two outputs into one input.
👤I now send my acoustic mike and pick-up from my small preamplifier to two separate amplifier. I can hear myself play now that I have a punchier sound. Very happy!
👤I was able to connect two professional speakers to an amplifier.
👤It works as it should. The product is good for money. I've bought ebay ones and they weren't very good. Would recommend.
👤I wanted to add more karaoke microphones to my girlfriend's speakers and it sounded great. Will buy again if necessary. Highly recommended.
👤It works, it sounds great, and it isn't cheap. That's all you need to know.
👤It works with two mics, but they have to be switched on. The sound won't work on the other if one is turned off.
👤Does what it is supposed to do. Two stereo headphones can be plugged into the same stereo output sockets. It seems well made and works.
👤The lead was much better than the one it replaced. Highly recommended.
👤Terrible with bad sound quality and stopped working after using it a few times. Get something better by saving your money.
👤It works well. I got the wrong one.
The gold-plated connections provide superior protection against the elements. Stereo Plug to Stereo Jack Y Splitter Cable. The cable can not combine two outputs into one input. It is fully molded and shielded to prevent interference. The gold plated connections provide better signal transmission. Relief for rubber strain. It is about 6 inch from tip to tip.
👤I tried different male plugs. The connection was shaky in all of them. I tested these with another receptacle and they worked just fine. The problem is this splitter. There is a 1.5mm gap between the plug and the sockets in my image. It's hard to remove the plug from the sockets, but it allows the plug to slide in. The right channel will crackle, but the left will come through. It's unacceptable for $10 splitter. The plug should be in the back of the sockets. If you have the cables hanging vertically, gravity pulls open the gap, which makes the issue worse. The cable can be held against gravity, but it cannot be held without slipping.
👤I needed asplitter to use two sets of cans off my new mixing board. The last company I owned was flimsy and didn't last very long. I hope this one is the last one I will ever need because it's really solid and I might buy more for other uses. Great product!
👤I needed to split the main output from my mixer to the studio monitors. It works like a champ.
👤If I had to sum my review up in one word, it would be "Reliable". This particular splitter does not distort the image of the sound no matter how loud you put the gain. This product is worth its cost because I use it for professional sound recording and monitoring. I plan to purchase more splitters in the future but I don't think I'll need to look elsewhere now that this one is doing its job well. The 1/2” to 1/2” TRS amplify the sound. It is built with thick cables that don't feel cheap and it has no distortion, no loss of image and most important, it is well built.
👤The product is the same as pictured. It was undamaged and shipped fast. My children don't have to fight over one set of head phones when messing with the piano. I'm happy! It was exactly what I needed.
👤Many of the splitters that I use frequently don't work or sound bad because my main mixer only has one inch input. This one doesn't. It works and sounds good. Applause.
👤It didn't seem like the wires were thick enough. I checked them on the meter. All were measured fine. I secured the wires with cable ties after they were installed. If they are making any noise I can't hear it. A reasonable price for an odd item.
👤The electronic drum kit needed more cymbals. It works perfectly and doesn't change the quality of sound. It appears to be a good quality product.
Also, note: The 1/3 splitter cable can only take a stereo signal and convert it into two separate stereo outputs, it can't combine them into one input. The Cable Matters 1/2 inch cable splits one stereo signal into two stereo signals. The 6.35mm cable is perfect for splitting the audio output of an amplifier, surround sound system, or mixing console into two stereo outputs. If you want to connect multiple pairs of headphones to the same device, you can use the dual TRS audio cable to duplicate a stereo signal into two. The dual female to male cable is perfect for connecting headphones, audio inputs, and other stereo sources to multiple mixing boards, consoles, or other pro audio equipment. The cost-effective 2-pack of TRS splitter cables includes an extra cable, support multiple devices or save a cable for later use on the road.
Customer service is provided. A hassle-free 18-month warranty. The Audio Jacks allow a stereo port to connect to a 3.5mm plug aux cable. Audio devices can be connected to headphones or mp3 players with a 6.35mm (1/8") sockets. The 24K gold-plated connections ensure reliability and eliminate signal loss and noise. 1/6 inch to 1/2 inch. The grip treads help with plugging and unplugging. Please let them know if you have a quality problem and they will give you a replacement or a refund.
👤What can I say about this accessory? ... What can I say? It's an accessory. It works. My music is good. There is more to say. It's pretty and shiny. I own nothing else but a nice gold color. All of them are true, but not relevant. They say a review is more useful if you actually write about the product. So... I have. It's still not useful. Go figure. Have a great day!
👤I wanted to use my Corsair headphones with my external dac and amplier that I already use for my Sennheiser headphones. This product is garbage because I needed an accessory to use the Corsair headphones with my setup. The audio is bad. The audio is perfect, I can plug in my headphones directly. I guess you get what you pay for.
👤I guess it's one out of two. These are the ones I bought to connect my headphones. The 20th one fell apart. I received them on the 18th. I was blaming the headphones for the bad sound and when I tried it in another amplifier, it came apart in 3 small pieces. The press fit appeared to come un-pressed. I think the job that QC is doing is not good. I am concerned and looking for backups because the other adapter seems to be working okay, but I am worried. I think these were cheapos. I got what I paid for.
👤The large male end and small female port were the same in this dual pack. I needed a dual pack with a male and female port and a small male and female port. The quality of the adapters I received was excellent at a great price. I returned them for the correct size and received them in 3 days. Thank you Amazon for excellent service.
👤These are garbage. I bought the 2 pack to modify my headphones for my voice over setup. I've tried a number of things, but the only thing that works is the set of headphones that have no issues in 3.5mm jacks. The 3.5mm plugs are loose. I wouldn't recommend them.
👤It was difficult to use this because the left or right side of my headphones were cut out if there was a slight movement of my cable attached to this. I switched to a Sennheiser 3.5mm to 1/4" adapter and had no issues at all, so I verified that this was the culprit. The sound issues came back after I switched back to the branded VCE adapter.
👤My pieces broke within the first few weeks of ownership. I noticed feedback on like the 3rd usage when I plugged in. I pulled it out of the jack once and realized it was an adaptor. The other one had the same thing happen a few days later.
👤The product only worked for about 30 minutes with a fender amplifier. I am giving it 4 stars because I am not sure about the sound quality, but it seems to be a decent quality compared to my local stores. I have yet to use it for more than a week or even a month so the test of time will tell me how good it is. Will update if there is a problem in the early stages of owning this accessory.
8 inch length for the headphone adapter. This cable splits the stereo into two parts. The nickel is high quality. Plug, 100% copper wire,durable design with flexible strain relief eliminates risk of damaging audio components. The cable length gives flexibility. The female mini-cable is 6.35mm to the male plug. The large Headphone Stereo plug is converted into a small one. The package has 1 x Qaoquda 6.35mm 2 male to 1 female audio cable.
👤There are two paddies. Both sides do not function and the other loses signal. Give me my money back. I spent a lot of time trying to make sure.
👤I have no problem with the cables I use for my pedals. They seem to have good quality.
👤It protrudes about 4in and is a small area to store other than that.
👤I needed a split sound for my drums and it was done.
👤Does not fit in the box. Junk. Right away, threw it away.
👤The item is great and the price is great. It was helpful.
👤I only used it once. So far, so good.
There is a pro grade bill. The professional series of split cable. A stereo signal is split into two stereos, with one stereo into one stereo and the other stereo into two stereos. The perfect sound quality can be given to you. 20 AWG 4N Oxygen Free Copper with shielding, foil shielding and metal braid shield eliminate interference, deliver pristine sound, noise shielding, No hum, no noise, crystal clear music. A high quality performance. The right size, they always fit correctly, and the 24k Gold-Plated Connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensure minimum signal loss transfer. DURABILITY. The wire is flexible and strong and has a metal housing. The braided nylon exterior makes audio cables tangle free. The ring type is a dual jack with a single stereo input and a dual stereo output.
👤I only have Canare and Mogami cables in my home studio. I'm picky about quality. I looked on Amazon and found this cable that was 20 AWG, I thought it was great, I read some reviews and saw it was 20 AWG. I decided to try it out since Amazon has free returns if I don't like it. I received the package and liked it, it was well built, and after plugging it in I was really impressed with the audio quality. I don't write reviews. I decided to do it at this time because I think this cabe is worth it if there's someone like me who doubts it.
👤I bought it for my cousin. It was sturdy and dependable when it was received. He was connecting his keyboard to his amplifier. I wasn't around when he did it. I would recommend this product to someone else after he told me how it worked and thanked me for buying it for him. The job it was supposed to do was done. It did everything it was supposed to do. I am not sure if it will last long but the material feels sturdy so I am sure it will.
👤So far, so good. I use this for my Yamaha keyboard.
👤As described! There is a Sometimes the arrangement of the rings on the cables isn't as described and the cable won't work for what you need it to do. Everything works the way it should here. The build quality of the cable seems solid, the packaging was adequate, but not excessive. Good purchase!
👤My drum set was connected to my amplifier. They had a great sound.
👤It works like it should.
There are power supplies for four head phones. Up to four pairs of headphones can be powered by the Pyle Stereo Headphone Amplifier. Four people can listen to the main mix in your studio. Independent volume controls. The dedicated output level controls allow each listener to determine their own volume level. Independent channel volume knob control for each listener. Also has a power ON indicator. 14” TRS output jacks. The headphones splitter has 4 14” stereo headphone jacks which allow you to control up to 4 headphones at the same time. The source input jack for the Pyle Pro mixer is also included. The audio quality is superb. The PHA40 has 4 high powered stereo Amps that are capable of maintaining the highest sonic quality even at maximum volume levels. The ultra-low noise operational amplifier is included for outstanding audio performance. COMPACT size is small. The professional integrated headphone receiver is easy to carry and use on the road. It's perfect for both on-stage and in- studio performances.
👤Before buying a few to try out, I read a lot of the reviews. There were a lot of people who gave the unit five stars and were completely satisfied with what they got for the low price. There were a few one-star reviews where people said that the amplifier didn't amplify the signal at all. There were also complaints that the jacks were unreliable or mis-sized and that you had to have a plug inserted into the jack to get proper stereo. There is a The very similar Behringer HA400 was also sold on Amazon.
👤When something is described as being, but does not do so, it only deserves a single star. Why? I don't understand why people give 2 or 3 stars to products that don't live up to what they're said to be. J-Sigmo says the parts are worth it. The product is not a collection of parts but a headphones amplifier. 1 star is required. The stars and not the details are what others will see if anything else is put on. A restaurant will tell you that they have all beef burgers, but you will find out they are not all beef. Do you now give 2 or 3 stars? Absolutely not. I checked it before I dismantled it for my project. I found out about it. I wanted to see how well it would run at 9 volts. I used to have a similar product from Behringer that worked fine at 9 volts, but it was removed from the power source. J-Sigmo's Dec. 2, 2015 Amazon review observations are useful. I found over 16 volts before the diode while I was checking the voltages. The wall wart power supply that I checked was 18 v, and the circuit board has a 1000mfd capacitor. The maximum rating of the 4580 chip is 18 v, but it has a 35% error. The little power indicator is now passing 70ma due to its 220ohm current limiting resistor. I am wondering what kind of quality control they have here after J-Sigmo observed that there are 470 ohm instead of 47 ohm resistors. I threw away the power and audio jacks because they were very low quality. Some people have problems with this product.
👤Not sure what the reviews are about. I tried this on my PC to get more volume out of my headphones. I have the correct plugs. I plugged it in from the PC to the amplifier. I plugged my headphones in correctly. I tried all four outs on the amplifier, and it didn't change the volume at all. What? The device gives you four audio outs from one source and a physical turn knob for the volume from it. It doesn't amplify the audio. It was tried on 3 different computers. All three results were the same. There is a It's a good device for splitting a single audio source into four, but does not amplify the audio. It's complete waste of money. It feels solid.
Also, note: The 1/3 splitter cable can only take a stereo signal and convert it into two separate stereo outputs, it's not able to combine two outputs into one input. The male and female are connected to a Y cable. It is molded and shielded to prevent interference. The nickel-Plated is 6.35mm. Plugs. The rubber strain relief is for long-term use.
👤It seems to have good strain relief. The stereo is confirmed. I use this to record. The male jack is plugged into my electric guitar amplifier. One of the female connections has headphones plugged into it. I connect a male to male cable. There is a The male to male cable is purchased separately. I use my computer to listen to audio. There is a I can use any audio mixing software to record and listen to the sound at the same time. You can create your own songs by laying down multiple tracks. There is a It sounds better than using a microphone.
👤The long and flexible tail of the Y Splitter makes it unique, as it allows the two lines to point in opposite directions. I've had splitters that used a stiff tail and solid heads. Extra stress and strain on the jack is caused by the splitter head getting pulled in one direction or the other. The life of the jack is shortened by doing so. I had to replace my audio interface because of a loose jack. The strain on the jack is lessened by using a longer tail with two heads that point in different directions. There is an update on Dec 16, 2021. One of the outputs decided to output only the left channel. It's not the headphones, since the switch to other output gives stereo, so something failed in the splitter. There is no excuse to fail like that. I dropped from 5 star to 3.
👤It splits stereo audio, but it lowers the volume a bit. If you have two sets of headphones connected to the same jack, each pair will sound quieter than the other, because they are plugged directly in to the same jack. You will have to increase the volume. This works well if that's the case.
👤It's perfect for connecting left and right audio signals.
👤This is a simple device, but if you need a mini plug, this is a great choice. No static connection.
👤Not stereo, headphones only get signal on one side.
👤The mic is able to be used with both types of microphones thanks to this adapter.
👤It's not what I thought it was. I can't use what I want.
👤I decided on this item after looking for an audio Y adapter. I have not had any issues with this item. The female connections are snug, so just double check jack(s) are inserted. I recommend this to anyone looking for an audio Y accessory.
👤The sturdy lazada I've had it for a few months. There are no issues yet. It's used almost everyday. It's a great alternative to thin flimsy splitters.
The dual quarter in the TRS to the dual quarter in the TRSF has a connection. 1/2 inch to dual 1/2 inch Stereo Splitter Cable. There is a female stereo jack and a TRS stereo plug. A speaker splitter cable is used to connect your headset to an audio device. It's not possible to combine two outputs into one input. compatible : Provide optimum signal transmission for electric guitar, amplifier, mixing console, piano, stereo system, microphones, home theater devices or audiovisual equipment. The 8 inch extension cable has a spiral shield for EMI rejection and heavy duty molded plastic to ensure a lifetime of usage.
👤The one I received was a male and tested with a multimeter. Had to return decent quality for the price.
👤Works well! It is possible to plug two synthesizer into one instrument input. I can record them at the same time now, and it doesn't affect the sound quality at all. Already ordered another!
👤It works with bass and mic, but not with 2 mics. One mic was louder than the other.
👤This is for Rocksmith. It's better to be able to hear the guitar out of the amplifier as well as have it work with the game.
👤It's not much to say. The job was done with good quality.
👤It works well. Does what I need it to do. I use it to run a guitar cable from my amplifier to one end, and a Rocksmith cable from the other. I enjoy the game more when I can hear my guitar and use my own tones. There is a The only criticism I have is that the wire is a little thin. The weight of the cables is a concern. I fear that one day it will fail if one of the wires pulls enough to connect inside the sleeve. This component could be improved for the price. I'm happy with this product.
Headphone splitter 1/4 inch products from Digitnow. In this article about headphone splitter 1/4 inch you can see why people choose the product. Ukiism and Tisino are also good brands to look for when you are finding headphone splitter 1/4 inch.
Digitnow, Ukiism and Tisino are some of the best brands that chosen by people for headphone splitter 1/4 inch. Find the detail in this article. Disino, Cable Matters and Vce are also brands that their products are worth to check.