The curve shape makes the stand more stable. Designed to protect your headphones. The Arch bridge shape allows you to put the headphones, game controller, cell phones, and mp3 player on the middle of the headset stand, so your computer desktop won't look messy. The material is made of walnuts and is smooth, comfortable, and eco-friendly. Function: The stand is designed to keep your headphones out of the way of dust and scratches. The stand is sturdy and has rubber feet on the base to keep it from sliding. There is a 2 year satisfaction guarantee forValuable gift for Christmas, Thanksgiving day, Easter, Birthday, Valentine's day and more.
👤The piece is strong. The arch is cut with a band saw and is unattractive. If you remove the base, you can use fine sandpaper to make the edge softer, but the veneer is so thin you can't see the wood in the next layer. I did not attempt to glue the base to the arch, but returned. The saw blade marks are visible on the laminated edge. The surface is smooth. I could have refinished myself. I would have liked to have kept this, except for the crude joint between the arch and base.
👤There are no complaints about this stand. The stand is elegant and has nice layers of wood and veneer. Lower your expectations on fit and finish. Some quality problems are revealed by looking closer. There is a The upper arch to support the headphones and the lower arch that stands on the desk are both screwed together from the bottom of the lower arch. The screw holes are messy. They are out of sight so there is no big deal. It surprised me. The two arch pieces meet in this location. There is a noticeable gap on each side of the joint. It is roughly cut and finished. If I had to guess, a band saw would cut these without much sanding or attempts to make the joints appear curved. The intent is to have the stand appear as a single piece of wood but these gaps and rough cuts kill the design up close.
👤The stand is sturdy. The padding on my Bose headphones became stuck to the stand. I have to throw the stand away and replace the padding on the headphones.
👤It works perfectly with my Sony MDR-Z7 phones. It looks more expensive than it is. I don't like manufacturing defects and I won't see any on this. A reviewer said that if you turn it upside down, the pilot holes for the screws that hold it together are missing. Don't turn it upside down, it's impossible to make soft plywood with a sharp angle, and you can't get any chips, so get over it. Enjoy!
👤This is a great stand for my headphones. It is an absolute beauty and looks great in any setup that I have it in. I was worried about it tipping over, but I no longer worry about that, and it helps shape my headband. I mean by that because my previous stand had a bar at the top that was stretching out my headband, but now the stand is curved, which makes it easier to fit my headband in. There is a In the humid environment of Hawaii, my headphones are going to end up sticking to the stand because of the shiny coating on them. I hope the ear pads on my headphones are not expensive. Time will tell. I would like to see a different version that was more of a matt finish. It would look better, and it would also eliminate the worry of my ear pads sticking to the coating. They're worth the money. There are a few manufacturing issues with these items, but it's not unusual.
The stand is compatible with most models of headphones. It's not easy to fit your headphones with a tray made of black walnuts and full body metal. The headphone stand is made from premium aluminum alloy. The pads at the bottom make it more stable. The headset stand combines fashion and function all in one, perfect for your office, living room, study room, bedroom, studio, etc. It's stylish appearance decorates your desk without taking up much space, and it's a safe place to store your headset when not in use. This desktop stand is compatible with most size of headphones.
👤The product arrived with dents in the base and scratches on the mount. I think it could have been packaged better. There is a Customer service is available to help.
👤It works great with the design. The stand looks great. I wish there was a place to clip my charging cord and use command strips, but they are not the best or look that clean. Otherwise, would buy again and recommend.
👤When I opened the box, I was very happy. They're nice.
👤The stand was easy to assemble and appears to be of high quality. It is easy to understand and fits in with my decor.
The convenience and company are two things. Their headset hanger is compatible with major brands including Bose, Bose, and Audio-Technica, and is 5 cm at the headband. Even the largest gaming sets can be held with ease. The mount has a surface area twice the size of the original for an incredible hold. There is a built-in cord management. The cords are secured under the desk by the stowStrap. The premium glass reinforced composite body is twice the strength of cast aluminum and has the perfect amount of friction. There is an optional screw mounting hardware. An extra 3M pad is also included.
👤Wow! How did I not notice this product sooner? There is a I own several headphones. I have spent a lot of money on stands to display the headphones. I find that some of the stands take up a lot of space on the desk counter as my workspace shrinks. I found this product through a deals website. I had no idea that there was aNCHOR PRO, but when I saw it, I thought to myself, "What a great idea." " I could have gotten the standard version for less. I decided to spend a few dollars more to get the Pro because I was interested in the cord-management feature. I'm very happy that I did. The anchor feels something. Like an anchor without the weight. It is a very good product. You can either use the 3M tape or the included screws to install the anchor pro. You can't go wrong with the tape. I was very pleased with the strength of the install. I pressed the anchor in place beneath my workspace after removing the protective cover. Before hanging your headset, it is important to let the anchor sit for 24 hours to "cure" There is a A tug at the attached anchor gives me a sense that this thing is not going away. The product is kept in place by the strong glue. The PRO version is the best for the cord management system. Two very high-quality cord managers are included. You can thread your charging or headphone cord through the clips if you unclip them. The clips have glue on them, which makes them easy to misplace. I use this for my headphones. The ANCHOR PRO keeps them in place. The cord system keeps my charging cord ready. This is an amazing product that is used and quality is excellent. Go ahead and purchase this product.
👤I did not purchase this product for headset organization. I was looking for something to hold my two lantern flashlights. I wanted a product that could be screwed under a cabinet. This product fit the bill. I put it under the cabinet in the laundry room. The flashlights are easy to see and can be charged right where they are. I did it because I didn't want to move the dryer. I wanted to be able to easily remove the hook in the future, so I didn't want to use 3M tape. The manufacturer included a drill bit for the screws. How often do you see that? Not very. There are two pads in the package for those who want to use the tape. One is on the hook and the other is the backup. If you want to, you can remove the tape from the hook, but it gets stretched out. I took it off, but realized I needed to put padding between the hook and the cabinet or my flashlight handles wouldn't clear the little wings at the end of the hook. The hook is useful for mounting my flashlight.
You will receive a figure drawing hand. The stand is made of leather to prevent scratches. Provide a stable foundation for your headphones. All sizes and brands of the headphones are compatible. It is stably on the desk. The long term for a right position while wearing headphones is ensured by the straight side surfaces. The stand's feet are designed so that you can roll up your cable discreetly to avoid the cables mixing on the table. If you have a problem or suggestion, please contact them. Your satisfaction is something they all need.
👤I am very happy with the leather covered stand I bought. It fits all of my headphones. The stand is sturdy and looks good. The stand height and stand width are taken into account when determining the ear cup width. If you have large round ear pads, the stand width may be narrow for long term storage of your headphones. The height is fine for me.
👤I own a pair of Bose Quiet Comfort noise-cancelling headphones. There is a The Bose headphones fit right on this. There is a The Kokoon's also fit. They are larger and heavier than Bose, but they are not so large that they look ridiculous on the stand. If you don't want any kind of overlap, look elsewhere. I use the stand more for the Kokoon's because they need to replenish their batteries, so I have a place to put them. I wanted a black wooden stand, but at the moment there isn't a great selection for that on Amazon, since the width is only 3-inches. There is a The quality of the stand is very good and not likely to fall over. I wasn't concerned with the fact that most headphones won't be one-handed, especially if your headphones cling to the head.
👤It's difficult to remove your HP's with one hand from the unit without snapping your ear cups together, and the Omega style of stand will compress your ear pads premature. It doesn't add to the longevity of your headphones.
👤My wife was always leaving here with expensive headphones on, begging to be stepped on while she was working from home. I had seen stands like this before and they looked like a good solution, but they were more expensive than I was willing to pay. I decided to give it a try as a Mother's Day gift after I stumbled upon it on Amazon. The Omega Walnut color is very well built and looks really nice. My wife likes it and her headphones are now safe and out of harm's way. It is recommended for anyone looking for a safe way to store their headphones.
👤The construction is attractive. The part that supports the headphones' depth is a tad over 3 inches. These are useful for smaller headphones. The "on ear" type is the largest recommended. The types around the ear would partly hang off the wood. Other models have a depth that is at least an inch deeper.
👤The item is in black leather. One foot on the stand was a bit loose after the wrong item was received. Called, returned, and received the wrong item again. It was a gift and I'm a bit annoyed. Had the correct item been sent, I think it would have been a hit. If you can find a stand that is cheaper and better, then buy it, as I don't think it's worth what you paid. I can't recommend buying it from the seller.
👤I have different styles. I use them to hold headphones. They're lovely, the wood is sturdy, good finish, and they fit all major large full size headphones without a problem. They're so cheap these days that you can't get them for less than $20, which is fine with me. Good standing.
The design of the laptop has a heat vent. The 100% aluminum alloy body diffuses heat to cool down your laptop. The dual headphones stand holder is a great place to display multi headphones, big headphones and small headphones. The dual headphone stand has double paddings which hold your headphones in balance, compatible with all kinds of headphones and gaming headsets on the market. Sturdy: The multi headphone stand holder is made of solid aluminum alloy, heavy base, solid aluminum poles, solid aluminum hanger with leather padding, even one headphone on, no wobbling, no sliding. The multi headphone rack helps to organize your desktop setup from cluttered areas, protect your headphones and stay safe from falling and scratches, suitable for: gaming, musician studios, office, workspace, home JOKItech provides a 10 years life warranty on your order. The customer service is under way.
👤I'm usually not a fan of buying products from brands I'm not familiar with, but this stand had features I wanted, and it was all metal. Once everything is tightened down, there is no play in it. Even with the bands extended for my melon-esque noggin, it has enough height with room to spare for big over the ear headphones. The base is stable enough to support heavier cans on one side, and it won't tip with both pairs on the other side. I was looking for a stand like this.
👤I needed a stand for my headphones. I had a few stands before. I think so. This one is better. It has a simple design. I needed it to be tall so it wouldn't sit on the joints and it had to have some weight for the right balance. - It took 2 minutes to put this thing together. It had everything you needed. If you only have one earphone, you can use this stand. It won't tip over. There is a large footprint to solve the balance problem. This one doesn't have balance issues and takes very little space. I tried to knock it down with my headphones on. The base has some weight. You will need heavy headphones to have a chance at knocking it down. It has a rubber orSilicon pad on top so it won't slide around. It feels sturdy and well planted. I only had to look at the best selling headphones stands on Amazon that are around $10 to see they were junk. They use too much plastic. The story of the Jokitech is completely different. Get this one if you spend the extra money. It's probably going to last a long time.
👤The stand has good weight and is functional. I had one con that kept me from giving the stand 5 stars. The bar was sharp. The rest of the bar was where the problem was, but there was a pad where the headphones rested on each side. I could see myself easily bumping that portion of the bar and causing damage. I lightly sanded the edges to correct it. I don't think it's a problem, but would be surprised if I was the only one. There is a They are heavy enough to do the job without tipping. I would buy them again.
👤I own a recording studio and have gone through a lot of headphone stands, so I consider myself to know what works and what doesn't. This one doesn't work very well. It is easy to tip over, the base should have more weight and a way to attach it to the surface it sits on. The headphones rest on a thin piece of metal. I can see it bending under the weight of headphones. The two post design that attach the base to the rest is silly and should be replaced with a heavier post that would look better and hold more weight. If I can't get this thing to stay on the mixing desk, I'll have to drill it and run screws through it to keep it from falling. I don't recommend this product.
After sales service. If you don't like the necklace, you can exchange it for a new one or get full money back. If you have a question, please contact them. The lights are RGB. There are 9 lighting effects modes, up to 16 million colors, and theRBG Headphone Stand can show an amazing gaming atmosphere. Simply pressing a Touch switch will select that. Great gifts for a man and a woman. Place your phone on a fast charging pad and you'll be good to go. No cables or interface required. It's compatible with the Apple iPhone X, Apple iPhone XS Max, Apple iPhone 8/7 Plus, and the SAMSUNG GALAXY S9/S9 Credit cards and metal will interfere with charging. Charge models can be identified. Fast wireless charge up to 10W compatible with the S10, S10 Plus, S10E, S9, S9 Plus, S8, S8 The Note 9, S7, S7 edge, S6 edge+, and 7.5W wireless charging for the phone are included. 5W standard wireless charge for all Qi-enabled phones is included. Fire-resistant and hardened plastic outer shell, build-in premium circuitry and microchip ensure device safety. A multi-protection system protects against overload, short-circuits, over-current and other charging issues. If there is a quality issue with this headphone rack or you are not happy with your purchase, please do not hesitate to contact them.
👤The headset stand is terrible and not even worth 10$, the charging port is low quality, and the lights change when you try to charge your phone. This is not worth 30 dollars. I don't like leaving reviews but I don't want you to waste your time or money.
👤Absolutely recommend this headset stand. The stand was easy to set up. The stand is very solid and feels very premium. I don't think I'll ever use wireless charging. The main reason I got this stand was for the lighting. The lighting looks great. It's the perfect amount of light. You can have all the colors or a specific color. I have two headsets that are the same, but work on different consoles. This saves me from having to figure out which headset is right for me. Stand can be plugged into a brick or surge protector with ausb ports. This stand was perfect for my needs. I adjusted the settings on my camera to make the lights look brighter because I wanted my camera to look crazy. I highly recommend it.
👤Where do I start? I like to spend more money on things with higher quality or brands that are well known. After watching a review of this product on the internet, I decided to buy it. The base acts as a wireless charging point. I was looking into a wireleless charger for my desk as well, and after reading lots of reviews on diff products saying can't charge with case, I got worried this RGB stand would have the same issue as I have an otterbox case on my Iphone 11 Pro, so It charged me with my case on. I've seen people spend a lot of money on a wireless charge and can't charge it with their case. The stand is sturdy and holds my headphones very well. This product is a great value. No need to spend more money on a brand. The lighting is not too bright or dim. It's plug n play. Since it doesn't need to send data to the PC, you don't need to worry about having enoughusbs, it can be plugged into a wall outlet. I recommend this product to anyone who is interested in a headphone stand.
👤I bought this unit just over a month ago and it works well for me, easy to assemble and sturdy enough to hold an Artemis Spectrum gaming headset. I can easily charge my Note 10 with the headset stored just by shortening it a bit, because a few people in the comments are talking about not being able to charge their phones with the headset in place. The phone has to be in the right spot to charge, which is a bit of a hassle, and the headset stand has to be placed in the right spot. If you buy a stand that doesn't seem to charge your phone, shift it around a bit to make sure it's lined up right to charge, it will charge even if you don't use it much.
The new bee stand is compatible with all sizes of headphones. The aluminum headset stand and rubber foundation are sturdy. The desk should be dust free and flat when you place the headset holder on it. This wireless headset stand is great for home, office, studio, bedroom or next to your TV. The gaming headset holder is small, light, and most important, it's a unique fashion style. Don't order it. If you have a problem or suggestion, please contact them, they will be more than happy to help.
👤The packaging was simple, sweet and complimentary. There is a It was easy to put together and works as advertised. I recommend this product if you want to display your headsets in a neat, compact way for the customer. I got two photos. This review was written again because of Amazon.
👤It's small and lightweight, but it's also very inexpensive, so for how little I paid for it, it does it's job well. There is a If you have large headphones or a cat that walks across your desk, there is a chance that your phone will tip over. There is a There is an edit. The foam on the band of my husband's headphones don't go away because of the stand pressing into it, and it has been used for about 6 months. It doesn't change the comfort of the headphones, but it makes them look worse. If you have nice headphones that you want to keep pristine, I recommend spending a little more for a curved stand because I use one for my headphones and do not have any indents. There is a If you don't care, this is a great stand that is very easy to use.
👤I bought a lot of these for storing and displaying headphones. I was pleasantly surprised by how well made these are. The wide and flexible piece on top of the headphone rests is made of TPU, which means that nothing will get scratched, and the top part of the rests is made of rubber. Some headphones have cheap foam pads up top so resting them on a thin pole or peg will usually damage them. It's not an issue with this stand. It's one of the cheapest ones. The base, post, and top are made of plastic with rubber pads. I know how good these are, so I can't imagine spending more.
👤I bought this to keep the headphones on my desk from getting thrown around. This device is very strong. There is a The unit is light and stable, even though it wouldn't stand up with headphones on. The base and stand feel like plastic and metal, respectively. The rubber top gives the headphones a good grip. There is a I am very pleased with this item. I have purchased 2 more of these.
👤There is no quality in construction. I got an $8 dollar stand after paying $8. There is a The stand can't support heavy headphones or have enough clearance for cable without causing stress to headphones. You should buy a stand that is worthy of your headphones. Is that true? The construction is cheap. The unit is assembled. The plastic that contacts the headphones bends easily. The plastic piece that is supposed to cradle the band is only three quarters of an inch in width. The stand has no width and makes an indent on the headphones. It will lead to pain. There is a The stand is too small for my headphones. I don't want my headphones to be hammed by the pressure on the cord and port. There is a Buying something else and returning.
The power adapter is required for the X and S models. Put the controller down and play games with your body, voice, and gestures. You can make calls in HD. You can play games where you are the controller. You can call friends and family with the help of the internet. Live with picture-in-picture.
👤I pulled it out of the box and watched the Kinect's shell fall apart, the bottom side was covered in double sided tape. xbox wouldn't register this device when it was plugged in. The "trouble shooting" steps did not work. I was sent a faulty product and they tried to pass it off as refurbished.
👤There is a considerable savings because I ordered the two Xbox One sensors from the same seller who was certified to sell refurbished, however they came from different places. I was willing to take a chance that it could be a little banged up, but I was expecting the sensor to be in full working order. I bought two sensors that smelled bad of cigarette smoke and the seller is likely a pawn shop that is passing off pawned/used sensors as refurbished which shouldn't be allowed. One of my sensors didn't arrive and was dead on arrival, so I returned and bought a new one, but beware, you get what you pay for, make sure your sensor works, and hopefully this third one will work as well.
👤Be careful buyer. I received the first Kinect in December, but it never turned on. I received another that did work after I returned that one. I got another one that wouldn't power on, and don't count on Amazon support to help! Completely disgusted. This was a Christmas present for my kids and they could not use it or the games we purchased for it. It's been a waste of time.
👤When buying refurbished products, one should be careful. The fan on the sensor was malfunctioning. It was disconnected from my console. Every 15 seconds, I'm talking about disconnections. I noticed that it was a common issue when I searched. I used the 90-day warranty and had it replaced. The replacement isn't here yet. It is fun. It works with me by recognizing my posture and moves. There is an update. The replacement is also faulty. This doesn't even recognize me during the game. Don't buy this product!
👤The product was in a brown box. The package was wrapped in bubblewrap. The item looks brand new. The small scratch doesn't affect the performance. It's worth it to get this over paying full price for the same product. There is a The setup has been working well. Will update if there are any issues. Assume it is a quality refurbished product and the supplier delivered.
👤I was a bit leery of buying a refurbished unit, but this one worked well out of the box. My child can play Dance Party on the Xbox without a phone or app. My child can dance with friends if the corona-viruses ever hit, because the Kinect sensor can see up to 6 players at once. I was impressed with how sensitive the recognition is, and hadn't used the Kinect before this purchase. A picture of your face will be captured instantly when you pass through the viewing area.
👤The device looks new and works as expected. Everything was packed well. Good value for money. There is a The device needs to be connected to XBox One.
It can hold 10 game disc boxes with the game disc box stroage brackets. Two charging docks can be used to charge and store 2 controllers and a gaming headset stand. It's a great way to organize and charge your gaming system at the same time. The charging dock is the best game experience. It's convenient to store your headphones so they are always in reach. It's compatible with Bose, Beats, Sony, Panasonic, and many more. Christmas gifts for men and couples. Double Headphones Hanger can hold two headphones at the same time, with a headband width within 2.1inch, such as a gaming headphone, children headphone, and so on. The extra port of the smartusbcharging allows you to charge your smart device without the need for a plug in wall. It can detect your device and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amps overall. The safe outlet power sockets are 2. You can charge your devices with this power strip. The AC Outlet has a total output of 1250W. Fire-resistant and hardened plastic outer shell, build-in premium circuitry and microchip ensure device safety. A multi-protection system protects against overload, short-circuits, over-current and other charging issues.
👤I left my home with a lot of wireless headphones. I needed a solution that was small and clean to charge more than one device. Assembly was very easy. The materials are sturdy, but could be better. The front of the unit has the ports on it, but I wish they were on the rear. It would make the unit look better and keep the same functions. It solved my headphones charging issues.
👤The product is not worth $48. The post was made of metal. The rest and base were made of plastic. There were scratches on one end of the post. The post does not fit into the base as pictured in the product image. The base was exposed. The product is not strong. The post is easy to tip over. There were no instructions in the box. The pieces came in a small box and the base was wrapped in plastic. The product is not worth the high price. I would expect a higher quality.
👤The stand is cool. I use it every day and I have a lot of noise cancelling headphones on it. The built in charging station makes it easy to manage the 'phones. The AC outlets are very convenient. The designer put a lot of thought into the function and construction of the stand. When I first looked at it, I thought it was a little pricey, but after using it, I see that it is a real deal. It is a multi-function device that makes it much easier to manage headphones. I highly recommend it.
👤It does the job and it is great having the ability to charge it, but the stand is made of plastic and weak plastic. There is a Don't force it together if you buy it. The rod will snap if there is too much pressure. It is pretty good.
👤I thought it was going to be a quality item. It's easy to put together, but not sure how long it will last. I haven't used the charging part.
👤It is nice to have power outlets. I can charge my headphones from the stand.
👤It was bought for my desk to hold my headsets. It was cheap. I had doubts when I unboxed it, but it is still holding up. It works as expected.
👤I love it! I have three headsets on.
Quality Gourmet provides a 90-Day Money Back Guarantee and a 24 month warranty that will ensure you a hassle-free purchasing experience. If there is a quality issue with this headphone rack, please contact them. A great gift is a universal headphone stand with 3 charging ports and 2 outlets. 3 port smartusb charge It is convenient to charge your smart device without a plug in wall, because it can detect your device automatically and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amp overall. You can charge your devices with this safe outlet power strip. The AC Outlet has a total output of 1250W. Fire-resistant and hardened plastic outer shell for durability, no risk of wood flammable and metal leaking, build-in premium circuitry and microchip ensure device safety. A multi-protection system protects against overload, short-circuits, over-current and other charging issues. The COZOO Headphone dock, Power Strip, and 3-Port USB Charger come with a 24 month warranty and 90-day money back guarantee. If there is a quality issue with this headphone rack, please contact them.
👤Okay. The headline speaks volumes. This is a very functional stand and it is very cool. There is a The price is correct. Good deal. The workhorse part for my personal use is the charging of my mobile phone, IPad, and Marshall and Bose headsets. My grandkids have to charge their IPads and mobile devices when they come over. All at the same time! There are minor design flaws. According to me, of course. The headband is not padded. The foam cushion will be damaged over time. The vertical stem is straight up and down. The ear cushions have to be on the stem if you place the headset on the pedestal. Over time, dents will form on your ear cushions. That's it! These are pieces of equipment that are very expensive and are sitting on this stand. In conclusion? I installed it and like how it looks, I'm keeping it. I'm using it. I'm very happy with it. See you.
👤I wanted to put a small charge station on my bedroom furniture. I stumbled onto the Cozoo stand and thought I would give it a try. The design is simple and has 3 ports. There is a large press button in the corner and a small light under the middleusb port that indicates off. I didn't think I'd use the 2 power outlets, but I've found myself connecting things there because it's convenient. The entire unit is solid and won't tip over. I am happy I found this. It works and looks great.
👤I was excited to receive this in the mail. I plugged it in to charge my phone. The ports do not hold a charge. It connects and disengages from all 3 ports. I've tried plugging the device into both a power strip and a wall outlet. The tries didn't charge my phone. I tried different cables. The outlet ports work well. They can charge my laptop with a brick. Only 5 of the ports work correctly. The stand works great if I hang my Sony or Home Theater Radio Shack headphones. If you get it for the 2 outlet ports and as a stand for headphones, I would pass it on, but if you get it for the two ports and as a stand, I would recommend it. I have to buy a seperate unit for my devices which means that I'll be using 1 outlet port to plug that into and I'll have to use more cable to deal with. I would have given it a 5 star if it had worked correctly.
👤My dad loves it! They sent me the wrong item after a bit of a mixup. I am glad I gave them a second chance. There is a The base is heavy and unlikely to tip over and spill your expensive headphones/headset on the ground. There is a The charging is spot on and can charge two phones and a headset in a few minutes. It has two outlets on the back for additional charging or if you just need an extra couple plugs for your PC. Useful! There is a The stem and rest for the headphones are thin and light, and I wish it came in more colors. The center of gravity is very low, which makes it hard to topple over, and I fear that they might snap. The top is molded plastic and you can see some of it from the process, but it shouldn't have to be trimmed with a razor. There is a The base's construction is very high quality and there is an on/off switch so it isn't drawing power. There is a The excellent base design made this product a solid B. Would definitely recommend it. They should send the right product.
You can protect your headphones by placing them on the left side of your computer monitor. This product is ideal for people who want to save desk space and protect their headphones. This stand has a soft-Silicone holder to protect your headphones, unlike other stands that have sharp edges. All over-the- ear headphones, on-ear headphones, and gaming headsets are compatible. TOTAL MOUNT is the leader in electronics mounting. Over 70 patents, 50,000 five-star reviews, and a long history of quality make TOTAL MOUNT a leader in its field.
👤If you have a curved monitor like I do, then you're better off selecting a different mount. I put the mount on the side of the shelf. It works. I wish I had picked a different item.
👤I had to remove the holder from the monitor. I had to get a knife and spend some time trying to separate the holder from the monitor without damaging either one, so I took off one star. The holder got out a bit bent and had some damaged stickers on it. I had to fit the hardware from the office in the smaller desk because I had to work from home. The headphones take too much space on the desk between them and they are great during the calls. I picked this hook only today, but it was easy to assemble, does not look flimsy, and holds headphones out of the desk. Will see how it holds after a while, but it is perfect at the moment.
👤I was going to submit photos, but the add photo button was missing. I will try to add them later. There is a This worked well for me. I use a TV screen for my monitor, with my work laptop off to the side. The cord always got in the way when I put my headphones in the drawer. My desk was too wide to have a hook on it. The "hook" on the TV was the perfect solution. The TV had no problem sticking. The mount overhangs with nothing because of how my TV was made, which means there is about a half inch of space between the raised back of the TV and the edge of the screen. It holds up my headphones just fine, so far it doesn't seem to have caused any issues. I don't worry about it falling off because the headphones are light and designed to be. This can be adjusted to work on either side of your monitor. There is a Thanks for making my desk free of stuff.
👤The main mount needs to be longer. The attachment pole part is short. If the back of the TV doesn't come to the edge, there won't be enough room for your headset to fit. There is a A dual pack, one with short attaching part and a longer one for a few dollars extra, is something this company could offer.
👤This is a great mount. It worked well for its purpose. The way the brackets are designed will conform to many shapes, and the way the strips are held tight to the back of my monitor made it very tight. The problem comes when you have to move it. Command Strips are not the same as the adhesive strips. If you pull too hard you will tear the strip. It takes quite a bit of effort to remove the brackets, and the strips can be thrown away, because you won't be able to reuse them. The vendor doesn't seem to have a way to get new ones, so I have a $12 dust collector.
Headphone stand wood hand products from Onegenug. In this article about headphone stand wood hand you can see why people choose the product. Yutao and Elevation Lab are also good brands to look for when you are finding headphone stand wood hand.
Onegenug, Yutao and Elevation Lab are some of the best brands that chosen by people for headphone stand wood hand. Find the detail in this article. Samdi, Jokitech and Kafri are also brands that their products are worth to check.