The curve shape makes the stand more stable. Designed to protect your headphones. The Arch bridge shape allows you to put the headphones, game controller, cell phones, and mp3 player on the middle of the headset stand, so your computer desktop won't look messy. The material is made of walnuts and is smooth, comfortable, and eco-friendly. Function: The stand is designed to keep your headphones out of the way of dust and scratches. The stand is sturdy and has rubber feet on the base to keep it from sliding. There is a 2 year satisfaction guarantee forValuable gift for Christmas, Thanksgiving day, Easter, Birthday, Valentine's day and more.
👤The piece is strong. The arch is cut with a band saw and is unattractive. If you remove the base, you can use fine sandpaper to make the edge softer, but the veneer is so thin you can't see the wood in the next layer. I did not attempt to glue the base to the arch, but returned. The saw blade marks are visible on the laminated edge. The surface is smooth. I could have refinished myself. I would have liked to have kept this, except for the crude joint between the arch and base.
👤There are no complaints about this stand. The stand is elegant and has nice layers of wood and veneer. Lower your expectations on fit and finish. Some quality problems are revealed by looking closer. There is a The upper arch to support the headphones and the lower arch that stands on the desk are both screwed together from the bottom of the lower arch. The screw holes are messy. They are out of sight so there is no big deal. It surprised me. The two arch pieces meet in this location. There is a noticeable gap on each side of the joint. It is roughly cut and finished. If I had to guess, a band saw would cut these without much sanding or attempts to make the joints appear curved. The intent is to have the stand appear as a single piece of wood but these gaps and rough cuts kill the design up close.
👤The stand is sturdy. The padding on my Bose headphones became stuck to the stand. I have to throw the stand away and replace the padding on the headphones.
👤It works perfectly with my Sony MDR-Z7 phones. It looks more expensive than it is. I don't like manufacturing defects and I won't see any on this. A reviewer said that if you turn it upside down, the pilot holes for the screws that hold it together are missing. Don't turn it upside down, it's impossible to make soft plywood with a sharp angle, and you can't get any chips, so get over it. Enjoy!
👤This is a great stand for my headphones. It is an absolute beauty and looks great in any setup that I have it in. I was worried about it tipping over, but I no longer worry about that, and it helps shape my headband. I mean by that because my previous stand had a bar at the top that was stretching out my headband, but now the stand is curved, which makes it easier to fit my headband in. There is a In the humid environment of Hawaii, my headphones are going to end up sticking to the stand because of the shiny coating on them. I hope the ear pads on my headphones are not expensive. Time will tell. I would like to see a different version that was more of a matt finish. It would look better, and it would also eliminate the worry of my ear pads sticking to the coating. They're worth the money. There are a few manufacturing issues with these items, but it's not unusual.
Oakywood Headphone Stand & Wireless Charging Station is made of real wood. It is a handcrafted product. It was made in Europe. Fast charging with modern 15 W technology. You will be able to charge the phone in less than 3 hours. It works with most cases up to 4mm thick. There are notifications forCERFIFICATIONS. The slim wooden charging device is certified. Your phone won't overheated because of advanced temperature control. COMPATIBILITY: This product can be used with all Qi-enabled devices. Your device will work perfectly with it. The charger and hanger are unique and elegant. They are both minimalist and suite. The headphones look great when hung on.
It's ideal to use it on a new version laptop, ps4, pc gaming headset, mobile phone, and Tablet, but not for apple devices. The headset stand holder is made of aluminum and premium quality plastic. The low center of gravity design provides a stable foundation for your headphones. The use of multi-Scenario use. This desktop stand is great for home, office, recording studio, bedroom or next to your computer. The curved surface design of the part of the hook where headphones are placed is made of premium plastic. The sponge of the head beam needs to be protected. The earphone hanger stand is designed according to the look of the bird. Good partner of the gaming headphones. It is wide compatible. The holder supports all sizes of headphones, such as Bose Quietcom Fort 35, Sony MDR7506/ WH-1000XM3 and the like. Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Razer gaming headphones, Audio Technica headphones, R OG gaming headsets etc.
👤I bought three of them and they are all perfect. There are no defects from manufacturing with the minimal and thoughtful packaging. There are many reasons to recommend this stand. 1) The duckbill shaped hanger is the main attraction here. Yes, the hanger is plastic, but it appears to be of high quality and has a smooth finish. The plastic up top helps maintain a lower center of gravity, as one owner pointed out. The thread on the receiver post is made of metal. Nice. There are two more The new place for headphones that use a wider leather suspension style headband cushion is the center of the hanger. If you've always wanted a design that offers this kind of support without the pronounced edges, this is the stand for you. Nice. There are 3 more The main rod is made of aluminum, and the threads on my stands are silky smooth. No need to go to Chuck Norris when assembling these. I am confident that the hardware will stay snug. I rolled the three rods across the counter and they were straight. Nice. There's not much left to be desired when it comes to the base. It does its job, but it could be a little bit heavier. The base is made of rubber and all three of my stands sit flat. I offset the weight to avoid an imprint on the cushions because I don't like having the ear cushions wrapped around the stand's rod. This stand is strong enough for the 400i. I would have to try to knock it over. I've tried, and I'm not worried. Nice. Stand is nice. I'm giving my collection to this stand. I think you will agree that it's worth it if you try it out.
👤My favorite stand right now is my headphones. I have a few other cheap ones that are similar in price but this one is my favorite. I have plenty of height for any HP I have with cables still connected, and the base has enough weight and coverage that I'm not too concerned with the stand tipping. The bicycle seat shaped rest on this one seems to be the best fit for virtually all of my headphones without messing them up and leaving behind an imprint from a pressure point or harsh edge. I have a Hifiman Sundara on top of my house, looking over its territory from above. It was easy to put together. The price is very reasonable. This is the one I will get again if I buy more.
👤It is an amazing headset stand. The package took me less than a minute to assemble, and the reviewers said it was easy to assemble. After using it for a while now, I still think it is one of the best stands out there. It looks elegant, it is sturdy, and it is the right height for any headset. The best feature of the Lamicall is that it has a curvy shape at the top, so your headband isn't damaged. If you are looking for a minimalist stand, this is it. It is simple and elegant.
There is an optional screw mounting hardware. An extra 3M pad is also included. The foundation for your headphones is made from solid wood. Give your headphones a stylish resting place and keep your workspace clean and organized. It fits most headphones with a headband width of 1.57 cm and device height of 9.84 cm. It's a unique decoration for home, office, studio, bedroom or next to your TV because of its environment friendly nature. The curve shape makes the stand more stable. Designed to protect your headphones.
👤I am very happy with the leather covered stand I bought. It fits all of my headphones. The stand is sturdy and looks good. The stand height and stand width are taken into account when determining the ear cup width. If you have large round ear pads, the stand width may be narrow for long term storage of your headphones. The height is fine for me.
👤I own a pair of Bose Quiet Comfort noise-cancelling headphones. There is a The Bose headphones fit right on this. There is a The Kokoon's also fit. They are larger and heavier than Bose, but they are not so large that they look ridiculous on the stand. If you don't want any kind of overlap, look elsewhere. I use the stand more for the Kokoon's because they need to replenish their batteries, so I have a place to put them. I wanted a black wooden stand, but at the moment there isn't a great selection for that on Amazon, since the width is only 3-inches. There is a The quality of the stand is very good and not likely to fall over. I wasn't concerned with the fact that most headphones won't be one-handed, especially if your headphones cling to the head.
👤It's difficult to remove your HP's with one hand from the unit without snapping your ear cups together, and the Omega style of stand will compress your ear pads premature. It doesn't add to the longevity of your headphones.
👤My wife was always leaving here with expensive headphones on, begging to be stepped on while she was working from home. I had seen stands like this before and they looked like a good solution, but they were more expensive than I was willing to pay. I decided to give it a try as a Mother's Day gift after I stumbled upon it on Amazon. The Omega Walnut color is very well built and looks really nice. My wife likes it and her headphones are now safe and out of harm's way. It is recommended for anyone looking for a safe way to store their headphones.
👤The construction is attractive. The part that supports the headphones' depth is a tad over 3 inches. These are useful for smaller headphones. The "on ear" type is the largest recommended. The types around the ear would partly hang off the wood. Other models have a depth that is at least an inch deeper.
👤The item is in black leather. One foot on the stand was a bit loose after the wrong item was received. Called, returned, and received the wrong item again. It was a gift and I'm a bit annoyed. Had the correct item been sent, I think it would have been a hit. If you can find a stand that is cheaper and better, then buy it, as I don't think it's worth what you paid. I can't recommend buying it from the seller.
👤I have different styles. I use them to hold headphones. They're lovely, the wood is sturdy, good finish, and they fit all major large full size headphones without a problem. They're so cheap these days that you can't get them for less than $20, which is fine with me. Good standing.
Simple, yet effective. The wireless headphone stand is a must have for any audio engineer or DJ. Any serious music system will benefit from this headset hanger. It's not easy to fit your headphones with a tray made of black walnuts and full body metal. The headphone stand is made from premium aluminum alloy. The pads at the bottom make it more stable. The headset stand combines fashion and function all in one, perfect for your office, living room, study room, bedroom, studio, etc. It's stylish appearance decorates your desk without taking up much space, and it's a safe place to store your headset when not in use. This desktop stand is compatible with most size of headphones.
👤Solid, heavy base, handsome, and tall-enough for work headsets is a plus.
This desktop stand is compatible with most size of headphones. Bamboo brackets are made of aluminum alloy. It is easy to store and save space.
1 year of free USA based customer service. Questions or concerns? They are here and happy to help. The Headset Stand holder is made of sturdy and elegant material. The base is 4.3 inches wide and the headphone holder is about 10 inches high. The Wood dual headphones stand is a low center of gravity design and can hold 2 headphones at the same time, no need to worry about finding a place to put your headphones. The dual wooden desktop headset stand is compatible with most headsets and is especially suitable for large gaming headsets like Bose/Sony/Beats/ ATH/Senheiser/Gradolabs/AKG/JBL/Philips/Westone. It is possible to put the elegantWalnut Wood Headphone holder in the home, office, school, recording studio, bedroom, study or game room. This is a high-quality headphone holder. The Headphone Stand Wood package includes a wood Headset Stand, 2 screws, and a wrench. Please watch the video to learn how to use the headset stand holder better. Please contact them if you have any questions.
👤I was looking for a few rare features in a stand for headphones, and I think I have found them with this stand. I needed something that held a large headphones and would support them by the metal band, rather than the leather head strap. I was a bit worried about the stability of the stand, but I haven't noticed any issues so far.
👤It's very sleek and elegant. The headband and rod holder are of the highest quality and don't bend even the most heavy loads. The base of this stand is not quality. The entire assembly is only around 200 grams in weight, with the base around 150g. If you put your headphones towards the end of the wood, it will topple over, even with the lightest of headphones. There is a It's a shame because this stand could easily accommodate two headphones if the base was weighted, but in it's current form, even my HD650s need to be placed right over the base to balance it. If I try and put a ZMF or other 400g+ headphones in the same place as the stand, it becomes very unstable, unless I can get the table to move enough to unsettle the stand. I replaced the base with a steel plate from an old helping hands and made the stand a lot more "premium" due to the heavier feel of the stand.
👤As long as you're careful, this looks great. I took my headphones off. It fell from my side table to my couch. The part that holds the headphones fell off when it hit the floor. There's a small metal piece that fits into the wood. I was able to glue it in with gorilla glue and it seems more sturdy now. They should have spent the extra money at the factory. I'm not sure why they didn't. It works great for my Emotiva Airmotiv GR1 headphones.
👤This stand is a great value for money. There is a It's well built for the price point and it can fit two large pairs of over- ear headphones at the same time. It's got a dense, solid metal base instead of the light plastic ones found on most similarly priced headphones stands. There is a It's also easy to assemble. There are 2 Allen screws attached and a key to put it together. There is a The only issue here is that properly heavy cans can tip it over if placed alone right on the edge, but this is not an issue by using just the most basic of common sense, or by simply placing some kind of additional weight.
👤This holder works with Bose headphones. It is easy to assemble. I liked the combination of colors. It doesn't take much space and leaves your desk looking clean. I would definitely recommend it.
👤It's easy to store my Hifiman and Sony cans. The metal frame of the Sundara has more clearance than the faux leather headband and the wired connections are off the ground. It's not easy to find a stand that can handle that. Solid build. It is elegant. I was pleased with this after looking on the Internet.
The stand is made of wood and metal. Sturdy and stable: Solid heavy base has anti-slip design. The desk should be dust free and flat when you place the headset stand on it. Superb workmanship. The finish of the headphones can be protected from scratch. The headphone stand has a stylish design. It's suitable for home, office, studio, bedroom and also for exhibition center store display. The stand is compatible with most models of headphones.
👤The factors that are being asked to rate this item are not understandable. It is a stand to hold your headphones while they charge or to keep them out of the way. It is easy to use and it looks nice.
👤The materials are premium and it's easy to build together. It looks great with my desk.
👤It did the job, made very well, priced right.
👤The base is sturdy and of good quality, the wooden top is just laid on top of the rod and it spins around.
👤Happy with the purchase. The top wooden piece is not permanently connected but it is on my desk and I enjoy it.
👤The stand is of the highest quality. It is easy to use. Highly recommended!
👤It is cute. It is easy to assemble and stable.
👤Weien Schreibtisch ist gut. The Over Ear Halterung is used. Zusammenbau ist das Ding quietscht, und ist aus wie kostet.
👤Bonnes finitions, est un part de la zone supportant le casque tourne. C'est dommage car, et. Vous pouvoir a bte. A voir
👤Parkstation fr den Airpods Max, Ein wenig berteuert. Gnstigere Alternativen ist es bestimmt.
👤Jardin un audio, quand mme un peu cher pour ce, c'est!
The COZOO Headphone dock is a 5-port, 5ft, 1.5m Integrated Power Cord and has a 30-day money back guarantee. If there is a quality issue with this headphone rack, please contact them. The headphone stand is made of solid wood and has a support tray. The more comfortable the tray holder is, the more you will use it. No worries about a metal scratch to your heaphone. The headphone holder has three fast charging ports, which can charge your device faster, and also allow you to charge 3 electronic devices at the same time. It saves you time. The Headphone dock has two phone slots and two AC outlets, which can charge your devices. A metal rod is connected to the black base and walnut top. The headset stand holder height can be adjusted. Birthday, Thanksgiving, Christmas, New Year, Anniversary, or other festival gifts are great for your families and friends. If you are not happy with the quality of the care you received for theusb headset stand holder, please contact them.
👤The headset stand is easy to set up, and the slots are nice to hold a phone or tablets.
Graduation gifts are original and needful. Gifts For Him, For Her, Gifts For Boyfriend, Gifts For Girlfriend, Gifts For Men, Christmas Gift, Birthday, etc. The gift box is made of recycled materials. Universal Studios. The headset holder is designed to fit larger headphones without stretching the headband. The holders have extra support. NEAT AND TIDY. This stylish headphone stand has a unique arch bridge shape, so you can hang your headphones on it. It is a stable foundation for your headphones. The wooden base has four EVA stickers on it to keep the headphones from sliding on your desk. The headphone mount is made of artificial leather and a wooden base, and it adds an elegant touch to any room or studio. Every product looks unique because of the unique wooden grain on the base. Simple, yet effective. The wireless headphone stand is a must have for any audio engineer or DJ. Any serious music system will benefit from this headset hanger.
👤I wanted it to work out. It is a nice stand. I tried to get rid of the smell, but couldn't. As beautiful as the stand is, it is on my desktop, and the stink is unavoidable as I work.
👤It works well with my headphones.
👤A very good score... It was excellant... Well built and beautiful. Would recommend. The headphones are a bit large, but not for small space.
👤It looks amazing on my desk.
👤Looks great. It's used for headphones.
👤I couldn't be happier. Nice little device. It holds my headphones with a little style.
👤The shape looks nice.
👤Nos ha sorprendido, el soporte es una auténtica maravilla. There is a El cuero es una calidad. La madera tiene un acabado that is pulido. There is a It is a sin dudar.
👤I punti di vista is un prodotto.
You can get a refund within 60 days or a free replacement within 12 months if you have non-human reasons. You can contact them via Amazon Messages if you have any questions. Simple and space-saving. Their unique and stylish headphone hanger is made from solid aluminum alloy and wood to provide a stable foundation for your headphones and clear some space on your desk. TR902 is taller than other headphone stands and has a larger cable holder to keep it balanced. STABLE & ANTI SLIP. Their headset holder has a wooden cable holder at the bottom that can hold your phone in a variety of positions without scratching or damaging it. Their headphone hanger is perfect for keeping your headphones in perfect condition, whether you use it on your desk at work or at home. The convenience and company are two things. Their headset hanger is compatible with major brands including Bose, and Audio-Technica, and is 5 cm at the headband.
👤The Bose headphones are sticking to the wood and starting to peel off, despite the stand looking great. Thanks for ruining my headphones. I am not happy with the purchase.
👤I was looking for a headset stand to hold my new purchases. The stands are expensive. I kept scrolling past the stands. I came across this. I knew it was the one because it looks stunning and the reviews are great. It's no wonder why. Assembly is a no-brainer. The base and stand are part of it. Push them together! It's done! Ready to leave! It takes 2 seconds. There is a The headband rests on the curved top part of the stand. I thought it was a square. I thought I might have to modify it. It fits my headset perfectly. The edges do not dig into it. There are pictures of this curve. There is a The base is covered with a big grip. There is a The metal is beautiful. It feels strong. Excellent quality. There is a The only complaint I have is that my bamboo pieces are different shades. I'll probably be the only one to notice. I would have liked it to be matching. 5 stars would recommend anyone.
👤The shipping box was almost weightless when I picked it up. There is a The unit works well. The base is large enough to hold it up if the cord is tangled around the shaft. The thin aluminum shaft works well for the HD800 headband, but it's a bit narrow for the Audeze LCDs, and it would work better if the dip in the middle wasn't there. I ordered the Woo Audio double stand to sit by my main system, even though I have this one in the bedroom. It's not overpriced by much. I don't think I need two stands. The banana hook is too narrow for the HD800s or the Focal Clears, so I could use one of the steel strips in the suspension headband. The banana hanger worked well for the HD600s. The all-metal banana hanger is my favorite for cost effectiveness, but the hook is too narrow for headbands of more than an inch.
👤The bamboo version is reviewed. There is a I'm happy with the $25 that I paid for these. The bamboo base and top piece are very well made. The quality of the stand is excellent. It is very strong. I have a pair of HD 800 S that are heavy, and this stand doesn't flinch. The base is large and the aluminum neck is strong. There is a This is a five star stand, and it is 888-282-0465 for my Sennheiser HD 598s. If you have lighter weight headphones, what I'm about to mention won't ever apply and this gets a huge recommendation from me. If you have heavier headphones, the top piece of them can cause problems with the soft material of the headband. The bamboo is hard and the sides are sharp, so that's why it's hard. It would have been great if there was a softer material on the top piece that would allow headphones to sit on it without putting too much pressure on the band near the sides. There is a I took this down to four stars because of the creasing on my headphones. I'd give these five stars if I hadn't bought those and used my other weighted pairs. It is an attractive stand that stays in place. I got a wooden stand that looked like an Omega symbol, and I have another one. It works well for the headband, but it's hard to get headphones off. It's not as strong at the base. I'm glad I bought this, but my 800 S headphones are on the older stand until I find a solution to the creasing or something soft for that slot.
Headphone stand wood walnut products from Onegenug. In this article about headphone stand wood walnut you can see why people choose the product. Oakywood and Lamicall are also good brands to look for when you are finding headphone stand wood walnut.
Onegenug, Oakywood and Lamicall are some of the best brands that chosen by people for headphone stand wood walnut. Find the detail in this article. Samdi, Yutao and Sikai Case are also brands that their products are worth to check.