The true reality of the sound quality is ensured by the hand welding of this Class A single-ended vacuum tube amplifier. This version has a headphone output that is compatible with all kinds of headphones. There is a switch on the front panel. You should connect your speakers to 8 and 0 posts. This amplifier uses transformer parallel output to reduce its internal resistance and improve its power. The antimagnetic transformer covers can be used to achieve a lower static noise. Its sound output is very good. The bass part is powerful and sweet. Its sound output is very good. The bass part is powerful and sweet. It has a nice appearance. The VU meters and vacuum tubes make it more attractive.
👤Wait. The amplifier and sound is amazing, but still has a 5 star review. Okay. Let me explain. I don't consider myself a hard core audiophile who can tell the difference between 192Khz and I have purchased my first audiophile setup from Amazon. My setup consists of a high quality streaming set. The balanced outputs of the M300 are fed into a sub. I found this in the trash room. I use the Nobsound 6P1 amplifier and the Audio Technica ATH-M50x to drive my speakers. I bought all of this gear on Amazon, including an expensive array of balanced/unbalanced audio cables and speaker cables. I don't have a room for this gear in my apartment so I have this setup in my cube. My first impressions were very impressive. I start hearing things I have never heard before. The bass was very deep. The soundstage is the widest and separation the most. Oh my god. The vocals are very rich. My hair stood up and I felt a tear in my eye when I heard her rendition of "Can't Help Falling In Love". The music makes you feel different. Into a different state. You sit in your chair, close your eyes and listen to the music. As you become one with the music, your emotions are stirred. You will start feeling something you have never felt before when you listen to John Coltrain's quirky jazz track and "Morning Noon and Night in Vienna". Until that moment of silence. There was a noticeable amount of background noise when listening to the amplifier. I thought that was the charm of the valve. I wanted to give the unit a chance to break. I ignored the noise. The little clicks and pops on the left channel began. It was getting in the way of my experience, so I tried to ignore it. I tried to reseat all the tubes but they were not able to. I inspected the 6H8C tubes after removing one of them. The construction of the tubes was not good. The glass envelope swayed when I rolled them around. There is a What did I do about it? Return the system and complain to Amazon about it. No! Any sane person would do that. I rolled the tubes. The stock Chinese 6P1 tubes were replaced with Russian NOS 6P1P-EB's. I replaced the stock Chinese 6H8C's with a pair of matching Psvane UK6SN7's. The burn in period for the Psvane 6SN7 valves is about 300 hours, so I was a little worried about that, but I will try to enjoy the setup during the burn in period. There is a What is in God's name? There is absolutely no background noise. Dead quiet. There is a pin drop from another parallel universe. The Russian 6P1P-EB's and the Chinese Psvane UK6SN7's became even more amazing because of what I thought was super awesome sounding. There is a It will be even better when the Audio Bloom threshold is crossed when the tubes finally break in. I apologize for the wordiest of all reviews, but I am very excited about this setup. Excellent sound and build quality! A lot of people think that Chinese products are not as good. The stereotype was smashed by the Nobsound 6P1. ! There was an update on 11/14/2019. There is a I replaced the stock 6P1's with Russian 6P1P-EB's and the stock 6H8C's with Psvane UK6SN7's. They finally got in! Oh my god. It sounds even better! It drives with no distortion no matter how loud I crank it. The Audio-Technica ATH-M50x is insane. There was no distortion. My ears are starting to hurt, the only problem is now. I can not blow out my headphones. There is a The wait is worth it when the tubes break. The setup was a bit moody during the period, but it did pay off. Some days the bass is distorted, some days it sounds flat. The setup would shine the next day. The experience is almost better than sex once the tubes are fully run in. You and I will be when the audio bloom happens. I have never experienced anything like that before.
Multiple audio input methods, it supports multiple audio input methods from various devices like iPod, Phone, MP3, TV, DVD players, laptop, desktop computer or other streaming media players. It's a nice vacuum Headphone tube preamplifier that's exclusive to customers who pursue Hifi sound! Tube T8 can be used as a headphone amplifier, can enjoy high-quality music at any time,RCA/ 3.5mm headphone output(With priority),RCA output to the powered speaker,amplifier & passive speaker,Headphone output is suitable for 16300 headphones QCC3031 is a wireless communication device that supports the following:APT-X,APT-X LL,Signal transmission faster and stable,let your enjoy the HiFi sound! 6N3 tube vacuum design can be used for easy replacement.
👤I was trying to decide between the Aiyima T8 and the Douk P1, but this one won me over because of the remote control and optical in. This is replacing an SMSL. That's going to my garage. I needed a versatile, inexpensive, and small unit for my bedroom, and this is perfect for my needs. The Emotiva B1+ speakers are currently being fed. My audio source is a Chromecast Audio connected to the T8 via optical in, and while the Sabre ES9018K2M isn't the newest chip around, it is still very capable. I also tried the other inputs, and they all worked well. There's been a bit of confusion about the tube signal output. If you want the tube sound, you need to use the front 3.5mm headphones, according to some online reviews. They confirmed that the tube signal goes to the rear of the RCA after contacting Aiyima. If no tube is inserted, there is no audio output. I've been using a tube from the NOS store and am happy with the sound. There is a The bass and treble adjustments are nice. Since I'm using this in an upstairs bedroom where I don't want a sub placed, a slight increase in bass EQ is all that my speakers need to sound better. The only way to adjust bass and treble is through the remote control. If you damage the remote, you're out of luck. There is a I like this T8 a lot. This is perfect for my needs, I'm a fan of small budget hifi components. The A07 sound is better than my outgoing AD18.
👤The components have great value. The higher end DACs like the $400 MSRP are slightly older than the ES9018K2M. The DX7 was discontinued after it Debuted in 2017: Topping it. The NJW1194 chip is discontinued, which I'm guessing is how Aiyama managed to swing these budget-friendly prices. The tube is a decorative attachment to a solid-state amplifier. I like the way the tube is protected. It has great audio quality. The unit is easy to use on my Win10 PC. The main reason I wanted this was to replace a smaller portable DAC that I use at work, rather than have a volume knob. My main gripe is that my headphones don't plug in properly, even though the unit is 30 minutes old. If you leave it alone it's fine, but if there is a movement it will cut your feed. If the unit degrades, I may have to adjust my review, so I'm a bit wary about the longevity of this unit.
👤I didn't want a surround sound system for my setup, but the real powerful amplifier are pro audio with no remote control ability. There is a The pre-amp and crown amplifier is perfect. I have grown to love that tube warmth. I am using an optical input. Other inputs are also great. There is a The red knob has a rotation that adjusts volume. I have seen some use optical cables and get a delay before I can say there is no delay in audio transmission. There is a The amount of range control is huge. It is nice to have bass and treble control. The ability to control all functions of the pre-amp with the remote is a cons. The input button on the remote turns off my TV. The cheapness of my TV Hisense 65 and the fact that the pre-amp has a Bass and Treble button on the remote are not the fault of the pre-amp but of the remote. This is a good pre-amp. Double shielded or shielded audio cables are recommended when connecting this pre-amp. The setup includes drivers for the Dayton Audio PC83-8, a series of parallel 8ohm per amplifier, and a TV.
If you have any problems, you can return the item. The streaming range is up to 12m with no pop when connecting, and the core supports aptX and aptX HD. 50W RMS X 2 power output, 20 Hz - 20 kHz, 0.04% THD, built-in speakers protection circuit, best for outdoor/ceiling bookshelf/ computer/ desktop Floor standing speakers can use iPod, Phone, MP3 players, TV, Echo Dot, CD players, or Streaming Media players as input. Adopt 2 x 6J4 tubes to get clear audio sound, tubes can be replaced by 6K4, 6J1, GE5654, 6AK5, 61, 6BC5 and so on, with headphone output for 16-64ohm. The Hi-fi amplifier receiver is small, practical and powerful and is designed for customers who want to listen to Hifi. Digital amplifier is easy to connect to your audio system with no software to install or settings to change, it's perfect for your desktop or smaller space in your home or office.
👤It was easy to setup. Sound is clear and crisp. It is clear that Bass/treble is great when you turn up the volume. It's cool. I used Riverstone GE5654 Tube to set up the device. When I bought my first set of Riverstone tubes, I became a huge fan. You will not be disappointed in the sound quality of these when you order a mini amplifier that uses this type of tube. Get some banana clips for your speaker wire. Keep it clean and organized. It's easy to move your speakers around. Life is easier because of them. I used the cable connection to start it up. I have an amplifier connected to my Wharfedale. I am using my computer to play music. I can get a lot of volume from this small amplifier. I think my speakers are decent for their price. I love the sound they make and they are powered by this amplifier. The bass and treble work well. As I jump from song to song, there are no issues with making adjustments. The bass is warm and the treble is crisp. I have been sitting here for a long time. It was easy to connect to the internet. If you want to connect to FOSI AUDIO, you have to flip the switch on the back. When I switched to a wireless device, the sound was noticeably lower. Even though my MacBook showed the out volume was full, I adjusted the settings and heard a pop and the sound stopped. My MacBook was recognizing the output volume after I moved the sliders lower. Everything got louder. Check the output volume on your audio source if you experience this issue. You can hear an improvement in the audio quality when you switch back to the RCA cables. You won't be going back and forth testing out the sound when you listen to music or something like that. It's easy to connect any type of device you have lying around, with the help of the internet. I plugged in my Sony MDR-V700's through the front of my headphones after a good sampling of the amplifier through my speakers. The sound and clarity of the headphones is amazing. You get a clean sound through them. When I feel a track needs some adjustment, I like to have separate bass/treble. I think you will be very happy if you are a person who listens to headphones. There is a I am very happy with this purchase. I like how small it is, the power it has, and it never got hot. It stays very cool. This allows me to have all kinds of small electrical equipment on my computer desk to play with when I want to change up the sound. I am having fun with my mini-amps. I have a tube amplifier that I run the sound into first. The sound is amazing. I'm going to be getting more of these little pre-amps and messing with them. I love it!
👤I have been looking for a better sound from my echo dots. I am 65 years old and grew up with sound equipment, but downsizing for an apartment I believed too much in the hype and claims of Amazon. The desire to get rid of my large speakers, boxes of CDs and vinyl, and large wattage amplifier was too much to resist. I had a huge collection of music at my command. But at what cost? The sound was not good for me. Amazon called me twice to take back my reviews. I did not. If you get the right match, I have both built and bought tube amplifier that I love. The sound was instantly improved when I ran the 65 watt Fossie Tube amplifier through the basic Insignia Bookshelf Stereo Speakers. For the first time, I felt like I had matched the size of an echo-dot with the sound. I haven't tried this setup through my Advent towers or Bose as it might be a bit low for big high wattage speakers. You can plug this into an amplifier like my Crown, and run it as a pre-amp, but I am trying to cut wattage not relive my college days. There is a There are pros. The small speakers in my living room can overwhelm my living room which is 20 foot by 30 foot. Keep the volume close to the max and use voice commands to reduce it. The bass and treble controls have a positive effect and I don't need to run them at max settings. I can't hear any crackles or background hiss when Turing the Amp is on. It is aesthetically beautiful, and small equipment for small apartments. There is a When not in use, it is best to shut it off. When you shut it off with the switch, the echo-dot does not respond to voice commands, but the sound is in MONO and running through their small speaker, which is good for the size, but come on! 50 million songs can only be played through a 2 inch speaker. It can be difficult to find the right speaker connections and the outputs on the back of the amplifier. I used bare wire to make my speakers. I don't recommend the knockoffs that get terrible comments.
Do not use a power supply that exceeds 12V. Active multimedia audio devices, such as iPods and phones, can be used with the computer, CD, phone, and other player. The cables are not included. The tube 6N3 design is used for easy replacement. The dual run amplifier chip NE5532P should be adopted. The build quality is surprisingly solid and the integrated circuit is very good. This product is not a power amplifier or a phono preamplifier, it can be used for turntables or passive speakers. It needs to be connected to a speaker and amplifier. Contact me at: www.amazon.com/help/contact/A3BG62S1F23IH5 Thanks!
👤I immediately inserted a matched pair of GE5670W tubes. After 2 hours of warming up, the T7 was sweeter and warmer than my hybrid integrated amplifier alone. It had a bigger sound stage and more air, and I fell in love with the music. The better the T7 and the new tubes sounded, the more they burned in. I was in heaven after 20 hours. I prefer the ifi i-tube unit that costs almost $400. I'm a happy camper. Buy it and enjoy it!
👤I don't know much about the hobby, so take my impressions for what they're worth. I recently bought a decent budget system, which included an AT-LP 120X turntable, Aiyima A07 power amplifier, and Dayton speakers. I put a lot of research into each element, and was satisfied that all were as advertised, but I wasn't happy with the sound. I wanted to play my digital music, tone controls, and tubes on my phone because they are cool. I bought this one based on Aiyima's reputation and the quality of the A07. I am very happy with it so far, it functions well and does what it promises. The sound is bigger and has more character even with the tone controls flat. It's clear, with no noise or hum, and the detail is great. I immediately started hearing things in the music I didn't know were there. The build quality seems very solid. There is a The included tubes seem good, although I also ordered a pair of GE tubes and have mostly listened to them, and they sound great. I don't think the upgrade is necessary, but I would be happy with the included tubes. The tube sockets don't seem great and could be more attractive as well, but I only have one quibble with the unit. My turntable has a built in one, so don't plan on it filling that role. I was not sure about the purchase. I am happy with the results. After putting it through its paces for a few days, I am hard pressed to find anything to complain about. The sound I am able to get is clear, pleasant, and fills the room. It is an easy five stars for the value.
👤I got this pre-amp after using it's lower end sibling, 6J1 tubes, which produced a warm natural sound that you can listen to for hours without any fatigue. It is very similar to the sound of vinyl. I decided to give the big brother a try. It's a little more expensive. The sound quality is comparable to the 6J1, however the output levels were lower than 6J1, which meant you had to crank up the amplifier levels higher. You cannot go wrong with either of the Aiyima tube pre-amps. It's the best bang for your buck. You can listen to the sound for hours. I replaced the stock tubes with GE tubes, and that gave me a noticeable boost in sound quality.
👤The expression and the stack of junk in the photo show my age. The upgraded tubes haven't arrived yet, but I ordered them. This is what I think of the supplied tubes. It was easy. I connected the output of the Topping DAC to the T7's inputs and then to the lower unit on the Marantz receiver. It feeds a pair of Heresies and a sub. I connected my phone to the internet. There is a The performance is exceptional. It pairs quickly and the sound benefits from the tubes' effects on the signal. It's debatable whether the Marantz benefits from the additional tubes and circuitry or not. Some of the best sounding gear ever made was made by Marantz. I switched over to the slightly newer (1980) JVC, which has a clean amplifier section and 25% more power than the Marantz, but is nothing special. The sound on this receiver seems to bring the sound alive with a slightly warm colored sound. This is a good match. You would have to decide for yourself. The effect is good for most of the time, but it can cause some sibilence and smear to high-frequency details. I'm anxious to try the new tubes, and even more excited to try the brand new A07 or A08 class D amplifier. There is a If you're just looking to add a wireless accessory to your setup, this unit should be considered. May 30, 2021, is an update. The upgrade tubes are a definite improvement, but they're noisy. It doesn't matter when the music is playing, it's just a slight hum and hiss. The effect of these tubes on the sound is less harsh and adds a bit of sizzle to the higher frequencies. The tubes that came with the amplifier didn't sound the same. I don't think my setup is as good as yours. Trying to see the difference is worth it. There is a The control knobs are made of aluminum and have a mechanical connection through their pots to the main circuit board, which is a knock against the unit. I'm not saying that I didn't hear it in the music, but it's easy to hear wearing headphones and using the knobs.
Mini size and excellent performance: all designs full of details, such as solid aluminum alloy knob, gold-plated terminals, grey integrated moulding aluminum alloy shell, looks vintage and elegant. A stereo audio preamplifier and headphone amplifier is designed for the high end audio enthusiast. A 120W@4ohm x2 channel amplifier is a great way to upgrade your speakers. You can stream music and stereo sound with the aptX LL amplifier. A 6dBi high gain antenna is used for long range streaming up to 20m in a complex wall structure. With a world of input mode options, DA2120C is always getting satisfy. A remote control that adjusts the inputs mode/volume/bass/treble/EQ/mute/loudness is included.
👤I bought this from Amazon in August of 2020 and have had it for a while. I used it for video editing and bought an S.M.S.L. Q5 Pro integrated amplifier from Amazon. The Fosi was not an upgrade. The S.M.S.L. can drive speakers as loud as 120 watt per channel, but the Fosi DA2120C can't drive speakers as loud as 120 watt per channel, so I'll start with what I can objectively measure. The Q5 Pro was advertised at 50WPc. I used 3 different pairs of speakers and measured them with SMAART and a phone app, and ran program material through both the Amps and theAnalog. When turned up to the point of audible distortion and the backed off a "hair", the Fosi was -4dB. It didn't sound as good as the S.M.S.L., and I had to turn my active sub down 50% when using the Fosi. This is subjective and could change with different equipment in a different room. It's a big difference in my situation. The noise floor of the Fosi was inaudible using a variety of inputs. I didn't test the optical input. I had no issues with the device. I kept the Fosi as a backup, but I wouldn't recommend it.
👤I decided to use my computer and television to stream audio from my old bookshelf speakers. I was trying to build the system on a budget after my old receiver gave up the ghost. I wanted to be able to stream audio to the system. I knew I needed a DAC as well. I decided on the Fosi Audio DA-2120c after a lot of research. The first photo shows a box. It was undamaged and sturdy inside the Amazon outer box. The second photo shows a box. The unit was well protected. The unit has a power supply, optical cable, and a computer cable. The instructions are a bit confusing and appear to have been translated from Chinese. The print is very small and the readers next to the unit in the fourth picture are also small. It's fairly easy to connect the unit and put it into operation. All functions can be controlled by either the two knobs on the front of the unit or the supplied remote. The left knob has inputs that include: optical, coax,usb, and bt. Holding it down for a few seconds will power the unit on and off. The right knob has volume on it. A quick press un-mutes the unit. Holding the knob down for a few seconds cycles the unit. The remote is much easier to use. The input in use, signal frequencies in KHZ, and volume can be read on the display. The remote has a display button. I bought an Oasis to stream from my television. It was easy to pair it to the DA-2120c. The only thing that indicated it was the Avantree unit. The speaker connections on the back of the unit accept either bare wire or banana plug speaker wire. I am using the blue tooth and the RCA connections to bring in the audio. The unit took about 15 minutes to connect. I was able to figure out most of the functions by using the buttons on the remote. I think I might have looked at the instruction manual to find a button. After I connected the unit and powered it up, I used the optical input to play movies and music from my computer. The sound quality and power of the amplifier made me very happy. The unit doesn't produce any heat when running at normal volume levels. It never got hot when it was cranking it up. I am very happy that I chose this unit. It had all of the features I wanted in a small package. It feels solid and well built. Hopefully, it will last for a long time. I will update this review after a few months of use.
The Preamplifier needs to work with active devices and not PHONO, which can't be used for record players. Excellent sound performance, no background noise, Warm and soft tube sound, Sound quality enhancement, and Pure tube preamplifier are all suitable for all amplifier and music types. The vacuum tubes can be replaced with various models. Mini size and exquisite appearance; blue tube light and front panel; Mellow and solid touch feeling.
👤The tiny preamplifier adds a warm and rich taste to the sound. Building quality is good. The circuit board is neat. A single 555 timer IC and some rectifier diodes are used to convert input 6V to high voltage and light the tubes. The input and outputCapacitors are considered to be hifi. The classic passive Baxandall Tone Control is bass and treble control. There is a It is a one stage preamp using tubes and op-amp ICs. I think it is a pure tube amplifier. It works like a charm.
👤It's so tired of flat music. I have been listening to mp3 files for years, like many of you. Digital files show their nothingness on high end systems, even though the sound is fine on cheap headphones, on lesser systems in noisy places, and in cars. I like to listen to vinyl, was raised on vinyl, and have burned vinyl to DVD with great success. Many CDs are very good, especially if they were taken from masters that were recorded before the 80's. You will hear artistry in the recording process, if you put on Emmylou Harris or Merle Haggard from the 60's through the 70's. There is a That is not the only matter. As I continue to expand my digital library, and look for ever more convenient methods of playing it, I finally bought a Tab E lite last fall, with a Gig 64 card in it, and loaded it with music. It's a good idea to carry it to the barn, plug it into the system there, or into the aux port of different vehicles. I needed to make the sound better on a great system so I used MediaMonkey to make it. I am very pleased with the results of the research that led me to this device. It doesn't amplify the volume significantly, which is a letdown at first, but perhaps a good feature overall as it doesn't overdrive when input into another pre-amp, in my case, a CarverCT 17. If you want a lot of amplification, use an amplifier, this is a pre-amp that works as a pre-amp. There is a This works well as a sound shaper. Music that was flat and lifeless is now full and vibrant. The bass is loud and clear. The highs are clear and bright. There is a feeling. I am very happy. I backed the volume up two clicks after cranking it up all the way up. I never heard a difference in volume on my system. Significant changes are made throughout their ranges by the bass and treble controls. The bass clicks from full when I keep the treble all the way up. I put in some 5654W JAN tubes from the very beginning, so I am not going to comment on the tubes shipped with this device. As the tubes settle in, the sound has become warmer. There is a I am very pleased with the sound. I like the feel of the device. I will update this if there is a problem soon. I used this for about 8 hours straight the first day, listening to both mp3 files and streaming radio, all through the device. The sound is great again. I can recommend this item if you understand what it does and how it is to be used. It is in line with my expectations.
Tube warmth, class D efficiency. There are two types of inputs:Bluetooth 4.2 and Aux. Adding an active subwoofer output. A high quality amplifier. Very low THD 0.1%.
👤The fit and finish is great for the price, and the knobs feel great. I gave this a look because it has a sub out and I wanted to use it for something. I put it with two Dayton Audio B452 airs and a Sony Subwoofer and it sounds great, even with the stock Chinese tubes. There is a It has two aux in's, ausb port for sticks, and a bluetooth connection for use with a computer and record player. They work great after trying them all out. It has a jack on the back that can be used for quieter listening at night or when loud music isn't the best thing. A great little hybrid tube amplifier. It lacks tone controls, but you could pair one of the tube preamps with tone controls through one of the AUX inputs. I would recommend this to others as well. Dayton Audio should do more branded tube gear in the future.
👤I use this little amplifier for my speakers. I am using an offboard amplifier from my computer. 1. It sounds great. There were some old DCM bookshelves on it. I have my Monitor bookshelf running from it. Both sound good. Maybe not as good as a 5k amplifier. This did not cost $5k. 2. I like the look of it on my desk. The blue glow from the amplifier is appealing. 3. It has two inputs. I looked for high and low and found only one RCA and other connections for desktops. I use Aux1 and Aux2 to run my computer and turn table. I can use every thing I need for inputs. 4. There is a sub out. Most bookshelf speakers don't go very low, so this is a life saver. On the positive side... The left channel went out and I had to return my first unit. It stopped working when it got scratchy. I was out an amplifier for only one day after it was replaced by Amazon. There is a The left side of the new amplifier is very rough. There is a There is a quick tip to solve the problem. Lower the volume on your computer. You can raise the volume on this amplifier. The POT will be removed by the extra volume. The first unit had a bad POT and the second unit had a bad POT.
👤I bought this thing on the spot. I was looking for a small amplifier to drive speakers in my bedroom. I wanted a small device that had a few inputs and a connection that could drive speakers to a decent volume and sound good for bedroom listening. My main living room rig is a mcintosh c28 preamplifier, a proac studio 100 speakers, a vpi turntable, and a mac mini server. The acurus system in my office includes a cdchanger, acurus preamplifier, acurus 250amp and rogers ls3 speakers. I enjoy good audio. I own a lot of high end audio equipment at home and at my recording studios. I was blown away when I connected the dayton audio amplifier to the speakers. This thing sounds great. The top end is clean, powerful, and has plenty of power to drive all of my speakers to great volume. I have hooked it up to my old favorite pair of tannoy pbm5 studio monitors, a pair of hafler monitors, my rogers ls3/6a, and currently a set of my yamaha ns10 studio monitors which are known for being harsh. The ns10's sound great. Truly. I'm thinking of buying another one of these to drive my other pair of ns10's in my studio. It is warm and clean. The high end of the ns10's tweeters have tubes round them. I have a small powered Yamaha sub that I use to round off the low end of the octave. The little rig in my bedroom sounds amazing. This dayton amplifier sounds amazing when I listen to music on my phone, or stream audio from a website. This is a no-brainer for less than 150 bucks. I'm going to get a few more of them, one for my studio ns10's that I use for an extra mixing reference, and maybe one to drive a set of b&w minipods that I have out in my garage. It's so convenient to just hook up this little amplifier and send music from your phone or iPad via blue tooth... It sounds great. If you are wondering about this... Don't. Get it. It's that good. Does it replace my rig? No. If it was my main rig, I would be happy. It can fill a small room. It sounds nice for a digital amplifier. I may experiment with different tubes later, but the stock tubes sound fine. They don't distort or sound crunch, just add a warmth and roundness to the bass. A simple set of tone controls would be a good way to improve this thing. If I could add a touch of the top end to the ns10's, I would be able to improve the overall tone and sound. It's small, but mighty. It looks pretty cool. The controls are solid. I've found nothing wrong with this thing, the connectors are all quality. Truly. It's that good. I'm going to setup this dayton with my main proac speakers and listen to some vinyl and higher quality digital files to see how it performs next to an audiophile level system, I'm sending my mcintosh c28 in to get recapped, and I think I' When I get the results, I'll change this review. This amplifier is absolutely amazing for just over $150. Truly.
The audible tones that guide your tuning are also available in the BOSS Tone Studio app. The 2.0 CH is small and powerful. The design makes it portable, with enough power to amplify the music. The sound quality is improved by 40% with the upgraded chip compared to the most Amp used on the market. Ensure the stability of the connection, no pop, no audible noise during the connection, and up to 50ft range, even in broad place, reach 12M. Simple operation. The remote control can be used to control the volume. Only control the volume of this amplifier and not the AUX state will you be able to control the volume of external equipment. You can enjoy the charm of music alone with the multifunctional earphone monitoring function. The bass/treble adjustment design helps to create the sound quality. Product life and stability can be delayed by circuit design. It's best for bookshelves, computers, and speakers in your home. Only for passive speakers, not for active speakers.
👤I bought this because I needed a small amplifier. When the headphones are plugged in and the amplifier is on, there seems to be hiss coming through them. It's not noticeable when you're playing sound, but you can hear it when it's quiet. The sound volume adjustment on this amplifier is digital, and it resets to a specific level when it is turned on. Since the "zero" resets whenever you turn the thing on, the mark on the knob becomes useless. It's weird and mildly annoying. I have to adjust it to the level I want every time I turn it on, as the "default" is too loud. There is a I'm stuck with this one because most of these are not equipped with a headphone jack.
👤I can't speak to the sound quality of the receiver because it was sent back because the speaker wire terminals were broken. After reading the instructions, I tried to open them, but the terminals were screwed shut tightly, and most wouldn't budge. Some of them began to remove the back of the receiver instead of opening it. I don't think it was user error, but the terminals were tightened so tightly that they were not usable.
👤I was surprised to see a box with a "best choice - best quality badge" when I received the product. It should have rung a bell if it was a sign that you don't brag about your products, you let them speak for themselves. At this price point, you use anonymous, cheap, brown, cardboard boxes, not glossy multicolor printed ones. I don't think so. The power switch was sturdy. At first. Press it into the unit. It is still usable, but it is held in place by its own leads, instead of a separate screw. The wire terminals looked good. I needed the latter for the space constraints of my application. The second surprise is that one of the wire terminals is impossible to open. I know how to fix these things, so I'll open the unit and replace it. I thought to use banana plugs for a test before the operation since there was a seal which I needed to break to open it. There is a Depending on your expectations, the sound is good for this price point. I need 50% on the line input and 50% on the phone. The latter is not usable. After 10 to 30 seconds, connections drop off. I couldn't hear a single song. I put the two units side by side and tested how it went, turning everything off when trying the Moukey, to see if there was any interference. The device worked perfectly. The Moukey was dropping connections. The product is faulty. There is a There are only three amplifier which have both speakers and headphones. I wanted both in one unit. This one is too cheap and does not work in wireless mode. The second one has the same problems as the first one. The third is only 15W per channel which is not enough for my needs. I will purchase a speaker-only amplifier instead of an amplifier for both speakers and headphones because there is no shortage. Maybe a separate headphones one, if I need it. If you absolutely need an amplifier which has both speakers and headphones, and you absolutely need more than 15W per channel on the speakers, then I guess this or the Pyle will do -- but only if you need it for a wired connection! If you need it wireless, you'll need a separate unit, which is less expensive and smaller than a separate amplifier. You have to deal with the cheap build of this unit, and pray that the power switch won't come off when you switch it on and off.
The metal aluminum case is very suitable for home and desktop audio system use and the mini size with attractive appearance makes it fashionable. MM Phono input converts the signal from the phony to line level signal and amplify it, with low- noise integrated circuits and high-quality components to ensure clear and clean sound. The 3.5mm AUX input can amplify the low level audio signal from your phone, tablets, mp3 and other devices. The JAN5654 vacuum tube and HiFi Sound are the best for your music because they improve everything from detail, transparency, immediacy, richness, dynamic, tone, etc. Pluggable tube sockets are easy to pick from and alter the sound signature to one's liking. The max output power of the TDA7498E amplifier IC can reach 160W+160W, and it is equipped with a 32V/6A power supply, which makes it easy to drive most home passive speakers. It's convenient to connect an active sub and build a 2.1 stereo audio system. It is possible to get more smooth and delicate sound by adjusting the bass and treble knob, and it is also possible to enjoy the original sound. A bassboost switch is designed to enhance bass effects and make you feel like you're in a movie. The metal black case and vacuum tube with blue and orange decorating light looks fashionable and attractive, it is very convenient to use and suitable for stereo home and desktop audio system.
👤I ordered this not expecting it to be cheap, but here I am. There is a In my spare time, I repair vintage electronics. I went looking for speakers that wouldn't fit my beomaster 8000 because I wanted some. I needed something that had a built in amplifier, rca inputs, and a radio. This checked the requirements and had the power to drive my Bose 501s. The tube pre-amp was a bonus. Good looking construction is solid and heavy. The wide range of DC voltages makes it easy to replace a bulky adaptor. There is a The sound quality is similar to my B&O Class A mono block, but with the preamplifier. The only thing that irritates me is the fact that other receivers have a beep that I don't like. There is a My technics play perfectly through it, and the signal is stable. The ground works well with no hum. There is a The tubes came with it. Being made in China by a company I have never heard of, I expected the tubes to be as good as the Soviet ones. When I saw genuine, made-in-the-USA, General Electric, 5654Ws in the box, my jaw dropped. The notorious JAN type is not just any 5654Ws. JANs are the mil-spec type designed for longevity and performance, and are considered by many to be one of the best for audio use. I keep a few in my personal stash for repairs because I know they will never go bad. There is a I am impressed. I have no regrets for the size, form factor, number of inputs, sound quality, and price.
👤This amplifier is built on chips. The magic sound is not created by two tubes pre- amplifier. There is an electronic sound. The manufacturer is not completely honest.
👤I wanted a small form factor, power and bluetooth when buying this Douk amplifier. I decided to take a punt because this unit appeared to be able to cover those bases. The addition of a pre amplifier was an added bonus for a vinyl junkie. I upgraded my speakers to Q-Acoustic 3030i. They match very well, no need for a sub! There is plenty of power in reserve when you feel like cranking it, and I am still a little startled by the sound quality and bottom end. The sound is great regardless of source. There is a It's a cool looking, well built and very functional little unit that does exactly what I bought it for, can't ask for more than that. I took a punt. I gave it a thumbs up.
👤I am not so sure about the Wattages that they advertise, 160WRMS on each channel. The game is changing around 120W more or less around the number for each channel. Pick the signal up in a second. The range is very impressive. It would be nicer if they put a building fan for cooling. I used this little badboy for 14 hours and it didn't give me any issues with overheating. The price I paid was $150. I got the sound quality that I wanted and it was a few dollars off. This is a hybrid version. I think my money was well spent. I have dual 8 inch floor standing Onkyo speakers and polk psw10 woofer. The sound was amazing. The cute tube created by DOUK audio is affordable. I'm making you purchase more of your products.
Multiple audio input methods, it supports multiple audio inputs from various devices like iPod, phone, mp3 player, laptop, desktop computer or other streaming media players. It's a nice vacuum Headphone tube preamplifier that's exclusive to customers who pursue Hifi sound! Tube T6 PRO can be used as a headphones tube preamplifier. The output of the headphones is 3.5mm and can be used for 16300 headphones. The QCC3008 is a support device. Signal transmission is faster and stable. 61-EB tube vacuum design provides warm retro tube sound.
👤I wanted to add a little "tube magic" to my audio setup. The previous setup consisted of a Lynx Hilo DAC connected to a Yamaha speakers and a subwoofer. I was looking for a cheap tube amplifier to do that. A couple of others here, as well as this brand, Aiyima. They all had the same features and cost between $50 and $75. The key features that sold me was the fact that this amplifier has both wired and wireless options. I decided to get this even though the price was slightly higher. I ordered the Riverstone Audio GE5654W Platinum Matched Pair upgrade tubes after reading reviews here. I didn't bother installing the stock tubes, so this review is based on three weeks of listening to the GE tubes. Let's talk about the sound first. It is great! I have never heard Yamaha speakers sound that good before. I have experience with tube audio. Audio Research tube pre- and power Amps are in my family room setup. If you have never ridden a tube, you will be in for a great ride. I couldn't stop smiling when I turned this amplifier on and fed it a jazz stream. The Yamaha speakers were sterile and neutral with the Hilo, but with this little tube amplifier, they are very well defined and create a very well defined sound stage in front of me. My main mode of listening is on my phone, where I can listen to music via the LDAC on my phone, and on the apps on my phone, where I can listen to music via the app on my phone. The Hilo is out of my audio chain. A $50 spend has turned into two new Amps, a new Topping D70s DAC, a pair of planar magnetic headphones, and an IEM. The Topping D70s' inputs and its DAC are what I'm going to use for my end-game setup. This is a very good DAC. It sounds clean, but not digital. The Jotunheim2 is fed by the Aiyima via the Topping. This is the best sound I can get. I listen to Jazz on my phone or my library of FLAC audio files from my PC. I have the Aiyima's tone controls set at 12 o'clock. The Aiyima volume dial was set to 1 o'clock. The sound and volume didn't change much when I went from there to max. I tried the Aiyima's two inputs, both of which worked well. Windows 10 does not require a driver for theusb. The phone was connected to the internet right away. I tried to listen to my headphones with the Aiyima's single ended jack. That's okay. I would rather listen to them through the balanced jack. As soon as you plug in the headphones, the pre-out is turned off. This is a feature that I wish the Schitt Jotunheim2 had. The amplifier runs very well. The two tubes are not hot at all. I love this amplifier.
👤I used to use the Aiyima tube. There's nothing wrong with that unit, but this one is miles ahead of it. It is a little bit bigger, but it has the same features. The range was really good. I live in a large house with a lot of space and I have a lot of things connected to it. I couldn't believe it. If you want range, you definitely need the antenna on. There is a Another eye opener was the input of the headphones. When you plug in the headphones, they switch from whatever they were playing on to the headphones. There is no lag when plugging in or taking out the headphones. I tested the bass and treble response with the knobs. I was playing the bass and the treble at the same time. I was getting a better bass increase and decrease than what was advertised, which is always a positive note. There is a The pre amplifier comes with Chinese tubes, which is a downside. You can get better sound quality by changing the tubes. That's the great thing about this preamplifier. There are many tubes that work with it. You can get the sound that you want.
Sidetone- Sidetone control allows you to change the sound of your voice in your headset. In to your friends. Douk Audio P1 Preamp has been acclaimed by countless audiophiles worldwide, now they upgrade 6J5 to JAN5654 / GE5654 tubes according to their feedback, the sound quality will be greatly improved. P1 can be used as a HiFi tube Preamp, ausb DAC or a headphone amplifier with HiFi clear, warm, dynamic, sweet tube sound, bringing extremely high-quality sound. There is a support for APTX-HD lossless transmission in the qCC3034). Matching well with many audio devices such as iPod, Phone, MP3 players, TV, Blu-ray players, and CD players, the PC-USB is compatible with Windows/Mac/Linux system. The NE5532 opamp+classic 47 headphone amplifier architecture can drive headphones with a sound quality of up to 300 hertz, and a bypass switch is specially designed to turn on/off the tone control, more convenient to enjoy original sound or obtain more delicate sound with a bass control knob The blue and orange light decorating vacuum tube is very suitable for home and desktop audio systems.
👤This is based on my initial impressions of the item. I'm impressed. A great sounding amplifier. It was very well made. There were no complaints about the quality of construction. You don't know what you're going to get with this price range. There is a The bass and treble controls add to the P1's usefulness. I think they're analog. When they're set flat and then taken out of the signal path, I don't notice a change in sound quality. Having the ability to remove them completely is a plus. Even with the stock tubes, this sounds great. I have two things on hand for comparison. I've had a iFi Zen DAC as well. This little gem is better than all of them. It is more open and multidimensional. Better dynamics. It's just so sweet. There are tons of volume available. I like volume levels in real life. If you're on the fence about this, place the order. If you regret it, I will be shocked. I have done 2 tube upgrades since getting this. Riverstone Audio matched GE JAN 5654w and Voskhod Rocket 6J1P-EV/6ZH1P-EV matched pair from Tonal Tubes. You can detail out the a** with the Voskhods.
👤You say I could have fixed my PC audio problems for $100? Digital audio coming out of the PC is inferior to analog, I have always believed that. I know this is mostly a matter of taste, so that is what I like. I like the sound of R2R and Vinyl, it has a warmth and depth that fills the room. The sound coming from the PC was not as good as I had been led to believe. I was skeptical when I bought it, but I decided to take a risk. I've spent more than $100 on software and other products to try and get the sound of my music right. I was a big fan of Winamp on the PC, but then I discovered R2R and high quality vinyl, and I couldn't go back. I used Stereo Tool and MusicBee to get a decent sound out of my Alienware R17, which was equipped with NVIDIA. I couldn't get the sound of the ONKYO surround receiver to be as good as the one I was connected to. This is a little amplifier. A small box has a small amplifier, 2 bulbs, power cable and ausb cable. How much change can this make if you compare it to the ONKYO receiver? I set up the bulbs, plug them in, start MusicBee, and then select the right output. The sound that came out was amazing. The speakers and receive are the same. No software, no tweaking the sound, just stream to the preamplifier via theusb. This is the best investment I've ever made. Can't tell the difference between this and R2R. Get one of these immediately.
👤The sound quality is good, nothing perfect, but it has a little noise in the sound, but it's made by my computer sound card. The Bass and Treble control is very useful, it works perfectly, and the volume button works very well. I loved the design and it adorns my office. The power button has a light on it. It also has three switches for choose tubeLED color, tone, and input. When the amplifier is on, the two tubes don't heat up much. The gold plated 3.5mm headphone jack doesn't work well with my headset. There is a I tested all the input options and found that theUSB is better than theRCA, but I can't use the computer's built-in cable to connect theusb to my computer. I'm using the RCA cable, but I'll use theusb if possible. I didn't see a big difference in sound quality between the two, but the only way to get the cable to my computer was with energy and video cables.
Headphone tube amp bluetooth products from Nobsound. In this article about headphone tube amp bluetooth you can see why people choose the product. Aiyima and Fosi Audio are also good brands to look for when you are finding headphone tube amp bluetooth.
Nobsound, Aiyima and Fosi Audio are some of the best brands that chosen by people for headphone tube amp bluetooth. Find the detail in this article. Aiyima, Douk Audio and Dayton Audio are also brands that their products are worth to check.