Best Headphone Under Desk Stand

Desk 25 Jun 2022 10+ Comments Open

1. Headphone 6amLifestyle Aluminum Universal Headphones

Headphone 6amLifestyle Aluminum Universal Headphones

Universal design - hold your headphones and controllers in one place. It applies to a bag, umbrella, backpacks, keys, cables, etc. To accommodate accessories, please adjust the little arms of the hanger. 1 Hanger Holds 2 The dual arms of the headphone hanger can hold two headsets at the same time, keeping your headphones organized and ready to use. It is compatible with all headphones with their headbands within 1.37inch. The headset hanger is widely used under the glass, wooden or metal desk, table, shelf, cabinet in the home, office, dorm, cyber cafe and other scenarios. It could also be used to hang other items, such as purses, shopping bags, umbrellas, etc. A neater environment will be created with this hook. The design is user-friendly. The mount is lightweight and sturdy with premium aluminum, so that it won't break even if you hold the heaviest headphones. The raised tips on your headsets prevent them from falling. When you need to replace something in unforeseen circumstances, you will be able to do it with extra glue. Two mounting methods. The headset stand can be mounted without causing damage to the desktop surface, and it can hold up to 4.4 lbs. With screws, the headset hook could be installed for more firmness. Choose the installation method that is right for you. You can get a refund within 60 days or a free replacement within 12 months if you have non-human reasons. You can contact them via Amazon Messages if you have any questions.

Brand: 6amlifestyle

👤This double-hook headphones holder does exactly what it is supposed to do. It holds two pairs of headphones side by side. The double-sided hook makes it easy to store and remove your headphones from underneath a desk or shelf. I gave the Adhesion category a 4-star rating, since I have only been using it for a week and it has a tight seal. I am confident that it will be long- lasting since it is made with a 3M adhesive and includes a replacement strip. There is a It is recommended that you allow 24 hours for the glue to seal completely before hanging your headphones. This is part of the instructions. I purchased this one because of its design quality and price, and I am very satisfied. I hope this insight helps you make a buying decision, as I am not an employee of this seller or a representative of this industry. All the best!

👤I couldn't find a way to hang the heat gun on the side of my crafting table after I bought it. Many of the headphone hangers are plastic or foam, and I thought they would be perfect. This one is made of metal, not plastic or foam. It's the perfect size to fit under the edge of my crafting table for my heat gun. The gun is held with the nozzle up so that the heat won't affect the motor. There is a This comes with a glue to stick it on, but also a couple of screws to put it in my table. This isn't designed for this purpose, but it fills the bill perfectly.

👤I wanted to hang my headphones under my desk. The desk has a smooth bottom that should accept the included glue, but I decided to use the included screws just in case. It was difficult to install the screws due to the design of the headphone hanger. Since a screwdriver cannot be driven at a straight angle, the screws need to be put in at an angle. I predrilled the holes for the screws, but since the screw goes in at an angle, it sheared the screw off. I was disappointed that the screw sheared so easily, and the design made it nearly impossible to install the screws, because I was using a hand screwdriver to drive the screw. It is a good material and slightly smaller than I thought.

👤I like that it's double sided and works well for my purposes. It will be too narrow for some headphones. I found the measurement listed to be accurate. I only use this to store one pair of headphones and the other hook for hanging cables that aren't in use. I would like to secure it with the screws provided, but unfortunately the way it's designed makes it difficult to approach from an angle. I'm not sure how you could get the screw all the way in. You would need to drill a hole before you install the glue, and poke holes through it, so that's something to keep in mind. Unless you plan to put something heavier on this, it's not necessary. I wouldn't try to use the screws for something like a bag hook because they are small and mount from two corners.

2. 6amLifestyle Rotatable Compatible Headphones 6A 13BK

6amLifestyle Rotatable Compatible Headphones 6A 13BK

2020 The arms of the dual headphone holder can be easily moved around by you. They won't get in the way if you put them under the desk. You can store two sets of headphones. The holder has dual 2.5in arms and is ideal for all kinds of wired and wireless headphones. The arm of the headphone hooks are equipped with arched soft rubber pads. 2. The raised parts of your headphones prevent them from falling. The Headset stand can support up to 11 lbs. It's great for purse, cables, backpack, umbrella and also for headphones. 60-day money back, 12-month warranty are included in the quality assurance and after-sales service. If you have a question, please contact them. The rubber pads are attached to the ends of the clip to protect your desk from scratches. The thickness of the desk can be mounted with the headset hanger. It's also suitable for cabinets, shelfs, and glass flat surfaces. Direct use, no installation required, makes it easy to attach and use. You can put it wherever you want. The knobs can be twisted and fixed. No need to drill holes or apply glue. It's easy to install, remove or move.

Brand: 6amlifestyle

👤This one is strong. It looks and feels like plastic. The weight advantage of a plastic over a metal is given by this. There is an in-depth thought that goes into designing the product. This is one of them. There is a The arm that comes to the top of the desk has been moved so that it doesn't hurt your hand or fingers. The cushion is soft enough to hold the headphones and hard enough to last a long time. The use case difference is the only problem I see. This is made to hold the biggest headphones. You need to calculate your dimensions before buying this.

👤I like the design of the clamp for holding my headphones. The design is very sturdy. The left side of my new smart desk has a holder on it. It's so easy to remove the holder and move the desk somewhere else, I like that. I wanted a holder that could be easily removed if it was screwed into the table. The soft padding on the top part of the 2 slots that hold the headphones help prevent scratches to the headphones. The price is correct. If there is a need, I would buy this product again. Attached is a picture of the product holding my headphones. Good stuff.

👤This item is awesome! It was perfect for my use case. It is strong and stable. I have my headphones under my desk. This is a great headphone hangar/holder. Solid metal is durable, and others use plastic which can break. Very easy to install! You can protect your table and HPs by adjusting the knob on your desk. The max load is up to 11lb. Simple is beautiful! There is a There are noatable CONS.

👤It's a nice piece and it's much better value than some of the more pro-level offerings. Machined well, very nice finish, some type of power coat, looks and feels much better than expected at this price, rubber padding in the right spots, and good design. One could argue that the tips of the hooks could be better for safety, but on the other hand, it makes placing and removing the headphones easier. There is a The bottom part can be moved freely which makes mounding easy. Very happy, great value!

👤This item was what I needed. I needed something that could be removed from my desk and not be in the way. The desk is very sturdy. I have a metal bar that runs along the bottom edge of the desk and I was able to adjust the grip on it. I use it for my DJ headset. I'll be buying another one for the wired headset. The dual headset is great.

👤The thickness range could have been larger, but this stand works well for holding two pairs of headphones. I made a mistake by not measuring my table thickness. I fixed this by attaching removeable Velcro strips to my table and headphones stand. Well built and worth the price.

3. Foldable Headphone Aluminum Headphones Universal

Foldable Headphone Aluminum Headphones Universal

The under desk mount is convenient for storing. Easy installation of a springed C Clamp. For a near universal fit on most desks, the Under Desk Headphone Hanger is used. It can be lain flat on the wall when it is not in use, folding or expanding at your convenience. It is easy to remove and re-attach the screw. Soft rubber pads located on both ends of your desk or table protect it from damage. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers, shelfs etc. It's great for hanging game controllers, cables and other gadgets. The TV stand does not have room for the soundbar. The sound bar width is less than 2.1 inches, it is 5 lbs and there are two racks to support it. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.

Brand: Apphome

👤My TV stand doesn't have room for the soundbar so I used two racks to hold it. The sound bar is 5 lbs heavy and supported by two racks. I'm happy it worked out.

👤I'm glad I chose this one because there are so many different models to choose from. It has a heavy, solid feel to it, and it has a nice padding on the arm so it won't damage the furniture. It folds up when not in use. Great product! I am an actual consumer, not a fake reviewer.

👤They are very well constructed. I attached them to the end of the stand that holds my TV. I put my sound bar on them. The sound bar is small enough to fit on them, so they can hold it in front of the TV. The sound bar could not be held on the TV stand because there was not enough room.

👤This thing is perfect. My boyfriend's desk has a small lip on the sides that hangs over the sides, but it is a vintage metal desk. Since these holders are mostly designed for desks with empty space below, I had to search through a million to find one that didn't require so much depth for the tension screw. It works great after finding this one. It's easy to install, but will still hold a large clunky headset. The photos have accurate measurements.

👤There are three people working from home, one of them is a gaming son. I'm running out of places to put my headsets, my son has a gaming headset, and I've got my headset for Teams. This particular hook is unique for a couple of reasons. I like the metal construction. It blends in with any black furniture or decor. If it happens to be in a high pass area of your desk or table, the folding design will allow you to get it out of the way. The ability to adjust the orientation from a vertical to horizontal one was a feature that made this a definite purchase. My desk is made of wood and metal and has a lip on it. The standard vertical style brace clap design is useless because it is short of the height of the table. I can't use boom stands with this table because of the other accessories I have. The only thing I had to do was remove the two allen screws and attach them to the leg of the table. It is now a permanent fixture. A huge problem was solved when I reached for my headset. I bought two of them for work and one for home. A great buy.

👤I always remain objective and honest when reviewing products. I always review with information that I feel others would like to know about the product, as I always assume what I'm writing will affect the purchase. I try to go beyond surface characteristics and input into quality, value and application. I will always end the review with an answer as to whether or not I would purchase the item again, which I believe is the most critical question pertaining to the item. Let me know if you want me to review your items. I was looking for a cheap hanging solution for my headphones and this product was the only one I could say anything about. I usually have my headphones on, but it can flip up when not in use. The screw base makes it easy to use for different sizes of desks. I'll probably buy another one for my daughter. It's a very handy device, serves the purpose well, and is cheap, but sturdy. You won't be disappointed.

4. Headphone Headphones Aluminum Adhesive Accessories

Headphone Headphones Aluminum Adhesive Accessories

There are two noise cancelling microphones. The dual headphone hook design makes it easy to reach your headphones and keep your desk clean. The living room, bathroom, closet are some places where this headset hook can be used. You can hang items with it, such as clothes, towels, bags, headsets, hats, belts, etc. The modern black color is very similar to several types of home styles. This headphone stand under the desk is easy to install, you can tighten screws with aPhillips screwdriver or use an electric drill to lock screws into the desk or cabinet surface, sturdy and durable, or you can attach and press with force. The headset hanger is made from high-quality aluminum alloy and has a speciality of heavy-duty, rust-proof, scratch-resistant, and durable to hold two sets of headphones simultaneously. The raised end of the headphones keep them safe from scratching and dropping. The holder is compatible with most over- ear headphones and gaming headphones. 100% customer satisfaction guaranteed. The team has the best service. If there are quality and transportation damage problems, you will get a response within 24 hours and a total replacement or refund service at APPHOME STORE.

Brand: Apphome

👤I intended to mount it using screws. If heat/humidity isn't favorable in your situation, it can be problematic to use solely adhesive. You get an extra one if you have the unit already on the mount. I didn't want to go through the process of removing the glue. I had to peel off the backing to mount it, but it was so difficult that I had to remove part of the mount. It's not clear if that would jeopardize the attachment's strength. I would rather that they don't put the glue on the mount and just let you make your own decision. If you were to use screws with the glue on, the provide screws are too short to have much left inside the mounting surface, which could lead to a failure.

👤I mounted the headset holder to my work desk using the two small screws and the glue already attached to the holder. The holder is elegant in appearance, style and form. The grey color seemed to be compatible with my color scheme. I like that an additional strip is included if I want to relocate the holder, however I wonder if most people throw the additional strip away. I think it's a tough call, maybe most people throw away the two screws. I don't think the mount can be held to any surface with the help of the glue. I put the mount in one location, then realized my screws would need to go through a metal brace, and pulled the mount off the table in order to move it. The screws are difficult to fully tighten without stripping them because of the difficult angle between the base of the mount and the actual hooks, according to another buyer. I agree that I would have liked to have been able to screw the screws into the surface from a different angle, but I didn't have to. The screws should be slightly longer for thos angle. The small screws seem to be enough for the mount to remain attached to my table. While my headset is not heavy, I occasionally bumped the holder and it still held up.

👤The features that made me pick this particular hanger over competitors' product were the beautiful design, superb finish and the options of attachment. Usually, I prefer to mechanically attach hard goods whenever I can over attach them, especially hardware such as brackets, hangers to be surface mounted, and intended to carry a load of reasonable weight indefinitely. I chose this product because of the high performing 3M glue that I could use to place and hold the hanger, and also because I could pre-drill through the factory mounting holes before I screwed it in. It looked like a walk of an install. I used a conventional pistol drill with the smallest drill bit I could find. I had to drill my pilot holes at an angle because of the shallow space between the mounting plate and headset base. When I tried to screw in the smaller wood screws, I found it difficult to maintain the same degree of angle with the screws into the pre-drilled pilot holes. I will change my technique for install #2 so that I don't have the same situation again. The combination of high performance adhesive and two factory engineered mounting holes means that your hanger is going to be there forever and probably as sturdy as the day you installed it. The basic provisions make it easier for a change to be made. Quality engineering of a quality product for anyone who still appreciates quality hardware. Thanks! Drew.

5. VIJIM Headphone Foldable Universal Headphones

VIJIM Headphone Foldable Universal Headphones

The one-way folding arm design allows headphones and other small stuff to hang on it. You can save space by folding up when it's not in use. Under desk Headset HangerAdjustable clamps securely onto desks up to 2.04"/52mm thick and as narrow as 0.2"/6mm for a near universal fit on most desks. The non-slip silicone pad on the support surface will prevent the hook from scratching the leather of the headset head beam. The headphone stand is made of high quality aluminum, framed with space saving foldable structure, and finished with sand. It can carry up to 11 lbs. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers and shelfs. It's great for hanging game controllers, cables and other gadgets. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers and shelfs. It's great for hanging game controllers, cables and other gadgets.

Brand: Vijim

👤I didn't think I would need the fact that you can use it in multiple orientations and on objects with a wide range of thicknesses, when I bought this, because it was the least expensive of similar products. This gave me several options for the application that I have, and I was able to find a better solution than I would have found without this adjustability. It would have been better if it had a higher lip on the end to prevent it from sliding off.

👤This is my second desk mount. The first went to the trash because it was loose and narrow, and it let my headphones hit the floor. This one? The fold away feature makes it so much more convenient and easier to use. This year I will be by for my next computer. I will recommend it to others. Money was well spent.

👤The mount that dumped my headphones on the ground was replaced. Very sturdy. It's easy to install on my desk and keep my headphones out of the way when I'm not using them. The black color helps blend the hook with the desk. It's also fairly affordable. It is not very attractive.

👤Does what it says. Holds headphones. It is metal and takes a beating. They will hold up if you don't put them on the desk of a busy tech booth in an auditorium.

👤Over the years, I have been in many recording facilities. I have never seen a tool like this before. My headphones are new. Buy them in bulk.

👤These are perfect for my head phones. It was easy to attach to my computer desk and hold my headphones.

👤It works as you expect it to, so there is not much to say. It will stay up if you flip it up, that's a nice touch.

👤It's a great way to keep the headset out of the way. Sturdy and great value.

👤I'm in a work from home situation and I have to keep control. My headset is expensive and I don't want to risk it falling on the ground. I like to take care of my "costy" things, even though I don't have an obsessive-compulsive disorder. There's a soft part to put the headset on, nice features, and a metal build. I fixed it on my shelf and it fit perfectly. I think it's a good idea.

👤I bought this earphone holder because my earphones were hung on the desk's handle, which would push out the traces of them. There is a The soft leather support protects the headphones. After folding, the fixed brackets do not take up much space. It can be used at 90 degrees or 180 degrees if the screw hole position is changed.

👤It is hidden if not being used when the hook is up, thanks to the design of my DJ table. Even when I hit it, it was very sturdy. Solid built and priced. I can use it whenever I want since it is not fixed. It's easy to install and remove. Great purchase for me.

6. Headphone APPHOME Rotating Universal Headphones

Headphone APPHOME Rotating Universal Headphones

The dual Headphones Hanger under the desk can hold two headphones at the same time, with a headband width within 2.1inch. The rotating neck of the headphone arm allows it to be used as a storage option for heavy headphones. For a near universal fit on most desks, the Clamp can be as narrow as 5mm and as thick as 50mm. It is easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or table from damage. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.

Brand: Apphome

👤I transitioned from a regular desk to a standing desk and I love it! There is a I bought the Anti Fatigue Bar to stand on so I can work on a stand up desk. I bought a dual stand under my desk so I can hang my headphones when not in use. It's very easy to install on a desk and it's very sturdy, but I like that it rotates so I can tuck it inside the desk rather than have it stick out. Absolutely nothing! There is a 5 out of 5 stars! If you need to hang stuff for storage, such as headphones, book bag, and anti fatigue bar, I highly recommend this. It's strong enough to hold anything. There is a Hope this was useful. If it was, please click on the button below. Thank you!

👤The design is subtle and easy to install, and thepadded hooks can be adjusted to your desk. There is a If you have a thicker desk, you won't have much clearance for your headphones. This was used for our headset. The hooks aren't adjusted to go lower than the C clamp, so it barely fits under the desk. I thought it would be bigger and longer because of the reviews. Would not be possible to fit 4 quality headphones on here. I thought my headphones wouldn't be a problem at my desk. It works. It works and is cheap, but not my favorite for the purpose I bought it for.

👤Excellent headphone holder! I use this to hang my headphones above my headphones amplifier at the back of my desk. There is a The steel is very strong. It is very easy to install. I like the way the hanger rotates. I will probably get another pair of headphones. This is the best I have found before. I bought another one to see which one I liked the best. The other is made with plastic and takes up more space than the other. I'm sending it back. This is the keeper!

👤I use it to hold two briefcases. The Bag of Holding is from ThinkGeek and the large briefcase is from Saddleback Leather. Hanging them from the device keeps them out of the way of the robot. It looks better than any other method of storage I have tried.

👤I wanted to buy a single hook for my headset. I found a dual headphone stand and extra wide brackets. I don't have enough room on my desk to hang this hook. I need something to hang from the shelf. It is about 2 inches thick. The hook is perfect on the edge. I use the extra long arm to throw my headset on there. I know where to find my headsets.

👤I was worried that this might not hold up because my desk has a metal tube on the bottom side, and I needed something that was strong enough to hold two pairs of headphones. I've had no issues. The item I received is not the same as the one pictured. There are two small tunnels on the plane of the headphone-holding areas near the edges that you can cut out if you want to get a cable grip. It's too wide to hold regular 3.5mm cords, so maybe it would hold woven cords?

7. Headphone Headphones Adjustable Universal EURPMASK

Headphone Headphones Adjustable Universal EURPMASK

Customer service is great. Give it a try. You can return it within a month if you don't like it. They will send you a new one if it is faulty within a year. Universal under design allows for a near universal fit on most desks by attaching a thin, narrow, and thick piece of metal to them. It is easy to remove the Spring Clamp. The audible headphone arm swings underneath your desk for discreet and non-intrusive storage and swings back out for easy access. BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Soft rubber pads are located on both ends to protect your desk or table from damage. The under desk mount is convenient for storing. Easy installation of a springed C Clamp.

Brand: Eurpmask Choose The Color Of Europe

👤We needed a better solution to keep our headphones from breaking and this was our answer, it's very sturdy and feels very well made, it's even better if you have an xbox one controller, it's even more perfect. My purse is probably around 10 lbs. I'll probably order more for myself and gifts in the future. Highly recommended.

👤The hook portion can bend if you put a lot of weight on it and it is very cheap. There is a The head doesn't lock up. The clip is not tight enough to prevent desk steps that are less than a quarter of an inch from moving. You can get a Brainwavz Hengja Hanger for the same price that has better construction quality. I would've gotten a second one, but I got this instead when the page from my old order suddenly said out of stock and started directly to a screen protectors. I wouldn't buy it again. Cheap, poor construction, plastic bends, top sticks up a lot. A bad product.

👤It's easy to put my headphones out of the way. I didn't want one where you have to use glue or screws. You don't need a heavy duty one if you have light headphones. The mount has a sufficient amount of space. The desk is protected by the padded clamps. The mount has a hook so you don't lose your headphones. You can choose which direction you want to hang your headphones. The cord clip is nice, but it's stiff, so I just wrap it around the hook and grab my headphones when I need them.

👤This thing is great. I was embarrassed that I didn't think of getting this a long time ago, but I did not know it existed. Maybe it didn't. I am a recording artist and I use expensive headphones. They were not taken very well care of in the past, as they would flop around on various surfaces. The device is easy to set up and I like that the hook can be changed to hang things or not. I think it's a good deal so that I can get another one for my other cans. I recommend this to anyone who wants to protect their investment.

👤It was easy to put in place. I got this because I was sick of my headphones laying in random places. The hook is neatly underneath. The picture doesn't show it, but there is a small loop for a cord to go through so I leave my charging chord handing from there so all my cords are close together and easy to manage. You can put the headphones on the hook and swing them out of the way under your desk. I put one on the side table for my headphones.

👤I didn't expect to write a review on this. I thought I knew what I was getting. This is a cheap, easy to scratch plastic. The cable clip would be better not there. The only. The mechanism for twisting the hook into different positions is a nice thing about this. You only need to rotation from 90 degrees and 180 degrees. The hook is pretty loose and you can position it anywhere from 0 to 180. I would have given it a pass, but the junk quality means it should be a lot cheaper than other METAL items. It would be a good deal at five bucks, since I got it for twelve ninety nine. If you don't know better, maybe eight. No way in over ten. I'll probably keep it because it's not worth it with the Pandemic. It will have to do.

8. Headphone Charger Headset Charging Earphone

Headphone Charger Headset Charging Earphone

If you care about compatibility, style and quality, this gaming accessories is the best choice. It's a great gift for your kids, gaming friends, boyfriends, etc. All in one design, under-desk headphones stand, 3usb charging hub and 4A-20W. Can hold two sets of headphones and keep your headphones out of sight. 3 Port SmartUSB Charger:Detects your device automatically to deliver its fastest possible charge speed up to 2.4 Amps per port or 4 Amps overall. TheSafe Guard is a fire-resistant and hardened plastic outer shell that is built-in premium circuitry and a chip that ensures device safety. Quality Gourmet provides a 90-Day Money Back Guarantee and a 24 month warranty that will ensure you a hassle-free purchasing experience. If there is a quality issue with this headphone rack, please contact them.

Brand: Cozoo

👤Great idea and concept. Didn't find anything else like this. The included wire management tie down clips were helpful. The wire holding cutouts on the parts are very nice. I like the monocolor of the grey outputs that came with mine. It takes a bit to take off with 3M VHB tape. The power line runs below the unit, which would make wire management easier. You can see what I mean by looking at my photo. If the cable ran through the back, it would have been a cleaner look. The power cord is a tad short, as many other users pointed out. It fit my setup well, but I wish it was longer. Great product, all in all. This is definitely an improvement over the previous ones, as it was from a regular under the desk headphones. Would it be interesting if they had a version of this that was not powered so you could connect it to a computer? It's helpful for people with headphones that have ausb type.

👤This is a review for something. Skip the other headphones. You will get more bang for your buck with this. Way better than those overpriced headphones. Get this. You get a better quality hanger and also a charging port for your devices. The price is almost unbelievable when you consider that you don't get cable channels or a portable charging device. What I like. There are two headphone hangers. There is a There are cable channels for earphones. There are threeusb DC chargers! There is a Double-sided or a more permanent screw mounting is what you should use. Includes hooks for tidier desks. The packaging is gorgeous. There is a good separation between the headphones. Inexpensive. Not braided cable is what I don't like. There is a power cable. The power cable is at the bottom. The package has a headphone hanger with pre-applied double-sided tape. Extra double-sided foam tape. There are two screws. Three cable hooks are under the desk. There are printed materials. If you decide to mount using that option, you might need to change the double sided tape on your desk. I highly recommend this product, it has 5 stars out of 5. Hit the comments. This review is for something.

👤It works well. Even when I have my beats headphones, gaming headphones, and watch on it, it's very sturdy. There is a I don't have to worry about how fast it charges, it will work if I use 3 ports at the same time. It will charge on and off at will. I usually charge my devices and watch them at the same time. I'm not sure if it's because of the ipad pro or not.

👤One of theusb ports decided to self destruct. Quality is questionable. Contacting MFG to find out how customer support is. Good quality. The mounting screw-hole would have been blocked if the power cable had been oriented facing backward. A power cable would have solved this issue. The loop is not very noticeable when you mount it back from the desk. The product functions as intended. I wish this had at least one plug.

9. Yocice Under Desk Headphone Aluminum Headphones

Yocice Under Desk Headphone Aluminum Headphones

There is a 2 year satisfaction guarantee forValuable gift for Christmas, Thanksgiving day, Easter, Birthday, Valentine's day and more. Hook can hold up to 10 pounds. The heaviest headphones weigh about one pound. 3M VHB tape is used to adhere the aluminum material and soft silicone pad. One headphone hanger with 3M VHB tape. mounting on computers, desk and wall is durable.

Brand: Yocice

👤The frame doesn't bend without some force applied to it. The color of the product is great, but it doesn't scratch easily, like some other products that will scratch and ruin the look. Installation is the easiest thing in the world, stick to the spot, good to go. There is a There are pros and cons. My circumstance doesn't allow me to use the provided screws to install the hook. I bought this product because it came with a sticky pad. I have headphones that are not much heavier than the ones I use. The sticky pad didn't stick for long. It may have started peeling away from where it was placed a week before. I thought it might have been a mistake, but it wasn't. It's a very simple fix, I just bought better double sided tape and I haven't had an issue with it after that. I had to go out of my way to make it better, so I had to dock it some stars. That may be useful information for some people. The tape was not very good, but I am happy with the rest of the product. There is a This style of hook is perfect and many prefer it over the above desk ones. If you are able to do that even better, the color doesn't chip away, and the material comes with screws if you are able to do that, I would recommend this product over others. If you plan on using it that way, you should install a better quality double sided tape.

👤I didn't expect the glue to bond to my desk to be welded on. I am either weak or it has its own pull that was reinforced using superglue. It's important to plan where it's going to stay.

👤I put this under my desk with the 3M double sided pads. It is small but works for my G930's. The material is very strong. There is a The best part is that they included small clips. I was able to run the charging cable cleanly underneath my desk. There is a Overall happy. It was a bad deal for the quality.

👤I stuck it too close to where my legs were, and it would occasionally hit me. It sticks very well if it does what it's supposed to. The HyperX Cloud II headset is in place.

👤I can't stand the amount of stuff on my desk. I did not want a headphone rack because it was at risk of being knocked over. The metal is heavy for its purpose and won't bend. The mounting tape did not work. I used the screws that came with it. It was kind of annoyed. I didn't want to put holes in my desk. Overall happy with it.

👤The purpose of it is to serve as a headphone hanger. It is made of aluminum and feels sturdy. The only reason I'm giving it two stars is because it's not as advertised. There are 4 holes in the hook. Two (2) are located in the center of the hook and two (2) are located towards the top of the hook, which has slots to allow sliding the hook onto screws. I don't care if it's not what I ordered, since it does its job and I don't see it under my desk.

10. BRAINWAVZ Headphone Headphones Headsets Accessories

BRAINWAVZ Headphone Headphones Headsets Accessories

Don't talk about your feelings: DeCLUTTER your feelings. The Big-J under-the-desk headset hangers can be used to clear up space on your desk and shelves. The headphone stand is made with high grade plastic and 3M VHB tape and can hold even the heaviest of headphones with ease. There is a phone stand and a cellphone holster. Smaller than a stand, it's more resistant to damage than other stands. No mess, no screws, and no need to remove the red VHB tape cover, you're good to go.

Brand: Brainwavz

👤There is nothing wrong with it. It wasn't disclosed. You can see the 3D print lines on the surface. I am ok with it, just tell me about it.

👤I don't like buying a product that is 3d printed and doesn't show you the crappy lines running down the hanger. I hate cheap 3d printing that's being done in someone's garage, but the hangers is surprisingly sturdy and easy to use. If you put it in a more visible spot, it wouldn't look good.

👤My son's headset can't always be found on his bed or floor. It was a waste of money to put them under a shelf next to his bed. The glue is strong. We tried to move it to a different location, but it's stuck where it is. I think that's correct.

👤The stand is strong. Before placing the stands, I suggest to thoroughly clean the surface area. I put these under my desk to make it look better. Would buy again in the future. The items are low price will definitely recommend.

👤The initial sticky pad was strong, but I knocked it off with my knee. I stuck the sticky pad back on my desk after the hook came off. Good purchase.

👤It was very easy to install. I was hesitant at first but I am very happy with how things have gone. I like to keep my head seats hidden because I use a corner desk for gaming and work.

👤I was skeptical about the ability of the hook to hold things. It is pretty awesome after a few weeks of use. I put my headphones on and off all day.

👤These are clearly 3D printed, but they do the job you expect from them. Before you peel those strips, make sure you know where you want them and test them. It is a bonus if you get two. I have two hanging points, and they are both great. I don't know what the purpose of the smaller hook on the back side is but I've used them for my Sound Buds and they work for any in ear sports headphones which are wireless but have that "neck cable" for extra security. I would recommend it to a friend.

👤The little 3d printed underdesk headphone stand is very simple to use and has a cable tidy hook on the back which I use to tuck away my charging cable for my wireless headset. The metal band can sit atop the lip with the Arctis 7 being too small for it. I am very happy with this cheap stand.

👤I don't understand the reviews that say it's not sticky enough. What are you trying to do? Is it ice? The product is of a high quality. Unless you pull incredibly hard on it, you won't move. If it's installed correctly. What I was looking for. Don't be hesitant if you decide to buy this.

👤Absolutely brilliant. I hung my headset under the edge of my desk. Has done the job well.

11. NACODEX Headphone Control Lighting Accessories

NACODEX Headphone Control Lighting Accessories

The MAX SMART Cupholder has a small tray that you can use to store small items such as notepads, paper clips, binder clips, charging cables, and more. Use the small container with the cup storage space to organize your workspace so you can focus and do your best work. The gaming headset stand base has a hole-shaped design. A single button for easy to switch the lighting mode you like, 10 kind of multi-color flowing or single-color breathing effects penetrate from the base, and a fantastic gaming atmosphere. No driver is required for the 2usb ports and 3.5mm AUX portRGB headset stand, it supports transfer files or plug and play, no driver is required. The small size, easy to install and remove, headphone stand with a rotating bearing, which can be easily adjusted to different angles and has strong flexibility, isStylish and Simple Design. The stylish and minimalist design of your desktop provides a display of your headphones. The headset stand can be used for all size headsets. It has a balanced headpset stand to refuse entanglement, and a scratch on your headphones to keep your desktop clean. If you're tired of putting headset on the table at home, this pink headphone holder is the best choice for your PC desktop accessories, perfect gift for girlfriend, daughter-in-law, daughter, wife.

Brand: Nacodex

👤The light weight, cute colors and ease of use make it easy to hold my heavy headset. I use one of the twousbs for the ring light and it works great. 10/10 would recommend it.

👤I don't know if it's just me at this point, probably, but the final update is the only one I know of. Don't use a different computer to test it. Most of it worked after the seller sent me a replacement. The quality of the product isn't to blame for the base being flat. These are decent and worth the money, even though it is a bit pricey. Product is deserving of a chance. The seller gave me a new one, which I appreciated. I have to plug in the headphones after I shut down and turn on my computer, but I'm only having to do this after I'm done. I am not sure if the new stand will be different. These are pretty decent, so I'm hoping for the best. All the functions need to work correctly. There is a The stand has aux and aux ins. You have to plug in this device after you shut off your PC and turn it on again, for some reason. It looks like someone was mad and scribbled on the logo, but it doesn't look like a manufacturing problem. The device would randomly stop working. The LEDs work well. It's too nice to give it two stars for what it's worth. There is a If you're only using this as a stand, then go for something else. If you don't mind plugging in the device, you can use the aux andusb ports. This is my first stand, maybe they're all like this? I'm not sure. Maybe I got a bad product.

👤The NACODEX Headphone Stand has a headphone stand with a lighting system. There is a The lighting works even when the stand is plugged into a power strip. I have other stands that only light up when plugged into a computer. There are breathing and color modes. The stand does not remember the last color. A touch-sensitive button on the top of the base is used to change the colors. The company's logo is lit up, and for some reason it is called "AJAZZ." When I sit at my desk, I see that text the most. There is a The stand has a 3.5mm aux port on the back and twousb ports on the front. I don't use them because I power the stand through my power strip and my headphones are all wireless. There is a The stand is 412 inches by 412 inches. The footprint is small and doesn't take up a lot of space on my desk. The rubber feet on the bottom help keep it from sliding. The stand is stable. I tried to knock it over, but it stayed upright. There is a The stand can hold up to two pairs of headphones. Two pairs looks silly, but it works. There is plenty of room for big headphones in the usable height of 10 inches.

Summary

What is the best product for headphone under desk stand?

Headphone under desk stand products from 6amlifestyle. In this article about headphone under desk stand you can see why people choose the product. 6amlifestyle and Apphome are also good brands to look for when you are finding headphone under desk stand.

What are the best brands for headphone under desk stand?

6amlifestyle, 6amlifestyle and Apphome are some of the best brands that chosen by people for headphone under desk stand. Find the detail in this article. Apphome, Vijim and Apphome are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com