Best Headphone Wall Hanger Pack

Hanger 26 Jun 2022 10+ Comments Open

1. Latomex Folding Foldable Aluminum Headphones

Latomex Folding Foldable Aluminum Headphones

A coat rack single hook saves space. The coat hooks are made from aluminum alloy which is sturdy enough to hold heavy items and not easy to break, the screws are made of iron and can hold up to 35 lbs of weight. The coat hooks can be folded. Open it when you use it. You fold it when you don't use it, which saves room space. You can use these folding wall hooks to hang dresses, clothes, headsets, and hats in different places, such as bedrooms, bathrooms and closets. It is easy to install on the wall with screws or their strong glue. Soft sponge pads to prevent scratching. The clothes hook is 70 x 77 x 2.5 inches and has screws and wall hooks. The clothes hook is 70 x 77 x 2.5 inches and has screws and wall hooks.

Brand: Latomex

👤The family room is a music room. I hang cables. The floor is cluttered. They look nice folded up. Can be stuck anywhere. I use tape instead of screws. It would be nice if the hooks came with black screws.

2. Latomex Foldable Hanging Aluminum Headphones

Latomex Foldable Hanging Aluminum Headphones

The controller Wall Mount X 4 is part of the package. The heavy duty folding hook is made from aluminum. The coat hook is 78 x 26 x 71mm/ 3.07 x 1 x 2.79 inches and the screws are 25mm long and 8mm in screw head diameter. You can use these wall hooks to hang dresses, clothes, headsets and hats in different places, such as bedrooms, bathroom and closets. The hanging hook has a smooth edge that will not damage your clothes or items you hang on. The folding hooks are very easy to install. The hooks are reinforced with 2 screws.

Brand: Latomex

👤It's perfect for van life. Occasionally we use a low top Chevy van. Storage was an issue since the back seats were removed to create a bed area. We hang bags, organizers, backpacks, hats and clothes on hooks that allow the floor to remain free of items within reach. The hooks are sturdy and open when used differently than we had used before. It is hard to tell if they are hooks when closed.

👤The weight is sturdy. The brass ones we used were different. We hung them behind a door, and a door stop attached to the door was barely enough to keep the door from banging into unfolded hooks. I will probably order another set.

👤Great idea. It is easy to mount. I think they will wear out quickly because they seem a little bit too easy to open up and close, so I am wondering how long they will keep working.

👤The hooks are easy to install and seem sturdy enough for things like headphones, cables, shirt hangers, etc. The edges are rough and the aluminum has pits. I think that these are acceptable for the price, even though they seem to be poorly made. They are noticeably "factory-seconds" quality, so don't place them somewhere prominent.

👤I have a good holding power, I have one that holds my Yeti Hopper easily. It was very easy to install. The anchor is a little flimsy but that is just something that happens, screws were all good, and there were enough of both to install all the hooks.

👤I had to return them. I am not sure if I missed it in the description or not, but these are actually screwed into the walls. I did not want to add more holes to my walls.

👤It is easy to install and works well. If you need something that is discreet and functional, then you would like this. I have three hanging my bag, two for jackets and one for a hanging plant. I'm happy with the product. Highly recommended.

👤I mounted a booster in a bedroom with these. They work well and are sturdy.

3. Linkidea Gamepad Controller Headphone Headset

Linkidea Gamepad Controller Headphone Headset

The stand is made of high-quality aluminum. The PS5 PS4 Xbox one controller, desktop computer game handles, and most game controllers are compatible with the handle and headset hook brackets. The transparent patch and screw method is suitable for installation in any place-table, shelf, cabinet, glass surface, and so on. Product dimensions are 3.14 x 1.57 inches. The package has headphones stand X 1.

Brand: Linkidea

👤The controller does not provide proper support.

👤It's easy to install. It's high quality. The mount is made of solid metal with a black coating, but the brackets are plastic. It's easy to install if you have a 9 year old. The mounting system is strong. It works perfectly with the Xbox X/S controller.

👤The controller is too small to hold this small accessory. We didn't install it before trying to balance it. The pictures of the product were not real. Returning.

4. Folding Aluminium Foldable Headphones Max Load

Folding Aluminium Foldable Headphones Max Load

The package contains Headphone Wall Hooks. A black folding coat hook has a screw. The thickness is 5mm, the length is 3mm, the height is 234 and the width is 25mm. The screw size is M4x30mm. The package contains 10 x aluminum wall hooks. The wall anchor is 20 x Wall Anchors. A coat rack single hook saves space.

Brand: Heneng

👤It is a gamechanger for sure. I wanted hooks on the wall in our laundry room. The amount of space you have to hang things on is much more than traditional hooks, which is why you can fold them up when not in use. Very strong. I couldn't be happier. It's easy to install.

👤I love these! I used them as a ledge to get my irons off the counter. I like that I can close them when not in use and let the irons sit on them while they heat up.

👤This is the best idea ever. It is sturdy. They work well.

👤I put up most of my unused headphones. It was cheap and easy. Good quality.

👤The coat hooks were used in the arrival center. I hang the backpacks and coats on them. They were easy to install. They don't take up a lot of space and look pretty slim when folded up.

👤They fold when not in use. Great for the back hall.

👤The half of the screws were missing.

👤Great little hangers and like how they flip up when not in use. I think they would be great in boats of cruiser size.

👤We put these in the bathroom as towel holders. They become almost invisible when closed and hold our heavy Turkish towels.

👤Parfait pour arricher notre.

5. Headphone APPHOME Foldable Aluminum Universal

Headphone APPHOME Foldable Aluminum Universal

It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc. Small and foldable design saves space. It can be used to free your desktop from chaos. Safe and Stable: The headphone stand has strong glue that will allow it to last a long time. The materials are high-quality. The rubber pads on the headband protect it from wear. All kinds of headphones, such as wired headphones, wireless headphones, gaming headphones, TV headphones, and so on, are suitable for the universal headset holder. It's easy to install and can be mounted anywhere. On computers, desk, and wall. Clean the surface by using wipes.

Brand: Apphome

👤I was very happy with my purchase of this headphone holder, but it has been a year since I purchased it. I noticed that my headphones got in my hair when I noticed the odd goop on the bridge. The pull out bracket that my headphones rested on was the culprit. I was able to use alcohol wipes to remove all of the liquified glue and I was also able to repair the small pad that locks the brackets in the closed position with some automotive grade 3M double sided tape. Hopefully it will hold up better than what was used to assemble it. Is this the end of the world? I am going to keep an eye on it because it was a quick repair.

👤I have a charging station in my laundry room. The hug makes it look less cluttered and it gets a lot of stuff off the counter. I charge a lot of stuff on this station. The double sticky tape is used. I made it even more solid by attaching a couple screws to the holes. Unable to keep earbuds and headphones off the countertop while charging. If you don't have anything to hang on it, this is a great option. I'm very happy with the space that was cleaned up.

👤The option to screw it into your desk is what I bought this hook for. I tried the glue before I tried to put it in. I had low expectations, but the sticker is so strong that it's like a combination of Ultimate Warrior and Hulk Hogan. I'm thinking about buying another one for my towels.

👤My father built a desk for me that is solid wood. It was built for writing, not a computer. I used the glue that came with the product because I couldn't drill a hole in it. I have a very light-weight Sony headphones, but they haven't budged over a month. The hook portion is large and padded to not damage my headphones. I might put two different pairs on there. I love that when I move this desk, I can just close the hook and it won't be a problem. There is a The metal is heavy and shiny. It's a good addition to my desk. I wish it didn't have the logo, but it is perfect.

👤Unfortunately it did not last. It fell off my wall in the middle of the night, luckily it didn't break my headphones, I was sleeping. It was loud. I might use it on a wood surface with screws to hold it up instead of giving it to someone else. Holds fast to painted plaster. I've considered buying another one just for the tape. It has been on the painted plaster walls for a long time. It holds my headphones and doesn't bang when I place them down. The inside of the "hook" is made of some kind of material. It doesn't open without you meaning it to.

👤This is what it seems to be. I thought it would be bigger but it is not. I used the two screws instead of using the glue to stick to the wall. I would have been concerned that the headset wouldn't hold it's weight. There is a This looks great on the wall. When I moved my console, I realized I lost the space I wanted for the headset stand and that's when a hanging stand became optimal. This is in front of my console. It's difficult to pull it down when it's folded up, because you don't have headsets on. I think that will loosen over time with use and shouldn't be a negative.

6. Foldable Headphone Aluminum Headphones Universal

Foldable Headphone Aluminum Headphones Universal

The under desk mount is convenient for storing. Easy installation of a springed C Clamp. For a near universal fit on most desks, the Under Desk Headphone Hanger is used. It can be lain flat on the wall when it is not in use, folding or expanding at your convenience. It is easy to remove and re-attach the screw. Soft rubber pads located on both ends of your desk or table protect it from damage. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers, shelfs etc. It's great for hanging game controllers, cables and other gadgets. The TV stand does not have room for the soundbar. The sound bar width is less than 2.1 inches, it is 5 lbs and there are two racks to support it. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.

Brand: Apphome

👤My TV stand doesn't have room for the soundbar so I used two racks to hold it. The sound bar is 5 lbs heavy and supported by two racks. I'm happy it worked out.

👤I'm glad I chose this one because there are so many different models to choose from. It has a heavy, solid feel to it, and it has a nice padding on the arm so it won't damage the furniture. It folds up when not in use. Great product! I am an actual consumer, not a fake reviewer.

👤They are very well constructed. I attached them to the end of the stand that holds my TV. I put my sound bar on them. The sound bar is small enough to fit on them, so they can hold it in front of the TV. The sound bar could not be held on the TV stand because there was not enough room.

👤This thing is perfect. My boyfriend's desk has a small lip on the sides that hangs over the sides, but it is a vintage metal desk. Since these holders are mostly designed for desks with empty space below, I had to search through a million to find one that didn't require so much depth for the tension screw. It works great after finding this one. It's easy to install, but will still hold a large clunky headset. The photos have accurate measurements.

👤There are three people working from home, one of them is a gaming son. I'm running out of places to put my headsets, my son has a gaming headset, and I've got my headset for Teams. This particular hook is unique for a couple of reasons. I like the metal construction. It blends in with any black furniture or decor. If it happens to be in a high pass area of your desk or table, the folding design will allow you to get it out of the way. The ability to adjust the orientation from a vertical to horizontal one was a feature that made this a definite purchase. My desk is made of wood and metal and has a lip on it. The standard vertical style brace clap design is useless because it is short of the height of the table. I can't use boom stands with this table because of the other accessories I have. The only thing I had to do was remove the two allen screws and attach them to the leg of the table. It is now a permanent fixture. A huge problem was solved when I reached for my headset. I bought two of them for work and one for home. A great buy.

👤I always remain objective and honest when reviewing products. I always review with information that I feel others would like to know about the product, as I always assume what I'm writing will affect the purchase. I try to go beyond surface characteristics and input into quality, value and application. I will always end the review with an answer as to whether or not I would purchase the item again, which I believe is the most critical question pertaining to the item. Let me know if you want me to review your items. I was looking for a cheap hanging solution for my headphones and this product was the only one I could say anything about. I usually have my headphones on, but it can flip up when not in use. The screw base makes it easy to use for different sizes of desks. I'll probably buy another one for my daughter. It's a very handy device, serves the purpose well, and is cheap, but sturdy. You won't be disappointed.

7. Stick XL Headphone Hooks PACK

Stick XL Headphone Hooks PACK

Quality insured and Within 24 hours customer service respond with hassle free return or exchange, please contact if you have a question. 2 packs of wall mount stands are included. The hooks are designed for full and even support of headphones. 7 pounds per hook. Also, note: The headphones that weigh the most are the lightest. 3M Command strips are included with each hook. There are no tools or holes in the walls. Removes easily, no damage or mess. Not for wallpaper or wet locations. The plastic has a black finish. It is possible to mount on monitors, computers, desks, inside stereo cabinets, dorms, and office cubicles. Art museums, schools and libraries have minimalist modern designs. The desk stands and theprong form of monitor hooks are too much of a problem. These hooks are the best choice if you care about style. You can find their game controller hooks on Amazon.

Brand: Elhook

👤I was lucky to find these. I wanted to hang my steering wheels. I didn't want to put anything in the wall. There is a These wheels are used for "sim racing", so they have electronics and quick release mechanisms attached to them. The heaviest is 9oz. I weighed them because the hooks have a limit on their weight. There is a I did not do the same thing when mounting. I added another strip. I use the Command products a lot. It's a good thing. There is a We are now holding my steering wheels for five months. They still show no signs of weakness. I don't want my expensive rims hitting the floor so I check often. Chicken dinner was the winner. 2 years later, still going strong. A camper is very happy. It's a good thing.

👤I wanted to hang my headphones on my desk. It works well with Command strips. I am certain that this will work beyond my desk. I bought a second one that I use to hang hats that I need to wear for work. It makes for a convenient place for me to put the hangers so I can grab it before I leave. There are no problems with the construction of the hanger. I don't recommend using this to hang your controller. I recommend this for people who need a hanger to hang their hats or headphones.

👤It's great for my desk. I put it on the side of my desk. My headphones fell once, but they held my Beats perfectly. I believe it was due to the headphones being put on. The command strips do a decent job, but I would rather have 3m Tape. The product is great, but needs some better glue. It looks like you could add screws to the hooks, so you can put them on your desk. I'm not sure if it's pure speculation or not.

👤My husband and I are remodeling our house. We are working on organization since it was a bit of a mess since he is into computer gaming. We wanted something for him to hook his headphones on since he's been throwing them on the floor and he ends up running over his cord with his chair which isn't ideal. The hooks look nice and are easy to use. A normal hook wouldn't work because his headphones are large. We stuck this on the side of his desk so he could reach it. I was very happy with the purchase.

👤Picked these up so I could put my headphones on the wall next to my bed. The hook is a neutral white color that blends in perfectly with flat white paint, I was worried it might be blue or yellow, but it's not. There is a The command hook strips hang down and are not visible from the ground. I trimmed the tabs off because I don't plan on removing them from my wall. If you're looking for a temp solution for a dorm room or rental, look elsewhere or mount it on something you don't care about damaging, because that's what you'll get if you remove it.

8. Acrylic Headphone Adhesive Headset Headphones

Acrylic Headphone Adhesive Headset Headphones

If you need more firmness, you can mount the headset hanger with screws or strong 3M VHB two-sided tape. Loadable 3.3lb with tape and 33lb with screws. It's suitable for any flat surface such as PC, desk legs, cabinets, shelves, wall and glass. It can be used anywhere you like. A nice combination and sufficient quantity can satisfy your different demands, and you can share them with your friends. The headphone hook is practical and light, it is a good way to tidy up your desk, it will save space, and you can use it when you're not using it. The headset holders are made of quality acrylic, which is durable and firm, not easy to break, and the black foam pad design protects your headband headphones from wear when suspended. You can give these hooks to your friends as a present, because they are universal, and they are suitable for various kinds of headphones. They are easy to install with matched quality tapes, and you can stick them to anywhere you want.

Brand: Weewooday

👤I can't peel the plastic 3M label, so they may have changed what's used to adhere to the wall. I can't peel the covering on my long finger nails because I have a long nail. I've given up trying to get that off. I will try to use a command strip. The whole thing is brought up when I try to remove the protective label. See the picture. I was able to get that corner to peel off when I took the picture. It's very difficult to remove the protective label. It's very sticky and has 5 stars.

👤These are exactly what you think they are and how they appear in photos. They're very simple pieces of bent plastic with a thin layer of foam in the part that contacts the headphones, but they do exactly what they're supposed to do and so far, they've held my headphones without issue. They're an inexpensive choice that aren't the most aesthetically pleasing, but they do exactly what they claim and look like they do in photos.

👤These aren't strong. The first broke. All four were broken within a week. I ordered metal to be replaced. The headsets were only held by the children but they got some rough treatment. If you use alternate glue, it may work in another home.

👤I was excited when I bought this because my headsets will no longer be laying around. The glue didn't last long. I had to stick it back onto the wall after it fell again. I had to buy the ones that came with it instead of the ones that came with target. Since then, it has not fallen. I had to buy new tape for it because I think it's not worth the money.

👤It broke after catching on something and the hook came off. It took the paint off the wall.

👤I hung these with the headphones on. They are still tight and up. Prepare for missing drywall if you want to remove them.

👤It's pretty basic but useful. Does it keep my headphones off my desk? If you own wired headphones like I do, I would recommend getting cable clips that are waterproof to avoid having to loop the headphones around.

👤It's good to hold up well so far, just make sure to follow the instructions on how to clean the surface and give the glue time to stick.

👤I didn't know how to put my first 1 on. There is a I stuck it to the wall and then realized it was a tag. There is a I have a few headsets. I have a bag for my work at the side of the desk with a laptop and other bits. I bought them and they were very tough.

👤Works great for headphones and PS5 controllers. It might be a tad expensive.

👤Basic hooks are flimsy at the bend but I hope they survive. I will update if they don't.

👤These were used for the training room at work. They are easy to fix and good value for money.

9. Enbiawit Headphone Headphones Headset Mount Installation

Enbiawit Headphone Headphones Headset Mount Installation

Universal under desk design allows for a near universal fit on most desks. There is a new word for it. The Spring Clamp is easy to remove. Not only for storing all kinds of headphones, but also for headsets, glasses, and bags. The Wall Mount Hanger is made of a soft, non-abrasive plastic with a sturdy internal frame and will not scratch your headphones. It is easy to install with included screws. The holder can be mounted on any surface you want. Small design saves more space. The holder is made of a material that is light. The headphone stand has screws that hold it in place. It's suitable for all kinds of headphones and earphones, such as wired headphones, wireless headphones, PC gaming headphones, TV headphones, wired earbuds, wireless earbuds, and wireless earphones. It can be mounted on any flat surface you want, such as desk legs, cabinets, shelves, wall and glass. It can be mounted on any panel. Such as on a desk. Clean the surface by using wipes.

Brand: Enbiawit

👤I like this product. The hook is mounted to the wall. I have it to the left of the white wall switch. There is a The hook is large enough for any headphones. Simple white hook design looks nice mounted to the wall. There are holes for the anchor in case you need more. I was worried that the hook would be too small for Airpod Max, which is a sort of wide mesh top. It's a perfect fit, but can probably fit any other headphones. I don't use the feature, but I like that it has additional holes for holding airpods or ear buds. All in all, what I wanted.

👤I use a HyperX Cloud Stinger for work. I have an ikea desk. I stuck it to the side of the Alex drawers. It feels very sturdy and holds up well. I'm not going to pull this off unless I pull as hard as I can. There is a The HyperX is wireless, so I don't have cables to mess with, but it looks like you could wrap the cables around the front lip of the hanger. There are slots where you could keep earbuds. All of them were very happy with my purchase.

👤I got this for my headphones. I wanted to keep them away from my son. I like the idea that you can use this to store a variety of headphones, including gaming headphones, airpods, tv headphones, and your regular music headphones. I think my only complaint is that the 3M glue that I used on my wall did not hold up as well as I would have liked, the part that was sticky stayed on the plastic and the rest of the glue was on the wall. I tried applying the command strip to the sticky part but it didn't work. I was able to remove the sticky part from the plastic and get the glue off the wayy with no damage or problems, and I placed the command strip on the plastic to the wall, and it has been up there with no problem. If you're going to purchase this, you should take into account something, like command strips. I need it and it works just as I need it. My headphones are out of the way now.

👤My desk is not cluttered because my headphones are held for work. They are a good purchase.

👤It's very easy to install and fit, I screwed it into a stud and it's not going anywhere.

10. Headphone Universal Sennheiser Audio Technica Controller

Headphone Universal Sennheiser Audio Technica Controller

The package weight was 5.15 lbs. Easy access to your headphones. The long curved support is made of a soft, non-abrasive Silicone cover with a sturdy internal frame. A multi-purpose hanger. It's great for hanging cables, earphones and other gadgets. The max total weight is 1 kilogram. Clean and organized space. Installation is virtually anywhere - on walls, cabinets, glass surfaces, monitors, desktop towers, etc. You should organize and tidy up your workspace. Convenient installation. It uses double-sided tape for strong, reliable adhesion. Clean surface well using provided wipes. Allow the holder to be used for 24 hours. It is not suitable for use on wet, greasy or dusty surfaces.

Brand: Avantree

👤It worked well for a while. One day, I walked into my room and heard a noise. I was trying to figure out what fell, but realized it was my headset. I followed all the directions after having it for less than 3 months. I pressed the alcohol wipes against the sruface to make the surface clean. After hanging it up, I made sure to not use it for 24 hours. It still fell despite all that. They need a better stand. I'll probably buy something to keep it. It was unfortunate it didn't hold up. There is a Customer service contacted me saying my previous 2 star review was detrimental to their reviews. They gave a free replacement. If they think the 2nd will hold up, I'll change the review. I'm not going to change my review if the second product does the same thing as the first. They asked me to send the email back to them, after they lost the previous messages. I did. They responded with nothing relevant to what happened before. I'll take it down to just 1 star now that I know their customer support isn't helpful. This isn't worth the headaches if you buy it from someone else. There are two edits, the first one is called Edit 2. I bought my own double-sided tape and it seems to be holding up well, so it's 3 stars. Customer support is very determined to make sure I like their product. I didn't use the new one because I was expecting the same thing to happen. If you rely on the glue, then you should buy any other glue.

👤I bought this item on December 13th. The stand has begun to separate from the glue. I was expecting this accessory to last as long as I thought it would. I had thought I would get at least 6 months out of it, considering the brand of glue they chose. I always took care to place things on it gently. The back of the rubber/plastic hanger and the desk it is attached to have begun to separate from the glue that is attached to them. The stand was rated 5 out of 5 for its function and 2 out of 5 for its longevity. Customer service was 10/10.

👤I used to get different types of L-shaped things. I changed my mind after reading reviews about people getting dents in their headsets. There is a This thing is awesome. Stick to a wall and it will hold up a heavy, wireless, headset. I attached one to a desk as well. I picked up a set of two for a very competitive price and was happy to return for more, and they were even cheaper. I can't say for certain, but I can say that you get your money's worth. There is a If you feel like you have a heavy headset and need more support, you can get a double-sided mounting tape. There's enough here to support 20 lbs of weight, and 3M makes the absolute best. The back is large enough to double the amount of tape holding up whatever you're trying to hang on the rounded mount. It's cheap for the amount you get.

11. Latom Foldable Hanging Aluminum Headphones

Latom Foldable Hanging Aluminum Headphones

One holder for all is designed to hold your game controllers and headphones in one place. The heavy duty folding hooks are made from aluminum. The coat hook is 78 x 26 x 71mm/ 3.07 x 1 x 2.79 inches and the screws are 25mm long and 8mm in screw head diameter. You can use these folding wall hooks to hang dresses, clothes, headsets, and hats in different places, such as bedrooms, bathrooms and closets. The hanging hook has a smooth edge that will not damage your clothes or items you hang on. The folding hooks are very easy to install. The hooks are reinforced with 2 screws. The folding hooks are very easy to install. The hooks are reinforced with 2 screws.

Brand: Latomex

👤If you are looking for an item to see your nerdiness, then these are the ones for you. Your headphones are mounted on your wall as if they are a trophy buck. If you want to impress the ladies, you should show off those beautiful headsets. The folding mechanism makes them disappear like your father when you were a child.

👤I had the idea to hang my headphones and a bunch of stick on hooks, but they came up a few times. This one gives value. There is a 5 piece package out there, but this one of 4 costs less. It is made of metal. It falls down. It's about 3 inches or something like that. Comes with screws. I have 6 headphones on the wall. It will work for any hook of that size. I can flip the doors up when they're not in use. You don't need to search for hours to spend 10 bucks.

👤The Greekia version of these are twice the price, and they are fantastic. I was trying to save money, and so I ordered these, and two of them fell apart and opened up. There is no way to put the pins back together after the plastic came out from under the metal lip. The two that were usable were from the four pack.

👤I didn't want to spend more than a few dollars for a mount for my controller. The official ones go over 15 dollars but are not worth it. I found these for a lot less than I expected. If I had bought a headset mount and controller, it would have cost me 30 dollars and I would have had to pay 6 dollars for it. It worked out great.

👤Nice idea, nice design, poorly executed with cheap materials. I received more than I wanted because I marked the box twice. I have replaced one of them three times now. They hang partially open after install, as they no longer flip back to their original position.

👤I bought these brackets to hold my gym gear. They're easy to fold when not in use. The brackets can hold a lot of weight. My opinion is over 10 lbs. They would be great for hats and jackets.

👤I needed a couple of hooks for my headphones and for the price, I got this kit of 4. There is a This is a bargain and it is sturdy. One of them holds their guitar by a strap for weeks without a problem if you use the correct screws. The elbow part is strong and will hold pounds and pounds of load, but the folding design may be deceiving, as it is more of a mechanical design.

👤The metal is easy to open and close, and it stays closed when closed. It's a good size to fit big things.

Summary

What is the best product for headphone wall hanger pack?

Headphone wall hanger pack products from Latomex. In this article about headphone wall hanger pack you can see why people choose the product. Linkidea and Heneng are also good brands to look for when you are finding headphone wall hanger pack.

What are the best brands for headphone wall hanger pack?

Latomex, Linkidea and Heneng are some of the best brands that chosen by people for headphone wall hanger pack. Find the detail in this article. Apphome, Apphome and Elhook are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com