The wood wall hooks are easy to install. The coat hooks can be mounted to the wall by beginners. It is recommended to use a drill with a small diameter. There are aluminum alloy wall mounted coat hooks that you can use to organize and tidy your home. You will no longer have to go through the house to find your stuff with wall mounted coat racks. It's made of lightweight but sturdy aluminum alloy and can be used at your bathroom and kitchen. You can adjust the distance between the hooks according to the situation, come with 2 screw caps, and cover the holes for a flawless look. These hooks can be mounted in a variety of places, such as bedrooms, bathroom, closets, kitchen, pantry, entryway and garage for hanging robe, coat, hat, backpacks, keys, bags, kitchen supplies and more. If you have a question about their items, just send them a message and they will help you solve the problem. If you have a question about their items, just send them a message and they will help you solve the problem.
👤The rack allows for infinite adjustments. I had to use my own screws because the ones supplied are too short. A good product.
👤The reviews are small and the hooks are small. It won't work for coats.
👤I put my hair tools on it. Flat iron, curling iron, etc. It is sturdy and great. Love it.
👤It is kind of flimsy.
👤We use these on the hottub fence. They work well.
👤The first time I ordered this, it was scratched, so I sent it back for a new one. I didn't realize that one of the replacements only had 4 hooks, but it was installed. These are clean looking and get the job done, even though one star lost for that. They fit in the space we have.
👤It was easy to hang. The price is great.
👤I put one by the front door for coats, hats and other items, and another by the bathroom. If you have a heavy coat or purse, you can use 2 hooks for it, because the hooks are able to slide. It was installed in about 5 minutes.
Two preset heights give you maximum control over the level of your computer screen to improve posture and prevent neck and back pain. There is a notice. It is not possible to use it for painting a wall. If you paste to the wall, it will fall down. Make sure the surface is smooth, dry and oilless, and hang your headphones after 24 hours to make sure the hanger is firmly stuck. 500g is the max total weight. The headset holder with a magnet can be used when it is not in use. The arm of your headphones is covered with a soft rubber pad to protect it from slipping and scratching. The headphone hook has a strong sticky design, which can be applied to any smooth and clean surface. Hold your earphone in a firm position. Remove the sticker and stick it under your desk. It's great for hanging cables, hats and other gadgets to the kitchen counter, bookshelf, studio and company. A multi-purpose hook. The under desk mount is compatible with almost all wired and wireless headphones.
👤Does what it says it does. No issues.
👤I like the design. It's easy to hide and doesn't get in the way. It flips closed when you don't use it for headphones. It was easy to install, just remove the paper from the device and stick it on the spot you want it. The second adhesive pad they sent will help if The adhesive ever wears out. Overall, a great purchase, it does what I wanted it to do.
Universal under desk design allows for a near universal fit on most desks. There is a new word for it. The Spring Clamp is easy to remove. Not only for storing all kinds of headphones, but also for headsets, glasses, and bags. The Wall Mount Hanger is made of a soft, non-abrasive plastic with a sturdy internal frame and will not scratch your headphones. It is easy to install with included screws. The holder can be mounted on any surface you want. Small design saves more space. The holder is made of a material that is light. The headphone stand has screws that hold it in place. It's suitable for all kinds of headphones and earphones, such as wired headphones, wireless headphones, PC gaming headphones, TV headphones, wired earbuds, wireless earbuds, and wireless earphones. It can be mounted on any flat surface you want, such as desk legs, cabinets, shelves, wall and glass. It can be mounted on any panel. Such as on a desk. Clean the surface by using wipes.
👤I like this product. The hook is mounted to the wall. I have it to the left of the white wall switch. There is a The hook is large enough for any headphones. Simple white hook design looks nice mounted to the wall. There are holes for the anchor in case you need more. I was worried that the hook would be too small for Airpod Max, which is a sort of wide mesh top. It's a perfect fit, but can probably fit any other headphones. I don't use the feature, but I like that it has additional holes for holding airpods or ear buds. All in all, what I wanted.
👤I use a HyperX Cloud Stinger for work. I have an ikea desk. I stuck it to the side of the Alex drawers. It feels very sturdy and holds up well. I'm not going to pull this off unless I pull as hard as I can. There is a The HyperX is wireless, so I don't have cables to mess with, but it looks like you could wrap the cables around the front lip of the hanger. There are slots where you could keep earbuds. All of them were very happy with my purchase.
👤I got this for my headphones. I wanted to keep them away from my son. I like the idea that you can use this to store a variety of headphones, including gaming headphones, airpods, tv headphones, and your regular music headphones. I think my only complaint is that the 3M glue that I used on my wall did not hold up as well as I would have liked, the part that was sticky stayed on the plastic and the rest of the glue was on the wall. I tried applying the command strip to the sticky part but it didn't work. I was able to remove the sticky part from the plastic and get the glue off the wayy with no damage or problems, and I placed the command strip on the plastic to the wall, and it has been up there with no problem. If you're going to purchase this, you should take into account something, like command strips. I need it and it works just as I need it. My headphones are out of the way now.
👤My desk is not cluttered because my headphones are held for work. They are a good purchase.
👤It's very easy to install and fit, I screwed it into a stud and it's not going anywhere.
One holder for all is designed to hold your game controllers and headphones in one place. The heavy duty folding hooks are made from aluminum. The coat hook is 78 x 26 x 71mm/ 3.07 x 1 x 2.79 inches and the screws are 25mm long and 8mm in screw head diameter. You can use these folding wall hooks to hang dresses, clothes, headsets, and hats in different places, such as bedrooms, bathrooms and closets. The hanging hook has a smooth edge that will not damage your clothes or items you hang on. The folding hooks are very easy to install. The hooks are reinforced with 2 screws. The folding hooks are very easy to install. The hooks are reinforced with 2 screws.
👤If you are looking for an item to see your nerdiness, then these are the ones for you. Your headphones are mounted on your wall as if they are a trophy buck. If you want to impress the ladies, you should show off those beautiful headsets. The folding mechanism makes them disappear like your father when you were a child.
👤I had the idea to hang my headphones and a bunch of stick on hooks, but they came up a few times. This one gives value. There is a 5 piece package out there, but this one of 4 costs less. It is made of metal. It falls down. It's about 3 inches or something like that. Comes with screws. I have 6 headphones on the wall. It will work for any hook of that size. I can flip the doors up when they're not in use. You don't need to search for hours to spend 10 bucks.
👤The Greekia version of these are twice the price, and they are fantastic. I was trying to save money, and so I ordered these, and two of them fell apart and opened up. There is no way to put the pins back together after the plastic came out from under the metal lip. The two that were usable were from the four pack.
👤I didn't want to spend more than a few dollars for a mount for my controller. The official ones go over 15 dollars but are not worth it. I found these for a lot less than I expected. If I had bought a headset mount and controller, it would have cost me 30 dollars and I would have had to pay 6 dollars for it. It worked out great.
👤Nice idea, nice design, poorly executed with cheap materials. I received more than I wanted because I marked the box twice. I have replaced one of them three times now. They hang partially open after install, as they no longer flip back to their original position.
👤I bought these brackets to hold my gym gear. They're easy to fold when not in use. The brackets can hold a lot of weight. My opinion is over 10 lbs. They would be great for hats and jackets.
👤I needed a couple of hooks for my headphones and for the price, I got this kit of 4. There is a This is a bargain and it is sturdy. One of them holds their guitar by a strap for weeks without a problem if you use the correct screws. The elbow part is strong and will hold pounds and pounds of load, but the folding design may be deceiving, as it is more of a mechanical design.
👤The metal is easy to open and close, and it stays closed when closed. It's a good size to fit big things.
The package weight was 5.15 lbs. Easy access to your headphones. The long curved support is made of a soft, non-abrasive Silicone cover with a sturdy internal frame. A multi-purpose hanger. It's great for hanging cables, earphones and other gadgets. The max total weight is 1 kilogram. Clean and organized space. Installation is virtually anywhere - on walls, cabinets, glass surfaces, monitors, desktop towers, etc. You should organize and tidy up your workspace. Convenient installation. It uses double-sided tape for strong, reliable adhesion. Clean surface well using provided wipes. Allow the holder to be used for 24 hours. It is not suitable for use on wet, greasy or dusty surfaces.
👤It worked well for a while. One day, I walked into my room and heard a noise. I was trying to figure out what fell, but realized it was my headset. I followed all the directions after having it for less than 3 months. I pressed the alcohol wipes against the sruface to make the surface clean. After hanging it up, I made sure to not use it for 24 hours. It still fell despite all that. They need a better stand. I'll probably buy something to keep it. It was unfortunate it didn't hold up. There is a Customer service contacted me saying my previous 2 star review was detrimental to their reviews. They gave a free replacement. If they think the 2nd will hold up, I'll change the review. I'm not going to change my review if the second product does the same thing as the first. They asked me to send the email back to them, after they lost the previous messages. I did. They responded with nothing relevant to what happened before. I'll take it down to just 1 star now that I know their customer support isn't helpful. This isn't worth the headaches if you buy it from someone else. There are two edits, the first one is called Edit 2. I bought my own double-sided tape and it seems to be holding up well, so it's 3 stars. Customer support is very determined to make sure I like their product. I didn't use the new one because I was expecting the same thing to happen. If you rely on the glue, then you should buy any other glue.
👤I bought this item on December 13th. The stand has begun to separate from the glue. I was expecting this accessory to last as long as I thought it would. I had thought I would get at least 6 months out of it, considering the brand of glue they chose. I always took care to place things on it gently. The back of the rubber/plastic hanger and the desk it is attached to have begun to separate from the glue that is attached to them. The stand was rated 5 out of 5 for its function and 2 out of 5 for its longevity. Customer service was 10/10.
👤I used to get different types of L-shaped things. I changed my mind after reading reviews about people getting dents in their headsets. There is a This thing is awesome. Stick to a wall and it will hold up a heavy, wireless, headset. I attached one to a desk as well. I picked up a set of two for a very competitive price and was happy to return for more, and they were even cheaper. I can't say for certain, but I can say that you get your money's worth. There is a If you feel like you have a heavy headset and need more support, you can get a double-sided mounting tape. There's enough here to support 20 lbs of weight, and 3M makes the absolute best. The back is large enough to double the amount of tape holding up whatever you're trying to hang on the rounded mount. It's cheap for the amount you get.
Only a few steps are needed to fix this utility hanger onto the wall. The wooden hooks surface is made from beech wood and has a smooth finish and water resistant wood wax oil. The small hook is capable. The size is 1.37 inches. Solid wood construction with hardware. Heavy duty backpacks, winter coats, and other items can be held by the wood hooks. The L-shaped design holds things in place. It holds everything in one place and never falls off. The wooden wall hook is useful to organize things around the house. It can be used to hang coats, scarves, hats, and handbags in the entryway, as a indoor plant hanger in the hallway, or as a hanging place for clothing in the bedrooms. The wooden pegs can hang purses, raincoats, umbrella, headphone, dog leashes, guitar and other random things. The wooden hooks come with a step-by-step manual and 6 screws. The hat hook can be mounted on the wall. It is better to use a drill with a diameter of less than.03 inches to drill in the wall if you install according to the manual. 100% satisfaction with the service. Please contact them if you have any questions. If you are not completely satisfied with the Home Decorative Pegs, they will give you a refund or exchange. If you like it, please give them a chance to prove it. 100% satisfaction with the service. Please contact them if you have any questions. If you are not completely satisfied with the Home Decorative Pegs, they will give you a refund or exchange. If you like it, please give them a chance to prove it.
👤The hooks are easy to install and I love them. I did not use the wall anchors because they are only holding up hats.
There is a 2 year satisfaction guarantee forValuable gift for Christmas, Thanksgiving day, Easter, Birthday, Valentine's day and more. Hook can hold up to 10 pounds. The heaviest headphones weigh about one pound. 3M VHB tape is used to adhere the aluminum material and soft silicone pad. One headphone hanger with 3M VHB tape. mounting on computers, desk and wall is durable.
👤The frame doesn't bend without some force applied to it. The color of the product is great, but it doesn't scratch easily, like some other products that will scratch and ruin the look. Installation is the easiest thing in the world, stick to the spot, good to go. There is a There are pros and cons. My circumstance doesn't allow me to use the provided screws to install the hook. I bought this product because it came with a sticky pad. I have headphones that are not much heavier than the ones I use. The sticky pad didn't stick for long. It may have started peeling away from where it was placed a week before. I thought it might have been a mistake, but it wasn't. It's a very simple fix, I just bought better double sided tape and I haven't had an issue with it after that. I had to go out of my way to make it better, so I had to dock it some stars. That may be useful information for some people. The tape was not very good, but I am happy with the rest of the product. There is a This style of hook is perfect and many prefer it over the above desk ones. If you are able to do that even better, the color doesn't chip away, and the material comes with screws if you are able to do that, I would recommend this product over others. If you plan on using it that way, you should install a better quality double sided tape.
👤I didn't expect the glue to bond to my desk to be welded on. I am either weak or it has its own pull that was reinforced using superglue. It's important to plan where it's going to stay.
👤I put this under my desk with the 3M double sided pads. It is small but works for my G930's. The material is very strong. There is a The best part is that they included small clips. I was able to run the charging cable cleanly underneath my desk. There is a Overall happy. It was a bad deal for the quality.
👤I stuck it too close to where my legs were, and it would occasionally hit me. It sticks very well if it does what it's supposed to. The HyperX Cloud II headset is in place.
👤I can't stand the amount of stuff on my desk. I did not want a headphone rack because it was at risk of being knocked over. The metal is heavy for its purpose and won't bend. The mounting tape did not work. I used the screws that came with it. It was kind of annoyed. I didn't want to put holes in my desk. Overall happy with it.
👤The purpose of it is to serve as a headphone hanger. It is made of aluminum and feels sturdy. The only reason I'm giving it two stars is because it's not as advertised. There are 4 holes in the hook. Two (2) are located in the center of the hook and two (2) are located towards the top of the hook, which has slots to allow sliding the hook onto screws. I don't care if it's not what I ordered, since it does its job and I don't see it under my desk.
What do you think about wood hooks? Hat hooks for wall? Is there coat hooks for the wall? A coat rack on the wall? A towel hook for the bathroom? How about wall hooks for hanging things? The choice is yours. The set of wooden hooks is multi-functional, unlike metal wall pegs. It can be used as a wall hook for coats, hat hooks, and all you can imagine. They can be placed in your bathroom, bedroom, entryway and more. The L-shaped design of their wood wall hook makes it a thoughtful design. Everyone will love the design of these wall hooks. Black walnut wood is handcrafted with great value and quality. Their wooden pegs are strong and can hold heavy items. You'd be surprised at how pleasant the wood pegs are. The wood wall hooks are easy to install. The coat hooks can be mounted to the wall by beginners. It is recommended to use a drill with a small diameter.
👤These look great. I should have paid more attention to the poor quality of the mounting hardware. The screw diameter is too large for most wall anchors to hold tightly to the wall and they loosen to the point they do not secure tightly to the wall. They look nice, but they are not functional for our use. I wouldn't purchase these again. All the best.
👤These are some nice hangers. There is a I was looking for ways to hang a number of devices for easy access in the Man Cave. There were still things that needed hanging after being satisfied with other products. Something bigger than the small pegs that fall off of my hats. I tried these wall pegs. Installation was simple, but complicated by my mistake in drilling a large hole for the first one. I used one of the 50lb screw-in anchors I had laying around, which fit the supplied screw as well as the original did, to correct the problem. You drill a hole, hammer in the molly, and screw in the peg. The pegs had a rough finish around the front edge, but a quick hit with some sandpaper and some olive oil fixed that. The finish was excellent and the color is lovely. They're made of solid wood, and appear to have a natural finish, so I expect them to wear well and recover from any scratches/misuse with some furniture polish or oil. The ends are endgrain, not caps, as some similar products seem to have. They weren't perfect, but neither was my drilling, and they were well worth the low cost to obtain and low effort to install securely. They hold my hats well. I nearly gave up hope of using the two shelf supports in the space between them. They are even more attractive when they are exposed. There is a I have two pegs that are too tight for those multi-peg boards, and are in view so there is no utility hooks like in the basement or garage. I would use these in the living room if I needed to.
👤The product's anchors didn't work right. The photo on the left is of the hooks. The photo on the right is of an anchor and it worked well. The supplied anchors may have worked if my drywall was larger. The tabs on the anchor's shaft did not grab the inside of the hole, but the anchor spun around as I tried to install the hook. I used the anchor I purchased at the hardware store. I was able to install it. There is a difference between the collar and the fin at the anchor's shaft. The fins keep the anchor from spinning after it is gently tapped into the hole. The screw shown at the top of the photo was used to anchor the anchor inside the wall. The screw at the bottom needs to be removed before the hook can be put into the wall. The manufacturer should not suggest that the supplied anchors will work with no modifications. Show different photos of different methods of installation. Once installed, these hooks will work well.
It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc. Small and foldable design saves space. It can be used to free your desktop from chaos. Safe and Stable: The headphone stand has strong glue that will allow it to last a long time. The materials are high-quality. The rubber pads on the headband protect it from wear. All kinds of headphones, such as wired headphones, wireless headphones, gaming headphones, TV headphones, and so on, are suitable for the universal headset holder. It's easy to install and can be mounted anywhere. On computers, desk, and wall. Clean the surface by using wipes.
👤I was very happy with my purchase of this headphone holder, but it has been a year since I purchased it. I noticed that my headphones got in my hair when I noticed the odd goop on the bridge. The pull out bracket that my headphones rested on was the culprit. I was able to use alcohol wipes to remove all of the liquified glue and I was also able to repair the small pad that locks the brackets in the closed position with some automotive grade 3M double sided tape. Hopefully it will hold up better than what was used to assemble it. Is this the end of the world? I am going to keep an eye on it because it was a quick repair.
👤I have a charging station in my laundry room. The hug makes it look less cluttered and it gets a lot of stuff off the counter. I charge a lot of stuff on this station. The double sticky tape is used. I made it even more solid by attaching a couple screws to the holes. Unable to keep earbuds and headphones off the countertop while charging. If you don't have anything to hang on it, this is a great option. I'm very happy with the space that was cleaned up.
👤The option to screw it into your desk is what I bought this hook for. I tried the glue before I tried to put it in. I had low expectations, but the sticker is so strong that it's like a combination of Ultimate Warrior and Hulk Hogan. I'm thinking about buying another one for my towels.
👤My father built a desk for me that is solid wood. It was built for writing, not a computer. I used the glue that came with the product because I couldn't drill a hole in it. I have a very light-weight Sony headphones, but they haven't budged over a month. The hook portion is large and padded to not damage my headphones. I might put two different pairs on there. I love that when I move this desk, I can just close the hook and it won't be a problem. There is a The metal is heavy and shiny. It's a good addition to my desk. I wish it didn't have the logo, but it is perfect.
👤Unfortunately it did not last. It fell off my wall in the middle of the night, luckily it didn't break my headphones, I was sleeping. It was loud. I might use it on a wood surface with screws to hold it up instead of giving it to someone else. Holds fast to painted plaster. I've considered buying another one just for the tape. It has been on the painted plaster walls for a long time. It holds my headphones and doesn't bang when I place them down. The inside of the "hook" is made of some kind of material. It doesn't open without you meaning it to.
👤This is what it seems to be. I thought it would be bigger but it is not. I used the two screws instead of using the glue to stick to the wall. I would have been concerned that the headset wouldn't hold it's weight. There is a This looks great on the wall. When I moved my console, I realized I lost the space I wanted for the headset stand and that's when a hanging stand became optimal. This is in front of my console. It's difficult to pull it down when it's folded up, because you don't have headsets on. I think that will loosen over time with use and shouldn't be a negative.
It's comparable and it has a warranty. Most headphones and gaming headsets are compatible with this. To make sure their stand is compatible with your headphones, please check the dimensions of the headset bed and the width of your headband. A nice combination and sufficient quantity can satisfy your different demands, and you can share them with your friends. The headphone hook is practical and light, it is a good way to tidy up your desk, it will save space, and you can use it when you're not using it. The headset holders are made of quality acrylic, which is durable and firm, not easy to break, and the black foam pad design protects your headband headphones from wear when suspended. You can give these hooks to your friends as a present, because they are universal, and they are suitable for various kinds of headphones. They are easy to install with matched quality tapes, and you can stick them to anywhere you want.
👤I can't peel the plastic 3M label, so they may have changed what's used to adhere to the wall. I can't peel the covering on my long finger nails because I have a long nail. I've given up trying to get that off. I will try to use a command strip. The whole thing is brought up when I try to remove the protective label. See the picture. I was able to get that corner to peel off when I took the picture. It's very difficult to remove the protective label. It's very sticky and has 5 stars.
👤These are exactly what you think they are and how they appear in photos. They're very simple pieces of bent plastic with a thin layer of foam in the part that contacts the headphones, but they do exactly what they're supposed to do and so far, they've held my headphones without issue. They're an inexpensive choice that aren't the most aesthetically pleasing, but they do exactly what they claim and look like they do in photos.
👤These aren't strong. The first broke. All four were broken within a week. I ordered metal to be replaced. The headsets were only held by the children but they got some rough treatment. If you use alternate glue, it may work in another home.
👤I was excited when I bought this because my headsets will no longer be laying around. The glue didn't last long. I had to stick it back onto the wall after it fell again. I had to buy the ones that came with it instead of the ones that came with target. Since then, it has not fallen. I had to buy new tape for it because I think it's not worth the money.
👤It broke after catching on something and the hook came off. It took the paint off the wall.
👤I hung these with the headphones on. They are still tight and up. Prepare for missing drywall if you want to remove them.
👤It's pretty basic but useful. Does it keep my headphones off my desk? If you own wired headphones like I do, I would recommend getting cable clips that are waterproof to avoid having to loop the headphones around.
👤It's good to hold up well so far, just make sure to follow the instructions on how to clean the surface and give the glue time to stick.
👤I didn't know how to put my first 1 on. There is a I stuck it to the wall and then realized it was a tag. There is a I have a few headsets. I have a bag for my work at the side of the desk with a laptop and other bits. I bought them and they were very tough.
👤Works great for headphones and PS5 controllers. It might be a tad expensive.
👤Basic hooks are flimsy at the bend but I hope they survive. I will update if they don't.
👤These were used for the training room at work. They are easy to fix and good value for money.
For a full description, please scroll down. The coat hooks are made from aluminum alloy which is sturdy enough to hold heavy items, not easy to break and can resist rust and erosion, the screws are made of iron, it can easily hold up to 40 lbs of weight. These coat hooks can be folded. Open it when you use it. You fold it when you don't use it, which saves room space. The clothes hook is 70 x 77 x 2.5 inches, the screws are 30mm long and the wall anchors are 30mm long. The coat hooks are easy to install and can be mounted directly to closets or doors. The package includes coat hooks, screws, and hollow wall anchors. The package includes coat hooks, screws, and hollow wall anchors.
👤I wish I knew before ordering these that the color is a powder coat paint and that there is enough of a gap between the wall mounted half and the hook when folded up to allow screws that aren't. The ikea bjarnum folding hooks seem to be a ripoff of lack of spacing, which makes it hard for certain kinds of mounting screws to work.
👤Great hooks. I placed an order for more because we have kids that are clumsy and don't pay attention to where they are walking and often get their clothes on hooks but not on these. We have a lot of stuff and narrow hallways so they don't stick out when we aren't using them. The kids and I hang our backpacks on them with books or laptops and have not had any loose.
👤The coat hooks are amazing. I wanted something that was strong for storage items. These are the bomb, I found them on Amazon. When not used, they fold up. I put them in a storage area, pantry and garage. They are sturdy and can be folded up when not in use. They beat standard hooks. I can't recommend this enough. It was worth every penny.
👤The price is right and they look sleek. They look better than the hooks that cost 10 times more. It's cool that they fold away.
👤The intersection of style and practicality was hit by these. If you can find the studs in your walls, these are easy to hang. It's an easy way to increase your options. A mounted coat rack is 10x classier looking and 3x more useful. Also takes up less space. I will order more as soon as I decide on the color. The black I have looks good and modern, but I think the other colors would be equally good. I've had a lot of things hanging on these that have been taken off and put back on regularly. My bag of tools, my backpack, and a heavy duffel bag are all stuff. I can't say enough good things about these hooks. Anyone who likes a modern look and is pressed for space will find value here.
👤I got four of these for my laundry room. If I'm in there, I just flip it open and hang up my clothes. I like to pull my clothes out of the dryer at a time so I don't have to iron them. The 4 of them hold a load of laundry. I don't remember if I needed longer screws for this one. I usually swap out the screws that come with them to make sure they sink into the stud. Even when I hung multiple heavy jeans and jackets, they stayed put. Hope this helps.
👤I hang my headsets on the wall board. The cheap hooks broke from the weight. These replacements are very strong for holding anything from jackets to headsets and towels. They pull down with ease if needed. Nice feature added. I think they show the keys hanging on one. A normal sized keyring won't fit over the end of these. Something to think about.
Headphone wall hanger wood products from Minalce. In this article about headphone wall hanger wood you can see why people choose the product. Lamicall and Enbiawit are also good brands to look for when you are finding headphone wall hanger wood.
Minalce, Lamicall and Enbiawit are some of the best brands that chosen by people for headphone wall hanger wood. Find the detail in this article. Latomex, Avantree and Crswha are also brands that their products are worth to check.