There is a package list and reliable warranty. MAONO products have a 12-Month warranty. The Universal Game Controller HOLDER WALL MOUNT works with most third party game controllers. The angle of their hanger has made it possible to reduce the scratches on your wall and controller. The Universal Headphone Hotline: The wide and curved seating bed is suitable for almost every type and size of gaming headphones. The headband will not fall off if the bed is curved. SECURE INSTALLATION Their Universal Game Controller & Headphone hanger mount can be installed almost anywhere, it comes with 3M VHB tape pre-fitted and can be installed on desks, shelves, cabinets, glass surfaces, rear of the TV/monitor, and many more. VHB is used by GoPro to secure their cameras during extreme activities so you can be sure it won't let you or your controllers down. The max weight limit is 1.5 kilogram. Hang your controllers and headphones out of the way so that they don't get damaged and keep your game space free and organized. A universal design to hold both your game controller and headphones in one place looks stylish and is held securely.
👤The price is hard to understand because it is 3D printed. I have seen some issues in other reviews, but it seems like it's attached to me. It's the kind of glue that if you're not careful, you can damage the wall. There is a When people complain about the failing of the glue, the easiest answer is to clean the wall and let the glue cure for 24 hours under no load. I haven't been using it for a while. If it fails on me, I will update this review. The controller and two pairs of headphones are still on the wall 10 months later. Don't be lazy, clean your wall and let it cure for 24 hours, it will stay.
👤I use this for my PS5 controller. I have had trouble with it sticking to the wall. It fell off a couple of times, which is concerning since I have very expensive accessories on it. I put more tape on it, but I am not sure how long it will last. There is an update. After it fell the first time, I secured it with tape, but it fell again and took some of my wall with it. I have to go with a no on this one.
👤After about a month of use, the glue started to come loose and I had to make a mount for it on the wall. If you want to have one of your own, you can just look up the file to print it. I think it works as well as it costs.
👤This product looks cheap, and that is the only flaw I can see. It's not the most attractive way to make something like this, but the simple design is elegant enough that you won't be ashamed to hang it on your wall. It looks like any other plastic hanger once you put a pair of headphones and a controller on it. The small hook on the back of the hook is easy to use, and the second hook on the top can easily support a coiled-up headphone cord or controller wire. The hook on the back is not big enough to hold a coiled cord. It might be able to fit both a controller cord and a headphones, but that would be pushing it to the limit, so if you need space for both, this might not be the product for you. There is a The glue is strong and has held up well. I tested it by applying some extra weight and had no problems with the hanger or the glue. It's a permanent home for my headphones and controllers, and it's not showing any signs of weakness. Some reviews have said that the glue didn't work. It's possible that some people got a bad case, but I would point out that it's necessary to clean the surface before applying the hanger, and that you need to wait until it's completely dry. It will work for you if you don't mind that it looks like a piece of plastic.
The foldable design is space-saving. The arm can be folded up if it isn't being used. The raised final arm has a rubber strip on it. The arm is large enough to fit all kinds of over- ear headphones. The kit is convenient to store and reach your headset. Comes with a cable clip. The cables are dragging on the ground. The cord holder can be applied to any type of setup. Give your desk back and use it to create a killer gaming environment. Soft curved rubber landing pad holds your headset well and won't cause any damage to its foam headband. The raised part is supposed to prevent headphones from falling. Made from solid aluminum is durable and sturdy. 60-day money back and a 12-month warranty are included in the Quality Assurance and After-Sales Service. If you have a question, please contact them. If you need more firmness, you can mount the headset hanger with screws or strong 3M VHB two-sided tape. Loadable 3.3lb with tape and 33lb with screws. It's suitable for any flat surface such as PC, desk legs, cabinets, shelves, wall and glass. It can be used anywhere you like.
👤You think you don't need this product until you buy it. I don't like having to put my headphones in a container every time I use them, and I don't like having to take them out. I didn't like leaving my headphones out to collect dust and suck up space inefficiently. I decided to give this product a try. I love it. It's simple, elegant and very versatile. I was worried that it wouldn't fit on the front side of my desk. It was easy to fit to the legs of my table because you can adjust the hook's direction. It will still collect some dust, but it will be less than under something. This product is great for anyone looking for storage items.
👤I didn't want a stand on top of the desk as there was not enough room for one without my desktop getting crowded. I was looking for a hangar that I could hang on the inside of the frame, so that it wouldn't stick out to pedestrians. There is a This hangar is perfect. It seems to be well made and sturdy, has pads so as not to damage the desk frame, and it has more than enough adjustability to accommodate thicker desk frames/tops. I like the clips to hold my headphones, it's nice to be able to roll it up and stick it in without having to worry about the wire getting loose. There is a My cable-managed PC station has a new addition.
👤I bought a new headset for my computer. I picked it up. The rubber coating on the ledge helps keep the headband from sliding around. It has a lip at the end that helps to keep your headset from sliding off of the end. I had a similar stand for my headset, but it didn't have either of these features. I decided to replace the stand for my console headset after I thoroughly enjoyed the new one. I like that the stand can be folded up when not in use. I would highly recommend this stand if you were thinking about getting it.
👤I attached this to the leg of the table that I use for my computer desk to free up space for my headphones. I like the fact that the mount can be turned so that it can be mounted vertically or horizontally. The screws/screw holes/allen wrench are not up to snuff. The allen wrench takes a little work to get into the screw heads, and the screw holes seem to be off-level. The screws are not in a straight line regardless of orientation. It is very odd. I am able to change the orientation of the mount without a problem, and once mounted it is not coming off the table's leg until I remove it. I am very satisfied that it mounts firmly. It's probably too much for the headphones I am using, but that's not my main concern. I'm happy that I can keep my headphones plugged into my computer and have them tucked away, so I can use them whenever I want.
The stand is made of high-quality aluminum. The PS5 PS4 Xbox one controller, desktop computer game handles, and most game controllers are compatible with the handle and headset hook brackets. The transparent patch and screw method is suitable for installation in any place-table, shelf, cabinet, glass surface, and so on. Product dimensions are 3.14 x 1.57 inches. The package has headphones stand X 1.
👤The controller does not provide proper support.
👤It's easy to install. It's high quality. The mount is made of solid metal with a black coating, but the brackets are plastic. It's easy to install if you have a 9 year old. The mounting system is strong. It works perfectly with the Xbox X/S controller.
👤The controller is too small to hold this small accessory. We didn't install it before trying to balance it. The pictures of the product were not real. Returning.
The folding hooks are very easy to install. The hooks are reinforced with 2 screws. There is one controller. The person is named Holder. The MoKo controller has the ability to hold two controllers and a headset. As controller holder and also as a stand for headphones. Their controller holder is compatible with universal gamepads, such as the Xbox One, XBOX One, XBOX 360, PS3 and PS4. The stand is suitable for universal headsets. Saving your space and money is important. The design of the storage for the game controllers and headset will keep your room organized. You don't need to buy another stand for your headset or game pads, saving you money now. The Switch controller holder is made of high-quality aluminum alloy and is strong enough to last a long time. No one is worried about its bearing capacity or being broken easily. You can install as you please. Their stand can be installed in two ways, by strong glue or screws, which will give you much convenience, just choose one way as you please.
👤The controller holder was easy to install and looks exactly like the product images. It holds both controllers. The wall mounted sticker was very strong, so it is important to be careful with installing it. Should you want to go that route, it also includes wall screws. It was a great bang for your buck.
👤My mom bought me a computer. This helps a lot. It was easy and worth it.
👤This product is terrible. Everything is made from cheap materials. The setup was difficult for something that should be easy and after setting it up it was not strong. I would recommend buying a controller from someone else. I was surprised that something so simple could be so bad. I hope no one else buys this so that they don't feel the same way I did.
👤BELLA IDEA! L'ho attaccato con 2 adesivi. senza dover bucare ilo muro, non avrei potuto per la presenza di un telaio scrigno all'Interno. 2 joysticks e le cuffie! There is a In ordine la scrivania di mio figlio, lo trovo. There is a Per mio figlio pi grande, lo acquister anche.
👤It looks great on my wall. The double face tape was easy to install. The rubber on the hangers helps to prevent scratches on controllers.
👤La staffa fa il suo dovere egregiamente. davvero is not a male.
If you have questions or are unhappy with your shopping experience, please contact them. Space saving and foldable. You can fold it up when not in use, and keep it neat and tidy. The headset hook is designed with a cable organizers to make it easier to organize your gaming/wire headphone cable. It can be used for hanging headphones. The aluminum material is strong and can be used for a long time. The raised edge of the wall mount can prevent headphones from falling off. It comes with strong 3M glue and screws, no glue needed, but holds securely, and it's not easy to fall off. You can use strong 3M VHB tape or reinforce with screws. More Than A Headphone Hook can be mounted on any smooth surface like a bookshelf, desk, table leg, cabinet, computer host, door, wall, etc. It is also available for hanging bags, file folders, keys, umbrellas, and other small items.
👤It says it's aluminum, but it feels very cold. The finish is black and I think it's type 3 anodized aluminum, the kind you'd find on a high end flashlight. There is no mark when you scratch the surface with ordinary objects. I had to use a sharp screw to make a mark. It's interesting for something stationary to have scratch resistance. There is a The hinge is strong. I tried to bend my spare backwards, but it wouldn't bend or warp. It could hold a jug of milk. The mounting point is likely to fail before the hinge does. I used screws directly into the sheetrock of the mount. My only suggestion to the vendor is to give us longer screws. The cable clip buttons help direct and organize the cable. The value was very high.
👤The product works well and is well designed. The reason for the low score was due to the fact that the brackets had only three screws for mounting, where four are required.
👤These little ladies worked well. I have a full studio setup in my home office, which means a lot of cords and headphones. These hold onto smooth/semi-rough surfaces perfectly. I will be buying more packs to manage cable around the house. Great stuff.
👤The package had missing hardware. The wall anchors and screws were not included in the photo. So disappointing. Had to return them.
👤I used this to hold up a pair of headphones. Waited a while before putting the weight on the brackets. After a few weeks, the glue failed. Very disappointing.
👤The material is strong. The cable organizers are working perfectly. Easy installation of strong 3m glue.
👤There are two great options for this headphones.
👤The build was good and past my expectations.
👤All metal is very well built, no wobble when folding it up. I used the sticky pads and screws to mount my desk and they seem to be stuck. You get two of them in a pack.
The package weight was 5.15 lbs. Easy access to your headphones. The long curved support is made of a soft, non-abrasive Silicone cover with a sturdy internal frame. A multi-purpose hanger. It's great for hanging cables, earphones and other gadgets. The max total weight is 1 kilogram. Clean and organized space. Installation is virtually anywhere - on walls, cabinets, glass surfaces, monitors, desktop towers, etc. You should organize and tidy up your workspace. Convenient installation. It uses double-sided tape for strong, reliable adhesion. Clean surface well using provided wipes. Allow the holder to be used for 24 hours. It is not suitable for use on wet, greasy or dusty surfaces.
👤It worked well for a while. One day, I walked into my room and heard a noise. I was trying to figure out what fell, but realized it was my headset. I followed all the directions after having it for less than 3 months. I pressed the alcohol wipes against the sruface to make the surface clean. After hanging it up, I made sure to not use it for 24 hours. It still fell despite all that. They need a better stand. I'll probably buy something to keep it. It was unfortunate it didn't hold up. There is a Customer service contacted me saying my previous 2 star review was detrimental to their reviews. They gave a free replacement. If they think the 2nd will hold up, I'll change the review. I'm not going to change my review if the second product does the same thing as the first. They asked me to send the email back to them, after they lost the previous messages. I did. They responded with nothing relevant to what happened before. I'll take it down to just 1 star now that I know their customer support isn't helpful. This isn't worth the headaches if you buy it from someone else. There are two edits, the first one is called Edit 2. I bought my own double-sided tape and it seems to be holding up well, so it's 3 stars. Customer support is very determined to make sure I like their product. I didn't use the new one because I was expecting the same thing to happen. If you rely on the glue, then you should buy any other glue.
👤I bought this item on December 13th. The stand has begun to separate from the glue. I was expecting this accessory to last as long as I thought it would. I had thought I would get at least 6 months out of it, considering the brand of glue they chose. I always took care to place things on it gently. The back of the rubber/plastic hanger and the desk it is attached to have begun to separate from the glue that is attached to them. The stand was rated 5 out of 5 for its function and 2 out of 5 for its longevity. Customer service was 10/10.
👤I used to get different types of L-shaped things. I changed my mind after reading reviews about people getting dents in their headsets. There is a This thing is awesome. Stick to a wall and it will hold up a heavy, wireless, headset. I attached one to a desk as well. I picked up a set of two for a very competitive price and was happy to return for more, and they were even cheaper. I can't say for certain, but I can say that you get your money's worth. There is a If you feel like you have a heavy headset and need more support, you can get a double-sided mounting tape. There's enough here to support 20 lbs of weight, and 3M makes the absolute best. The back is large enough to double the amount of tape holding up whatever you're trying to hang on the rounded mount. It's cheap for the amount you get.
It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc. Small and foldable design saves space. It can be used to free your desktop from chaos. Safe and Stable: The headphone stand has strong glue that will allow it to last a long time. The materials are high-quality. The rubber pads on the headband protect it from wear. All kinds of headphones, such as wired headphones, wireless headphones, gaming headphones, TV headphones, and so on, are suitable for the universal headset holder. It's easy to install and can be mounted anywhere. On computers, desk, and wall. Clean the surface by using wipes.
👤I was very happy with my purchase of this headphone holder, but it has been a year since I purchased it. I noticed that my headphones got in my hair when I noticed the odd goop on the bridge. The pull out bracket that my headphones rested on was the culprit. I was able to use alcohol wipes to remove all of the liquified glue and I was also able to repair the small pad that locks the brackets in the closed position with some automotive grade 3M double sided tape. Hopefully it will hold up better than what was used to assemble it. Is this the end of the world? I am going to keep an eye on it because it was a quick repair.
👤I have a charging station in my laundry room. The hug makes it look less cluttered and it gets a lot of stuff off the counter. I charge a lot of stuff on this station. The double sticky tape is used. I made it even more solid by attaching a couple screws to the holes. Unable to keep earbuds and headphones off the countertop while charging. If you don't have anything to hang on it, this is a great option. I'm very happy with the space that was cleaned up.
👤The option to screw it into your desk is what I bought this hook for. I tried the glue before I tried to put it in. I had low expectations, but the sticker is so strong that it's like a combination of Ultimate Warrior and Hulk Hogan. I'm thinking about buying another one for my towels.
👤My father built a desk for me that is solid wood. It was built for writing, not a computer. I used the glue that came with the product because I couldn't drill a hole in it. I have a very light-weight Sony headphones, but they haven't budged over a month. The hook portion is large and padded to not damage my headphones. I might put two different pairs on there. I love that when I move this desk, I can just close the hook and it won't be a problem. There is a The metal is heavy and shiny. It's a good addition to my desk. I wish it didn't have the logo, but it is perfect.
👤Unfortunately it did not last. It fell off my wall in the middle of the night, luckily it didn't break my headphones, I was sleeping. It was loud. I might use it on a wood surface with screws to hold it up instead of giving it to someone else. Holds fast to painted plaster. I've considered buying another one just for the tape. It has been on the painted plaster walls for a long time. It holds my headphones and doesn't bang when I place them down. The inside of the "hook" is made of some kind of material. It doesn't open without you meaning it to.
👤This is what it seems to be. I thought it would be bigger but it is not. I used the two screws instead of using the glue to stick to the wall. I would have been concerned that the headset wouldn't hold it's weight. There is a This looks great on the wall. When I moved my console, I realized I lost the space I wanted for the headset stand and that's when a hanging stand became optimal. This is in front of my console. It's difficult to pull it down when it's folded up, because you don't have headsets on. I think that will loosen over time with use and shouldn't be a negative.
The controller wall mount includes wall anchors, double-sided tape, and hard plastic for long operation life. The design makes it easy to reach your headphones. It was designed by the headphone manufacturers to have minimal long term indentation on your head band. The Brainwavz Cradle has a curved bed in order to better hold your headphones without leaving marks on your head band. The same 3M VHB tape, the same glue, and long term safety are what makes it secure. If you have to move the stand after placing it please use a hair dryer to warm up the pad and then remove it from the wall. The max weight is 1.5 kilogram. It's comparable and it has a warranty. Most headphones and gaming headsets are compatible with this. To make sure their stand is compatible with your headphones, please check the dimensions of the headset bed and the width of your headband.
👤I am only leaving this review because the complete description of the product does not state it is a 3D printed piece. The picture of a smooth finish piece made me think it was a mold injected plastic piece. I received a 3D printed item. I will keep it, but not what I wanted. I have a 3D printer and can tell it is from a FDM printer. For people who are interested. Black PLA is printed at 0.2 layer height. Wall count 6 is pretty impressive. Without breaking it, I can't tell. The printer could use some tl smoothers. There is a Again, I am only leaving a one star review because I believe I was misled about the product. I would have printed my own.
👤I was assuming it would be a sort of gloss finish based on the photo on the product page. I received a pack of raw-finish-looking 3D printed headphones. It's not the most appealing look for the product, but they do their jobs well, and anything else would be better. It's easy to miss that this is not a smooth finish, even though the photos depict it. I can't recommend it since it's not all that visually appealing. I think that's important for something that used to hang and display headphones.
👤These were bought to hang two headsets on the side of a media cabinet, made of the same laminated particle board that most user-assembled furniture is made of. I stuck these into place after cleaning the surface. I left the hangers unused for a couple of days before hanging them. The backing has held up well. There is a The best thing about these cradles is that they are arched and don't cut into the padding of headphones. There is a I understand why some would not like it, as some of the reviews state, these do have a rough-cut, textured look to them. I like the look of them. I haven't looked at them since I installed them. They blend into the room as black headphones.
👤I have too many headsets. I needed a way to keep them all out of the way so I could grab them. I bought two 2-packs. There is a The plastic is strong. It is easy to put a headset on the hook and take it off again. I've seen 3M red tape used on dash cams, and it's really strong. This glue is forever. If you don't want it to ruin the finish of the furniture you stick it to, you can wait 10 minutes to remove it. It is easy to remove the leftover glue with the help of WD-40. You just have to deal with the effects of WD-40.
👤I love these. I don't know. I have 5 pairs of headphones that I have accumulated from gaming, but I have no place to put them. I found some really cool mounts for them. They're wide to accommodate thicker headbands, and the mount is larger, so it doesn't cause the foam pad to get damaged over time. They are the perfect size. My audio technicas can hold the headset up with the cable around the hook, even though most of my devices are wireless. I will definitely be investing in more of these when I move to a new place.
Universal under desk design allows for a near universal fit on most desks. There is a new word for it. The Spring Clamp is easy to remove. Not only for storing all kinds of headphones, but also for headsets, glasses, and bags. The Wall Mount Hanger is made of a soft, non-abrasive plastic with a sturdy internal frame and will not scratch your headphones. It is easy to install with included screws. The holder can be mounted on any surface you want. Small design saves more space. The holder is made of a material that is light. The headphone stand has screws that hold it in place. It's suitable for all kinds of headphones and earphones, such as wired headphones, wireless headphones, PC gaming headphones, TV headphones, wired earbuds, wireless earbuds, and wireless earphones. It can be mounted on any flat surface you want, such as desk legs, cabinets, shelves, wall and glass. It can be mounted on any panel. Such as on a desk. Clean the surface by using wipes.
👤I like this product. The hook is mounted to the wall. I have it to the left of the white wall switch. There is a The hook is large enough for any headphones. Simple white hook design looks nice mounted to the wall. There are holes for the anchor in case you need more. I was worried that the hook would be too small for Airpod Max, which is a sort of wide mesh top. It's a perfect fit, but can probably fit any other headphones. I don't use the feature, but I like that it has additional holes for holding airpods or ear buds. All in all, what I wanted.
👤I use a HyperX Cloud Stinger for work. I have an ikea desk. I stuck it to the side of the Alex drawers. It feels very sturdy and holds up well. I'm not going to pull this off unless I pull as hard as I can. There is a The HyperX is wireless, so I don't have cables to mess with, but it looks like you could wrap the cables around the front lip of the hanger. There are slots where you could keep earbuds. All of them were very happy with my purchase.
👤I got this for my headphones. I wanted to keep them away from my son. I like the idea that you can use this to store a variety of headphones, including gaming headphones, airpods, tv headphones, and your regular music headphones. I think my only complaint is that the 3M glue that I used on my wall did not hold up as well as I would have liked, the part that was sticky stayed on the plastic and the rest of the glue was on the wall. I tried applying the command strip to the sticky part but it didn't work. I was able to remove the sticky part from the plastic and get the glue off the wayy with no damage or problems, and I placed the command strip on the plastic to the wall, and it has been up there with no problem. If you're going to purchase this, you should take into account something, like command strips. I need it and it works just as I need it. My headphones are out of the way now.
👤My desk is not cluttered because my headphones are held for work. They are a good purchase.
👤It's very easy to install and fit, I screwed it into a stud and it's not going anywhere.
If you need more firmness, you can mount the headset hanger with screws or strong 3M VHB two-sided tape. Loadable 3.3lb with tape and 33lb with screws. It's suitable for any flat surface such as PC, desk legs, cabinets, shelves, wall and glass. It can be used anywhere you like. A nice combination and sufficient quantity can satisfy your different demands, and you can share them with your friends. The headphone hook is practical and light, it is a good way to tidy up your desk, it will save space, and you can use it when you're not using it. The headset holders are made of quality acrylic, which is durable and firm, not easy to break, and the black foam pad design protects your headband headphones from wear when suspended. You can give these hooks to your friends as a present, because they are universal, and they are suitable for various kinds of headphones. They are easy to install with matched quality tapes, and you can stick them to anywhere you want.
👤I can't peel the plastic 3M label, so they may have changed what's used to adhere to the wall. I can't peel the covering on my long finger nails because I have a long nail. I've given up trying to get that off. I will try to use a command strip. The whole thing is brought up when I try to remove the protective label. See the picture. I was able to get that corner to peel off when I took the picture. It's very difficult to remove the protective label. It's very sticky and has 5 stars.
👤These are exactly what you think they are and how they appear in photos. They're very simple pieces of bent plastic with a thin layer of foam in the part that contacts the headphones, but they do exactly what they're supposed to do and so far, they've held my headphones without issue. They're an inexpensive choice that aren't the most aesthetically pleasing, but they do exactly what they claim and look like they do in photos.
👤These aren't strong. The first broke. All four were broken within a week. I ordered metal to be replaced. The headsets were only held by the children but they got some rough treatment. If you use alternate glue, it may work in another home.
👤I was excited when I bought this because my headsets will no longer be laying around. The glue didn't last long. I had to stick it back onto the wall after it fell again. I had to buy the ones that came with it instead of the ones that came with target. Since then, it has not fallen. I had to buy new tape for it because I think it's not worth the money.
👤It broke after catching on something and the hook came off. It took the paint off the wall.
👤I hung these with the headphones on. They are still tight and up. Prepare for missing drywall if you want to remove them.
👤It's pretty basic but useful. Does it keep my headphones off my desk? If you own wired headphones like I do, I would recommend getting cable clips that are waterproof to avoid having to loop the headphones around.
👤It's good to hold up well so far, just make sure to follow the instructions on how to clean the surface and give the glue time to stick.
👤I didn't know how to put my first 1 on. There is a I stuck it to the wall and then realized it was a tag. There is a I have a few headsets. I have a bag for my work at the side of the desk with a laptop and other bits. I bought them and they were very tough.
👤Works great for headphones and PS5 controllers. It might be a tad expensive.
👤Basic hooks are flimsy at the bend but I hope they survive. I will update if they don't.
👤These were used for the training room at work. They are easy to fix and good value for money.
This low-profile headphone hook is designed to match the rest of Kanto's premium desktop solutions and brings you one step closer to achieving that minimalist style you've been craving. A dual game controller holder and phone wall mount. You can wall mount your game controller. There is only one wall mount that holds controllers and headphones. It works with PS4 and PS3 game controllers, as well as most other third party controllers. It's good to hold most headphones of any size. The stadIUM segway is a must have for your gaming setup, it keeps your gamepads organized and looks good. SECURE INSTALLATION Their dual controller holder can be installed on desks, shelves, cabinets, glass surfaces, rear of the TV/monitor, and many more. VHB is used by GoPro to secure their cameras during extreme activities so you can be sure it won't let you or your controllers down. The max weight limit is 1.5 kilogram. Hang your controllers out of the way so that they are not in the way and keep your game space free and organized. One holder for all is designed to hold your game controllers and headphones in one place.
👤I put this on the wall next to my futon, but forgot to put my controller and headphones on.
👤It was made on a 3D printer. Within 24 hours, the glue attached to the pre cleaned surface failed. The 3D printed material broke apart. It's complete waste of time and money.
👤After a few days of using it, I really like it. It has an annoying flaw. It can hold up to 2 controllers and your headset, that's what I was interested in. I tend to get up a lot. If you have a controller on the lowest rest, I put my headset down a lot. Every time, the headset will hit it. It doesn't matter which controller it is, the headset will hit it. I can't use the lower controller rest because I've had it fall a few times. I'm wondering if it was worth it to buy this one or if I could have gotten the one with just a single controller rest. I think I will cut out the second rest. If the angle was different or if the head rest part had more room to spare. This would be a perfect score. Everything else is great. The command strip is stuck to my desk and it feels sturdy. If it had more room for the headset, it would be a perfect 5.
👤This makes everything look organized and saves a lot of space. I had to drill a small hole and insert a nail into the wall near the top to make it sturdy, but the controller hides the nail. You wouldn't know if it is 3d printed from a few feet away.
👤I bought two of these for my husband as I was unsure if he would like them. The glue is very strong. When we were adjusting to his likely, it did not peel the paint and we have been holding two remotes and a pair of headsets.
👤I bought this for my husband because he likes gaming. He tried to remove it after he hung it up. It ripped the paint and a chunk of the wallboard. We had to rip off the glue and chunk of the wall so we wouldn't have to hang it again.
👤Didn't realize it was bad. Does not look good. I wish I'd known that before buying. It's hard to tell in the pictures. It should be stated in the description. There is a Injection molded one would have been better.
👤I use mine for my head set and glasses, but always close by with my headset for laptop and music. There is a Good quality and sticks to side. There are three shelves for the head set. It was perfect. It's a good thing.
👤I like this product, but it is not what it states. It is false that it sticks to everything. It doesn't. It was stuck on to a wooden surface and fell off. It had to be stuck onto the wall. It has never fallen off since.
Headphone wall mount hanger products from Brainwavz. In this article about headphone wall mount hanger you can see why people choose the product. 6amlifestyle and Linkidea are also good brands to look for when you are finding headphone wall mount hanger.
Brainwavz, 6amlifestyle and Linkidea are some of the best brands that chosen by people for headphone wall mount hanger. Find the detail in this article. Moko, Link Dream and Avantree are also brands that their products are worth to check.