The controller wall mount includes wall anchors, double-sided tape, and hard plastic for long operation life. The design makes it easy to reach your headphones. It was designed by the headphone manufacturers to have minimal long term indentation on your head band. The Brainwavz Cradle has a curved bed in order to better hold your headphones without leaving marks on your head band. The same 3M VHB tape, the same glue, and long term safety are what makes it secure. If you have to move the stand after placing it please use a hair dryer to warm up the pad and then remove it from the wall. The max weight is 1.5 kilogram. It's comparable and it has a warranty. Most headphones and gaming headsets are compatible with this. To make sure their stand is compatible with your headphones, please check the dimensions of the headset bed and the width of your headband.
👤I am only leaving this review because the complete description of the product does not state it is a 3D printed piece. The picture of a smooth finish piece made me think it was a mold injected plastic piece. I received a 3D printed item. I will keep it, but not what I wanted. I have a 3D printer and can tell it is from a FDM printer. For people who are interested. Black PLA is printed at 0.2 layer height. Wall count 6 is pretty impressive. Without breaking it, I can't tell. The printer could use some tl smoothers. There is a Again, I am only leaving a one star review because I believe I was misled about the product. I would have printed my own.
👤I was assuming it would be a sort of gloss finish based on the photo on the product page. I received a pack of raw-finish-looking 3D printed headphones. It's not the most appealing look for the product, but they do their jobs well, and anything else would be better. It's easy to miss that this is not a smooth finish, even though the photos depict it. I can't recommend it since it's not all that visually appealing. I think that's important for something that used to hang and display headphones.
👤These were bought to hang two headsets on the side of a media cabinet, made of the same laminated particle board that most user-assembled furniture is made of. I stuck these into place after cleaning the surface. I left the hangers unused for a couple of days before hanging them. The backing has held up well. There is a The best thing about these cradles is that they are arched and don't cut into the padding of headphones. There is a I understand why some would not like it, as some of the reviews state, these do have a rough-cut, textured look to them. I like the look of them. I haven't looked at them since I installed them. They blend into the room as black headphones.
👤I have too many headsets. I needed a way to keep them all out of the way so I could grab them. I bought two 2-packs. There is a The plastic is strong. It is easy to put a headset on the hook and take it off again. I've seen 3M red tape used on dash cams, and it's really strong. This glue is forever. If you don't want it to ruin the finish of the furniture you stick it to, you can wait 10 minutes to remove it. It is easy to remove the leftover glue with the help of WD-40. You just have to deal with the effects of WD-40.
👤I love these. I don't know. I have 5 pairs of headphones that I have accumulated from gaming, but I have no place to put them. I found some really cool mounts for them. They're wide to accommodate thicker headbands, and the mount is larger, so it doesn't cause the foam pad to get damaged over time. They are the perfect size. My audio technicas can hold the headset up with the cable around the hook, even though most of my devices are wireless. I will definitely be investing in more of these when I move to a new place.
There is a package list and reliable warranty. MAONO products have a 12-Month warranty. The Universal Game Controller HOLDER WALL MOUNT works with most third party game controllers. The angle of their hanger has made it possible to reduce the scratches on your wall and controller. The Universal Headphone Hotline: The wide and curved seating bed is suitable for almost every type and size of gaming headphones. The headband will not fall off if the bed is curved. SECURE INSTALLATION Their Universal Game Controller & Headphone hanger mount can be installed almost anywhere, it comes with 3M VHB tape pre-fitted and can be installed on desks, shelves, cabinets, glass surfaces, rear of the TV/monitor, and many more. VHB is used by GoPro to secure their cameras during extreme activities so you can be sure it won't let you or your controllers down. The max weight limit is 1.5 kilogram. Hang your controllers and headphones out of the way so that they don't get damaged and keep your game space free and organized. A universal design to hold both your game controller and headphones in one place looks stylish and is held securely.
👤The price is hard to understand because it is 3D printed. I have seen some issues in other reviews, but it seems like it's attached to me. It's the kind of glue that if you're not careful, you can damage the wall. There is a When people complain about the failing of the glue, the easiest answer is to clean the wall and let the glue cure for 24 hours under no load. I haven't been using it for a while. If it fails on me, I will update this review. The controller and two pairs of headphones are still on the wall 10 months later. Don't be lazy, clean your wall and let it cure for 24 hours, it will stay.
👤I use this for my PS5 controller. I have had trouble with it sticking to the wall. It fell off a couple of times, which is concerning since I have very expensive accessories on it. I put more tape on it, but I am not sure how long it will last. There is an update. After it fell the first time, I secured it with tape, but it fell again and took some of my wall with it. I have to go with a no on this one.
👤After about a month of use, the glue started to come loose and I had to make a mount for it on the wall. If you want to have one of your own, you can just look up the file to print it. I think it works as well as it costs.
👤This product looks cheap, and that is the only flaw I can see. It's not the most attractive way to make something like this, but the simple design is elegant enough that you won't be ashamed to hang it on your wall. It looks like any other plastic hanger once you put a pair of headphones and a controller on it. The small hook on the back of the hook is easy to use, and the second hook on the top can easily support a coiled-up headphone cord or controller wire. The hook on the back is not big enough to hold a coiled cord. It might be able to fit both a controller cord and a headphones, but that would be pushing it to the limit, so if you need space for both, this might not be the product for you. There is a The glue is strong and has held up well. I tested it by applying some extra weight and had no problems with the hanger or the glue. It's a permanent home for my headphones and controllers, and it's not showing any signs of weakness. Some reviews have said that the glue didn't work. It's possible that some people got a bad case, but I would point out that it's necessary to clean the surface before applying the hanger, and that you need to wait until it's completely dry. It will work for you if you don't mind that it looks like a piece of plastic.
Universal under desk design allows for a near universal fit on most desks. There is a new word for it. The Spring Clamp is easy to remove. Not only for storing all kinds of headphones, but also for headsets, glasses, and bags. The Wall Mount Hanger is made of a soft, non-abrasive plastic with a sturdy internal frame and will not scratch your headphones. It is easy to install with included screws. The holder can be mounted on any surface you want. Small design saves more space. The holder is made of a material that is light. The headphone stand has screws that hold it in place. It's suitable for all kinds of headphones and earphones, such as wired headphones, wireless headphones, PC gaming headphones, TV headphones, wired earbuds, wireless earbuds, and wireless earphones. It can be mounted on any flat surface you want, such as desk legs, cabinets, shelves, wall and glass. It can be mounted on any panel. Such as on a desk. Clean the surface by using wipes.
👤I like this product. The hook is mounted to the wall. I have it to the left of the white wall switch. There is a The hook is large enough for any headphones. Simple white hook design looks nice mounted to the wall. There are holes for the anchor in case you need more. I was worried that the hook would be too small for Airpod Max, which is a sort of wide mesh top. It's a perfect fit, but can probably fit any other headphones. I don't use the feature, but I like that it has additional holes for holding airpods or ear buds. All in all, what I wanted.
👤I use a HyperX Cloud Stinger for work. I have an ikea desk. I stuck it to the side of the Alex drawers. It feels very sturdy and holds up well. I'm not going to pull this off unless I pull as hard as I can. There is a The HyperX is wireless, so I don't have cables to mess with, but it looks like you could wrap the cables around the front lip of the hanger. There are slots where you could keep earbuds. All of them were very happy with my purchase.
👤I got this for my headphones. I wanted to keep them away from my son. I like the idea that you can use this to store a variety of headphones, including gaming headphones, airpods, tv headphones, and your regular music headphones. I think my only complaint is that the 3M glue that I used on my wall did not hold up as well as I would have liked, the part that was sticky stayed on the plastic and the rest of the glue was on the wall. I tried applying the command strip to the sticky part but it didn't work. I was able to remove the sticky part from the plastic and get the glue off the wayy with no damage or problems, and I placed the command strip on the plastic to the wall, and it has been up there with no problem. If you're going to purchase this, you should take into account something, like command strips. I need it and it works just as I need it. My headphones are out of the way now.
👤My desk is not cluttered because my headphones are held for work. They are a good purchase.
👤It's very easy to install and fit, I screwed it into a stud and it's not going anywhere.
The stand is made of high-quality aluminum. The PS5 PS4 Xbox one controller, desktop computer game handles, and most game controllers are compatible with the handle and headset hook brackets. The transparent patch and screw method is suitable for installation in any place-table, shelf, cabinet, glass surface, and so on. Product dimensions are 3.14 x 1.57 inches. The package has headphones stand X 1.
👤The controller does not provide proper support.
👤It's easy to install. It's high quality. The mount is made of solid metal with a black coating, but the brackets are plastic. It's easy to install if you have a 9 year old. The mounting system is strong. It works perfectly with the Xbox X/S controller.
👤The controller is too small to hold this small accessory. We didn't install it before trying to balance it. The pictures of the product were not real. Returning.
Universal mounting: The portable vehicle headrest mount player allows you to easily install the posts into your car. Everything you need for a screen cover, mount, and remote control is included. Damage-free mounting. Mount your gaming headset almost anywhere. The premium-grade headset holder uses a specialremovable glue to avoid damaging the wall. This product is ideal for people who don't want to damage their headset or wall. This stand has an extra large cradle to make sure it is compatible with larger gaming headsets. This stand has a soft-Silicone holder to protect your headset band from scratches. It's compatible with all gaming headsets, over-the- ear headphones, and on- ear headphones. TOTAL MOUNT is the leader in electronics mounting. Over 70 patents, 50,000 five-star reviews, and a long history of quality make TOTAL MOUNT a leader in its field. TOTAL MOUNT is the leader in electronics mounting. Over 70 patents, 50,000 five-star reviews, and a long history of quality make TOTAL MOUNT a leader in its field.
👤The product works as intended. I have a headset on my computer. It seems very sturdy and has no fear of falling.
👤I have a headset that most stands don't work, but this one does very well with it.
Stores have varied sizes of equipment. The mounting depth of the 2-post wall-mount brackets can be adjusted. The shelf can be at the top or bottom. Installation is free. The wall mount rack has tapped rails so you can mount your equipment directly to the rail without using cage nuts. The standard hole spacing on the wall rack is 16” apart, which makes it a sturdy and safe mounting solution for your equipment. The wall mounting feature allows you to free up desk or floor space. The wall mounting feature allows you to free up desk or floor space.
👤This isn't the type of item that you will find in a standard household. There is a small but growing minority of females that are self taught techies and makers and this is a type of product that you will find in a special breed of self taught techies and makers. This review was done by a female techie who needed things to meet specific requirements. There is a I was impressed by the quality of the StarTech 8 RU wall-mount unit, except for the lag bolts. It's good if you only have a small space to work with. The maximum depth of the unit is only 18 inches, so it won't work with most of the server. This rack was perfect for my needs and exceeded my expectations. I reviewed many small wall-mount racks before I decided on this one. The turning point for me was that the depth of the rack is adjusted so it was helpful in my case since I had some rack mountable devices that were between 12 and 18 inches deep. The rest of the rack is limited to a limited depth of 12 inches. There is a It can be difficult to mount the rack if you're alone. I mounted it to the wall on my own, by setting it on a ladder and climbing it. The mounting template made mounting much easier for me. If you're mounting this rack alone, it's very helpful. The rack is heavy. It's much easier to use a level with a lightweight template than it is to get a heavy wall-mount level. Adding the template as an installation aid is a small touch. There is a I didn't like the size of the mounting screws because they were too shallow for my needs. I purchased larger anchor bolts than the ones provided because I was going to put a lot of weight on it. I decided not to use a backer-board. I bought some washers that were made of nickel and polyurethane and put them between the rack and the wall to make it look cleaner. There is a I am a small lady, but the rack was built to support my full weight after it was mounted, which exceeds the manufacturer's specifications. I liked the positioning of the tie-off points. I'm picky about cable management and the placement of tie-off points makes it easier for me, but it would have been nicer if there were some tie-off points on the side interior and exterior.
👤What do you like? Sturdy build quality 2. It comes with everything you need to put it together. 3. The bottom shelf adds rigidity and is a good place to put non rack mount devices. 4. The rack is threaded and doesn't require nuts to hold it together. I'm very pleased that they didn't cheap out and use self-tapping screws to hold it together. Good quality for money. What I don't like. I wish there were holes on the sides that would allow access to the back of the patch panel. There is a The product is on the fence. I believe it was cleaver to allow the face to slide out from the back. If the rack mounted hardware is different depths, this is very helpful. If it's going in a tight space and the screws aren't accessible, I'm against it. It's not much of a feature. One side of the rack is not hinged. It would be great if one side of the rack was open so a patch panel could be swung out. There is a The patch panel has to be removed, which makes punching down wires a bit of a challenge, trying to hold the patch panel securely. There is a real pain in the butt. I will accept responsibility for what I really don't like because I didn't think about the hinge. I would not have bought this product if I had done so. If the product had a hinge and holes on the side, then I would give it 5 stars.
The package contains Headphone Wall Hooks. A black folding coat hook has a screw. The thickness is 5mm, the length is 3mm, the height is 234 and the width is 25mm. The screw size is M4x30mm. The package contains 10 x aluminum wall hooks. The wall anchor is 20 x Wall Anchors. A coat rack single hook saves space.
👤It is a gamechanger for sure. I wanted hooks on the wall in our laundry room. The amount of space you have to hang things on is much more than traditional hooks, which is why you can fold them up when not in use. Very strong. I couldn't be happier. It's easy to install.
👤I love these! I used them as a ledge to get my irons off the counter. I like that I can close them when not in use and let the irons sit on them while they heat up.
👤This is the best idea ever. It is sturdy. They work well.
👤I put up most of my unused headphones. It was cheap and easy. Good quality.
👤The coat hooks were used in the arrival center. I hang the backpacks and coats on them. They were easy to install. They don't take up a lot of space and look pretty slim when folded up.
👤They fold when not in use. Great for the back hall.
👤The half of the screws were missing.
👤Great little hangers and like how they flip up when not in use. I think they would be great in boats of cruiser size.
👤We put these in the bathroom as towel holders. They become almost invisible when closed and hold our heavy Turkish towels.
👤Parfait pour arricher notre.
The wall mounting feature allows you to free up desk or floor space. The design makes it easy to reach your headphones. It was designed by headphone manufacturers for optimal storage for your headphones. The Brainwavz UltraC has a large curved bed and aABLE HOOK to better hold your headphones. The cable hook makes it easier to manage your headphones. The same 3M VHB tape, the same glue, and long-term safety are what makes it secure. If you have to move the stand after placing it, please use a hair dryer to warm up the pad and then remove it from the wall. It is compatible with most headphones and gaming headsets. To make sure their stand is compatible with your headphones, please check the dimensions of the headset hanger bed and compare it to the width of your headband. It is not recommended to use this product on painted walls.
👤It was stuck to the side of the tower panel. Very strong. It is not coming off. If you want a smooth finish, this is not it. It's a good size for any headphones. It was possible to hang it on the side of my desk so my earbuds wouldn't run against my tower panel.
👤I had to move my headphones around to find a place to work. I put this hook on the side of my desk and it solved my headphones problems. The hook is strong. It isn't going away.
👤It's a great device, simple yet awesome.
👤Unless you have a longer cable, you might not be able to hook your cable to the smaller one. It works amazing.
👤It does what it should with the glue.
👤I have the Hooka and the Hengja and they are superior to this headphone hanger. You could use those for a long time. This is a part made of black. Public library grade or high school lab grade are the grades used. The form, function, finish, and price point of Hooka and Hengja are massive. This is not the same. The part I paid for felt and looked like $1. It works. It has a pair of headphones. I put it behind the monitor so you can't see it. The hangars that I recommend are the ones that had the extra $2. I ordered 3 headphone pads and 3 headphone hangars from brainwavz. This is the first time in my life that I have been so underwhelmed by a product. I will continue to buy their stuff, but I would not buy this one.
👤The printed hanger for headphones is nice. The back of my TV was well protected after I wiped it down with a lens wipe.
One holder for all is designed to hold your game controllers and headphones in one place. The heavy duty folding hooks are made from aluminum. The coat hook is 78 x 26 x 71mm/ 3.07 x 1 x 2.79 inches and the screws are 25mm long and 8mm in screw head diameter. You can use these folding wall hooks to hang dresses, clothes, headsets, and hats in different places, such as bedrooms, bathrooms and closets. The hanging hook has a smooth edge that will not damage your clothes or items you hang on. The folding hooks are very easy to install. The hooks are reinforced with 2 screws. The folding hooks are very easy to install. The hooks are reinforced with 2 screws.
👤If you are looking for an item to see your nerdiness, then these are the ones for you. Your headphones are mounted on your wall as if they are a trophy buck. If you want to impress the ladies, you should show off those beautiful headsets. The folding mechanism makes them disappear like your father when you were a child.
👤I had the idea to hang my headphones and a bunch of stick on hooks, but they came up a few times. This one gives value. There is a 5 piece package out there, but this one of 4 costs less. It is made of metal. It falls down. It's about 3 inches or something like that. Comes with screws. I have 6 headphones on the wall. It will work for any hook of that size. I can flip the doors up when they're not in use. You don't need to search for hours to spend 10 bucks.
👤The Greekia version of these are twice the price, and they are fantastic. I was trying to save money, and so I ordered these, and two of them fell apart and opened up. There is no way to put the pins back together after the plastic came out from under the metal lip. The two that were usable were from the four pack.
👤I didn't want to spend more than a few dollars for a mount for my controller. The official ones go over 15 dollars but are not worth it. I found these for a lot less than I expected. If I had bought a headset mount and controller, it would have cost me 30 dollars and I would have had to pay 6 dollars for it. It worked out great.
👤Nice idea, nice design, poorly executed with cheap materials. I received more than I wanted because I marked the box twice. I have replaced one of them three times now. They hang partially open after install, as they no longer flip back to their original position.
👤I bought these brackets to hold my gym gear. They're easy to fold when not in use. The brackets can hold a lot of weight. My opinion is over 10 lbs. They would be great for hats and jackets.
👤I needed a couple of hooks for my headphones and for the price, I got this kit of 4. There is a This is a bargain and it is sturdy. One of them holds their guitar by a strap for weeks without a problem if you use the correct screws. The elbow part is strong and will hold pounds and pounds of load, but the folding design may be deceiving, as it is more of a mechanical design.
👤The metal is easy to open and close, and it stays closed when closed. It's a good size to fit big things.
The bag has 30 cell phone pockets and 30 clear card pockets. Even kids can do it in a few seconds. You can't put things on the wall after it's been installed because you can't stick it on the wall easy to tear it off. It's easy to stick on the wall at the bedside or bathroom in the home, dorm or office, it's as wall mounted semicircle box, left box to store the cell phone, earphone, glasses,remote, key, pen, pencil, sticky. Meeting your daily needs. Modern white color and plastic materials. It can be a simple style decor if you want it to be. There are two styles, vertical or horizontal. According to various demands. The dimensions are 8.7 inch X 8.7 inch X 3.15 inch. It's a good idea to organize bedside items before sleeping and bathroom. If you don't like this bedside shelf, they will give you 100% money back.
👤Hanging my keys and holding my wallet is great.
👤Like my keys and glasses.
👤There is a hook at the back of the plastic material. It was very easy to install. I use it to hang my mail. It has been working well for me so far. I like it a lot. Thanks.
👤My daughter has a loft bed that is perfect, has not fallen or budged, and her stuff fits on it.
It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc. Small and foldable design saves space. It can be used to free your desktop from chaos. Safe and Stable: The headphone stand has strong glue that will allow it to last a long time. The materials are high-quality. The rubber pads on the headband protect it from wear. All kinds of headphones, such as wired headphones, wireless headphones, gaming headphones, TV headphones, and so on, are suitable for the universal headset holder. It's easy to install and can be mounted anywhere. On computers, desk, and wall. Clean the surface by using wipes.
👤I was very happy with my purchase of this headphone holder, but it has been a year since I purchased it. I noticed that my headphones got in my hair when I noticed the odd goop on the bridge. The pull out bracket that my headphones rested on was the culprit. I was able to use alcohol wipes to remove all of the liquified glue and I was also able to repair the small pad that locks the brackets in the closed position with some automotive grade 3M double sided tape. Hopefully it will hold up better than what was used to assemble it. Is this the end of the world? I am going to keep an eye on it because it was a quick repair.
👤I have a charging station in my laundry room. The hug makes it look less cluttered and it gets a lot of stuff off the counter. I charge a lot of stuff on this station. The double sticky tape is used. I made it even more solid by attaching a couple screws to the holes. Unable to keep earbuds and headphones off the countertop while charging. If you don't have anything to hang on it, this is a great option. I'm very happy with the space that was cleaned up.
👤The option to screw it into your desk is what I bought this hook for. I tried the glue before I tried to put it in. I had low expectations, but the sticker is so strong that it's like a combination of Ultimate Warrior and Hulk Hogan. I'm thinking about buying another one for my towels.
👤My father built a desk for me that is solid wood. It was built for writing, not a computer. I used the glue that came with the product because I couldn't drill a hole in it. I have a very light-weight Sony headphones, but they haven't budged over a month. The hook portion is large and padded to not damage my headphones. I might put two different pairs on there. I love that when I move this desk, I can just close the hook and it won't be a problem. There is a The metal is heavy and shiny. It's a good addition to my desk. I wish it didn't have the logo, but it is perfect.
👤Unfortunately it did not last. It fell off my wall in the middle of the night, luckily it didn't break my headphones, I was sleeping. It was loud. I might use it on a wood surface with screws to hold it up instead of giving it to someone else. Holds fast to painted plaster. I've considered buying another one just for the tape. It has been on the painted plaster walls for a long time. It holds my headphones and doesn't bang when I place them down. The inside of the "hook" is made of some kind of material. It doesn't open without you meaning it to.
👤This is what it seems to be. I thought it would be bigger but it is not. I used the two screws instead of using the glue to stick to the wall. I would have been concerned that the headset wouldn't hold it's weight. There is a This looks great on the wall. When I moved my console, I realized I lost the space I wanted for the headset stand and that's when a hanging stand became optimal. This is in front of my console. It's difficult to pull it down when it's folded up, because you don't have headsets on. I think that will loosen over time with use and shouldn't be a negative.
Headphone wall mount rack products from Brainwavz. In this article about headphone wall mount rack you can see why people choose the product. Brainwavz and Enbiawit are also good brands to look for when you are finding headphone wall mount rack.
Brainwavz, Brainwavz and Enbiawit are some of the best brands that chosen by people for headphone wall mount rack. Find the detail in this article. Linkidea, Totalmount and Startech are also brands that their products are worth to check.