Best Headphone Wall Mount White

Mount 6 Dec 2022 10+ Comments Open

1. Brainwavz Cradle Large Audio Technica Accessories

Brainwavz Cradle Large Audio Technica Accessories

The controller wall mount includes wall anchors, double-sided tape, and hard plastic for long operation life. The design makes it easy to reach your headphones. It was designed by the headphone manufacturers to have minimal long term indentation on your head band. The Brainwavz Cradle has a curved bed in order to better hold your headphones without leaving marks on your head band. The same 3M VHB tape, the same glue, and long term safety are what makes it secure. If you have to move the stand after placing it please use a hair dryer to warm up the pad and then remove it from the wall. The max weight is 1.5 kilogram. It's comparable and it has a warranty. Most headphones and gaming headsets are compatible with this. To make sure their stand is compatible with your headphones, please check the dimensions of the headset bed and the width of your headband.

Brand: Brainwavz

👤I am only leaving this review because the complete description of the product does not state it is a 3D printed piece. The picture of a smooth finish piece made me think it was a mold injected plastic piece. I received a 3D printed item. I will keep it, but not what I wanted. I have a 3D printer and can tell it is from a FDM printer. For people who are interested. Black PLA is printed at 0.2 layer height. Wall count 6 is pretty impressive. Without breaking it, I can't tell. The printer could use some tl smoothers. There is a Again, I am only leaving a one star review because I believe I was misled about the product. I would have printed my own.

👤I was assuming it would be a sort of gloss finish based on the photo on the product page. I received a pack of raw-finish-looking 3D printed headphones. It's not the most appealing look for the product, but they do their jobs well, and anything else would be better. It's easy to miss that this is not a smooth finish, even though the photos depict it. I can't recommend it since it's not all that visually appealing. I think that's important for something that used to hang and display headphones.

👤These were bought to hang two headsets on the side of a media cabinet, made of the same laminated particle board that most user-assembled furniture is made of. I stuck these into place after cleaning the surface. I left the hangers unused for a couple of days before hanging them. The backing has held up well. There is a The best thing about these cradles is that they are arched and don't cut into the padding of headphones. There is a I understand why some would not like it, as some of the reviews state, these do have a rough-cut, textured look to them. I like the look of them. I haven't looked at them since I installed them. They blend into the room as black headphones.

👤I have too many headsets. I needed a way to keep them all out of the way so I could grab them. I bought two 2-packs. There is a The plastic is strong. It is easy to put a headset on the hook and take it off again. I've seen 3M red tape used on dash cams, and it's really strong. This glue is forever. If you don't want it to ruin the finish of the furniture you stick it to, you can wait 10 minutes to remove it. It is easy to remove the leftover glue with the help of WD-40. You just have to deal with the effects of WD-40.

👤I love these. I don't know. I have 5 pairs of headphones that I have accumulated from gaming, but I have no place to put them. I found some really cool mounts for them. They're wide to accommodate thicker headbands, and the mount is larger, so it doesn't cause the foam pad to get damaged over time. They are the perfect size. My audio technicas can hold the headset up with the cable around the hook, even though most of my devices are wireless. I will definitely be investing in more of these when I move to a new place.

2. Controller Stand Holder Mount PlayStation 4

Controller Stand Holder Mount PlayStation 4

Top-GRADE MATERIAL. The controller wall mount is made of high strength and high toughness, not easy to be broken and out of shape, it is very durable. Compatibility is multi-functional. It works with all types of game pads. Most game controllers are made by third party. SPACE SAVING Saving desktop space is achieved by wall mounted installation of the Perfect display and storage controller. Installation is easy and safe. It is possible to install with tape almost anywhere, and can be done on desks, shelves, cabinets, glass surfaces, rear of the TV/monitor, and many more. The max weight limit is 1.5 kilogram. REASONABLE COLLCATION: The controllers come with a 2 pack which makes them balanced and convenient for charging, preventing damage and keeping your game space free and organized. When you're not playing, the controller stand is a good place to keep your controller.

Brand: Bfz Homes

3. Enbiawit Headphone Headphones Headset Mount Installation

Enbiawit Headphone Headphones Headset Mount Installation

Universal under desk design allows for a near universal fit on most desks. There is a new word for it. The Spring Clamp is easy to remove. Not only for storing all kinds of headphones, but also for headsets, glasses, and bags. The Wall Mount Hanger is made of a soft, non-abrasive plastic with a sturdy internal frame and will not scratch your headphones. It is easy to install with included screws. The holder can be mounted on any surface you want. Small design saves more space. The holder is made of a material that is light. The headphone stand has screws that hold it in place. It's suitable for all kinds of headphones and earphones, such as wired headphones, wireless headphones, PC gaming headphones, TV headphones, wired earbuds, wireless earbuds, and wireless earphones. It can be mounted on any flat surface you want, such as desk legs, cabinets, shelves, wall and glass. It can be mounted on any panel. Such as on a desk. Clean the surface by using wipes.

Brand: Enbiawit

👤I like this product. The hook is mounted to the wall. I have it to the left of the white wall switch. There is a The hook is large enough for any headphones. Simple white hook design looks nice mounted to the wall. There are holes for the anchor in case you need more. I was worried that the hook would be too small for Airpod Max, which is a sort of wide mesh top. It's a perfect fit, but can probably fit any other headphones. I don't use the feature, but I like that it has additional holes for holding airpods or ear buds. All in all, what I wanted.

👤I use a HyperX Cloud Stinger for work. I have an ikea desk. I stuck it to the side of the Alex drawers. It feels very sturdy and holds up well. I'm not going to pull this off unless I pull as hard as I can. There is a The HyperX is wireless, so I don't have cables to mess with, but it looks like you could wrap the cables around the front lip of the hanger. There are slots where you could keep earbuds. All of them were very happy with my purchase.

👤I got this for my headphones. I wanted to keep them away from my son. I like the idea that you can use this to store a variety of headphones, including gaming headphones, airpods, tv headphones, and your regular music headphones. I think my only complaint is that the 3M glue that I used on my wall did not hold up as well as I would have liked, the part that was sticky stayed on the plastic and the rest of the glue was on the wall. I tried applying the command strip to the sticky part but it didn't work. I was able to remove the sticky part from the plastic and get the glue off the wayy with no damage or problems, and I placed the command strip on the plastic to the wall, and it has been up there with no problem. If you're going to purchase this, you should take into account something, like command strips. I need it and it works just as I need it. My headphones are out of the way now.

👤My desk is not cluttered because my headphones are held for work. They are a good purchase.

👤It's very easy to install and fit, I screwed it into a stud and it's not going anywhere.

4. OAPRIRE Universal Controller Accessories Anti Slip

OAPRIRE Universal Controller Accessories Anti Slip

This product can be used to extend your radio's audio-in and 3.5mm ports to other locations. Set to convert the audio-in port to the 3.5mm audio sockets. You should build your game for stress. The controller holder is suitable for almost any version of the controller and headset, keeping your game space free of mess. Give away 2 cable clips to build a small charging station. Professional design. The OAPRIRE controller stand is an excellent way to display all your controllers and is made of high-quality acrylic. durable and sturdy The controller wall mount has a heavy-duty and stable design, rubber anti-slip pads and raised tips to keep the controller balanced and centered. 3M tape and screws make it easy to install in a variety of places: a wall, gaming desk, PC, cabinets, kid's rooms, rear of the TV/ monitor, etc. The desktop is very clean after playing the game. If you care about compatibility, style and quality, this gaming accessories is the best choice. It's a great gift for your kids, gaming friends, boyfriends, etc.

Brand: Oaprire

👤It can be put on the side of my tv stand to hold my controllers. The glue has been reliable for a couple of months.

👤I attached them to the wall with the help of the glue. I pressed and held them in place for 30 seconds and didn't put anything on them until after 24 hours. One of them that was holding my controller fell off the wall in the night. I put the controller back in after reattaching it. It fell off again a few days later. I tried to heat up the glue with a heat gun before putting it on the wall, but I also cleaned the wall with alcohol. I'm hoping it stays. If you are willing to put in the effort, using screws would be more secure.

👤It was easy to install, but it took 24 hours to place a controller on it. It got my controllers off the entertainment center.

👤Works are described. It comes with mounting screws. A great price for a pair.

👤I bought the stands to keep my controllers out of the reach of our toddler. They match the controller and console color and are very easy to install.

👤It's installed with thumb tacks and comes with screws, but it's not white. It's off white.

👤The product is giving it a 3 stars because it does look nice with wireless controllers, but beware, they snap easily with very little force, so do not give it a 3 stars. I am still shocked and upset that it snapped to pieces so quickly. I loved it when it was up.

👤My son is very happy with the products he purchased.

5. Latom Foldable Hanging Aluminum Headphones

Latom Foldable Hanging Aluminum Headphones

One holder for all is designed to hold your game controllers and headphones in one place. The heavy duty folding hooks are made from aluminum. The coat hook is 78 x 26 x 71mm/ 3.07 x 1 x 2.79 inches and the screws are 25mm long and 8mm in screw head diameter. You can use these folding wall hooks to hang dresses, clothes, headsets, and hats in different places, such as bedrooms, bathrooms and closets. The hanging hook has a smooth edge that will not damage your clothes or items you hang on. The folding hooks are very easy to install. The hooks are reinforced with 2 screws. The folding hooks are very easy to install. The hooks are reinforced with 2 screws.

Brand: Latomex

👤If you are looking for an item to see your nerdiness, then these are the ones for you. Your headphones are mounted on your wall as if they are a trophy buck. If you want to impress the ladies, you should show off those beautiful headsets. The folding mechanism makes them disappear like your father when you were a child.

👤I had the idea to hang my headphones and a bunch of stick on hooks, but they came up a few times. This one gives value. There is a 5 piece package out there, but this one of 4 costs less. It is made of metal. It falls down. It's about 3 inches or something like that. Comes with screws. I have 6 headphones on the wall. It will work for any hook of that size. I can flip the doors up when they're not in use. You don't need to search for hours to spend 10 bucks.

👤The Greekia version of these are twice the price, and they are fantastic. I was trying to save money, and so I ordered these, and two of them fell apart and opened up. There is no way to put the pins back together after the plastic came out from under the metal lip. The two that were usable were from the four pack.

👤I didn't want to spend more than a few dollars for a mount for my controller. The official ones go over 15 dollars but are not worth it. I found these for a lot less than I expected. If I had bought a headset mount and controller, it would have cost me 30 dollars and I would have had to pay 6 dollars for it. It worked out great.

👤Nice idea, nice design, poorly executed with cheap materials. I received more than I wanted because I marked the box twice. I have replaced one of them three times now. They hang partially open after install, as they no longer flip back to their original position.

👤I bought these brackets to hold my gym gear. They're easy to fold when not in use. The brackets can hold a lot of weight. My opinion is over 10 lbs. They would be great for hats and jackets.

👤I needed a couple of hooks for my headphones and for the price, I got this kit of 4. There is a This is a bargain and it is sturdy. One of them holds their guitar by a strap for weeks without a problem if you use the correct screws. The elbow part is strong and will hold pounds and pounds of load, but the folding design may be deceiving, as it is more of a mechanical design.

👤The metal is easy to open and close, and it stays closed when closed. It's a good size to fit big things.

6. TOZO Bluetooth Wireless Headphones Waterproof

TOZO Bluetooth Wireless Headphones Waterproof

The high-quality TPE jacket, standard 3.5mm jack, anti-winding, anti-knot, provides 5X more durable, flexible, and sturdier than normal cable. 30000+bending test has been taken to make sure it is reliable. The TOZO T10 Earbuds' 8mm large size speaker driver has a drive area 1.77 times larger than the normal drive area, and it delivers powerful bass, mellow midrange, and clear treble. You should reproduce your music vividly. The TOZO T10 Earbuds support the advanced Bluetooth 5.0 technology, which provides stable transmission without interruption. Simply take 2 headsets out from the charging case and connect them to each other automatically and then just one step to pair the earbuds. IPX8 is waterproof. It is possible to waterproof for 1 meters deep for 30 minutes. The damage to the splash can be prevented by waterproof and sweatproof technology. Playtime lasts for over 6 hours from a single charge and 30 hours with a charging case. To fully charge the case, you can use a fast charge cable or a wireless charging device. Convenient charging way with no strings attached.

Brand: Tozo

👤I'm one of the few people who can't use the apple airpods. They fall out of my ear in less than a minute. I thought I would try a different brand, but when I put them in my ear, they fell out. I was going to give up and send the box back, but I decided to check out the instruction manual in case I messed up. I am happy I did. There were four different sizes of plastic ear caps included with the earbuds. I felt like Cinderella when I tried on the second smallest slipper. They were perfect, no matter how much I jumped up and down or shook my head. There is a The sound is great, with good highs and lows. The fit was very comfortable once I found the right match. These headphones have changed my life for the better.

👤I connected these to my fire stick so I could watch tv while my husband slept. The volume on the ToZo was very loud. I couldn't adjust it with the tv or fire stick remote. The volume can only be controlled with a phone or a device. I bought this on Prime Day and thought I was getting a good deal, but I found another purchase for less than I paid. Two stars because they work when connected to a phone or table, but that is not what I purchased them for. There is an update review. This is an update. The customer service of Tozo is wonderful. They issued another TOZO. The previous one works with my devices, but not my smart tv. I haven't tried the new one yet, but I will keep you posted. Thanks to Tozo.

👤I was very impressed with the Tozo T10. Even if the price was twice as high, the packaging, build quality, and features were still amazing. The T10's have a number of high end features, including wireless charging, IPX8 waterproof, and a high quality 8mm sound driver. It was too easy to pair them with my phone. If you take them out of the charging case, they are ready to pair, just make sure you choose the right ear bud. They have a stronger connection with the new bluetooth v5.0. I can leave them in my backpack and still be connected up to 30 feet away. The clarity of the highs and the richness of the bass are of the highest quality earbuds. I have taken these into the shower and both of the earbuds and the case are water resistant. I was pleasantly surprised to find that I could use my T10s for four hours, and that the charging case is good for four full charges of the earbuds. The wireless chargeable case is very useful. I'm good to go because I can set my phone and ear bud case on my charging pad. You need to use wireless charging. I couldn't find a better ear bud on the market.

👤I usually have enough money to make an impulse purchase at Christmas. I wanted to upgrade my totally wireless sound earbuds. They were good, but needed better sound to be perfect. With a budget of about $100, I started looking for something good from a known manufacturer. There was nothing in my price range. I started looking for a cheaper model because I couldn't see myself paying that kind of money for a brand I didn't know. I found 3-4 that looked good for around $50. The Soundcore Liberty lites were considered because I liked the other earphones. The Monoprice IPX4s had good reviews and previous good ownership. There is a Due diligence and a desire to be able to use one earbud at a time drive me to search for the best under $50 TWS sets, and Tozo looked pretty good. The buds can be put into either ear, even though they are labeled L and R. For the first time, I'm not using the largest tips. If you have big ear canals and it's hard to get tips that fit, you may find a good fit here. There is a The sound won't knock Bose out of the water, but for forty dollars, it is good, and an upgrade from my $20 pair. It has nice bass and highs. At low volume, the battery time is around 4 hours. I don't find it hard to get through a work day with them because the travel case can charge one while the other is playing. The charging case is something I like. I don't care about the fact that it can use a wireless charging device. You can see how charged it is by looking at the lights. It closes and is in a pocket. I don't know how many charges it will take because I keep it plugged in. There is a It is easy to pair once done. Pull a bud off the charge and it will start looking for your device. Since I'm using one at a time, I need to turn the other one off first, then get the other one. I separated them first and then grouped them together again. This is the best part of these for me. All in all, happy with the purchase. I save money to get something else. My brother is not convinced that I recommend these to people. I like them a lot.

7. Acrylic Headphone Adhesive Headset Headphones

Acrylic Headphone Adhesive Headset Headphones

It's comparable and it has a warranty. Most headphones and gaming headsets are compatible with this. To make sure their stand is compatible with your headphones, please check the dimensions of the headset bed and the width of your headband. A nice combination and sufficient quantity can satisfy your different demands, and you can share them with your friends. The headphone hook is practical and light, it is a good way to tidy up your desk, it will save space, and you can use it when you're not using it. The headset holders are made of quality acrylic, which is durable and firm, not easy to break, and the black foam pad design protects your headband headphones from wear when suspended. You can give these hooks to your friends as a present, because they are universal, and they are suitable for various kinds of headphones. They are easy to install with matched quality tapes, and you can stick them to anywhere you want.

Brand: Weewooday

👤I can't peel the plastic 3M label, so they may have changed what's used to adhere to the wall. I can't peel the covering on my long finger nails because I have a long nail. I've given up trying to get that off. I will try to use a command strip. The whole thing is brought up when I try to remove the protective label. See the picture. I was able to get that corner to peel off when I took the picture. It's very difficult to remove the protective label. It's very sticky and has 5 stars.

👤These are exactly what you think they are and how they appear in photos. They're very simple pieces of bent plastic with a thin layer of foam in the part that contacts the headphones, but they do exactly what they're supposed to do and so far, they've held my headphones without issue. They're an inexpensive choice that aren't the most aesthetically pleasing, but they do exactly what they claim and look like they do in photos.

👤These aren't strong. The first broke. All four were broken within a week. I ordered metal to be replaced. The headsets were only held by the children but they got some rough treatment. If you use alternate glue, it may work in another home.

👤I was excited when I bought this because my headsets will no longer be laying around. The glue didn't last long. I had to stick it back onto the wall after it fell again. I had to buy the ones that came with it instead of the ones that came with target. Since then, it has not fallen. I had to buy new tape for it because I think it's not worth the money.

👤It broke after catching on something and the hook came off. It took the paint off the wall.

👤I hung these with the headphones on. They are still tight and up. Prepare for missing drywall if you want to remove them.

👤It's pretty basic but useful. Does it keep my headphones off my desk? If you own wired headphones like I do, I would recommend getting cable clips that are waterproof to avoid having to loop the headphones around.

👤It's good to hold up well so far, just make sure to follow the instructions on how to clean the surface and give the glue time to stick.

👤I didn't know how to put my first 1 on. There is a I stuck it to the wall and then realized it was a tag. There is a I have a few headsets. I have a bag for my work at the side of the desk with a laptop and other bits. I bought them and they were very tough.

👤Works great for headphones and PS5 controllers. It might be a tad expensive.

👤Basic hooks are flimsy at the bend but I hope they survive. I will update if they don't.

👤These were used for the training room at work. They are easy to fix and good value for money.

8. TotalMount Gaming Headset Holder Permanent

TotalMount Gaming Headset Holder Permanent

Universal mounting: The portable vehicle headrest mount player allows you to easily install the posts into your car. Everything you need for a screen cover, mount, and remote control is included. Damage-free mounting. Mount your gaming headset almost anywhere. The premium-grade headset holder uses a specialremovable glue to avoid damaging the wall. This product is ideal for people who don't want to damage their headset or wall. This stand has an extra large cradle to make sure it is compatible with larger gaming headsets. This stand has a soft-Silicone holder to protect your headset band from scratches. It's compatible with all gaming headsets, over-the- ear headphones, and on- ear headphones. TOTAL MOUNT is the leader in electronics mounting. Over 70 patents, 50,000 five-star reviews, and a long history of quality make TOTAL MOUNT a leader in its field. TOTAL MOUNT is the leader in electronics mounting. Over 70 patents, 50,000 five-star reviews, and a long history of quality make TOTAL MOUNT a leader in its field.

Brand: Totalmount

👤The product works as intended. I have a headset on my computer. It seems very sturdy and has no fear of falling.

👤I have a headset that most stands don't work, but this one does very well with it.

9. HomeMount Headphone Stand Headset Holder

HomeMount Headphone Stand Headset Holder

The package includes a headphone stand. The HomeMount headphone stand is made of high-quality TPU, it's hard to damage, and softer than plastic, which can protect your headphones. The HomeMount headphone holder can hold more than a headphone, but also a controller or small item. The headphone is strong. The HomeMount headphone Hook is made of strong 3M glue. Don't worry about your headphones falling. It is easy to use, just clean the smooth surface, stick the headphone mount and wait for 1 hour to put items less than 1 kilo. Please feel free to contact them via email if you have any problems. The problem will be solved in 24 hours.

Brand: Homemount

👤It's a very simple item, but many get it wrong. The headset holder is made of high quality plastic and has the right thickness to hold the headset. The hook is wide to accommodate studio headsets which have a wide headband. The paint on the wall is painted nicely.

10. Stick White Headphone Hooks PACK

Stick White Headphone Hooks PACK

100% SATISFACTION: Their service team is always available to help and will respond within 24 hours. Don't hesitate, take the gaming desk home right now. The hooks are designed for full and even support of headphones. 7.5 lbs of support for California per hook. The heaviest headphones weigh about a pound. 3M Command strips are included with each hook. There are no tools or holes in the walls. Removes easily, no damage or mess. Not for wallpaper or wet locations. The plastic has a flat white finish. It's possible to mount on monitors, computers, desks, stereo cabinets, dorms, and office cubicles. Art museums, schools and libraries have minimalist modern designs. The desk stands and cheap monitor hooks are eliminated. The best choice is the headphone hooks.

Brand: Elhook

👤I was lucky to find these. I wanted to hang my steering wheels. I didn't want to put anything in the wall. There is a These wheels are used for "sim racing", so they have electronics and quick release mechanisms attached to them. The heaviest is 9oz. I weighed them because the hooks have a limit on their weight. There is a I did not do the same thing when mounting. I added another strip. I use the Command products a lot. It's a good thing. There is a We are now holding my steering wheels for five months. They still show no signs of weakness. I don't want my expensive rims hitting the floor so I check often. Chicken dinner was the winner. 2 years later, still going strong. A camper is very happy. It's a good thing.

👤I wanted to hang my headphones on my desk. It works well with Command strips. I am certain that this will work beyond my desk. I bought a second one that I use to hang hats that I need to wear for work. It makes for a convenient place for me to put the hangers so I can grab it before I leave. There are no problems with the construction of the hanger. I don't recommend using this to hang your controller. I recommend this for people who need a hanger to hang their hats or headphones.

👤It's great for my desk. I put it on the side of my desk. My headphones fell once, but they held my Beats perfectly. I believe it was due to the headphones being put on. The command strips do a decent job, but I would rather have 3m Tape. The product is great, but needs some better glue. It looks like you could add screws to the hooks, so you can put them on your desk. I'm not sure if it's pure speculation or not.

👤My husband and I are remodeling our house. We are working on organization since it was a bit of a mess since he is into computer gaming. We wanted something for him to hook his headphones on since he's been throwing them on the floor and he ends up running over his cord with his chair which isn't ideal. The hooks look nice and are easy to use. A normal hook wouldn't work because his headphones are large. We stuck this on the side of his desk so he could reach it. I was very happy with the purchase.

👤Picked these up so I could put my headphones on the wall next to my bed. The hook is a neutral white color that blends in perfectly with flat white paint, I was worried it might be blue or yellow, but it's not. There is a The command hook strips hang down and are not visible from the ground. I trimmed the tabs off because I don't plan on removing them from my wall. If you're looking for a temp solution for a dorm room or rental, look elsewhere or mount it on something you don't care about damaging, because that's what you'll get if you remove it.

11. Foldable Headphones Aluminum Wallmount Protective

Foldable Headphones Aluminum Wallmount Protective

The package includes 5 wall hooks, 10 screws, 10 anchors, 1 glue, 5 sponge pads, and 5 auxiliary stickers. The hook is 3 x 2.76 x 0.94 inches. The machined aluminum is capable of holding small and large headphones without bending or breaking. The front end of the ear hanger is flexible. Fix on with screws or hold the security side of your desk with strong 3M VHB two-sided tape. The screw should be used more firmly. All headphones can be compatible with Universal compatibility. It could be used to hold other things such as coiled-up cords, lightweight purses, or shopping bags. Storage that is space-saving. It's ideal for home, work, school, or cyber cafes to keep your headphones easy to reach. There is a foldable stand x 5 in the package.

Brand: Geekria

👤My son has an audible sensitivity issue and has a lot of headphones to help him. Managing all of these headphones was starting to be a challenge. While searching for a solution I came across this product and I am impressed with the quality of the products for the price. Many products that I've used like this would come undone quickly, so I was hesitant about using the pads. The pads are great. When you mount them, you can feel how solid they are. The pads are clear so you don't see a white pad behind them. A small touch but nice. I'm considering ordering more of these for other uses.

👤I wanted a clean mount for my headphones. It's hard to go wrong with 5 mounts, but I think they are a bit over the top. If you need to have them retractable, I would recommend removing the pivot screw and adding a bit of blue locktite to keep the screw snug, one of mine was loose and I think it would. If you're using them in an environment that would shake them, you might want to consider doing this. The product is built very well and I don't take any points off of it.

👤My desk is built from 80/20 aluminum. They are strong enough to keep out of the way when not in use, but slim enough to fit in a small bag. I can setup a slender shelf using these, they are open and have a depression which keeps items in their place even when bumped. All edges are smooth and the width is one inch. They are great for a variety of jobs.

👤I was looking for something to hold my headset in place. Many of the items I found on Amazon were made of plastic and didn't have a good look. The item is light and folds in when not in use. It comes with screws but also a very strong double sided tape. If your wall is made of cinder blocks or not allowed to make holes, this is a great looking headset hook.

👤I use these to hang up some items on a cabinet side. I hang headphones and other objects which I use on a regular basis, but which do not need to occupy desk-space. It helps to keep things organized. I used the supplied 3M double-sided tape to attach them. The manufacturer's recommendations regarding load-weight, surface etc. should be paid attention to. Will buy them again and recommend them to others.

👤The screws are junk. I tightened the pilot hole on the side panel of my desk. They're black, but don't go crazy on them.

👤It did not stick to my walls, but it did work on a flat surface. Before sticking, make sure the surface is clean. I really like the product. I can not blame the product for not sticking to the textured walls, as this has happened with other products as well. I like them and am happy. They fold up when you don't need them.

Summary

What is the best product for headphone wall mount white?

Headphone wall mount white products from Brainwavz. In this article about headphone wall mount white you can see why people choose the product. Bfz Homes and Enbiawit are also good brands to look for when you are finding headphone wall mount white.

What are the best brands for headphone wall mount white?

Brainwavz, Bfz Homes and Enbiawit are some of the best brands that chosen by people for headphone wall mount white. Find the detail in this article. Oaprire, Latomex and Tozo are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com