You can hang the headset and extra cable on the front hook and the back hook is used to hang bags. The band of your headphones won't be damaged by soft PU leather. The jaws of the clamp can open wide, and the protective pad can be attached to a desk. It is easy to install and a good solution to keep your cans from getting scratched. Distinguishing: The package includes: Headphone hanger x 1, hex wrench x 1, and a second one. Devices and accessories are not included.
👤It's a nice idea, but I put my backpack on it and it lifts up from my desk. It needs to be able to hold onto the desk.
👤My desk is very narrow and I needed a long piece of furniture. This did the trick, but barely. It is sturdy even so.
👤It's poorly designed so it moves around a lot, so you can't really tighten it.
👤It is easy to install a stand that will keep headphones and wires off the desk.
👤I hang my purse under my desk at work. It's better than those small purse hangers.
👤The product was good, but shipping took forever.
👤Arrives as described. It's helpful to have my bag and headphones at my desk.
The extra long arm fits most headphones. You can store your headphones with a wide headband. The raised part is designed to hold your headphones. No worry about falling off. This headset stand holder is made from high quality metal which makes it sturdy. It can support up to 11lb. Hang your headphones and other heavy gadgets. TheGroove Design is used for both a pole and a flat surface with thickness between 2mm to 38mm. The rubber pad is attached to the end of the clip. It's also suitable for cabinets, shelves, and glass flat surfaces. Direct use, no installation required, is easy to attach and use. You can put it wherever you want. The knobs can be twisted and fixed. No need to drill holes or apply glue. It's easy to install, remove or move. Promise 100% satisfaction: 6am is very important to customer needs and satisfaction. 60-day money back is promised. They are confident in their products. Please contact them if you have any questions.
👤It is a very convenient mount. It is possible to grab headsets on the fly. It's not necessary to pull it out of a bag. Check how thick your desk is before buying it. It is possible to fit up to 1.5inches. The holder is long. The ring fit controller mount sticks out 3.5 inches. If there is a lot of foot traffic, be careful. A nice upward curving lip. If you accidentally hit it, drop protection is great. It is a bit odd. The turn knob at the bottom is used for final adjustment. I have to grab the metal shaft and twist it to loosen it. It's most likely that you set it once and forget it. There's no additional custom tools to worry about. When you uninstall product, the cushion will not damage the table.
👤My partner got a new monitor. I thought it was silly, but it turned out to be very useful. I picked this up because I didn't want a new monitor. My desk is less cluttered now that my headset has a dedicated spot. There is a It's a hook for your headset and it does what it says on the tin. No tools are required to install. There were no complaints.
👤If you're going to put it somewhere you'll walk by often, don't get this. If you hit it, it will hurt, but it's sturdy once you put it on. I dislike logos, but that's not a complaint. Attach a sticker is an easy fix. It was easy to install. I can move it. There is enough space for me to put a second set of headphones or hang my earbuds on there.
👤I am happy I found it. I stacked the shelf units on top of each other to organize my food stuffs while I was in San Francisco, and I am using them to attach the two shelf units. I could dangle something from them because they fit my needs perfectly. I am very pleased with their quality and recommend them!
👤I was able to attach this to my desk so I could quickly hang my headset. I have been working from home for several years. I am always in meetings. I bought an additional desk to give me more places to work from. I wish I had bought one a long time ago.
👤I was a little worried that it would fall down, but it did and it supports more that I need it, and I don't damage the furniture.
👤I was looking for a sturdy hook to attach to the shelf in my closet. Using mostly for sleepwear. It's also handy when changing clothes. I didn't want something that needed to be screwed in. I overlooked the large clamp for the function I needed. It was white to match the shelves. Just what I needed.
👤It can hold all my gear. I bought it to put at work. I was too excited to wait until I got back to work. There is a Installation is quick and easy. I don't like leaving my backpack on the floor. I would love to have a hook at my desk.
If you have any questions or concerns, please contact them. They will be patient to solve your problem. The Universal Under Desk Hanger can be used on desks up to 45mm thick and as small as 5mm. It can be lain flat on the wall when it is not in use, folding or expanding at your convenience. It is easy to remove and re-attach the screw. Soft rubber pads on the ends of the clamps protect your desk or table from damage. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers, shelfs etc. It's great for hanging game controllers, cables and other gadgets. 60 days of money back is included in the Headset Holder Warranty.
👤My TV stand doesn't have room for the soundbar so I used two racks to hold it. The sound bar is 5 lbs heavy and supported by two racks. I'm happy it worked out.
👤I'm glad I chose this one because there are so many different models to choose from. It has a heavy, solid feel to it, and it has a nice padding on the arm so it won't damage the furniture. It folds up when not in use. Great product! I am an actual consumer, not a fake reviewer.
👤They are very well constructed. I attached them to the end of the stand that holds my TV. I put my sound bar on them. The sound bar is small enough to fit on them, so they can hold it in front of the TV. The sound bar could not be held on the TV stand because there was not enough room.
👤This thing is perfect. My boyfriend's desk has a small lip on the sides that hangs over the sides, but it is a vintage metal desk. Since these holders are mostly designed for desks with empty space below, I had to search through a million to find one that didn't require so much depth for the tension screw. It works great after finding this one. It's easy to install, but will still hold a large clunky headset. The photos have accurate measurements.
👤There are three people working from home, one of them is a gaming son. I'm running out of places to put my headsets, my son has a gaming headset, and I've got my headset for Teams. This particular hook is unique for a couple of reasons. I like the metal construction. It blends in with any black furniture or decor. If it happens to be in a high pass area of your desk or table, the folding design will allow you to get it out of the way. The ability to adjust the orientation from a vertical to horizontal one was a feature that made this a definite purchase. My desk is made of wood and metal and has a lip on it. The standard vertical style brace clap design is useless because it is short of the height of the table. I can't use boom stands with this table because of the other accessories I have. The only thing I had to do was remove the two allen screws and attach them to the leg of the table. It is now a permanent fixture. A huge problem was solved when I reached for my headset. I bought two of them for work and one for home. A great buy.
👤I always remain objective and honest when reviewing products. I always review with information that I feel others would like to know about the product, as I always assume what I'm writing will affect the purchase. I try to go beyond surface characteristics and input into quality, value and application. I will always end the review with an answer as to whether or not I would purchase the item again, which I believe is the most critical question pertaining to the item. Let me know if you want me to review your items. I was looking for a cheap hanging solution for my headphones and this product was the only one I could say anything about. I usually have my headphones on, but it can flip up when not in use. The screw base makes it easy to use for different sizes of desks. I'll probably buy another one for my daughter. It's a very handy device, serves the purpose well, and is cheap, but sturdy. You won't be disappointed.
Don't talk about your feelings: DeCLUTTER your feelings. The Big-J under-the-desk headset hangers can be used to clear up space on your desk and shelves. The headphone stand is made with high grade plastic and 3M VHB tape and can hold even the heaviest of headphones with ease. There is a phone stand and a cellphone holster. Smaller than a stand, it's more resistant to damage than other stands. No mess, no screws, and no need to remove the red VHB tape cover, you're good to go.
👤There is nothing wrong with it. It wasn't disclosed. You can see the 3D print lines on the surface. I am ok with it, just tell me about it.
👤I don't like buying a product that is 3d printed and doesn't show you the crappy lines running down the hanger. I hate cheap 3d printing that's being done in someone's garage, but the hangers is surprisingly sturdy and easy to use. If you put it in a more visible spot, it wouldn't look good.
👤My son's headset can't always be found on his bed or floor. It was a waste of money to put them under a shelf next to his bed. The glue is strong. We tried to move it to a different location, but it's stuck where it is. I think that's correct.
👤The stand is strong. Before placing the stands, I suggest to thoroughly clean the surface area. I put these under my desk to make it look better. Would buy again in the future. The items are low price will definitely recommend.
👤The initial sticky pad was strong, but I knocked it off with my knee. I stuck the sticky pad back on my desk after the hook came off. Good purchase.
👤It was very easy to install. I was hesitant at first but I am very happy with how things have gone. I like to keep my head seats hidden because I use a corner desk for gaming and work.
👤I was skeptical about the ability of the hook to hold things. It is pretty awesome after a few weeks of use. I put my headphones on and off all day.
👤These are clearly 3D printed, but they do the job you expect from them. Before you peel those strips, make sure you know where you want them and test them. It is a bonus if you get two. I have two hanging points, and they are both great. I don't know what the purpose of the smaller hook on the back side is but I've used them for my Sound Buds and they work for any in ear sports headphones which are wireless but have that "neck cable" for extra security. I would recommend it to a friend.
👤The little 3d printed underdesk headphone stand is very simple to use and has a cable tidy hook on the back which I use to tuck away my charging cable for my wireless headset. The metal band can sit atop the lip with the Arctis 7 being too small for it. I am very happy with this cheap stand.
👤I don't understand the reviews that say it's not sticky enough. What are you trying to do? Is it ice? The product is of a high quality. Unless you pull incredibly hard on it, you won't move. If it's installed correctly. What I was looking for. Don't be hesitant if you decide to buy this.
👤Absolutely brilliant. I hung my headset under the edge of my desk. Has done the job well.
The drawer comes with a limited 3-year manufacturer warranty and friendly tech support to help with any questions or concerns. It is suitable for laptops and almost any device that is less than 46mm /1.8" thick. There is a scissor mount option. The included screw mount hardware can be used to fix the hangers under the desks and shelves. You're good to go if you wait a minimum of 2 hours. The strongest version of 3M VHB tape is what they use. The max weight for lighter items is 2lb / 900 grams. Do not place on painted walls or painted walls that are painted. TheSECURE TRIPLE BRACKET SYSTEM: Ensure your devices are safe and secure by using the third bracket. Non-SLIP FOAM PADS are not made of sand. Their holders will not scratch your gear like other metal ones do, and you can get foam pads to protect your devices when you slide them into the brackets.
👤I ordered these to mount my audio recording interface under my computer desk so I can use it while I'm sitting. I was expecting molded parts, but found them to be just 3D printed parts. The brackets themselves seem sturdy, and the hardware that comes with them is fine. The foam pads and sticky tape made placement easier. Right. I put the Tascam unit under the desk after removing the plastic from the tape and holding the brackets on either side of it. The tape would have held the unit on the underside of my desk for a long time. There is a The "holes" they designed for the screws and pass through of your screwdriver/drill bits are not large enough for my bits to reach through, which is my main issue with this kit. I had to use a smaller driver to put these into the desk. If they had made the holes round and of decent diameter, I could have used my screwdriver to quickly fix this. Since the brackets are thicker than the drill bit, it was not easy to pre-drill my holes for the screws after sticking up the brackets. I had to pry off the brackets after marking the mounting hole locations, pre-drilling my holes, then hand-screwing the screws, making sure to line up the brackets as I went so the sticky tape landed in the correct spots. The brackets seem to work well, and did the job I ordered them for. I modified them by drilling some holes on the sides for pass-through screws to hold the Tascam rigidly in place, or by making volume adjustments with the knobs.
👤The screws that came with this made it look great and felt solid. The pacing included doesn't seem to keep the plastic from scratching my laptop over time. I ordered extra padding to make up for it.
👤The description didn't say it was 3D printed. I would have printed it myself if I wanted something that was 3D printed. I don't want to have to worry about something failing like 3D prints do. I can't risk it in the long run, but it feels sturdy enough to use for now. Will be replacing soon.
👤You may have to cut out the middle support to get cables through if you plan on using 3 brackets.
👤I have a wooden desk that I can't drill through and a Macbook pro that I can't suspend. It's important for obvious reasons, but also because my dog sleeps under my desk. The 3M VHB tape gives me peace of mind.
👤I need to read the reviews. I jumped at these because they were metal and I had purchased previous items from this manufacturer. These are 3D printed plastic mounts, not metal like the brainwavz headphone mounts. I'm sure I can use them. I am not mounting an £800 piece of kit with 3D printed mounts. There is a The design is good, so please make them in aluminum, double the price. I will purchase them! The bag they came in was open and all the parts were strewn across the box. None were broken or missing.
Promise 100% satisfaction: 6am is very important to customer needs and satisfaction. 60-day money back is promised. They are confident in their products. Please contact them if you have any questions. The dual headphone hook design makes it easy to reach your headphones and keep your desk clean. The living room, bathroom, closet are some places where this headset hook can be used. You can hang items with it, such as clothes, towels, bags, headsets, hats, belts, etc. The modern black color is very similar to several types of home styles. This headphone stand under the desk is easy to install, you can tighten screws with aPhillips screwdriver or use an electric drill to lock screws into the desk or cabinet surface, sturdy and durable, or you can attach and press with force. The headset hanger is made from high-quality aluminum alloy and has a speciality of heavy-duty, rust-proof, scratch-resistant, and durable to hold two sets of headphones simultaneously. The raised end of the headphones keep them safe from scratching and dropping. The headset holder is made of sturdy aluminum alloy and can hold a variety of headphones. The APPHOME Headset Holder has an 18-month worry-free and friendly guarantee. You will also get an extra glue and two screws.
👤I got this particular one because it said that it had screws. I wanted to make sure that I could fit the backpack and headset into my desk. It is impossible to fit a standard screwdriver or drill in between the gap in the base and the hooks because the hooks are as wide as the base. I had to do a lot of McGyvering to get this thing attached. It seems like it's sturdy now that it's attached, but it's just a garbage design when it comes to ease of installation.
👤I'm very happy that the hook is staying up. It was frustrating because I stuck it up with the glue and it kept falling off. I tried the new one after taking the time to remove the old one. It's stayed up since then. My kids use it and are not gentle and it has been up for a month. Having a place for their headphones is great. I keep it by the charge so they can charge it. Love it. I'm glad I didn't have to use the screws.
👤I put them on the metal legs of my desk. Even though the desk was brand new, alcohol was used to clean the legs. I attached it and let the glue set. I put the cables on it. It was on the ground a few days later. Came right away. The glue doesn't hold. I am happy I did not put something expensive on it. Disappointed.
👤The hook and the glue are strong. I didn't have to put it in the desk. The time was quick and easy. I have no issues with my headphones hanging on the hook. The item was a great purchase.
👤Something has to be way above and beyond for me to write a review. This is solid aluminum and it's cheap. You can't wear it out or break it, and it looks great for 7 dollars.
👤The table was placed under the gaming chairs. We were optimistic that it would work after many broken headphones. It is very easy for the kids to hang the headsets on there and it is very sturdy. We didn't think to do this sooner. Highly recommended!
👤It seems pretty sturdy. If your headphones are heavy, I might drill it in if I get bored. The issue you should be concerned about is your headphones hook. I have two headsets: my oculus rift headset and my Logitech g930 gaming headset. Not worried at all.
👤This item was used to get the headphones off of the desk. Great purchase.
Customer service is great. Give it a try. You can return it within a month if you don't like it. They will send you a new one if it is faulty within a year. Universal under design allows for a near universal fit on most desks by attaching a thin, narrow, and thick piece of metal to them. It is easy to remove the Spring Clamp. The audible headphone arm swings underneath your desk for discreet and non-intrusive storage and swings back out for easy access. BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Soft rubber pads are located on both ends to protect your desk or table from damage. The under desk mount is convenient for storing. Easy installation of a springed C Clamp.
👤We needed a better solution to keep our headphones from breaking and this was our answer, it's very sturdy and feels very well made, it's even better if you have an xbox one controller, it's even more perfect. My purse is probably around 10 lbs. I'll probably order more for myself and gifts in the future. Highly recommended.
👤The hook portion can bend if you put a lot of weight on it and it is very cheap. There is a The head doesn't lock up. The clip is not tight enough to prevent desk steps that are less than a quarter of an inch from moving. You can get a Brainwavz Hengja Hanger for the same price that has better construction quality. I would've gotten a second one, but I got this instead when the page from my old order suddenly said out of stock and started directly to a screen protectors. I wouldn't buy it again. Cheap, poor construction, plastic bends, top sticks up a lot. A bad product.
👤It's easy to put my headphones out of the way. I didn't want one where you have to use glue or screws. You don't need a heavy duty one if you have light headphones. The mount has a sufficient amount of space. The desk is protected by the padded clamps. The mount has a hook so you don't lose your headphones. You can choose which direction you want to hang your headphones. The cord clip is nice, but it's stiff, so I just wrap it around the hook and grab my headphones when I need them.
👤This thing is great. I was embarrassed that I didn't think of getting this a long time ago, but I did not know it existed. Maybe it didn't. I am a recording artist and I use expensive headphones. They were not taken very well care of in the past, as they would flop around on various surfaces. The device is easy to set up and I like that the hook can be changed to hang things or not. I think it's a good deal so that I can get another one for my other cans. I recommend this to anyone who wants to protect their investment.
👤It was easy to put in place. I got this because I was sick of my headphones laying in random places. The hook is neatly underneath. The picture doesn't show it, but there is a small loop for a cord to go through so I leave my charging chord handing from there so all my cords are close together and easy to manage. You can put the headphones on the hook and swing them out of the way under your desk. I put one on the side table for my headphones.
👤I didn't expect to write a review on this. I thought I knew what I was getting. This is a cheap, easy to scratch plastic. The cable clip would be better not there. The only. The mechanism for twisting the hook into different positions is a nice thing about this. You only need to rotation from 90 degrees and 180 degrees. The hook is pretty loose and you can position it anywhere from 0 to 180. I would have given it a pass, but the junk quality means it should be a lot cheaper than other METAL items. It would be a good deal at five bucks, since I got it for twelve ninety nine. If you don't know better, maybe eight. No way in over ten. I'll probably keep it because it's not worth it with the Pandemic. It will have to do.
The marble base can be assembled with the simple tools included in the hardware pack. The rotation is done at a certain degree. The stick headphone hanger can be applied to different positions. Can paste under a table, under a desktop, under a cabinet, and on smooth surfaces. Headphone cable organizers. The headphone hook with the headset cable organizers can be used to make your desktop more tidy. Quick install. The holder has strong double-sided tape. Please hang your headphones after 24 hours to make sure the suface is dry and oilless and to make sure the hanger is firmly stuck. The hook of the headphone holder stand is made of rubber. The leather of the headset head beam needs to be kept free of the hook. It is wide compatible. The table headset hook supports all sizes of earphones. B&O H8/ H4/ Beoplay H9i, beyerdynamic headphones, B&W headsets, HyperX Cloud II's, Astro A50, Ra zer Gaming Headphones, Logi tech Headphones, Audio Technica headphones, R OG gaming headsets, etc.
👤I gave one as a gift. The mount comes with an extra sticky pad so you can move it to another location if you want. The material is sturdy and doesn't feel cheap. We've bumped into it a few times but it hasn't broken or anything, but the mount is most likely going to fail given the weight. The mount can be used in many different ways, and it is very versatile. I've seen other options that aren't gaming headphone stands that take desk space, and plan on buying one for myself.
👤The item cannot be placed on the underside of the desk. For a few days, the glue stays. Twice, I used up the two patches that came with the product. If the base is mounted on the top side of the desk, this item will work. This takes up space on the desk surface that I didn't want. The product did not work as pictured, even after following the mounting instructions exactly. The device will not hold the Apple AirPods Max. Don't buy.
👤I have a white desk and a light grey chair, and this is the perfect accessory for it. The design is simple and quality. If you clean the surface before applying the glue, it will cure in 24 hours and be very strong.
👤The rotation feels great, it feels like clicking every 90 degrees. It was easy to install the included glue under my desk. It's easy to set the headset on when I work because I rotate the clip out. When I'm not working, I put it back under the desk so no one accidentally bumps into it. I used to have to reach under the desk to get to it. The double-sided cord clip is great to have because it allows you to clip in a headphone cord as well. If you need a power cord. The clip is a little flimsy. When I plug the headset into the light pull, I have to pop the cord back into the cord holder, which is an extra step. I would like the cord to stay in the clip.
👤The glue is terrible. Will not hold instuction to let the glue set for 24 hours, it did not work after 2 days. Might as well drill through the base with screws. You're better off with the screw style. There was an update on 2/7/2022. I did what I suggested a couple of weeks ago and it worked. The company made contact with me after modification and offered to send me a replacement. I said no because I accomplished the above and didn't need another one. They still wanted to give me a refund and send a new design with a scew shaft. The design worked better and the original cost of the order was returned. I increased my rating from 1 to 3 stars because of their customer support. You don't hear about it a lot these days.
👤I bought two of them because I liked this. They were easy to install. I had to store my headphones on them and I had to make sure it was good. One of the holders fell about three months later. I stuck it back up after I wiped the dirt off the spot it was going on and it seems to be holding up. I will switch out the glue if it falls again. The different ways in which it is held makes it easy to remove it from the way.
Two preset heights give you maximum control over the level of your computer screen to improve posture and prevent neck and back pain. There is a notice. It is not possible to use it for painting a wall. If you paste to the wall, it will fall down. Make sure the surface is smooth, dry and oilless, and hang your headphones after 24 hours to make sure the hanger is firmly stuck. 500g is the max total weight. The headset holder with a magnet can be used when it is not in use. The arm of your headphones is covered with a soft rubber pad to protect it from slipping and scratching. The headphone hook has a strong sticky design, which can be applied to any smooth and clean surface. Hold your earphone in a firm position. Remove the sticker and stick it under your desk. It's great for hanging cables, hats and other gadgets to the kitchen counter, bookshelf, studio and company. A multi-purpose hook. The under desk mount is compatible with almost all wired and wireless headphones.
👤Does what it says it does. No issues.
👤I like the design. It's easy to hide and doesn't get in the way. It flips closed when you don't use it for headphones. It was easy to install, just remove the paper from the device and stick it on the spot you want it. The second adhesive pad they sent will help if The adhesive ever wears out. Overall, a great purchase, it does what I wanted it to do.
Universal design - hold your headphones and controllers in one place. It applies to a bag, umbrella, backpacks, keys, cables, etc. To accommodate accessories, please adjust the little arms of the hanger. 1 Hanger Holds 2 The dual arms of the headphone hanger can hold two headsets at the same time, keeping your headphones organized and ready to use. It is compatible with all headphones with their headbands within 1.37inch. The headset hanger is widely used under the glass, wooden or metal desk, table, shelf, cabinet in the home, office, dorm, cyber cafe and other scenarios. It could also be used to hang other items, such as purses, shopping bags, umbrellas, etc. A neater environment will be created with this hook. The design is user-friendly. The mount is lightweight and sturdy with premium aluminum, so that it won't break even if you hold the heaviest headphones. The raised tips on your headsets prevent them from falling. When you need to replace something in unforeseen circumstances, you will be able to do it with extra glue. Two mounting methods. The headset stand can be mounted without causing damage to the desktop surface, and it can hold up to 4.4 lbs. With screws, the headset hook could be installed for more firmness. Choose the installation method that is right for you. You can get a refund within 60 days or a free replacement within 12 months if you have non-human reasons. You can contact them via Amazon Messages if you have any questions.
👤This double-hook headphones holder does exactly what it is supposed to do. It holds two pairs of headphones side by side. The double-sided hook makes it easy to store and remove your headphones from underneath a desk or shelf. I gave the Adhesion category a 4-star rating, since I have only been using it for a week and it has a tight seal. I am confident that it will be long- lasting since it is made with a 3M adhesive and includes a replacement strip. There is a It is recommended that you allow 24 hours for the glue to seal completely before hanging your headphones. This is part of the instructions. I purchased this one because of its design quality and price, and I am very satisfied. I hope this insight helps you make a buying decision, as I am not an employee of this seller or a representative of this industry. All the best!
👤I couldn't find a way to hang the heat gun on the side of my crafting table after I bought it. Many of the headphone hangers are plastic or foam, and I thought they would be perfect. This one is made of metal, not plastic or foam. It's the perfect size to fit under the edge of my crafting table for my heat gun. The gun is held with the nozzle up so that the heat won't affect the motor. There is a This comes with a glue to stick it on, but also a couple of screws to put it in my table. This isn't designed for this purpose, but it fills the bill perfectly.
👤I wanted to hang my headphones under my desk. The desk has a smooth bottom that should accept the included glue, but I decided to use the included screws just in case. It was difficult to install the screws due to the design of the headphone hanger. Since a screwdriver cannot be driven at a straight angle, the screws need to be put in at an angle. I predrilled the holes for the screws, but since the screw goes in at an angle, it sheared the screw off. I was disappointed that the screw sheared so easily, and the design made it nearly impossible to install the screws, because I was using a hand screwdriver to drive the screw. It is a good material and slightly smaller than I thought.
👤I like that it's double sided and works well for my purposes. It will be too narrow for some headphones. I found the measurement listed to be accurate. I only use this to store one pair of headphones and the other hook for hanging cables that aren't in use. I would like to secure it with the screws provided, but unfortunately the way it's designed makes it difficult to approach from an angle. I'm not sure how you could get the screw all the way in. You would need to drill a hole before you install the glue, and poke holes through it, so that's something to keep in mind. Unless you plan to put something heavier on this, it's not necessary. I wouldn't try to use the screws for something like a bag hook because they are small and mount from two corners.
Simply screw tight Suspension to secure it to a desk. Extra anti-slip security will be provided by the rubber layer between the clamps. It's a good fit for Bose, Sony, Sennheiser, V-Moda, Plantronics, Audeze, and all other headphones. It could be used to hold other things. The max weight is 5 kilograms. There is a spring-loaded and an adjusted Clamp. The dual headphone stand holder has a c-clamp that can fit most desks or shelf boards up to 39mm in thickness. They can split the hooking stations. It is easy to install, remove and reattach. The under-desk headphone hanger allows you to adjust it to any direction. You can put 2 headphones on it at the same time if you change the hooks. Swings underneath your desk for discreet storage and swings back out for easy access. The headset mount holder is made of plastic and can hold up to 1 kilo for each hook. The anti-skid pads prevent the surface of the desk from being scratched and the leather of the head beam from being scratched. Holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Universal under desk design allows for a near universal fit on most desks. There is a new word for it. The Spring Clamp is easy to remove. Not only for storing all kinds of headphones, but also for headsets, glasses, and bags.
👤There is enough room for my work and gaming headset at the base. The product's build quality is great, it feels sturdy and the spring holds it tight to your desk top. There is a It's great if you like to rearrange things. If you find a position that doesn't work for you down the road, you don't need to use screws.
👤It's easy to install. Pull and place where you want it to go. I love it! If you want, you can put your controller on it.
👤I love that it came in white and my headphones are no longer crowding my desk.
👤It works the same as the pictures. I use it to hang my headphones.
👤It is perfect! There is a It does its purpose and is great value. There is a If you want a quality product, choose this one.
👤The holder is designed to clip to the edge of a desk or shelf and can hold one or two headphones. This holder uses a spring-loaded clamp, which is different from other holders that use a screw to tighten. If you have carpal tunnel or arthritis in your hands, the spring may need too much force to open. The low profile of the clamp makes it stick out 1.5 in along your desk/shelf. The part that holds the headphones is made of two pieces. If you only have one earphone, or if you have two, this allows you to keep them together. There is nothing that makes you want to have the two arms at 180 degrees from each other. The rotation of the headphone holders gives them more flexibility in positioning. It doesn't take much force to change the arms at 90 degrees. The arms of the headphones have a lot of space. I am using this with headphones that are relatively light, but this should not be a problem. There is a I give this 5 stars because of the low price, sturdiness, and flexibility.
👤I attached my video so you can see how it works better. The desk is already set up, you just have to open the stand and slip it on the desk. The two handles can move in either direction. I tried to put my controller on it, but it didn't hold it well, I keep my headphones on. The arms are thick and not made for it. I wanted it to work. If you never tap it, you could keep a controller on there. It's a word. This is a plastic one and that is not an issue because you are never putting a heavy object on these. I can take it off and move it whenever I want.
Under desk headphone mount white products from Oriolus. In this article about under desk headphone mount white you can see why people choose the product. 6amlifestyle and Apphome are also good brands to look for when you are finding under desk headphone mount white.
Oriolus, 6amlifestyle and Apphome are some of the best brands that chosen by people for under desk headphone mount white. Find the detail in this article. Brainwavz, Brainwavz and Apphome are also brands that their products are worth to check.