Best Under Desk Headphone Mount

Mount 26 May 2022 10+ Comments Open

1. Yocice Under Desk Headphone Aluminum Headphones

Yocice Under Desk Headphone Aluminum Headphones

There is a 2 year satisfaction guarantee forValuable gift for Christmas, Thanksgiving day, Easter, Birthday, Valentine's day and more. Hook can hold up to 10 pounds. The heaviest headphones weigh about one pound. 3M VHB tape is used to adhere the aluminum material and soft silicone pad. One headphone hanger with 3M VHB tape. mounting on computers, desk and wall is durable.

Brand: Yocice

👤The frame doesn't bend without some force applied to it. The color of the product is great, but it doesn't scratch easily, like some other products that will scratch and ruin the look. Installation is the easiest thing in the world, stick to the spot, good to go. There is a There are pros and cons. My circumstance doesn't allow me to use the provided screws to install the hook. I bought this product because it came with a sticky pad. I have headphones that are not much heavier than the ones I use. The sticky pad didn't stick for long. It may have started peeling away from where it was placed a week before. I thought it might have been a mistake, but it wasn't. It's a very simple fix, I just bought better double sided tape and I haven't had an issue with it after that. I had to go out of my way to make it better, so I had to dock it some stars. That may be useful information for some people. The tape was not very good, but I am happy with the rest of the product. There is a This style of hook is perfect and many prefer it over the above desk ones. If you are able to do that even better, the color doesn't chip away, and the material comes with screws if you are able to do that, I would recommend this product over others. If you plan on using it that way, you should install a better quality double sided tape.

👤I didn't expect the glue to bond to my desk to be welded on. I am either weak or it has its own pull that was reinforced using superglue. It's important to plan where it's going to stay.

👤I put this under my desk with the 3M double sided pads. It is small but works for my G930's. The material is very strong. There is a The best part is that they included small clips. I was able to run the charging cable cleanly underneath my desk. There is a Overall happy. It was a bad deal for the quality.

👤I stuck it too close to where my legs were, and it would occasionally hit me. It sticks very well if it does what it's supposed to. The HyperX Cloud II headset is in place.

👤I can't stand the amount of stuff on my desk. I did not want a headphone rack because it was at risk of being knocked over. The metal is heavy for its purpose and won't bend. The mounting tape did not work. I used the screws that came with it. It was kind of annoyed. I didn't want to put holes in my desk. Overall happy with it.

👤The purpose of it is to serve as a headphone hanger. It is made of aluminum and feels sturdy. The only reason I'm giving it two stars is because it's not as advertised. There are 4 holes in the hook. Two (2) are located in the center of the hook and two (2) are located towards the top of the hook, which has slots to allow sliding the hook onto screws. I don't care if it's not what I ordered, since it does its job and I don't see it under my desk.

2. APPHOME Aluminum Adhesive Headphone Headphones

APPHOME Aluminum Adhesive Headphone Headphones

Promise 100% satisfaction: 6am is very important to customer needs and satisfaction. 60-day money back is promised. They are confident in their products. Please contact them if you have any questions. The dual headphone hook design makes it easy to reach your headphones and keep your desk clean. The living room, bathroom, closet are some places where this headset hook can be used. You can hang items with it, such as clothes, towels, bags, headsets, hats, belts, etc. The modern black color is very similar to several types of home styles. This headphone stand under the desk is easy to install, you can tighten screws with aPhillips screwdriver or use an electric drill to lock screws into the desk or cabinet surface, sturdy and durable, or you can attach and press with force. The headset hanger is made from high-quality aluminum alloy and has a speciality of heavy-duty, rust-proof, scratch-resistant, and durable to hold two sets of headphones simultaneously. The raised end of the headphones keep them safe from scratching and dropping. The headset holder is made of sturdy aluminum alloy and can hold a variety of headphones. The APPHOME Headset Holder has an 18-month worry-free and friendly guarantee. You will also get an extra glue and two screws.

Brand: Apphome

👤I got this particular one because it said that it had screws. I wanted to make sure that I could fit the backpack and headset into my desk. It is impossible to fit a standard screwdriver or drill in between the gap in the base and the hooks because the hooks are as wide as the base. I had to do a lot of McGyvering to get this thing attached. It seems like it's sturdy now that it's attached, but it's just a garbage design when it comes to ease of installation.

👤I'm very happy that the hook is staying up. It was frustrating because I stuck it up with the glue and it kept falling off. I tried the new one after taking the time to remove the old one. It's stayed up since then. My kids use it and are not gentle and it has been up for a month. Having a place for their headphones is great. I keep it by the charge so they can charge it. Love it. I'm glad I didn't have to use the screws.

👤I put them on the metal legs of my desk. Even though the desk was brand new, alcohol was used to clean the legs. I attached it and let the glue set. I put the cables on it. It was on the ground a few days later. Came right away. The glue doesn't hold. I am happy I did not put something expensive on it. Disappointed.

👤The hook and the glue are strong. I didn't have to put it in the desk. The time was quick and easy. I have no issues with my headphones hanging on the hook. The item was a great purchase.

👤Something has to be way above and beyond for me to write a review. This is solid aluminum and it's cheap. You can't wear it out or break it, and it looks great for 7 dollars.

👤The table was placed under the gaming chairs. We were optimistic that it would work after many broken headphones. It is very easy for the kids to hang the headsets on there and it is very sturdy. We didn't think to do this sooner. Highly recommended!

👤It seems pretty sturdy. If your headphones are heavy, I might drill it in if I get bored. The issue you should be concerned about is your headphones hook. I have two headsets: my oculus rift headset and my Logitech g930 gaming headset. Not worried at all.

👤This item was used to get the headphones off of the desk. Great purchase.

3. Headphone New Earphone Supporting Headphones

Headphone New Earphone Supporting Headphones

The new bee stand is compatible with all sizes of headphones. The aluminum headset stand and rubber foundation are sturdy. The desk should be dust free and flat when you place the headset holder on it. This wireless headset stand is great for home, office, studio, bedroom or next to your TV. The gaming headset holder is small, light, and most important, it's a unique fashion style. Don't order it. If you have a problem or suggestion, please contact them, they will be more than happy to help.

Brand: New Bee

👤The packaging was simple, sweet and complimentary. There is a It was easy to put together and works as advertised. I recommend this product if you want to display your headsets in a neat, compact way for the customer. I got two photos. This review was written again because of Amazon.

👤It's small and lightweight, but it's also very inexpensive, so for how little I paid for it, it does it's job well. There is a If you have large headphones or a cat that walks across your desk, there is a chance that your phone will tip over. There is a There is an edit. The foam on the band of my husband's headphones don't go away because of the stand pressing into it, and it has been used for about 6 months. It doesn't change the comfort of the headphones, but it makes them look worse. If you have nice headphones that you want to keep pristine, I recommend spending a little more for a curved stand because I use one for my headphones and do not have any indents. There is a If you don't care, this is a great stand that is very easy to use.

👤I bought a lot of these for storing and displaying headphones. I was pleasantly surprised by how well made these are. The wide and flexible piece on top of the headphone rests is made of TPU, which means that nothing will get scratched, and the top part of the rests is made of rubber. Some headphones have cheap foam pads up top so resting them on a thin pole or peg will usually damage them. It's not an issue with this stand. It's one of the cheapest ones. The base, post, and top are made of plastic with rubber pads. I know how good these are, so I can't imagine spending more.

👤I bought this to keep the headphones on my desk from getting thrown around. This device is very strong. There is a The unit is light and stable, even though it wouldn't stand up with headphones on. The base and stand feel like plastic and metal, respectively. The rubber top gives the headphones a good grip. There is a I am very pleased with this item. I have purchased 2 more of these.

👤There is no quality in construction. I got an $8 dollar stand after paying $8. There is a The stand can't support heavy headphones or have enough clearance for cable without causing stress to headphones. You should buy a stand that is worthy of your headphones. Is that true? The construction is cheap. The unit is assembled. The plastic that contacts the headphones bends easily. The plastic piece that is supposed to cradle the band is only three quarters of an inch in width. The stand has no width and makes an indent on the headphones. It will lead to pain. There is a The stand is too small for my headphones. I don't want my headphones to be hammed by the pressure on the cord and port. There is a Buying something else and returning.

4. 6amLifestyle Headphones Headset Holder Headphone

6amLifestyle Headphones Headset Holder Headphone

It's simple and elegant, and makes your headphones well-displayed when not in use. Make your desk tidy by freeing up your space. The Silicone pad and aluminum headset stand are made of anti-scratch material. Two mounting methods with a strong Adhesive tape or 2 screws are easy to install and look good in any setting. Headphone hanger mounts can be used on a wide range of surfaces. There are under desks, tables, shelves, wall cabinets and shelving units. It's compatible with all kinds of headphones, such as wired headphones, wireless headphones, children headphones, gaming headphones, TV headphones and so on.

Brand: 6amlifestyle

👤I use this to hold an Arctis headset. It hangs in front of the tower because it is attached to a desk. I didn't use the glue. Pre-drilling holes into the desk is recommended if you are attaching with screws. I like the subtle shape, the slight grip of the silicone pad, and it could comfortably hold a headset larger or smaller than mine. There is a The flat plate on the top of the desk is something I would change. I would like to see an alternate model that was larger and more similar to the one on the desk. You install the two screws, then slide the mount on and pull it forward. If you put it from the front you risk it sliding off the screws. It's not a big deal. It's not an optimal design choice, I see why they made it that way. There is a I'd buy it again if I needed a similar setup.

👤The screws broke. Not my fault. There is a The design makes it difficult to get the screws into the desk. The screw tip fell off after the holes were set. It was so weak that it broke into metal powder. I show photos. I had to dig into the wood to get the screw out of my desk. I show normal screws for comparison. The screws are narrow to get the mount to work. I gave up trying to adjust my other screws after about 20 minutes because they were too large. I would use glue, velcro or glue and glue over the garbage mounting options they give you. There is a The rubber part covering the hook is of good quality. Good quality is probably the only thing that's good in the unit. The metal is painted so lightly that it will chip easily. I scratched one side before putting tape to cover it, like I screwed for 2 seconds. If you want to install screws, please put tape on the edges to avoid scratches, but you can use a Sharpie or paint markers to touch it up. I don't think the metal will break like the screws. They dress up to look nice. The reviews here are not critical of what you're actually getting. It would cost about 10 cents to make in China. It's a better design if you want an under the desk hook, not on the side of the desk. I would have returned it for the poor quality if it had cost more.

👤It was really solid. Glad they use 3m tape, it works better than most others. I attached it to 2 sides and it barely moves, so I can put a lot of force on it. I use padding around the band. It fits with what would be recommended. The desk is black. Make sure you clean the area before applying and if possible mount in a corner where you can take advantage of both mounts. When mounting, make sure you press down hard. Press down on the flat surface to make sure the mount is properly adhering to the headphones hook. Many people forget to do that with 3m tape.

5. Headphone KAFRI Earphone Charging Accessories

Headphone KAFRI Earphone Charging Accessories

Premium quality is made of aluminum metal. 60 days of money back is included in the Headset Holder Warranty. Double Headphones Hanger can hold two headphones at the same time, with a headband width within 2.1inch, such as a gaming headphone, children headphone, and so on. You can charge your smart device without a plug in wall with the 3 Port SmartUSB Charger. It can detect your device and deliver its fastest possible charge speed up to 2.4 Amp per port or 4 Amps overall. The lights are RGB. The RBG Headphone Stand can display 9 colors changing effects to create an amazing game atmosphere at your preference, that can be selected by pressing a Touch switch. Great gifts for men and women. Fire-resistant and hardened plastic outer shell, build-in premium circuitry and microchip ensure device safety. A multi-protection system protects against overload, short-circuits, over-current and other charging issues. If there is a quality issue with this headphone rack, please do not purchase it.

Brand: Kafri

👤It's a nice idea, but it doesn't live up to the potential. Is a decent job holding on to the desk, not sure if it will take too much weight. The lip at the top is not more than 1/2 inch. There is a flaw in theusb C port It won't register as charging my phone, but it will charge my ear bud case. I didn't return it because of that. The swap for a better power supply didn't help. It doesn't provide enough power to the port. The charging cable on the A port does not generate enough juice to quickly charge my phone. Pressing and holding the button will shut off the light.

👤I am always on the phone. It's helpful to have a place to hang my headset in my desk. There is a I like that I can charge a few devices here. There is a I don't like the fact that there is a circle of light on the front. The light is in motion. If you have this in an area where you sleep, it could keep you awake. The light show could make you sleepy. I'm not sure if it works that way, but I'm trying to see the bright side. I made a new year's resolution to be more positive.

👤There are no options for one color or different modes in the RGB lights. I don't like them but the rest of the things are very well made and I have to give it 5 stars. The hub is nice. I mounted it under my desk because it was strong enough to handle. It's under my desk to hide the mess of wires.

👤If it fell down immediately or within 20 minutes of installation, it wouldn't be possible to hold onto the table and plug in to the wall at the same time. If your space is set up just right, you're good, but other than that, good luck! I felt like the item was false in the description.

👤The convenience factor is great. The attachment screw is set up to be too close to the brackets, which is a manufacturing defect. Result: The cheap plastic cap on the end of the screw makes the device slip off with the smallest of movements, like hanging a set of headphones.

👤I own a few pairs of headphones. A mic and tooth for my phone. I think they fit on my desk. The unit is held sturdy by the clamps. It is handy to have both the 2 and 1 charging ports. The light is funky. It would be nice to have the option of turning it off, but I can set it to whatever color I want or let it spin through the various colors. I am very happy with the purchase. It gets my headphones off my desk. I highly recommend it.

👤It's a great addition to my set up and helps me keep my headphones organized. I love that the lights can be turned off and that the extra outlets are clutch. I have been using it for almost a month and it has never moved. The plastic feels cheap but I can't complain about the price.

6. Headphone Link Dream Organizer Headphones

Headphone Link Dream Organizer Headphones

The Link Dream is a dual headphone and cable clip organized stand that can hold messy headphones and support two headphones at the same time. The headset holder underside desk can be mounted with screws or 3M VHB tape. This small headphone hook with cable clip is small enough to fit in any desktop space, giving you more space and keeping your desk organized. It's compatible with all wired and wireless headphones. The hanger could be used to hold other things. Link Dream can be installed almost anywhere, it has a 3 year warranty. If you have any suggestions, please do not hesitate to contact them.

Brand: Link Dream

👤Everything as promised. The aluminum material works. Comes with extra sticky pad. A wipe to clean your surface before sticking to the device. There is an extra screw. How respectful. There is a If you plan to use it on a surface, you should get your own screws because the included ones don't work. Yeah... The head of the screw falls through the hole. I'm not sure how they let that one get by. Every screw is the same. I had screws for door hinges that worked well. smh... It was so close to perfect. As long as you weren't planning on relying on the included screws, it's ok.

👤This is a piece of aluminum that is shaped to hold headphones. It does well in this task so far. My only question is if there are 2 screw holes where you stick it to the desk or shelf. I'm not an expert, but if you don't have a small right angle screwdriver, you're not going to be able to attach it with screws. The design would have been better if there were no holes. I'm happy that it's holding for the time being.

👤A very strong hangar. It's small for my high end headphones, but can fit one on them without the other hanging off the edge. They fastened it tightly to the bottom of the desk and have no worries about it coming loose. I don't want to risk putting 2x $200+ headphones on just double sided tape, but I also don't want to risk dropping $400+ worth of headphones for 40 seconds. There is a Why 4 stars if you liked this so much? Again, too small. They would be perfect if they were 12 taller and wider. The build quality is great.

👤The screws the manufacturer provided were too small for the holes. I decided to screw the hanger to the underside of my desk because I didn't want to use the double sided tape. The screw heads were so small that they slipped through the holes. I had to dig around in my own collection of screws to find an appropriate size for this holder because there was no way I could use the supplied screws. There is a The holder is worth 5 stars, but I only give it 3 stars due to the incorrect screw size.

👤I initially bought this to hang my PS4 headset on the coffee table so that it wouldn't get in the way. I bought another one to keep my headset out of my desk. I'm going to buy another one so I can use it as a purse hanger instead of leaving my purse on the desk. This little tool is helping me organize my home.

👤I love getting things like this. It is simple, sturdy and does what it is supposed to do. The glue is strong. Once cured, this thing will not budge. Before you adhere it, make sure you set where you want it. I love the texture of aluminum. I don't use the little notch for the wire since I'm using wireless headphones, but it's nice to have it if I ever hang some on there

7. APPHOME Headphone Aluminum Accessories Workplace

APPHOME Headphone Aluminum Accessories Workplace

1 year warranty. The XTRONS DVD Player has a 1-year warranty and professional technical support. They will reply asap and ensure your rights and interests, so please don't hesitate to contact them via email. The dual headphone hook design makes it easy to reach your headphones and keep your desk clean. The living room, bathroom, closet are some places where this headset hook can be used. You can hang items with it, such as clothes, towels, bags, headsets, hats, belts, etc. The modern black color is very similar to several types of home styles. This headphone stand under the desk is easy to install, you can tighten screws with aPhillips screwdriver or use an electric drill to lock screws into the desk or cabinet surface, sturdy and durable, or you can attach and press with force. The headset hanger is made from high-quality aluminum alloy and has a speciality of heavy-duty, rust-proof, scratch-resistant, and durable to hold two sets of headphones simultaneously. The raised end of the headphones keep them safe from scratching and dropping. The holder is compatible with most over- ear headphones and gaming headphones. 100% customer satisfaction guaranteed. The team has the best service. If there are quality and transportation damage problems, you will get a response within 24 hours and a total replacement or refund service at APPHOME STORE.

Brand: Apphome

👤I intended to mount it using screws. If heat/humidity isn't favorable in your situation, it can be problematic to use solely adhesive. You get an extra one if you have the unit already on the mount. I didn't want to go through the process of removing the glue. I had to peel off the backing to mount it, but it was so difficult that I had to remove part of the mount. It's not clear if that would jeopardize the attachment's strength. I would rather that they don't put the glue on the mount and just let you make your own decision. If you were to use screws with the glue on, the provide screws are too short to have much left inside the mounting surface, which could lead to a failure.

👤I mounted the headset holder to my work desk using the two small screws and the glue already attached to the holder. The holder is elegant in appearance, style and form. The grey color seemed to be compatible with my color scheme. I like that an additional strip is included if I want to relocate the holder, however I wonder if most people throw the additional strip away. I think it's a tough call, maybe most people throw away the two screws. I don't think the mount can be held to any surface with the help of the glue. I put the mount in one location, then realized my screws would need to go through a metal brace, and pulled the mount off the table in order to move it. The screws are difficult to fully tighten without stripping them because of the difficult angle between the base of the mount and the actual hooks, according to another buyer. I agree that I would have liked to have been able to screw the screws into the surface from a different angle, but I didn't have to. The screws should be slightly longer for thos angle. The small screws seem to be enough for the mount to remain attached to my table. While my headset is not heavy, I occasionally bumped the holder and it still held up.

👤The features that made me pick this particular hanger over competitors' product were the beautiful design, superb finish and the options of attachment. Usually, I prefer to mechanically attach hard goods whenever I can over attach them, especially hardware such as brackets, hangers to be surface mounted, and intended to carry a load of reasonable weight indefinitely. I chose this product because of the high performing 3M glue that I could use to place and hold the hanger, and also because I could pre-drill through the factory mounting holes before I screwed it in. It looked like a walk of an install. I used a conventional pistol drill with the smallest drill bit I could find. I had to drill my pilot holes at an angle because of the shallow space between the mounting plate and headset base. When I tried to screw in the smaller wood screws, I found it difficult to maintain the same degree of angle with the screws into the pre-drilled pilot holes. I will change my technique for install #2 so that I don't have the same situation again. The combination of high performance adhesive and two factory engineered mounting holes means that your hanger is going to be there forever and probably as sturdy as the day you installed it. The basic provisions make it easier for a change to be made. Quality engineering of a quality product for anyone who still appreciates quality hardware. Thanks! Drew.

8. Headphone Charger Headset Charging Earphone

Headphone Charger Headset Charging Earphone

If you care about compatibility, style and quality, this gaming accessories is the best choice. It's a great gift for your kids, gaming friends, boyfriends, etc. All in one design, under-desk headphones stand, 3usb charging hub and 4A-20W. Can hold two sets of headphones and keep your headphones out of sight. 3 Port SmartUSB Charger:Detects your device automatically to deliver its fastest possible charge speed up to 2.4 Amps per port or 4 Amps overall. TheSafe Guard is a fire-resistant and hardened plastic outer shell that is built-in premium circuitry and a chip that ensures device safety. Quality Gourmet provides a 90-Day Money Back Guarantee and a 24 month warranty that will ensure you a hassle-free purchasing experience. If there is a quality issue with this headphone rack, please contact them.

Brand: Cozoo

👤Great idea and concept. Didn't find anything else like this. The included wire management tie down clips were helpful. The wire holding cutouts on the parts are very nice. I like the monocolor of the grey outputs that came with mine. It takes a bit to take off with 3M VHB tape. The power line runs below the unit, which would make wire management easier. You can see what I mean by looking at my photo. If the cable ran through the back, it would have been a cleaner look. The power cord is a tad short, as many other users pointed out. It fit my setup well, but I wish it was longer. Great product, all in all. This is definitely an improvement over the previous ones, as it was from a regular under the desk headphones. Would it be interesting if they had a version of this that was not powered so you could connect it to a computer? It's helpful for people with headphones that have ausb type.

👤This is a review for something. Skip the other headphones. You will get more bang for your buck with this. Way better than those overpriced headphones. Get this. You get a better quality hanger and also a charging port for your devices. The price is almost unbelievable when you consider that you don't get cable channels or a portable charging device. What I like. There are two headphone hangers. There is a There are cable channels for earphones. There are threeusb DC chargers! There is a Double-sided or a more permanent screw mounting is what you should use. Includes hooks for tidier desks. The packaging is gorgeous. There is a good separation between the headphones. Inexpensive. Not braided cable is what I don't like. There is a power cable. The power cable is at the bottom. The package has a headphone hanger with pre-applied double-sided tape. Extra double-sided foam tape. There are two screws. Three cable hooks are under the desk. There are printed materials. If you decide to mount using that option, you might need to change the double sided tape on your desk. I highly recommend this product, it has 5 stars out of 5. Hit the comments. This review is for something.

👤It works well. Even when I have my beats headphones, gaming headphones, and watch on it, it's very sturdy. There is a I don't have to worry about how fast it charges, it will work if I use 3 ports at the same time. It will charge on and off at will. I usually charge my devices and watch them at the same time. I'm not sure if it's because of the ipad pro or not.

👤One of theusb ports decided to self destruct. Quality is questionable. Contacting MFG to find out how customer support is. Good quality. The mounting screw-hole would have been blocked if the power cable had been oriented facing backward. A power cable would have solved this issue. The loop is not very noticeable when you mount it back from the desk. The product functions as intended. I wish this had at least one plug.

9. Foldable Headphone Aluminum Headphones Universal

Foldable Headphone Aluminum Headphones Universal

The under desk mount is convenient for storing. Easy installation of a springed C Clamp. For a near universal fit on most desks, the Under Desk Headphone Hanger is used. It can be lain flat on the wall when it is not in use, folding or expanding at your convenience. It is easy to remove and re-attach the screw. Soft rubber pads located on both ends of your desk or table protect it from damage. Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers, shelfs etc. It's great for hanging game controllers, cables and other gadgets. The TV stand does not have room for the soundbar. The sound bar width is less than 2.1 inches, it is 5 lbs and there are two racks to support it. It is a strong headphone Hook because it is made from high quality aluminum and can hold headsets without bending or breaking.

Brand: Apphome

👤My TV stand doesn't have room for the soundbar so I used two racks to hold it. The sound bar is 5 lbs heavy and supported by two racks. I'm happy it worked out.

👤I'm glad I chose this one because there are so many different models to choose from. It has a heavy, solid feel to it, and it has a nice padding on the arm so it won't damage the furniture. It folds up when not in use. Great product! I am an actual consumer, not a fake reviewer.

👤They are very well constructed. I attached them to the end of the stand that holds my TV. I put my sound bar on them. The sound bar is small enough to fit on them, so they can hold it in front of the TV. The sound bar could not be held on the TV stand because there was not enough room.

👤This thing is perfect. My boyfriend's desk has a small lip on the sides that hangs over the sides, but it is a vintage metal desk. Since these holders are mostly designed for desks with empty space below, I had to search through a million to find one that didn't require so much depth for the tension screw. It works great after finding this one. It's easy to install, but will still hold a large clunky headset. The photos have accurate measurements.

👤There are three people working from home, one of them is a gaming son. I'm running out of places to put my headsets, my son has a gaming headset, and I've got my headset for Teams. This particular hook is unique for a couple of reasons. I like the metal construction. It blends in with any black furniture or decor. If it happens to be in a high pass area of your desk or table, the folding design will allow you to get it out of the way. The ability to adjust the orientation from a vertical to horizontal one was a feature that made this a definite purchase. My desk is made of wood and metal and has a lip on it. The standard vertical style brace clap design is useless because it is short of the height of the table. I can't use boom stands with this table because of the other accessories I have. The only thing I had to do was remove the two allen screws and attach them to the leg of the table. It is now a permanent fixture. A huge problem was solved when I reached for my headset. I bought two of them for work and one for home. A great buy.

👤I always remain objective and honest when reviewing products. I always review with information that I feel others would like to know about the product, as I always assume what I'm writing will affect the purchase. I try to go beyond surface characteristics and input into quality, value and application. I will always end the review with an answer as to whether or not I would purchase the item again, which I believe is the most critical question pertaining to the item. Let me know if you want me to review your items. I was looking for a cheap hanging solution for my headphones and this product was the only one I could say anything about. I usually have my headphones on, but it can flip up when not in use. The screw base makes it easy to use for different sizes of desks. I'll probably buy another one for my daughter. It's a very handy device, serves the purpose well, and is cheap, but sturdy. You won't be disappointed.

10. Headphone Universal Sennheiser Audio Technica Controller

Headphone Universal Sennheiser Audio Technica Controller

The package weight was 5.15 lbs. Easy access to your headphones. The long curved support is made of a soft, non-abrasive Silicone cover with a sturdy internal frame. A multi-purpose hanger. It's great for hanging cables, earphones and other gadgets. The max total weight is 1 kilogram. Clean and organized space. Installation is virtually anywhere - on walls, cabinets, glass surfaces, monitors, desktop towers, etc. You should organize and tidy up your workspace. Convenient installation. It uses double-sided tape for strong, reliable adhesion. Clean surface well using provided wipes. Allow the holder to be used for 24 hours. It is not suitable for use on wet, greasy or dusty surfaces.

Brand: Avantree

👤It worked well for a while. One day, I walked into my room and heard a noise. I was trying to figure out what fell, but realized it was my headset. I followed all the directions after having it for less than 3 months. I pressed the alcohol wipes against the sruface to make the surface clean. After hanging it up, I made sure to not use it for 24 hours. It still fell despite all that. They need a better stand. I'll probably buy something to keep it. It was unfortunate it didn't hold up. There is a Customer service contacted me saying my previous 2 star review was detrimental to their reviews. They gave a free replacement. If they think the 2nd will hold up, I'll change the review. I'm not going to change my review if the second product does the same thing as the first. They asked me to send the email back to them, after they lost the previous messages. I did. They responded with nothing relevant to what happened before. I'll take it down to just 1 star now that I know their customer support isn't helpful. This isn't worth the headaches if you buy it from someone else. There are two edits, the first one is called Edit 2. I bought my own double-sided tape and it seems to be holding up well, so it's 3 stars. Customer support is very determined to make sure I like their product. I didn't use the new one because I was expecting the same thing to happen. If you rely on the glue, then you should buy any other glue.

👤I bought this item on December 13th. The stand has begun to separate from the glue. I was expecting this accessory to last as long as I thought it would. I had thought I would get at least 6 months out of it, considering the brand of glue they chose. I always took care to place things on it gently. The back of the rubber/plastic hanger and the desk it is attached to have begun to separate from the glue that is attached to them. The stand was rated 5 out of 5 for its function and 2 out of 5 for its longevity. Customer service was 10/10.

👤I used to get different types of L-shaped things. I changed my mind after reading reviews about people getting dents in their headsets. There is a This thing is awesome. Stick to a wall and it will hold up a heavy, wireless, headset. I attached one to a desk as well. I picked up a set of two for a very competitive price and was happy to return for more, and they were even cheaper. I can't say for certain, but I can say that you get your money's worth. There is a If you feel like you have a heavy headset and need more support, you can get a double-sided mounting tape. There's enough here to support 20 lbs of weight, and 3M makes the absolute best. The back is large enough to double the amount of tape holding up whatever you're trying to hang on the rounded mount. It's cheap for the amount you get.

11. Headphone Headphones Adjustable Universal EURPMASK

Headphone Headphones Adjustable Universal EURPMASK

Customer service is great. Give it a try. You can return it within a month if you don't like it. They will send you a new one if it is faulty within a year. Universal under design allows for a near universal fit on most desks by attaching a thin, narrow, and thick piece of metal to them. It is easy to remove the Spring Clamp. The audible headphone arm swings underneath your desk for discreet and non-intrusive storage and swings back out for easy access. BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs. Soft rubber pads are located on both ends to protect your desk or table from damage. The under desk mount is convenient for storing. Easy installation of a springed C Clamp.

Brand: Eurpmask Choose The Color Of Europe

👤We needed a better solution to keep our headphones from breaking and this was our answer, it's very sturdy and feels very well made, it's even better if you have an xbox one controller, it's even more perfect. My purse is probably around 10 lbs. I'll probably order more for myself and gifts in the future. Highly recommended.

👤The hook portion can bend if you put a lot of weight on it and it is very cheap. There is a The head doesn't lock up. The clip is not tight enough to prevent desk steps that are less than a quarter of an inch from moving. You can get a Brainwavz Hengja Hanger for the same price that has better construction quality. I would've gotten a second one, but I got this instead when the page from my old order suddenly said out of stock and started directly to a screen protectors. I wouldn't buy it again. Cheap, poor construction, plastic bends, top sticks up a lot. A bad product.

👤It's easy to put my headphones out of the way. I didn't want one where you have to use glue or screws. You don't need a heavy duty one if you have light headphones. The mount has a sufficient amount of space. The desk is protected by the padded clamps. The mount has a hook so you don't lose your headphones. You can choose which direction you want to hang your headphones. The cord clip is nice, but it's stiff, so I just wrap it around the hook and grab my headphones when I need them.

👤This thing is great. I was embarrassed that I didn't think of getting this a long time ago, but I did not know it existed. Maybe it didn't. I am a recording artist and I use expensive headphones. They were not taken very well care of in the past, as they would flop around on various surfaces. The device is easy to set up and I like that the hook can be changed to hang things or not. I think it's a good deal so that I can get another one for my other cans. I recommend this to anyone who wants to protect their investment.

👤It was easy to put in place. I got this because I was sick of my headphones laying in random places. The hook is neatly underneath. The picture doesn't show it, but there is a small loop for a cord to go through so I leave my charging chord handing from there so all my cords are close together and easy to manage. You can put the headphones on the hook and swing them out of the way under your desk. I put one on the side table for my headphones.

👤I didn't expect to write a review on this. I thought I knew what I was getting. This is a cheap, easy to scratch plastic. The cable clip would be better not there. The only. The mechanism for twisting the hook into different positions is a nice thing about this. You only need to rotation from 90 degrees and 180 degrees. The hook is pretty loose and you can position it anywhere from 0 to 180. I would have given it a pass, but the junk quality means it should be a lot cheaper than other METAL items. It would be a good deal at five bucks, since I got it for twelve ninety nine. If you don't know better, maybe eight. No way in over ten. I'll probably keep it because it's not worth it with the Pandemic. It will have to do.

Summary

What is the best product for under desk headphone mount?

Under desk headphone mount products from Yocice. In this article about under desk headphone mount you can see why people choose the product. Apphome and New Bee are also good brands to look for when you are finding under desk headphone mount.

What are the best brands for under desk headphone mount?

Yocice, Apphome and New Bee are some of the best brands that chosen by people for under desk headphone mount. Find the detail in this article. 6amlifestyle, Kafri and Link Dream are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com